Entries in Paintball,Rifle

Umarex T4E HDS Double Barrel CO2 Paintball Shotgun Field Test Review

1 Comment

I don’t do a lot of paintball gun reviews, they just don’t come across my table all that often so it’s a lot fo fun when I do get the chance to shoot some beefier caliber ammunition in the Replica Airguns Sea Can Indoor Airgun Shooting Range. Of course I use rubber ball ammo rather than standard paintball rounds in order to keep the mess to a minimum.

I have not done my Table Top YouTube Video Review yet for the Umarex T4E HDS Double Barrel CO2 Paintball Shotgun but you can checkout a Preview Video for now. In Summary the Umarex T4E HDS Double Barrel CO2 Paintball Shotgun is a pretty much exactly what the name says. It’s basically a sawn off pistol grip styled double barrel shotgun that uses CO2 and shoots .68 caliber paintballs. You have a selector for shooting either out of the left or right barrel or if you want to can even both at the same time but this really slows down the fps so I would not advise it with the 200 fps version that I was testing with.

Now on to the actual testing of the Umarex T4E HDS Double Barrel CO2 Paintball Shotgun! As alway I like to find out how close to the factory claimed fps I will get. Umarex claims around 200 fps for this version which is around 7.5 Joules of energy, apparently there is a 16 Joules version that shoots closer to 300 fps but we do not carry it at least right now. I put a couple fo rounds through my Umarex T4E HDS Double Barrel CO2 Paintball Shotgun using rubber ball paintballs which will be a little bit heavier than a standard paintballs and my first shot yielded 180 fps, my second shot was slightly higher at 184 fps so pretty close to the claimed 200 fps and that was in not the warmest of environments since the temperature in the Replica Airguns Sea Can Indoor Airgun Shooting Range was only 16 Degrees Celsius (60 Degrees Fahrenheit).

Next up it was time to see how the Umarex T4E HDS Double Barrel CO2 Paintball Shotgun performed shooting at a target setup 30 feet away. Since there are no actual sights on the Umarex T4E HDS Double Barrel CO2 Paintball Shotgun I had to kind eyeball it and as I shot it more and more I was able to get my shots closer to the center of the target. The Umarex T4E HDS Double Barrel CO2 Paintball Shotgun is not a tac driver but at 30 feet out you should be able to hit an 8-10 inch target pretty consistently. I don’t recommend using the double shot option since the same amount of CO2 is applied to both rounds that would normally be applied to one round decreasing the fps by about half making the paintball rounds shoot a lot slower and not really being that effective. This may be an option with the higher 300 fps version of the Umarex T4E HDS Double Barrel CO2 Paintball Shotgun.

So all in all I had a lot of fun shooting the Umarex T4E HDS Double Barrel CO2 Paintball Shotgun, it’s kind of like a big boy Nerf Gun that you can take onto the paintball field if you wanted to. For home defense I think it is a bit underpowered but there may be a little bit of shock factor that could slow someone down or deter them enough to either give you time get away or take shelter somewhere safe. Maybe using the pepper rounds would work OK in this situation? Either way the Umarex T4E HDS Double Barrel CO2 Paintball Shotgun is a really cool and unique CO2 Airgun that is not overly expensive and a welcome addition to any Airgun enthusiasts collection.

Categories: .68 cal, CO2, Field Test, Paintball, Review, YouTube Video, Pistol Tags: Umarex, T4E HDS

Umarex T4E HDS Paintball Shotgun and Diana Bandit - Chaser Pellet Pistol Unboxing

No Comments

In this Unboxing Preview video you really can’t get too much different in terms of product types. First up I showcase the Umarex T4E HDS Double Barrel .68 caliber CO2 Paintball Shotgun. I then take a look at the Diana Bandit PCP and Diana Chaser CO2 Bolt Action Match Grade .177 Caliber Pellet Pistols.

The Umarex T4E HDS Double Barrel .68 caliber CO2 Paintball Shotgun is a two shot short barrelled that could come in handy for CQB engagements but it looks to be designed also as a none lethal home defence weapon since you can load a CO2 without piercing it but when in a bind you simply hit the CO2 screw and it pierces the CO2 activating the gun for instant use. I will have to test this one out to see if it really has enough power to stop an intrude, after all you only get two shots so they better count!

And then we have two Diana Match Grade CO2 Bolt Action Pellet Pistols, both has a similar bolt, sights, barrel and trigger setup but with the Diana Bandit you get a wooden grips, an included 10 shot rotary magazine and it’s PCP powered so you will need a compressor or a pump to use it. The Diana Chaser on the other hand is CO2 powered, has a plastic pistol grip and does not include the 10 shot rotary magazine but you can buy it later on if you get bored loading one round at a time into the breach. I expect both of these pistols to be tack drivers!

The Umarex T4E HDS Double Barrel .68 caliber CO2 Paintball Shotgun is available in both our Canada and US Online Replica Airgun Store while Both Diana Pellet Pistols can only be found in our Canada Store.

Categories: .68 cal, 4.5mm / .177 cal, CO2, Paintball, PCP, Pellet, Pistol, Review, Rifle, Single Shot, YouTube Video Tags: Umarex, T4E HDS, Diana, Bandit, Chaser

2019 Replica Airguns Halloween Contest Giveaway

No Comments

There are two parts to they video, the Halloween Costume Contest and what’s going on next week so make sure to watch it all…

Part 1 - 2019 Replica Airguns Halloween Contest Giveaway

Contest Rules:

  • Must be 18+ to receive a prize.

  • Canada & US winners only.

  • Halloween Costumes must have a weapon of some sort in them.

  • Must post a Halloween costume video to your YouTube channel.

  • Your video must be named "2019 Replica Airguns Halloween Contest Giveaway".

  • November 9th is the deadline date for you to get your video in.

  • Must post a comment in this video letting me know you have a video for me.

  • Must be a subscriber to the Replica Airguns channel.

  • Must like this video

1st, 2nd and 3rd Prizes Awarded:

What’s going on next week?

I will be away competing in a Body Building Fitness Contest so there will not be any more videos that week.

You may have noticed I have been withering away this past couple of months. This is in preparation for a Fitness Contest I am going into. For a show like this you need to be super lean to be competitive.

I have been competing since 2015 mainly in Men’s Physique and have qualified myself over the years to compete at the National level in Amateur Body Building.

The competition I am going to is the GNC / ALLMAX Canadian National Pro Qualifier in Toronto. If I do really well I can possibly get an IFBB Pro Card. Getting an IFBB Pro Card means I would now be able to compete in Pro Body Building competitions.

In order to win the Pro Card I would need to win my hight class and then win the overalls against the other winners in their hight class.

To date I have come close to winning the IFFB Pro Card but just missed it on two occasions. I am hoping to get the IFBB Pro Card this times around but I know the competition will be very competitive.

Categories: 4.5mm / .177 cal, 6mm, Airsoft, BB, Blowback, CO2, Full Auto, Replica Airguns News, Semi Auto, Pistol, Rifle, YouTube Video Tags: Crosman, Bushmaster MPW, KWC, Taurus PT24 24/7, Umarex, Makarov PM, Makarov

Tokyo Marui New Product Preview Unboxing Video

No Comments

TokyoMaruiLogo.jpg

I though I would feature the fact that we recently added some of the Tokyo Marui product line to our Canada Replica Airguns Store. Tokyo Marui is said to be one of the best Airsoft products on the market and they have been around for a while so they have had time to get it right! As Tokyo Marui is a Japanese based company they are restricted to only being able to use plastic frames and slides but even with this limitation the Tokyo Marui products that I have personally looked at are extremely well made.

In this Tokyo Marui New Product Preview Unboxing Video I take a look at 4 Tokyo Marui models; the Tokyo Marui Strike Warrior .45 1911 Gas Blowback Airsoft Pistol, the Tokyo Marui Hi-Capa 5.1 D.O.R (Direct Optics Ready) GBB Airsoft Pistol, the Tokyo Marui FNX-45 Tactical Gas Blowback Airsoft Pistol and lastly the Tokyo Marui VSR-10 Pro Sniper Bolt Action Airsoft Rifle.

Tokyo Marui Strike Warrior .45 1911 Gas Blowback Airsoft Pistol

  • Type: Airsoft Pistol

  • Manufacturer: Tokyo Marui

  • Model: Strike Warrior .45

  • Materials: ABS

  • Weight: 816 g (1.8 lb)

  • Length: 205 mm (8.1 in)

  • Barrel: 74 mm (2.9 in), metal

  • Power Source: Green Gas

  • Action: Semi-automatic, blowback

  • Ammo Type: 6mm airsoft BBs

  • Ammo Capacity: 28 rounds

  • FPS: 366

Tokyo Marui Hi-Capa 5.1 D.O.R (Direct Optics Ready) GBB Airsoft Pistol

  • Type: Airsoft Pistol

  • Manufacturer: Tokyo Marui

  • Model: Hi-Capa 5.1 D.O.R.

  • Materials: Polymer and metal

  • Weight: 839 g (1.85 lb)

  • Length: 220 mm (8.7 in)

  • Barrel: 112 mm (4.4 in), metal

  • Power Source: Green Gas

  • Action: Semi-automatic, blowback

  • Ammo Type: 6mm airsoft BBs

  • Ammo Capacity: 31 rounds

  • FPS: 366

Tokyo Marui FNX-45 Tactical Gas Blowback Airsoft Pistol

  • Type: Airsoft Pistol

  • Manufacturer: Tokyo Marui

  • Model: FNX-45 Tactical

  • Materials: ABS

  • Weight: 830 g (1.8 lb)

  • Length: 220 mm (8.7 in)

  • Barrel: 113 mm (4.4 in)

  • Power Source: Green Gas

  • Action: Semi-automatic, blowback, single/double-action

  • Ammo Type: 6mm airsoft BBs

  • Ammo Capacity: 29 rounds

  • FPS: 366

Tokyo Marui VSR-10 Pro Sniper Bolt Action Airsoft Rifle

  • Type: Airsoft Rifle

  • Manufacturer: Tokyo Marui

  • Model: VSR-10 Pro Sniper vers.

  • Materials: ABS

  • Weight: 1.9 kg (4.2 lb)

  • Length: 107.5 cm (42.3 in)

  • Barrel: 430 mm (17 in)

  • Power Source: Spring

  • Action: Bolt action

  • Ammo Type: 6mm airsoft BBs

  • Ammo Capacity: 30 rounds

  • FPS: 366

Categories: 6mm, Airsoft, Blowback, Comparison, GBB, Gas, Pistol, Review, Replica Airguns News, Rifle, Semi Auto, Spring Piston, YouTube Video Tags: Tokyo Marui, VSR-10 Pro, FNX-45 Tactical, Hi-Capa 5.1 D.O.R., Strike Warrior .45

Umarex T4E HK 416 Training Marker CO2 Paintball Rifle Field Test Review

No Comments

If you have not already watched my Table Top Video Review for the Umarex T4E HK 416 Training Marker CO2 Paintball Rifle than make sure to do so if you are interested in more specifications and details.

I don’t often make many Paintball Review Gun Videos let alone Shooting Videos so this one is a bit different than the norm. Lucky for me I have some .43 caliber Rubber Paintballs that I can use in my Indoor Sea Can Shooting Range so as not to make a mess of things. As per usual I like to use a brand new 12 Gram CO2 Cartridge for my testing and for your reference the temperature was right around room temperature or 21 degree Celsius, 69 degrees Fahrenheit.

First up I generally perform my Chronograph test to see what the real world velocity or fps is for the Umarex T4E HK 416 Training Marker CO2 Paintball Rifle. I shot a short string of rubber rounds through my Chronograph and was able to get a 280 fps average with the Umarex T4E HK 416 Training Marker CO2 Paintball Rifle. This is plenty enough power for the intended target down range to feel the paintball effect without causing too much trauma.

With the remaining 10 rounds in my Umarex T4E HK 416 Training Marker CO2 Paintball Rifle magazine, I then setup a brand new paper target 30 feet down range and using a rested and seated shooting position and carefully unloaded the Umarex T4E HK 416 Training Marker CO2 Paintball Rifle into the target. I was a bit surprised to see the rounds spread out a fair amount perhaps as much as 10-12 inches but at least half where in the target rings.

I would not recommend the Umarex T4E HK 416 Training Marker CO2 Paintball Rifle as a long range paintball marker but it would be perfect for close quarters ultra realistic simulations. I would like to give actual .43 caliber paintballs a try outside to see if accuracy would be better, maybe the rubber balls grip the barrel a bit too much causing some random and unexpected spinning to occur? Either way the Umarex T4E HK 416 Training Marker CO2 Paintball Rifle is a really unique and fun Paintball Gun to shoot, maybe not for everyone but if you want the most realistic Paintball Marker then it would be a great option.

Categories: .43 cal, Blowback, CO2, Field Test, Paintball, Review, Rifle, Semi Auto, YouTube Video Tags: Umarex, T4E HK416

Umarex T4E T4E HK 416 Training Marker CO2 Paintball Rifle Table Top Review

No Comments

Type: Paintball Rifle.
Manufacturer: Umarex - T4E.
Model: H&K 416.
Materials: Metal & Polymer.
Weight: 3016 grams (6.65 pounds).
Barrel: Metal smooth bore.
Power Source: 1x12 gram CO2.
Action: Semi-Automatic with internal working bolt blowback action.
Ammo Type: .43 Caliber Paintball or Rubber Ball.
Ammo Capacity: 14 Rounds.
FPS: 330-460?

Trigger Pull: The trigger pull on Umarex T4E T4E HK 416 Training Marker CO2 Paintball Rifle is pretty typical of what you would find on an AR styled rifle. Since the internal bolt cycles with each shot, the trigger is engaged and the Paintball rifle is ready for the next shot with a very light and short single action trigger pull.

Accuracy: So far I have not had the opportunity to test the Umarex T4E T4E HK 416 Training Marker CO2 Paintball Rifle other than placing a few rounds down range into my ammo trap to see how it shot and felt. Without actually shooting rounds through the Chronograph I don’t really know what the fps velocity is going to be but I can say it felt like it was shooting perhaps even over 400 fps? Out of the box the Umarex T4E T4E HK 416 Training Marker CO2 Paintball Rifle was shooting rather low but you can adjust the rear sight for windage and elevation.

Build Quality: The build quality of the Umarex T4E T4E HK 416 Training Marker CO2 Paintball Rifle is very good since this Paintball gun is made for military and law enforcement training use. You’re going to find high quality metal and polymer where you would normally find them on the real steel version. The bolt carrier is expected to last at least 3000 shots but you do get an extra one included with it.

Realism: The fully licensed Umarex T4E T4E HK 416 Training Marker CO2 Paintball Rifle is about as realistic as you are going to get in a Paintball Rifle. It’s basically made very similar to a GBB Airsoft Rifle of the same type with a working bolt and pretty much all working parts on it. You can even break the Umarex T4E T4E HK 416 Training Marker CO2 Paintball Rifle down into the lower and upper receiver halves. The bolt blowback action is not super strong but this may be a good thing since CO2 usage will be more efficient allowing for higher fps and more shots per CO2.

Purchase it from the Canada Replica Airguns Store or the US Replica Airguns Store

Pros:

  • Seem to have decent fps, will see when I do my Field Test?

  • Full Size drop out magazine that holds 14 .43 caliber Paintballs and the CO2.

  • Removable 4 position adjustable stock.

  • Removable and adjustable iron sights.

  • Lots of rials for adding accessories.

  • Fully licensed H&K 4116 replica via Umarex.

  • Blowback does give a bit of recoil feedback and allow for a true single action trigger.

  • Very high quality metaled polymer build.

  • Used as a training weapon for military and law enforcement.

  • Comes with extra bolt carrier.

Cons:

  • Very expensive, well over $1000!!

  • Comes with blue hardware but can be swapped out (Pistol grip, But stock, Magazine).

  • Bolt carrier may wear out at around 3000 rounds.

Comments:

If’ you’re looking for the ultimate in Paintball Rifle realism the Umarex T4E T4E HK 416 Training Marker CO2 Paintball Rifle is going to meet that requirement for sure. It will come at a pretty decent cost but you are going to have a very unique Airgun that not many people will own. And as they say you do get what you pay for which is realism, quality and reliability. I look forward to testing out the Umarex T4E T4E HK 416 Training Marker CO2 Paintball Rifle on the Chronograph using some rubber ball ammo, I may even take it outside for some paintball ammo shooting, we will have to see…

Categories: .43 cal, Blowback, CO2, Paintball, Review, Rifle, Semi Auto, YouTube Video Tags: T4E HK416, Umarex

Air Venturi Springfield Armory M1 Carbine CO2 BB Rifle Field Test Review

1 Comment

Lots of CO2 BB Rifles getting reviewed these days and that’s kind of awesome, I remember a few years back and we barely had any realistic Replica BB rifles available to us. Now we have an ever increasing list of choices from Historical to Modern.

Todays Field Test Shooting Video focusses on the Air Venturi Springfield Armory M1 Carbine CO2 BB Rifle, I have not done my Table Top Video yet for it but I did make a preview video where I show it around a bit and talk about some basic specs. In short the Air Venturi Springfield Armory M1 Carbine CO2 BB Rifle is a CO2 powered semi auto 4.5mm Steel BB firing replica of the Springfield Armory M1 Carbine. It holds the CO2 and 15 rounds of Steel BB’s in its full size drop out metal magazine. Available with a plastic or upgraded wood stock.

For the Field Test Shooting part of this review I tested out the power and accuracy of the Air Venturi Springfield Armory M1 Carbine CO2 BB Rifle by first shooting 5 rounds through my Chronograph to establish the Feet Per Second velocity. I then placed a fresh paper target 30 feet downrange, while using a rested and seated shooting position I fired off 10 rounds into the target to see how tight of a group I can get with the Air Venturi Springfield Armory M1 Carbine CO2 BB Rifle. I used a brand new CO2 along with 5.1 grain 4.5mm Zinc coated Steel BB’s. The temperature was a conservative 22 degrees Celsius or 71 degrees Fahrenheit.

During my Chronograph velocity test I was a bit surprised to only obtain an average of 335 fps from the Air Venturi Springfield Armory M1 Carbine CO2 BB Rifle. Air Venturi claims closer to 425 so I am not sure why it was nearly 100 fps lower than claimed but perhaps the CO2 did not pierce as well as it could have, that said 335 fps does get the job done when shooting targets 20-30 feet away.

In terms of accuracy I was very pleased with the Air Venturi Springfield Armory M1 Carbine CO2 BB Rifle, it kind of made up for the slower than expected feet per second by getting a sub 1 inch 10 round group and I am not a big fan of peep sights so I was really not expecting these results. Right out of the box the Air Venturi Springfield Armory M1 Carbine CO2 BB Rifle shot pretty close to the bullseye, just s slight bit to the left and about 1-2 inches high. The rear sight is adjustable for elevation so that can be taken care of pretty easy.

All in all I really like the Air Venturi Springfield Armory M1 Carbine CO2 BB Rifle other than the lower than expected fps which may have been something to do with my rifle? I will have to try a fresh CO2 with it sometime to see if this can be improved but even with the lower velocity the Air Venturi Springfield Armory M1 Carbine CO2 BB Rifle performs well hitting what ever you are shooting at with excellent accuracy. The blowback action gives the Air Venturi Springfield Armory M1 Carbine CO2 BB Rifle just enough recoil feel to tap your shoulder a bit and of course give you that nice short and light single action only trigger.

Categories: 4.5mm / .177 cal, BB, Blowback, CO2, Field Test, Review, Semi Auto, YouTube Video, Rifle Tags: AirVenturi, Springfield Armory, M1 Carbine

Crosman Bushmaster MPW CO2 Blowback BB Machine Gun Field Test Review

No Comments

Make sure to watch my Table Top Video Review for the Crosman Bushmaster MPW CO2 Blowback BB Machine Gun for all the details and specifications. And if you have not already taken a look at the Crosman DPMS SBR CO2 Blowback BB M4 then watch those video reviews since both guns are very similar internally with some cosmetic differences.

The purpose of my Field Test Shooting Video is to find out how the airgun being reviewed performs in terms of velocity and accuracy, and if the ratings on paper end-up being the same or close to the tested results. Crosman claims the Crosman Bushmaster MPW CO2 Blowback BB Machine Gun is capable of shooting 5.1 grain 4.5mm Steel BB’s at up to 430 fps. When I tested the Crosman Bushmaster MPW CO2 Blowback BB Machine Gun using my Chronograph averaging out 5 shots using a brand new set of CO2 cartridges I averaged 385 fps. Note the temperature in my Indoor Airgun Sea Can Shooting Range was not super warm at about 20-22 degrees Celsius or right around 70 degrees Fahrenheit. I was able to get 405 fps from the Crosman DPMS SBR CO2 Blowback BB M4 but I have a feeling the temperate may have been a little bit warmer for the DPMS SBR Testing which does help to increase the fps.

Moving on to the accuracy portion of this Field Test Shooting Review for the Crosman Bushmaster MPW CO2 Blowback BB Machine Gun, I loaded up the 25 round magazine with the maximum amount t it would hold and then placed 10 semi auto shots on my paper target setup 30 feet downrange. I was using a rested and seated shooting position to help minimize human factor. I was a bit surprised that the Crosman Bushmaster MPW CO2 Blowback BB Machine Gun shot a 2.5 inch semi auto 10 shot group since the Crosman DPMS SBR CO2 Blowback BB M4 was able to get just under 1 inch when I performed the same test.

I then flipped the semi auto selector switch to full auto and dumped the remaining 15 rounds into my paper target in full auto mode and to my surprise the Crosman Bushmaster MPW CO2 Blowback BB Machine Gun actually tightened up it’s grouping a little bit closer to 1.5 inches which is amazing in full auto mode with the airgun rocking around a lot due to the blowback action.

In summary the Crosman Bushmaster MPW CO2 Blowback BB Machine Gun performed a lot like the Crosman DPMS SBR CO2 Blowback BB M4, just a little bit lower fps perhaps because of the difference in temperature when both of the airguns where tested. In semi auto mode I should have been able to get a tighter grouping, perhaps it was my performance on this day? But in full auto mode I was able to get nearly identical results as I shot with the Crosman DPMS SBR CO2 Blowback BB M4.

I think it really comes down to which of the Crosman AR type full auto BB rifles you like the look of since both are very capable shooters. Or just get both if you can’t decide :)

Categories: 4.5mm / .177 cal, BB, Blowback, CO2, Field Test, Full Auto, Review, Rifle, Semi Auto, YouTube Video Tags: Crosman, Crosman MPW, Bushmaster MPW, Crosman Remington DPMS SBR

Umarex Legends Cowboy Shell Ejecting CO2 BB Rifle Review

1 Comment

This Review for the Umarex Legends Cowboy Shell Ejecting CO2 BB Rifle is a bit different than most I do since usually I perform a dedicated Table Top and Field Test Reviews for each gun I review here on the Replica Airguns Website. I feel that since the Umarex Legends Cowboy Shell Ejecting CO2 BB Rifle is such a “long gun” that showing it on the table would not work so well , plus it was a super nice day and I wanted to get outside and maybe even shoot a little bit.

I will be performing my usual Field Test Shooting video where I test the Feet Per Second and accuracy at 30 feet so stay posted for that. For now I will leave you with this outdoor “Show and Tell” review.

Specifications:

Type: CO2 BB Rifle.
Manufacturer: Umarex
Model: Umarex Legends Cowboy
Materials: Mainly metal with plastic stock.
Weight: 5.95 pounds (2699 grams).
Length: 38 inches total length
Barrel: 19.25 inch Metal non-rifled smooth bore.
Propulsion: Dual 12 gram CO2.
Action: Lever Action.
Ammunition Type: 4.5mm Steel BB's.
Ammunition Capacity: 10.
FPS: 410 fps.

Trigger Pull: The trigger pull on the Umarex Legends Cowboy Shell Ejecting CO2 BB Rifle is pretty much a single action only trigger since you will need to work the lever action to not only elect and chamber a shell but to also pre cock the hammer. Once the hammer is cocked and ready the trigger pull is short, light and crips, perfect for accurate shooting.

Accuracy: I have only shot 16 rounds through the Umarex Legends Cowboy Shell Ejecting CO2 BB Rifle during the making of this review video and found the Umarex Legends Cowboy Shell Ejecting CO2 BB Rifle to shoot right on target at 30 feet out. I did notice it shot just slightly high at this range but not a lot and it was dead center windage wise. For longer ranges you can adjust the rear sight to raise the barrel even more. In terms of power it’s hard to say what I was getting, Umarex says it should hit around 410 fps, I felt like it was pretty close to this , maybe a tad bit faster but I will find out for sure when I perform my Field Test Shooting Video Review shortly.

Build Quality: The Umarex Legends Cowboy Shell Ejecting CO2 BB Rifle looks and feels great coming in at nearly 6 pounds and built out of mostly metal with a plastic stock. Don’t be too put out by the plastic stock, it does mimmic the part of wood very well. All the metal parts have a semi-gloss or I would even say matt back finish and so far the paint is wearing pretty good, no noticeable paint coming off that I can see. The action works great with no failure to chamber, eject or shoot rounds.

Realism: The Umarex Legends Cowboy Shell Ejecting CO2 BB Rifle is an awesome example of the classic lever action cowboy rifle. Having the ejecting shells makes it feel like you are shooting the real deal right from the time you start loading up the 10 shells into the pipe magazine, until you work that lever action and pull the trigger. Watching the ejected shells fly through the air is the icing on the cake :) There is not much more you can ask for from a BB firing replica Lever Action Cowboy Rifle!

Pros:

  • Super realistic replica lever action BB firing Cowboy Rifle.

  • Fully working lever action, chambers and ejects shells perfectly.

  • Good weight and feel to it with lots of metal throughout.

  • Everything works exactly like the real steel version.

  • Duel CO2 to help get not only more shots before reloading CO2 but also a more consistent FPS from all shots.

  • Adjustable rear sight for elevation.

  • Comes with 10 rounds and can also use your Umarex Colt Single Action Army BB shells in it.

  • Plastic imitation wood stock looks very much like real wood.

Cons:

  • Stock is not real wood, hopefully Umarex offers a wood upgrade for it at some time.

  • A bit low in FPS, why not take it right up to 499 fps since the US version has a 600 fps rating.

  • Took too long for us to get it here in Canada!.

Comments:

The Umarex Legends Cowboy Shell Ejecting CO2 BB Rifle is a perfect example of an Airgun company listening to their customers and bringing to market exactly what we are looking for, kind of like the Single Action Army Revolvers that came out a while back. These old cowboy guns are a blast to shoot from the time you pick up the rifle, insert 10 shells into the magazine, work the lever action, pull that trigger and then repeat 10 times. This is a must have for anyone looking for a super realistic BB rifle, even if you’re not an old west cowboy fan I think you will love shooting the Umarex Legends Cowboy Shell Ejecting CO2 BB Rifle!

My Table Top Video of the Umarex Legends Cowboy Shell Ejecting CO2 BB Rifle:

Categories: 4.5mm / .177 cal, BB, CO2, Field Test, Review, Repeater, Rifle, YouTube Video Tags: Umarex, Legends Cowboy Rifle

Air Venturi Springfield Armory New Products to Review

No Comments

It felt like Christmas the other day when a bunch of Springfield Armory new products showed up at my door! So first off thanks to Air Venturi for sending me these new products for review. I already got my hands on the Springfield Armory XDM 3.8 and 4.5 GBB Airsoft version but have been wanting to also review the CO2 Blowback Steel BB versions.

Air Venturi not only sent me a Springfield Armory CO2 Blowback BB 3.8 all black and 4.5 Silver slide but also the Springfield Armory M1 Carbine CO2 Blowback Steel BB . As an added bonus I also received the wood stock for the M1 Carbine and the Springfield Armory 1911 CO2 Blowback Steel BB Pistol which I had no idea was even available!

In this video I show all these new Springfield Armory CO2 Blowback BB guns quickly but will of course be making dedicated Table Top and Fired Test Shooting Video for them upcoming.

Categories: 4.5mm / .177 cal, BB, Blowback, CO2, Pistol, Review, Rifle, Semi Auto, YouTube Video Tags: AirVenturi, Springfield Armory, XDM, M1 Carbine

Crosman Bushmaster MPW CO2 Blowback BB Machine Gun Table Top Review

1 Comment

Type: BB Rifle.
Manufacturer: Crosman.
Model: Bushmaster MPW.
Materials: Metal & plastic.
Weight: 6.5 pounds (4.98 kilograms).
Length: 21 inches (Stock all the way in).
Propulsion: 12 gram CO2 dual cartridges.
Action: Blowback - single action only.
Ammunition Type: 4.5mm steel BB's.
Ammunition Capacity: 25 rounds.
FPS: 430fps.
Rate of Fire: 1400 rounds per minute in full auto

Trigger Pull: The trigger pull on the Crosman Bushmaster MPW CO2 Blowback BB Machine Gun is single action only since the charging handle must be cocked first before you can shoot it. The trigger is short and fairly light as you would expect from an AR type trigger action. The bonus with the Crosman Bushmaster MPW CO2 Blowback BB Machine Gun is when you switch it over to full auto mode and just one pull and hold of the trigger will empty the 25 round magazine in just seconds.

Accuracy: So far I have not actually shot the Crosman Bushmaster MPW CO2 Blowback BB Machine Gun but since the internals are exactly the same as the Crosman DPMS SBR CO2 Blowback BB M4 I have already fully review, then I will expect it to performa about the same until I do my Field Test Shooting Review. You shoudl expect about 400 fps in semi auto mode and in terms of accuracy I hope to get a similar 3/4 inch 10 round semi auto grouping from 30 feet away. Full auto will open up the group a bit but not too much, maybe around 2 inches…

Build Quality: The Crosman Bushmaster MPW CO2 Blowback BB Machine Gun is well made all around. Weighing in at 6.5 pounds without any add on accessories it feel solid and well built. There is a lot of metal going on inside and out of this rifle but keep in mind the top and bottom receiver are plastic with metal parts where they need to be like in the internals, pretty much all the working parts are metal, the magazine is full metal, the buffer tub is metal, charging handle, selector switch, magazine release, bolt release, trigger and of course the barrel is metal.

Realism: The Crosman Bushmaster MPW CO2 Blowback BB Machine Gun is about as real as you are going to get in a CO2 Blowback AR/M4 styled Airgun. You can even take it apart and split the top and bottom receivers like the real steal version. The blowback action gives you some recoil but more importantly offers a true single action trigger and of course the full auto ability we all love. Almost all the working parts work like they would on a real M4 other than the forward assist which is moulded into the receiver.

Pros:

  • Super realistic working M4/AR 4.5mm BB Rifle just like the DPMS SBR but in a different flavor.

  • Full blowback operation with both semi and full auto shooting, can feel the blowback operation rocking the gun.

  • Good weight and feel to it.

  • Almost everything works exactly like the real steel version. (Charging handle, dust cover, bolt release, magazine release, selector switch…)

  • Duel CO2 full metal drop out magazine that holds the 25 4.5mm steel BB’s.

  • Adjustable and customizable AR buttstock.

  • Included red dot sights and ability to add pop-up iron sights.

  • Lots of rails for mounting additional cool hardware.

  • Built in Mock Suppressor.

Cons:

  • Receiver is plastic but well made and does not compromise feel or weight since there is lots of metal throughout this gun.

  • No iron sights included.

  • No fore grip included like the DPMS SBR.

Comments:

The Crosman Bushmaster MPW CO2 Blowback BB Machine Gun is really pretty much the same as the Crosman DPMS SBR CO2 Blowback BB Full Auto Rifle with more or less Cosmetic changes. One big advantage over the DPMS SBR is the AR comparable buffer tube which allows you to swap out any AR styled rear stock you choose! You also get an included Red Dot sight since there are no Iron sights. The Crosman Bushmaster MPW CO2 Blowback BB Machine Gun is super customizable with its quad-rail so go ahead and dress yours up with Iron sights, lasers, tactical lights, foregrips or whatever else you can dream up.

My Table Top Video of the Crosman Bushmaster MPW CO2 Blowback BB Machine Gun:

Categories: 4.5mm / .177 cal, BB, Blowback, CO2, Comparison, Full Auto, Review, Rifle, Semi Auto, YouTube Video Tags: Crosman MPW, Crosman, Crosman Remington DPMS SBR

June Update with New Products from Sig Sauer - Crosman - KWC - Air Venturi - Pocket Shot

No Comments

Again I have some new products to show everyone. Some we got a bit of a preview of when I was at SHOT Show 2019 earlier this year but now I have them in my hands to show off and of course will be doing full Table Top and Filed Test for anything new as soon as I can get to them.

Starting with Sig Sauer, they sent me their brand new Sig Sauer P365 CO2 Blowback BB Pistol. This was probably one of my favorite new Air Pistols at SHOT Show simply because it is so small and somehow Sig was able to find a way to put a full size drop out metal magazine that holds both the CO2 and BB’s in it. This is one I am really looking forward to testing out in the Indoor Sea Can Airgun Shooting Range.

Another fantastic product is Crosman’s DPMS Full Auto CO2 BB Rifle which was pretty much perfect the first time around. Well at SHOT Show this year Crosman updated it a bit mainly with some cosmetic changes and now is offering the Crosman MPW, a slightly shorter version of the DPMS and now with an AR Compatible Stock for customizing your Crosman’s MPW Full Auto CO2 BB Rifle.

Yet one more item I was drooling over at SHOT Show 2019 where the Air Venturi Springfield Arms XDM Air Pistols being offered in GBB Airsoft and CO2 BB models along with 3.8 and 4.5 inch versions. It looks like the GBB Airsoft venisons where first out of the factory and I was able to get them in two styles, the Air Venturi Springfield Arms XDM 3.8 GBB Airsoft and Air Venturi Springfield Arms XDM 4.5 GBB Airsoft.

So maybe not as exciting… I also take a look at a NBB CO2 BB Makarov from KWC that is pretty basic but is much less expensive and will offer higher FPS and more shots per CO2 being that it is Non-blowback Airgun. It will be interesting to see how it compares performance wise to the KWC Full Blowback CO2 BB version.

Last but also super cool and I know it’s not really as Airgun related but still something I think everyone will be interested in is the Pocket Shot Pro Arrow Pouch with D-Loop. I reviewed the Pocket Shot “Slingshot” a while back, this new product allows you to use standard Arrows with their new Arrow Pouch getting around 40 pounds of pull and it comes with a trigger release. By the way the Pocket Shot Pro Arrow system is legals to hunt deer with in most US States, I’m not sure about Canada but perhaps here too?

Categories: 4.5mm / .177 cal, 6mm, Accessory, Airgun News, Airsoft News, BB, Blowback, CO2, Full Auto, Gas, GBB, Non Airguns, Pistol, Replica Airguns News, Review, Rifle, Semi Auto, YouTube Video Tags: KWC, Makarov PM, Crosman, Crosman MPW, Bushmaster MPW, SIG Sauer P365, Sig Sauer ASP, AirVenturi, Springfield Armory, XDM, Pocket Shot, Pro Arrow Pouch

Top 5 most often asked Questions I Can Not help you with!

No Comments

I do my best to get back to everyone with a question I have the answer to but there are times when I simply do not have the answer to your question. And for some reason these questions seem to come more often than others. I figured I would address these questions that I can not answer so you will know the reasons why and that I’m not just being a jerk by not answering them for you.

Here is a list of my Top 5 most often asked Questions I Can Not help you with:

  1. Can you send this gun to …

  2. How much is this item where I live?

  3. How do I fix this problem with my gun?

  4. Which Airgun should I buy?

  5. Can this Airgun kill a …

Categories: BB, Airsoft, Blank Gun, Pistol, Rifle, YouTube Video Tags:

KWA Ronin TK.45 Tekken AEG 2.5 & 3 Airsoft Rifle Field Test Review

1 Comment

Make sure to watch my Preview Vimeo Video for the KWA Ronin TK.45 Tekken AEG 2.5 & 3 Airsoft Rifles where I go over some of the specifications and also end off the video with my SHOT Show KWA Interview where Johnathan shows us around the KWA Ronin TK.45 Tekken AEG 2.5 & 3 Airsoft Rifles.

In this Field Test Shooting Review I test both the KWA Ronin TK.45 Tekken AEG 2.5 & 3 Airsoft Rifles out putting some rounds through my Chronograph to see what the actual fps is. I also put some rounds down range to see how the accuracy is for both of these KWA AEG Airsoft Rifles is.

Starting with my Chronograph test, I was using heavier than normal .32 gram Airsoft BB’s to see if this would help out a bit with the accuracy but keep in mind it will slow the fps down a bit compared to using standard .20 gram Airsoft BB’s. My results for both AIrsoft guns where pretty close with the KWA Ronin TK.45 Tekken AEG 2.5 Airsoft Rifle shooting slightly faster at around 324 fps versus the KWA Ronin TK.45 Tekken AEG 3 Airsoft Rifle coming in with a velocity of 314 fps. The KWA Ronin TK.45 Tekken AEG 2.5 Airsoft Rifle can be adjusted for 320-380 fps by accessing a screw situated at the end of the buffer tube. The KWA Ronin TK.45 Tekken AEG 3 Airsoft Rifle does not have this feature since it has its recoil system setup inside the buffer tube. You can swap out springs if you want to adjust your fps on the TK.45 3 Airsoft Rifle.

Moving on to the accuracy test. I know 30 feet is not really a great range for testing out an AEG Airsoft rifle but it does give us an idea of how tight it will shoot at this range and then all we need to do is expand that a bit as we get further out. But a tight group at 30 feet should mean a decent group even when shooting further away.

I do have to say I was having some difficulty with the KWA Ronin TK.45 Tekken AEG 3 Airsoft Rifle using the same ammo in both guns so this should not be a problem if it works well in one but not the other? That said I was getting misfeeds followed by double shots using the .32 gram Airsoft BB’s in the TK.45 3 Airsoft Rifle. Even in full auto it seemed to misfeeds for a bit but then cleared up at the end. Maybe a different ammo choice or some break in time is required? That said both Airsoft guns seemed to shoot low so perhaps a hop-up adjustment is in order. The KWA Ronin TK.45 Tekken AEG 2.5 Airsoft Rifle seemed to shoot the lowest even requiring me to retest it since my first go around shot below the range of the camera. When I sighted in at the top of the target the second time I did get a very tight 1 inch grouping just below the bullseye. In full auto both guns punched nice 2-3 inch holes through the paper targets.

Other than the strange miss feeding issue I had with the KWA Ronin TK.45 Tekken AEG 3 Airsoft Rifle, I found them to be very nice rifles. The simulated blowback recoil action felt nice on the shoulder so personally I would go for the KWA Ronin TK.45 Tekken AEG 3 Airsoft Rifle, I would just need to workout the miss feeding issue for sure. Maybe even a shorter version of the KWA Ronin TK.45 Tekken AEG 3.0 Airsoft Rifle would be nice? You can purchase one of these KWA Airsoft Rifles over in our Canada Replica Airguns store!

Categories: 6mm, AEG, Airsoft, Blowback, Comparison, Field Test, Full Auto, Review, Rifle, Semi Auto, YouTube Video Tags: KWA, KWA Ronin TK.45 Tekken

Umarex Steel Strike CO2 Blowback BB Rifle Table Top Review

No Comments

Type: BB Machine Gun/Rifle.
Manufacturer: Umarex USA.
Model: Steel Strike  (AR Platform).
Materials: Plastic shell with internal metal parts.
Weight: 3.8 pounds (1720 grams).
Barrel: 9 inch Metal non-rifled.
Propulsion: CO2 x 2 (housed in b uffer tube)
Action: Semi and 6 round burst blowback, single action only.
Ammunition Type: 4.5mm BB's.
Ammunition Capacity: 900/30 round drop out hopper/magazine.
FPS: 400.

Trigger Pull: The trigger pull on the Umarex Steel Strike CO2 BB Rifle is single action only, so you will need to charge the rifle by pulling back the charging handle first, once this is done the trigger is reset and the gun is ready to shoot. The blowback operation charges the internal bolt automatically after each shot so keep this in mind as the gun is going to be live and ready to shoot until you either run out of ammo or CO2. Make sure to place it in safe mode when not in use especially when you have CO2 in the gun.

Accuracy: I have not shot the Umarex Steel Strike CO2 BB Rifle yet but will remaking a Field test Shoting video very soon for it. But for a reference I did shoot the Umarex Steel Froce which is a very similar product and this is how it performed for me:

Shooting the Umarex Steel Force at a target from 30 feet away in a semi rested position using both the semi auto and 6 round burst modes, the Steel Force performed very good getting around a 1.5 inch 10 shot grouping in semi auto and then spreading out a bit in 6 round burst mode which was to be expected, still a respectable grouping. Shots where well centered on the target but I did have the advantage of using a red dot scope, I found when using the none adjustable open sights that come with the Umarex Steel Force that I was shooting under the target at closer ranges. My Chrony testing did not go exactly as planned due to my temperamental Chronograph but I was able to get two shots to read and they average out at 466 fps, well over the 430 claimed fps.

Build Quality: The Umarex Steel Strike CO2 BB Rifle is mostly plastic on the outside with most of it's metal parts on the inside, pretty much everything you can see on the outside is going to be plastic except for maybe the magazine release and selector switch. The plastic seems durable enough but it has just a bit too much shine for me which I think makes it look less like metal and more like plastic. Everything seemed to function as expected but again I would have liked to have seen a bit more metal, not necessarily the outer shell, but I feel the flash hider, trigger, flip up sights and charging handle could have been made out of metal and would have given this Umarex Umarex Steel Strike CO2 BB Rifle a bit more weight and balance to it.

Realism: The  Umarex Steel Strike CO2 BB Rifle is designed on the AR platform and for the most part is about the right size shape and look of an AR 15 / M16 type rifle. Even the selector switch, magazine release, rear adjustable stock and Charging handle function just like a real AR 15! Some parts are molded in just for looks like the bolt release, dust cover and forward assist but at least they look the part. The plastic for me was the real tell here as it kind of looks like plastic where as some plastic guns are really hard to tell they are not metal, but other than that this is a pretty decent replica of an AR Rifle.

Available From: The Replica Airguns Store.

Pros:

  • Decent 400 fps rating.

  • 900 round hopper with 30 shots per magazine fill.

  • Will get a decent amount of shots with its dual CO2 configuration.

  • Removable and 2 position adjustable stock.

  • Flip up sights with optical sight top rail option.

  • Lots of rials for adding on accessories.

  • Not a bad replica of an AR platform gun.

  • Full auto has a very high rate of fire.

  • Internal blowback does give a bit of recoil feedback feel.

  • CO2 in the buffer tube makes more sense?

  • Price point is good for a fun full auto BB rifle.

Cons:

  • Pop up sights are non adjustable.

  • Plastic finish could have been a bit higher grade, like what most Airsoft AR's use.

  • Just a bit more metal would have been nice and added to the overall weight a bit. (Switches, Sights, Charging handle.

  • No sling mounts.

Comments:

The Umarex Steel Strike CO2 BB Rifle looks to be an improvement over the Steel Storm and Steel Force, I like the new placement of the duel CO2 into the buffer tube and changing the location of the BB’s from the upper receiver and into the drop out magazine which is where we would normally expect them to be. We also get a magazine hopper capacity of up to 900 rounds with the new Umarex Steel Strike CO2 BB Rifle so no having to refile int for several CO2 swap-outs. I think the overall looks ahed improved and the tighter aperture of the pep sight shoudl make getting BB;s on target with more accuracy a bit easier. I look forward to seeing what kind of performance I get out of the Umarex Steel Strike CO2 BB Rifle when I test it out during my upcoming Field Test Shooting Video.

My Vimeo Table Top Videos for the Umarex Steel Striker BB Rifle:

Categories: 4.5mm / .177 cal, BB, Blowback, CO2, Comparison, Review, Rifle, Semi Auto, YouTube Video, Full Auto Tags: Umarex, Umarex Steel Strike, Steel Strike

KWA Ronin TK.45 Tekken AEG 2.5 & 3 Airsoft Rifle Preview

No Comments

This is going to be the only video this week. I’m turning 50 on Friday April 5th and had a goal that I wanted to complete before I reached 50. I wanted to get my 1993 Ducati 750 Super Sport all fixed up and ready to go, and it’s been a lot of work cleaning, fixing, painting… Perhaps it’s a bit of a mid life crisis sort of thing but at least it’s gotten my but in gear :) Stay tuned till the end of the video for some video of what the mighty Ducati looks like today if you’re into that sort of thing!

Getting back to the KWA Ronin TK.45 Tekken AEG 2.5 & AEG 3 Airsoft Rifles. You may remember my Shot Show Interview with Jonathan, well he went front to back and up and down the entire KWA product line ending with the KWA Ronin TK.45 Tekken AEG 2.5 & AEG 3 Airsoft Rifles and boy does he know his stuff, I will be adding the portion of Jonathan’s interview that deals with these rifles at the end of this video also.

Here is some info on the KWA Ronin TK.45 Tekken AEG 2.5 & AEG 3 Airsoft Rifles…

Specifications:

  • Type: Airsoft Rifles

  • Manufacturer: KWA

  • Model: Ronin TK.45

  • Materials: Metal and Polymer

  • Weight: (AEG 2.5: 2676g - 5.9 b) (AEG 3: 3230g - 7.1lb)

  • Barrel: Smoothbore

  • Power Source: Electric (Battery)

  • Action: Semi-Automatic/Full-Automatic

  • Ammo Type: 6mm Airsoft BBs

  • Ammo Capacity: 120 Rounds

  • FPS: 380

Features:

AEG 2.5: 

  • Variable Performance System (VPS) allows for quick and simple FPS adjustment.

  • CQB 6" barrel with KeyMod handguard.

  • PDW style adjustable stock.

  • Angled polymer magwell doubles as a foregrip.

  • Equipped with PTS Enhanced Polymer furniture.

AEG 3:

  • Kinetic Feedback System (KFS) provides realistic kickback with every shot.

  • 10" barrel with M-LOK handguard.

  • Angled polymer magwell doubles as a foregrip.

  • Equipped with PTS Enhanced Polymer stock and sights.

  • Quick-change spring systems allows for enhanced customizability.

Categories: 6mm, Airsoft, AEG, Blowback, Comparison, Full Auto, Review, Rifle, Semi Auto, YouTube Video Tags: KWA, KWA Ronin TK.45 Tekken

KWA SHOT Show 2019 Interview

1 Comment

Being that KWA is a new product in our Replica Airguns Online Stores, I wanted to go over as much of the KWA product line as possible and really not only learn for myself but be able to share all of this information with everyone. I have to thank Jonathan for spending so much of his time really diving in deep to what KWA has to offer.

There really is an absolute ton of info in this video that in no way I can put into words so you’re going to have to watch this KWA SHOT Show Interview from start to finish. So go get yourself a snack and something to drink, cause it’s going to be a long one!

Categories: 6mm, AEG, Airsoft, Airsoft News, Blowback, CO2, Full Auto, Gas, GBB, Pistol, Replica Airguns News, Rifle, Semi Auto, YouTube Video Tags: KWA

ASG SHOT Show 2019 Interview

No Comments

This year at SHOW Show 2019 Bob from ASG had a lot to show me so make sure to watch the full Interview Video for all the details and information.

Bob and I first go over a new ASG CZ Airsoft Pistol called the Shadow 2 kind of like a modernized SP-01 Shadow. The ASG CZ Shadow 2 is a competition stile pistol with adjustable sights and trigger and will come in both CO2 and Green Gas magazine options.

Next up Bob showed me the CZ75 SP01 ACCU Shadow with some special edition features like: Ergonomic anodized aluminum grips with grip tape, match style high sights, oversized slide release and ambidextrous safety and a tunable anodized aluminum trigger.

ASG being the exclusive partner with ICS had some new ICS Pistols to show us. First up was the Airsoft ICS XPD, a compact Gas Blowback System that will come with shorter compact magazines and extended magazines that will hold more green gas. Both Gas magazines will feature a new valve system called the Revo system.

If you like the feel of a 1911 but perhaps want something a bit more modern then checkout the New ASG Korth PRS Airsoft Pistol, you can even put real 1911 grips on it!

Not new to ASG this year is the CZ Scorpion Evo 3 A1 but ASG has enhanced this Airsoft rifle by working with a designer to adding an M-Lok Handguard, Magwell Grip and Fore Grip that will be a three part system you can customize.

Last Bob showed me around the CQR Hera Arms Airsoft Rifle that is a collaboration of ASG, Hara Arms, ICS. It will come in standard Mosfet and Triple-S (Smart Shooting System).

Looking forward to getting my hands-on some of these new ASG

Categories: 4.5mm / .177 cal, 6mm, AEG, Airgun News, Airsoft, Airsoft News, BB, Blowback, CO2, Full Auto, GBB, Gas, Pistol, Replica Airguns News, Rifle, Revolver, Semi Auto, YouTube Video Tags: SHOT Show 2019, SHOT Show, ASG

American Airsoft Factory SHOT Show 2019 Interview

No Comments

I stumbled on what I thought was one of the most interesting new Airsoft products at SHOT Show this year. A company by the name of American Airsoft Factory has made an AR styled Airsoft Rifle that is completed Battery/Electric operated but acts and feels like a Gas Blowback System. They use a computerized fire control system to operate a mechanical Open Bolt with full Blowback operation. The American Airsoft Factory AR system will auto decide when the your standard Hi-cap or Mid-cap AEG magazine is empty and the bolt will lock back ready to swap out a full magazine, just press the bolt release and you’re ready to engage your target!

The American Airsoft Factory product will not be cheap but it is incredibly high end and features real steel compatibility. I see this being of interest to military and police organizations along with serious Airsofters that are looking for the ultimate Airsoft Rifle.

So now I just need to get my hands on an American Airsoft Factory rifle so I can test it out and make a review! Maybe we can even add them to our Online Replica Airguns Stores?

Categories: 6mm, AEG, Airsoft, Blowback, Full Auto, Airsoft News, Replica Airguns News, Rifle, Semi Auto, YouTube Video Tags: American Airsoft Factory

Air Venturi SHOT Show 2019 Interview

No Comments

Air Venturi announced their new Springfield Armory lien of BB and Airsoft guns at SHOT Show 2019 and of course I stopped by to talk with Scott and see what these new products where all about!

First off we have the Springfield Armory M1 Carbine Rifle. You will be able to get it in either 4.5mm Steel BB or 6mm Airsoft versions. Both will have full drop out metal magazines that hold the 12 gram CO2 and either 15 BB or Airsoft rounds. You can expect around 40-60 shots per CO2 since the Springfield Armory M1 Carbine is a full blowback Airgun. The standard version will come with a synthetic wood stock that is very believable but for around $100 more you will have the option of a real wood stock which does add a bit to more weight to the rifle.

Continuing on with some more Springfield Armory Airguns. Air Venturi will be distributing the XDM pistol in a compact and full size configuration, again both 4.5mm Steel BB and Airsoft versions. There will be a solid black version and a two tone silver slide version so lots of options to pick from. The 4.5mm Steel BB version will use a 12 gram CO2 while the Airsoft version will allow for Green Gas or CO2 mags.

I wanted to mention one more product Scott showed me that is still in production, a reactive target system called the Bata-Bang that connects to your phone via Bluetooth allowing you to time your shooting and play shooting games with it and others even online. Hopefully we see this product soon from Air Venturi!

Categories: 4.5mm / .177 cal, 6mm, Airgun News, Airsoft, Airsoft News, BB, Blowback, CO2, Gas, GBB, Pistol, Replica Airguns News, Rifle, Semi Auto, YouTube Video Tags: AirVenturi, Springfield Armory, M1 Carbine, XDM