Entries in .68 cal,Replica Airguns News

Umarex T4E HDB .68 Caliber Paintball Shotgun Field Test Review

No Comments

In this Field Test Shooting Video I test out the Umarex T4E HDB .68 Caliber Paintball Shotgun to see what the actual fps is and what kind of accuracy we can get out of these .68 Caliber Rubber balls at 30 feet down range. I have not done a Table Top Video just yet for the Umarex T4E HDB .68 Caliber Paintball Shotgun so stay posted for that upcoming video so stay posted for that, in the meantime you can watch my Preview Videos where I do show it up and close and go over some main specifications.

Starting with the velocity portion of this video I used .68 caliber rubber balls which are not super heavy and not made out of a very hard rubber as you can squish them with your fingers fairly easily. I put 5 rounds through my chronograph after loading a pair of 12 gram CO2 cartriges into the CO2 chamber. My results averaged 176fps which may seem slower than expected but they did hit my target pretty hard pulling the paper in with them. Each round was fairly consistent ranging from 167 to 182 fps trailing off a bit after each shot which is expected.

Moving on to the accuracy portion for the Umarex T4E HDB .68 Caliber Paintball Shotgun, I proceeded to shoot around 10 rounds into my fresh paper target setup 30 feet down range. My target is basically an 8.5 x 11 sheet of paper and my goal was ot get all my shots onto the paper which I easily managed. I was impressed with the grouping from the Umarex T4E HDB .68 Caliber Paintball Shotgun as it performed better than most Paintball guns using rubber balls. The shot placement was a bit lower than I was aiming but all the rounds where within I would say 4-5 inches of each other with no real outliers in the grouping.

All in all the Umarex T4E HDB .68 Caliber Paintball Shotgun performed better than I was expecting, I bit more fps would be nice but the rubber balls do hit the paper with a fair amount of energy, I would for sure not want to get hit by one at close range with light clothing on. The accuracy again was really good for a a paintball rifle and this being one of the lower cost Umarex T4E rifle/shotgun based products it performed as good if not better than much higher priced versions. If you’re looking for a fun Paintball Rifle that won’t break the bank and has a good feature set then pick one up for us!

Categories: .68 cal, CO2, Field Test, Review, Rifle, Semi Auto, Vimeo Video Tags: Umarex, T4E, HDB

Umarex HK P30 - T4E HDB - ASG Dan Wesson 2.5 - KJWorks KP13 Update Preview

No Comments

In this Preview Review Video I take a look at 4 newer products now in our Replica Airguns Online Store. One is a 4.5mm Steel BB Revolver, two are 6mm Airsoft Pistols and one is a .68 caliber Paintball Shotgun.

The first item I take look at in this video is the Umarex HK30 AEG Airsoft Pistol, this product is pretty entry level with analyst all plastic build and is very light to hold. It does however shoot in both semi and full auto since it is an AEG Airsfto Pistol (not many of them out there). The fps is rather low at a claimed fps at just under 200, the Umarex HK30 AEG Airsoft Pistol also comes with two 16 round remove; plastic magazines. Who knows, maybe it will be fun?

Next I take a look at the ASG Dan Wesson 2.5 inch 4.5mm Steel BB Gold Revolver. This is a CO2 powered shell loading BB revolver very much like similar ones I have reviewed in the past but in Gold finish. Will the gold finishes make it perform better, well I guess we better find out!

I then take a look at a “Glock Like” CO2 Blowback Airsoft Pistol for KJWorks called the KP13. It has a full size drop out metal magazine that holds the CO2 along with 24 rounds of 6mm Airsoft BB’s. The KJWorks KP-13 has a metal slide, metal magazine and polymer frame with a velocity over 360fps using the included barrel extension.

Last but perhaps the most interesting for me is the Umarex T4E HDB which is a lower cost Paintball/Rubber Ball Shotgun which could possibly be used for home protection? The T4E HDB is a mostly plastic constructed rifle with decent weight to it and uses an internal spring fed 16 round magazine. You will find all kinds of mounting points for accessories and for a sling on the Umarex T4E HDB and again at much lower cost than similar T4E rifle based Paintball/Rubber ball Airguns.

