Type: GBB Airsoft Pistol. Manufacturer: Cybergun Model:FN Herstal FNX-45 Tactical. Materials: Metal and polymer construction. Weight: 1.8 Pound (820 grams). Barrel Length: 4.8 inch (12.2 cm). Total Length: 8.9 Inches (22.6 cm). Propulsion: Green gas or propane Action: Single and double action. Ammunition Type: 6mm plastic Airsoft BB’s. Ammunition Capacity: 25 round magazine. Max FPS: 380 fps.
Trigger Pull: The Cybergun FN Herstal FNX-45 Tactical GBB Airsoft Pistol has a single and double action trigger setup. Both feel pretty good with a surprisingly light double action trigger pull, the blowback action will cock the hammer between shots allowing for the vast majority of your shots being single action which you will find are short and very light. There is a little bit of take-up followed by a crisp light release.
Accuracy: So far I have not made my Field Test Shooting Video for the Cybergun FN Herstal FNX-45 Tactical GBB Airsoft Pistol. Keep posted for my upcoming Field Test Shooting Video for the Cybergun FN Herstal FNX-45 Threaded Barrel GBB Airsoft Pistol, until then I can not really comment on the shooting results.
Build Quality: The build quality of the Cybergun FN Herstal FNX-45 Tactical GBB Airsoft Pistol feels really good, it has a nice weight to it and feels really solid in the hand. The materials used look good and have an excellent finish to them. There is just a bit of a slide wiggle but not excessive. You will find metal parts where you would expect them to be like in the slide, barrel components, magazine, slide catch release, take-down leaver, hammer and lots of internal parts.
Realism: In terms of realism the Cybergun FN Herstal FNX-45 Tactical GBB Airsoft Pistol is pretty much the spitting image of the real steel version with all the markings and licensing in all the right places. Mechanically everything works about the same including full field strip-ability with full ambidextrous controls.
Pros:
Build quality feels really good.
Full length blowback action.
Accurate licensed TFN Herstal FNX-45 Tactical replica.
Trigger pull is nice in both single and double action.
Picatinny rail for adding accessories like a tac light or laser.
Double stack full size drop out metal magazine holds the gas and 25 Airsoft BB’s
Comes with additional back-strap in smaller size for smaller hands.
White dot high rise front and back sights suitable for compensators.
Fully ambidextrous controls.
Easily Filed Strippable.
Tip is easy to remove for addition of a mock compensator.
Adjustable Bax Hop-up
Cons:
Sights are not adjustable.
Just a little bit of slide wiggle.
Comments: The Cybergun FN Herstal FNX-45 Tactical GBB Airsoft Pistol is a really great looking gun. The quality is on par with KWA and KJ Works in my opinion. I’m not sure who actually makes it as Cybergun is the license holder and distributer but I feel like the Cybergun FN Herstal FNX-45 Tactical GBB Airsoft Pistol is a step up from the standard KWC gun often used as the base. I look forward to testing out the Cybergun FN Herstal FNX-45 Tactical GBB Airsoft Pistol in the Sea Can indoor Airgun Shooting range to see how it performs. I’ll be testing with the short barrel and with the barrel extension installed to see what the fps difference is between the two.
My Vimeo Table Top Review for the Cybergun FN Herstal FNX-45 Tactical GBB Airsoft Pistol:
In this Table Top Preview video I take a look at two Blowback Airsoft Pistols one Distributed by Cybergun and the otters Distributed by ASG. Both are very similar in that they have threaded barrels which makes them much suppressor ready the big difference being that the ASG CZ P-09 is CO2 powered while the FN Herstal FNX-45 is Green Gas or Propane powered. IN this video I talk about the specifications and details and also show both Airsoft Pistols up nice and close.
Type: Pellet Revolver. Manufacturer: Gamo Model:PR-776. Materials: Mostly metal construction. Weight: 2.2 Pounds (1 kg). Barrel Length: 6 inches Total Length: 11.5 inches. Propulsion: CO2 x1 Action: Revolver single and double action. Ammunition Type: .177 caliber pellets. Ammunition Capacity: 8 rounds per magazine. Max FPS: 400+ fps.
Trigger Pull: The Gamo PR-776 CO2 .177 Caliber Pellet Revolver has your traditional revolver single and double action trigger setup. In double action, the trigger is going to be a bit longer and heavier but it feel fairly smooth with no real friction points and I would consider it to have a medium trigger pull. When you cock the hammer back placing the Gamo PR-776 CO2 .177 Caliber Pellet Revolver in single action, the trigger pull becomes very short with virtually no take-up at all and the weight of the trigger is very light allowing for more accurate shots.
Accuracy: Make sure to watch my Field Test Shooting video for the Gamo PR-776 CO2 .177 Caliber Pellet Revolver where I test out the velocity and accuracy in the Replica Airguns Indoor Airgun Shooting Range. In summary the Gamo PR-776 CO2 .177 Caliber Pellet Revolver shot a little bit hotter than claimed at just over 400 fps using around 7 grain lead pellets. In terms of accuracy with a total of 16 shots the grouping spread out to around 4 inches but I am pretty sure a different pellet choice may have made a difference.
Build Quality: The build quality of the Gamo PR-776 CO2 .177 Caliber Pellet Revolver is pretty good overall. It is mostly all metal with the exception of the grips of course, Fit and finishes looks good, everything feel snug adn tight with the exception of the pistol grips. I feel like the grips could easily move out of place and get caught on something. This is not a problem when shooting, more so when in a holster. The Gamo PR-776 CO2 .177 Caliber Pellet Revolver feels good in the hadn't, nice and solid and with a good weight to it.
Realism: The Gamo PR-776 CO2 .177 Caliber Pellet Revolver is a decent looking Airgun in the style of a traditional revolver, I wouldn’t say it’s an exact replica of any specific revolver in production but it does tick off all the boxes in terms of looking realistic. The weight and feel for now and the Gamo PR-776 CO2 .177 Caliber Pellet Revolver also has a recessed barrel and hidden CO2 crew. The only real giveaway would be the cylinder size as it is a bit smaller than expected and of course is chambered for .177 caliber pellets.
Pros:
Good power over 400 fps using actual lead pellets.
Quicker reloading over shell loading revolvers
More shots per magazine reload, 8 versus 6.
Comes with two metal 8 round magazines.
Traditional single and double action trigger.
White dot front sight with fully adjustable rear sight.
Good weight and feel to it.
Fit and finish look good.
Recessed barrel for realistic looking barrel opening.
Should be able to use a dovetail type scope mount for adding on a red dot or magnified scope.
Cons:
Not a fan of the loose pistol grip setup to access the CO2.
Was hoping to get a bit tighter grouping but may have been a pellet choice issue.
Comments: It was nice reviewing the Gamo PR-776 CO2 .177 Caliber Pellet Revolver as it was a bit different then most of today shell loading revolvers. I like that the Gamo PR-776 CO2 .177 Caliber Pellet Revolver still offered a realistic looking cylinder that the shell loading revolvers have but with the moon clip style magazines that allow for quick adn easy reloading of 8 rounds at a time. The velocity or power of the Gamo PR-776 CO2 .177 Caliber Pellet Revolver was even a bit high than Gamo claims using PBA Platinum pellets since Gamo claims 400 fps using these 5.1 grain lead pellets. My testing with closer to 7 grain pellets yielded fps up and over 400 fps. All the Gamo PR-776 CO2 .177 Caliber Pellet Revolver needs is to be just a little bit more accurate but I feel this may simply be more of a pallet choice, once you find a pellet the Gamo PR-776 CO2 .177 Caliber Pellet Revolver likes I am pretty sure it will deliver accurate shots.
My Table Top Review for the Gamo PR-776 CO2 .177 Caliber Pellet Revolver:
Make sure to watch my upcoming Table Top Review for the Gamo PR-776 CO2 .177 Caliber Pellet Revolver where I go over the specifications, pros and cons and show it up nice and close. In this Field Test Shooting Video I determine what the accuracy and velocity of the Gamo PR-776 CO2 .177 Caliber Pellet Revolver by testing out the fps with my Chronograph along with a accuracy test shooting a paper target at a distance of 30 feet away using a rested shooting position.
For the velocity test I placed a brand new CO2 Cartridge in the Gamo PR-776 CO2 .177 Caliber Pellet Revolver and shot five 6.9 grain lead pellets though my Chronograph. Gamo claims their 5.1 grain PBA Platinum pellets will shoot around 400 fps so I was expecting something in the low to mid 300’s but was surprised at a five shot average of 4115 fps with the much heavier RWS6.9 grain pellets. The slowest shot I achieved was 396 fps while the fastest shot was 434 fps. The temperature was right around 24 degrees Celsius or 75 degrees Fahrenheit.
For the next section of my Field Test Shooting Review I setup a brand new paper target 30 feet down range and loaded up two eight round magazines. The results for the Gamo PR-776 CO2 .177 Caliber Pellet Revolver where a bit confusing with both eight round magazines. It seemed like most of the shots wanted to group within about 1-2 inches of each other but I was getting several outliers that extended the grouping to closer to four inches. Not the best performance but as I have found with many guns, sometimes you need to find a pellet that the gun is happy with. the wrong pellet can really make a difference and I am fairly sure this was the case with the Gamo PR-776 CO2 .177 Caliber Pellet Revolver using the RWS pellets. just not the best choice for it.
The Gamo PR-776 CO2 .177 Caliber Pellet Revolver overall performer well, like I said I really think pellet choice will be the deciding factor in how accurate it is going to be. The velocity was very good for a CO2 Pellet revolver considering I was suing actual lead pellets and not the alloy pellets Gamo was using as their reference. The Gamo PR-776 CO2 .177 Caliber Pellet Revolver uses metal eight round magazines which are easy to preload and allow for two additional shots over the more common these days shell loading revolvers, which makes the Gamo PR-776 CO2 .177 Caliber Pellet Revolver more practical as a target pistol allowing for more power and easier loading.
In this Field Test Shooting Video I test out the Jag Arms SPX2 Scattergun Green Gas Airsoft Shotgun to see what the fps velocity is when shooting in 3 and 6 round burst modes. I also shoot a target 30 feet away again in both 3 shot burst and 6 shot burst mode tor see what the accuracy and groupings look like.
Starting with the velocity performance of the Jag Arms SPX2 Scattergun Green Gas Airsoft Shotgun. Using .25 gram Airsoft BB’s I placed several shots through my chronograph in 3 shot burst mode and averaged around 325 fps. When I switched over to 6 round burst mode the fps did not really change much averaging 321 fps. This was interesting since I thought adding Airsoft BB’s would slow the fps down but it did not.
I then setup a paper target 30 feet away to test out the accuracy or should I say grouping of the Jag Arms SPX2 Scattergun Green Gas Airsoft Shotgun. I was not excepting any 1 or two inch groupings since the Jag Arms SPX2 Scattergun Green Gas Airsoft Shotgun is designed to shoot like a shotgun and spread out the BB’s to some degree. I did find that the Jag Arms SPX2 Scattergun Green Gas Airsoft Shotgun out of the box shot a bit low but the front sight is adjustable for elevation so this is easy to correct. In both 3 and 6 round burst mode hitting the approximate 1 foot by 1 foot target was no problem and at this distance I would say the Airsoft BB’s spread out about 3-4 inches form each otters in both 3 and 6 shot burst modes.
Overall the Jag Arms SPX2 Scattergun Green Gas Airsoft Shotgun is a really fun Airsoft Shotgun to shoot. You get a lot of shots per green gas fill (around 100) and the fps is right on the money just over 300 fps both 3 and 6 shot burst. If you are looking for something a bit different then what most people are using on the field than the Jag Arms SPX2 Scattergun Green Gas Airsoft Shotgun will for sure catch some looks.
Type: Pump Action Shotgun. Manufacturer: Jag Precision Model:Jag Arms SPX2 Scattergun. Materials: Mostly aluminum metal construction. Weight: 4 Pounds (1.8 kg). Barrel Length: 11 inches Total Length: 31 inches. Propulsion: Green gas or propane Action: Pump action 3/6 rounds burst. Ammunition Type: 6mm Airsoft BB’s Ammunition Capacity: 28-30 rounds per shell. Max FPS: 350-400 fps.
Trigger Pull: Since the Jag Arms SPX2 Scattergun Green Gas Airsoft Shotgun is a pump action shotgun you will need to work the pump action to load rounds into the barrel and cock the internal firing mechanism. The tigger is then engaged as a single action only trigger. The trigger pull is short and light. You can also hold the trigger down and pump the action for quick repetition shooting.
Comes pretty much fully loaded, nothing really to add on unless you want to customize it.
Tons of shots per gas fill with expected good fps.
Fully adjustable and removable pop-up iron sights.
AR compatible pistol grip and but stock.
Multiple mounting points for a sling.
Side saddle holds 6 rounds, 2 more just in case can be placed in the magazine tube.
3 or 6 round burst selectable.
The SPX2 comes in tan or black, lots of other options available.
Well priced for what you get compared to other gas Airsoft shotguns
Cons:
Does come with an orange tip but I am sure it can be removed.
Pump tube will show wear marks over time.
Will not be as accurate as an Airsoft rifle.
Comments: The Jag Arms SPX2 Scattergun Green Gas Airsoft Shotgun is a really cool product. So far I have not come across a Green Gas Pump Action Airsoft Shotgun so this was a real treat for me. The build quality and the realism of the Jag Arms SPX2 Scattergun Green Gas Airsoft Shotgun is what I really like. It feels like a real shotgun and even performs much like one. Having the ability to shoot either 3 or 6 round bursts is also nice. If you want more shots per shell load then you can use the 3 round option, likewise if you select 6 round burst for more ammo down range with each shot. I like that the Jag Arms SPX2 Scattergun Green Gas Airsoft Shotgun comes pretty much all tricked out so you really don’t need to spend additional money on a bunch of accessories which adds a lot of value to this purchase.
My Table Top Review for the Jag Arms SPX2 Scattergun Green Gas Airsoft Shotgun:
The Umarex T4E TR50 .50 Caliber Paintball Revolver is an interesting Paintball pistol, it has a very different look and also uses .50 caliber Paintballs which are a little bit less common than the .68 and .43 caliber paintball gun I have been reviewing up until now. The Umarex T4E TR50 .50 Caliber Paintball Revolver is some countries is marketed as a self defense gun but those versions do have a little bit more fps and foot pounds of energy. The version I am testing is not marketed here in Canada or the US as self defense products but rather as more of a training Paintball Gun.
Starting with my Chronograph velocity test I placed 5 Rubber Balls through my Chronograph using a brand new CO2. The Rubber balls I am going to say are a little bit heavier than standard Paintballs and Umarex claims the Umarex T4E TR50 .50 Caliber Paintball Revolver is capable of hitting around 360 fps so with the heavier rubber balls I was expecting a little bit under the max fps. I was able to get an average of 328 fps so not bad at all.
Moving on to my accuracy test. I need up placing 10 of my 12 rounds into the paper target as I had two rounds that went off in what I am going to call an uncontrolled manor. The 10 rubber paintball rounds that did hit my paper target that was setup 30 feet down range all hit within about 6 inches of each other daily well centered left and right and a little bit low on the target. Gettin back to the uncontrolled shots, I had a situation where I pulled the trigger and the Umarex T4E TR50 .50 Caliber Paintball Revolver went click as you would expect but no CO2 was expelled and so no round was shot. I thought perhaps the cylinder was caught up so I went to wiggle it to try and free it up. As I did so the gun went off without my finger anywhere near the trigger. I am glad I was using rubber balls since the rubber ball hit my cabinet leaning a biota a mark but really causing any damage. This happened twice with the same cylinder, the second time I was bit more prepared for it and had the gun pointed well downrange. I was not able to recreate this problem again so perhaps the cylinder magazine was not seated properly but this still concerns me a bit.
Overall I really like the Umarex T4E TR50 .50 Caliber Paintball Revolver, it’s a pretty cool looking Paintball Gun with decent accuracy and power, you can even feel a little push back and barrel lift when you shoot it. I also like that you can preload a CO2 and puncture it whenever hypo are ready to shoot with a quick smack on the bottom of the grip. Just made sure to put the CO2 in the right way :)
My systems setup for a more powerful airgun as I was shooting .22 caliber lead pellets with about 11-12 foot pounds of energy. Direct hits passing through the 3/4 inch cut outs had no problem laying down the metal paddles and resetting the paddles was a lot easier than I though it would be even way back 50 feet.
I did not have my Sig Sauer Virtus PCP .22 Caliber Air Rifle perfectly sighted in so I did have to aim low and to the left which made it a bit harder dropping the plates but I did manage to get the job done at least for providing a decent test video fo the Rx Target Systems for the purposes of this video.
Make sure to not only watch my Field Test Shooting video included in this post but also checkout my Rx Target Systems Preview Video where I show it up and close and also go into more details on the Rx Target Systems and how modular and versatile it really is.
I want to thank David Bitkowski from Rx Target Systems for providing me with this sample unit to share with the Replica Airguns community. This video is only a Preview video as I wanted to get the RX Target System out there before I follow up with my actual Table Top and Shooting Videos for it.
For now here are some of the key points I want to get out to everyone:
Mission: Rx Target Systems are meant to bridge the gap between firearms and airguns. They allow high precision shooting on a reactive, three- dimensional, rugged target that can be carted around in a back pack. What makes Rx Target Systems unique is that it is a system. It is so modular and adaptable with interchangable faceplates and paddles. Rx Target Systems are not going to break or get dented or dissembled on the range as many of the lighter gauged steel targets on the market today vs today’s high powered airguns.
Modular
One base allows interchange of faceplates for different target configurations
One threaded axel allows interchange of paddle from 10 gauge to 3/8 inch-thick paddles
Portable
Mount it on a shelf indoors
Mount it on a sawhorse outdoors
Carry it in a backpack or duffle bag- its 10 pounds
Rugged
Solid steel design
Faceplates from 10 gauge to ¼ inch thick
3-Dimensional
Faceplate is offset from paddles
Clipping the aperture does not guarantee a score
Intentions of target configurations
Standard 1 inch bulls.- represents kill zone of many small game at 30 yards, great for sighting in prior to the hunt. Also is ¼ scale of bull used in rapid fire pistol when shot from 8.3 meters. (25 meters distance/100mm bull)
1.2 inch bulls- represents the 4-10 ring of the NRA 10 meter air rifle target. Gears the shooter to consistently hitting the “black” of that target on paper
AAFTA style- represents common kill zones found in American Airgun Field Target Assosciation using 1.5”, 1”, ¾", ½", and 3/8”.
WFTF style- represents common kill zones found in World Field Target Federation using 15mm, 25mm, and 38mm apertures
10-15- Inspired by customer request, uses 10mm and 15mm apertures. High-Precision shooting.
Unfortunately the microphone system I was using for some reason did not record the Lapel Microphones we where record the audio with for this ASG SHOT Show 2020 Interview Video. The Camera we where recording video with did record audio but as there is so much back ground noise going on at large show like this, the audio is far from good. That all said try do you your best to listen to what we are discussing. There are sections where the audio is fairly distinguishable and sections in the video that are not due the proximity of the camera.
Bob from ASG and I go over serval products for ASG at SHOT Show 2020 this year. We first take a look at the new ASG Shadow 2 CO2 Blowback BB Pistol. One interesting fact about the new ASG Shadow 2 is that it has an internal Hop-up system that help BB’s travel further out for longer range shooting. The ASG Shadow 2 also has a fully adjustable rear sight making this Blowback CO2 BB Airgun a potentially pretty decent target pistol.
Another new product from ASG we focused on is the Airsoft ASG B&T Universal Service Weapon designed for first responder situations. The ASG B&T USW has an extended rear frame allowing for a non-recipricating red dot sight placement. The ASG B&T Universal Service Weapon has a built in folding stock and you can trick it out with all kinds of add ons to make it your own.
Near the end of the video we took a look at some new ICS Airsoft offerings from ASG.
This isn’t a SHOT Show 2020 Interview but most certainly worth reporting on. While walking around SHOT Show I ventured into the Chiappa Booth as I own a .22 caliber 1911 styled pistol from them and they do have some interesting products to take a look at.
Then I saw a red tip on one of their Chiappa Rhino Revolvers which caught my eye since I was not aware that Chiappa was making an Airgun version of their Rhino. Well as it turns out they are hoping to be shipping both an Airsoft version and Steel BB version around spring time and from what I can tell there will be two finishes, a kind of Gold Satin finish and also a Back finish version. As is with a lot of revolvers these days they will be shell loading which will help them look the part of a real steel Chiappa Rhino Revolver.
Looking forward to getting my hands on one when they come out in Spring this year!
This year at SHOT Show 2020 Mark from Umarex had a nice variety of new product to go over with us. Mark first went over the new CO2 Blowback Pellet firing Glock 17 which has a similar magazine and loading system as the Umarex SA10 Pellet Pistol.
We then took a look at another Glock replica, the Glock 18C Full Auto GBB Airsoft pistol with extended magazine, this one is sure to be a lot of fun with its selectable full auto feature and high capacity magazine. Perfect for hammering targets downrange or used as a very capable backup Airsoft pistol in the field.
Probably one of my favorites at the Umarex Booth this year was the Umarex Thompson M1A1 Legends Series CO2 Blowback Machine Gun. And yes it’s full auto capable along with blowback operation and a full size drop metal magazine that holds the CO2 and Steel BB’s. A nice addition to the Legends series of Pistols and Rifles.
Something really different this year for Umarex are the AirJavelin and AirSaber, two arrow firing rifles, the AirJavelin is CO2 powered and more tactical looking but still has more than enough power to shoot medium sized game, great for pest control while the bigger and (480 fps 178 foot pound) more powerful AirSaber is PCP powered and can be used for larger game like deer and wild bore. And it even looks like we will be selling these Arrow firing rifles in our Canada Replica Airguns Store with no PAL firearms license required!
This year Sig Sauer was showcasing their Airsoft Pistols with a new line called the Proforce series geared towards high end training. Sig has also included new Reflex Red Dot Sights that can be ordered already on the gun or as an add on accessory. The Proforce Pistol line includes both the M17 and M18 series Sig Sauer pistols.
Last year at SHOT Show 2019 Sig had introduced their Virtus .22 Caliber PCP Semi Auto Rifle but it was not ready at that time. Well now the Sig Sauer Virtus is ready to ship and yours truly will be getting one of these bad boys for review! Since the .22 caliber PCP Sig Sauer Virtus shoots around 700 fps with a 12 foot pound energy level you will need a PAL firearms license if you live in Canada but the Sig Sauer Virtus is a considered a “long gun” so no registration will be required in Canada.
Watch my Sig Sauer SHOT Show 2020 Las Vegas Interview for more info and cool stuff presented by Stephanie from Sig Sauer.
Here we go again, another round of SHOT Show videos brought to you direct from Replica Airguns!
As always I like to start off with a Teaser Video with a few quick clips of some of the new products I had the opportunity to take a look at at this years SHOT Show 2020 Las Vegas.
I will be rolling out Interview Videos as quickly as I can edit them and put them together for the following Airgun Related companies:
Sig Sauer
Umarex
Crosman - Velocity Outdoors
ASG
Air Venturi
Chiappa
So sit back and enjoy this years Replica Airguns SHOT Show 2020 Las Vegas Teaser Video!
Type: Paintball Gun. Manufacturer:Umarex - T4E. Model:T4E TR50 Materials: Metal & Polymer. Weight: 726 grams (1.6 pounds). Barrel: Smooth bore. Power Source: 1x12 gram CO2. Action: Revolver - Double action only trigger. Ammo Type: .50 Caliber Paintball or Rubber Ball. Ammo Capacity: 6 Rounds x 5 magazines. FPS: 360.
Trigger Pull: The trigger pull on Umarex T4E TR50 .50 Caliber Paintball Revolver is double action only but not very long with a very different feel than I am use to. The best way to describe it is kind of lumpy, it starts out a bit firm and then eases off a lot just before it releases. Like climbing a hill and then coasting down the otters side. I will have to see how it feels when it’s all loaded up with CO2 and Paintballs and actually shooting at a target.
Build Quality: The build quality of the Umarex T4E TR50 .50 Caliber Paintball Revolver is good overall. It is a mostly plastic build with some metal parts where they need to be internally. It is essentially two plastic halves held together by screws with the few actual mechanical working external parts. You have the trigger with it’s working trigger safety, the removable magazine and magazine release and of course the quick puncture CO2 screw knob. The hammer is internal. The Umarex T4E TR50 .50 Caliber Paintball Revolver is not very heavy but it does feel really solid in the hand.
Expected fairly high fps power of 360 with .50 caliber paintballs, a bit too high for your average paintball field but perhaps powerful enough to discourage an intruder?
Lots of mounting option for accessories like a tac light, laser or other sighting option with it’s upper and lower picatinny rail setup.
Quick CO2 pierce system so you can leave a CO2 in it ready to go any time with no worries about CO2 leaking out.
Working Trigger Safety.
Comes with 5 total magazines you can preload ready for use.
Super non-complicated design. Once loaded with CO2 and Paintballs all you need to do is hit the CO2 knob and then pull the trigger.
Build quality feels good, the gun is fairly beefy but not overly heavy or hard to hold.
Cons:
Mostly all plastic build.
Sights do not have white dots on them and are not adjustable.
Do not expect a lot of shots per CO2. Will find out when I do my Field Test Shooting Review.
Comments:
The Umarex T4E TR50 .50 Caliber Paintball Revolver is an interesting Paintball gun, overseas versions are marketed as the HDR50 which stands for “Home Defense Revolver”, while the North American version is marketed as the TR50 or “Training Revolver”. This is mainly because in the Europe most countries are not allowed to own real handguns but can own “Self Defense handguns”. In North America as most people are well aware, in the US real handguns are very easy to obtain and can be used for self defense. Just across the border here in Canada we can not really purposely have on hand anything that we plan to use as a weapon for self defense so the Umarex T4E TR50 .50 Caliber Paintball Revolver is marketed as a Training Revolver. What’s the difference? Not much, our North American 360 fps version is a lot like the 7.5 joule German version in terms of power but you can also get a more powerful 11 joule version in the UK. All that said, the Umarex T4E TR50 .50 Caliber Paintball Revolver at least here in Canada is made and marketed as a Paintball gun but on the field may be too powerful? What you decide to do with it is up to you!
We had a lot of great new Airguns that I reviewed this year at Replica Airguns. Some of them really stood out to me and so I made a video showing my Favorite Replica Airgun Picks of 2019. Of course there where many other Airguns that could has just as easily made this video but I had to draw the line somewhere and pick the ones that in my opinion where the best of 2019. Make sure to watch my Vimeo video where I go into some more details on why I liked each Airgun.
Below is a list of the top Replica Airgun Picks of 2019:
Type: GBB AIrsoft Pistol. Manufacturer: Made by Tokyo Marui. Model:Hi-Capa 5.1 D.O.R. Materials: Mostly polymer with metal components. Weight: 1.85 pounds (839 grams). Barrel: 4.4 inches (112mm) metal non-rifled. Propulsion: Green gas. Action: Semi auto blowback, single action only trigger. Ammunition Type: 6mm plastic Airsoft BB's. Ammunition Capacity: 31 round drop out full size metal magazine. FPS: Claimed 365.
Trigger Pull: The single action only trigger pull on the Tokyo Marui Hi-Capa 5.1 D.O.R GBB Airsoft Pistol is extremely nice, there is virtually zero take-up with a light and easy release. You can really hammer out quick shots with this Airsoft pistol. Other than the Tokyo Marui Strike Warrior .45 1911, one of the best 1911 triggers I have tested so far.
Build Quality: TheTokyo Marui Hi-Capa 5.1 D.O.R GBB Airsoft Pistol on the outside it is mostly all plastic (Slide and portion of the frame). That said the quality is fantastic, fit and finish is top notch everywhere and you will find metal parts where they need to be as in the inner and outer barrel, trigger, hammer, slide catch release, back strap safety, trigger group, magazine and many more internal parts.
Realism: The Tokyo Marui Hi-Capa 5.1 D.O.R GBB Airsoft Pistol is built on the Colt 45 1911 design but is obviously a more modernized and tacticle version of the classic 1911. The only factor that separates the Tokyo Marui Hi-Capa 5.1 D.O.R GBB Airsoft Pistol from that of a traditional 1911 in design is the lack of a barrel bushing which kind of makes field stripping and access to the Airsoft guns intervals a little bit easier. You still get that 1911 feel and awesome Single Action Only Trigger with your thumb safety and slide catch release in all the familiar places. Of course the Grip safety works as you would expect on a 1911.
Pros:
Light and crips flat faced SAO trigger feels great.
Fit and finish is excellent, next to zero slide wiggle.
Very cool looking tactical modernized 1911.
Direct Optic Ready removable rear sight to accommodate for included red dot mounting plates.
Optional under-rail plate included.
Full size high capacity 31 round double stack metal magazine.
Ambidextrous thumb safeties.
Working grip safety as you would expect on a 1911 based gun.
Most mechanical parts work just like a real steel 1911 and can be easily field stripped to access the hop-up.
Super fast blowback action, great for quick action shooting.
Decent 1.85 pounds weight considering much of the Airsoft gun is plastic.
Cons:
Mostly all plastic build.
Does not have the barrel bushing found on traditional 1911’s.
No white dots on rear sight.
Comments:
So far I have reviewed three of the Tokyo Marui Airsoft pistols and all three have impressed me. Even with a mostly plastic build at least externally in the slide and frames, these Airsoft Pistols still feel and shoot great even if they are a little on the light side. That may be a plus for some people who want a nice light weight side arm that is not weighing them down on the field. The plastic slides really cycle fast and are super snappy, when combined with short and light tirggers you can pop off rounds amazingly fast and on target. For the price I really think any of the Tokyo Marui Airsoft Guns would be a great choice. I do however have a soft spot for 1911’s and so for me the Tokyo Marui Hi-Capa 5.1 D.O.R GBB Airsoft Pistol would be my choice out of the three I have reviewed so far.
Another Field Test Shooting Video Review coming for the Replica Airguns Sea Can Indoor Airgun Shooting Range! In todays Shooting Review I test out the Schofield No. 3 CO2 BB-Pellet Revolver using both 4.5mm 5/1 grain Steel BB’s and .177 Caliber 6.9 grain Lead Pellets to see how well they perform in velocity and accuracy. As always I use a brand new CO2 for my velocity testing and for reference the temperature during my testing in the Sea Can was 23 degrees Celsius or 73 degrees Fahrenheit. For my accuracy portion of the shooting test I use a rested and seated shooting position shot 30 feet away from my fresh paper targets.
Starting off with the velocity or power potion of my Field Test Shooting Video for the Schofield No. 3 CO2 BB-Pellet Revolver. I first used the 4.5mm Steel BB shells and shot 3 rounds through my Chronograph averaging 369 fps. I then loaded up the Schofield No. 3 CO2 BB-Pellet Revolver with pellet shells and again placed three .177 caliber lead pellets through my Chrony and got a very similar result with an average of 361 fps. Keep in mind the lead pellets where 6.9 grain versus the steel BB’s at only 5.1 grain, so the lead pellets will be carrying more raw energy at the point of impact even though they where going just a tad bit slower than the steel BB’s.
In terms of accuracy both rounds performed about the same shooting at my paper target 30 feet away. Since the Schofield No. 3 CO2 BB-Pellet Revolver has a 6 round cylinder I shot 6 sounds for each test, 6 steel BB’s and then 6 lead pellets. I also changed the targets for each type of ammo between reloading. I found the Schofield No. 3 CO2 BB-Pellet Revolver shot fairly close to the bullseye, l but with both the Steel BB’s and lead pellets I got one outlier that spread out my groupings significantly, the other 5 rounds where all close being about 2 inches apart? Perhaps it was a bad or misshaped round, or maybe even me ;) I did notice the lead pellets seemed to have a really nice 4 round group out of the 6 that all fell within the bullseye. Hard to really say if BB’s or pellets performed better than the other one at least in my testing.
Overall the Schofield No. 3 CO2 BB-Pellet Revolver shot well for me, the trigger is nice and short and light making placing your shots easy, of course since it is a single action only trigger you kind of need to reset yourself between every shot which can effect groupings just a bit. Since the barrel is not rifled with no danger of damaging the rifling, you can really shoot what ever ammo type you feel like shooting or have on hand and since Schofield No. 3 CO2 BB-Pellet Revolvers get about the same speed and accuracy then it really doesn’t matter that much at the end of the day!
Type: BB/Pellet air revolver. Manufacturer/Distributor: Bear River. Model: Schofield No. 3 Materials: Mostly metal with plastic grips. Weight: 2.4 pounds. (1089 grams) Barrel: 7 inch (178mm) smooth bore barrel. Propulsion: 12 gram CO2. Action: Revolver, single action only. Ammunition Type: 4.5mm steel BB's and .177 Cal. Pellets. Ammunition Capacity: 6 rounds. FPS: 445fps.
Trigger Pull: The trigger pull on the single action only Schofield No. 3 CO2 BB-Pellet Revolver is what you would expect from a pistol of this design. Like the Colt Single Action Army the trigger pull is very short, light and crips, perfect for taking your time and getting a precise shot on target. You will of course have to cock the hammer manually before each shot ao no real action shooting.
Accuracy: I have not tested the Schofield No. 3 CO2 BB-Pellet Revolver in the Replica Airguns Sea Can Indoor Airgun Range but plan to get to it shortly. I will test out both 4.5mm Steel BB’s and some .177 caliber lead Pellets and see how the different ammo types effect both power and accuracy. Keep in mind the Schofield No. 3 CO2 BB-Pellet Revolver has a smooth bore barrel but I am pretty sure pellets will still perform well at 30 feet away.
Build Quality: The Schofield No. 3 CO2 BB-Pellet Revolver is built a lot like the Webley MK VI .455 CO2 Shell Loading Revolver line, perhaps even made in the same factory in Taiwan? The Schofield No. 3 CO2 BB-Pellet Revolver is pretty much an all metal construction other than the plastic grips and any internal seals. The fit and finish is excellent with a great overall weight in the hand. The pistol grips is a lot like what you have with the Colt Single Action Army pistol but the Schofield No. 3 CO2 BB-Pellet Revolver is a lot more front end heavy because of its beefy barrel.
Realism: In terms of replicating a real steel Schofield No. 3 CO2 BB-Pellet Revolver for sure looks and feels that part. The reassessed barrel and well hidden CO2 screw don’t give anything away that the Airgun version is not the real deal. But as with all of these shell loading Airgun Revolvers, the shells are actually closer to a .380 Caliber in diameter rather than a 45 which is what the real steel Schofield No. 3 CO2 BB-Pellet Revolver would be designed for.
If you are like a bulky revolver with good weight to it then the Bear River Schofield No. 3 is it.
Can shoot Steel BB’s or Pellets since it comers with both shell types.
Recessed barrel.
Well concealed CO2.
Shell loading design that loads from the back so no need to remove shells if you wish not to.
Single Action Only hammer and trigger action feel good, nice and light with short take-up and release.
Fairly discreet safety location right behind the hammer so easy to get at.
Super easy to load, pellet shells can even be reloaded with shells in the gun if you are using the pellet shells.
Really like the Nickel Finish on this gun.
Can get simulated Ivory grips for it if you prefer that look.
Cons:
Sights are not adjustable.
Warning instructions on side of the frame.
Barrel is not rifled for pellet use?
Only a Single Action Only Hammer and Trigger but true to the style of the gun.
Comments:
Yet another classic shell loading CO2 BB Revolver, and again the more the merrier in my option! I like that you get 12 shells with our kit version, 6 removable shells for 4.5mm Steel BB’s and 6 removable shells for .177 caliber Pellets. The Schofield No. 3 CO2 BB-Pellet Revolver is for sure a hefty revolver but the pistol grip is not super large so even people with smaller hands should not have a problem shooting the Schofield No. 3 CO2 BB-Pellet Revolver. The real problem is deciding which Shell Loading Airgun Revolver to buy now since we have so many to choose from… Classic or modern, nickel or black, or perhaps weathered?
My Table Top Review for the Schofield No. 3 CO2 BB/Pellet Revolver:
