Entries in Revolver,Spring Piston

Crosman Vigilante CO2 Pellet and BB Revolver Table Top Review

No Comments

Type: Pellet & BB Revolver
Manufacturer: Crosman
Model: Vigilante
Materials: Metal and Plastic.
Weight: 2 pounds (908 grams).
Barrel: 6 inches rifled.
Length: 11.36 inches.
Propulsion: CO2 x 1
Action: Revolve , single and double action trigger.
Ammunition Type: 4.5mm Steel BB's / .177 caliber Pellets.
Ammunition Capacity: 6-BB / 10-Pellet round rotary magazines.
FPS: 465-BB’s / 435-Pellets.

Trigger Pull: The trigger pull on the Crosman Vigilante CO2 Pellet and BB Revolver is rather nice in single action with virtually zero take-up and it has a not too light weight with a predictable feel to it. In double action it does get much longer and heavier but still very usable. If you have larger thicker finger then you may want to start off in single action as the finger opening is a bit tight.

Accuracy: I have not specifically tested out the Crosman Vigilante CO2 Pellet and BB Revolver so far but I would be very surprised if it was any different than the standard Crosman 357 I tested back in 2012. Other than the shape of the outer barrel, both of these guns are virtually the same including the frame and the 6 inch barrels. Back in 2012 when I tested out the Crosman 357 I averaged 402 fps using 6.9 grain pellets and was able to get a 1 inch multi-shot grouping at 30 feet away from my paper target. Not sure if this was the entire 10 round mag or not? I will be making an update Field Test Shooting Video so we will see if I can replicate these results with the Crosman Vigilante CO2 Pellet and BB Revolver.

Build Quality: The Crosman Vigilante CO2 Pellet and BB Revolver is a fairly basic pistol that incorporates a plastic outer barrel and inner steel barrel, the grips are also plastic as expected and so are the magazines and sights. Most everything else is metal including the receiver, trigger and hammer. This line of Crosman 357 pistols has been around for decades so you can expect hours of fun and reliable shooting with it.

Realism: There are for sure a lot more realistic looking Revolvers out there with swing out cylinders that except shells just like their real steel counterparts but where the Crosman Vigilante CO2 Pellet and BB Revolver shines is in performance. You will get more shots per CO2, higher fps and better accuracy with the Crosman Vigilante CO2 Pellet and BB Revolver over other more realistic Revolvers on the market.

Pros:

  • Inexpensive Pellet revolver with a proven track record that goes back decades.

  • Good usage of metal parts where you need them most. (Metal  trigger, hammer, frame, barrel, CO2 Tab screw

  • Single and double action trigger for action and more focused shooting.

  • Excellent accuracy and good power with a reasonable amount of shots per CO2.

  • Fully adjustable rear sight.

  • Can mount a bunch of accessories on the picatinny barrel top and bottom rails.

  • CO2 and CO2 tab are nicely hidden and use all metal.

  • Comes with both a Pellet and BB magazine.

Cons:

  • Outer barrel is plastic but very solid. Metal would have added a bit more weight and perhaps better balance?

  • Grips and trigger pull length may be a bit long for smaller handed people when shooting in double action.

  • Not your most realistic revolver in terms of replicas out there but I would say more usable than most.

  • No white dots on the sights.

The Crosman Vigilante CO2 Pellet and BB Revolver is basically a reskinned Crosman 357 at the end of the day but I have to say it is my favorite looking Crosman 357 out there with its aggressive barrel design. And the added bonus are the top and bottom Picatinny rails which make for mounting accessories like Red Dots, Lasers and Tac Lights super easy! if you’re looking for function over realism at a price point that is more than fair then pick yourself up one of the Crosman Vigilante’s from our Replica Airguns Store!

Categories: 4.5mm / .177 cal, BB, CO2, Comparison, Pellet, Pistol, Review, Revolver, Semi Auto, YouTube Video Tags: Crosman, Vigilante, 357, Colt Python 357

Bill C-21 Let's All Make Some Waves

1 Comment

I made a video a little bit ago talking about how Canada’s new Bill C-21 will affect pretty every gun owner in Canada including even airgun owners of BB, Pellet Airsoft and even Paintball Guns. Make sure to watch that video first called Bill C-21 Canada is Going After Your Red Ryder BB Gun.

This video is all about how you can get involved in making some waves by signing two online petitions along with contacting your local Member of Parliament and letting them know your disapproval of Bill C-21 and all that it imposes on law abiding Canadian gun owners.

Probably the most important online petition to sign would be the House of Commons Petition E-3201 Bill C-21 so make sure to sign that one!

The other online e-petition we need to sign is the change.org petition.

And lastly but also super important is to send an email to your local member of Parliament again let them know your disapproval of Bill C-21. I have included a link to the web[age where you can locate your local MP and below that is a template of what you could include in your email to them.

https://petitions.ourcommons.ca/en/Petition/Sign/e-3201

Dear (MP),

I am a constituent in your riding. I am writing to you to voice my concerns over the new provisions that were announced under the proposed Bill C-21, and how this will impact myself, my community and many other Canadians.

"Criminal Code 1 (1) The definition replica firearm in subsection 84(1) of the Criminal Code is replaced by the following:

replica firearm means any device that is designed or intended to exactly resemble, or to resemble with near precision, a firearm that is designed or adapted to discharge a shot, bullet or other projectile at a muzzle velocity exceeding 152.4 m per second and at a muzzle energy exceeding 5.7 Joules, and that itself is not a firearm, but does not include any such device that is designed or intended to exactly resemble, or to resemble with near precision, an antique firearm; (réplique)

(2) Section 84 of the Act is amended by adding the following after subsection (3.1): Certain firearms deemed to be prohibited devices

(3.2) For the purposes of sections 99 to 101, 103 to 107 and 117.03, a firearm is deemed to be a prohibited device if

(a) it is proved that the firearm is not designed or adapted to discharge a shot, bullet or other projectile at a muzzle velocity exceeding 152.4 m per second or at a muzzle energy exceeding 5.7 Joules; and (b) the firearm is designed or intended to exactly resemble, or to resemble with near precision, a firearm, other than an antique firearm, that is designed or adapted to discharge a shot, bullet or other projectile at a muzzle velocity exceeding 152.4 m per second and at a muzzle energy exceeding 5.7 Joules."