Categories: .68 cal, 4.5mm / .177 cal, 6mm, AEG, Airsoft, BB, Blowback, CO2, Full Auto, Pistol, Review, Revolver, Rifle, Semi Auto, Vimeo Video Tags: Umarex, T4E, HDB, T4E HDB, HK P30, H&K, KJWorks, KP-13, ASG, Dan Wesson

Where Have I Been Update?

No Comments

This video is primarily for my viewers over on the Replica Airguns channels as I have not posted anything about what's been going on with me the last month and a bit. My Airgun channel does not have very much personal content like my GetFitOver40 channel does, so I wanted to fill them in on where I have been and what's been going on.

In this video I talk about being in the hospital for a month because I was experiencing shortness of breath and a feeling of pressure in my diaphragm area which was later found out to be a heart problem.

Unknown to me I had been born with a Congenital Heart Defect where my Aortic Valve was defective which over time had cause the Aortic Root area to double in size (3cm normal to 6cm).

This defect caused my heart to work a lot harder then normal making it enlarge over time which is not good and reduces it's pumping ability. Before my operation my heart function was below 20%, a normal healthy heart is around 60%.

While in the hospital I had open heart surgery on my Aortic valve replacing it along with a section above it. I also had a Pacemaker/Defibrillator put in. There where a lot of concerns because my heart was also enlarged and not functioning that well, the doctor even said they may not be able to get me off of bypass which would then require an emergency heart transplant. The good news is the operation went well and no need for a new heart at least for now...

I was in the hospital for longer than normal because of my enlarged heart and because of all the stress to it. I was in and out of what's called Atrial Fibrillation. This is when the heart beats very irregularly and faster than normal. It can be short term or longer term and can sort itself out or require intervention to help get back to a Sinus Rhythm. At the time of this post I believe it has gone back to the normal Sinus Rhythm, so fingers crossed it stays this way.

As you can imagine, this has been a life changing event and means my lifestyle will be changing a bit. I will not be doing anything to overstress my heart but that does not mean no more fitness for me, just a different fitness approach. Perhaps a more scaled back approach but I am always up for a challenge and this is no different in terms of how I would approach any challenge in my life.

So if you are a Replica Airguns follower and want to follow my "Road to Recovery" you can do that over on my GetFitOver40 channels. Other than that I will be making regular Airgun Videos moving forward now that I am at home.

Categories: Non Airguns, Replica Airguns News, Vimeo Video Tags:

Umarex T4E HDX .68 Paintball Shotgun Field Test Review

No Comments

In this Field Test Shooting Video I test out the Umarex T4E HDX .68 Paintball Shotgun to find out what the actual fps is and if .68 Caliber Rubber Balls shot out of this Paintball gun are even going to be somewhat accurate at 30 feet out? If you have not already watched my Table Top Video where I go over the details and specifications with some closer up video showing you around the Umarex T4E HDX .68 Paintball Shotgun then make sure to watch it here

Starting with the velocity portion of this video I used .68 caliber rubber balls which are not super heavy and not made out of a very hard rubber as you can squish them with your fingers fairly easily. I put 5 rounds through my chronograph after loading a pair of 12 gram CO2 cartriges into the CO2 chamber. My results averaged 206 fps which may seem slower than expected but they did hit my target pretty hard and actually knocked the cardboard backing right off of it. Each round was fairly consistent ranging from 203 to 210 fps.

Moving on to the accuracy portion of this test I proceeded to shoot around 10 rounds into my fresh paper target setup 30 feet down range. My target is basically an 8.5 x 11 sheet of paper and my goal was ot get all my shots onto the paper which I managed successfully. I would say most of the rounds all hit within about 5-6 inches of each other which for a Paintball Gun is very good! Keep in mind I was shooting using a seated position with the Umarex T4E HDX .68 Paintball Shotgun rested up front on a sand bag.

All in all the Umarex T4E HDX .68 Paintball Shotgun performed really well shooting consistent velocities and also getting all the rounds on an 8.5 x 11 inch target easily at 30 feet away which means if you where shooting at a persons body area you would easily hit it every shot making this a decent close quarters shooter which is what it really would be used for at the end of the day. Could you use it for less lethal home defense? I guess so especially if you can get your hands on pepper balls but I am not sure if regular rubber or paintballs balls would stop someone? Just seeing this impressive shotgun may in fact be more of a deterrent then being shot by it, but if it get’s the job done then why not.

Categories: .68 cal, CO2, Field Test, Paintball, Pump, Review, Rifle, Vimeo Video Tags: Umarex, T4E, T4E HDX

Umarex T4E HDX .68 Paintball Shotgun Table Top Review

No Comments

Type: Paintball Shotgun.
Manufacturer: Umarex - T4E.
Model: HDX .68 Paintball Shotgun.
Materials: Metal & Polymer.
Weight: 6.8 pounds (3.100 kg).
Barrel: 16.2 inches (411.5mm) Metal smooth bore.
Power Source: 2x12 gram CO2.
Action: Pump Action with Internal Magazine.
Ammo Type: .68 Caliber Paintball or Rubber Ball.
Ammo Capacity: 16 Rounds.
FPS: 250-360?

Trigger Pull: The trigger pull on Umarex T4E HDX .68 Paintball Shotgun is a single action only trigger that requires the Pump Action to engage the trigger. Without working the pump the trigger is in the rear portion and does not operate until the Shotgun is pumped, then it pops forward and becomes active. At that point I would say it is fairy short and light, maybe with a little bit of friction but not bad overall. There is also a cross-bolt safety right behind the trigger making it easy to engage and disengage the safety.

Accuracy: So far I have not had the opportunity to test the Umarex T4E HDX .68 Paintball Shotgun but plan a full Field Test Shooting Video shortly. As with most Paintball Airguns they are not going to be super accurate even at 30 feet away. Generally speaking most tests I have done with Paintball guns using rubber balls perform about the same with most of the rubber balls hitting my paper sheet target (8x11) but some even missing completely. In terms of power, on the box Umarex claims 250 fps but I have seen higher velocity specifications on websites including our own so I guess we will find out for sure when I perform my Field Test Shooting Video for the Umarex T4E HDX .68 Paintball Shotgun,

Build Quality: The build quality of the Umarex T4E HDX .68 Paintball Shotgun is very good since this Paintball Shotgun is made for military and law enforcement training use. It has a very good weight and feel to it and has metal parts where you would expect them including the receiver. If you picked this item up along with a real steel Shotgun it would be hard to tell or feel the difference at first inspection.

Realism: The Umarex T4E HDX .68 Paintball Shotgun as far as I know is not an exact replica of any specific Shotgun but it does look like what you would expect to see from a Tactical Styled Pump Action Shotgun. In terms of mechanical working parts everything does what it supposed to do and works as expected.

Purchase it from the Canada Replica Airguns Store or the US Replica Airguns Store

Pros:

  • Expected fairly high fps power of 350+ with .68 caliber paintballs/rubber balls, a bit too high for your average paintball field but perhaps powerful enough to discourage an extruder?

  • Lots of mounting option for accessories like a tac light, laser or other sighting option with its upper and lower picatinny rail setup.

  • Quick CO2 pierce system so you can leave a CO2 in it ready to go any time with no worries about CO2 leaking out.

  • Simple to use Cross Bolt Safety.

  • Nice high capacity 16 round internal magazine.

  • Dual CO2 offers more shots per CO2 change.

  • Build quality feels really good, very solid, with lots of weight to it.

  • Very intimidating looking, just that alone may scare off an intruder.

Cons:

  • Need a tool to load rounds.

  • Will not get lots of shots per dual CO2, around 70 or so but not bad.

  • A bit on the large and bulky side.

Comments:

I am not sure exactly what one would use this Paintball Rifle for but there are a few options. You could use it on the field but with everyone else using high capacity rapid fire Paintball Guns you might be “Out Gunned” to say the least unless of course everyone else was limited in some way to their ammo capacity and rate of fire. Again the Umarex T4E HDX .68 Paintball Shotgun could be used as a non lethal home defense option when combined with the right ammunition type like say some pepper balls? The look of this Shotgun is probably enough to make an intruder get the heck out but I would not count on it. No matter what you plan to use it for it is an awesome Paintball Airgun for sure but just be aware if is not going to be the cheapest option at around $450 Canadian.

Categories: .68 cal, CO2, Paintball, Pump, Review, Vimeo Video Tags: Umarex, T4E HDX

Replica Airguns Huge Mystery Box Unboxing

No Comments

As the title suggest this a video about a Huge Mystery Box so I am not going to say what’s in it, I can say that their are 4 main products mostly rifles per-say. One is a Futuristic Full Auto BB Rifle, one is a Paintball Shotgun, One is an AEG Airsoft Rifle and one is a Replica Break Barrel Pellet Rifle.

So I have a lot of variety here to show everyone! I did absolutely zero research on any of the products I show in this video since like you I had no real idea what was inside other than how many and that most where rifle based.

Enjoy finding out what new products I will be reviewing over the next month with dedicated Table Top and Field Test Shooting videos.

Categories: .68 cal, 4.5mm / .177 cal, 6mm, Airsoft, AEG, Airgun News, Airsoft News, BB, Blowback, Break Barrel, CO2, Full Auto, Paintball, Pellet, Pump, Replica Airguns News, Review, Rifle, Semi Auto, Single Shot, Spring Piston, Vimeo Video Tags: Umarex, Crosman, Specna Arms, Specna Arms Core, T4E HDS, ST-1, HK MP7, RRA SA-C07-PDW

Replica Airguns October 2022 Update

No Comments

I have been making a bunch of instructional videos lately mainly because i have not had a lot of new products to share with everyone, I am expecting 4 new Airguns that where supposed to arrive on Monday but Canada Post has for some reason delayed their arrival and so I am not sure when I will see them? Hopefully very soon!

As soon as they arrive I will make a Preview Video to show off all 4 products, sorry I can not tell you what they are as I don’t know, it’s a surprise for all of us which can be fun opening up a mystery box :) I will also be making dedicated Table Top and Field Test Shooting Videos for all 4 guns which should keep me busy for the next month or so…

On another note I am around 5 weeks out to my latest Fitness Show the Vancouver Fall Classic where I will be competing in Mens Physique and possibly Men’s Classic Physique. This event is taking place local to me in New Westminster BC Canada on November the 12th if anyone is local and wants to check it out!

I mention this because over the next 5 weeks I begin to do the most challenging part of my contest prep which requires a very strict low calorie diet along with a ton of activity (generally weight training 6 day per week with at least 5-6 miles of walking each day). This puts me in a good caloric deficit which enables me to lose around 2 pounds of fat per week which I am hoping will get me to around 5% body fat by show day this time around.

This is not a healthy body fat to be in for any length of time but is what I need to do to be competitive and show off the muscle on stage I have added during my contest prep. Less fat means more muscle detail which makes the muscle look bigger on stage.

This does all come at a cost of me feeling rather like garbage much of the time as my body is thinking I am starving and as expected will try and deter me from this course of action by making me extra hungry and very tired. Also keeping me awake much of the night so I can go out and find food LOL.

So if you notice me looking a little off this is why, I will do my best to still be entertaining and pleasant during my videos but I do get a bit irritated and I often lose my train of thought. You can checkout my Fitness stuff over on my fitness page www.GetFitOver40.com if this type of thing interests you.

Categories: Replica Airguns News, Vimeo Video Tags:

Canadian Temporary Handgun Ban What it Means for Airguns

2 Comments

In this Replica Airguns Video I talk about the latest Canadian Temporary Handgun Ban What it Means for Airguns. I talk about what I think abut it and what it means for Replica Airguns now and in the future.

Canada puts in place temporary handgun import ban!

From: Global Affairs Canada

News release

August 05, 2022 - Toronto, Ontario - Global Affairs Canada

Canadians deserve to feel safe in their communities. That is why the Government of Canada has a comprehensive plan that gets firearms off our streets and more

resources into our communities. A central part of this is the recently introduced Bill C21. The bill addresses the alarming role of guns in gender based violence, gets tough on organized crime and most significantly introduces a national freeze on the sale,

transfer and ownership of handguns, anywhere in Canada.

The Honourable Mélanie Joly, Minister of Foreign Affairs, and the Honourable Marco Mendicino, Minister of Public Safety, today announced a temporary import ban on the importation of restricted handguns. This will help bring the ultimate impact of the national handgun freeze into force sooner. This temporary ban means that individuals and businesses will no longer be able to import handguns into Canada, subject to narrow exceptions that mirror those in Bill C-21. These restrictions will take effect on

August 19th, 2022, and will last until the national freeze comes into force. No single program or initiative can tackle the challenge of gun violence on its own. That is why Bill C-21 and the national freeze on handguns are two of the many elements in the Government’s comprehensive plan to keep Canadians safe. This begins at our borders, where we’ve added resources to fight smuggling and stop guns from coming into Canada. We’re also investing in prevention programs to tackle the root causes of gun crime and stop it before it starts. Finally, we banned assault-style weapons like AR15s, and will soon begin a buyback program to get these weapons of war out of our communities once and for all.

Quotes

“We know that one Canadian killed by gun violence is one too many. As a government, it is our duty to ensure that Canada remains one of the safest places to live in the world. The import ban announced today will help to keep guns stay off our streets as we work towards implementing Bill C-21, reducing gun violence in the immediate term.

- Mélanie Joly, Minister of Foreign Affairs

“My top priority as Minister is keeping Canadians safe in their communities. Today’s announcement is further proof that we are using all tools at our disposal to fight gun crime in this country. It is a key pillar of our plan to address it, along with investments in prevention, action at our borders, a ban on assault-style weapons and Bill C-21 –Canada’s most significant action on gun violence in a generation.”

- Marco Mendicino, Minister of Public Safety

Categories: Airgun News, Gun Law, Gun Safety, Non Airguns, Pistol, Real Gun, Replica Airguns News, Vimeo Video Tags:

I Got The Rona

No Comments

After about 4 years or so of not getting sick at all, I was almost starting to think I was impervious to viruses and colds and flues and then it finally happened… I got the Rona.

Now I am not 100% sure if it is the Rona since I have not been tested yet but all signs indicate it’s probably Omicron. I have ordered some antibody tests that I expect to come in shortly, I will be checking my blood for Covid-19 Antibodies once I know my body has had enough time to make them after getting sick this time.

In this video I talk about my symptoms and how I felt start to finish getting the Rona. I can say at least for me it was not big deal, the soar throat was probably the worst of it for me.

Categories: Non Airguns, Replica Airguns News, Vimeo Video Tags:

Merry Christmas and Happy New Year 2021-2022

1 Comment

I wanted to wish everyone a Merry Christmas and a Happy new Year. I celebrate traditional Christmas but you may not or perhaps celebrate something different, whatever you are doing over the holidays I wash you all the best.

This is going to be a tough holiday season for many with everything going on this year and many people are going to be alone or at least feel very alone. I want everyone to remember we all want the same thing at the end of the day no matter what your belief are about the current situation. Please try to be loving with your family and friends even if you have very different views.

At the end of the day we all want life to go back to some sort of normal and so far what we have been doing has not been working. Maybe it's time for some changes to be made...

Categories: Replica Airguns News, Vimeo Video Tags:

Termination of the Replica Airguns YouTube Channel

12 Comments

In this our first dedicated video made to be uploaded to our New Replace Airguns Vimeo page, I talk about what exactly happened to us over on YouTube at least forma eh very little info we have what I feel happened which is still very confusing and we are still trying o make sense of it all…

I cover the initial email we received from YouTube on July 22nd at 12:18 am that our Replica Airguns YouTube channel of some 15 years with over 1000 Videos uploaded, some 350+ thousand subscribers and around a half billion videos views had been been terminated just like that! Apparently there was a Countrified Claim made, whom that was from and what product/s are in question is still a huge mystery to us.

I also read off our appeal that we presented to YouTube / Google LLC but that appeal in turn was denied quickly, probably an automated generic response, not even sure if a real person even looked at to be honest.

I slo mention an email we received for YouTube a little bit before all of this happened basically stating that gun videos will start to get strikes on them as YouTube has detrained any type of gun related video is against their policies so it will not be long until all gun related YouTube channels are gone, be warned. YouTube is pushing hard the leftist agenda on their platform so if you view yourself as a more right wing individual you may have to satin looking to other platform to get your Video information from…

Categories: Airgun News, Airsoft News, Blank Gun News, Replica Airguns News Tags:

YouTube Channel Termination Appeal

5 Comments

YouTube Termination.jpg

I made an Appeal to YouTube several days ago regarding their “Counterfeit Complaint” and subsequent termination of our Replica Airguns YouTube Channel but have not yet heard back from them yet?

If anyone out there has any sort of connection or influence with the powers that be within YouTube, I ask that you reach out to them on our behalf. Our Replica Airguns Channel and future presence within the Airgun community is hanging on a thread as we had so much of our business invested with YouTube.

Below is a copy of the Channel Termination Appeal I sent to YouTube, it would have been longer but it needed to stay within 1000 characters as per their limitations:

“I was notified July 22nd that because of a Counterfeit Complaint our YouTube channel of some 15 years with 350,000 subscribers, a half a billion videos views and 1000+ videos published had been terminated.

On the charge of a Counterfeit Complaint. We have never had such a claim made to our channel as we do not sell or promote counterfeit products on our YouTube channel, online store, or website.

www.replicaairguns.ca

www.replicaairguns.us

We only sell licensed products that we buy directly from companies that own licenses to sell such products. For example: Umarex, Crosman, Daisy, ASG, Sig Sauer, Gletcher, Air Venturi, Cybergun… to name a few.

If we are in violation of a Counterfeit Claim then all the above mentioned companies should also be in violation and have their YouTube channels terminated? Along with every other YouTube channel that reviews/sells any Airgun/Airsoft gun that resembles a real gun and that also sells such products from the above mentioned licensed companies.”

Categories: Airgun News, Airsoft News, Blank Gun News, Replica Airguns News, Gun Law Tags:

Air Venturi HPA Tank - KJWorks M9A1 GBB - EMG Combat Master - Crosman P1 - ASG TAC-6 Update Preview Video

No Comments

In this Update Preview Unboxing Video I take a look at 5 products that came across my table and that I have not reviewed so far on the Replica Airguns YouTube channel.

First I show off an HPA tank from Air Venturi that works perfectly for the Sig Sauer MPX and MCX Pellet Rifles allowing for more consistent fps and I would image a higher overall fps? We will find out when I test it out in the replica Airguns Indoor Sea Can Airgun Range.

  • 13 Oz Aluminum

  • 10 Inches Long

  • 2 Inches Diameter

  • Integrated Pressure Gauge

  • Includes Buttstock

  • CO2 Adaptor Included

  • 3000 PSI Fill

  • 1100 PSI Regulated

Next I take a look at the KJWorks M9A1 GBB Airsoft Pistol, I hover revived the CO2 version before but this version comes with the Gas magazine rather than the CO2 mag for those that prefer gas operated Blowback Airsoft Pistols. Because of the slightly lower FPS the Gas version comes with a barrel extension to make it Canada import friendly.

  • 6mm Airsoft BB’s

  • Green Gas / Propane

  • 370 fps

  • 25 Round Magazine

  • 2 Pounds

Probably one of the most interesting product I look at in this video at least for me is the EMG JW3 Combat Master GBB Airsoft Pistol. This Airsoft pistol is mainly aluminum with some polymer based off of the 2011 STI and was featured in the 2019 John Wick 3 Film. I’m really looking forward to testing this one out in the Sea Can Replica Airguns Airgun Range!

  • 6mm Airsoft BB’s

  • Green Gas / Propane

  • 9.4 Inches

  • 366 fps

  • 28 Round Magazine

  • 2.4 Pounds

Moving along to another Air Pistol I finally get my hands on the Crosman P1 which is really just a KWC PT92 4.5mm Blowback CO2 BB Pistol but with Crosman Branding and an included laser. Since I have never shot a PT92 BB Pistol with a laser I will probably make a Field Test Shooting Video to see how well it performs.

