Type: Airsoft AEG.

Manufacturer: Bolt Airsoft.

Model:B4A1 with BRRS (Bolt Recoil Shock System).

Materials: Metal & Nylon.

Weight: 6 pounds.

Barrel: 15 inches, metal.

Propulsion: AEG with BRSS

Action: Semi/full auto, single action.

Ammunition Type: 6mm Plastic Airsoft BB (recommended .20 gram plus).

Ammunition Capacity: 300+ round magazine.

FPS: 366-400.

Trigger Pull: The trigger pull on the Bolt Airsoft B4A1 is fairly short and light as it is essentially just an on off switch for the internal electronic components. You can shoot this gun very quickly in semi auto mode, and of course in full auto when full auto position is selected. As is with all AEG rifles there is a bit of a delay while the spring is retracted and released, this is not as noticeable in full auto.

Accuracy: I tested the B4A1 Airsoft rifle by putting around 10 rounds into a target from 30 feet with .36 gram Airsoft 6mm BB's while using a semi rested position (sand bag in the front - standing in the rear). I used a non-magnified red dot scope for this test rather than using the built in iron sights. I got very good result in semi auto and even with the recoil making my sights jump around a bit in full auto still stayed well centered on target and got about a 1.5 inch group in both semi and full auto. My chronograph testing with lighter .20 gram BB's resulted in a 421 fps 5 shot average.

Build Quality: The Bolt Airsoft B4A1 Metal AEG Carbine is very well made with a full Metal upper and lower receiver, along with metal and polymer parts exactly where they would be on the real steel version of an actual Colt M4. The only plastic or nylon components are the stocks and the grips and perhaps some internal parts. I found the adjustable stock and magazine tolerance to be tighter than my King Arms M4A1 I previously reviewed which showed the Bolt B4A1 had a bit higher quality in the workmanship, for the most part the fit and finish was very good!

Realism: As with many Airsoft guns, there is great attention to realism and the Bolt Airsoft BRSS B4A1 Carbine is another great example of an Airsoft Carbine based on the Colt M4 platform. It is an AEG but because of the BRSS (Bolt Recoil Shock System) you get a very nice compromise between a conventional AEG and a GBB (Gas Blow Back Airsoft) gun. In other words, like a standard AEG I get that endless stream of consistent BB's flying down range on target but unlike a true Gas Blow Back Airsoft gun, I don't get that drop off in power and limitation to about 30 usable rounds per magazine . What I do get similar to a GBB is that recoil action that helps make the shooting experience so much more believable! Even the sound from the Bolt B4A1 is much snapper than a standard  AEG and more like a GBB. I also like the fact that the charging handle and forward assist work similarly to a real M4 and also the dust cover cleverly exposes the bolt and internal hop-up for easy adjustment along with the bolt cycling just like a GBB rifle would cycle which is similar to a real steel M4.

Purchased From: The Replica Airguns Store.

Pros:

• Great attention to detail with lots of working parts.

• All Metal upper and lower receiver, lots of metal parts throughout.

• Semi auto & full auto selectable.

• High capacity 300+ round magazine.

• Removable carry handle with Weaver/Picatinny rail underneath.

• Nice high 420 real FPS.

• Extremely accurate for plastic BB's.

• Fully adjustable sights with two position Peep sights.

• 6 position adjustable stock.

• Easy access to internal hop-up system.

• Realistic Blowback Recoil system (BRSS) for a very believable shooting experience!

Cons:

• May not get off as many shots per battery charge as a traditional AEG because of the Bolt Recoil Shock System.

• Does not come with battery or charger but most higher end AEG's also do not.

• Not yet readily available in Canada, maybe we can change that :)

Comments:

The Bolt Airsoft B4A1 Blowback Airsoft Carbine is a great compromise for the avid Airsofter looking for a practical skirmish weapon, but also craving the realistic experience of having blowback with recoil which up until now was really only provided by Gas Blow Back systems. I really like this concept and find it great fun to shoot even if its just for plinking in the yard. The overall quality is very good and you just have to love the M4 platform it's based on. If you're into customizing you can mix and match many external and internal parts with other existing Airsoft mechanical parts and I would imagine real steel accessories. I like mine as is with my addition of a riser and Red Dot and if I every get a chance to get out for a skirmish this will be my weapon of choice for sure!

Buy Airsoft rifles in Canada

Buy Airsoft rifles in the US

I was going to put these two very nice EKOL Dicle 9mm P.A.K. Front Firing Blank Pistols up in the Canada Replica Airguns Store at a preset price but after viewing the condition and the fact that I have had a lot of people asking about blank guns being available, I decided to put them up as silent auction items instead, I kind of wanted to show them off in a video ;)

They are both in "as new" condition, one has never been shot, the other has had a handful of rounds through it, to be honest I can not tell which is which? So basically they are both in "new condition".

Both EKOL Dicle's are being sold with customized Hogue grips but I will include the original grips with them. Both come in the original cases and with the flare adaptors.

To place a bid to purchase one or both of these very nice EKOL Dicle Blank Pistols, you will need to Email Me Here with your highest bid. I will contact the winning bid at the end of the auction and send them a PayPal request for the total amount including $17.99 Shipping/Handling along with their local tax rate. The winner will have till the end of the day to pay or I will move on to the next highest bidder.

This auction will conclude on Friday November 16th Midnight so act fast!

Enjoy my YouTube Video showcasing the EKOL Dicle twins:

This post has nothing to do with guns but it is for a really good cause. I'm growing my mustache during the month of November for the "Movember Cause". I have also donated $100 that goes towards Mens Health focusing mainly on Prostate Cancer and Mens Mental Health.

I encourage everyone to join me on this journey and if you can grow a stache - go for it, please also throw a little love in the form of a small or large donation, I have setup a "Movember" Team where we can all pool our donations together and see how much money we can donate to this very worthwhile cause!

Here is the direct link to my ReplicaAirguns Movember Team Sponsor Page:

I got a few sample products I wanted to quickly share with everyone :) First off Bolt Airsoft, a Taiwanese based company, sent me one of their B4A1 (M4A1 Copy) AEG Airsoft rifles featuring BRSS - (Bolt Recoil Shock System) which has Blowback with simulated recoil.

The Bolt B4A1 is designed after the M4A1 and looks and works like most AEG Airsoft rifles giving you sustained performance and the use of high capacity magazines but Bolt has added their BRSS - (Bolt Recoil Shock System) which gives you the feedback and recoil you would normally only get with a true GBB (Gas Blow Back) Airsoft gun.

I will be doing a full review very shortly so watch for it!

I also received from ASG (Action Sport Games) a few Mock Airsoft Suppressors, all of them are B&T (Brügger & Thomet) derivatives. It was nice that they sent me the version (MP9 QD) that fits perfectly on my ASG/KWA MP9. The other tow are the ROTEX-IIIA and ROTEX-IIIA Compact that fit perfectly on to a standard flash hider and even include one with them.

Check out my Vimeo Preview Video of these Review items from Bolt Airsoft and ASG:

Buy the ASG MP9 A3 in Canada  -   Buy similar Airsoft Gun in the US

And the winner of this years Best Halloween Costume Contest is YouTuber mp032. Congratulation on your great costume and very creative and well done video.

I will be sending him a Replica Airguns Coupon Code worth $100!

Thanks Again to everyone who took the time to submit their Best Halloween Costume Contest video! Check them out if you have not done so yet.

As with most new items I pickup, I like to share them with everyone. I am checking into some more ROHM blank guns, an RG-59 and RG-88, the RG-59 is a lot like the ROHM RG-56 .22 caliber blank revolver I sell in the Canada Replica Airguns Store but in .380 caliber and the one I show off here is a 5 shot two-tone model. Other than that they use the same frame and mechanical parts throughout.

I also received a black/blued ROHM RG-88 which is kind of like a Walther PPK in design, it field strips the same, has a similar safety setup and even has a similar size and look to it although it is definitely not a replica of a Walther PPK. I am impressed with the overall quality of the ROHM blank guns, material used, fit and finish is very good.

Lastly, I acquired a pre-owned Umarex CP99 CO2 Pellet Pistol from a customer of mine. It is in pretty much in new condition and is one of the Umarex guns I was missing in my collection and have been looking to add. The Umarex CP99 is a pretty good replica of the Walther P99 and uses the standard Umarex metal 8 shot rotary magazines and shares the same CO2 grip fed magazine as the CPSport. The CP99 is German made so it's not one of the lower cost Umarex pistols out there but you do get what you pay for ;)

Buy ROHM  Blank Guns in Canada