Type: BB Pistol. Manufacturer: Daisy Model:Powerline 340. Materials: Mostly metal construction. Weight: 1 Pound (454 grams). Barrel Length: 4-5 inches Total Length: 8.5 inches. Propulsion: Spring Action: Single action only. Ammunition Type: 4.5mm steel BB’s. Ammunition Capacity: 13/200 round magazine. Max FPS: 240 fps.
Trigger Pull: The Daisy Powerline 340 Spring BB Pistol has a single action only trigger. You will have to pull the slide back for each shot as this motion draws the spring back and also cocks the hammer. The trigger pull is fairly decent with about a quarter inch of take-up followed by a light predictable release. There will not be any action shooting since the trigger is not double action and the fact that the slide must be pulled back for each shot.
Accuracy: So far I have not made my Field Test Shooting Video for the Daisy Powerline 340 Spring BB Pistol but I did take it outside for some good old plinking to see how it would perform causally shooting in the yard. The Daisy Powerline 340 Spring BB Pistol shot a bit harder than I was expecting it to and I was even able to hit targets a good 50 or so feet away but did have to account for some trajectory arch. Accuracy seemed good in general without a lot of need to adjust my aim point as the sights seemed well centered out of the box which is good since they are not adjustable.
Build Quality: The build quality of the Daisy Powerline 340 Spring BB Pistol is nothing exciting as it is mostly plastic with a metal barrel and perhaps a few other internal metal parts. Being that the Daisy Powerline 340 Spring BB Pistol is mostly plastic it only weighs in at about a pound but feels good in the hand. Everything feels pretty solid on the airgun with good overall fit and finish.
Realism: In terms of realism the Daisy Powerline 340 Spring BB Pistol is a good replica of a Beretta 92 in terms of looks and size comparison. Other than the open slide area that exposes the inner barrel being shorter than a real steel Beretta (probably to accommodate the internal spring) the Daisy Powerline 340 Spring BB Pistol looks very close to a Beretta 92. Moving parts include the slide, hammer, magazine release and slide catch release which is actually the safety. Even the magazine is drop out and near full size. I also like that there are no perceivable screw holes which is usually the case with these types of low cost all plastic Airguns when they are basically two halves slapped and screwed together.
Pros:
Pretty decent replica of a Beretta 92 in general.
For an inexpensive Airgun it has a lot of working parts that make it more realistic.
Very low cost to buy and operate, no CO2 required (Under $40 in Canada Store right now).
Has a recessed barrel for added realism.
Single action only trigger is not overly long or heavy.
Lots of ammo stored in the internal hopper so no need for a lot reloading.
Safety actually looks like part of the gun built into the slide catch release.
Full size dropout magazine.
Weight and feel of gun are pretty good considering so much plastic.
Cons:
Not super high in the fps department.
Need to cock the slide for every shot so not going to be an action shooter.
Made in China.
Comments: The Daisy Powerline 340 Spring BB Pistol is one of those low cost yet kind of fun BB guns that as long as you don’t have super high expectations you will get a ton of fun out of for very little cost. At about $40 Canadian with a bit more for some 4.5mm steel BB’s you are ready to shoot all day long. I was a bit surprised at how decent of a little BB gun the Daisy Powerline 340 Spring BB Pistol is. It looks real enough, has a decent build quality to it, actually shoots pretty good with a nice trigger and for such a low cost airgun it has a lot going for it like lots of working parts and even a removable full size magazine that doubles as a 200 round hopper with 13 round internal magazine. I don’t think anyone will be disappointed buying the Daisy Powerline 340 Spring BB Pistol and it would make a perfect first BB gun for a younger person looking to get started out in the sport.
My Vimeo Table Top Review for the Daisy Powerline 340 Spring BB Pistol:
Type: Pellet Revolver. Manufacturer: Gamo Model:PR-776. Materials: Mostly metal construction. Weight: 2.2 Pounds (1 kg). Barrel Length: 6 inches Total Length: 11.5 inches. Propulsion: CO2 x1 Action: Revolver single and double action. Ammunition Type: .177 caliber pellets. Ammunition Capacity: 8 rounds per magazine. Max FPS: 400+ fps.
Trigger Pull: The Gamo PR-776 CO2 .177 Caliber Pellet Revolver has your traditional revolver single and double action trigger setup. In double action, the trigger is going to be a bit longer and heavier but it feel fairly smooth with no real friction points and I would consider it to have a medium trigger pull. When you cock the hammer back placing the Gamo PR-776 CO2 .177 Caliber Pellet Revolver in single action, the trigger pull becomes very short with virtually no take-up at all and the weight of the trigger is very light allowing for more accurate shots.
Accuracy: Make sure to watch my Field Test Shooting video for the Gamo PR-776 CO2 .177 Caliber Pellet Revolver where I test out the velocity and accuracy in the Replica Airguns Indoor Airgun Shooting Range. In summary the Gamo PR-776 CO2 .177 Caliber Pellet Revolver shot a little bit hotter than claimed at just over 400 fps using around 7 grain lead pellets. In terms of accuracy with a total of 16 shots the grouping spread out to around 4 inches but I am pretty sure a different pellet choice may have made a difference.
Build Quality: The build quality of the Gamo PR-776 CO2 .177 Caliber Pellet Revolver is pretty good overall. It is mostly all metal with the exception of the grips of course, Fit and finishes looks good, everything feel snug adn tight with the exception of the pistol grips. I feel like the grips could easily move out of place and get caught on something. This is not a problem when shooting, more so when in a holster. The Gamo PR-776 CO2 .177 Caliber Pellet Revolver feels good in the hadn't, nice and solid and with a good weight to it.
Realism: The Gamo PR-776 CO2 .177 Caliber Pellet Revolver is a decent looking Airgun in the style of a traditional revolver, I wouldn’t say it’s an exact replica of any specific revolver in production but it does tick off all the boxes in terms of looking realistic. The weight and feel for now and the Gamo PR-776 CO2 .177 Caliber Pellet Revolver also has a recessed barrel and hidden CO2 crew. The only real giveaway would be the cylinder size as it is a bit smaller than expected and of course is chambered for .177 caliber pellets.
Pros:
Good power over 400 fps using actual lead pellets.
Quicker reloading over shell loading revolvers
More shots per magazine reload, 8 versus 6.
Comes with two metal 8 round magazines.
Traditional single and double action trigger.
White dot front sight with fully adjustable rear sight.
Good weight and feel to it.
Fit and finish look good.
Recessed barrel for realistic looking barrel opening.
Should be able to use a dovetail type scope mount for adding on a red dot or magnified scope.
Cons:
Not a fan of the loose pistol grip setup to access the CO2.
Was hoping to get a bit tighter grouping but may have been a pellet choice issue.
Comments: It was nice reviewing the Gamo PR-776 CO2 .177 Caliber Pellet Revolver as it was a bit different then most of today shell loading revolvers. I like that the Gamo PR-776 CO2 .177 Caliber Pellet Revolver still offered a realistic looking cylinder that the shell loading revolvers have but with the moon clip style magazines that allow for quick adn easy reloading of 8 rounds at a time. The velocity or power of the Gamo PR-776 CO2 .177 Caliber Pellet Revolver was even a bit high than Gamo claims using PBA Platinum pellets since Gamo claims 400 fps using these 5.1 grain lead pellets. My testing with closer to 7 grain pellets yielded fps up and over 400 fps. All the Gamo PR-776 CO2 .177 Caliber Pellet Revolver needs is to be just a little bit more accurate but I feel this may simply be more of a pallet choice, once you find a pellet the Gamo PR-776 CO2 .177 Caliber Pellet Revolver likes I am pretty sure it will deliver accurate shots.
My Table Top Review for the Gamo PR-776 CO2 .177 Caliber Pellet Revolver:
Make sure to watch my upcoming Table Top Review for the Gamo PR-776 CO2 .177 Caliber Pellet Revolver where I go over the specifications, pros and cons and show it up nice and close. In this Field Test Shooting Video I determine what the accuracy and velocity of the Gamo PR-776 CO2 .177 Caliber Pellet Revolver by testing out the fps with my Chronograph along with a accuracy test shooting a paper target at a distance of 30 feet away using a rested shooting position.
For the velocity test I placed a brand new CO2 Cartridge in the Gamo PR-776 CO2 .177 Caliber Pellet Revolver and shot five 6.9 grain lead pellets though my Chronograph. Gamo claims their 5.1 grain PBA Platinum pellets will shoot around 400 fps so I was expecting something in the low to mid 300’s but was surprised at a five shot average of 4115 fps with the much heavier RWS6.9 grain pellets. The slowest shot I achieved was 396 fps while the fastest shot was 434 fps. The temperature was right around 24 degrees Celsius or 75 degrees Fahrenheit.
For the next section of my Field Test Shooting Review I setup a brand new paper target 30 feet down range and loaded up two eight round magazines. The results for the Gamo PR-776 CO2 .177 Caliber Pellet Revolver where a bit confusing with both eight round magazines. It seemed like most of the shots wanted to group within about 1-2 inches of each other but I was getting several outliers that extended the grouping to closer to four inches. Not the best performance but as I have found with many guns, sometimes you need to find a pellet that the gun is happy with. the wrong pellet can really make a difference and I am fairly sure this was the case with the Gamo PR-776 CO2 .177 Caliber Pellet Revolver using the RWS pellets. just not the best choice for it.
The Gamo PR-776 CO2 .177 Caliber Pellet Revolver overall performer well, like I said I really think pellet choice will be the deciding factor in how accurate it is going to be. The velocity was very good for a CO2 Pellet revolver considering I was suing actual lead pellets and not the alloy pellets Gamo was using as their reference. The Gamo PR-776 CO2 .177 Caliber Pellet Revolver uses metal eight round magazines which are easy to preload and allow for two additional shots over the more common these days shell loading revolvers, which makes the Gamo PR-776 CO2 .177 Caliber Pellet Revolver more practical as a target pistol allowing for more power and easier loading.
Type: Break Barrel Pellet Pistol. Manufacturer: Gamo Model:P900 IGT. Materials: Mostly plastic build with some internal metal parts. Weight: 1.28 Pounds (580 grams). Barrel Length: 6.25 inches Total Length: 12.52 inches. Propulsion: Gas Piston (IGT) Action: Break barrel single action trigger. Ammunition Type: .177 caliber pellets.. Ammunition Capacity: 1 round. Max FPS: 400 fps using PBA Platinum pellets (about 5 grain).
Trigger Pull: The trigger on the Gamo P900 IGT .177 Caliber Pellet Pistol uses what Gamo calls their SAT or Smooth Action Trigger system. Overall the single action only trigger feels pretty good, not super light but also not overly heavy. The Gamo P900 IGT .177 Caliber Pellet Pistol has a short take up with a very predictable release point. I found it fairly easy to use and shoot with precision.
Build Quality: The Gamo P900 IGT .177 Caliber Pellet Pistol is mainly made out of plastic, pretty much everything is plastic including the trigger but there will be internal metal parts where they are required. That said the Gamo P900 IGT .177 Caliber Pellet Pistol feels well made with fairly heavy plastic throughout. The Gamo P900 IGT .177 Caliber Pellet Pistol is not super heavy but feels hefty enough in the hand.
Realism: The Gamo P900 IGT .177 Caliber Pellet Pistol is not a replica of any specific pistol in production and has a very modern look to it. I would say it looks more like an airgun than a real gun and that’s exactly what is’t supposed to be so this is not a negative in this case.
Pros:
Reasonable price for a target pistol.
Performed well, can easily get .5 inch groupings from 30 feet away.
No need for CO2.
Inert Gas Technology (IGT) has less vibration and no reduction to power over time.
Fiber optic front sight.
Adjustable rear sight for windage.
Inexpensive to shoot.
Made in Spain.
Ambidextrous design.
Reasonable trigger pull.
Cons:
Not supper powerful. Shot around 300 fps with standard lead pellets.
A bit hard to cock because of such a short barrel.
Rear sight is only adjustable for windage and not elevation.
Comments: The Gamo P900 IGT .177 Caliber Pellet Pistol is a nice overall low cost target pistol with a very modern look and Gas Piston technology. In terms of performance the Gamo P900 IGT .177 Caliber Pellet Pistol tested well for me shooting accurately with a consistent 300 fps velocity which is what you want in a target pistol, consistency over raw power. I like the overall design and look, the Gamo P900 IGT .177 Caliber Pellet Pistol feels good in the hand and easy to shoot, the trigger is not overly light but is also not too heavy by any means. My only complaint is the cocking effort involved because of such a short barrel and I also noticed a bit of a stickiness with the cocking effort but I have a feeling this may break in over time or perhaps a drop of oil in the hinge area may do the trick. If you want a modern looking target pellet pistol with good performance than the Gamo P900 IGT .177 Caliber Pellet Pistol will for sure fit the bill!
My Table Top Review for the Gamo P900 IGT .177 Caliber Pellet Pistol:
For this Field Test Shooting Video Review of the Gamo P900 IGT .177 Caliber Pellet Pistol I test the power and accuracy to determine what the real world (fps) Feet Per Second velocity and how tight of a grouping I can get for 30 feet down range.
For the power portion of my Indoor Filed Test I shot five RWS 6.9 grain lead pellets through my Chronograph with an average velocity of 305 fps. This resulted in a 1.43 foot pound energy rating. My slowest shot out of the Gamo P900 IGT .177 Caliber Pellet Pistol was 289 fps and the fastest shot was 311 fps. Gamo claims the Gamo P900 IGT .177 Caliber Pellet Pistol can achieve 400 fps but this would be using lighter alloy pellets like PBA Platinum pellets.
Next I setup at a fresh paper target 30 feet down range and proceeded to place 8 shots into the target using a seated and rested shooting position. My first shot was a bit high as I was getting use to the trigger but the following 7 shots all grouped within about 3/4 of an inch, 6 of them all within a half inch of each other so the Gamo P900 IGT .177 Caliber Pellet Pistol is for sure capable of 1/5 inch groupings from a 30 foot distance. The placement of the shots grouping was a little bit high and to the left. since the Gamo P900 IGT .177 Caliber Pellet Pistol has an adjustable trigger for windage I could easily center the grouping right in the middle. In terms of elevation there is no adjustment so I would need to manually adjust this on the fly depending on the distance I was shooting at.
The Gamo P900 IGT .177 Caliber Pellet Pistol performed very well for me, the power is what you would expect for a target pistol, I would not recommend the Gamo P900 IGT .177 Caliber Pellet Pistol for any pest control. Accuracy was very good and I feel once getting use to the trigger you shoudl be able to get shots all within a 1/2 inch at 30 feet. The trigger is not super light but by no means is it heavy, the take-up is short with a predictable release, I found the trigger to work well overall. My only complaint is cocking the Gas Spring as the barrel is short and it does take some effort to do this, especially getting it started off, once you get past the first little bit it does get easier to cock. If you’re looking for a nice accurate target pellet pistol at a relatively inexpensive price point then for sure consider the Gamo P900 IGT .177 Caliber Pellet Pistol.
Type: BB Rifle. Manufacturer: Crosman. Model: R1 AR. Materials: Metal & plastic. Weight: 6 pounds (2.7 kilograms). Length: 26.25 / 29.25 inches (Stock closed / extended). Propulsion: 12 gram CO2 dual cartridges. Action: Blowback - single action only. Ammunition Type: 4.5mm steel BB's. Ammunition Capacity: 25 rounds. FPS: 430fps. Rate of Fire: 1400 rounds per minute in full auto
Trigger Pull: The trigger pull on the Crosman R1 CO2 Blowback BB Machine Gun is single action only since the charging handle must be cocked first before you can shoot it. The trigger is short and fairly light as you would expect from an AR type trigger action. The real fun happens with the Crosman R1 CO2 Blowback BB Machine Gun when you switch it over to full auto mode and with just one pull and hold of the trigger you empty the 25 round magazine in mere seconds.
Build Quality: The Crosman R1 CO2 Blowback BB Machine Gun is well made all around. Weighing in at 6 pounds without any add on accessories it feel solid and well built. There is a lot of metal going on inside and out of this rifle but keep in mind the top and bottom receiver are plastic with metal parts where they need to be like in the internals, pretty much all the working parts are metal, the magazine is full metal, the buffer tub is metal, charging handle, selector switch, magazine release, bolt release, trigger and of course the barrel is metal.
Realism: The Crosman R1 CO2 Blowback BB Machine Gun is about as real as you are going to get in a CO2 Blowback AR/M4 styled Airgun. You can even take it apart and split the top and bottom receivers like the real steal version. The blowback action gives you some recoil but more importantly offers a true single action trigger and of course the full auto ability we all love. Almost all the working parts work like they would on a real AR / M4 other than the forward assist which is moulded into the receiver.
Pros:
Super realistic working M4/AR 4.5mm BB Rifle just like the otters Crosman Rifles in this lineup.
Full blowback operation with both semi and full auto shooting, can feel the blowback operation rocking the gun.
Great weight and feel to it.
Almost everything works exactly like the real steel version. (Charging handle, dust cover, bolt release, magazine release, selector switch…)
Duel CO2 full metal drop out magazine that holds the 25 4.5mm steel BB’s as well.
Adjustable and customizable AR butt stock.
Included red dot sight and ability to add pop-up iron sights.
Lots of rails of mounting additional cool hardware.
Removable flash hider that uses standard threading.
Cons:
Receiver is plastic but well made and does not compromise feel or weight since there is lots of metal throughout this gun.
No iron sights included.
Comments:
The Crosman R1 CO2 Blowback BB Machine Gun is really pretty much the same as the Crosman DPMS SBR and Crosman MPW with more or less Cosmetic changes. Like the Crosman MPW the Crosman R1 has an AR compatible Rear stock and pistol grip, the Crosman R1 CO2 Blowback BB Machine Gun is the only Crosman AR Full Auto CO2 BB Rifle that has the ability to change out the flash hider, you can even put a mock suppression or in it if you choose to. No matter which of the Crosman AR Full Auto CO2 BB Rifles you chooses to get they are mechanically every similar and share most of the same parts. I would say the Crosman R1 CO2 Blowback BB Machine Gun is the most customizable to date but they are all fantastic Air Rifles!
My Table Top Video of the Crosman R1 CO2 Blowback BB Machine Gun:
Here we are with yet another Crosman AR styled Full Auto Blowback CO2 BB Rifle and they just keep getting better, I say that lightly as even the first version the Crosman DPMS SBR still holds up to the 3 part lineup. It kind of has to since all three of them can be mixed and matched in terms of the uppers and lowers, magazines and I am sure most intern parts. Check out the Crosman DPMS SBR and the Crosman MPW for reference as I have made full table top and field test shooting videos for them already.
The purpose as always for my Field Test Shooting Videos is to find out how the airgun being reviewed performs in terms of velocity and accuracy, and if the ratings on paper end up being the same or close to the tested results. Crosman claims the Crosman R1 CO2 Blowback BB Machine Gun is capable of shooting 5.1 grain 4.5mm Steel BB’s at up to 430 fps. When I tested the Crosman R1 CO2 Blowback BB Machine Gun using my Chronograph averaging out 5 shots using a brand new set of CO2 cartridges I averaged 395 fps. Note the temperature in my Indoor Airgun Sea Can Shooting Range was about average at about 24 degrees Celsius or right around 75 degrees Fahrenheit. Comparatively I was able to get 405 fps from the Crosman DPMS SBR and around 385 fps with the Crosman MPW. Temperature may have beene slightly different on those testing days so that needs to be factored in.
Moving on to the accuracy portion of this Field Test Shooting Review for the Crosman R1 CO2 Blowback BB Machine Gun, I placed 10 semi auto shots on my paper target setup 30 feet downrange. I was using a rested and seated shooting position to help minimize human factor. I was able to get pretty much a 1 inch grouping with my 10 semi auto shots which was nit surprising as I have been able to get tight shot placement like this from the Crosman AR series before.
I then flipped the Crosman R1 CO2 Blowback BB Machine Gun semi auto selector switch to full auto and dumped the remaining 10 rounds into my paper target in full auto mode flowed by another full 25 round magazine again in full auto and the grouping only stretched out to about 2.5 -3 inches even with all the full auto vibrations and rocking around of the gun. Shot placement was a little bit high and to the left but this can easily be corrected using the red dot sight adjustments.
In summary the Crosman R1 CO2 Blowback BB Machine Gun performed a lot like the Crosman DPMS SBR and the Crosman MPW which makes since since all of them are virtually mechanically the same. In the end I think it really comes down to which of the Crosman AR type full auto BB rifles you like the look of since they areal very capable shooters. If you can’t decide then maybe get one of each :)
Starting with my Chronograph velocity testing for the Sig Sauer MCX ASP .177 Caliber CO2 Pellet Rifle, I used a brand new Sig branded 90 gram CO2 cartridge along with 6.9 grain RWS pellets. The temperature was 24 degrees Celsius (75 degrees Fahrenheit) in the Sea Can Indoor Airgun Shooting Range. Sig claims the Sig Sauer MCX ASP .177 Caliber CO2 Pellet Rifle to shoot up to 5.7 Joules. My Chrono testing resulted in an average fps of 418 with the 6.9 grain lead pellets which yielded a 3.7 Joule (2.7 foot pound) power output. I was not expecting 5.7 joules as that would have been closer to 600 fps using 6.9 grain pellets.
Next I setup a fresh paper target 30 feet down range and using seated and rested shooting position I placed 10 rounds into the target. The Sig Sauer MCX ASP .177 Caliber CO2 Pellet Rifle shot a decent 1.5 inch 10 round grouping but I am pretty sure I can get better results once I find the right pellet, I have found this especially to be true with Sig Air Rifles. My MCX Virtus was able to get 1/2 inch groupings at 50 feet once I found ammo it liked and my MPX also shot a bit tighter form 30 feet out with a different ammo selection. I then unload the remaining 15 rounds in to the target rapid fire, followed by another 30 round full magazine and the grouping only stretched out a little bit, closer to 2 inches. Shots placed on the target a little bit low and to the right but this can be easily corrected for consistent bullseyes using the fully adjustable sights.
The Sig Sauer MCX ASP .177 Caliber CO2 Pellet Rifle performed well for me in general, I did find that occasionally the belt did not index resulting in a misfire (no pellet fired) but the next pull of the trigger would index the belt resulting in a pellet firing, there where no jams and all rounds from the belt where fired. I am not sure why this happened as this did not happen to me with my other Sig Sauer Air Rifles. Perhaps I short triggered it a bit not getting a full belt index. I know many of you have been waiting for a Canadian version of the Sig Sauer MCX ASP .177 Caliber CO2 Pellet Rifle, now that we have them in the All Black Iron Sight Version and FDE Red Dot Version, make sure to get one as once we run out I am pretty sure we will no longer be able to get these Canada Import Legal Sig Sauer MCX ASP .177 Caliber CO2 Pellet Rifles.
Watch my Preview Video where I take a quick look at the Sig Sauer MCX CO2 Pellet Rifle and Crosman R1 Full Auto BB Rifle. Full Table Top and Field Test Shooting Videos coming soon.
As always I like to test each gun out in the Replace Airguns Indoor Sea Can Airguns Range first placing 5 rounds through my Chronograph to find out the real world velocity of each test gun, then I shoot 10 rounds at a distance of 30 feet onto a paper target to see how tight of a grouping I can get shooting from a seated and rested position. When it come to full auto BB guns like the Umarex Legends M1A1 Blowback CO2 BB Machine Gun, I will usually switch up to full auto and dump the rest of the magazine to see if I can still sray on target with the remaining rounds.
For my Power or Velocity test I was using fairly new CO2, I had shot a full magazine a couple days before but the Umarex Legends M1A1 Blowback CO2 BB Machine Gun was all warmed up and ready to perform optimally. Umarex does state that it will shoot around 435 fps and with my 5 shot test I was able to confirm that with a 434 fps average. The temperature in the Sea Can was around 23 degrees Celsius or 73 degrees Fahrenheit.
For my accuracy test I setup a new paper target 30 feet downrange and proceeded to place 10 shots into it using the peep sights on the Umarex Legends M1A1 Blowback CO2 BB Machine Gun. Other than one slight flyer my 10 round grouping was around 3/4 of an inch and just a tad low of the bullseye but pretty close. I then switched over to full auto fun mode and with the remaining BB’s I unloaded all 20 rounds in about a half a second, or at least it seemed like that! The Umarex Legends M1A1 Blowback CO2 BB Machine Gun even in full auto mode with the trigger matted till the gun ran out I was still able to get a 2 inch grouping!
I’m a big fan of the Umarex Legends Series BB Guns and the Umarex Legends M1A1 Blowback CO2 BB Machine Gun may be my favorite out of all of them to date. The Thompson M1A1 is just such a stand out Machine Gun we all know from the Mob shows. Not only does the Umarex Legends M1A1 Blowback CO2 BB Machine Gun look the part but it performs I would have to say so far the best when it comes to Full Auto Machine guns at least from Umarex. I do have to say that the Crosman CO2 BB AR Series does not disappoint. That said if you are looking for a more classic BB Machine Gun that performs as good as it looks then my advice is grab yourself one of the Umarex Legends M1A1 Blowback CO2 BB Machine Gun and add it to your collection.
Type: Air Rifle / Machine Gun. Distributer: Umarex Model:Legends M1A1. Materials: Mostly Metal build. Weight: 7.75 pounds (3.5 kilograms) Barrel: 12 inches - smooth bore steel. Propulsion: 2x12 gram CO2. Action: Internal BoltBlowback single action. Ammunition Type: 4.5mm Steel BB's. Ammunition Capacity: 30 round full size drop out magazine. Max FPS: 435.
Trigger Pull: The trigger pull on the Umarex Legends M1A1 Blowback CO2 BB Machine Gun is single action only so you will need to charge the bolt for the first shot just like you would on the real steel Thompson M1A1, after that the blowback operation will charge the bolt which allows for semi and full auto shooting. Trigger pull is not very long or heavy.
Build Quality: The Umarex Legends M1A1 Blowback CO2 BB Machine Gun is pretty much all metal other than the stock and pistol grip. Pretty much everything that is black is going to be metal on this CO2 airgun. It weighs in at a hefty 7.75 pounds which is lighter than the real steel version by about 2 pounds but keep in mind the simulated plastic wood grips are a much lighter than real wood would be. Overall the fit and finish is really good, mechanical parts work well and seem to be well machined..
Realism: The Umarex Legends M1A1 Blowback CO2 BB Machine Gun is a 1 to 1 replica of the real steel World War II Thompson M1A1 Machine Gun and is very authentic looking with similar operation. Even the magazine holds 30 rounds just like the real steel Thompson M1A1. The blowback operation will give you a little bit of that shoulder tap but of course nothing like a 45 caliber M1A1. As expected in todays Replica Airguns the barrel is recessed to give it a larger opening and the CO2 screw is hidden well enough. I would like to see at least a real wood kit for the Umarex Legends M1A1 Blowback CO2 BB Machine Gun which would not lonely look even better but also increase the overall weight closer to the 10 pound real steel weight.
Yet another Classic Legends Replica Airgun from Umarex, maybe one of the best to date.
Mostly all metal design with good overall weight.
Semi and Full auto select-ability.
Dual CO2 design for increased shots and less cool down effect.
High capacity 30 round full size drop out metal magazine.
Umarex went with less rounds to get away from the double stay configuration of the 50 round Legends MP40 which was not always dependable.
Great looking replica of the real steel M1A1 in looks, operation and feel.
Internal bolt blowback will give a bit of recoil feedback feel.
Simulated wood looks very realistic.
Recessed barrel for added realism.
Cons:
Real wood hardware would have been cine and added it of additional weight. Maybe Umarex will offer this down the road?
Price is getting up there a bit but still worth it if you are an M1A1 fan, imagine what a real one would cost?
Going to eat up CO2 quickly in full auto mode but you can always switch over to semi auto.
Comments: Another great Legends product from Umarex, maybe even the best one so far. The only issues I had with the Umarex Legends MP40 was the double stack magazine feeding dependability with the 50 round double stack magazine not always feeding consistently. Umarex went back to a less aggressive closer to a single stack magazine on the Umarex Legends M1A1 Blowback CO2 BB Machine Gun which has a fewer rods but is expected to feed more consistently. I am looking forward to getting out and actually shooting the Umarex Legends M1A1 Blowback CO2 BB Machine Gun when I make my Field Test Shooting video. My advice right now with uncertainties about if and when we will get new inventory is buy now if you are in a position to as I am not sure how long they will last and when we will be able to get more stock.
My Vimeo Table Top Review of the Umarex Legends M1A1 Blowback CO2 BB Machine Gun:
I want to thank David Bitkowski from Rx Target Systems for providing me with this sample unit to share with the Replica Airguns community. This video is only a Preview video as I wanted to get the RX Target System out there before I follow up with my actual Table Top and Shooting Videos for it.
For now here are some of the key points I want to get out to everyone:
Mission: Rx Target Systems are meant to bridge the gap between firearms and airguns. They allow high precision shooting on a reactive, three- dimensional, rugged target that can be carted around in a back pack. What makes Rx Target Systems unique is that it is a system. It is so modular and adaptable with interchangable faceplates and paddles. Rx Target Systems are not going to break or get dented or dissembled on the range as many of the lighter gauged steel targets on the market today vs today’s high powered airguns.
Modular
One base allows interchange of faceplates for different target configurations
One threaded axel allows interchange of paddle from 10 gauge to 3/8 inch-thick paddles
Portable
Mount it on a shelf indoors
Mount it on a sawhorse outdoors
Carry it in a backpack or duffle bag- its 10 pounds
Rugged
Solid steel design
Faceplates from 10 gauge to ¼ inch thick
3-Dimensional
Faceplate is offset from paddles
Clipping the aperture does not guarantee a score
Intentions of target configurations
Standard 1 inch bulls.- represents kill zone of many small game at 30 yards, great for sighting in prior to the hunt. Also is ¼ scale of bull used in rapid fire pistol when shot from 8.3 meters. (25 meters distance/100mm bull)
1.2 inch bulls- represents the 4-10 ring of the NRA 10 meter air rifle target. Gears the shooter to consistently hitting the “black” of that target on paper
AAFTA style- represents common kill zones found in American Airgun Field Target Assosciation using 1.5”, 1”, ¾", ½", and 3/8”.
WFTF style- represents common kill zones found in World Field Target Federation using 15mm, 25mm, and 38mm apertures
10-15- Inspired by customer request, uses 10mm and 15mm apertures. High-Precision shooting.
The expectation is going to be high with the Sig Sauer ASP Super Target .177 Caliber Pellet Pistol since it is called the “Super Target” right! In terms of 350 fps well I guess it’s not really anything to wright home about but for a target pistol this velocity is more than enough. What matters most is consistency of each shot as that can effect the trajectory which in tern will effect the elevation of each shot. At the end of the day with a Target Shooter like the Sig Sauer ASP Super Target .177 Caliber Pellet Pistol what I’m really looking for is consistency.
Let’s start with the Chronograph portion of my Indoor Field Test Shooting Review for the Sig Sauer ASP Super Target .177 Caliber Pellet Pistol. Sig Sauer says I will get around 350 fps and spoiler alert I got exactly 350 fps shooting a 3 shot string. I only shot 3 rounds since all shots where very close together at 353, 347 and 350 fps. Remember what I was saying about consistency, that’s pretty consistent. I was using Sig Sauer Wad Cutter Lead pellets for all of my testing and since the Sig Sauer ASP Super Target .177 Caliber Pellet Pistol is not a CO2 Airgun room temperature was not a factor.
Moving on to the accuracy portion of my testing for the Sig Sauer ASP Super Target .177 Caliber Pellet Pistol. I was originally going to shoot 10 rounds but decided to go with 5 since between shots I need to open the Airgun, place a pellet in the barrel and then close and cock the Sig Sauer ASP Super Target .177 Caliber Pellet Pistol. I then need to reset my hand position on the sand bag and place another shot on target. All of this really breaks up the shooting rhythm which makes it a bit harder to be as consistent when compared to simply pressing the trigger between shots. I was shooting 30 feet away from my paper target using a seated and rested shooting position. It’s kind of hard to say exactly how tight my grouping was since the paper ripped a bit but looking back later at the video I am pretty sure all of the shots where pretty much on top of each other getting under a 1/2 inch grouping. The ripping of the paper made it look like the grouping was larger than it was.
Type: Pellet Taget Pistol. Manufacturer: Sig Sauer ASP Model: Sig Sauer ASP Super Target Materials: Metal and Wood build. Weight: 2.1 Pounds (953 grams). Barrel: 7.5 inch steel rifled. Propulsion: Single-shot over-lever single-stroke pneumatic. Action: Single action 2-stage adjustable trigger. Ammunition Type: .177 caliber pellets. Ammunition Capacity: 1 round. FPS: 350.
Trigger Pull: The single action only trigger pull on the Sig Sauer ASP Super Target .177 Caliber Pellet Pistol is fantastic right out of the box. I personally felt no need or desire to tamper with it as the trigger is crazy short and very light. That said if you feel the need to play around with the trigger adjustments you can as the ASP Super Target has a 2-stage adjustable trigger.
Accuracy: So far I have not done my official Field Test Shooting Video for the Sig Sauer ASP Super Target .177 Caliber Pellet Pistol , I did crack a few free standing shots down range in my Indoor Airgun Sea Can Shooting Range and was impressed with not only the trigger feel but how peppy the ASP Super Target felt. Sig claims a 350 fps velocity using lead .177 caliber pellets but I got the feeling they may have been moving faster than that? In terms of accuracy I was not shooting rested so it’s hard to say but I am expecting the Sig Sauer ASP Super Target .177 Caliber Pellet Pistol to be a tac driver for the price that you will pay for one!
Build Quality: The build quality for Sig Sauer ASP Super Target .177 Caliber Pellet Pistol is good, it feels solid and well made, the finish is also good but I did notice a slight casting imperfection on the front sight. I have found with Italian made Airguns they can sometimes have a few finishing flaws but overall they are mechanically very well made which is more important at the end of the day, but still for just under $500 Canadian I think this Precision Target Air Pistol should be near perfect!
Realism: The Sig Sauer ASP Super Target .177 Caliber Pellet Pistol is designed after the Sig Sauer P210 9mm Pistol with some liberties taken to accommodate the single-stroke pneumatic internal pump and reservoir. For this reason it is not exactly a 1 to 1 scale replica of the Sig Sauer P210 but it is fully Sig Sauer licensed and looks close enough for what it is at the end of the day.
Pros:
Pretty much all metal and wood construction.
Fully adjustable rear sight as you would expect from a precision target pistol like this one.
Light 18 pound single-stroke cocking effect.
Sig Sauer Lisenced.
Made in Italy.
Comes in a nice hard shell Sig branded case.
Single action trigger is fully adjustable and feels amazing.
Claimed fps of 350 felt to me to be conservative, maybe we will see a little bit more out of the ASP Super Target?
Ambidextrous design suitable for left and right handers.
Cons:
A bit on the expensive side so it may be out of budget for some.
Not a true replica which is kind of expected as this is not a CO2 based airgun.
I found loading pellets in the barrel a bit tuff as it is recessed and harder for large fingers to access but loading got better as I used it.
Comments:
The Sig Sauer ASP Super Target .177 Caliber Pellet Pistol is not going to be for everyone as it is on the high end and out of the price range of most. If you do have the budget for a high quality Precision Target Air Pistol and you are wanting it to look more like a traditional Real Steel Gun rather than an Air Target Pistol, then The Sig Sauer ASP Super Target .177 Caliber Pellet Pistol is probably the most authentic looking option out there. I am really hoping it performs amazing during my Field Test Shooting Review so we can all justify the kind of up there price point.
My Table Top Review of the Sig Sauer ASP Super Target .177 Caliber Pellet Pistol:
I have two new products from Sig Sauer Airgun devision to share with everyone here on the channel. They are both really different but I really like them both. Before I get into it I want to thank Sig Sauer for sending me both of these Airguns.
First up is the Sig Sauer MCX Virtus .22 Caliber PCP Air Rifle I showed y at SHOT Show this year. Well now it’s shipping and I have one :) At this time the only version of the Sig Sauer MCX Virtus .22 Caliber PCP Air Rifle is the 700 fps 12 not popguns version. This version is legal in Canada but you will need an unrestricted Firearms License since it falls under the definition of a non-centered fired long gun in the Canadian Firearms Act. Perhaps Sig Sauer will come out with a detuned version under 500 fps?
The Sig Sauer MCX Virtus .22 Caliber PCP Air Rifle uses a 13CI-3000PSI tank situated at the rear of the gun as part of the butt stock. You will need some sort of a pump or scuba pressurization system to refill the PCP tank which will get you up to 150 to 200 shots per fill up. The belt fed magazine holds 30 rounds which you can fire as fast as you can pull the semi auto trigger. By the way the trigger pull indexes the belt magazine while the PCP air pressure works the bolt allowing for a fairly smooth trigger pull. You will need to charge the Sig Sauer MCX Virtus .22 Caliber PCP Air Rifle before you start shooting.
The Sig Sauer MCX Virtus .22 Caliber PCP Air Rifle weighs in at 7.5 pounds, has a 17.5 inch barrel and a total length of 37.5 inches.
Unfortunately the microphone system I was using for some reason did not record the Lapel Microphones we where record the audio with for this ASG SHOT Show 2020 Interview Video. The Camera we where recording video with did record audio but as there is so much back ground noise going on at large show like this, the audio is far from good. That all said try do you your best to listen to what we are discussing. There are sections where the audio is fairly distinguishable and sections in the video that are not due the proximity of the camera.
Bob from ASG and I go over serval products for ASG at SHOT Show 2020 this year. We first take a look at the new ASG Shadow 2 CO2 Blowback BB Pistol. One interesting fact about the new ASG Shadow 2 is that it has an internal Hop-up system that help BB’s travel further out for longer range shooting. The ASG Shadow 2 also has a fully adjustable rear sight making this Blowback CO2 BB Airgun a potentially pretty decent target pistol.
Another new product from ASG we focused on is the Airsoft ASG B&T Universal Service Weapon designed for first responder situations. The ASG B&T USW has an extended rear frame allowing for a non-recipricating red dot sight placement. The ASG B&T Universal Service Weapon has a built in folding stock and you can trick it out with all kinds of add ons to make it your own.
Near the end of the video we took a look at some new ICS Airsoft offerings from ASG.
This isn’t a SHOT Show 2020 Interview but most certainly worth reporting on. While walking around SHOT Show I ventured into the Chiappa Booth as I own a .22 caliber 1911 styled pistol from them and they do have some interesting products to take a look at.
Then I saw a red tip on one of their Chiappa Rhino Revolvers which caught my eye since I was not aware that Chiappa was making an Airgun version of their Rhino. Well as it turns out they are hoping to be shipping both an Airsoft version and Steel BB version around spring time and from what I can tell there will be two finishes, a kind of Gold Satin finish and also a Back finish version. As is with a lot of revolvers these days they will be shell loading which will help them look the part of a real steel Chiappa Rhino Revolver.
Looking forward to getting my hands on one when they come out in Spring this year!
In this SHOT Show Las Vegas 2020 Interview Video Scott takes us through a range of new products from Air Venturi.
Scott and I talk about the Air Venturi TR5 and how it came about to fill the hole the Baikal MP-61 left behind. We also talk a look at some new Air Rifles, a pumper called the Butterfly with a super cool linkage based system that makes pumping a lot easier. A PCP side lever cocking Air Rifle that I’m not even sure has a name yet but will be available in .177 .22 and .25 caliber pellet for around $299 US.
The only Air Venturi replica we looked at is a new Springfield Armory under lever Spring Piston Air rifle modeled after the M1A. Last up Scott went showed us how the Bada Bang targeting system is shaping up and looks to be almost ready for production.