Categories: Airgun News, Airsoft, Airsoft News, Blank Gun News, Blank Gun, BB, Gun Law, Gun Safety, Non Airguns, Paintball, Pellet, Pistol, Real Gun, Replica Airguns News, Revolver, Rifle, YouTube Video Tags: Bill C-21

BB - Pellet - Airsoft - Paintball Pistol Power and Accuracy Test

No Comments

I often have people ask me what is more powerful in terms of one gun over another and which Airguns have more raw power, BB versus, Pellet, versus Airsoft, versus Paintball?

Well in this indoor field test shooting video I compare all of the above head to head to see which Airgun not only has the most raw power but also how well they perform on a target setup 30 feet down range since after all what does it matter how powerful a gun is if it can not hit the target!

The Airguns I used in this head to head shooting performance test where as follows:

Keep in mind the ammunition for each Airgun is very different not just in terms of materials but also their weight which will have a big effect on the energy they produce. For example for this test I used 4.6 grain 4.5mm Steel BBs, 4.6 grain 6mm Aluminum Airsoft BB’s. 6.9 grain .177 cal. Lead Pellets and 17.7 grain .50 cal. Rubber Paintballs.

Watch my YouTube Video to see how well each Airgun did in this comparison shooting test!

Categories: .50 cal, 4.5mm / .177 cal, 6mm, Airsoft, BB, Blowback, CO2, Comparison, Field Test, Paintball, Pellet, Pistol, Review, Revolver, Semi Auto, YouTube Video Tags: Umarex, T4E TR50, Desert Eagle, EKOL, ES 55, Cybergun

Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver Field Test Review

3 Comments

Perhaps you might call this a followup video since I already made a full Field Test Shooting Video of the all black version of this pistol and you may wonder if the color of a gun could in some way effect how it performs? Well I don’t think color would really matter but it has been over 6 years since I did my original Field Test Shooting video fo the Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver and so perhaps some things have changed, maybe my shooting is better or worse? At any rate let’s find out.

Also make sure to take a look at my Table top Video for the Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver if you're interested in the specifications and details along with some nice tight close up video of the Airgun.

Starting off with my Chronograph test I was able to get an average 6 shot velocity of 348 fps which is about 40 fps less than my testing 6 years ago of 390 fps, perhaps the temperatures where a bit different? Perhaps the valve setups of the guns was not the same? By the way the temperature was 23 degrees Celsius in the indoor Airgun Sea Can Shooting Range and I was using a brand new 12 gram CO2 along with 5.1 grain zinc coated steel BB’s.

Moving on to the accuracy test, surely I would get a similar 1 inch 6 shot grouping from the Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver, after all it’s been 6 years and I must be a much more advanced shooter… Well there again the Chrome Umarex Colt Python 357 Magnum CO2 BB Revolver did not perform as well as the black one from my 2014 Field Test? Again maybe the steel BB’s I was using where not of the same quality? Maybe I simply had one too many espresso shots? As the video shows this time around I was only able to get about a 2 inch 6 shot grouping from the Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver. Still not bad but I was hoping for better result or at least the same as before.

I could do this test again and get completely different results using perhaps another brand of CO2 on a warmer day with higher quality Steel BB’s and just maybe with me on my game a little bit better? At the end of the day 350 fps is perfectly fine for putting holes in pop cans and a 2 inch group at 30 feet will get you on most targets every time so I’m not going to sweat it too much. If you are looking for a shell loading CO2 BB Revolver the Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver is for sure one of my top picks.

Categories: 4.5mm / .177 cal, BB, CO2, Field Test, Pistol, Review, Revolver, YouTube Video Tags: Umarex, Colt Python 357, KWC, 357, Colt

Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver Table Top Review

6 Comments

Type: BB air revolver
Manufacturer: Umarex.
Model:  Colt Python 375
Materials: Almost entirely all Metal.
Weight: 2.75 pounds (1218 grams).
Barrel: 5.5 inches, metal non-rifled.
Propulsion: 12 gram CO2.
Action: Revolver, single & double actions.
Ammunition Type: 4.5mm steel BB's.
Ammunition Capacity: 6 round cylinder.
FPS: 400.

Trigger Pull: The trigger pull on the Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver is good in both single and double action, it’s nice that you have the shorter lighter single action trigger for slower more accurate shooting but you can also blast away in double action when you feel like it. The hammer on the Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver is firm with not very much wiggle which some other revolvers in this category do have.

Accuracy: Based on my results shooting the Umarex Colt Python 357 which is essentially the same gun in a different finish. The results I got shooting my 6 round group from a 30 foot out semi rested position where good overall. Vertically there was about a 2 inch spread while horizontally there was about a 1 inch spread. I did find the plastic tips on the brass shells seemed to be a bit tight at first and this is when I did most of my Chronograph and target shooting. I believe the tightness effected the consistency of the FPS which also effected the accuracy especially up and down. I did get one shot out of the Umarex Colt Python 357 well over the claimed 400 fps but again the fps was rather erratic most likely because of the snug BB fit due to shell break-in.

Build Quality: The Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver being mostly metal has a very good build quality and is on par with the Dan Wesson 715 shell loading revolver. It has a nice weigth adn balance to it and feels really good in the hand! The only real plastic I could find was in the grips and the shell tips. Fit and finish was also good with no noticeable chrome wear or sloppy workmanship. It will be interesting to see how the Chrome finish wears over time compared to the black finishes fodun on most KWC made Airguns.

Realism: TheUmarex Colt Python 357 Magnum Chrome CO2 BB Revolver overall is a close copy a the real steel Colt Python 357 styled revolver. I did notice the rear portion of the receiver (between the rear cylinder and hammer) to be a bit longer perhaps to accommodate the CO2 valve length, but other than that, this pistol is super close to the original Colt Python 357 styled revolver it is based on. Again being all metal gives this CO2 BB revolver very realistic weight and feel and the loadable brass shells make using this gun almost exactly like using a real shell loading revolver but for much less cost per shot and of course a lot less recoil on the hands and noise to be had.

Pros:

  • Shells loading revolver give you the feeling of loading and shooting a real revolver.

  • Mostly all metal design.

  • Lots of detail, well made, chrome looks nice, not sure if it will wear better than the black finish found on most KWC made pistols?

  • Good overall weight, almost 3 pounds.

  • Should have good overall power, accuracy and shots per CO2 (based on my previous Colt Python testing).

  • Fully adjustable sights.

  • Well hidden CO2 Screw.

  • Recessed barrel.

  • Nice Trigger pull in both single and double action.

Cons:

  • Grips are a bit rough and wood grain is only OK.

  • Grips may be a bit large for people with small hands.

  • Decent enough Colt Python 357 replica but the frame is a bit long between the cylinder and the hammer.

Comments:

It’s been a while since I reviewed a Shell Loading Airgun and this one is pretty much the same Airgun I have reviewed in the past in both the KWC and Umarex Distributed forms. It has been almost 6 years since I took a look at one on my table and it still hods up today. I plan on performing another Field Test Shooting Review for the Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver to see if I can replicate the same good results I did back in 2014 when I tested it out on my deck. If you’re looking for a shell loading revolver in the 357 design then for sure checkout the Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver as an option.

My Vimeo Table Top Review for the Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver:

Categories: 4.5mm / .177 cal, BB, CO2, Pistol, Review, Revolver, YouTube Video Tags: Umarex, 357, Colt Python 357, KWC

Daisy Powerline 340 Spring BB Pistol Field Test Review

1 Comment

This Field Test Shooting Review for the Daisy Powerline 340 Spring BB Pistol is a lot different from most of my other shooting video reviews mainly because the Daisy Powerline 340 Spring BB Pistol is not a CO2 powered BB Pistol like pretty much every other 4.5mm Steel BB pistol I have ever tested. There are way more 6mm Airsoft spring pistols but when it comes to actual 4.5mm BB Pistols they are not very common. The Daisy Powerline 340 Spring BB Pistol is Kind of like the pistol version of the Daisy Red Ryder BB Rifle…

I have already made a Table Top Review Video for the Daisy Powerline 340 Spring BB Pistol so make sure to check out that review for specifications and details on the Daisy Powerline 340 Spring BB Pistol.

So let’s get right into the nitty gritty on how the Daisy Powerline 340 Spring BB Pistol performed in the Replica Airguns Indoor Sea Can Airgun Shooting Range. Starting off with the feet per second velocity for the Daisy Powerline 340 Spring BB Pistol Daisy claims around 240 fps. shooting about 8 shots through my chronographs with standard 5.1 grain 4.5,, steel BB’s I was able to get an average of just over 180 fps, the Daisy Powerline 340 Spring BB Pistol was super consistent shooting all shots between 181 and 189 fps.

I then proceeded to place 10 shots on my paper target setup 30 feet down range shooting from a rested portion with a sand bag up front supporting my hadbn’s and a stool to sit on in the back. The Daisy Powerline 340 Spring BB Pistol did shoot a bit low and to the left but all 10 shots grouped within 3 inches of each other, actually a bit better than I was expecting from a low cost BB Pistol like this. If I was shooting at a pop can and adjusted my aim point a bit I would have hit the can 10 out of 10 times which is about as good as you can ask for a plinker like this.

The best way I can describe the Daisy Powerline 340 Spring BB Pistol is the pistol equivalent of the Daisy Re Ryder in that it shoots 4.5mm Steel BB’s has a high capacity BB reservoir that holds lots of BB’s and you are required to cock the spring for each shot rather than use CO2 for power. This makes for an over low cost Airgun but like the Daisy Red Ryder it is a lot fo fun to shoot at the end of the day. The Daisy Powerline 340 Spring BB Pistol has a surprisingly good trigger and at the end of the day shot really consistently for me.

Categories: 4.5mm / .177 cal, BB, Field Test, Pistol, Review, Repeater, YouTube Video, Spring Piston Tags: Daisy, Powerline 340

Daisy Powerline 340 Spring BB Pistol Table Top Review

3 Comments

Type: BB Pistol.
Manufacturer: Daisy
Model: Powerline 340.
Materials: Mostly metal construction.
Weight: 1 Pound (454 grams).
Barrel Length: 4-5 inches
Total Length: 8.5 inches.
Propulsion: Spring
Action: Single action only.
Ammunition Type: 4.5mm steel BB’s.
Ammunition Capacity: 13/200 round magazine.
Max FPS: 240 fps.

Trigger Pull: The Daisy Powerline 340 Spring BB Pistol has a single action only trigger. You will have to pull the slide back for each shot as this motion draws the spring back and also cocks the hammer. The trigger pull is fairly decent with about a quarter inch of take-up followed by a light predictable release. There will not be any action shooting since the trigger is not double action and the fact that the slide must be pulled back for each shot.

Accuracy: So far I have not made my Field Test Shooting Video for the Daisy Powerline 340 Spring BB Pistol but I did take it outside for some good old plinking to see how it would perform causally shooting in the yard. The Daisy Powerline 340 Spring BB Pistol shot a bit harder than I was expecting it to and I was even able to hit targets a good 50 or so feet away but did have to account for some trajectory arch. Accuracy seemed good in general without a lot of need to adjust my aim point as the sights seemed well centered out of the box which is good since they are not adjustable.

Build Quality: The build quality of the Daisy Powerline 340 Spring BB Pistol is nothing exciting as it is mostly plastic with a metal barrel and perhaps a few other internal metal parts. Being that the Daisy Powerline 340 Spring BB Pistol is mostly plastic it only weighs in at about a pound but feels good in the hand. Everything feels pretty solid on the airgun with good overall fit and finish.

Realism: In terms of realism the Daisy Powerline 340 Spring BB Pistol is a good replica of a Beretta 92 in terms of looks and size comparison. Other than the open slide area that exposes the inner barrel being shorter than a real steel Beretta (probably to accommodate the internal spring) the Daisy Powerline 340 Spring BB Pistol looks very close to a Beretta 92. Moving parts include the slide, hammer, magazine release and slide catch release which is actually the safety. Even the magazine is drop out and near full size. I also like that there are no perceivable screw holes which is usually the case with these types of low cost all plastic Airguns when they are basically two halves slapped and screwed together.

Pros:

  • Pretty decent replica of a Beretta 92 in general.

  • For an inexpensive Airgun  it has a lot of working parts that make it more realistic.

  • Very low cost to buy and operate, no CO2 required (Under $40 in Canada Store right now).

  • Has a recessed barrel for added realism.

  • Single action only trigger is not overly long or heavy.

  • Lots of ammo stored in the internal hopper so no need for a lot reloading.

  • Safety actually looks like part of the gun built into the slide catch release.

  • Full size dropout magazine.

  • Weight and feel of gun are pretty good considering so much plastic.

Cons:

  • Not super high in the fps department.

  • Need to cock the slide for every shot so not going to be an action shooter.

  • Made in China.

Comments:
The Daisy Powerline 340 Spring BB Pistol is one of those low cost yet kind of fun BB guns that as long as you don’t have super high expectations you will get a ton of fun out of for very little cost. At about $40 Canadian with a bit more for some 4.5mm steel BB’s you are ready to shoot all day long. I was a bit surprised at how decent of a little BB gun the Daisy Powerline 340 Spring BB Pistol is. It looks real enough, has a decent build quality to it, actually shoots pretty good with a nice trigger and for such a low cost airgun it has a lot going for it like lots of working parts and even a removable full size magazine that doubles as a 200 round hopper with 13 round internal magazine. I don’t think anyone will be disappointed buying the Daisy Powerline 340 Spring BB Pistol and it would make a perfect first BB gun for a younger person looking to get started out in the sport.

My Vimeo Table Top Review for the Daisy Powerline 340 Spring BB Pistol:

Categories: 4.5mm / .177 cal, BB, Pistol, Review, Single Shot, Spring Piston, YouTube Video Tags: Daisy, Powerline 340

Gamo PR-776 CO2 .177 Caliber Pellet Revolver Table Top Review

No Comments

Type: Pellet Revolver.
Manufacturer: Gamo
Model: PR-776.
Materials: Mostly metal construction.
Weight: 2.2 Pounds (1 kg).
Barrel Length: 6 inches
Total Length: 11.5 inches.
Propulsion: CO2 x1
Action: Revolver single and double action.
Ammunition Type: .177 caliber pellets.
Ammunition Capacity: 8 rounds per magazine.
Max FPS: 400+ fps.

Trigger Pull: The Gamo PR-776 CO2 .177 Caliber Pellet Revolver has your traditional revolver single and double action trigger setup. In double action, the trigger is going to be a bit longer and heavier but it feel fairly smooth with no real friction points and I would consider it to have a medium trigger pull. When you cock the hammer back placing the Gamo PR-776 CO2 .177 Caliber Pellet Revolver in single action, the trigger pull becomes very short with virtually no take-up at all and the weight of the trigger is very light allowing for more accurate shots.

Accuracy: Make sure to watch my Field Test Shooting video for the Gamo PR-776 CO2 .177 Caliber Pellet Revolver where I test out the velocity and accuracy in the Replica Airguns Indoor Airgun Shooting Range. In summary the Gamo PR-776 CO2 .177 Caliber Pellet Revolver shot a little bit hotter than claimed at just over 400 fps using around 7 grain lead pellets. In terms of accuracy with a total of 16 shots the grouping spread out to around 4 inches but I am pretty sure a different pellet choice may have made a difference.

Build Quality: The build quality of the Gamo PR-776 CO2 .177 Caliber Pellet Revolver is pretty good overall. It is mostly all metal with the exception of the grips of course, Fit and finishes looks good, everything feel snug adn tight with the exception of the pistol grips. I feel like the grips could easily move out of place and get caught on something. This is not a problem when shooting, more so when in a holster. The Gamo PR-776 CO2 .177 Caliber Pellet Revolver feels good in the hadn't, nice and solid and with a good weight to it.

Realism: The Gamo PR-776 CO2 .177 Caliber Pellet Revolver is a decent looking Airgun in the style of a traditional revolver, I wouldn’t say it’s an exact replica of any specific revolver in production but it does tick off all the boxes in terms of looking realistic. The weight and feel for now and the Gamo PR-776 CO2 .177 Caliber Pellet Revolver also has a recessed barrel and hidden CO2 crew. The only real giveaway would be the cylinder size as it is a bit smaller than expected and of course is chambered for .177 caliber pellets.

Pros:

  • Good power over 400 fps using actual lead pellets.

  • Quicker reloading over shell loading revolvers

  • More shots per magazine reload, 8 versus 6.

  • Comes with two metal 8 round magazines.

  • Traditional single and double action trigger.

  • White dot front sight with fully adjustable rear sight.

  • Good weight and feel to it.

  • Fit and finish look good.

  • Recessed barrel for realistic looking barrel opening.

  • Should be able to use a dovetail type scope mount for adding on a red dot or magnified scope.

Cons:

  • Not a fan of the loose pistol grip setup to access the CO2.

  • Was hoping to get a bit tighter grouping but may have been a pellet choice issue.

Comments:
It was nice reviewing the Gamo PR-776 CO2 .177 Caliber Pellet Revolver as it was a bit different then most of today shell loading revolvers. I like that the Gamo PR-776 CO2 .177 Caliber Pellet Revolver still offered a realistic looking cylinder that the shell loading revolvers have but with the moon clip style magazines that allow for quick adn easy reloading of 8 rounds at a time. The velocity or power of the Gamo PR-776 CO2 .177 Caliber Pellet Revolver was even a bit high than Gamo claims using PBA Platinum pellets since Gamo claims 400 fps using these 5.1 grain lead pellets. My testing with closer to 7 grain pellets yielded fps up and over 400 fps. All the Gamo PR-776 CO2 .177 Caliber Pellet Revolver needs is to be just a little bit more accurate but I feel this may simply be more of a pallet choice, once you find a pellet the Gamo PR-776 CO2 .177 Caliber Pellet Revolver likes I am pretty sure it will deliver accurate shots.