  • 4.5 mm Steel BB’s

  • CO2 x 1

  • 4.2 Inch Barrel

  • 330 fps

  • 19 Round Magazine

  • 2.4 Pounds

  • Comes with Laser Sight

Last up I take a look at the ASG TAC-6 which is pretty much the exact same ASG TAC-4.5 CO2 Air Rifle I tested a while back but in this case the 6 refers to it being a 6mm Airsoft Rifle rather than a 4.5mm Steel BB Riffle. I am not sure I will do a full Table Top Video since these guns are virtually identical but just in different Ammo types but I hope to get outside and see how well it performs shooting at a bit more distance than the 30 foot indoor range I usually test my Airgun in.

  • 6mm Airsoft BB’s

  • CO2 x 1

  • 36 Inches

  • 440 fps

  • 15 Round Magazine

  • 3.5 Pounds

Categories: 4.5mm / .177 cal, 6mm, Accessory, Airsoft, BB, Blowback, Bulk Air, CO2, Gas, GBB, PCP, Pistol, Replica Airguns News, Review, Rifle, Semi Auto, YouTube Video Tags: AirVenturi, KJWorks, M9A1, EMG, Combat Master, Crosman, Crosman P1, ASG, TAC-6

Bill C-21 Let's All Make Some Waves

1 Comment

I made a video a little bit ago talking about how Canada’s new Bill C-21 will affect pretty every gun owner in Canada including even airgun owners of BB, Pellet Airsoft and even Paintball Guns. Make sure to watch that video first called Bill C-21 Canada is Going After Your Red Ryder BB Gun.

This video is all about how you can get involved in making some waves by signing two online petitions along with contacting your local Member of Parliament and letting them know your disapproval of Bill C-21 and all that it imposes on law abiding Canadian gun owners.

Probably the most important online petition to sign would be the House of Commons Petition E-3201 Bill C-21 so make sure to sign that one!

The other online e-petition we need to sign is the change.org petition.

And lastly but also super important is to send an email to your local member of Parliament again let them know your disapproval of Bill C-21. I have included a link to the web[age where you can locate your local MP and below that is a template of what you could include in your email to them.

https://petitions.ourcommons.ca/en/Petition/Sign/e-3201

Dear (MP),

I am a constituent in your riding. I am writing to you to voice my concerns over the new provisions that were announced under the proposed Bill C-21, and how this will impact myself, my community and many other Canadians.

"Criminal Code 1 (1) The definition replica firearm in subsection 84(1) of the Criminal Code is replaced by the following:

replica firearm means any device that is designed or intended to exactly resemble, or to resemble with near precision, a firearm that is designed or adapted to discharge a shot, bullet or other projectile at a muzzle velocity exceeding 152.4 m per second and at a muzzle energy exceeding 5.7 Joules, and that itself is not a firearm, but does not include any such device that is designed or intended to exactly resemble, or to resemble with near precision, an antique firearm; (réplique)

(2) Section 84 of the Act is amended by adding the following after subsection (3.1): Certain firearms deemed to be prohibited devices

(3.2) For the purposes of sections 99 to 101, 103 to 107 and 117.03, a firearm is deemed to be a prohibited device if

(a) it is proved that the firearm is not designed or adapted to discharge a shot, bullet or other projectile at a muzzle velocity exceeding 152.4 m per second or at a muzzle energy exceeding 5.7 Joules; and (b) the firearm is designed or intended to exactly resemble, or to resemble with near precision, a firearm, other than an antique firearm, that is designed or adapted to discharge a shot, bullet or other projectile at a muzzle velocity exceeding 152.4 m per second and at a muzzle energy exceeding 5.7 Joules."

Categories: Airgun News, Airsoft, Airsoft News, Blank Gun News, Blank Gun, BB, Gun Law, Gun Safety, Non Airguns, Paintball, Pellet, Pistol, Real Gun, Replica Airguns News, Revolver, Rifle, YouTube Video Tags: Bill C-21