Entries in Revolver,Single Shot

Umarex Mod 92 A1 and 1911 Tac Airsoft - Barra Schofield Steel BB Pistol Update Video

No Comments

In this Vimeo Replica Airguns Update Video I take a look at three CO2 Airguns, one is a 4.5mm Steel BB revolver distributed by Barra and two are CO2 Blowback Airsoft Pistols distributed by Umarex. All of these CO2 Airguns I have previously reviewed in slightly different versions either barrel length and finish or Steel BB as compared to 6mm Airsoft So checkout why other reviews on similar version Airguns.

The Barra Barra Schofield CO2 BB Revolver is a replica of the Schofield No. 3 single action revolver and utilizes 6 reloadable shells for a very realistic shooting experience. It is very solid in construction bing made mostly out of metal and weighs in at around 2.4 pounds. This version shots 4.5 mm Steel BBs at a velocity of up to 400 fps. It comes in a variety of barrel lengths and finishes so amen sure to have a look in our Online Replica Airguns Store for what we have available

Next up from Umarex is the fully licensed Beretta Pietro Mod. 92 A1 CO2 Blowback Semi and Full Auto Airsoft Pistol, this product is distributed by Umarex but is made by KWC. Another solid metal pistol with a hefty 2.4 pound weigth that holds 21 rounds in its full size drop out metal magazine and offers both semi and full auto shooting at the flick of a switch!

Again from Umarex I showcase the Elite Force 1911 Tac CO2 Blowback Airsoft Pistol and like the Beretta Pietro it too is made in the KWC factory for Umarex. The 1911 Tac as the name suggest is a tactical version of the standard Colt 1911 but with some upgrades like a skeletonized hammer and trigger along with an ambidextrous safety, white dot sights front and back and a picatinny rail on the frame for add ons. You can expect velocity to be somewhere in the 400 fps range and the full size drop out metal magazine holds 15 Airsoft BB’s.

Categories: 4.5mm / .177 cal, 6mm, Airsoft, BB, Blowback, CO2, Full Auto, Pistol, Review, Repeater, Revolver, Semi Auto, YouTube Video Tags: Barra, Schofield No. 3, Bear River, Umarex, Beretta Mod. 92 A1, Beretta, 1911, M1911, 1911 TAC

Crosman Vigilante CO2 Pellet and BB Revolver Field Test Review

No Comments

In this Field Test Shooting Video I test out Crosman’s latest version to the 357 line of CO2 Revolvers and perform both my Velocity and Accuracy test using both .177 caliber Lead Pellets and 4.5mm Steel BB’s to see which ammo has better velocity/power and is most accurate. Also make sure to watch my Table Tope Video Review where I go ver specifications and features and show the Crosman Vigilante CO2 Pellet and BB Revolver up nice and close.

Starting with the velocity portion of my Indoor Field Test Shooting video I placed a brand new 12 gram CO2 into the Crosman Vigilante CO2 Pellet and BB Revolver and tested out some 7 grain .177 caliber Lead Pellets. I was able to average 389 fps in what I would consider normal indoor temperature ranges so you can expect a bit higher velocities in outdoor weather conditions. Moving on the 4.5mm 5.1 grain Steel BB’s, I averaged a bit lower at 360 fps which may seem confusing since the Steel BB’s are lighter than the Lead Pellets? The Lead Pellets fit the barrel much more snug stoping any CO2 from getting around them which helps increase the fps over the Steel BB’s which are a hard metal and need to be slightly smaller in diameter and therefore do let some CO2 get by reducing the pressure behind them.

For my accuracy porting of the the Indoor Field Test I was going to place 6 shots from each magazine into my paper target setup 30 feet down range but ended up using all 10 rounds for the pellet magazine, perhaps because I was just having too much fun :) Since the BB magazine only holds 6 rounds my shot grouping for BB’s only included 6 shots so keep that in mind for the final results. All said and done the Lead Pellets outperformed the Steel BB’s once again getting about a 1.5 inch grouping over the 2.5 inch grouping for the Steel BB’s. And I know the Crosman Vigilante CO2 Pellet and BB Revolver is more than capable of getting a .5 to 1 inch grouping from previous Field Tests I have made using similar 357 type Crosman Revolvers.

The Crosman Vigilante CO2 Pellet and BB Revolver is just one of those must have old school classic Air Pistols I think everyone should own at least some sort of version of. I do like the look of the Vigilante barrel with it’s more modern and aggressive design and functional top and bottom rails for adding on accessories. The ability to choose what ammo type you want to shoot is also a plus and the price point is bang on for a nice CO2 Air powered Revolver.

Categories: 4.5mm / .177 cal, BB, CO2, Field Test, Pellet, Pistol, Review, Revolver, Semi Auto, YouTube Video Tags: Crosman, Vigilante, 357

Crosman Vigilante CO2 Pellet and BB Revolver Table Top Review

No Comments

Type: Pellet & BB Revolver
Manufacturer: Crosman
Model: Vigilante
Materials: Metal and Plastic.
Weight: 2 pounds (908 grams).
Barrel: 6 inches rifled.
Length: 11.36 inches.
Propulsion: CO2 x 1
Action: Revolve , single and double action trigger.
Ammunition Type: 4.5mm Steel BB's / .177 caliber Pellets.
Ammunition Capacity: 6-BB / 10-Pellet round rotary magazines.
FPS: 465-BB’s / 435-Pellets.

Trigger Pull: The trigger pull on the Crosman Vigilante CO2 Pellet and BB Revolver is rather nice in single action with virtually zero take-up and it has a not too light weight with a predictable feel to it. In double action it does get much longer and heavier but still very usable. If you have larger thicker finger then you may want to start off in single action as the finger opening is a bit tight.

Accuracy: I have not specifically tested out the Crosman Vigilante CO2 Pellet and BB Revolver so far but I would be very surprised if it was any different than the standard Crosman 357 I tested back in 2012. Other than the shape of the outer barrel, both of these guns are virtually the same including the frame and the 6 inch barrels. Back in 2012 when I tested out the Crosman 357 I averaged 402 fps using 6.9 grain pellets and was able to get a 1 inch multi-shot grouping at 30 feet away from my paper target. Not sure if this was the entire 10 round mag or not? I will be making an update Field Test Shooting Video so we will see if I can replicate these results with the Crosman Vigilante CO2 Pellet and BB Revolver.

Build Quality: The Crosman Vigilante CO2 Pellet and BB Revolver is a fairly basic pistol that incorporates a plastic outer barrel and inner steel barrel, the grips are also plastic as expected and so are the magazines and sights. Most everything else is metal including the receiver, trigger and hammer. This line of Crosman 357 pistols has been around for decades so you can expect hours of fun and reliable shooting with it.

Realism: There are for sure a lot more realistic looking Revolvers out there with swing out cylinders that except shells just like their real steel counterparts but where the Crosman Vigilante CO2 Pellet and BB Revolver shines is in performance. You will get more shots per CO2, higher fps and better accuracy with the Crosman Vigilante CO2 Pellet and BB Revolver over other more realistic Revolvers on the market.

Pros:

  • Inexpensive Pellet revolver with a proven track record that goes back decades.

  • Good usage of metal parts where you need them most. (Metal  trigger, hammer, frame, barrel, CO2 Tab screw

  • Single and double action trigger for action and more focused shooting.

  • Excellent accuracy and good power with a reasonable amount of shots per CO2.

  • Fully adjustable rear sight.

  • Can mount a bunch of accessories on the picatinny barrel top and bottom rails.

  • CO2 and CO2 tab are nicely hidden and use all metal.

  • Comes with both a Pellet and BB magazine.

Cons:

  • Outer barrel is plastic but very solid. Metal would have added a bit more weight and perhaps better balance?

  • Grips and trigger pull length may be a bit long for smaller handed people when shooting in double action.

  • Not your most realistic revolver in terms of replicas out there but I would say more usable than most.

  • No white dots on the sights.

The Crosman Vigilante CO2 Pellet and BB Revolver is basically a reskinned Crosman 357 at the end of the day but I have to say it is my favorite looking Crosman 357 out there with its aggressive barrel design. And the added bonus are the top and bottom Picatinny rails which make for mounting accessories like Red Dots, Lasers and Tac Lights super easy! if you’re looking for function over realism at a price point that is more than fair then pick yourself up one of the Crosman Vigilante’s from our Replica Airguns Store!

Categories: 4.5mm / .177 cal, BB, CO2, Comparison, Pellet, Pistol, Review, Revolver, Semi Auto, YouTube Video Tags: Crosman, Vigilante, 357, Colt Python 357

Bill C-21 Let's All Make Some Waves

1 Comment

I made a video a little bit ago talking about how Canada’s new Bill C-21 will affect pretty every gun owner in Canada including even airgun owners of BB, Pellet Airsoft and even Paintball Guns. Make sure to watch that video first called Bill C-21 Canada is Going After Your Red Ryder BB Gun.

This video is all about how you can get involved in making some waves by signing two online petitions along with contacting your local Member of Parliament and letting them know your disapproval of Bill C-21 and all that it imposes on law abiding Canadian gun owners.

Probably the most important online petition to sign would be the House of Commons Petition E-3201 Bill C-21 so make sure to sign that one!

The other online e-petition we need to sign is the change.org petition.

And lastly but also super important is to send an email to your local member of Parliament again let them know your disapproval of Bill C-21. I have included a link to the web[age where you can locate your local MP and below that is a template of what you could include in your email to them.

https://petitions.ourcommons.ca/en/Petition/Sign/e-3201

Dear (MP),

I am a constituent in your riding. I am writing to you to voice my concerns over the new provisions that were announced under the proposed Bill C-21, and how this will impact myself, my community and many other Canadians.

"Criminal Code 1 (1) The definition replica firearm in subsection 84(1) of the Criminal Code is replaced by the following:

replica firearm means any device that is designed or intended to exactly resemble, or to resemble with near precision, a firearm that is designed or adapted to discharge a shot, bullet or other projectile at a muzzle velocity exceeding 152.4 m per second and at a muzzle energy exceeding 5.7 Joules, and that itself is not a firearm, but does not include any such device that is designed or intended to exactly resemble, or to resemble with near precision, an antique firearm; (réplique)

(2) Section 84 of the Act is amended by adding the following after subsection (3.1): Certain firearms deemed to be prohibited devices

(3.2) For the purposes of sections 99 to 101, 103 to 107 and 117.03, a firearm is deemed to be a prohibited device if

(a) it is proved that the firearm is not designed or adapted to discharge a shot, bullet or other projectile at a muzzle velocity exceeding 152.4 m per second or at a muzzle energy exceeding 5.7 Joules; and (b) the firearm is designed or intended to exactly resemble, or to resemble with near precision, a firearm, other than an antique firearm, that is designed or adapted to discharge a shot, bullet or other projectile at a muzzle velocity exceeding 152.4 m per second and at a muzzle energy exceeding 5.7 Joules."

Categories: Airgun News, Airsoft, Airsoft News, Blank Gun News, Blank Gun, BB, Gun Law, Gun Safety, Non Airguns, Paintball, Pellet, Pistol, Real Gun, Replica Airguns News, Revolver, Rifle, YouTube Video Tags: Bill C-21

BB - Pellet - Airsoft - Paintball Pistol Power and Accuracy Test

No Comments

I often have people ask me what is more powerful in terms of one gun over another and which Airguns have more raw power, BB versus, Pellet, versus Airsoft, versus Paintball?

Well in this indoor field test shooting video I compare all of the above head to head to see which Airgun not only has the most raw power but also how well they perform on a target setup 30 feet down range since after all what does it matter how powerful a gun is if it can not hit the target!

The Airguns I used in this head to head shooting performance test where as follows:

Keep in mind the ammunition for each Airgun is very different not just in terms of materials but also their weight which will have a big effect on the energy they produce. For example for this test I used 4.6 grain 4.5mm Steel BBs, 4.6 grain 6mm Aluminum Airsoft BB’s. 6.9 grain .177 cal. Lead Pellets and 17.7 grain .50 cal. Rubber Paintballs.

Watch my YouTube Video to see how well each Airgun did in this comparison shooting test!

Categories: .50 cal, 4.5mm / .177 cal, 6mm, Airsoft, BB, Blowback, CO2, Comparison, Field Test, Paintball, Pellet, Pistol, Review, Revolver, Semi Auto, YouTube Video Tags: Umarex, T4E TR50, Desert Eagle, EKOL, ES 55, Cybergun

Diana Bandit PCP .177 Caliber Bolt Action Pellet Pistol Field Test Review

No Comments

Make sure to watch my Table Top Review for the Diana Bandit PCP .177 Caliber Bolt Action Pellet Pistol if you haven’t already done so to get all the specifications and features along with some nice close up video. In this Field Test Shooting video I test out the Diana Bandit PCP .177 Caliber Bolt Action Pellet Pistol to find out what the real world velocity is and also just how accurate it will be shooting a paper target from 30 feet back using a rested shooting position. Since the Diana Bandit PCP .177 Caliber Bolt Action Pellet Pistol is a target pistol I was hoping for good accuracy since the Diana Chaser performed so well for me in my earlier Field Test Shooting video this week. The Diana Bandit does have a claimed 700 fps velocity but I believe this is for the non-Canada detuned version so it will be interesting to find out exactly what the power is.

First up I placed 5 shots through my Chronograph with a fully charged PCP tank using 6.9 grain RWS lead pellets and got just over 500 fps results averaging 517 fps, so yes the Diana Bandit PCP .177 Caliber Bolt Action Pellet Pistol has been detuned to make it Canada non-regulated legal.

Next I performed my accuracy test shooting at a paper target 30 feet down range with the Diana Bandit PCP .177 Caliber Bolt Action Pellet Pistol rested on a sand bag up front and sitting in the back. Since the magazine holds 9 rounds I placed 9 round on the target to see what kind of grouping I could get. At first I was not sure why my 9 shot grouping seemed to be much more spread out than My Dianna Chaser results but after watching the video I saw that only one shot really came out of the 1 inch grouping not including the random accident shot I took. Perhaps I had a misinformed pellet or perhaps I pulled that one shot. That shot aside both the Diana Bandit and Chaser performed about the same, even shooting just a hair to the left from the bullseye.

The trigger feels pretty decent, not super light or to heavy, there is a little bit of take-up and then a slight resistance then a quick release. The bolt action along with the 9 round rotary magazine worked flawlessly for me with no jamming at all. For the low price this PCP Target Pellet Pistol comes in at you really can’t go wrong and if you want to modify or upgrade it down the road there are tons of things you can do to the Diana Bandit PCP .177 Caliber Bolt Action Pellet Pistol. I highly recommend the Diana Bandit PCP .177 Caliber Bolt Action Pellet Pistol if you are looking for a super affordable PCP target pellet pistol.

Categories: .22 cal, 4.5mm / .177 cal, CO2, PCP, Pellet, Pistol, Repeater, Review, Single Shot, YouTube Video Tags: Diana, Bandit

Diana Chaser CO2 .177 Caliber Bolt Action Pellet Pistol Field Test Review

No Comments

Make sure to watch my Table Top Review for the Diana Chaser CO2 .177 Caliber Bolt Action Pellet Pistol if you haven’t already to get all the specifications and features along with some nice close up video. In this Field Test Shooting video I test out the Diana Chaser CO2 .177 Caliber Bolt Action Pellet Pistol to find out what the real world velocity is and also just how accurate it will be shooting a paper target from 30 feet back using a rested shooting position. Since the Diana Chaser CO2 .177 Caliber Bolt Action Pellet Pistol is a target pistol I was hoping for good accuracy but based on the claimed 525 fps velocity I was also hoping for close to 500 fps results.

First up I placed 4 shots through my Chronograph using a brand new CO2 along with 6.9 grain RWS lead pellets and got pretty close to 500 fps results averaging 490 fps, not bad considering the temperature was not super warm and I was using led pellets not hyper velocity alloy pellets.

Next I performed my accuracy test shooting at a paper target 30 feet down range with the Diana Chaser CO2 .177 Caliber Bolt Action Pellet Pistol rested on a sand bag up front and sitting in the back. Since the magazine holds 9 rounds I placed 9 round on the target to see what kind of grouping I could get. I was impressed to see a nice 1 inch grouping, maybe even a little bit less removing the paper tearing. Shots where vertically right on the mark and just a tad to the left but easily fixable with a quick tweak of the full adjustable sights.

The trigger feels pretty decent, not super light or to heavy , there is a little bit of take up and then a slight resistance then a quick release. The bolt action along with the 9 round rotary magazine worked flawlessly for me with no jamming at all. For the low price this CO2 Target Pellet Pistol comes in at you really can’t go wrong and if you want to modify or upgrade it down the road there are tons of things you can do to the Diana Chaser CO2 .177 Caliber Bolt Action Pellet Pistol. I highly recommend the Diana Chaser CO2 .177 Caliber Bolt Action Pellet Pistol if you are looking for a super affordable target pellet pistol.

Categories: 4.5mm / .177 cal, .22 cal, CO2, Field Test, Pellet, Pistol, Review, Repeater, Single Shot, YouTube Video Tags: Diana, Chaser

Diana Chaser CO2 .177 Caliber Bolt Action Pellet Pistol Table Top Review

1 Comment

Type: Pellet Pistol
Manufacturer: Diana.
Model: Chaser
Materials: ABS and Metal.
Weight: 1.9 pounds (862 grams).
Total Length: 13.4 inches (34.3 cm)
Barrel: 8.3 inches (21.8 cm), metal rifled.
Propulsion: CO2.
Action: Bolt.
Ammunition Type: .177 & .22 Caliber pellets.
Ammunition Capacity: Single shot to 9 & 7 round magazines..
FPS: 525 (.177) - 460 (.22).

Trigger Pull: The trigger pull on Diana Chaser CO2 .177 Caliber Bolt Action Pellet Pistol is single action only meaning in order to cock the internal hammer/striker, you need to cycle the bolt back and forth allowing for a short and light trigger action. If you do purchase the rotary magazine the cycling of the bolt will automatically advance a pellet allowing for much quicker followup shots.

Accuracy: At this point I have not personally tested the Diana Chaser CO2 .177 Caliber Bolt Action Pellet Pistol in terms of actual power and accuracy but I expect the Diana Chaser CO2 .177 Caliber Bolt Action Pellet Pistol to perform well since in fact this is a target pistol with fairly high claimed fps. In the next few weeks I plan on making my Field Test Shooting Video so stay posted for the results from that video for confirmation of the performance.

Build Quality: The Diana Chaser CO2 .177 Caliber Bolt Action Pellet Pistol is made in China which might make you wonder about the overall quality of this target pistol but after taking a good look around and working all the mechanical parts I ma very impressed with the overall quality and chosen material that went into the production of the Diana Chaser CO2 .177 Caliber Bolt Action Pellet Pistol. You will finds metal where you need it as in the barrel, bolt and trigger. The pistol grip is plastic and so are portions of the sights which would have been nice if they where all metal.

Realism: Realism isn’t really a concern with the Diana Chaser CO2 .177 Caliber Bolt Action Pellet Pistol since it is not a Replica Airguns but in terms of looking like a gun it serves that purpose, no mistaken that so no waving it around in public or things may not turn out so good for you…

Pros:

  • Very inexpensive fairly high quality full featured target pistol.

  • Expect to have good accuracy and power!

  • Metal construction where it needs to be (Bolt, barrel, trigger).

  • Rifled 8.3 inch barrel.

  • Fully adjustable sights.

  • Adjustable and light single action trigger.

  • Dove tail on bolt for adding optical sight if you want to.

  • Extra storage for a backup CO2 in the pistol grip.

  • Good for small pest control because of fairly high fps and expected good accuracy for shot placement ability.

  • Can be modified/upgraded with a magazine, longer barrel and rifle stock fairly easily.

  • Overall the Airgun feels really high quality for the price.

  • Even comes with a nice soft shell case.

  • Available in both .22 and .177 caliber pellet versions.

Cons:

  • Does not come with magazine, single shot only out of the box.

  • Allen key does not fit the trigger adjustment screw.

  • Made in China.

Comments:

For the price I don’t think you will find anything out there in terms of target pellet pistols with as many features as the Diana Chaser CO2 .177 Caliber Bolt Action Pellet Pistol. At least in the rather low cost price point Diana is offering it at. For that reason it is not going to be the absolute best all around CO2 pellet firing target pistol you can get but I am sure bang for your buck you will be happy with this one. Everything about the Diana Chaser CO2 .177 Caliber Bolt Action Pellet Pistol feels decent quality, I would expect to pay at least double the price for something similar for sure. I have a feeling keeping the Diana Chaser CO2 .177 Caliber Bolt Action Pellet Pistol in stock is going to be a challenge for us so if you see it in stock don’t take too long making up your mind or you may be in for a bit of a wait.

My Vimeo Table Top Review for the Diana Chaser CO2 .177 Caliber Bolt Action Pellet Pistol:

Categories: .22 cal, 4.5mm / .177 cal, CO2, Comparison, Pellet, Pistol, Review, Single Shot, YouTube Video Tags: Diana, Chaser

Tokyo Marui VSR-10 Pro Sniper Spring Bolt Action Airsoft Rifle Table Top Review

No Comments

Type: Airsoft Sniper Rifle
Manufacturer: Tokyo Marui.
Model: VSR-10 Pro
Materials: ABS and Metal.
Weight: 4.6 pounds (2090 grams).
Total Length: 42.3 inches (107.5 cm)
Barrel: 17 inches (43 cm), metal non-rifled.
Propulsion: Spring.
Action: Bolt.
Ammunition Type: 6mm Airsoft BB's.
Ammunition Capacity: 30 round magazine.
FPS: 366.

Trigger Pull: The trigger pull on Tokyo Marui VSR-10 Pro Sniper Spring Bolt Action Airsoft Rifle is nice and short and light as would be expected form a bolt action sniper rifle. The take-up and release are virtually on existent, just nudge your finger a bit and this Airsoft rifle is firing a round down range.

Accuracy: So far I have not tested out the Tokyo Marui VSR-10 Pro Sniper Spring Bolt Action Airsoft Rifle but from what I have seen watching other YouTube videos, it looks to be very accurate right out of the box. The version I have has the Canada import legal heavier spring so it should shout right around 366 fps or a tad higher using .20 gram Airsoft BB’s. I will probably test mine out using heavier Airsoft BB’s when I perform my Field Test Shooting Video for the Tokyo Marui VSR-10 Pro Sniper Spring Bolt Action Airsoft Rifle.

Build Quality: The Tokyo Marui VSR-10 Pro Sniper Spring Bolt Action Airsoft Rifle like all Tokyo Marui products is very well made, there is a lot of plastic in this Airsoft Sniper rifle but it is of good quality, you will find metal in the barrel and bolt areas of course. The trigger, safety and sling attachments are also metal.

Realism: The Tokyo Marui VSR-10 Pro Sniper Spring Bolt Action Airsoft Rifle is based off of your typical bolt action hunting rifle with not a lot fo bells and whistles other than the included adjustable open sights but you can pimp it out with a ton of aftermarket modifications including much suppresses, scope mounts for a scope, bipods and pretty much all the internal parts can be upgraded and swapped out.

Pros:

  • Not a clone so all aftermarket parts will work on and in it.

  • No CO2 or batteries required, ready when you are.

  • Expect excellent accuracy at most ranges.

  • Easy to adjust on the field Hop-up.

  • Super easy to operate bolt action and very nice trigger.

  • Comes with heavier spring installed so more powerful than standard version.

  • Comes with integrated fully adjustable sights, no need for a scope to start shooting.

  • Comes with sling mounts which make it Bipod compatible.

  • No red tip.

Cons:

  • Does not come with scope plate so you will need that if you plan to install a stope on it.

  • Front sight is taped on with double sided tape.

  • Cost is high compared to other Spring powered Airsoft rifles on the market..

Comments:

There are lots of clones out there of the Tokyo Marui VSR-10 Pro Sniper Spring Bolt Action Airsoft Rifle but this is the real deal and so you will pay more for it for sure but you will get Tokyo Marui quality and performance. That can not be said for the clone versions. If you do plan on upgrading yours down the road the Tokyo Marui version will accept all the aftermarket add ons and parts which again the clones may not and so you could end up wasting your money on parts that don’t fit with the other versions. Something to keep in mind when adding up all the costs. One thing to be aware of with the Tokyo Marui VSR-10 Pro Sniper Spring Bolt Action Airsoft Rifle is the bolt is a bit firmer with the upgraded spring dn so you need to make sure it is all the way forward before twisting and releasing. If you don’t it will not lock into place and you will end up scratching the back paint off of the area just in front of the safety, not a big deal, you can always touch it up easy enough.

My Vimeo Table Top Review for theTokyo Marui VSR-10 Pro Sniper Spring Bolt Action Airsoft Rifle:

Categories: 6mm, Airsoft, Review, Rifle, Single Shot Tags: Tokyo Marui, VSR-10 Pro

Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver Field Test Review

3 Comments

Perhaps you might call this a followup video since I already made a full Field Test Shooting Video of the all black version of this pistol and you may wonder if the color of a gun could in some way effect how it performs? Well I don’t think color would really matter but it has been over 6 years since I did my original Field Test Shooting video fo the Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver and so perhaps some things have changed, maybe my shooting is better or worse? At any rate let’s find out.

Also make sure to take a look at my Table top Video for the Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver if you're interested in the specifications and details along with some nice tight close up video of the Airgun.

Starting off with my Chronograph test I was able to get an average 6 shot velocity of 348 fps which is about 40 fps less than my testing 6 years ago of 390 fps, perhaps the temperatures where a bit different? Perhaps the valve setups of the guns was not the same? By the way the temperature was 23 degrees Celsius in the indoor Airgun Sea Can Shooting Range and I was using a brand new 12 gram CO2 along with 5.1 grain zinc coated steel BB’s.

Moving on to the accuracy test, surely I would get a similar 1 inch 6 shot grouping from the Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver, after all it’s been 6 years and I must be a much more advanced shooter… Well there again the Chrome Umarex Colt Python 357 Magnum CO2 BB Revolver did not perform as well as the black one from my 2014 Field Test? Again maybe the steel BB’s I was using where not of the same quality? Maybe I simply had one too many espresso shots? As the video shows this time around I was only able to get about a 2 inch 6 shot grouping from the Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver. Still not bad but I was hoping for better result or at least the same as before.

I could do this test again and get completely different results using perhaps another brand of CO2 on a warmer day with higher quality Steel BB’s and just maybe with me on my game a little bit better? At the end of the day 350 fps is perfectly fine for putting holes in pop cans and a 2 inch group at 30 feet will get you on most targets every time so I’m not going to sweat it too much. If you are looking for a shell loading CO2 BB Revolver the Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver is for sure one of my top picks.

Categories: 4.5mm / .177 cal, BB, CO2, Field Test, Pistol, Review, Revolver, YouTube Video Tags: Umarex, Colt Python 357, KWC, 357, Colt

Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver Table Top Review

6 Comments

Type: BB air revolver
Manufacturer: Umarex.
Model:  Colt Python 375
Materials: Almost entirely all Metal.
Weight: 2.75 pounds (1218 grams).
Barrel: 5.5 inches, metal non-rifled.
Propulsion: 12 gram CO2.
Action: Revolver, single & double actions.
Ammunition Type: 4.5mm steel BB's.
Ammunition Capacity: 6 round cylinder.
FPS: 400.

Trigger Pull: The trigger pull on the Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver is good in both single and double action, it’s nice that you have the shorter lighter single action trigger for slower more accurate shooting but you can also blast away in double action when you feel like it. The hammer on the Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver is firm with not very much wiggle which some other revolvers in this category do have.

Accuracy: Based on my results shooting the Umarex Colt Python 357 which is essentially the same gun in a different finish. The results I got shooting my 6 round group from a 30 foot out semi rested position where good overall. Vertically there was about a 2 inch spread while horizontally there was about a 1 inch spread. I did find the plastic tips on the brass shells seemed to be a bit tight at first and this is when I did most of my Chronograph and target shooting. I believe the tightness effected the consistency of the FPS which also effected the accuracy especially up and down. I did get one shot out of the Umarex Colt Python 357 well over the claimed 400 fps but again the fps was rather erratic most likely because of the snug BB fit due to shell break-in.

Build Quality: The Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver being mostly metal has a very good build quality and is on par with the Dan Wesson 715 shell loading revolver. It has a nice weigth adn balance to it and feels really good in the hand! The only real plastic I could find was in the grips and the shell tips. Fit and finish was also good with no noticeable chrome wear or sloppy workmanship. It will be interesting to see how the Chrome finish wears over time compared to the black finishes fodun on most KWC made Airguns.

Realism: TheUmarex Colt Python 357 Magnum Chrome CO2 BB Revolver overall is a close copy a the real steel Colt Python 357 styled revolver. I did notice the rear portion of the receiver (between the rear cylinder and hammer) to be a bit longer perhaps to accommodate the CO2 valve length, but other than that, this pistol is super close to the original Colt Python 357 styled revolver it is based on. Again being all metal gives this CO2 BB revolver very realistic weight and feel and the loadable brass shells make using this gun almost exactly like using a real shell loading revolver but for much less cost per shot and of course a lot less recoil on the hands and noise to be had.

Pros:

  • Shells loading revolver give you the feeling of loading and shooting a real revolver.

  • Mostly all metal design.

  • Lots of detail, well made, chrome looks nice, not sure if it will wear better than the black finish found on most KWC made pistols?

  • Good overall weight, almost 3 pounds.

  • Should have good overall power, accuracy and shots per CO2 (based on my previous Colt Python testing).

  • Fully adjustable sights.

  • Well hidden CO2 Screw.

  • Recessed barrel.

  • Nice Trigger pull in both single and double action.

Cons:

  • Grips are a bit rough and wood grain is only OK.

  • Grips may be a bit large for people with small hands.

  • Decent enough Colt Python 357 replica but the frame is a bit long between the cylinder and the hammer.

Comments:

It’s been a while since I reviewed a Shell Loading Airgun and this one is pretty much the same Airgun I have reviewed in the past in both the KWC and Umarex Distributed forms. It has been almost 6 years since I took a look at one on my table and it still hods up today. I plan on performing another Field Test Shooting Review for the Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver to see if I can replicate the same good results I did back in 2014 when I tested it out on my deck. If you’re looking for a shell loading revolver in the 357 design then for sure checkout the Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver as an option.

My Vimeo Table Top Review for the Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver:

Categories: 4.5mm / .177 cal, BB, CO2, Pistol, Review, Revolver, YouTube Video Tags: Umarex, 357, Colt Python 357, KWC

Daisy Powerline 340 Spring BB Pistol Table Top Review

3 Comments

Type: BB Pistol.
Manufacturer: Daisy
Model: Powerline 340.
Materials: Mostly metal construction.
Weight: 1 Pound (454 grams).
Barrel Length: 4-5 inches
Total Length: 8.5 inches.
Propulsion: Spring
Action: Single action only.
Ammunition Type: 4.5mm steel BB’s.
Ammunition Capacity: 13/200 round magazine.
Max FPS: 240 fps.

Trigger Pull: The Daisy Powerline 340 Spring BB Pistol has a single action only trigger. You will have to pull the slide back for each shot as this motion draws the spring back and also cocks the hammer. The trigger pull is fairly decent with about a quarter inch of take-up followed by a light predictable release. There will not be any action shooting since the trigger is not double action and the fact that the slide must be pulled back for each shot.

Accuracy: So far I have not made my Field Test Shooting Video for the Daisy Powerline 340 Spring BB Pistol but I did take it outside for some good old plinking to see how it would perform causally shooting in the yard. The Daisy Powerline 340 Spring BB Pistol shot a bit harder than I was expecting it to and I was even able to hit targets a good 50 or so feet away but did have to account for some trajectory arch. Accuracy seemed good in general without a lot of need to adjust my aim point as the sights seemed well centered out of the box which is good since they are not adjustable.

Build Quality: The build quality of the Daisy Powerline 340 Spring BB Pistol is nothing exciting as it is mostly plastic with a metal barrel and perhaps a few other internal metal parts. Being that the Daisy Powerline 340 Spring BB Pistol is mostly plastic it only weighs in at about a pound but feels good in the hand. Everything feels pretty solid on the airgun with good overall fit and finish.

Realism: In terms of realism the Daisy Powerline 340 Spring BB Pistol is a good replica of a Beretta 92 in terms of looks and size comparison. Other than the open slide area that exposes the inner barrel being shorter than a real steel Beretta (probably to accommodate the internal spring) the Daisy Powerline 340 Spring BB Pistol looks very close to a Beretta 92. Moving parts include the slide, hammer, magazine release and slide catch release which is actually the safety. Even the magazine is drop out and near full size. I also like that there are no perceivable screw holes which is usually the case with these types of low cost all plastic Airguns when they are basically two halves slapped and screwed together.

Pros:

  • Pretty decent replica of a Beretta 92 in general.

  • For an inexpensive Airgun  it has a lot of working parts that make it more realistic.

  • Very low cost to buy and operate, no CO2 required (Under $40 in Canada Store right now).

  • Has a recessed barrel for added realism.

  • Single action only trigger is not overly long or heavy.

  • Lots of ammo stored in the internal hopper so no need for a lot reloading.

  • Safety actually looks like part of the gun built into the slide catch release.

  • Full size dropout magazine.

  • Weight and feel of gun are pretty good considering so much plastic.

Cons:

  • Not super high in the fps department.

  • Need to cock the slide for every shot so not going to be an action shooter.

  • Made in China.

Comments:
The Daisy Powerline 340 Spring BB Pistol is one of those low cost yet kind of fun BB guns that as long as you don’t have super high expectations you will get a ton of fun out of for very little cost. At about $40 Canadian with a bit more for some 4.5mm steel BB’s you are ready to shoot all day long. I was a bit surprised at how decent of a little BB gun the Daisy Powerline 340 Spring BB Pistol is. It looks real enough, has a decent build quality to it, actually shoots pretty good with a nice trigger and for such a low cost airgun it has a lot going for it like lots of working parts and even a removable full size magazine that doubles as a 200 round hopper with 13 round internal magazine. I don’t think anyone will be disappointed buying the Daisy Powerline 340 Spring BB Pistol and it would make a perfect first BB gun for a younger person looking to get started out in the sport.

My Vimeo Table Top Review for the Daisy Powerline 340 Spring BB Pistol:

Categories: 4.5mm / .177 cal, BB, Pistol, Review, Single Shot, Spring Piston, YouTube Video Tags: Daisy, Powerline 340

Umarex AirJavelin Archery CO2 Arrow Rifle Field Test Review

No Comments

For this Field Test Shooting Video I actually had to go outside and use my field so in order to have an appropriate amount of distance to properly test the Umarex AirJavelin Archery CO2 Arrow Rifle. My Indoor Airgun Shooting Range is only 30 feet long and my metal backstop was simply not usable for the arrows.

I setup a make ship arrow backstop using a large bag of bark mulch with a rubber matt over top. This setup seemed to work really well for the Umarex AirJavelin Archery CO2 Arrow Rifle allowing the arrows to stick in most of the way. My target was setup around 55 feet away and I was using rested but standing shooting position for my testing.

I decided to combine the Chromo and Accuracy portion of my Field Test Shooting Video for the Umarex AirJavelin Archery CO2 Arrow Rifle by recording each shot on my chronograph while I placed shots on target, why not right? I placed 6 arrows on target with 5 of my shots being recorded by the chronograph. The average fps was only 156, the highest being 183 and lowest being 136. I did experience a bit of a CO2 leak when I first placed my 88 gram CO2 in the Umarex AirJavelin Archery CO2 Arrow Rifle. I believe this was because I did not pull the bolt back which allowed the valve mechanism to be open slightly. I realized this fairly quickly and pulled the bolt back which saved most of the CO2 but I did lose a some. This may have lowered the fps a little bit but I was surprise that the Umarex AirJavelin Archery CO2 Arrow Rifle was recording about half the fps claimed by Umarex. That said the effectiveness of the arrows and penetration into the backstop would for sure get the job done if I was trying to eradicate some small to medium sized pests.

In terms of accuracy I was very impressed with the Umarex AirJavelin Archery CO2 Arrow Rifle. At 55 feet or so I was able to get 5 of the arrows all within 2-3 inches of each other, I did have one arrow drop a little bit lower than the main grouping. I’m not sure if I would want to shoot a pest out at 50-60 feet but it could be done with the Umarex AirJavelin Archery CO2 Arrow Rifle especially if you where to add a nice red dot or optical sight to it. I would think the Umarex AirJavelin Archery CO2 Arrow Rifle would be best suited shooting small to medium game at 30-40 feet which should allow for sub 2 inch groupings.

All in all the Umarex AirJavelin Archery CO2 Arrow Rifle performed well and was a lot more accurate then I was expecting it to be. I was a bit disappointed with the fps as I was hoping for something between 200-300 but again this may have been as a result of low CO2. If your looking for something for small to medium pest control at ranges up to 50 feet or so the Umarex AirJavelin Archery CO2 Arrow Rifle will get the job done nicely. You can also checkout my Table Top Review where I show you around the Umarex AirJavelin Archery CO2 Arrow Rifle and the Umarex AirSaber Archery PCP Arrow Rifle.

Categories: Arrow, CO2, Field Test, Rifle, Review, YouTube Video, Single Shot Tags: Umarex, AirJavelin

Gamo PR-776 CO2 .177 Caliber Pellet Revolver Table Top Review

No Comments

Type: Pellet Revolver.
Manufacturer: Gamo
Model: PR-776.
Materials: Mostly metal construction.
Weight: 2.2 Pounds (1 kg).
Barrel Length: 6 inches
Total Length: 11.5 inches.
Propulsion: CO2 x1
Action: Revolver single and double action.
Ammunition Type: .177 caliber pellets.
Ammunition Capacity: 8 rounds per magazine.
Max FPS: 400+ fps.

Trigger Pull: The Gamo PR-776 CO2 .177 Caliber Pellet Revolver has your traditional revolver single and double action trigger setup. In double action, the trigger is going to be a bit longer and heavier but it feel fairly smooth with no real friction points and I would consider it to have a medium trigger pull. When you cock the hammer back placing the Gamo PR-776 CO2 .177 Caliber Pellet Revolver in single action, the trigger pull becomes very short with virtually no take-up at all and the weight of the trigger is very light allowing for more accurate shots.

Accuracy: Make sure to watch my Field Test Shooting video for the Gamo PR-776 CO2 .177 Caliber Pellet Revolver where I test out the velocity and accuracy in the Replica Airguns Indoor Airgun Shooting Range. In summary the Gamo PR-776 CO2 .177 Caliber Pellet Revolver shot a little bit hotter than claimed at just over 400 fps using around 7 grain lead pellets. In terms of accuracy with a total of 16 shots the grouping spread out to around 4 inches but I am pretty sure a different pellet choice may have made a difference.

Build Quality: The build quality of the Gamo PR-776 CO2 .177 Caliber Pellet Revolver is pretty good overall. It is mostly all metal with the exception of the grips of course, Fit and finishes looks good, everything feel snug adn tight with the exception of the pistol grips. I feel like the grips could easily move out of place and get caught on something. This is not a problem when shooting, more so when in a holster. The Gamo PR-776 CO2 .177 Caliber Pellet Revolver feels good in the hadn't, nice and solid and with a good weight to it.

Realism: The Gamo PR-776 CO2 .177 Caliber Pellet Revolver is a decent looking Airgun in the style of a traditional revolver, I wouldn’t say it’s an exact replica of any specific revolver in production but it does tick off all the boxes in terms of looking realistic. The weight and feel for now and the Gamo PR-776 CO2 .177 Caliber Pellet Revolver also has a recessed barrel and hidden CO2 crew. The only real giveaway would be the cylinder size as it is a bit smaller than expected and of course is chambered for .177 caliber pellets.

Pros:

  • Good power over 400 fps using actual lead pellets.

  • Quicker reloading over shell loading revolvers

  • More shots per magazine reload, 8 versus 6.

  • Comes with two metal 8 round magazines.

  • Traditional single and double action trigger.

  • White dot front sight with fully adjustable rear sight.

  • Good weight and feel to it.

  • Fit and finish look good.

  • Recessed barrel for realistic looking barrel opening.

  • Should be able to use a dovetail type scope mount for adding on a red dot or magnified scope.

Cons:

  • Not a fan of the loose pistol grip setup to access the CO2.

  • Was hoping to get a bit tighter grouping but may have been a pellet choice issue.

Comments:
It was nice reviewing the Gamo PR-776 CO2 .177 Caliber Pellet Revolver as it was a bit different then most of today shell loading revolvers. I like that the Gamo PR-776 CO2 .177 Caliber Pellet Revolver still offered a realistic looking cylinder that the shell loading revolvers have but with the moon clip style magazines that allow for quick adn easy reloading of 8 rounds at a time. The velocity or power of the Gamo PR-776 CO2 .177 Caliber Pellet Revolver was even a bit high than Gamo claims using PBA Platinum pellets since Gamo claims 400 fps using these 5.1 grain lead pellets. My testing with closer to 7 grain pellets yielded fps up and over 400 fps. All the Gamo PR-776 CO2 .177 Caliber Pellet Revolver needs is to be just a little bit more accurate but I feel this may simply be more of a pallet choice, once you find a pellet the Gamo PR-776 CO2 .177 Caliber Pellet Revolver likes I am pretty sure it will deliver accurate shots.

My Table Top Review for the Gamo PR-776 CO2 .177 Caliber Pellet Revolver:

Categories: 4.5mm / .177 cal, CO2, Comparison, Pellet, Pistol, Review, Revolver, YouTube Video Tags: Gamo, PR-776

Gamo PR-776 CO2 .177 Caliber Pellet Revolver Field Test Review

No Comments

Make sure to watch my upcoming Table Top Review for the Gamo PR-776 CO2 .177 Caliber Pellet Revolver where I go over the specifications, pros and cons and show it up nice and close. In this Field Test Shooting Video I determine what the accuracy and velocity of the Gamo PR-776 CO2 .177 Caliber Pellet Revolver by testing out the fps with my Chronograph along with a accuracy test shooting a paper target at a distance of 30 feet away using a rested shooting position.

For the velocity test I placed a brand new CO2 Cartridge in the Gamo PR-776 CO2 .177 Caliber Pellet Revolver and shot five 6.9 grain lead pellets though my Chronograph. Gamo claims their 5.1 grain PBA Platinum pellets will shoot around 400 fps so I was expecting something in the low to mid 300’s but was surprised at a five shot average of 4115 fps with the much heavier RWS6.9 grain pellets. The slowest shot I achieved was 396 fps while the fastest shot was 434 fps. The temperature was right around 24 degrees Celsius or 75 degrees Fahrenheit.

For the next section of my Field Test Shooting Review I setup a brand new paper target 30 feet down range and loaded up two eight round magazines. The results for the Gamo PR-776 CO2 .177 Caliber Pellet Revolver where a bit confusing with both eight round magazines. It seemed like most of the shots wanted to group within about 1-2 inches of each other but I was getting several outliers that extended the grouping to closer to four inches. Not the best performance but as I have found with many guns, sometimes you need to find a pellet that the gun is happy with. the wrong pellet can really make a difference and I am fairly sure this was the case with the Gamo PR-776 CO2 .177 Caliber Pellet Revolver using the RWS pellets. just not the best choice for it.

The Gamo PR-776 CO2 .177 Caliber Pellet Revolver overall performer well, like I said I really think pellet choice will be the deciding factor in how accurate it is going to be. The velocity was very good for a CO2 Pellet revolver considering I was suing actual lead pellets and not the alloy pellets Gamo was using as their reference. The Gamo PR-776 CO2 .177 Caliber Pellet Revolver uses metal eight round magazines which are easy to preload and allow for two additional shots over the more common these days shell loading revolvers, which makes the Gamo PR-776 CO2 .177 Caliber Pellet Revolver more practical as a target pistol allowing for more power and easier loading.

Categories: 4.5mm / .177 cal, CO2, Pellet, Pistol, Review, Revolver, YouTube Video Tags: Gamo, PR-776

Gamo P900 IGT .177 Caliber Pellet Pistol Table Top Review

1 Comment

Type: Break Barrel Pellet Pistol.
Manufacturer: Gamo
Model: P900 IGT.
Materials: Mostly plastic build with some internal metal parts.
Weight: 1.28 Pounds (580 grams).
Barrel Length: 6.25 inches
Total Length: 12.52 inches.
Propulsion: Gas Piston (IGT)
Action: Break barrel single action trigger.
Ammunition Type: .177 caliber pellets..
Ammunition Capacity: 1 round.
Max FPS: 400 fps using PBA Platinum pellets (about 5 grain).

Trigger Pull: The trigger on the Gamo P900 IGT .177 Caliber Pellet Pistol uses what Gamo calls their SAT or Smooth Action Trigger system. Overall the single action only trigger feels pretty good, not super light but also not overly heavy. The Gamo P900 IGT .177 Caliber Pellet Pistol has a short take up with a very predictable release point. I found it fairly easy to use and shoot with precision.

Accuracy: Since I have already performed my Field Test Shooting Video for the Gamo P900 IGT .177 Caliber Pellet Pistol I can tell you how it performed for me, you can also checkout that video review if you like. In summary the Gamo P900 IGT .177 Caliber Pellet Pistol is very cable of getting 1/2 inch groupings for 30 feet away and in terms of power I would say it is a little under the Gamo claim of 400 fps using PBA Platinum pellets (5 grain or so). I tested the Gamo P900 IGT .177 Caliber Pellet Pistol using 7 grain lead pellets and shot just over 300 fps consistently. This is more than enough for target shooting.

Build Quality: The Gamo P900 IGT .177 Caliber Pellet Pistol is mainly made out of plastic, pretty much everything is plastic including the trigger but there will be internal metal parts where they are required. That said the Gamo P900 IGT .177 Caliber Pellet Pistol feels well made with fairly heavy plastic throughout. The Gamo P900 IGT .177 Caliber Pellet Pistol is not super heavy but feels hefty enough in the hand.

Realism: The Gamo P900 IGT .177 Caliber Pellet Pistol is not a replica of any specific pistol in production and has a very modern look to it. I would say it looks more like an airgun than a real gun and that’s exactly what is’t supposed to be so this is not a negative in this case.

Pros:

  • Reasonable price for a target pistol.

  • Performed well, can easily get .5 inch groupings from 30 feet away.

  • No need for CO2.

  • Inert Gas Technology (IGT) has less vibration and no reduction to power over time.

  • Fiber optic front sight.

  • Adjustable rear sight for windage.

  • Inexpensive to shoot.

  • Made in Spain.

  • Ambidextrous design.

  • Reasonable trigger pull.

Cons:

  • Not supper powerful. Shot around 300 fps with standard lead pellets.

  • A bit hard to cock because of such a short barrel.

  • Rear sight is only adjustable for windage and not elevation.

Comments:
The Gamo P900 IGT .177 Caliber Pellet Pistol is a nice overall low cost target pistol with a very modern look and Gas Piston technology. In terms of performance the Gamo P900 IGT .177 Caliber Pellet Pistol tested well for me shooting accurately with a consistent 300 fps velocity which is what you want in a target pistol, consistency over raw power. I like the overall design and look, the Gamo P900 IGT .177 Caliber Pellet Pistol feels good in the hand and easy to shoot, the trigger is not overly light but is also not too heavy by any means. My only complaint is the cocking effort involved because of such a short barrel and I also noticed a bit of a stickiness with the cocking effort but I have a feeling this may break in over time or perhaps a drop of oil in the hinge area may do the trick. If you want a modern looking target pellet pistol with good performance than the Gamo P900 IGT .177 Caliber Pellet Pistol will for sure fit the bill!

My Table Top Review for the Gamo P900 IGT .177 Caliber Pellet Pistol:

Categories: 4.5mm / .177 cal, Pellet, Pistol, Review, Single Shot, Spring Piston, YouTube Video Tags: Gamo, Gamo P900

Gamo P900 IGT .177 Caliber Pellet Pistol Field Test Review

No Comments

For this Field Test Shooting Video Review of the Gamo P900 IGT .177 Caliber Pellet Pistol I test the power and accuracy to determine what the real world (fps) Feet Per Second velocity and how tight of a grouping I can get for 30 feet down range.

For the power portion of my Indoor Filed Test I shot five RWS 6.9 grain lead pellets through my Chronograph with an average velocity of 305 fps. This resulted in a 1.43 foot pound energy rating. My slowest shot out of the Gamo P900 IGT .177 Caliber Pellet Pistol was 289 fps and the fastest shot was 311 fps. Gamo claims the Gamo P900 IGT .177 Caliber Pellet Pistol can achieve 400 fps but this would be using lighter alloy pellets like PBA Platinum pellets.

Next I setup at a fresh paper target 30 feet down range and proceeded to place 8 shots into the target using a seated and rested shooting position. My first shot was a bit high as I was getting use to the trigger but the following 7 shots all grouped within about 3/4 of an inch, 6 of them all within a half inch of each other so the Gamo P900 IGT .177 Caliber Pellet Pistol is for sure capable of 1/5 inch groupings from a 30 foot distance. The placement of the shots grouping was a little bit high and to the left. since the Gamo P900 IGT .177 Caliber Pellet Pistol has an adjustable trigger for windage I could easily center the grouping right in the middle. In terms of elevation there is no adjustment so I would need to manually adjust this on the fly depending on the distance I was shooting at.

The Gamo P900 IGT .177 Caliber Pellet Pistol performed very well for me, the power is what you would expect for a target pistol, I would not recommend the Gamo P900 IGT .177 Caliber Pellet Pistol for any pest control. Accuracy was very good and I feel once getting use to the trigger you shoudl be able to get shots all within a 1/2 inch at 30 feet. The trigger is not super light but by no means is it heavy, the take-up is short with a predictable release, I found the trigger to work well overall. My only complaint is cocking the Gas Spring as the barrel is short and it does take some effort to do this, especially getting it started off, once you get past the first little bit it does get easier to cock. If you’re looking for a nice accurate target pellet pistol at a relatively inexpensive price point then for sure consider the Gamo P900 IGT .177 Caliber Pellet Pistol.

Categories: 4.5mm / .177 cal, Pellet, Pistol, Review, Single Shot, Spring Piston, YouTube Video Tags: Gamo, P900, Gamo P900

Gamo PR-776 - Gamo P-900 - REKT OPfour - JAG Arms Scattergun Preview Video

No Comments

Gamo PR-776 CO2 Pellet Revolver

  • .177 caliber Pellets

  • 8 round rotary magazines x2

  • 12 Gram CO2 x1

  • 6 inch rifled barrel

  • Fixed white dot front, fully adjustable rear sight

  • 2.29 pounds

  • 400 fps

  • Buy in Canada

  • Buy in the US

Gamo P-900 IGT Pellet Pistol

  • .177 caliber Pellets

  • Break Barrel single shot

  • Gas piston (IGT)

  • 6.25 inch rifled barrel

  • Fiber optic front, adjustable rear sight

  • 1.3 pounds

  • 400 fps

  • Buy in Canada

  • Buy in the US

Umarex REKT OPfour CO2 Dart Rifle

  • Nerf Darts 30% faster / 30% farther

  • Pump action

  • CO2 x2

  • 12 round removable magazine

  • Peep sights

  • Adjustable rear stock

  • 90 fps

  • Buy in Canada

  • Buy in the US

JAG Arms Scattergun Green Gas Airsoft Shotgun

  • 6mm Airsoft BB’s

  • 28 round shotgun shell magazines x6

  • Green gas or propane

  • Pump action 3 /6 round burst

  • Pop-up front and back iron sights

  • 6-7 pounds

  • 360 fps

  • Buy in Canada

  • Buy in the US

Categories: 6mm, 4.5mm / .177 cal, Airsoft, Break Barrel, CO2, Gas, Pellet, Pistol, Pump, Review, Revolver, Rifle, Semi Auto, Single Shot, YouTube Video, Spring Piston Tags: Umarex, Gamo, JAG Arms, P-900, PR-776, REKT, REKT OPfour, Scattergun SPX2, Nerf, Gamo P900, P900

Umarex T4E TR50 .50 Caliber Paintball Revolver Field Test Review

No Comments

If you have not already checked out my Table Top Video for the Umarex T4E TR50 .50 Caliber Paintball Revolver then make sure to do so for specifications and a closer look at it.

The Umarex T4E TR50 .50 Caliber Paintball Revolver is an interesting Paintball pistol, it has a very different look and also uses .50 caliber Paintballs which are a little bit less common than the .68 and .43 caliber paintball gun I have been reviewing up until now. The Umarex T4E TR50 .50 Caliber Paintball Revolver is some countries is marketed as a self defense gun but those versions do have a little bit more fps and foot pounds of energy. The version I am testing is not marketed here in Canada or the US as self defense products but rather as more of a training Paintball Gun.

Starting with my Chronograph velocity test I placed 5 Rubber Balls through my Chronograph using a brand new CO2. The Rubber balls I am going to say are a little bit heavier than standard Paintballs and Umarex claims the Umarex T4E TR50 .50 Caliber Paintball Revolver is capable of hitting around 360 fps so with the heavier rubber balls I was expecting a little bit under the max fps. I was able to get an average of 328 fps so not bad at all.

Moving on to my accuracy test. I need up placing 10 of my 12 rounds into the paper target as I had two rounds that went off in what I am going to call an uncontrolled manor. The 10 rubber paintball rounds that did hit my paper target that was setup 30 feet down range all hit within about 6 inches of each other daily well centered left and right and a little bit low on the target. Gettin back to the uncontrolled shots, I had a situation where I pulled the trigger and the Umarex T4E TR50 .50 Caliber Paintball Revolver went click as you would expect but no CO2 was expelled and so no round was shot. I thought perhaps the cylinder was caught up so I went to wiggle it to try and free it up. As I did so the gun went off without my finger anywhere near the trigger. I am glad I was using rubber balls since the rubber ball hit my cabinet leaning a biota a mark but really causing any damage. This happened twice with the same cylinder, the second time I was bit more prepared for it and had the gun pointed well downrange. I was not able to recreate this problem again so perhaps the cylinder magazine was not seated properly but this still concerns me a bit.

Overall I really like the Umarex T4E TR50 .50 Caliber Paintball Revolver, it’s a pretty cool looking Paintball Gun with decent accuracy and power, you can even feel a little push back and barrel lift when you shoot it. I also like that you can preload a CO2 and puncture it whenever hypo are ready to shoot with a quick smack on the bottom of the grip. Just made sure to put the CO2 in the right way :)

Categories: .50 cal, CO2, Field Test, Paintball, Pistol, Review, Revolver, YouTube Video Tags: Umarex, T4E TR50, T4E