My Table Top Review for the Gamo PR-776 CO2 .177 Caliber Pellet Revolver:

Categories: 4.5mm / .177 cal, CO2, Comparison, Pellet, Pistol, Review, Revolver, YouTube Video Tags: Gamo, PR-776

Gamo PR-776 CO2 .177 Caliber Pellet Revolver Field Test Review

No Comments

Make sure to watch my upcoming Table Top Review for the Gamo PR-776 CO2 .177 Caliber Pellet Revolver where I go over the specifications, pros and cons and show it up nice and close. In this Field Test Shooting Video I determine what the accuracy and velocity of the Gamo PR-776 CO2 .177 Caliber Pellet Revolver by testing out the fps with my Chronograph along with a accuracy test shooting a paper target at a distance of 30 feet away using a rested shooting position.

For the velocity test I placed a brand new CO2 Cartridge in the Gamo PR-776 CO2 .177 Caliber Pellet Revolver and shot five 6.9 grain lead pellets though my Chronograph. Gamo claims their 5.1 grain PBA Platinum pellets will shoot around 400 fps so I was expecting something in the low to mid 300’s but was surprised at a five shot average of 4115 fps with the much heavier RWS6.9 grain pellets. The slowest shot I achieved was 396 fps while the fastest shot was 434 fps. The temperature was right around 24 degrees Celsius or 75 degrees Fahrenheit.

For the next section of my Field Test Shooting Review I setup a brand new paper target 30 feet down range and loaded up two eight round magazines. The results for the Gamo PR-776 CO2 .177 Caliber Pellet Revolver where a bit confusing with both eight round magazines. It seemed like most of the shots wanted to group within about 1-2 inches of each other but I was getting several outliers that extended the grouping to closer to four inches. Not the best performance but as I have found with many guns, sometimes you need to find a pellet that the gun is happy with. the wrong pellet can really make a difference and I am fairly sure this was the case with the Gamo PR-776 CO2 .177 Caliber Pellet Revolver using the RWS pellets. just not the best choice for it.

The Gamo PR-776 CO2 .177 Caliber Pellet Revolver overall performer well, like I said I really think pellet choice will be the deciding factor in how accurate it is going to be. The velocity was very good for a CO2 Pellet revolver considering I was suing actual lead pellets and not the alloy pellets Gamo was using as their reference. The Gamo PR-776 CO2 .177 Caliber Pellet Revolver uses metal eight round magazines which are easy to preload and allow for two additional shots over the more common these days shell loading revolvers, which makes the Gamo PR-776 CO2 .177 Caliber Pellet Revolver more practical as a target pistol allowing for more power and easier loading.

Categories: 4.5mm / .177 cal, CO2, Pellet, Pistol, Review, Revolver, YouTube Video Tags: Gamo, PR-776

Gamo P900 IGT .177 Caliber Pellet Pistol Table Top Review

1 Comment

Type: Break Barrel Pellet Pistol.
Manufacturer: Gamo
Model: P900 IGT.
Materials: Mostly plastic build with some internal metal parts.
Weight: 1.28 Pounds (580 grams).
Barrel Length: 6.25 inches
Total Length: 12.52 inches.
Propulsion: Gas Piston (IGT)
Action: Break barrel single action trigger.
Ammunition Type: .177 caliber pellets..
Ammunition Capacity: 1 round.
Max FPS: 400 fps using PBA Platinum pellets (about 5 grain).

Trigger Pull: The trigger on the Gamo P900 IGT .177 Caliber Pellet Pistol uses what Gamo calls their SAT or Smooth Action Trigger system. Overall the single action only trigger feels pretty good, not super light but also not overly heavy. The Gamo P900 IGT .177 Caliber Pellet Pistol has a short take up with a very predictable release point. I found it fairly easy to use and shoot with precision.

Accuracy: Since I have already performed my Field Test Shooting Video for the Gamo P900 IGT .177 Caliber Pellet Pistol I can tell you how it performed for me, you can also checkout that video review if you like. In summary the Gamo P900 IGT .177 Caliber Pellet Pistol is very cable of getting 1/2 inch groupings for 30 feet away and in terms of power I would say it is a little under the Gamo claim of 400 fps using PBA Platinum pellets (5 grain or so). I tested the Gamo P900 IGT .177 Caliber Pellet Pistol using 7 grain lead pellets and shot just over 300 fps consistently. This is more than enough for target shooting.

Build Quality: The Gamo P900 IGT .177 Caliber Pellet Pistol is mainly made out of plastic, pretty much everything is plastic including the trigger but there will be internal metal parts where they are required. That said the Gamo P900 IGT .177 Caliber Pellet Pistol feels well made with fairly heavy plastic throughout. The Gamo P900 IGT .177 Caliber Pellet Pistol is not super heavy but feels hefty enough in the hand.

Realism: The Gamo P900 IGT .177 Caliber Pellet Pistol is not a replica of any specific pistol in production and has a very modern look to it. I would say it looks more like an airgun than a real gun and that’s exactly what is’t supposed to be so this is not a negative in this case.

Pros:

  • Reasonable price for a target pistol.

  • Performed well, can easily get .5 inch groupings from 30 feet away.

  • No need for CO2.

  • Inert Gas Technology (IGT) has less vibration and no reduction to power over time.

  • Fiber optic front sight.

  • Adjustable rear sight for windage.

  • Inexpensive to shoot.

  • Made in Spain.

  • Ambidextrous design.

  • Reasonable trigger pull.

Cons:

  • Not supper powerful. Shot around 300 fps with standard lead pellets.

  • A bit hard to cock because of such a short barrel.

  • Rear sight is only adjustable for windage and not elevation.

Comments:
The Gamo P900 IGT .177 Caliber Pellet Pistol is a nice overall low cost target pistol with a very modern look and Gas Piston technology. In terms of performance the Gamo P900 IGT .177 Caliber Pellet Pistol tested well for me shooting accurately with a consistent 300 fps velocity which is what you want in a target pistol, consistency over raw power. I like the overall design and look, the Gamo P900 IGT .177 Caliber Pellet Pistol feels good in the hand and easy to shoot, the trigger is not overly light but is also not too heavy by any means. My only complaint is the cocking effort involved because of such a short barrel and I also noticed a bit of a stickiness with the cocking effort but I have a feeling this may break in over time or perhaps a drop of oil in the hinge area may do the trick. If you want a modern looking target pellet pistol with good performance than the Gamo P900 IGT .177 Caliber Pellet Pistol will for sure fit the bill!

My Table Top Review for the Gamo P900 IGT .177 Caliber Pellet Pistol:

Categories: 4.5mm / .177 cal, Pellet, Pistol, Review, Single Shot, Spring Piston, YouTube Video Tags: Gamo, Gamo P900

Gamo P900 IGT .177 Caliber Pellet Pistol Field Test Review

No Comments

For this Field Test Shooting Video Review of the Gamo P900 IGT .177 Caliber Pellet Pistol I test the power and accuracy to determine what the real world (fps) Feet Per Second velocity and how tight of a grouping I can get for 30 feet down range.

For the power portion of my Indoor Filed Test I shot five RWS 6.9 grain lead pellets through my Chronograph with an average velocity of 305 fps. This resulted in a 1.43 foot pound energy rating. My slowest shot out of the Gamo P900 IGT .177 Caliber Pellet Pistol was 289 fps and the fastest shot was 311 fps. Gamo claims the Gamo P900 IGT .177 Caliber Pellet Pistol can achieve 400 fps but this would be using lighter alloy pellets like PBA Platinum pellets.

Next I setup at a fresh paper target 30 feet down range and proceeded to place 8 shots into the target using a seated and rested shooting position. My first shot was a bit high as I was getting use to the trigger but the following 7 shots all grouped within about 3/4 of an inch, 6 of them all within a half inch of each other so the Gamo P900 IGT .177 Caliber Pellet Pistol is for sure capable of 1/5 inch groupings from a 30 foot distance. The placement of the shots grouping was a little bit high and to the left. since the Gamo P900 IGT .177 Caliber Pellet Pistol has an adjustable trigger for windage I could easily center the grouping right in the middle. In terms of elevation there is no adjustment so I would need to manually adjust this on the fly depending on the distance I was shooting at.

The Gamo P900 IGT .177 Caliber Pellet Pistol performed very well for me, the power is what you would expect for a target pistol, I would not recommend the Gamo P900 IGT .177 Caliber Pellet Pistol for any pest control. Accuracy was very good and I feel once getting use to the trigger you shoudl be able to get shots all within a 1/2 inch at 30 feet. The trigger is not super light but by no means is it heavy, the take-up is short with a predictable release, I found the trigger to work well overall. My only complaint is cocking the Gas Spring as the barrel is short and it does take some effort to do this, especially getting it started off, once you get past the first little bit it does get easier to cock. If you’re looking for a nice accurate target pellet pistol at a relatively inexpensive price point then for sure consider the Gamo P900 IGT .177 Caliber Pellet Pistol.

Categories: 4.5mm / .177 cal, Pellet, Pistol, Review, Single Shot, Spring Piston, YouTube Video Tags: Gamo, P900, Gamo P900

Gamo PR-776 - Gamo P-900 - REKT OPfour - JAG Arms Scattergun Preview Video

No Comments

Gamo PR-776 CO2 Pellet Revolver

  • .177 caliber Pellets

  • 8 round rotary magazines x2

  • 12 Gram CO2 x1

  • 6 inch rifled barrel

  • Fixed white dot front, fully adjustable rear sight

  • 2.29 pounds

  • 400 fps

  • Buy in Canada

  • Buy in the US

Gamo P-900 IGT Pellet Pistol

  • .177 caliber Pellets

  • Break Barrel single shot

  • Gas piston (IGT)

  • 6.25 inch rifled barrel

  • Fiber optic front, adjustable rear sight

  • 1.3 pounds

  • 400 fps

  • Buy in Canada

  • Buy in the US

Umarex REKT OPfour CO2 Dart Rifle

  • Nerf Darts 30% faster / 30% farther

  • Pump action

  • CO2 x2

  • 12 round removable magazine

  • Peep sights

  • Adjustable rear stock

  • 90 fps

  • Buy in Canada

  • Buy in the US

JAG Arms Scattergun Green Gas Airsoft Shotgun

  • 6mm Airsoft BB’s

  • 28 round shotgun shell magazines x6

  • Green gas or propane

  • Pump action 3 /6 round burst

  • Pop-up front and back iron sights

  • 6-7 pounds

  • 360 fps

  • Buy in Canada

  • Buy in the US

Categories: 6mm, 4.5mm / .177 cal, Airsoft, Break Barrel, CO2, Gas, Pellet, Pistol, Pump, Review, Revolver, Rifle, Semi Auto, Single Shot, YouTube Video, Spring Piston Tags: Umarex, Gamo, JAG Arms, P-900, PR-776, REKT, REKT OPfour, Scattergun SPX2, Nerf, Gamo P900, P900

Umarex T4E TR50 .50 Caliber Paintball Revolver Field Test Review

No Comments

If you have not already checked out my Table Top Video for the Umarex T4E TR50 .50 Caliber Paintball Revolver then make sure to do so for specifications and a closer look at it.

The Umarex T4E TR50 .50 Caliber Paintball Revolver is an interesting Paintball pistol, it has a very different look and also uses .50 caliber Paintballs which are a little bit less common than the .68 and .43 caliber paintball gun I have been reviewing up until now. The Umarex T4E TR50 .50 Caliber Paintball Revolver is some countries is marketed as a self defense gun but those versions do have a little bit more fps and foot pounds of energy. The version I am testing is not marketed here in Canada or the US as self defense products but rather as more of a training Paintball Gun.

Starting with my Chronograph velocity test I placed 5 Rubber Balls through my Chronograph using a brand new CO2. The Rubber balls I am going to say are a little bit heavier than standard Paintballs and Umarex claims the Umarex T4E TR50 .50 Caliber Paintball Revolver is capable of hitting around 360 fps so with the heavier rubber balls I was expecting a little bit under the max fps. I was able to get an average of 328 fps so not bad at all.

Moving on to my accuracy test. I need up placing 10 of my 12 rounds into the paper target as I had two rounds that went off in what I am going to call an uncontrolled manor. The 10 rubber paintball rounds that did hit my paper target that was setup 30 feet down range all hit within about 6 inches of each other daily well centered left and right and a little bit low on the target. Gettin back to the uncontrolled shots, I had a situation where I pulled the trigger and the Umarex T4E TR50 .50 Caliber Paintball Revolver went click as you would expect but no CO2 was expelled and so no round was shot. I thought perhaps the cylinder was caught up so I went to wiggle it to try and free it up. As I did so the gun went off without my finger anywhere near the trigger. I am glad I was using rubber balls since the rubber ball hit my cabinet leaning a biota a mark but really causing any damage. This happened twice with the same cylinder, the second time I was bit more prepared for it and had the gun pointed well downrange. I was not able to recreate this problem again so perhaps the cylinder magazine was not seated properly but this still concerns me a bit.

Overall I really like the Umarex T4E TR50 .50 Caliber Paintball Revolver, it’s a pretty cool looking Paintball Gun with decent accuracy and power, you can even feel a little push back and barrel lift when you shoot it. I also like that you can preload a CO2 and puncture it whenever hypo are ready to shoot with a quick smack on the bottom of the grip. Just made sure to put the CO2 in the right way :)

Categories: .50 cal, CO2, Field Test, Paintball, Pistol, Review, Revolver, YouTube Video Tags: Umarex, T4E TR50, T4E

Rx Target Systems Field Test Shooting Video

No Comments

It was a pretty nice day today so I got outside and tested out the Rx Target Systems to see how well it worked shooting my Sig Sauer Virtus PCP .22 Caliber Air Rifle at it for about 50 feet down range.

My systems setup for a more powerful airgun as I was shooting .22 caliber lead pellets with about 11-12 foot pounds of energy. Direct hits passing through the 3/4 inch cut outs had no problem laying down the metal paddles and resetting the paddles was a lot easier than I though it would be even way back 50 feet.

I did not have my Sig Sauer Virtus PCP .22 Caliber Air Rifle perfectly sighted in so I did have to aim low and to the left which made it a bit harder dropping the plates but I did manage to get the job done at least for providing a decent test video fo the Rx Target Systems for the purposes of this video.

Make sure to not only watch my Field Test Shooting video included in this post but also checkout my Rx Target Systems Preview Video where I show it up and close and also go into more details on the Rx Target Systems and how modular and versatile it really is.

We hope to have the Rx Target Systems in our Canada and US Online Replica Airguns stores in the near future but until them you can concat Rx Target Systems at their website.

Categories: Accessory, Airsoft, BB, Pellet, Pistol, Review, Rifle, Revolver, Spring Piston, YouTube Video Tags: Rx Target Systems, Sig Sauer Virtus

Rx Target Systems Preview Video

No Comments

I want to thank David Bitkowski from Rx Target Systems for providing me with this sample unit to share with the Replica Airguns community. This video is only a Preview video as I wanted to get the RX Target System out there before I follow up with my actual Table Top and Shooting Videos for it.

For now here are some of the key points I want to get out to everyone:

Mission:
Rx Target Systems are meant to bridge the gap between firearms and airguns. They allow high precision shooting on a reactive, three- dimensional, rugged target that can be carted around in a back pack.  What makes Rx Target Systems unique is that it is a system. It is so modular and adaptable with interchangable faceplates and paddles. Rx Target Systems are not going to break or get dented or dissembled on the range as many of the lighter gauged steel targets on the market today vs today’s high powered airguns.

Modular 

  • One base allows interchange of faceplates for different target configurations 

  • One threaded axel allows interchange of paddle from 10 gauge to 3/8 inch-thick paddles 

Portable 

  • Mount it on a shelf indoors 

  • Mount it on a sawhorse outdoors  

  • Carry it in a backpack or duffle bag- its 10 pounds 

Rugged 

  • Solid steel design 

  • Faceplates from 10 gauge to ¼ inch thick 

3-Dimensional 

  • Faceplate is offset from paddles 

  • Clipping the aperture does not guarantee a score 

Intentions of target configurations 

  • Standard 1 inch bulls.- represents kill zone of many small game at 30 yards, great for sighting in prior to the hunt. Also is ¼ scale of bull used in rapid fire pistol when shot from 8.3 meters. (25 meters distance/100mm bull) 

  • 1.2 inch bulls- represents the 4-10 ring of the NRA 10 meter air rifle target. Gears the shooter to consistently hitting the “black” of that target on paper 

  • AAFTA style- represents common kill zones found in American Airgun Field Target Assosciation using 1.5”, 1”, ¾", ½", and 3/8”.  

  • WFTF style- represents common kill zones found in World Field Target Federation using 15mm, 25mm, and 38mm apertures 

  • 10-15- Inspired by customer request, uses 10mm and 15mm apertures.  High-Precision shooting.

Categories: .20 cal, .22 cal, 4.5mm / .177 cal, 6mm, Accessory, Airgun News, Airsoft News, PCP, Pellet, Pistol, Pump, Replica Airguns News, Review, Revolver, Rifle, Semi Auto, Single Shot, Spring Piston, YouTube Video Tags: Rx Target Systems

Chiappa New Rhino Airgun at Show 2020 Las Vegas

No Comments

chiappa-firearms-vector-logo.png

This isn’t a SHOT Show 2020 Interview but most certainly worth reporting on. While walking around SHOT Show I ventured into the Chiappa Booth as I own a .22 caliber 1911 styled pistol from them and they do have some interesting products to take a look at.

Then I saw a red tip on one of their Chiappa Rhino Revolvers which caught my eye since I was not aware that Chiappa was making an Airgun version of their Rhino. Well as it turns out they are hoping to be shipping both an Airsoft version and Steel BB version around spring time and from what I can tell there will be two finishes, a kind of Gold Satin finish and also a Back finish version. As is with a lot of revolvers these days they will be shell loading which will help them look the part of a real steel Chiappa Rhino Revolver.

Looking forward to getting my hands on one when they come out in Spring this year!

Categories: 4.5mm / .177 cal, 6mm, Airgun News, Airsoft, Airsoft News, BB, CO2, Pistol, Replica Airguns News, Revolver, YouTube Video Tags: Chiappa, Rhino, SHOT Show, SHOT Show 2020

Air Venturi SHOT Show 2020 Las Vegas Interview

No Comments

air-venturi.png

In this SHOT Show Las Vegas 2020 Interview Video Scott takes us through a range of new products from Air Venturi.

Scott and I talk about the Air Venturi TR5 and how it came about to fill the hole the Baikal MP-61 left behind. We also talk a look at some new Air Rifles, a pumper called the Butterfly with a super cool linkage based system that makes pumping a lot easier. A PCP side lever cocking Air Rifle that I’m not even sure has a name yet but will be available in .177 .22 and .25 caliber pellet for around $299 US.

The only Air Venturi replica we looked at is a new Springfield Armory under lever Spring Piston Air rifle modeled after the M1A. Last up Scott went showed us how the Bada Bang targeting system is shaping up and looks to be almost ready for production.

Categories: .22 cal, 4.5mm / .177 cal, Airgun News, Break Barrel, Multi-pump, PCP, Pellet, Pump, Replica Airguns News, Rifle, Single Shot, Spring Piston, YouTube Video Tags: AirVenturi, SHOT Show 2020, SHOT Show

SHOT Show 2020 Las Vegas Teaser Video

No Comments

Here we go again, another round of SHOT Show videos brought to you direct from Replica Airguns!

As always I like to start off with a Teaser Video with a few quick clips of some of the new products I had the opportunity to take a look at at this years SHOT Show 2020 Las Vegas.

I will be rolling out Interview Videos as quickly as I can edit them and put them together for the following Airgun Related companies:

  • Sig Sauer

  • Umarex

  • Crosman - Velocity Outdoors

  • ASG

  • Air Venturi

  • Chiappa

So sit back and enjoy this years Replica Airguns SHOT Show 2020 Las Vegas Teaser Video!

Categories: .22 cal, 4.5mm / .177 cal, 6mm, Airgun News, Airsoft, Airsoft News, BB, Blowback, Bulk Air, CO2, Full Auto, Gas, GBB, Nerf High Impact Round, PCP, Pellet, Pistol, Pump, Replica Airguns News, Revolver, Rifle, Semi Auto, Single Shot, Spring Piston, YouTube Video Tags: SHOT Show, SHOT Show 2020, Umarex, ASG, Crosman, AirVenturi, Sig Sauer, Chiappa

Umarex T4E TR50 .50 Caliber Paintball Revolver Table Top Review

No Comments

Type: Paintball Gun.
Manufacturer: Umarex - T4E.
Model: T4E TR50
Materials: Metal & Polymer.
Weight: 726 grams (1.6 pounds).
Barrel: Smooth bore.
Power Source: 1x12 gram CO2.
Action: Revolver - Double action only trigger.
Ammo Type: .50 Caliber Paintball or Rubber Ball.
Ammo Capacity: 6 Rounds x 5 magazines.
FPS: 360.

Trigger Pull: The trigger pull on Umarex T4E TR50 .50 Caliber Paintball Revolver is double action only but not very long with a very different feel than I am use to. The best way to describe it is kind of lumpy, it starts out a bit firm and then eases off a lot just before it releases. Like climbing a hill and then coasting down the otters side. I will have to see how it feels when it’s all loaded up with CO2 and Paintballs and actually shooting at a target.

Accuracy: So far I have not had the opportunity to test the Umarex T4E TR50 .50 Caliber Paintball Revolver out and before I can do so I need to get myself some .50 caliber rubber Paintballs as all I have on hand right now are .43 and .68 caliber paintballs. Stay posted for my Field Test Shooting Video review for the Umarex T4E TR50 .50 Caliber Paintball Revolver.

Build Quality: The build quality of the Umarex T4E TR50 .50 Caliber Paintball Revolver is good overall. It is a mostly plastic build with some metal parts where they need to be internally. It is essentially two plastic halves held together by screws with the few actual mechanical working external parts. You have the trigger with it’s working trigger safety, the removable magazine and magazine release and of course the quick puncture CO2 screw knob. The hammer is internal. The Umarex T4E TR50 .50 Caliber Paintball Revolver is not very heavy but it does feel really solid in the hand.

Realism: The Umarex T4E TR50 .50 Caliber Paintball Revolver  is not really a replica of any real steel gun that I know of. It does share a lot of similarities with the Umarex Brodax which is a CO2 BB Revolver. The Umarex T4E TR50 .50 Caliber Paintball Revolver is basically a very modern looking revolver. It is not going to fool anyone up close that you actually have a real steel revolver but then again I don’t think if you are shooting it at anyone they are going to want to get all that close to you :)

Purchase it from: The Canada Replica Airguns Store or the US Replica Airguns Store

Pros:

  • Expected fairly high fps power of 360 with .50 caliber paintballs, a bit too high for your average paintball field but perhaps powerful enough to discourage an intruder?

  • Lots of mounting option for accessories like a tac light, laser or other sighting option with it’s upper and lower picatinny rail setup.

  • Quick CO2 pierce system so you can leave a CO2 in it ready to go any time with no worries about CO2 leaking out.

  • Working Trigger Safety.

  • Comes with 5 total magazines you can preload ready for use.

  • Super non-complicated design. Once loaded with CO2 and Paintballs all you need to do is hit the CO2 knob and then pull the trigger.

  • Build quality feels good, the gun is fairly beefy but not overly heavy or hard to hold.

Cons:

  • Mostly all plastic build.

  • Sights do not have white dots on them and are not adjustable.

  • Do not expect a lot of shots per CO2. Will find out when I do my Field Test Shooting Review.

Comments:

The Umarex T4E TR50 .50 Caliber Paintball Revolver is an interesting Paintball gun, overseas versions are marketed as the HDR50 which stands for “Home Defense Revolver”, while the North American version is marketed as the TR50 or “Training Revolver”. This is mainly because in the Europe most countries are not allowed to own real handguns but can own “Self Defense handguns”. In North America as most people are well aware, in the US real handguns are very easy to obtain and can be used for self defense. Just across the border here in Canada we can not really purposely have on hand anything that we plan to use as a weapon for self defense so the Umarex T4E TR50 .50 Caliber Paintball Revolver is marketed as a Training Revolver. What’s the difference? Not much, our North American 360 fps version is a lot like the 7.5 joule German version in terms of power but you can also get a more powerful 11 joule version in the UK. All that said, the Umarex T4E TR50 .50 Caliber Paintball Revolver at least here in Canada is made and marketed as a Paintball gun but on the field may be too powerful? What you decide to do with it is up to you!

Categories: CO2, Paintball, Pistol, Revolver, Review, YouTube Video Tags: Umarex, T4E, T4E TR50