In this Field Test Shooting Video I perform two main test in the Replica Airguns Sea Can using the KJWorks KP-16 GBB Airsoft Pistol. First a chronograph test to see what the real world velocity is and then I perform an accuracy test to see how accurate the KJWorks KP-16 GBB Airsoft Pistol is at 30 feet from the target. If you’re interested more in specifications and details along with close up video of the KJWorks KP-16 GBB Airsoft Pistol then check out my Table Top Video Review for it where I show you around and do a field strip on camera.
Starting off with my chronograph velocity test. I decided to find out what the differences would be using the included internal short barrel and the extended external barrel since the KJWorks KP-16 GBB Airsoft Pistol does come with both in the box to allow for higher fps and easier import into Canada. The KJWorks KP-16 GBB Airsoft Pistol is rated for 360+ fps using the extended longer barrel so I used that one first to establish a baseline and was able to achieve a 394 fps 4 shot average. Switching up to the shorter internal barrel without the extension, the velocity was reduces as expected and I got an average 3 shoot velocity of 301 fps. So I can safely say that the barrel extension added an additional 90+ fps to the velocity in this case!
Next I placed a brand new paper target 30 feet down range and shot ten 20 gram Airsoft BB’s into it using a seated shooting position with my hands resting on a sand bag up front, this allows for a fairly stable platform to shoot from but is not without some human error to factor in. I also decided to use the barrel extension for this test as the threading on the end of the internal barrel can disrupt airflow causing air turbulence a bit and effect accuracy. I was able to get around a 2 inch grouping with my 10 rounds. The KP-16 GBB Airsoft Pistol shot a bit low and to the left out fo the box, adjusting the hop-up should correct the elevation but in terms of windage there is not sight adjustment other than perhaps playing around with the front removable sight and trying to movie it a bit to the left so as to make it shoot more to the right.
My take on the KJWorks KP-16 GBB Airsoft Pistol is it is a solid Airsoft Shooter with great modern 1911 tactical looks. The white dot sights make it a lot easier for my older eyes to line up on the target which makes this more practical for me. I also like the higher capacity magazine which again makes this a decent side arm for Airsoft wars. If you like the look of the 1911 but want it in a bit more of a modern configuration then the KJWorks KP-16 GBB Airsoft Pistol may just be the way to go!
In this Field Test Shooting Video I perform two main test using the WE 1911 GBB Airsoft Pistol. A chronograph test to see what the real world velocity is and then I perform an accuracy test to see how accurate the WE 1911 GBB Airsoft Pistol is at 30 feet away. If you are interested more in specifications and details along with close up video of the WE 1911 GBB Airsoft Pistol then check out my Table Top Video Review for it where I even do a field strip on camera.
Starting off with my chronograph velocity test. I decided to find out what the differences would be using the internal short barrel and the extended external barrel since the WE 1911 GBB Airsoft Pistol does come with both to allow for higher fps and easier import into Canada. The WE 1911 GBB Airsoft Pistol is rated for 360+ fps using the extended longer barrel so I started with that one first and was able to achieve a 383 fps 4 shot average. Switching to the shorter internal only barrel the velocity was reduces as expected and I got an average 3 shoot velocity of 300 fps. So it is safe to say that the barrel extension added an additional 80+ fps to the velocity!
Next I placed a fresh paper target 30 feet down range and shot 10 rounds into it using a seated shooting position with my hands resting on a sand bag up front, this allows for a fairly stable platform to shoot from but is not without some human factor. I also decided to use the barrel extension for this test as the threading on the end of the internal barrel can disrupt airflow causing turbulence a bit and effect accuracy. I was able to get around a 2.5 inch grouping with my 10 rounds. The WE 1911 GBB Airsoft Pistol shot fairly well on the bullseye up and down with the out of the box hop-up setting but it did shoot just slightly to the left. Since there are no sight adjustments you will have to factor this into your aim point when shooting out at farther ranges, but at around 30 feet you should not have much problem shooting a human sized target or even a pop can.
All in all the WE 1911 GBB Airsoft Pistol perfumed as expected with consistent fps and a nice 10 shot grouping on my paper target. I did find the sights a bit hard to see as my eyes are not what they use to be so black sighted pistols with whit dot sights make it a lot easier for me to line up my target. People with younger eyes will most likely not have this problem but for us a bit older guys, keep this in mind. If you’re looking for a classic 1911 A1 that performs well and looks really nice then the WE 1911 GBB Airsoft Pistol may be just the perfect fit for you!
In this Update Preview Unboxing Video I take a look at 4 newer products that just came across my table and are in our Replica Airguns Online Stores. One is a CO2 Blowback BB Pistol, one is a CO2 .43 Caliber Paintball Pistol and two are GBB Airsoft Pistols, so a rather nice selection for us to take a look at here! I will be following up this Update Preview Unboxing Video with proper Table Top and Field Test Shooting Video to find out all the details and how well they perform.
Type: GBB Airsoft Pistol. Manufacturer: KJWorks Model:KP-16 Materials: Mostly all metal build. Weight: 2.16 pounds (980 grams). Barrel: 4.5 inches, non-rifled. Length: 9.75 inches. Propulsion: Green Gas / Propane (Can also accept a CO2 Magazine) Action: Semi Auto, single action only trigger. Ammunition Type: 6mm Plastic Airsoft BB's. Ammunition Capacity: 26 round full size dropout metal magazine. FPS: 366+ with extended barrel.
Trigger Pull: The trigger pull on the KJWorks KP-16 GBB Airsoft Pistol is exactly what your would expect from a 1911 pistol which is always a good thing as 1911’s are generally short and light which makes fast action shooting super fun and easy! There is virtually no take-up in the trigger, and then a predictable nice and light release. Trigger reset is almost non existent like most 1911’s.
Accuracy: I have not yet made my Field Test Shooting Video for the KJWorks KP-16 GBB Airsoft Pistol but plan to next week so stay posted for that video. I will be testing out both the included extended barrel and internal short barrels to see what the velocity difference will be and then when it comes to accuracy I will test out the KJWorks KP-16 GBB Airsoft Pistol using the extended barrel to exclude the threading on the short barrel interfering with airflow and accuracy.
