Entries in Airsoft,Repeater

Daisy Powerline 5170 CO2 BB Pistol Field Test Review

1 Comment

Make sure to watch my Table Top Review Video if you want more info on the details and specifications for the Daisy Powerline 5170 CO2 BB Pistol! in this Field Test Shooting video I test out the Daisy Powerline 5170 CO2 BB Pistol inside the Replica Airguns indoor Sea Can Airgun Range to see how well it performs in terms of Velocity and Accuracy. The temperature was 20 degrees Celsius (68 degrees Fahrenheit) so not too hot or too cold on this test day. I was also using a brand new CO2 along with 5.1 grain RWS zinc coated steel BB’s.

For the first test to find out what the actual velocity is for the Daisy Powerline 5170 CO2 BB Pistol, I placed 5 rounds through my Chronograph back to back and I was able to get an average of 456 fps with the fastest shoot hitting 460 fps and the slowest shot in the string hitting 451 fps. All within 9 fps of each other so very consistent.

Next I setup a fresh paper target 30 feet down range and proceeded to do my best to obtain a 10 shot grouping using a seated and rested shooting position. Most of the shots form the Daisy Powerline 5170 CO2 BB Pistol where all under 1.5 inches apart, just a little bit high and slightly to the left. I did get a flyer that went a little bit lower than the rest lengthening out the 10 shot grouping to about 2 inches in diameter. I am pretty sure I would be able to get a 1 inch grouping with the Daisy Powerline 5170 CO2 BB Pistol after some practice.

Overall the Daisy Powerline 5170 CO2 BB Pistol performed well for me shooting consistently without any issues. The Daisy Powerline 5170 CO2 BB Pistol is fairly basic in design but does have the added much suppressor that allows for a longer inner barrel giving it a little more fps. You also have the removable sight rail fi you want to add some optical sights or perhaps a laser or tactical light or maybe all of them? Pickup the Daisy Powerline 5170 CO2 BB Pistol in a variety of colors over at the Replica Airguns Online Canada and US Stores!

Categories: 4.5mm / .177 cal, BB, CO2, Field Test, Pistol, Repeater, Review, Semi Auto, YouTube Video Tags: Daisy, Powerline 5170

Crosman P10 Wildcat CO2 BB Pistol Airgun Kit Field Test Review

No Comments

Make sure to watch my Table Top Review Video if you want more info on the details and specifications for the Crosman P10 Wildcat CO2 BB Pistol Airgun Kit! in this Field Test Shooting video I test out the Crosman P10 Wildcat CO2 BB Pistol Airgun Kit inside the Replica Airguns indoor Sea Can Airgun Range to see how well it performs in terms of Velocity and accuracy. The temperature was 20 degrees Celsius (68 degrees Fahrenheit) so not too hot or too cold on this test day. I was also using a brand new CO2 along with 5.1 grain RWS zinc coated steel BB’s.

For the first test to find out what the actual velocity is for the Crosman P10 Wildcat CO2 BB Pistol Airgun Kit I placed 5 rounds through my Chronograph back to back and I was able to get an average of 396 fps with the fastest shoot hitting 404 fps and the slowest shot in the string hitting 389 fps. Interestingly enough the fastest shot was the last shot in my 5 shot string so CO2 cooling did not effect the Crosman P10 Wildcat CO2 BB Pistol Airgun Kit too much.

Next I setup a fresh paper target 30 feet down range and proceeded to do my best to obtain a 10 shot grouping using a seated and rested shooting position. I may have only loaded 9 rounds this time but I was still able to get a good idea on how well the Crosman P10 Wildcat CO2 BB Pistol Airgun Kit performs in the accuracy department. Most of the shots where all under 2 inches and well center on the target with at least 3 or 4 rounds in the bullseye. I did get a flyer that went rather high but we will assume there may have been a bad BB in the bunch shine I did not feel I pulled that shot at all and since the other rods all placed well together well will go with the smaller grouping of under 2 inches.

Overall the Crosman P10 Wildcat CO2 BB Pistol Airgun Kit performed well for me shooting consistently without any issues. The Crosman P10 Wildcat CO2 BB Pistol Airgun Kit is a very basic airgun with your standard double action trigger that will be on the longer side, that said it felt pretty good and was not overly heavy with a fairly predictable pull and release making it easy enough to find your target. Action shooting will be OK too since the trigger is not super heavy for a double action only trigger. Pickup the Crosman P10 Wildcat CO2 BB Pistol in a variety of colors over at the Replica Airguns Online Canada and US Stores!

Categories: 4.5mm / .177 cal, BB, CO2, Field Test, Pistol, Repeater, Review, Semi Auto, YouTube Video Tags: Crosman, P10 Wildcat, Phantom

Replica Airgun Favorite Picks of 2019

No Comments

We had a lot of great new Airguns that I reviewed this year at Replica Airguns. Some of them really stood out to me and so I made a video showing my Favorite Replica Airgun Picks of 2019. Of course there where many other Airguns that could has just as easily made this video but I had to draw the line somewhere and pick the ones that in my opinion where the best of 2019. Make sure to watch my Vimeo video where I go into some more details on why I liked each Airgun.

Below is a list of the top Replica Airgun Picks of 2019:

Pellet Rifles:

BB Rifles:

Airsoft Rifles:

Pellet Pistols:

Airsoft Pistols:

Paintball Guns:

Blank Guns:

BB Pistols:

Categories: .43 cal, 4.5mm / .177 cal, 6mm, 9mm, Airsoft, BB, Blank Gun, Blowback, Break Barrel, CO2, Comparison, Full Auto, Gas, GBB, Paintball, Pellet, Pistol, Repeater, Review, Rifle, Semi Auto, Spring Piston, YouTube Video Tags: Umarex, Glock, KWC, Crosman, SIG Sauer P365, AirVenturi, Tokyo Marui, ROHM

Tokyo Marui Hi-Capa 5.1 D.O.R GBB Airsoft Pistol Table Top Review

1 Comment

Type: GBB AIrsoft Pistol.
Manufacturer: Made by Tokyo Marui.
Model: Hi-Capa 5.1 D.O.R.
Materials: Mostly polymer with metal components.
Weight: 1.85 pounds (839 grams).
Barrel: 4.4 inches (112mm) metal non-rifled.
Propulsion: Green gas.
Action: Semi auto blowback, single action only trigger.
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 31 round drop out full size metal magazine.
FPS: Claimed 365.

Trigger Pull: The single action only trigger pull on the Tokyo Marui Hi-Capa 5.1 D.O.R GBB Airsoft Pistol is extremely nice, there is virtually zero take-up with a light and easy release. You can really hammer out quick shots with this Airsoft pistol. Other than the Tokyo Marui Strike Warrior .45 1911, one of the best 1911 triggers I have tested so far.

Accuracy: At this point I have not shot the Tokyo Marui Hi-Capa 5.1 D.O.R GBB Airsoft Pistol so I have no idea what the actual fps is and how accurate it will be but based on the reputation of Tokyo Marui Airsoft guns I have high expectations from the Tokyo Marui Hi-Capa 5.1 D.O.R GBB Airsoft Pistol when I perform my Field Test Shooting Video.

Build Quality: The Tokyo Marui Hi-Capa 5.1 D.O.R GBB Airsoft Pistol on the outside it is mostly all plastic (Slide and portion of the frame). That said the quality is fantastic, fit and finish is top notch everywhere and you will find metal parts where they need to be as in the inner and outer barrel, trigger, hammer, slide catch release, back strap safety, trigger group, magazine and many more internal parts.

Realism: The Tokyo Marui Hi-Capa 5.1 D.O.R GBB Airsoft Pistol is built on the Colt 45 1911 design but is obviously a more modernized and tacticle version of the classic 1911. The only factor that separates the Tokyo Marui Hi-Capa 5.1 D.O.R GBB Airsoft Pistol from that of a traditional 1911 in design is the lack of a barrel bushing which kind of makes field stripping and access to the Airsoft guns intervals a little bit easier. You still get that 1911 feel and awesome Single Action Only Trigger with your thumb safety and slide catch release in all the familiar places. Of course the Grip safety works as you would expect on a 1911.

Pros:

  • Light and crips flat faced SAO trigger feels great.

  • Fit and finish is excellent, next to zero slide wiggle.

  • Very cool looking tactical modernized 1911.

  • Direct Optic Ready removable rear sight to accommodate for included red dot mounting plates.

  • Optional under-rail plate included.

  • Full size high capacity 31 round double stack metal magazine.

  • Ambidextrous thumb safeties.

  • Working grip safety as you would expect on a 1911 based gun.

  • Most mechanical parts work just like a real steel 1911 and can be easily field stripped to access the hop-up.

  • Super fast blowback action, great for quick action shooting.

  • Decent 1.85 pounds weight considering much of the Airsoft gun is plastic.

Cons:

  • Mostly all plastic build.

  • Does not have the barrel bushing found on traditional 1911’s.

  • No white dots on rear sight.

Comments:

So far I have reviewed three of the Tokyo Marui Airsoft pistols and all three have impressed me. Even with a mostly plastic build at least externally in the slide and frames, these Airsoft Pistols still feel and shoot great even if they are a little on the light side. That may be a plus for some people who want a nice light weight side arm that is not weighing them down on the field. The plastic slides really cycle fast and are super snappy, when combined with short and light tirggers you can pop off rounds amazingly fast and on target. For the price I really think any of the Tokyo Marui Airsoft Guns would be a great choice. I do however have a soft spot for 1911’s and so for me the Tokyo Marui Hi-Capa 5.1 D.O.R GBB Airsoft Pistol would be my choice out of the three I have reviewed so far.

Categories: 6mm, Airsoft, Blowback, Gas, GBB, Pistol, Review, Semi Auto, YouTube Video Tags: Tokyo Marui, Hi-Capa 5.1 D.O.R.

Crosman P10 Wildcat CO2 BB Pistol Airgun Kit Table Top Review

No Comments

Type: Non-blowback CO2 BB Pistol.
Manufacturer: Distributed by Crosman.
Model: P10 Wildcat / Phantom.
Materials: Plastic & metal.
Weight: 1.1 pounds (500 grams).
Barrel: Smooth bore barrel.
Propulsion: CO2 x 1.
Action: Semi auto non-blowback, double action only trigger.
Ammunition Type: 4.5mm steel BB's.
Ammunition Capacity: 20 round drop out plastic magazine.
FPS: Claimed 480.

Trigger Pull: The trigger pull on the Crosman P10 Wildcat CO2 BB Pistol is typical of a Double Action Only Trigger and so you will expect it to be a longer medium to heavy pull. I’d say it’s more of a medium pull, it’s not going to be the fastest action shooter because of this but it will get the job done emptying the 20 round stick magazine quick enough. Like many of these lower cost basic CO2 BB pistols the barrel acts like the hammer in that it does protrude out of the barrel opening when you pull the trigger and snap back upon release.

Accuracy & Power: At this point I have not shot the Crosman P10 Wildcat CO2 BB Pistol so I can only quote what Crosman claims on their packaging in terms of velocity which is a peppy 480fps. We will have to see if this figure is close to the mark when I get to the Field Test Shooting Review for the Crosman P10 Wildcat CO2 BB Pistol, along with test results for accuracy at 30 feet downrange.

Build Quality: The Crosman P10 Wildcat CO2 BB Pistol is mostly all plastic with some metal internal parts where they need to be for strength and durability issues. The Crosman P10 Wildcat CO2 BB Pistol is basically two plastic halves put together with screws on the right side. This may not be the prettiest way to build a CO2 Airgun but it does work and keeps things simple, simple means there are a lot less things to go wrong which means you will have an airgun that is reliable for a long time.

Realism: The Crosman P10 Wildcat CO2 BB Pistol is not a replica of any specific real steel pistol in production but in my opinion it kind of looks like a hybrid of a Beretta and Sig merged together. Obviously the Blue and Pink versions are made to show they are not real steel guns but you can get the P10 in the all black Phantom version which will look more like a real gun. There are few moving parts on the Crosman P10 line of Airguns, just the trigger, safety and magazine release. All other parts are moulded into the plastic with no working slide or even hammer. The CO2 tab is well hidden by the grips but the barrel is not reassessed at all.

Available From: The Replica Airguns Store.

Pros:

  • Blue and pink color scheme may ease some parents when buying a first BB gun.

  • High FPS rating.

  • Non-blowback will get more shots per CO2.

  • Comes with a generic nylon holster you can use with other airguns too .

  • CO2 tab is nicely hidden inside the grip.

  • Double action trigger pull is long but not too firm.

  • Should work with other similar styled magazines commonly found on lower cost BB pistols.

  • Assembled in the US.

Cons:

  • All plastic gun for the most part with just a few internal metal parts.

  • Not many working parts pretty much all moulded gun.

  • Grips fairly loose, don't really snap into place, could fall off easily.

Comments:

I’m not really a big fan of all plastic non-blowback airguns as I have made aware in many of my other videos. That said there is a place for Airguns like the Crosman P10 Wildcat CO2 BB Pistol for those looking to buy an Airgun not so much as a close replace but simply just to shoot at targets and have fun with. The Crosman P10 Wildcat CO2 BB Pistol will do just that very dependably while offering lots of shots per CO2 with a high fps, it should also get reasonable accuracy while doing so. Being able to get it in a variety of colors means you can personalize the Crosman P10 Wildcat CO2 BB Pistol a bit more and the blue and pink versions may be the deciding factor for some parents sitting not the fence on whether or not to allow their young adult or teenager to buy their first CO2 BB Pistol.

Categories: 4.5mm / .177 cal, BB, CO2, Pistol, Repeater, Review, Semi Auto, YouTube Video Tags: Crosman, Phantom, P10 Wildcat

TR5 Pellet Rifle - Schofield No. 3 BB-Pellet Revolver - RG-88 Chrome Blank Pistol Unboxing Preview Video

No Comments

Here we have three very different products I Unbox and Preview for everyone. A Spring Piston multi-shot .177 Caliber Pellet Rifle, a single action BB/Pellet revolver that’s not a Colt! And a really nice looking Semi Auto Blank Pistol in a Chrome finish.

Let’s start with the Air Venturi TR5 Spring Piston 5-shot .177 Caliber Pellet Rifle. I think this is a really well thought out Air Rifle. It’s “almost a Bullpup” in design but it does actually load in front of the trigger just a bit, that said most of the spring piston is behind the trigger setup making it really compact yet with a longer than normal barrel compared to regular Break Barrel Spring Piston Air Rifles. The Air Venturi TR5 Spring Piston 5-shot .177 Caliber Pellet Rifle also has a side lever cocking mechanism along with a 5 round auto indexing magazine which makes it much quicker to cock and reload for fast follow-up shots, again compared to a standard Break Barrel Air Rifle, not to mention no barrel droop! The Air Venturi TR5 Spring Piston 5-shot .177 Caliber Pellet Rifle has a claimed fps of up to 500 so we are getting the max amount of velocity possible for our Canadian laws without making it a regulated firearm and requiring a PAL license. And by the way the Air Venturi TR5 Spring Piston 5-shot .177 Caliber Pellet Rifle does come in both a Lime Green and all Black version just in case you are not a fan of the Lime Green finish I show in this video.

Moving onto the Schofield No. 3 BB/Pellet 6 Shot Revolver Replica, if you like single action revolvers then take a look at the Schofield No. 3 BB/Pellet 6 Shot Revolver Replica. It’s a lot more bulky than a Colt Single Action Revolver and also has that top Break design that makes reloading quick and easy. The version we are selling inner Replica Airgun Online Store is the kit version that comes with 6 BB shells and 6 pellet shells so you can take your pick on ammo types. The barrel is not rifled so Steel BB’s will not hurt the Airgun and since pellets are skirted they do not need a rifled barrel to fly straight and true. You can expect around 445 fps for the Schofield No. 3 BB/Pellet 6 Shot Revolver Replica.

Last up is one of my favorite Blank firing Semi Auto Pistols which I have already full reviews in the all Black version so checkout those Video Reviews for more info on the ROHM RG-88 line of Front Firing 9mm Blank Pistols. All I really wanted to show you guys with the ROHM RG-88 9mm PAK Blank Pistol in Polished Chrome is how awesome it looked with the Polished Chrome finish and that we do have more choices now than we use to have in terms of what finish you can get your ROHM RG-88 in. Personally I like the Polished Chrome finish the best but you can also get it in all Black and Matte Chrome, so you decide which one you like the best.

Categories: 4.5mm / .177 cal, 9mm, BB, Blank Gun, CO2, Pellet, Pistol, Repeater, Review, Revolver, Rifle, Semi Auto, Spring Piston, YouTube Video Tags: AirVenturi, TR5, Schofield No. 3, ROHM, RG-88

2019 Replica Airguns Halloween Contest Giveaway

No Comments

There are two parts to they video, the Halloween Costume Contest and what’s going on next week so make sure to watch it all…

Part 1 - 2019 Replica Airguns Halloween Contest Giveaway

Contest Rules:

  • Must be 18+ to receive a prize.

  • Canada & US winners only.

  • Halloween Costumes must have a weapon of some sort in them.

  • Must post a Halloween costume video to your YouTube channel.

  • Your video must be named "2019 Replica Airguns Halloween Contest Giveaway".

  • November 9th is the deadline date for you to get your video in.

  • Must post a comment in this video letting me know you have a video for me.

  • Must be a subscriber to the Replica Airguns channel.

  • Must like this video

1st, 2nd and 3rd Prizes Awarded:

What’s going on next week?

I will be away competing in a Body Building Fitness Contest so there will not be any more videos that week.

You may have noticed I have been withering away this past couple of months. This is in preparation for a Fitness Contest I am going into. For a show like this you need to be super lean to be competitive.

I have been competing since 2015 mainly in Men’s Physique and have qualified myself over the years to compete at the National level in Amateur Body Building.

The competition I am going to is the GNC / ALLMAX Canadian National Pro Qualifier in Toronto. If I do really well I can possibly get an IFBB Pro Card. Getting an IFBB Pro Card means I would now be able to compete in Pro Body Building competitions.

In order to win the Pro Card I would need to win my hight class and then win the overalls against the other winners in their hight class.

To date I have come close to winning the IFFB Pro Card but just missed it on two occasions. I am hoping to get the IFBB Pro Card this times around but I know the competition will be very competitive.

Categories: 4.5mm / .177 cal, 6mm, Airsoft, BB, Blowback, CO2, Full Auto, Replica Airguns News, Semi Auto, Pistol, Rifle, YouTube Video Tags: Crosman, Bushmaster MPW, KWC, Taurus PT24 24/7, Umarex, Makarov PM, Makarov

Tokyo Marui FNX-45 Tactical GBB Airsoft Pistol TableTop Review

1 Comment

Type: GBB Airsoft Pistol.
Manufacturer: Made by Tokyo Marui.
Model: FNX-45 Tactical.
Materials: Mostly polymer with metal components.
Weight: 1.8 pounds (830 grams).
Barrel: 4.4 inches metal non-rifled.
Propulsion: Green gas.
Action: Semi auto blowback, singled double action trigger.
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 29 round drop out full size metal magazine.
FPS: Claimed 366.

Trigger Pull: The single action trigger pull on the Tokyo Marui FNX-45 Tactical GBB Airsoft Pistol is light and smooth with just a bit of take-up and a crisp release. You can also shoot in double action, as expected the trigger pull in double action will be longer and heavier but it’s still pretty smooth and not at all heavy.

Accuracy: At this point I have not shot the Tokyo Marui FNX-45 Tactical GBB Airsoft Pistol so I have no idea what the actual fps is and how accurate it may be but I can say I like the feel of how it dry fires so if that’s any indication as to how well it performs then I have high hopes for the Tokyo Marui FNX-45 Tactical GBB Airsoft Pistol.

Build Quality: The Tokyo Marui FNX-45 Tactical GBB Airsoft Pistol even though on the outside it’s all plastic (Slide and frame), the quality is fantastic, fit and finish is top notch everywhere and you will find metal parts where they need to be as in the inner and outer barrel, trigger, hammer, slide catch release, back strap safety, trigger group and many more internal parts.

Realism: The Tokyo Marui FNX-45 Tactical GBB Airsoft Pistol is virtually an exact replica of a Real Steel FNX-45 Tactical, looking at photos online of the powder burning version it is nearly impossible to tell them apart. You will find FN licensing in all the right places but keep in mind Tokyo Marui does not actually hold an FN license so yours will come with black stickers over the FN markings. Easy enough to take off :) In terms of functionality the Tokyo Marui FNX-45 Tactical GBB Airsoft Pistol operated pretty much exactly like the real steel version including the ability to field strip it for easy Hop-up adjustments.

Pros:

  • Ultra realistic Replica of the FNX-45 with authentic markings.

  • Removable slide cover allows mounting of red dot sight.

  • 16mm CW threaded barrel is mock suppressor-ready.

  • Multiple grip backstraps for a custom fit to your hand size.

  • Overall quality, fit and finish is excellent.

  • Easy to see white dot sights front and back.

  • Full size full metal magazine.

  • Ambidextrous safety, slide catch and magazine release.

  • Can easily put a mock suppressor on it.

  • Comes with additional internal barrel lengths for a mock suppressor or no meat tenderizer setup.

  • All mechanical parts work just like a steel FNX-45.

  • Super fast blowback action, great for action shooting.

Cons:

  • Mostly all plastic build.

  • Not actually licensed by Tokyo Marui.

Comments:

I am really liking the Tokyo Marui product line and welcome it to our Canada Replica Airguns Store. The Tokyo Marui FNX-45 Tactical GBB Airsoft Pistol is one the nicest quality Airsoft guns I have reviewed so far, it really is a work of art. The only thing that would be nice is a metal slide but I can live without it since everything else about the gun is nearly perfect! The Tokyo Marui FNX-45 Tactical GBB Airsoft Pistol is really built for everyone, left hand or right handed, large or small hands, the full set of ambidextrous controls and interchangeable back-straps will take care of you.

Categories: 6mm, Airsoft, Blowback, Gas, GBB, Pistol, Review, Semi Auto, YouTube Video Tags: Tokyo Marui, FNX-45 Tactical

Tokyo Marui Strike Warrior .45 1911 GBB Airsoft Pistol Table Top Review

No Comments

Type: GBB Airsoft Pistol.
Manufacturer: Made by Tokyo Marui.
Model: Marui Strike Warrior .45 1911.
Materials: Mostly polymer with metal components.
Weight: 1.8 pounds (816 grams).
Barrel: 3.9 inches metal non-rifled.
Propulsion: Green gas.
Action: Semi auto blowback, single action only trigger.
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 28 round drop out full size metal magazine.
FPS: Claimed 366.

Trigger Pull: The single action only trigger pull on the Tokyo Marui Strike Warrior .45 1911 GBB Airsoft Pistol is extremely nice, there is virtually zero take-up with a light and easy release. You can really hammer out quick shots with this Airsoft pistol. One of the best 1911 triggers I have tested so far.

Accuracy: At this point I have not shot the Tokyo Marui Strike Warrior .45 1911 GBB Airsoft Pistol so I have no idea what the actual fps is and how accurate it may be but I can say I like the feel of how it dry fires so if that’s any indication as to how well it performs then I have high hopes for the Tokyo Marui Strike Warrior .45 1911 GBB Airsoft Pistol.

Build Quality: The Tokyo Marui Strike Warrior .45 1911 GBB Airsoft Pistol even though on the outside it’s all plastic (Slide and frame), the quality is fantastic, fit and finish is top notch everywhere and you will find metal parts where they need to be as in the inner and outer barrel, trigger, hammer, slide catch release, back strap safety, trigger group and many more internal parts.

Realism: The Tokyo Marui Strike Warrior .45 1911 GBB Airsoft Pistol is built on the Colt 45 1911 design but as you can see it comes in a compact version with a very tactical and aggressive look. You can tone it down a bit by removing the “Meat Tenderize” from the front basically turning it into a straight forward Tactical 1911 Compact version.

Pros:

  • Custom Detonics style slide and outer barrel.

  • Meat tenderizer-like Strike Face muzzle gives gun aggressive appearance.

  • 20mm underside rail for laser or flashlight attachment.

  • Squared-off SAO trigger guard with short-stroke trigger pull.

  • Fit and finish is excellent.

  • Easy to see white dot sights front and back.

  • Full size full metal magazine.

  • Very cool looking tactical compact 1911.

  • Ambidextrous safety.

  • Comes with additional internal barrel lengths for a Mock suppressor or no Meat tenderizer setup.

  • Working grip safety as you would expect.

  • All mechanical parts work just like a real steel 1911.

  • Super fast blowback action, great for action shooting.

Cons:

  • Mostly all plastic build.

  • Can not field strip easily and get to the hop-up adjustment with the Meat tenderizer on it.

Comments:

This is my first real experience with a Tokyo Marui product and I have to say I am very impressed with their build quality and design. Even though the slide and frame are plastic, there is enough metal going on in this Airsoft pistol to give it decent enough weight and feel. I really like what Tokyo Marui did with the styling of the Tokyo Marui Strike Warrior .45 1911 GBB Airsoft Pistol with the Meat tenderizer-like Strike Face muzzle, squared-off trigger guard and overall tactical look and feel. A great addition to the Replica Airguns Canada Online Store!

Categories: 6mm, Airsoft, Blowback, Gas, GBB, Pistol, Review, Semi Auto, YouTube Video Tags: Tokyo Marui, Strike Warrior .45

Tokyo Marui New Product Preview Unboxing Video

No Comments

TokyoMaruiLogo.jpg

I though I would feature the fact that we recently added some of the Tokyo Marui product line to our Canada Replica Airguns Store. Tokyo Marui is said to be one of the best Airsoft products on the market and they have been around for a while so they have had time to get it right! As Tokyo Marui is a Japanese based company they are restricted to only being able to use plastic frames and slides but even with this limitation the Tokyo Marui products that I have personally looked at are extremely well made.

In this Tokyo Marui New Product Preview Unboxing Video I take a look at 4 Tokyo Marui models; the Tokyo Marui Strike Warrior .45 1911 Gas Blowback Airsoft Pistol, the Tokyo Marui Hi-Capa 5.1 D.O.R (Direct Optics Ready) GBB Airsoft Pistol, the Tokyo Marui FNX-45 Tactical Gas Blowback Airsoft Pistol and lastly the Tokyo Marui VSR-10 Pro Sniper Bolt Action Airsoft Rifle.

Tokyo Marui Strike Warrior .45 1911 Gas Blowback Airsoft Pistol

  • Type: Airsoft Pistol

  • Manufacturer: Tokyo Marui

  • Model: Strike Warrior .45

  • Materials: ABS

  • Weight: 816 g (1.8 lb)

  • Length: 205 mm (8.1 in)

  • Barrel: 74 mm (2.9 in), metal

  • Power Source: Green Gas

  • Action: Semi-automatic, blowback

  • Ammo Type: 6mm airsoft BBs

  • Ammo Capacity: 28 rounds

  • FPS: 366

Tokyo Marui Hi-Capa 5.1 D.O.R (Direct Optics Ready) GBB Airsoft Pistol

  • Type: Airsoft Pistol

  • Manufacturer: Tokyo Marui

  • Model: Hi-Capa 5.1 D.O.R.

  • Materials: Polymer and metal

  • Weight: 839 g (1.85 lb)

  • Length: 220 mm (8.7 in)

  • Barrel: 112 mm (4.4 in), metal

  • Power Source: Green Gas

  • Action: Semi-automatic, blowback

  • Ammo Type: 6mm airsoft BBs

  • Ammo Capacity: 31 rounds

  • FPS: 366

Tokyo Marui FNX-45 Tactical Gas Blowback Airsoft Pistol

  • Type: Airsoft Pistol

  • Manufacturer: Tokyo Marui

  • Model: FNX-45 Tactical

  • Materials: ABS

  • Weight: 830 g (1.8 lb)

  • Length: 220 mm (8.7 in)

  • Barrel: 113 mm (4.4 in)

  • Power Source: Green Gas

  • Action: Semi-automatic, blowback, single/double-action

  • Ammo Type: 6mm airsoft BBs

  • Ammo Capacity: 29 rounds

  • FPS: 366

Tokyo Marui VSR-10 Pro Sniper Bolt Action Airsoft Rifle

  • Type: Airsoft Rifle

  • Manufacturer: Tokyo Marui

  • Model: VSR-10 Pro Sniper vers.

  • Materials: ABS

  • Weight: 1.9 kg (4.2 lb)

  • Length: 107.5 cm (42.3 in)

  • Barrel: 430 mm (17 in)

  • Power Source: Spring

  • Action: Bolt action

  • Ammo Type: 6mm airsoft BBs

  • Ammo Capacity: 30 rounds

  • FPS: 366

Categories: 6mm, Airsoft, Blowback, Comparison, GBB, Gas, Pistol, Review, Replica Airguns News, Rifle, Semi Auto, Spring Piston, YouTube Video Tags: Tokyo Marui, VSR-10 Pro, FNX-45 Tactical, Hi-Capa 5.1 D.O.R., Strike Warrior .45

Webley Nemesis Bolt Action CO2 Pellet Pistol Table Top Review

No Comments

Type: CO2 Bolt action pellet pistol.
Manufacturer: Distributed by Webley.
Model: Webley Nemesis.
Materials: Metal & Polymer.
Weight: 2 pounds (907 grams).
Barrel: 6.25 inches metal rifled.
Propulsion: CO2 x 1.
Action: Bolt action repeater, single action only trigger.
Ammunition Type: .177 / .22 caliber pellets.
Ammunition Capacity: 14/ 12 round double sided rotary magazines.
FPS: Claimed 430 / 370.

Trigger Pull: The trigger pull on the Webley Nemesis Bolt Action CO2 Pellet Pistol is rather good, there is just a little bit of take up with a light and crisp release. You will have to work the bolt to engage the internal hammer for single action only shooting.

Accuracy: This is one of those times when I actually have already done my Field Test Shooting Video for the Webley Nemesis Bolt Action CO2 Pellet Pistol and it performed well. My test version was the .177 caliber model with a claimed fps of 430 and I got exactly that with a 5 shot average sting on my Chronograph. I was using 6.9 grain lead pellets so not the lightest or heaviest pellets. I then placed 14 rounds into my paper target setup 30 feet down range and proceeded to get a 1.5 inch 14 round grouping. That’s with no previous time shooting this Airgun so I know it is for sure capable of sub 1 inch grouping with open sights. Keep in mind you can mount a laser, red dot or optical sight on this Airgun very easily for even better potential accuracy!

Build Quality: The Webley Nemesis Bolt Action CO2 Pellet Pistol on the outside is pretty much an all plastic Airgun but it does have good weight to it at 2 pounds so there must be a fair amount of internal metal parts. The barrel and bolt for sure are metal! The plastic does seem very good quality with nice fit and finish throughout the Airgun.

Realism: The Webley Nemesis Bolt Action CO2 Pellet Pistol is not styled specially to look like any particular one gun but I have to say it does have an overall Glock look to it but in a much larger form factor. For a CO2 bolt Action Pellet Pistol it is fairly modern looking compered to other target styled pellet pistols out there.
Available From: The Replica Airguns Store.

Pros:

  • First multi-shot rotary mag CO2 Pellet pistol I have come across.

  • Good accuracy and power!

  • Can add a red dot or optical sight to it using the top built in Dovetail rail.

  • Can add a laser or tac light using the bottom built in Weaver Picatinny rail.

  • Has a nice modern look to it for a target pellet pistol.

  • Rifled steel barrel.

  • Fiber optic sights adjustable for windage.

  • Nice light and short single action trigger.

  • Allen key and magazine storage compartment built into airgun.

  • Would be good for small pest control because of decent fps and good accuracy.

Cons:

  • Doesn’t like all pellet sections.

  • Sights are not adjustable for elevation.

Comments:

The Webley Nemesis Bolt Action CO2 Pellet Pistol is not really a Replica Airgun so to speak but it’s nice to shoot a dedicated target pellet pistol once in a while and the Webley Nemesis Bolt Action CO2 Pellet Pistol is that for sure but with a more modern and cool looking exterior than most. The Webley Nemesis Bolt Action CO2 Pellet Pistol is also one of the first bolt action Air pistols I have come across that has a rotary magazine which combined with decent power and accuracy could make it usable for small pest control since you do have quick follow up shots just in case the first shot doesn't get the job done. I will say the Webley Nemesis Bolt Action CO2 Pellet Pistol is a bit pellet picky especially if the skirting on your pellet choice is narrow. I would advise you to choose a more chunky pellet with a wider skirt which will make magazine indexing smooth and consistent.

Categories: .22 cal, 4.5mm / .177 cal, CO2, Pellet, Pistol, Repeater, Review, YouTube Video Tags: Webley, Nem

Webley Nemesis Bolt Action CO2 Pellet Pistol Field Test Review

No Comments

Make sure to watch my Preview Table Top Review for the Webley Nemesis Bolt Action CO2 Pellet Pistol if you’re looking for more specifications and details.

The Webley Nemesis is a really interesting CO2 Pellet Pistol, so far I have not reviewed an Airgun like it. Yes I have reviewed bolt action CO2 Pellet Pistols in the past but not one with a rotary magazine for much quicker followup shots. This is by no means as quick as a semi auto shooter but being able to quickly work the bolt action without having to manually place a pellet in the breach area sure does speed things up.

On the box Webley claims up to 420 fps with the ,177 caliber version the Webley Nemesis is a really interesting CO2 Pellet Pistol I was testing and I was able to get an average of 430 fps using a brand new CO2 along with RWS 6.9 grain lead pellets. I did find the RWS pellets I was using did not feed all that well perhaps because they had a fairly narrow waist on them which does effect the way pellets are held in the rotary magazine. The temperature was fairly normal at right around room temperature.

For my accuracy portion of the Field Test Shooting Video for the Webley Nemesis is a really interesting CO2 Pellet Pistol, I switched to Sig Sauer .177 caliber lead pellets and they worked much better in terms of chambering cleanly for me. I found the Webley Nemesis is a really interesting CO2 Pellet Pistol shot a bit high on my paper target placed 30 feet away, so I set my sights on the bottom ring which placed almost all my 14 shots right in the bullseye. My 14 shot string was grouping around 1.5 inches but I am sure the Webley Nemesis is a really interesting CO2 Pellet Pistol could shoot quarter sized objects at 30 feet downrange all day long once you get use to it.

The trigger on the Webley Nemesis Bolt Action CO2 Pellet Pistol is one of the highlights of this air pistol, it really feels great. Combine this with nice high consistent fps and excellent accuracy and the Webley Nemesis is a really interesting CO2 Pellet Pistol is a great target shooter with potential for up close small pest control.

Categories: 4.5mm / .177 cal, .22 cal, CO2, Field Test, Pellet, Pistol, YouTube Video, Repeater Tags: Webley, Nemesis

G&G GPM1911 GBB Airsoft Pistol Field Test Review

No Comments

I’m going to start off by saying this Field Test Shooting Review for the G&G GPM1911 GBB Airsoft Pistol did not go all that well as I had some complications with this Airgun when chambering rounds. I am pretty sure it is magazine related and hope to try a different magazine with it soon. I say this because I am following through with my review regardless of my initial results to demonstrate that not all Airguns perform as expected during my reviews and sometimes you get a lemon even with a good quality brand like G&G.

I am fairly certain the defect in this case for the G&G GPM1911 GBB Airsoft Pistol was the magazine tip being too tight and not allowing an Airsoft BB to position all the way to the top of the magazine which means when the slide cycled and the nozzle was in position to push an Airsoft BB into the breach, it simple was hitting the top of the BB and pushing it even further into the magazine. All said and done I was able to test the fps and accuracy on target so let’s get on with my review.

Using .20 gram Airsoft BB’s with a fully filled propane gas magazine in my G&G GPM1911 GBB Airsoft Pistol, I was able to get 6 recoreded shots through my Chronograph averaging 319 fps. The slowest shot being 313 fps and the fastest shot hitting 330 fps. The temperature was right around room temperature so around 22 degrees Celsius or 72 degrees Fahrenheit.

As I was having issues with with the G&G GPM1911 GBB Airsoft Pistol chambering rounds with the .20 gram Airsoft BB’s. I was hoping that when I switched to a different .32 gram Airsoft BB for my target portion of this review that perhaps the different Airsoft BB’s would chamber better but they did not. To get through the target portion of my test, with each shot I had to drop the magazine, make sure the Airsoft BB’s was at the top of the magazine, rack the slide, insert the magazine and then release the slide. So as you can see I was resetting completely for each shot which does not always make for the tightest groupings. Surprisingly I was still able to get about a 1.5 inch grouping on my paper target setup 30 feet downrange using a rested and seated shooting position.

Not all reviews go as planned but you still have to make the best of it. I really feel the G&G GPM1911 GBB Airsoft Pistol is a good gun overall even though mine did not perform that well for me. When I was able to chamber a round it shot a consistent fps and placed Airsoft BB’s downrange accurately and very close to the bullseye. Perhaps simply by swapping out the magazine I will have a much more reliable Airsoft gun? I will have to get back to you on that one.

Categories: 6mm, Airsoft, Blowback, Field Test, Gas, GBB, Pistol, Review, Semi Auto, YouTube Video Tags: G&G, GPM1911, 1911, M1911 A1

G&G GPM1911 GBB Airsoft Pistol Table Top Review

2 Comments

Type: Gas Blowback Airsoft Pistol.
Manufacturer: G&G
Model: GPM1911
Materials: Metal slide, frame & Magazine.
Weight: 2.25 pounds (1020 grams).
Length: 8.66 inches (22.0 cm) total.
Barrel: 4.58 inches (11.7 cm), Metal non-rifled smooth bore.
Propulsion: Green gas or propane.
Action: Blowback, single action only.
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 25 rounds.
FPS: 300-330 fps.

Trigger Pull: The single action only trigger pull on the G&G GPM1911 GBB Airsoft Pistol is what you would expect from a traditional single action only 1911 trigger, a very short take-up and a crips and light release. Great for getting a lot fo shoots off quickly and accurately down range without making your trigger finger do a lot of work.

Accuracy: I have not done my actual Field Test Shooting video review for the G&G GPM1911 GBB Airsoft Pistol so I can into comment just yet but I will be making a Field Test Shooting Video for it as soon as I can and will post that here on the website and of course over on the Replica Airguns YouTube channel when I have it ready.

Build Quality: The G&G GPM1911 GBB Airsoft Pistol is in my opinion one for the nicer looking finishes wise and I would have to say it seems to also be one of the better quality 1911 Airguns out there, for sure a step up from a KWC blowback 1911’s and in line with what KWA and KJWorks is making these days which is good quality. The G&G GPM1911 GBB Airsoft Pistol is one of the heavier Airsoft 1911 Blowback Pistols which makes me think the metal is a bit higher quality where it needs to be. Tolerances are nice and tight and the blowbacks action is very heavy.

Realism: The G&G GPM1911 GBB Airsoft Pistol like most of these full blowback 1911 Airguns, Steel BB or Airsoft BB, is super realistic with an all metal build. All the real steel working parts like the slide catch release, back strap safety and pretty much everything else function as they should. The G&G GPM1911 GBB Airsoft Pistol even field strips like a traditional 1911 pistol. Not sure what you could do to make it more authentic for an Airgun?

Available in the: Replica Airguns Store

Pros:

  • Nice high capacity magazine compared to other GBB 1911 Airsoft pistols.

  • Heavier than most Airsoft 1911’s.

  • All parts fit nice and tight, tolerances are very good.

  • Working back-strap safety.

  • No ugly red tip.

  • Finish is really nice, gun looks really good.

  • Expect to get decent amount of shots per gas fill.

  • Micro Gas Filter and Whirl Cylinder Valve help to manage gas efficiency and reduced frost buildup.

  • Traditional adjustable Hop-up.

  • Full Size Dropout metal magazine pretty standard on Airsoft pistols.

  • Comes with high quality hard shell case and speed loader.

Cons:

  • Sights are pretty basic, no white dots and non-adjustable as you would expect on a 1911 A1.

  • Very simple Airsoft gun, no modern bits and pieces on it.

  • FPS could be a bit higher but fine for close quarters.

Comments:

The G&G GPM1911 GBB Airsoft Pistol is for sure one of the nicer 1911 A1 styled Airsoft pistols, inline with KWC and KJWorks. It does come in a little bit heavier and seems to have more blowback recoil action which is nice. All I need to do now is find out how well it shoots! If it’s not half bad then it is for sure worth the price which by the way is a little bit cheaper than a KWA or KJWorks 1911 and about the same price as a KWC 1911. So many choices I know but that’s a good thing :)

My Table Top Review of the G&G GPM1911 GBB Airsoft Pistol:

Categories: 6mm, Airsoft, Blowback, Comparison, Gas, GBB, Pistol, Review, Semi Auto, YouTube Video Tags: G&G, GPM1911

Webley Nemesis and G&G GPM1911 Unboxing Preview Video

No Comments

I keep getting more and more really cool airguns to review and it’s been hard to keep up with them all and get out Table Top and Field Test videos for each new product. I at least want to be able to get the word out so to speak for some of the new Airguns that come across my tassel even if I may not be able to get to their full reviews right away.

That said I have two new Airguns that we have in our Replica Airguns Stores to show everyone, the Webley Nemesis in .177 Caliber Pellet and the G&G GPM1911 GBB Airsoft Pistol. Both could not be any more different for sure but I really like each of them for their own reasons.

The Webley Nemesis is a very unique CO2 powered pistols since it is bolt action like many of the corpsman pistols but the Webley Nemesis .177 Caliber Pellet Pistol comes with a duel sided rotary magazine that holds 7 rounds on each side, the .22 caliber version holds 6 rounds on each side. The .177 caliber version can shoot up to 450 fps while the .22 caliber version has a claimed fps of up to 370. I look forward to testing and reviewing the Webley Nemesis .177 Caliber Pellet Pistol as soon as I can.

I also showcase the G&G GPM1911 GBB Airsoft Pistol which is a well priced basic A1 styled 1911 that is really well built and about one of the heaviest full metal 1911’s I have come across to date hitting the scale at nearly 2 pounds and 4 ounces. Another Replica Airgun I look forward to treating out!

Categories: .22 cal, 4.5mm / .177 cal, 6mm, Airsoft, Blowback, CO2, GBB, Gas, Pellet, Pistol, Review, Semi Auto, YouTube Video Tags: Webley, Nemesis, G&G, GPM1911

Umarex Legends Cowboy Shell Ejecting CO2 BB Rifle Review

1 Comment

This Review for the Umarex Legends Cowboy Shell Ejecting CO2 BB Rifle is a bit different than most I do since usually I perform a dedicated Table Top and Field Test Reviews for each gun I review here on the Replica Airguns Website. I feel that since the Umarex Legends Cowboy Shell Ejecting CO2 BB Rifle is such a “long gun” that showing it on the table would not work so well , plus it was a super nice day and I wanted to get outside and maybe even shoot a little bit.

I will be performing my usual Field Test Shooting video where I test the Feet Per Second and accuracy at 30 feet so stay posted for that. For now I will leave you with this outdoor “Show and Tell” review.

Specifications:

Type: CO2 BB Rifle.
Manufacturer: Umarex
Model: Umarex Legends Cowboy
Materials: Mainly metal with plastic stock.
Weight: 5.95 pounds (2699 grams).
Length: 38 inches total length
Barrel: 19.25 inch Metal non-rifled smooth bore.
Propulsion: Dual 12 gram CO2.
Action: Lever Action.
Ammunition Type: 4.5mm Steel BB's.
Ammunition Capacity: 10.
FPS: 410 fps.

Trigger Pull: The trigger pull on the Umarex Legends Cowboy Shell Ejecting CO2 BB Rifle is pretty much a single action only trigger since you will need to work the lever action to not only elect and chamber a shell but to also pre cock the hammer. Once the hammer is cocked and ready the trigger pull is short, light and crips, perfect for accurate shooting.

Accuracy: I have only shot 16 rounds through the Umarex Legends Cowboy Shell Ejecting CO2 BB Rifle during the making of this review video and found the Umarex Legends Cowboy Shell Ejecting CO2 BB Rifle to shoot right on target at 30 feet out. I did notice it shot just slightly high at this range but not a lot and it was dead center windage wise. For longer ranges you can adjust the rear sight to raise the barrel even more. In terms of power it’s hard to say what I was getting, Umarex says it should hit around 410 fps, I felt like it was pretty close to this , maybe a tad bit faster but I will find out for sure when I perform my Field Test Shooting Video Review shortly.

Build Quality: The Umarex Legends Cowboy Shell Ejecting CO2 BB Rifle looks and feels great coming in at nearly 6 pounds and built out of mostly metal with a plastic stock. Don’t be too put out by the plastic stock, it does mimmic the part of wood very well. All the metal parts have a semi-gloss or I would even say matt back finish and so far the paint is wearing pretty good, no noticeable paint coming off that I can see. The action works great with no failure to chamber, eject or shoot rounds.

Realism: The Umarex Legends Cowboy Shell Ejecting CO2 BB Rifle is an awesome example of the classic lever action cowboy rifle. Having the ejecting shells makes it feel like you are shooting the real deal right from the time you start loading up the 10 shells into the pipe magazine, until you work that lever action and pull the trigger. Watching the ejected shells fly through the air is the icing on the cake :) There is not much more you can ask for from a BB firing replica Lever Action Cowboy Rifle!

Pros:

  • Super realistic replica lever action BB firing Cowboy Rifle.

  • Fully working lever action, chambers and ejects shells perfectly.

  • Good weight and feel to it with lots of metal throughout.

  • Everything works exactly like the real steel version.

  • Duel CO2 to help get not only more shots before reloading CO2 but also a more consistent FPS from all shots.

  • Adjustable rear sight for elevation.

  • Comes with 10 rounds and can also use your Umarex Colt Single Action Army BB shells in it.

  • Plastic imitation wood stock looks very much like real wood.

Cons:

  • Stock is not real wood, hopefully Umarex offers a wood upgrade for it at some time.

  • A bit low in FPS, why not take it right up to 499 fps since the US version has a 600 fps rating.

  • Took too long for us to get it here in Canada!.

Comments:

The Umarex Legends Cowboy Shell Ejecting CO2 BB Rifle is a perfect example of an Airgun company listening to their customers and bringing to market exactly what we are looking for, kind of like the Single Action Army Revolvers that came out a while back. These old cowboy guns are a blast to shoot from the time you pick up the rifle, insert 10 shells into the magazine, work the lever action, pull that trigger and then repeat 10 times. This is a must have for anyone looking for a super realistic BB rifle, even if you’re not an old west cowboy fan I think you will love shooting the Umarex Legends Cowboy Shell Ejecting CO2 BB Rifle!

My Table Top Video of the Umarex Legends Cowboy Shell Ejecting CO2 BB Rifle:

Categories: 4.5mm / .177 cal, BB, CO2, Field Test, Review, Repeater, Rifle, YouTube Video Tags: Umarex, Legends Cowboy Rifle

Air Venturi Springfield Armory XDM BB vs Airsoft Pistol Comparison

1 Comment

For more of a traditional Table Top Features and Specifications video for the Air Venturi Springfield Armory XDM Air Pistol, then watch my Table Top Review for the Airsoft Springfield Armory XDM here.

Since both the 6mm Airsoft and 4.5mm Steel BB Air Venturi Springfield Armory XDM’s are nearly identical with only a few exceptions, I didn’t feel it was necessary to make another almost identical Table Top Video for the Steel BB firing Air Venturi Springfield Armory XDM. Instead I want to focus mainly on the differences in this comparison video.

Watch my Video for all the main differences but in short here they are for those reading this post:

  • Steel BB version uses CO2 while the Airsoft version uses Green Gas or Propane.

  • There is no orange tip on the Steel BB version while Airsoft versions come with orange tips installed.

  • Steel BB versions have 20 round full length magazines for both the 3.8 and 4.5 inch versions, while the Airsoft 3.8 compact comes with the shorter 14 round magazine and the Airsoft 4.5 comes with a longer 25 round magazine.

  • FPS for the Steel BB versions are 270fps for the 3.8 and 325fps for the 4.5, comparably the Airsoft 3.8 is claimed to have 280fps with the 4.5 version a bit higher at 330fps. (Keep in mind that steel BB’s weigh more at around .33 grams compared to the .20 gram plastic Airsoft BB’s used for testing).

  • I did notice that on the sliver slide version, my earlier Airsoft 4.5 had more of a parkerized metallic finish while my same Steel BB version I received at a later time had more of brushed stainless look to it. Air Venturi has since informed me that all silver slide version will now have the brushed stainless finish.

Categories: 6mm, 4.5mm / .177 cal, Airsoft, Blowback, CO2, Comparison, Gas, GBB, Pistol, Review, Semi Auto, YouTube Video Tags: AirVenturi, Springfield Armory, XDM

Air Venturi Springfield Armory XDM GBB Airsoft Pistol Table Top Review

No Comments

Type: Gas Blowback Airsoft Pistol.
Manufacturer: Air Venturi
Model: Springfield Armory XDM 3.8 & 4.5 Inch
Materials: Metal slide & Mag with Polymer frame.
Weight: 1.75 & 1.9 pounds  (794 & 861 grams).
Length: 7.25 & 8.25 inches total length
Barrel: 3.8 & 4.5 inch Metal non-rifled smooth bore.
Propulsion: Green gas or propane.
Action: Blowback, single action only.
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 14 & 25 rounds.
FPS: 280-330 fps.

Trigger Pull: The single action only trigger pull on the Air Venturi Springfield Armory XDM GBB Airsoft Pistol is pretty much what you would expect on a striker fired SAO pistol. There is very little take up with a light release which should make for great action shooting and help with accuracy when slowing things down a bit.

Accuracy: This time I actually have done my Field Test Shooting video for the Air Venturi Springfield Armory XDM GBB Airsoft Pistol and it did pretty good, getting a 2 inch 10 round grouping from 30 feet away shooting just a bit low on the target, nothing a bit of hop-up adjustment shouldn’t be able to account for. The claimed fps is 330 for the 4.5 inch version and I was able to average right around 300.

Build Quality: At SHOT Show this year I commented on the Air Venturi Springfield Armory XDM Pistols and how great they looked and felt. Nothing really different now that I have them in my hands for review. I did notice that my AIrsoft version with the Silver Slide had a kind of metallic parkerized finish while my BB Silver Slide version has a more stainless steel look. I prefer the Stainless Steel look a lot more and feel it makes the Air Venturi Springfield Armory XDM Pistols look higher quality. Hopefully Air Venturi sticks with the Stainless Steel finish? Build quality and finish are good thought the gun.

Realism: The Air Venturi Springfield Armory XDM GBB Airsoft Pistol is really one of the best 1 to 1 copies I have seen out there. It looks pretty much identical including all the licensing and markings in all the right places. It also is full blowback with a full size drop out metal magazine and all the mechanical working parts work the same as the real steel version including the trigger safety, grip safety, slide catch release, take down leaver and magazine release. Field striping is done just like the 9mm big brother allowing for easy hop-up adjustments.

Available in the: Replica Airguns Store

Pros:

  • Excellent construction, great fit and finish.

  • Full heavy Blowback operation.

  • Lots of metal parts where the real steel version would also have them.

  • Fully Field Strippable.

  • Adjustable Hop-up.

  • Easy to use sights, fiber optic up front and white dot on the back.

  • Springfield Armory fully Licensed.

  • Working serial number, trigger and backstop safeties.

  • Comes with different sized back straps for small to large hands.

  • Rail for adding accessories.

  • Warning instructions are nice and discreet!

  • Your choice of compact or full size versions also in all black or silver slide.

  • Performed well in my Field Test Shooting Review getting a 2 inch 10 shot grouping and close to the claimed fps.

Cons:

  • Comes with the orange tip we all love but should be pretty easy to remove.

  • Sights are non-adjustable. Can use Hop-up to bring shots up or down.

  • Silver Slide Airsoft version finish is not my favorite.

Comments:

Like I said at SHOT Show this year I was super impressed with the entire Springfield Armory lineup and now that I have them in my hands I am still just as impressed with the Air Venturi Springfield Armory XDM GBB Airsoft Pistols. You are getting pretty much what everyone looks for in a Replica Airgun: 1 to 1 size and similar weight, full blowback action, full size drop out metal magazine, fully licensed, adjustable hop-up, filed strippable and similar build materials you would find as compared to the real steel 9mm version. I also like that you have a ton of choice offered by Air Venturi: Airsoft or BB, 3.8 inch compact or 4.5 inch full size, silver or black slide and even short lower capacity or longer high capacity magazines for the 3.8 inch version.

My Table Top Review of the Air Venturi Springfield Armory XDM GBB Airsoft Pistol

Categories: 6mm, Airsoft, Blowback, GBB, Gas, Pistol, Review, Semi Auto, YouTube Video Tags: AirVenturi, Springfield Armory, XDM

Air Venturi Springfield Armory XDM GBB Airsoft Pistol Field Test Review

No Comments

In this Field Test Shooting Video I test out the Air Venturi Springfield Armory XDM GBB Airsoft Pistol in the Indoor Airgun Shooting Range to see what the real world velocity is and just how accurate it will be at 30 feet. I don't have my Table Top Video for the Air Venturi Springfield Armory XDM GBB Airsoft Pistol just yet but will get to it shortly.

Using .20 gram BB’s I loaded up the Air Venturi Springfield Armory XDM GBB Airsoft Pistol with propane gas and placed several rounds through my Chronograph to see what the feet per second average would be. The last 5 shots I took where actual the fastest averaging 290 fps, a little bit slower than I was expecting but just about right for close quarters Airsoft games.

I then switched over to .32 gram Airsoft BB’s since they tend to be a bit more accurate out at longer ranges. Using a fresh paper target and shooting from a rested and seated position 30 feet away, I took 10 shots with the Air Venturi Springfield Armory XDM GBB Airsoft Pistol. The result was a 10 round grouping of about 2 inches with one straggler just outside the main group. The Air Venturi Springfield Armory XDM GBB Airsoft Pistol did shoot a little bit low at 30 feet but I am sure the hop-up can be adjusted for this. It was well centered left to right which is a good thing since the sights are non-adjustable.

I really like the Air Venturi Springfield Armory XDM GBB Airsoft Pistol, it looks and feels very solid with a nice balance in the hand. The Single Action Only Trigger is short and light making follow up shots quick and responsive. The blowback action is crisp with good simulated recoil. I look forward to trying out the Steel BB version of the Air Venturi Springfield Armory XDM GBB Pistol as soon as I get my hands on one which should be pretty soon. Take your pick, Airsoft or Steel BB, either is a great choice!

Categories: 6mm, Airsoft, Blowback, Field Test, GBB, Gas, Pistol, Review, Semi Auto, YouTube Video Tags: AirVenturi, Springfield Armory, XDM

Top 5 most often asked Questions I Can Not help you with!

No Comments

I do my best to get back to everyone with a question I have the answer to but there are times when I simply do not have the answer to your question. And for some reason these questions seem to come more often than others. I figured I would address these questions that I can not answer so you will know the reasons why and that I’m not just being a jerk by not answering them for you.

Here is a list of my Top 5 most often asked Questions I Can Not help you with:

  1. Can you send this gun to …

  2. How much is this item where I live?

  3. How do I fix this problem with my gun?

  4. Which Airgun should I buy?

  5. Can this Airgun kill a …

Categories: BB, Airsoft, Blank Gun, Pistol, Rifle, YouTube Video Tags: