Umarex presented at SHOT Show this year a license I think we all thought was never going to happen! That would be Glock, for years Glock has been steadfast about not allowing their handguns to be licensed by anyone other than them. Glock has been very protective about their brand and intellectual properties as they are entitled to. I'm not sure what Umarex said to Glock but somehow they where able to get Glock to agree to letting Umarex license Glock pistols to be made into BB and Airsoft versions. The first BB and Airsoft models I was able to checkout at this years SHOT Show are pretty basic in design and are styled after the Glock 19.
The new Umarex Glock 19 licensed BB and Airsoft pistols are CO2 powered as expected but don't have blowback operation and have a fixed metal slide and a drop out stick magazine. The new Glock Licensed Umarex pistols do however look and feel really good, picking them up you would think you are holding a real steel Glock until you try and rack the slide or drop the magazine. Umarex did indicate there will be more licensed models coming out down the road with full blowback operation and full size drop out metal magazines, we just need to be patient as Glock is very particular about the quality control.
Another show stopper for me at the Umarex Booth was the Legends Cowboy Lever Action Shell loading BB Rifle. I love shooting my Red Ryder BB Rifle but I have to admit the Red Ryder kind of looks a bit like a kids beginner airgun. The new Umarex Legends Cowboy Lever Action Shell loading BB Rifle look, feels and operates like the real deal so it's not only going to be super fun to shoot but an awesome replica to own especially if your into the old west guns.
The Umarex Legends Cowboy Lever Action Shell loading BB Rifle uses two 12 gram CO2 cartridges and can hold 10 BB loaded shells in its tube styled magazine, working the lever action elects the empty shells. Umarex claims around 410 fps so the Umarex Legends Cowboy Lever Action Shell loading BB Rifle will be Canada legal without the need for a PAL. I thought the stock was real wood but was correct, it's actually made out of plastic, but I think just about anyone looking close up would have a hard time believing Umarex didn't use real wood.
Thanks to Mark Davis from Umarex for making himself available to interview!
I wanted to start my SHOT Show 2018 Interviews with Crosman because in my books they had one of the most exciting new products this year at SHOT Show, the Crosman Remington DPMS SBR which is a duel 12 gram CO2 powered 4.5mm steel BB firing AR styled semi and full auto Machine gun.
What I like about the Crosman Remington DPMS SBR is that it works a lot like an Airsoft Gas Blowback rifle with an internal bolt and buffer tube spring, working charging handle and dust cover, it even has a bolt release button. The Crosman Remington DPMS SBR can even be taken apart similarly to a real AR rifle.
The next new interesting product from Crosman, and as I found out the design is not entirely exclusive to Crosman, was the CO2 Non-Blowback Pellet firing 1911. The Crosman Pellet 1911 has an interesting magazine design, it looks like a traditional full size drop out magazine, which as you would expect holds the CO2 but rather than an inline BB magazine the new Crosman Pellet firing 1911 has two built in 6 shot rotary magazines that can be flipped so you essentially end up with a 12 shot magazine.
You will have to drop the full size magazine after the first 6 shots to flip the rotary magazines. The Crosman Pellet 1911 does not have blowback action but the double action only trigger is smooth and not too heavy. The slide is metal with a metal magazine and a polymer frame. The Crosman Pellet shooting 1911 comes in silver and black.
The next new product from Crosman was the Mako. The Crosman Mako is a Beretta styled CO2 Blowback BB pistol. The Crosman Mako features Blowback action, fiber optic sights, tactical grips, a double action trigger and a stick magazine that holds the 4.5mm steel BB's.
Thanks to Phillip Guadalupe from Crosman for allowing me the Interview!
So it begins, I have been to this years SHOT Show in Las Vegas and checked out the new products from Umarex, Crosman, Sig Sauer and ASG. I have taken video and Interviewed the main Airgun companies. Now it's time to report back to everyone what I saw and learned. To start with here is a Teaser Video with some scenes from Vegas, inside SHOT Show and of course some of the highlight products from each airgun company.
Type: Blowback Pellet & BB Pistol. Manufacturer: Distributed by Umarex. Model:SA10. Materials: Metal & Polymer. Weight: 2.05 pounds (930 grams). Barrel: Metal rifled. Propulsion: CO2 x 1. Action: Semi auto blowback, single & double action. Ammunition Type: .177 caliber pellets & 4.5mm BB's. Ammunition Capacity: 8x4 round rotary full size drop out metal magazine. FPS: Claimed 420.
Trigger Pull: The trigger pull on the Umarex SA10 CO2 Blowback Pellet and BB Pistol is similar to most of the rotary magazine styled pellet pistols. The blowback operation does cock the hammer allowing for a lighter single action styled trigger pull but the trigger pull length is still about the same as shooting in double action. There is less trigger pull weight when the hammer is back shooting in single action but the first part of the trigger pull is necessary in order to rotate the magazine.
Build Quality: The Umarex SA10 CO2 Blowback Pellet and BB Pistol feel great in the hand and has a nice weight and solid feel to it. Like most modern day pistols the Umarex SA10 CO2 Blowback Pellet and BB Pistol has a metal slide and polymer frame, you will also find a lot of internal metal parts along with a full size drop out metal magazine. Fit and finish are also very good.
Realism: The Umarex SA10 CO2 Blowback Pellet and BB Pistol is not a copy or replica of any actual real steel gun in production but to me it most resembles a Sig Sauer, not exactly as the Umarex SA10 CO2 Blowback Pellet and BB Pistol does incorporate its own design and style. You will find a lot of real gun attributes that make this gun look and feel the deal. Like it's blowback operation, full see drop out metal magazine, wide open recessed barrel and ability to be field stripped. Available From: The Replica Airguns Store.
Pros:
Great weight and feel to it, build quality seems good.
Accessory rail for adding a laser or tactical light.
Unique full size drop out metal magazine that holds extra rotary magazines on it for quick reloading.
Have the option of shooting Steel BB’s or pellets.
Has a rifled barrel.
Gold barrel looks good.
Barrel tip is removable allowing for possible mock suppressor or silencer.
Slide catch is actually a safety making it nice and discreet.
Can easily field strip the gun.
Warning instruction are not overpowering.
Cons:
No white or yellow dot sight on the front and they are non-adjustable.
Trigger safety is just for show.
Not really a replica but a great looking gun none the less.
Comments:
I have been waiting a while to get my hands on the Umarex SA10 CO2 Blowback Pellet and BB Pistol and now that I have it for review I can say it seems to be a really well put together CO2 Blowback Airgun. OF course I still need to get some shooting in with it till I make my final decision but so far I am liking what I am seeing. Generally prefer actual Replica Airguns but the Umarex SA10 CO2 Blowback Pellet and BB Pistol does have a really nice look and feel to it, I don't even mind the Gold barrel and I am usually not a big Gold Gun fan. The unique magazine design with its snap in rotary Pellet and BB magazines shoudl come in handy when it coms time for testing and the ability to shoot either Pellets or BB's does give the shooter more options.
Type:BB Pellet Pistol Manufacturer:Umarex Model:SA10 Material: Polymer frame with metal slide. Weight: 929.8 g (2.05 pounds). Power Source: 12 g CO2 x 1. Action: Single & Double action Ammo Type: 4.5mm steel BBs and /177 caliber Pellets. Ammo Capacity: 8 rounds. FPS: 420
I have been having a hard time getting my hands on the Umarex SA10 CO2 Blowback Pellet and BB Pistol to do a review for everyone. It's been a rather low stock item. We have had it in a couple of times but not in a lot of quantity and since the demand has been higher than the supply the Umarex SA10 CO2 Blowback Pellet and BB Pistol tends to be out of stock most of the time! Hopefully that changes in the future?
This YouTube video is a Preview video only for the Umarex SA10 CO2 Blowback Pellet and BB Pistol so I do not go over a lot, I sim,ply show you around the gun and take a look at the packaging and any info on the packaging. My Future Table Top Video Review will have a lot more details along with a full field strip of the Umarex SA10 CO2 Blowback Pellet and BB Pistol.
Here's what we know for now! The Umarex SA10 has a metal frame and polymer slide, it shoots both .177 caliber pellets and 4.5mm Steel BB's. The Umarex SA10 CO2 Blowback Pellet and BB Pistol has blowback action with a single and double action trigger and sports a full size drop out metal magazine that holds the CO2 and removable rotary 8 round magazines, 4 in total 1 ready for shooting and the other 3 on standby ready to be hot swapped. We should expect around 400 fps with lighter ammo and I am hoping for decent accuracy using pellets since the Umarex SA10 CO2 Blowback Pellet and BB Pistol does have a rifled steel barrel.
Type: Blowback Airsoft Pistol. Manufacturer: Distributed by Cybergun. Model:Taurus PT24/7 G2. Materials: Metal & Polymer. Weight: 1.86 pounds (844 grams). Barrel: Metal non-rifled. Propulsion: CO2 x 1. Action: Semi auto blowback, single action only. Ammunition Type: 6mm plastic Airsoft BB's. Ammunition Capacity: 19 round double stack full size metal magazine. FPS: Claimed 438 using .20 gram BB's.
Trigger Pull: The trigger pull on the Cybergun Taurus PT24/7 G2 Airsoft Pistol is Single Action Only and feels really good, it was much lighter than I expected and has a medium length take up, the reset positions the trigger fairly far back ready for quick follow-up shots. You'll also find a working trigger safety on this Airsoft Pistol which is a nice touch and ads to the realism.
Accuracy: At this point I have not shot the Cybergun Taurus PT24/7 G2 Airsoft Pistol, I imagine it should perform well considering it has an adjustable spin-up or hop-up along with a rear site that can be adjusted for windage. According to the manufacturers claimed fps, we should get around 438 fps using .20 gram Plastic Airsoft BB's. I will be a bit surprise if this Cybergun Taurus PT24/7 G2 Airsoft Pistol actually hits this rather high velocity but anything over 400 will be impressive.
Build Quality: Overall the Cybergun Taurus PT24/7 G2 Airsoft Pistol looks and feels really good. It has a nice weight to it but is not overly heavy. Everything feels tight and the finish looks great. the only thing I noticed that stood out a little bit was some flex in the forward part of the frame near the accessory rail. It seems to seperate just a little bit leaving a very slight gap and there is some flex here. I would not worry too much about this as it is not a structural consideration.
Realism: The Cybergun Taurus PT24/7 G2 Airsoft Pistol is a real ringer for the lead bullet firing version in almost every way and even has licensed trademarks on it through Cybergun but they are not exactly where you would find them on the real steel version, at least on the slide portion. Everything works like you would expect including full ambidextrous slide catch, safety, and magazine release. You can also easily field strip the Cybergun Taurus PT24/7 G2 Airsoft Pistol just like the real steel version. Available From: The Replica Airguns Store.
Pros:
Claimed to have a very high fps over 400 using .20 gram Airsoft BB’s.
Full length blowback action.
Supper accurate licensed Taurus PT24/7 G2 replica.
Excellent SAO trigger pull, very smooth and light.
Working trigger safety.
Double stack full size drop out metal magazine holds the CO2 and 19 BB’s.
Comes with additional back-straps in small medium and large sizes.
Adjustable rear sight for windage.
Fully ambidextrous controls.
Easily field strippable.
Red tip is easy to remove using boiling water to melt the glue.
Adjustable Bax hop-up.
Cons:
Comes with red tip installed and glued on.
Seems to have a little bit of frame flex in the rail area with a slight gap.
Safety selector is plastic.
Comments:
The most noticeable feature of the Cybergun Taurus PT24/7 G2 Airsoft Pistol is the claimed high FPS of 438 using .20 gram airsoft BB's. This seems kind of high for a full blowback Airsoft pistol but we will find out when I do my Filed Test Shooting Video Review for the Cybergun Taurus PT24/7 G2 Airsoft Pistol. Velocity aside the Cybergun Taurus PT24/7 G2 Airsoft Pistol is a very stylish gun, I have always been a Sig Sauer fan and it remind me a lot of the Sig brand but with a some more rounded finishing going on. The Cybergun Taurus PT24/7 G2 Airsoft Pistol has a lot going for it: Taurus Licensing, metal and polymer parts where you would expect them, fully ambidextrous working controls, adjustable rear sight for windage, adjustable hop-up, a working trigger safety, some power behind it and a full size double stack all metal magazine. It's also rather reasonably priced in our Replica Airguns Canada and US Online Store.
It was fun to shoot the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol for a change but really it was a lot like shooting one of my BB and Airsoft pistols, except in this case I was shooting .43 caliber rubber balls. I decided to not use paintballs inside my nice new Sea Can Indoor Airguns Shooting Range to keep things clean :)
First, I put three rounds through my Chrony Chronograph to see what the real world FPS would be, keep in mind I was using rubber balls rather than paintballs and the rubber balls are a little bit heavier than paintballs so this could bring the FPS down a bit compared to the lighter paintballs. Using a brand new CO2, the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol average 316 FPS which was high than the claimed 290 FPS!
Moving on to my accuracy testing, as per usual I positioned myself 30 feet back from my paper target and using a seated and rested shooting position I shot a full magazine (8 rounds) of rubber balls on target with the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol. I was not expecting anything close to what I would get with a BB or Airsoft pistol since Paintball guns are not known for super tight groups. I did manage to shoot around a 6 inch group with most of the shots staying within around 3 inches. This is about what I was expecting as paintball guns are not meant for "target practicing", generally you are going to be shooting human sized objects and hoping to get some well placed center mass shots. 3-6 inch accuracy at 30 feet will get the job done for sure. I did find the trigger using rubber balls did have a bit more friction while the inner barrel seated itself into the magazine. When shooting quickly it is much less noticeable.
I know some of you are going to ask about using the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol with rubber balls for non-lethal self defense and the reality is it will not stop a person who is persistent on hurting you. There is simply not enough stoping power here. Will it "sting like a bitch" if you get shot up close with one of these Umarex Walther PPQ M2 .43 Cal. Paintball Pistol? For sure but a well timed punch has more chance of dropping someone than a .43 caliber rubber ball moving at around 300 FPS. You may scare someone off simply by brandishing it but you take the chance of the person calling your bluff. Perhaps 8 rubber balls to the face will change their mind but that's a chance you have to figure out if you want to take or not.
As a paintball pistol, the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol is about the best I have seen in terms of replica paintball guns. It is as good as they come for realism, even better than many BB and Airsoft guns and in terms of performance it did not let me down either.
Wow, we had a great contest giveaway for the Umarex Ace in the Hole Single Action Army Revolver. We received 406 participants with close to 2000 separate entries, so thank you everyone that got involved. Unfortunately for the other 405 participants there can only be one winner and to see who that winner is you're going to have to watch my Contest Giveaway announcement video...
Type: Paintball Gun. Manufacturer:Umarex - T4E. Model:Walther PPQ M2. Materials: Metal & Polymer. Weight: 848 grams (1.87 pounds). Barrel: Smooth bore. Power Source: 1x12 gram CO2. Action: Semi-Automatic with blowback action. Ammo Type: .43 Caliber Paintball or Rubber Ball. Ammo Capacity: 9 Rounds. FPS: 290.
Trigger Pull: The trigger pull on Umarex Walther PPQ M2 .43 Cal. Paintball Pistol feels a lot like a double action trigger, internally it may be striker fired so expect a bit of a longer trigger pull with a fairly long reset and a medium strength trigger weight. There is also a working trigger safety which works well.
Build Quality: The build quality of the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol is really very good, metal parts are where you would expect them, the slide, slide catch, barrel, magazine and most internal parts giving the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol a nice near 2 pounds (1.87 pounds) of weight with the magazine in which makes the Paintball version a little heavier than the real still version (1.53 pounds) but once the real steal version is loaded with a full mag this may even out a bit. The Walther PPQ M2 does have a polymer frame but again this is normal with todays modern guns and helps keep the weigth down. Fit and finish is also excellent.
Realism: The Umarex Walther PPQ M2 .43 Cal. Paintball Pistol is a near perfect replica of the real steel Walther PPQ M2, form the fully licensed markings to the large .43 caliber diameter barrel. If you placed the Paintball version side by side with the real steel version I doubt you could tell them apart? You will find that the slide cycle distance is a bit shorter than it shoudl be meaning that when the side catch is engaged the slide does not go as far back as it should. Filed stopping the Walther PPQ M2 .43 Cal. Paintball Pistol may requires some tools.
Full Metal slide that locks back on the last shot.
All metal heavy full size drop out magazine adds some additional weigth to the gun.
Very Accurate Walther PPQ replica, almost indistinguishable from the real still version.
Everything works pretty much like the real gun so a great training tool.
Adjustable yellow dot sights.
Working trigger safety.
Fit and finish is excellent.
Magazine spring release really shoots the magazine out.
Love the .43 caliber barrel opening, adds to realism.
Cons:
Trigger pull seems a bit long as it shoots like a double action trigger, may be striker fired internally?
Magazine only holds 9 rounds, so you are going to need extras.
Blowback action is not full blowback, more like a typical BB airgun.
Comments:
I'm really glad to see another Replica Paintball Pistol available in Canada, especially such a well made and realistic version. The Umarex Walther PPQ M2 .43 Cal. Paintball Pistol looks to be perhaps the best to date .43 caliber Paintball gun on the market and may even prove to be an option for non-lethal personal defense when using rubber balls with it. Not that I would trust my life with it but it sure looks the part and I am sure most people would not want to be on the receiving end of 9 rounds coming at you. As a training tool and Paintball gun the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol offers superb realism for this purpose. I am looking forward to testing mine out shortly :)
Before I get into this Field Test Shooting Review for the Umarex Legends Ace in the Hole SAA Pellet Revolver I did want to mention again that we do have a Contest Giveaway going on till the end of this month where we will be giving away an Umarex Legends Ace in the Hole SAA Pellet Revolver to a Canada or US Winner. Sorry we can not ship outside of Canada or the US due to airgun and import regulations. Make sure to scroll to the bottom of this review to enter the contest.
Back to the Field Test Shooting Review! Rather than just testing the 3.5 inch barreled Umarex Legends Ace in the Hole SAA Pellet Revolver by itself, I also compare it to two other Umarex SAA Revolvers, in 5.5 and 7.5 inches version. I wanted to see how the barrel length effected power and accuracy and I was kind of surprised at the results.
I shot three rounds from each Umarex SAA Pellet Revolver through my Chrony Chronograph and averaged them out for each gun. Umarex claims the Umarex Legends Ace in the Hole SAA Pellet Revolver to get around 340 fps and it shot an average of 323fps with a brand new CO2 and using 8.2 gram lead pellets, not bad at all considering the pellet weight and colder temperature of around 15 degrees Celsius. next I shot the 5.5 inch Umarex SAA Pellet Revolver in the same manner and averaged 347fps which is kind of what I was expecting die to the anger barrel. SO when I came to the 7.5 inch Umarex SAA Pellet Revolver I was expecting even higher results but was surprised by my results which where exactly the same as the 3.5 inch version coming in at 323fps? Perhaps the valve was a bit detuned on the 7.5 inches version, I am not sure?
Moving on to the accuracy performance for the Umarex Legends Ace in the Hole SAA Pellet Revolver. Again I sued the same 8.2 grain RWS flathead pellets and emptied a full cylinder into my paper target positioned 30 feet downrange. My accuracy result for the Umarex Legends Ace in the Hole SAA Pellet Revolver where decent with my 6 shoot group getting around a 2 inches and well centered on the target, just a lad high but not by much. I am pretty sure I pulled one of the shots so I think I should of gotten closer to 1.5 inches. Next I Shot the 5.5 inch UmarexSAA Pellet Revolver but seemed to struggle a bit with it. I found the 5.5 inch Umarex SAA Pellet Revolver shot to the left and my 6 shot grouping was a lot more spread out exceeding 2 inches by a bit. Lastly I tested out the 7.5 inch Umarex SAA Pellet Revolver and it was the clear winner placing all 6 rounds wishing the black bullseye getting close to a 1 inch grouping. I love it when that happens :)
Let's start this review off by first stating that this is also a contest, I know it's been a while but I am happy to announce that we will be having way more regular contests for our viewers and subscribers! To kicking things off with this new contest trend we are giving away an Umarex SAA Ace in the Hole CO2 Pellet Revolver to one lucky either Canada or US winner. Sorry for legal and shipping reasons we have to stay within Canada and the US.
And we're gong high tech with this contest implementing Gleam to allow a number of ways for you to get involved and have more chance to win! Go to the bottom of this post to get involved!
So I guess I better include a written review here to :) We'll keep it short this time since I am sure we are all mostly interested in the contest!
Type:Pellet Revolver. Manufacturer:Umarex. Model:Ace in the Hole. Materials: Full Metal. Weight: 885 grams (1.95 pounds). Barrel: Rifled Power Source: CO2. Action: Semi-Automatic. Ammo Type: .177 Pellets. Ammo Capacity: 6 Rounds. FPS: 340 using lead pellets.
Pros:
Short barrel increases draw speed.
Thumb spur hammer primed for rapid fire.
Realistic heavy metal frame with weathered finish.
Authentic rotation cylinder with loading gate.
Interchangeable clip-op front sights.
Has good combination of accuracy and power for a short barreled revolver.
CO2 Allen Key built into pistol grip.
Cons:
Shells must be loaded one at a time but can be kept in the cylinder.
Plastic sights detract a bit from realism.
The Ace in the Hole has more than one trick up its sleeve. This CO2 pellet gun is an original take on the classic Single Action Army revolver. The oversized thumb spur allows you to fan the hammer with your palm, like a real gunslinger. Swap in the sight that works best for your aim, or remove it entirely and shoot from the hip.
Overall I found it to be one of my favorite of the Umarex SAA Colt Revilers. I like that it's a pellet shooter and the Umarex Ace in the Hole is even capable of shooting decent weight led pellets at close to the claimed fps. The size and weigth of this CO2 Revolver feel perfect coming in at almost 2 pounds in an all metal airgun.
The weathered finish with the Ace logo imbedded in the pistol grips looks really great, the only distraction from the realism would be the plastic removable front sights. I am not sure why Umarex did this but it will help in quick draw situations. Overall the Umarex Ace in the Hole is a super well built and ultra realistic SAA Revolver that will not disappoint any old west airgun collector. get your while we still have them.
I don't get many Gas Blowback Airsoft Rifles to review all that often so when I get my hands on them I sure have a great time testing them out and feeling the blowback action tapping me in the shoulder as I shoot in semi or full auto modes. Sure Gas Blowback Airsoft Guns don't perform like their AEG counterparts, especially when you're shooting in full auto. You can expect way less rounds in each magazine and even with less rounds the last 5 or 10 shots when shooting rapid fire are going to be compromised but I really don't care because a well made Gas Blowback Airsoft rifle like the KJWorks M4 CQB Carbine GBB is just so much more fun to shoot than an AEG and way more realistic.
So let's get on with my test results for the KJWorks M4 CQB Carbine GBB Airsoft Rifle... The fps consistency was really decent, super consistent when I spaced out my 5 test shots they averaged 377 fps, not really having any low or high fps shots out of the bunch. I did have a full gassed up mag and was using .20 gram plastic 6mm Airsoft BB's for this part of the field test.
Again shooting in semi auto mode, I placed 10 rounds into my paper target setup downrange 30 feet and as per usual I was using a rested shooting setup sitting on a stool and resting the KJWorks M4 CQB Carbine GBB Airsoft Rifle on a sandbag up front. 9 out of the 10 rounds all grouped in about a 3/4 inch group with only 1 round coming outside a bit stretching the 10 shot grouping out to about 1.5 inches. Still really great for a Gas Blowback or any Airsoft rifle for that matter!
Next I shot the rest of the mag in full auto burst mode which was about 20 rounds left in the KJWorks M4 CQB Carbine GBB Airsoft Rifle at this point. As expected the KJWorks M4 CQB Carbine GBB Airsoft Rifle cooled down pretty quick and the last 5 rounds did fire just fine but there was a noticeable drop in power making the rounds shoot low on the target. Keep in mind I was shooting in a not too warm environment, about 15 degrees which is not bad but also not that warm.
I would have liked to have seen the KJWorks M4 CQB Carbine GBB Airsoft Rifle perform as consistently in full auto mode as it did in semi auto but that would have been asking a bit too much from a Gas Blowback Airsoft rifle. The KJWorks M4 CQB Carbine GBB Airsoft Rifle is a really well put together Airsoft Rifle that didn't let me down in the end.
Getting back to the Umarex IWI Tavor 21 Elite AEG Airsoft Rifle, how did it perform? I placed 5 rounds through my Chrony Chronograph using .20 gram plastic Airsoft BB's and it shot a pretty quick 425 fps! Not sure if I would want to use the Umarex IWI Tavor 21 Elite AEG Airsoft Rifle in any close quarters games with that velocity but it would perform well on a field and even get a round out to a nice distance.
Next I tested out the accuracy of the Umarex IWI Tavor 21 Elite AEG Airsoft Rifle as best I could in my kind of "cramped for rifles" indoor Sea Can Airguns Range. I place my paper target 30 feet down range and put 10 rounds in semi auto into the target shooting from a rested seated position with a sandbag up front for stability. The Umarex IWI Tavor 21 Elite AEG Airsoft Rifle shot a nice tight 1.5 inch grouping just a tad low and to the left but pretty close to the bulls-eye for being straight out of the box with no adjustments on my part.
In full auto mode the Umarex IWI Tavor 21 Elite AEG Airsoft Rifle performedas expected emptying the magazine making a clean 3 inch hole in my paper target with only a few of the 6mm Airsoft BB's venturing outside of it.
All in all the Umarex IWI Tavor 21 Elite AEG Airsoft Rifle is a nice performer with a good solid build quality and modern Bull-pup design. I really liked the pop-up sights and the fact that can use any standard AEG AR/M4 High capacity magazine with it.
In this yet another AEG Airsoft Field Test Shooting Video Review I mainly focus on the Cybergun Famas AEG Bullpup Airsoft Rifle and put it through my typical velocity and accuracy tests I conduct in the Replica Airguns Indoor Sea Can Shooting Range. I also show some other similar Bullpup styled AEG Airsoft Rifles in comparison that I plan on also reviewing very soon, the IWI Tavor 21 Elite Force and two AEG Bullpups from ASG, the Steyr Aug A2 and Steyr Aug A3 Proline Series..
So how did the Cybergun Famas AEG Bullpup Airsoft Rifle perform? I placed 5 rounds through my Chrony Chronograph using .20 gram plastic Airsoft BB's and I got right around a 360 fps average which is should be just about right for most indoor or outdoor shooting environments. Velocity consistency was also good.
Moving on to the accuracy portion of my indoor sea can field test, I place my paper target 30 feet down range and put 10 rounds into the target shooting from a rested seated position with a sandbag up front for stability. The Cybergun Famas AEG Bullpup Airsoft Rifle shot a nice 1.5 to 2 inch grouping just a little high but well centered. The front and back sigh are both adjustable making windage and elevation corrections very easy to do. You could also play around with the hop-up to adjust elevation at various ranges.
In full auto mode the Cybergun Famas AEG Bullpup Airsoft Rifle performed really well, I pretty much empty the magazine and the grouping only spread out to about 3 inches making a clean 3 inch hole in my paper target. There is something very gratifying about unloading an entree magazine in full auto and checking out the damage it caused :)
All in all the Cybergun Famas AEG Bullpup Airsoft Rifle is a great performer at a pretty low price tag of around $200 Canadian at the time of this review. If you want a slightly higher quality version than also checkout the Cybergun Famas F1 EVO Version which is only about $90 more and but offers better build material and and internals improvements.
In this Field Test Shooting Video Review I mainly focus on the ASG CAA M4 Sportline AEG Airsoft Rifle and put it through my typical velocity and accuracy tests I conduct in the Replica Airguns Sea Can Shooting Range. I do compare the ASG CAA M4 Proline AEG Airsoft Rifle to the ASG CAA M4 Sportline version since they look virtually identical but do have some notable differences, like the build materials and much lower cost for the ASG CAA M4 Sportline AEG Airsoft Rifle. That said both ASG CAA M4 AEG Airsoft Rifles did perform very similarly other than a bit of a velocity bump with the ASG CAA M4 Proline model over the Sportline I test in this video.
So how did the ASG CAA M4 Sportline AEG Airsoft Rifle perform? I placed 5 rounds through my Chrony Chronograph using .20 gram plastic Airsoft BB's and I got a 335 average fps which is a bit lower than the ASG CAA M4 Proline AEG Airsoft Rifle but still great for a variety of Airsoft shooting situations. I did notice that the FPS seemed to be creeping up slowly as I tested it, maybe some break in was taking place?
Moving on to the accuracy portion of my indoor field test, I place my paper target 30 feet down range and put 10 rounds into the target shooting from a rested seated position with a sandbag up front. The ASG CAA M4 Sportline AEG Airsoft Rifle shot a nice 1.5 to 2 inch grouping a little to the right of the bulls-eye and slightly low, which I can easily correct using the adjustable sights and hop-up adjustments. I like to conduct my field tests with all the guns right out of the box and with no adjustments prior to my testing since that's the way you're going to get them and you may have to also make some small correction to the sights and or hop-up adjustments.
In full auto mode the ASG CAA M4 Sportline AEG Airsoft Rifle didn't miss a beat. I emptied what was left of the mag (About 130 rounds or so) in no time with a few quick bursts making a nice mess of the paper target which is the result I'm looking for in full auto mode :)
In this Field Test Shooting Video Review I mainly focus on the ASG CAA M4 Proline AEG Airsoft Rifle and put it through my typical velocity and accuracy tests I conduct in the Replica Airguns Sea Can Shooting Range. I do compare the ASG CAA M4 Proline AEG Airsoft Rifle to the ASG CAA M4 Sportline version since they look virtually identical but do have some notable differences, like the build materials and perhaps a few internal upgrades found in the Proline version. That said both ASG CAA M4 AEG Airsoft Rifles did perform rather similarly other than a bit of a velocity bump with the ASG CAA M4 Proline model.
So how did the ASG CAA M4 Proline AEG Airsoft Rifle perform? I placed 5 rounds through my Chrony Chronograph using .20 gram plastic Airsoft BB's and I got a very respectable 392 average fps with most of the five shots actually getting 392 fps so very consistent velocity for sure.
Moving on to the accuracy portion of my indoor field test, I place my paper target 30 feet down range and put 10 rounds into the target shooting from a rested seated position with a sandbag up front. The ASG CAA M4 Proline AEG Airsoft Rifle shot a tight 1.5 inch grouping just to the right of the bullseye which I can easily correct using the adjustable sights. I like to conduct my field tests with all the guns right out of the box and with no adjustments prior to my testing since that's the way you're going to get them and you may have to also make some small correction to the sights and or hop-up adjustments.
In full auto mode the ASG CAA M4 Proline AEG Airsoft Rifle didn't miss a beat. I emptied what was left of the mag (About 200 rounds or so) in no time at all and made a nice mess of the paper target which is what I am usually going for :)
All in all the ASG CAA M4 Proline AEG Airsoft Rifle is a very high quality Airsoft gun but does come at a premium pricetag. If you're budget is a bit lower than checkout my upcoming Field Test Shooting Video of the more economical ASG CAA M4 Sportily AEG Airsoft Rifle which will be out this week.
This was the first time shooting a blank gun in the new Sea Can and I can tell you it was pretty loud inside but of course I was wearing ear protection! In this Blank Gun Shooting video I test out the ARAL Model 1453 and 622K 9mm PAK Blank Guns and put 3 rounds through each of them.
Not everything went as planned. First off my high speed slow motion camera decided to not work :( and secondly I had some technical issues with both guns, well sort of...
Since the manual for the ARAL Model 1453 does not cover what I believed to be a safety on the back of the slide, I had no idea and was surprised to find out that rather than a safety, this selector switch is actually a semi and full auto selector which is kind cool but not so much when you're not expecting your blank gun to be shooting in semi auto :) Keep in mind this semi-full auto switch is only on the all black ARAL Model 1453 and not the two tone version.
Moving on to the ARAL Model 622K 9mm PAK Blank, I have a feeling that perhaps a different brand of ammo may have worked better in it. The 9mm PAK Blanks I used worked OK but I did get a failure to eject and the last round seemed to also not eject properly probably because there was no bullet in the mag too help direct it out of the breach area.
Type: Airsoft AR, M4, M16 Styled Rifle. Manufacturer:G&G. Model:ARP-556 and ARP-9. Materials: Metal and plastic/polymer construction. Weight: (ARP-9 4.4 pounds) (ARP-556 5.3 pounds). Barrel: 6 inches, metal non-rifled. Propulsion: AEG non-blowback. Action: Semi & full auto SAO. Ammunition Type: 6mm plastic Airsoft BB's. Ammunition Capacity: (ARP-9 300) (ARP-556 450). FPS: 400+.
Trigger Pull: The trigger pull on the G&G ARP rifles is an electric mechanical trigger that simulates a single action only trigger. There is essentially a light spring internally which supplies the trigger pressure. Pressure is even and smooth.
Build Quality: As with all of the G&G product line the G&G ARP-556 and ARP-9 AEG Airsoft CQB Rifles are really well made. Fit and finish is flawless and I had no issues shooting these guns at all. Every engagement of the trigger resulted in an Airsoft BB downrange and in full auto mode BB's where literally streaming from the barrel :) You will find a little more metal specifically in the receiver for the G&G ARP-556 over the G&G ARP-9 AEG Airsoft CQB Rifle which does make the ARP-556 a little bit heavier but not by much.
Realism: Both the G&G ARP-556 and ARP-9 AEG Airsoft CQB Rifles are super realistic, they are based on the AR, M4, M16 Rifle design but are scaled down for tactical close quarters use with their compact barrels and adjustable stocks. Most parts work as you would find on a real steel M4 like the charging handle, dust cover, simulated forward assist and of course the magazine releases. There is however no blowback operation but I can attest that if you have an 11.2 volt battery and are shooting in full auto you will feel this gun a rock'n.
2 lower and higher priced models with similar looks and performance to choose from.
Super compact CQB rifles.
Fully adjustable pop-up iron sights front and back.
Crown flash hider acts as a sound amplifier if you’re into that sort of thing?
Great internals, Internally upgraded with an ETU and MOSFET system.
Skeltonized PDW stock perfect for close quarters combat.
Nice 400 feet per second velocity, good for close and even further out ranges.
Very accurate, one of the best Airsoft rifles tested to date.
ARP-526 has an ambidextrous selector / safety switch.
ARP-556 has full metal receiver.
ARP-9 is a bit lighter and less tiring to carry, great if you plan to add on a bunch of accessories.
Cons:
No blowback operation.
ARP-9 has a plastic receiver.
You need some pretty compact batteries to fit into the short bumper tube.
Comments:
I am going to go on the record and say that the G&G ARP-556 and ARP-9 AEG Airsoft CQB Rifles would be my go to Airsoft battle rifle of choice. They have enough power for out door shooting and not too much for indoor shooting. Their compact and lightweight design will make them super easy to carry around all day and quick to place on any target in a hurry. Accuracy is not a concern since these AEG Airsoft Rifles can cut a bullseye out of a paper target no problem. Price for what you get, quality, looks. performance are all top notch with either choice of G&G ARP-556 or ARP-9 AEG Airsoft CQB Rifle you decide to go with.
My Vimeo Video Review for the G&G ARP-556 and ARP-9 AEG Airsoft CQB Rifles:
What do yo know, a new Blank Gun Review! It's been a while since I actually saw some new Blank Guns other than our ROHM selection that made it past our wonderful Canada Customs.
But still it's nice to hold a new Blank Gun in my hands even if it's not the best quality. The two ARAL blank guns I take a look at in this Table Top Video Review are the ARAL Model 1453 and ARAL 622K 9mm PAK versions. Both are front venting and both have double stack 14 round magazines. They also have threaded inner barrels however no flare adaptor came with either on of them and I only got an included manual with the ARAL Model 1453.
In terms of what exactly real steel guns do they look like or resemble? The ARAL Model 1453 is kind of like a big chunky and somewhat ugly looking Glock. I have nick named mine the RoboGlock :)
The ARAL 622K resembles a CZ 75 but it's a fair bit smaller in size and much shorter. The finish on my ARAL 622K is really bad, it looks like someone took a can of spray paint and painted it themselves. But still they are working blank guns, well let's hope so when I test them out in my upcoming Field Test Shooting video... Fingers crossed!
It's been a rather long time since I made an Airsoft Rifle Field Shooting Test video. I like to shoot a bit further out than 30 feet when using a rifle. Unfortunately the weather outside is getting really cold where I live so my testing will have to all be done inside the Replica Airguns Sea Can Airgun Range which only allows for about 30 feet worth of distance to my paper target. I figure if I can get a tight group at 30 feet than it shouldn't spread out too much at longer ranges!
Since the G&G ARP-9 and G&G ARP-556 have identical internals and similar barrel lengths I figured I only really needed to test one of them out so I picked the G&G ARP-556 AEG Airsoft CQB and put 5 shots through my Chrony Chronograph to get my Field Test Started. The G&G ARP-556 AEG Airsoft CQB shot a nice consistent 400 fps which is as high as I would want to go for indoor CQB type shooting. The BB's sure did get to my paper target quickly!
I followed my velocity testing with an accuracy test at 30 feet back using a rested shooting position, sand bag up front and sitting in the back. I first placed 10 rounds on my paper target in semi-auto and hit the 1.5 inch bullseye with every shot! I think this may have been a first for me using an Airsoft rifle? Of course I had to switch the G&G ARP-556 AEG Airsoft CQB over to full auto and see how she would perform. Since I was using an 11.2 volt bolt battery the rate of fire was crazy fast but even so in full-auto the bulk of the shots still hit the center bullseye cutting out a 2 inch hole in my paper target. The G&G ARP-556 AEG Airsoft CQB is a beast that I would not want to be on the receiving end of!
I'm pretty sure I found my go to AEG M4 styled CQB rifle, I'm not sure how you could beat the results I got shooting the G&G ARP-556 AEG Airsoft CQB. And if you're looking for a slightly lighter and less expensive version with the same performance then take a look at the G&G ARP-9 AEG Airsoft CQB.