Build Quality: The KJWorks KP-16 GBB Airsoft Pistol is a really great looking pistol with its tan with black/dark accent finish. You will find it has that KJWorks solid build quality, it is virtually all metal even including the chunky grips being metal. Fit and finish is excellent, I’m not sure if there is a better made Airsoft 1911 out there?
Realism: As is with most Full Blowback Airsoft Pistols they are built to look and act the part of their real steel counterparts and the KJWorks KP-16 GBB Airsoft Pistol checks off all the boxes here! All mechanical parts work just like the real steel version and you can easily field strip the KJWorks KP-16 GBB Airsoft Pistol to swap out the internal barrel and adjust the hop-up. I like the fact that If you are not a fan of the compensator extension then you will be happy to know that KJWorks also includes a standard barrel bushing you can replace it with to shorten up the gun and make it look more traditional to a 1911.
Pros:
Full metal gun with good weight to it.
Heavy Full blowback operation.
Excellent fit and finish as always with KJWorks pistols.
High capacity full size drop out magazine that holds 26 rounds.
Versatile magazine options, also works with CO2 magazines.
Easy to see white dot sights front and back.
All working components like the real steel 1911.
Vented extended barrel compensator looks great but can be removed easily.
Comes with extended barrel for higher velocity and easier import into Canada.
Field strip-able.
Cons:
Sights are not adjustable.
Real steel grips will not fit without some modifications.
Comments: In terms of Tactical 1911’s, I would saye the KJWorks KP-16 GBB Airsoft Pistol is one of my favorites out there. I really like the tan with dark highlights and the way KJWorks decided to match up the metal grips with the compensator with what I would call a dark chrome look to them. The KJWorks KP-16 GBB Airsoft Pistol really does look like it is right out of a video game or movie but if you want to dress it down a bit you can also remove the compensator to make it look more like most other Tactical 1911’s. I guess all that’s need to do now is test the KJWorks KP-16 GBB Airsoft Pistol out in the Replica Airguns Sea Can Range and see how well it performs!
My Table Top Video of the KJWorks KP-16 GBB Airsoft Pistol:
Type: GBB Airsoft Pistol. Manufacturer: WE Airsoft Model:1911 A1 Materials: Mostly all metal build. Weight: 1.7 pounds (760 grams). Barrel: 4.5 inches, non-rifled. Length: 8.5 inches. Propulsion: Green Gas / Propane Action: Semi Auto, single action only trigger. Ammunition Type: 6mm Plastic Airsoft BB's. Ammunition Capacity: 15+1 round full size dropout metal magazine. FPS: 366+ with extended barrel.
Trigger Pull: The trigger pull on the WE 1911 GBB Airsoft Pistol is about what your would expect from a 1911 type pistol which is a good thing since they are generally short and light which makes for easy fast action shooting! There is just a bit of slack in the trigger, perhaps less than a millimeter with a predictable light release. Trigger reset is almost non existent.
Accuracy: I have not yet made my Field Test Shooting Video for the WE 1911 GBB Airsoft Pistol but plan to next week so stay posted for it. I will be testing out both the extended barrel and internal short barrel to see what the velocity difference will be and then when it comes to accuracy I will test out the WE 1911 GBB Airsoft Pistol using the extended barrel to exclude the threading on the short barrel interfering with accuracy.
Build Quality: The WE 1911 GBB Airsoft Pistol is a really gorgeous looking pistol in the stainless finish. You will find it has an overall solid build quality, it is virtually all metal with only the grips and some internal parts like the gas chamber and nozzle being plastic. There is almost zero slide wiggle and all the mechanical parts work and engage nicely. The only thing I noticed was that the ejection port near the front could have been finished a little bit better as there seemed to be some slight ridges in the metal there.
Realism: As is with most Full Blowback Airsoft Pistols they are built to look and act the part of their real steel counterparts and the WE 1911 GBB Airsoft Pistol is again no exception! All mechanical parts work as intended and you can easily field strip the WE 1911 GBB Airsoft Pistol to swap out the internal barrel and adjust the hop-up. I like the fact that WE Airsoft color matched the magazine rather than simply shipping it with the black magazine as I have found some other companies do.
Pros:
All metal pistol with decent weight to it.
Crisp Firm full blowback operation.
Very good fit and finish.
No marking on the metal parts at all, some may like this.
Color matched stainless magazine.
Gun will accept real 1911 grips 99% sure of this :)
All controls work just like there real steel version, safety, slide catch release, safety and grip safety.
Should have good fps with barrel extension, enough for import into Canada.
Very believable working replica of the real steel Colt 1911 A1 Pistol.
Fully field strip-able.
Comes with extension barrel and replaceable inner barrel if not going to use extension.
Cons:
No markings or licensing on the gun if that is important to you?
Perhaps a bit lighter than a real steel 1911 at 1.7 pounds.
Magazine only holds 15 rounds but the real steel 1911 only held 7 rounds.
Comments: As I have mentioned in many of my other videos, I am a huge 1911 fan and even go so far as to prefer the standard Government issue over all others as it is the most basic and closest to its original version. There are a ton of BB and Airsoft Blowback 1911’s available now so it is really hard to pick which one to get understandably. If you are a WE fan then this choice should be fairly easy, if you are not sure about WE then all I can say is this is one of the nicer 1911 A1’s and if you want a lighter weight gun over a heavier gun then that may also play a roll in your buying decision. I can’t comment just yet on performance but I will know shortly so stay posted. If it performs well then there is no reason not pick yourself up on of these WE 1911 GBB Airsoft Pistols!
My Table Top Video of the WE 1911 GBB Airsoft Pistol:
In this Field Test Shooting Video I give the Cybergun Licensed L6 .50AE Desert Eagle GBB Airsoft Pistol my usual run though and test it out using my Chronograph to see what the average 5 shot Velocity is using .20 gram plastic Airsoft BB’s. I then placed 10 rounds at a paper target setup 30 feet down range using a seated shooting position with my hands rested on a sand bag up front for stability. If you want information on specifications and details along with some close up video of the Cybergun Licensed L6 .50AE Desert Eagle GBB Airsoft Pistolthen watch my Table Top Video for it here.
Starting off with my Chronograph test, the Cybergun Licensed L6 .50AE Desert Eagle GBB Airsoft Pistol was able to get a 6 shot average of 351 fps with the fasters round hitting 359 fps and the slowest Airsoft BB recording 346 fps. The indoor temperature was around 20 degrees Celsius which is close to 70 degree Fahrenheit for reference so with warmer temperatures I would expect velocities up to the claimed 360+ fps.
Moving on to the accuracy portion of my Field Test Test for the Cybergun Licensed L6 .50AE Desert Eagle GBB Airsoft Pistol, I slowly and carefully placed 10 rounds into my fresh paper target and was able to get a nice 2 inch group perhaps even verging on 1.5 inches if I remove one outlier. I was shooting rather low at first so I raised my aim point up a bit, since the sights are not adjustable you might want to adjust your hopup a bit to spin/arc the Airsoft BB up just a bit.
Overall the Cybergun Licensed L6 .50AE Desert Eagle GBB Airsoft Pistol is an awesome Airsoft gun to shoot, it really has a lot of blowback action you can feel in your hands probably because of its large overall size, you will need some sizable hands to shoot this Airsoft Pistol as the grips are large and wide just like the real steel version. Performance wise the Cybergun Licensed L6 .50AE Desert Eagle GBB Airsoft Pistol performed as expected and maybe even better than I expected hitting really close to the claimed fps and shooting a nice tight 10 shot grouping for me. If you are a Desert Eagle fan and like the gold bling then this may just be the product for you.
Trigger Pull: The trigger pull on the Cybergun Licensed L6 .50AE Desert Eagle GBB Airsoft Pistol is single action only which means you will need to rack the slide to not only draw the hammer back but to also chamber the first round. After that the blowback action will do this for you until you are out of ammo and then the slide will lock back. The trigger itself is really nice, it’s light, short and has a crisp release perfect for fast action shooting.
Accuracy: At this point I have not made my Field Test Shooting portion of my review for the Cybergun Licensed L6 .50AE Desert Eagle GBB Airsoft Pistol and I really don’t know what to expect? Cybergun claims an fps of 368 using green gas or propane but this may be on the high side since green gas generally produces less velocity than CO2. In terms of accuracy, again I have no idea since I have not reviewed this version of Desert Eagle before. So stay posted till next week when I make the Field Test Shooting Review for it.
Build Quality: Overall the all metal build quality of the Cybergun Licensed L6 .50AE Desert Eagle GBB Airsoft Pistol is good which I would hope to be the case for a higher priced Airsoft Pistol like this. I did however notice under the slide there was a bit of a rough area that I feel could have been sanded or polished out a bit better. Other than that this gun looks amazing and the fact that both the slide and receiver are both metal gives this Airsoft gun good weight and feel.
Realism: The Cybergun Licensed L6 .50AE Desert Eagle GBB Airsoft Pistol is an excellent Replica Airsoft version of the real steel L6 .50AE Desert Eagle including the top and bottom rails and the ported front barrel. It also has full blowback action and you can fully field strip it. Combine that with an all metal build and it doesn't get any more realistic than that.
Pros:
Full metal build, close to true weight of real steel version.
Nice gold or silver Electroplated finish.
Realistic full blowback action.
Fully Licensed via Cybergun.
Rails on top and bottom for adding accessories.
Nice light and short single action trigger.
Injection molded polymer grip panels with Desert Eagle markings.
Realistic field strippable.
Full size drop out metal magazine.
Adjustable Hop-up to adjust elevation and accuracy at range.
Cons:
Comes with red/orange tip installed.
Price is on the higher side.
This version is not full auto.
Comments: Going off just the looks and feel for the Cybergun Licensed L6 .50AE Desert Eagle GBB Airsoft Pistol I can say it is for sure one of the nicest Desert Eagles I have reviewed to date. I’m not generally a fan of gold guns but I think gold really suits the Desert Eagle since this iconic pistol is known for being over the top. It’s also full metal as compared to the KWC versions so that’s a big plus. I guess it will come down to how well it performs during my Field Test Shooting Video in terms of power and accuracy. If it doesn't let me down here, it may just be worth the nearly $400 piece tag!
My Table Top Video of the Cybergun Licensed L6 .50AE Desert Eagle GBB Airsoft Pistol:
Type: BB Pistol. Manufacturer: Umarex. Model: M29. Materials: Metal & plastic. Weight: 2.5 pounds (1135 grams). Barrel Length: 8.375 inches (Smooth bore). Total Length: 12.13 inches. Propulsion: 12 gram CO2 cartridge. Action: Revolver, single and double action. Ammunition Type: 4.5mm steel BB's (Also available in 6mm Airsoft). Ammunition Capacity: 6 rounds. FPS: 420fps claimed.
Trigger Pull: The trigger pull on the Umarex S&W M29 8 Inch Barrel Shell Loading CO2 BB Revolver is light in single action but not too light, there is virtually no take up and the release is predictable. In double action the trigger pull is heavier as the cylinder and hammer are both actuated manually by the trigger but even so the pull is not what I would call heavy for a double action revolver. The double action trigger pull is nice and even and will not tire out your finger too much firing all six rounds quickly.
Accuracy: At this point i have not made my Field Test Shooting portion of my review for the Umarex S&W M29 8 Inch Barrel Shell Loading CO2 BB Revolver but I expect to get close to the 420 fps claimed velocity and I also expect to shoot around a 1 to 2 inch grouping based on my past experienced with similar Shell Loading BB Revolvers. I may even pull of a 1/5 inch group if I am on my game and so is the gun… We will have to all wait till next week when I record the shooting portion of my review for the Umarex S&W M29 8 Inch Barrel Shell Loading CO2 BB Revolver.
Build Quality: Overall the all metal build quality of the Umarex S&W M29 8 Inch Barrel Shell Loading CO2 BB Revolver is very good. The black chrome finish looks really nice but does show every finger print and any grease from your hands. The imitation wood grips look just like real wood and with only the exception of a small scratch or crack in the front plastic red sight, the Umarex S&W M29 8 Inch Barrel Shell Loading CO2 BB Revolver was flawless.
Realism: The Umarex S&W M29 8 Inch Barrel Shell Loading CO2 BB Revolver is the same revolver used in one of the Dirty Hariy Movies and really looks exactly the same. As with all the shell loading BB/pellet/Airsoft Revolvers, they look and perform exactly like the real steel versions other than recoil of course. The only give away for the Umarex S&W M29 8 Inch Barrel Shell Loading CO2 BB Revolver would be the diameter of the shells as Umarex decided to repurpose the 38/357 shells used in their other smaller caliber shell loading revolvers. It would have been nice to have a larger 44/45 caliber sized shell that they could use in both the Colt 45 Single Action Army Revolvers and this 44 Magnum version of the Smith and Wesson M29 Revolver. The barrel opening is closer to that of a 44 Magnum so they did get that part right.
Pros:
Classic iconic 44 magnum movie revolver.
Mostly all metal build.
Good overall weight, it’s big so expected to weigh a fair amount.
Lots of detail, well made, fit and finish is very good.
Fully S&W Licensed via Umarex.
Love the black chrome look but prone to finger prints.
Simulated wood grips look real enough.
Should have good overall power, accuracy and shots per CO2 (claimed around 80 per CO2).
Adjustable rear sight for windage/elevation with red dot front sight.
CO2 Allen key built into grip.
Recessed barrel true to 44 magnum opening size.
Nice Trigger pull in both single and double action.
Cons:
Shells are closer to 357 not 44 magnum in size.
Don’t like the white writing on the right side.
Black chrome finish shows lots of finger prints and grease.
Comments:
I really like that Umarex decided to give us this more classic Revolver to add to our collection of Airgun Revolvers! I was a big fan of the Dirty Harry Movies so this gun is for sure going to be part of my Airgun collection and even if you are not a fan, you should probably be a fan of the Smith and Wesson M29 which was considered to be one of the most powerful revolvers back in its day. Right now you can get it in 4.5mm Steel BB and 6mm Plastic Airsoft but hopefully there is a .177 caliber Pellet version on its way at some point.
My Table Top Video of the Umarex S&W M29 8 Inch Barrel Shell Loading CO2 BB Revolver:
I have a nice Airgun Pistol Update Unboxing video to checkout where I take a look at 5 Airguns four of which are Gas Blowback Airsoft Pistols and one is a CO2 BB Revolver. I don’t go into a lot of details here on each Airgun as this is mainly just a preview video to let everyone know we have these products in our Online Replica Airgun Stores and give a you a quick look at them. I will be following up with individual Table Top and Field Test Videos where I go into more details and also show you how each gun performs in the Replica Airguns Indoor Sea Can Shooting Range.
Trigger Pull: The trigger pull on the Bear X Desire XL Crossbow is medium to heavy, it is a single action only trigger as you need ot cock the bow in order for the trigger to be engaged. The safety is also engaged when you cock the bow requiring you to take the Bear X Desire XL Crossbow off safe before shooting as an added layer of safety.
Accuracy: I have not made my Field Test Shooting Video for the Bear X Desire XL Crossbow and so I have not sea what to expect for it. I have watched a few videos of other people reviewing it and it looks to perform fairly well but until I get a few bolts in a target downrange I can not say for certain the accuracy of the Bear X Desire XL Crossbow. I will have to figure out some sort of a usable back stop in order to make this Field Test Shooting Video but have some ideas already on material to use as my back stop. FPS is claimed ot be around 175 and I will be doing my best to Chronograph the Bear X Desire XL Crossbow so we can confirm that rating for ourselves…
Build Quality: The Bear X Desire XL Crossbow is actually made pretty decently, yes it is mostly plastic and light weight but feels sturdy enough to hold, the only real metal I can confirm is the cocking rail, mostly everything else other than the nuts and bolts that hold it together are some sort of plastic, the bow itself may be a composite material but I am not sure what exactly it is?
Realism: The Bear X Desire XL Crossbow is not a Replica as is what I usually review here on the channel. But I think their is a crossover in terms of interest for a product like this with people that are also interested in airguns. I know I like the Bear X Desire XL Crossbow and can see a place for it in my collection even if it’s not a replica product.
Pros:
Fairly inexpensive.
Super light weight.
Can shoot in a variety of situations.
Easy to draw the bow.
Safety is automatically engaged.
Picatinny rail already has iron fully adjustable rear sight but can mount a red dot if you like.
Fiber optic front sight.
3 bolts included.
175 fps (not sure of the ft/lbs)?
Comes with fore grip.
3 portion adjustable rear but stock.
Cons:
Will need a good backstop or will lose or damage a lots of bolts.
Takes a little bit of time to set it up but not too hard if you follow the instructions.
Comments:
The Bear X Desire XL Crossbow is an interesting product that once purchased and if you manage to not lose the bolts will cost virtually nothing to shoot since you can reuse the bolts all day long given you shoot them on target and that target does not damage the bolts. It may not offer the rapid fire action shooting of a replica semi auto CO2 Pistol but still challenges the shooter in terms of getting the best possible accuracy out of it and at the end of the day trigger time is trigger time! If you are looking for something a bit different than your CO2 Air Gun then maybe the Bear X Desire XL Crossbow will fill that requirement.
In this Field Test Shooting Video I put some .20 gram Airsoft BB’s through the Action Army AAP-01 GBB Airsoft Pistol to see what the actual velocity is compared to the claimed fps. I also put 10 rounds into a paper target setup 30 feet downrange to find out just how accurate and what kind of grouping I can get from this Gas Blowback Airsoft pistol and also do a full mag dump! If you have not already watched my Table Top Review for the Action Army AAP-01 GBB Airsoft Pistol then make sure to watch if for more specifications and details along with some nice close up video.
For my Chronograph test I placed 5 rounds through my Chrony using .20 gram plastic Airsoft BB’s and was able to average 314 fps with the short barrel and 385 fps with the longer barrel extension added. I was surprised with the addition 70 fps just by adding an extra 4 inches or so to the barrel.
For the accuracy portion of my Field test Shooting Video for the Action Army AAP-01 GBB Airsoft Pistol, I ended up first placing 10 rounds into a fresh paper target setup 30 feet down range. I was using my standard seated and rested shooting position which does offer a fairly stable shooting platform but not without some degree of human interaction. I was a little bit disappointed in the grouping I got as it was one of the larger groupings I have gotten for a test like this spreading out to at least 5-6 inches, still perfectly fine shooting at human target 30-40 feet away. I then uploaded up a full magazine with BB’s and gas and did a mag dump on the same target. As expected there was a lot fo gas and a lot ammo spraying everywhere but the Action Army AAP-01 GBB Airsoft Pistol did make it through the full 22 rounds and get at least some of them on the target.
The Action Army AAP-01 GBB Airsoft Pistol may not be the most accurate GBB Airsoft Pistol out of the box but does offer both semi and full auto and at the end of the day when using this Airsoft Pistol in an actual game situation the accuracy will be not as important since your target will generally be a human torso which is much larger than the 5-6 inch grouping I got. I’m not sure how useful the full auto feature really is in a real world situation but it sure is fun and maybe if you pair up a higher capacity G-series magazine this compact full auto pistol could work as a nice min machine gun!
In this Field Test Shooting Video I put some lead pellets through the Umarex Ruger Mark IV Break Barrel .177 Cal Pellet Pistol to see what the real world velocity is compared to the claimed fps. I also put 7 rounds into a paper target setup 30 feet downrange to find out just how accurate and what kind of grouping I can get from this compact spring piston replica air pistol! If you have not already watched my Table Top Review for the Umarex Ruger Mark IV Break Barrel .177 Cal Pellet Pistol then make sure to watch if for more specifications and details along with some nice close up video.
For my Chronograph test I placed 5 rounds through my Chrony using 8.18 grain Sig Sauer Match Precision Wadcutter Lead Pellets and was able to average 312 fps so just shy of the claimed 320 fps but there are lighter lead pellets out there and even lighter alloy pellets so higher fps can be achieved with this Air Pistol if you plan on using lighter pellets.
For the accuracy portion of my Field test Shooting Video for the Umarex Ruger Mark IV Break Barrel .177 Cal Pellet Pistol, I ended up placing 7 rounds into a fresh paper target setup 30 feet down range. I was using my standard seated and rested shooting position which does offer a fairly stable shooting platform but not without some degree of human interaction. I was a little bit disappointed in the 2 inch grouping I got, I was expecting closer to a 1 inch group but I would have had to have been on my game and maybe today I was not. Pellet choice can also effect accuracy for sure and so maybe a different pellet would have performed better in this test. Most of the variable was up and down not left to right with only about an inch side to side.
All in all the Umarex Ruger Mark IV Break Barrel .177 Cal Pellet Pistol did a good job hitting velocities as claimed and producing a decent grouping that I feel I could have improved upon once I got use to the lighter firmer trigger than I would like to see on a Ruger Mark IV Replica to match the real steal one more closely. Shot placement out of the box was close to the bullseye, it just needed to move up a bit and a tad to the right but once the sights are adjustable for windage and elevation this is easily fixed with a few turns of the sighting screws. If you are a Ruger 22LR owner than I would suggest you buy one of these Umarex Ruger Mark IV Break Barrel .177 Cal Pellet Pistols and shoot for even less cost per shot and in more locations since this Air Pistol is super quiet and most makeshift backstops will work with it just fine.
Type: Airsoft Pistol. Distributer: Action Army. Model:Action Army AAP-01. Materials: Metal and polymer build. Weight: 1.43 pounds (648 grams). Barrel: 5/9.25 inches. Total Length: 9 inches. Propulsion: Gas Blowback. Action: SAO. Ammunition Type: .6mm Airsoft BB’s Ammunition Capacity: 22 rounds. FPS: 360.
Trigger Pull: The trigger pull on the Action Army AAP-01 GBB Airsoft Pistol is fairly light, it is a single action only trigger meaning you will need to pull the bolt back to engage the trigger and load an Airsoft BB into the breach. I noticed there is about a 1/4 inch of take-up with a firm breakpoint and easy trigger release. You will also notice there is a trigger safety on the trigger but it does not get in the way at all.
Accuracy: I have not had the chance to really test out this Airsoft Pistol but will be doing so next week when I make my Field Test Shooting Video for the Action Army AAP-01 GBB Airsoft Pistol. I did load up a magazine with propane and do a mag dump in full auto and managed to get though it all but I did pretty much use up all the Gas shooting in full auto. I am sure when in semi auto the gas will go a lot further. I look forward to seeing how it performs in the Filed test in term of accuracy and velocity.
Build Quality: The Action Army AAP-01 GBB Airsoft Pistolhas a good overall build quality and fit and finish. There is a lot of plastic on the outside but good use of metal internally in the bolt, barrel and magazine giving it decent weight but not making it too heavy.
Realism: The Action Army AAP-01 GBB Airsoft Pistol is not an actual Replica specifically of any one particular real steel gun in production, that said it does resemble the Ruger series of 22LR pistols in design and how the bolt functions. You will finds lots of working parts that function as you would expect to them if this was a powder burner. Like the bolt, slide catch, magazine release, safety, trigger safety and full size drop put metal magazine. You can even field strip this gun easily.
Pros:
Full Blowback operation.
Full size dropout G-series metal magazine .
Fiber optic front and back sights.
Can mount rails on top and bottom (not included).
Comes with short and long barrels.
Has a 14mm threaded barrel which can be used to add a mock suppressor to hide the barrel extension.
Working trigger safety and added cross bolt safety.
Mostly everything is ambidextrous.
Can be used in semi auto or full auto mode with the flick of a switch hidden under the bolt.
Overall a nice looking custom Airsoft Pistol!
Cons:
Rear sight not adjustable.
May be hard to find a holster for it.
Seems to eat a lot of gas especially in full auto mode.
Comments: What I really like about the Action Army AAP-01 GBB Airsoft Pistol is that it is rather unique looking, it looks nothing like a Glock, or 1911, or a Beretta or Sig so if you want something that stands out from the crowd then this may be it. I also like the ability to shoot in semi auto or full auto with the click of a switch and since it uses standard G-series magazines you should be able to easily find higher capacity extended mags that hold more gas and more Airsoft BB’s which you will for sure need if you plan to be shooting this one in full auto often.
My Vimeo Table Top Review Videos for the Action Army AAP-01 GBB Airsoft Pistol:
Type: Pellet Pistol. Distributer:Umarex. Model:Ruger Mark IV. Materials: Metal and polymer build. Weight: 1.56 pounds (708 grams). Barrel: 5.3 inches (135mm). Total Length: 11 inches (279mm). Propulsion: Spring Piston. Action: SAO Break Barrel. Ammunition Type: .177 caliber pellets. Ammunition Capacity: 1 round. FPS: 320+.
Trigger Pull: The trigger pull on the Ruger Mark IV Break Barrel .177 Cal Pellet Pistol is not too bad, I feel it is a around 6-7 pounds or so without measuring. In comparison to a real steel 22LR semi auto SAO trigger pistol, the trigger is much heavier but most of these 22LR pistols of this nature have what I would consider to be near perfect triggers. Over time once you get use to the pressure and release point accuracy with this pistol it is for sure possible.
Accuracy: I have not had the chance to really test fire this pellet pistol but will be doing so next week when I make my Field Test Shooting Video for the Umarex Ruger Mark IV Break Barrel .177 Cal Pellet Pistol. If it is anything like the Umarex Buck Mark URX which I imagine it will be, then I am expecting to get some good accuracy as the URX was able to get a nice under 1 inch shot grouping when I tested it a few years back. Velocity I am expecting to be up and over 300 fps even using lead pellets, I am hoping it will be in the mid 300’s
Build Quality: The Umarex Ruger Mark IV Break Barrel .177 Cal Pellet Pistolis a low cost target plinker that also doubles as a licensed Replica for that coolness factor so you won’t get an all metal super top quality build here. That said metal and plastics are well used and for sure details in the fit and finish have been improved over the Buck Mark URX version where I found the barrel felt a bit sloppy and the trigger was plastic. The Umarex Ruger Mark IV Break Barrel .177 Cal Pellet Pistol has a much tighter barrel fit when closed and the trigger is now metal! Maybe Umarex watched my video back in the day and took some notes?
Realism: The Umarex Ruger Mark IV Break Barrel .177 Cal Pellet Pistol most resembles the Mark IV Hunter edition and is pretty much bang on in terms of being a replica other than the tell tail hinge just under the barrel required for a spring piston design, there really is no way to get around this so I’m not going to criticize this minor difference. The real steel version is almost 3 pounds and so the pellet shooting version is a bit under weight so it would have been to have had more metal perhaps in the barrel and lower frame. Again since the pellet shooting version is a springer you will not have any working bolts or slide catches or a built in magazine.
Pros:
It's a decent Ruger Mark IV Replica!
Feels well built overall.
Expect it to have really good accuracy like the Umarex Browning Buck Mark URX since they share similar mechanical design.
Barrel locks into place much better than the Umarex Browning Buck Mark URX did.
Fully adjustable rear sight with fiber optic front sight.
Auto locking safety, just don’t forget to unlock before each shot
Actual metal trigger in this version.
Nice and compact, not too heavy.
Full Ruger licensed via Umarex.
Fairly low price tag.
Cons:
No built in rail for a sight system like the Umarex Browning Buck Mark URX but this is tru for the Hunter version.
Trigger pull could be lighter to match the real steel version.
A bit more metal would have been nice to get the weigth up closer to the real steel version.
Comments: I remember the Umarex Buck Mark URX being a super fun pellet pistol to shoot even though it is only a single shot airgun. Sometimes just getting back to the basics and taking your time to really place your shots and see how accurate you can be is more fun than spraying BB’s and pellets rapid fire and hoping you hit something. The Umarex Ruger Mark IV Break Barrel .177 Cal Pellet Pistol is inexpensive to buy and inexpensive to shoot, no CO2, just a tin of your favorite pellets and you will get hours of fun for it while honing your shooting skills. And at the end of the day the Umarex Ruger Mark IV Break Barrel .177 Cal Pellet Pistol is not a bad Replica Airgun if you are a collector of shot guns.
My Vimeo Table Top Review Videos for the Umarex Ruger Mark IV Break Barrel .177 Cal Pellet Pistol:
In this Preview Unboxing Vimeo Video I take a look at five very different products! A Spring Piston .177 Caliber Pellet Pistol, an Airsoft GBB Pistol, a Compact Crossbow, a full auto CO2 Blowback BB Pistol and a PPC .22 Caliber Pellet Rifle.
First up is the Umarex Ruger Mark IV Spring Piston Pellet Pistol which is a single shot replica pellet pistol that shoots .177 caliber pellets at up to 320 fps using a spring piston break barrel system. The Umarex Ruger Mark IV Spring Piston Pellet Pistol is a target plinker with fully adjustable fiber optic sights and should be a lot of fun to shoot!
Next I take a look at a Gas Blowback Airsoft Pistol from Action Army that closely resembles the Ruger Mark IV pistol with perhaps a more compact look. The Action Army AAP-01 GBB Airsoft Pistol is full blowback a full size drop out magazine and fiber optic sights. It also come with a threaded barrel and barrel extension for adding a longer barrel and much suppressor.
Next on my list of new items is the Bear X Desire XL Crossbow which is a 2.2 pound compact bolt shooting crossbow that sports a rail system with included adjustable iron sights that also allow for a red dot if you want to really customize it. The Bear X Desire XL Crossbow has a 60 pound draw and shoots arrows/bolts at up to 175 fps.
Another AR BB Rifle/Pistol from Crosman is the Crosman A4-P Full Auto CO2 BB Pistol which is essentially a pistol version of the AR Platform. If you like the Crosman DPMS SBR, R1, PDW then you will probably also like the Crosman AP-4. Like the others it uses dual CO2’s and shoots 4.5mm Steel BB;s in semi or full auto at 1400 rounds per minute until the 25 round magazine is empty.
Last included in this preview video is the Air Venturi Avenger Regulated PCP Pellet Rifle. I’m a bit uncertain about this one as I am pretty sure it is the non detuned PAL version that requires a firearms license here in Canada as it shoots at full velocity (.22 caliber pellet at 950 fps). If that’s the case then it will not be available in our Canada Replica Airguns Store but may be available in the US Replica Airguns Store. If it is the detuned version or a detuned version becomes available in Canada then I imagine we will at some point have it in the Canada replica Airguns Store. That said the Air Venturi Avenger Regulated PCP Pellet Rifle uses compressed air and shoots either .177. .22 or .25 caliber pellets using a latch system and rotary magazine.
In this Replica Airguns Field Test Shooting Video I test out the Cybergun Kalashnikov AK47 Tactical Folding Stock AEG Airsoft Rifle to see what the actual velocity is and what kind of accuracy we can expect shooting 30 feet down range into a paper target, I shoot in both semi auto (10 rounds) and then Full auto (A bunch of rounds) to see how this will asl effect the accuracy.
Make sure to also watch my Table Top Video Review for the Cybergun Kalashnikov AK47 Tactical Folding Stock AEG Airsoft to find out more about it’s specifications and features along with some nice close up video of it.
Starting off with the velocity portion of this Field Test Shooting Video, I placed 6 rounds through my Chronograph using .20 gram Airsoft BB’s and averaged 384 fps. The slowest shot was 380 fps while the fastest shot was 390, so only a 10 fps spread! This is a nice velocity as it’s not too hot for indoor skirmishes or too slow for further out shooting outside.
Next I setup a fresh paper target 30 feet down range and proceeded to test out the Cybergun Kalashnikov AK47 Tactical Folding Stock AEG Airsoft Rifle in both semi auto and full auto to see what kind of grouping I could expect. I did not sight in the Cybergun Kalashnikov AK47 Tactical Folding Stock AEG Airsoft Rifle as I like to see how they perform right out of the box. I did notice I was shooting a little bit high and just slightly to the left. Elevation adjustment can be easily adjusted using either the front post sight, the rear notch sight or even a little bit with hop-up so this is not a problem. There is however no way I could see to adjust windage so any corrections you may need ot make left to right you will have to do using your aim point. That said I was able to get around a 1.5 inch grouping with 10 rounds in semi auto mode.
Switching things up to Full auto so fun mode I proceeded to place a whole bunch of rounds into the target, I will estimate around 75 or so and the grouping only spread out to about 2 inches so semi or full auto you will get great accuracy with the Cybergun Kalashnikov AK47 Tactical Folding Stock AEG Airsoft Rifle! The rate of fire using an 8.4 volt battery is not super fast but the cycle rate on a real steel AK47 is also not super fast but if you want to speed it up and also have a more responsive trigger then I would suggest using a higher voltage LiPo battery.
I was very impressed overall with the Cybergun Kalashnikov AK47 Tactical Folding Stock AEG Airsoft Rifle as it is a relatively inexpensive Airsoft Rifle with lots of included bonuses like two magazines, a battery and charger. Even with the low price and bundled add ons it performed really well for me. SO if you are looking for an AK type Airsoft Rifle I would suggest you take a look at the Cybergun Kalashnikov AK47 Tactical Folding Stock AEG Airsoft Rifle as an option for sure!
Type: Airsoft AEG. Distributer:Cybergun Model:Kalashnikov AK47 Tactical 60th Anniversary. Materials: Metal and polymer build. Weight: 6.82 pounds (3100 grams). Barrel: 457mm (18 inches) Total Length: 709-950mm (27.9-37.4 inches). Propulsion: AEG. Action: Semi, full auto. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: 550 rounds. FPS: 400.
Trigger Pull: The trigger pull on the Cybergun Kalashnikov AK47 Tactical Folding Stock AEG Airsoft Rifle is what you will find on most electric switch controlled AEG Airsoft Guns. It has a short to mid length very light take-up with a light release which generally has a bit of a delay as the motor pulls the spring back and release the piston. This delay is shorter with higher voltage batteries as the motor will run quicker allowing for a shorter delay and also a higher rate of fire in full auto mode.
Accuracy: I have not performed my Field Test Shooting Video for the Cybergun Kalashnikov AK47 Tactical Folding Stock AEG Airsoft Rifle but plan to get to that video this week. I really have no idea what to expect at this point since i have not even loaded up a magazine so we will find out together when I get to my Indoor Field Test Shooting video in a couple of days.
Build Quality: Overall the Cybergun Kalashnikov AK47 Tactical Folding Stock AEG Airsoft Rifle seems fairly well built. You will find metal parts in the barrel, front and back sights, receiver, charging bolt, bolt cover, rings, trigger and trigger guard. The plastic components would be the folding stock, magazine, RIS hand-guard, fore-grip and pistol grip. Fit and finish seem good and the overall weight is heavy but not too heavy. Internally you get a metal gear box with metal gears so you should expect to have a reliable and long lasting shooting experience with this Airsoft Rifle.
Realism: The Cybergun Kalashnikov AK47 Tactical Folding Stock AEG Airsoft Rifle for sure looks the part of a more modern tactical AK47 with the majority of the mechanical parts functioning like a real steel version as in the charging bolt, bolt cover, sector switch, foldable rear stock and of course the magazine release.
Pros:
Mostly metal construction with good overall weight and feel.
Lots of rail attachment options on RIS rail hand-guard.
Adjustable sights, smaller increments on front, easy quick adjustment for elevation at distance on the back.
Comes with a folding fore-grip.
Rear folding stock helps to shorten up the rifle in transport or for storage.
Comes with two high capacity magazines.
Comes with a battery and charger.
Comes with sling mounts and a basic sling.
Super easy access to change out the battery.
Easy access to hop-up via charging bolt.
FPS should be nice and high, good for long or mid range shooting.
Cybergun Kalashnikov licensed, also 60th Anniversary edition.
Orange tip should be easy enough to remove.
Price point is fairly good for all that you get.
Cons:
No simulated blowback action.
Sights are only adjustable for elevation.
Magazines are plastic, feel a bit cheap and light.
Comments: The Cybergun Kalashnikov AK47 Tactical Folding Stock AEG Airsoft Rifle is what I would consider a great value AEG Airsoft Rifle and there are not as many AK style Airsoft Rifles to choose from as there are AR’s so it’s nice to see this one in the lineup. You do get a lot for what you are paying, lots of metal parts externally and internally with a hefty almost 7 pound weight to it. I also like that you get everything you need to get going other than the Airsoft BB’s, so you get the battery and charger along with two 500+ magazines, they even add in a cheap sling just in case you want to throw it over your shoulder!
My Vimeo Table Top Review Videos for the Cybergun Kalashnikov AK47 Tactical Folding Stock AEG Airsoft Rifle:
Back in 2017 I made “Which Beretta Airgun is the Best” Video and showed off some 4.5mm Steel BB and .177 Caliber Pellet versions of my favorite Beretta 92 - M9 style Air Pistols. There have been some changes since then most noticeably the addition to Airsoft versions so I thought I would update this video with more current Beretta Airguns along with of course some of the same ones form my last video.
Because I show off 4.5mm Steel BB, .177 Caliber Pellet and 6mm Plastic Airsoft versions I decided to pick my favorites form each category. Watch my Vimeo Review Comparison Video so checkout these Air Pistols and see which ones are my favorites…
.177 Caliber Pellet Beretta 92 -M9 CO2 Air Pistols
Took me a while to get to this Field Test Shooting Video for the ASG CZ Scorpion EVO 3 A1 6mm AEG Airsoft Gun but glad I took a look at it even if it is over 6 years already on the market. As per usual I test out the velocity shooting several ordains through my Chronograph to see what the real world fps is, I then follow this up with an accuracy test shooting 10 rounds on a paper target setup 30 feet downrange to see how tight of a grouping I can get. Also make sure to watch my Table Top Video for the ASG CZ Scorpion EVO 3 A1 6mm AEG Airsoft Gun for information on the specifications and features along with some nice close up video.
Starting with my Velocity Test I placed 6 rounds through my Chronograph using .20 gram Airsoft BB’s clocking in an average of 421 fps. I was very impressed with the consistency of the velocity with the lowest shot being 420 fps and the fastest shot being 422 fps only 2 fps apart! You can change out the spring super easy on the ASG CZ Scorpion EVO 3 A1 6mm AEG Airsoft Gun but I feel that the fps out fo the box would be good for most Airsoft games indoor and outdoor.
I then places a brand new paper target 30 feet downrange and proceeded to shoot 10 rounds at it in semi auto using a seated shooting position rested on a sand bag up front. I was able to get very close to a 1 inch grouping just a tad over an inch. I did not sight in the gun so I was not surprised I was shooting rather low and just a hair to the left, this could be equally corrected by adjusting the rear sight for windage and elevation. I could also play around with the hop-up effecting elevation at different ranges. I then proceeded to shoot take some more shot in both 3 round burst adn full auto modes and as expected the groupings did spread out a bit but not a lot.
I was super impressed with eh performance of the ASG CZ Scorpion EVO 3 A1 6mm AEG Airsoft Gun, I don’t think I have seen velocity consistency this good in any other AEG Airsoft gun I have tested so far. Accuracy was also on point even using lighter plastic .20 gram Airsoft BB’s. My only real grip with the ASG CZ Scorpion EVO 3 A1 6mm AEG Airsoft Gun is the limited battery choice since the internal storage ares is very constricted. Other than that this Airsfot Gun is a winner and worth taking a look at if you can get your hands on one.
Type: Airsoft AEG. Distributer:ASG. Model: CZ Scorpion EVO 3 A1. Materials: Metal and polymer build. Weight: 5.3 pounds (2400 grams). Barrel: 208mm (8.2 inches) Total Length: 425-623mm (16.7-24.5 inches). Propulsion: AEG. Action: Semi, burst, full auto. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: 75 rounds. FPS: 395.
Trigger Pull: The trigger pull on the ASG CZ Scorpion EVO 3 A1 6mm AEG Airsoft Gun is essentially just an on off electric switch controlled by the ECU. There is very little trigger resistance and the take up is very short allowing for quick semi auto shooting but if you like you can easily select three round burst or full auto shooting for more intense situations.
Accuracy: I have not performed my Field Test Shooting Video for the ASG CZ Scorpion EVO 3 A1 6mm AEG Airsoft Gun but plan to get to that video next week. I really have no idea what to expect at this point since i have not even loaded up a magazine and taken it for a spin yet. I am sure I will not be dissapoitned as this is a very high quality Airsoft Gun with great internals.
Build Quality: I remember at SHOT Show back when ASG introduced the ASG CZ Scorpion EVO 3 A1 6mm AEG Airsoft Gun, I was told indirectly that the construction was nearly identical to the real steel CZ Scorpion EVO at least cosmetically as all the internal parts will be specificities to Airsoft. That said this is a very high quality build with the material being for the most part the same as the original with Nylon Fiber PA6 Polymer reenforced plastics and even some CNC machined metal parts as in the outer barrel, flash hidden, barrel nut and even the gear box.
Realism: The ASG CZ Scorpion EVO 3 A1 6mm AEG Airsoft Gun is a bang on replica in terms of emulating the real steel CZ Scorpion EVO and has our weight and feel including a blot catch that locks back when out of ammo and most working components being ambidextrous.
Pros:
Build quality is almost exactly like the real steel version, super high quality materials.
Three shooting modes: semi auto, burst mode and full auto.
Decent mid capacity 75 round magazine with auto empty detection which locks the bolt catch.
Quad rail for lots of add on accessories.
Folding and adjustable stock that can also be removed.
Adjustable and removable iron sights with fiber optic up front and peep in the back.
Working charging handle for easy access to hop-up
Working bolt catch.
High quality electronic and gear box.
Ambidextrous controls for the most part.
Scorpion licensed through ASG.
Orange tip is fairly discreet.
Cons:
Battery compartment is small and hard for quick battery replacement, I recommend using an external setup if possible.
Price point is on the higher side but you get what you pay for.
Comments: On paper and just by looking over and inspecting the ASG CZ Scorpion EVO 3 A1 6mm AEG Airsoft Gun specs out and I am sure I will be pleased when I test it out in the Replica Airguns Indoor Shooting Range. That said this hasn’t happened yet so I will leave my final thumbs up until then. I do wish we had them in stock at the time of this video but there are a lot of other great ASG products in our store and of course many more brands of AEG Airsoft Guns. Hopefully we can get something like this in shortly for everyone so keep checking with us.
My Vimeo Table Top Review Videos for the ASG CZ Scorpion EVO 3 A1 6mm AEG Airsoft Gun:
