I have two new products from Sig Sauer Airgun devision to share with everyone here on the channel. They are both really different but I really like them both. Before I get into it I want to thank Sig Sauer for sending me both of these Airguns.
First up is the Sig Sauer MCX Virtus .22 Caliber PCP Air Rifle I showed y at SHOT Show this year. Well now it’s shipping and I have one :) At this time the only version of the Sig Sauer MCX Virtus .22 Caliber PCP Air Rifle is the 700 fps 12 not popguns version. This version is legal in Canada but you will need an unrestricted Firearms License since it falls under the definition of a non-centered fired long gun in the Canadian Firearms Act. Perhaps Sig Sauer will come out with a detuned version under 500 fps?
The Sig Sauer MCX Virtus .22 Caliber PCP Air Rifle uses a 13CI-3000PSI tank situated at the rear of the gun as part of the butt stock. You will need some sort of a pump or scuba pressurization system to refill the PCP tank which will get you up to 150 to 200 shots per fill up. The belt fed magazine holds 30 rounds which you can fire as fast as you can pull the semi auto trigger. By the way the trigger pull indexes the belt magazine while the PCP air pressure works the bolt allowing for a fairly smooth trigger pull. You will need to charge the Sig Sauer MCX Virtus .22 Caliber PCP Air Rifle before you start shooting.
The Sig Sauer MCX Virtus .22 Caliber PCP Air Rifle weighs in at 7.5 pounds, has a 17.5 inch barrel and a total length of 37.5 inches.
In this SHOT Show Las Vegas 2020 Interview Video Scott takes us through a range of new products from Air Venturi.
Scott and I talk about the Air Venturi TR5 and how it came about to fill the hole the Baikal MP-61 left behind. We also talk a look at some new Air Rifles, a pumper called the Butterfly with a super cool linkage based system that makes pumping a lot easier. A PCP side lever cocking Air Rifle that I’m not even sure has a name yet but will be available in .177 .22 and .25 caliber pellet for around $299 US.
The only Air Venturi replica we looked at is a new Springfield Armory under lever Spring Piston Air rifle modeled after the M1A. Last up Scott went showed us how the Bada Bang targeting system is shaping up and looks to be almost ready for production.
This year at SHOT Show 2020 Mark from Umarex had a nice variety of new product to go over with us. Mark first went over the new CO2 Blowback Pellet firing Glock 17 which has a similar magazine and loading system as the Umarex SA10 Pellet Pistol.
We then took a look at another Glock replica, the Glock 18C Full Auto GBB Airsoft pistol with extended magazine, this one is sure to be a lot of fun with its selectable full auto feature and high capacity magazine. Perfect for hammering targets downrange or used as a very capable backup Airsoft pistol in the field.
Probably one of my favorites at the Umarex Booth this year was the Umarex Thompson M1A1 Legends Series CO2 Blowback Machine Gun. And yes it’s full auto capable along with blowback operation and a full size drop metal magazine that holds the CO2 and Steel BB’s. A nice addition to the Legends series of Pistols and Rifles.
Something really different this year for Umarex are the AirJavelin and AirSaber, two arrow firing rifles, the AirJavelin is CO2 powered and more tactical looking but still has more than enough power to shoot medium sized game, great for pest control while the bigger and (480 fps 178 foot pound) more powerful AirSaber is PCP powered and can be used for larger game like deer and wild bore. And it even looks like we will be selling these Arrow firing rifles in our Canada Replica Airguns Store with no PAL firearms license required!
This year Sig Sauer was showcasing their Airsoft Pistols with a new line called the Proforce series geared towards high end training. Sig has also included new Reflex Red Dot Sights that can be ordered already on the gun or as an add on accessory. The Proforce Pistol line includes both the M17 and M18 series Sig Sauer pistols.
Last year at SHOT Show 2019 Sig had introduced their Virtus .22 Caliber PCP Semi Auto Rifle but it was not ready at that time. Well now the Sig Sauer Virtus is ready to ship and yours truly will be getting one of these bad boys for review! Since the .22 caliber PCP Sig Sauer Virtus shoots around 700 fps with a 12 foot pound energy level you will need a PAL firearms license if you live in Canada but the Sig Sauer Virtus is a considered a “long gun” so no registration will be required in Canada.
Watch my Sig Sauer SHOT Show 2020 Las Vegas Interview for more info and cool stuff presented by Stephanie from Sig Sauer.
Here we go again, another round of SHOT Show videos brought to you direct from Replica Airguns!
As always I like to start off with a Teaser Video with a few quick clips of some of the new products I had the opportunity to take a look at at this years SHOT Show 2020 Las Vegas.
I will be rolling out Interview Videos as quickly as I can edit them and put them together for the following Airgun Related companies:
Sig Sauer
Umarex
Crosman - Velocity Outdoors
ASG
Air Venturi
Chiappa
So sit back and enjoy this years Replica Airguns SHOT Show 2020 Las Vegas Teaser Video!
I have not officially done a Field Test Shooting Video for the Umarex Legends CO2 BB Lever Action Cowboy Rifle other than my quick outside shooting test where I simply shot a bunch of rounds at some pop cans just to see how the Umarex Legends CO2 BB Lever Action Cowboy Rifle would work for me and it did perform well during that test.
Jumping ahead to a little while later when I went to make my Official Field Test Shooting Video for the Umarex Legends CO2 BB Lever Action Cowboy Rifle. I found it was not performing well at all, shooting well under the 410 claimed fps closer to 200 fps which was a surprise since it seemed to do a lot better for me on my previous test. I even changed out the CO2 but still did not get any better results. I racked this up to maybe being a defective gun and so I went about getting my hands on another Umarex Legends CO2 BB Lever Action Cowboy Rifle.
Guess what? Same thing with rifle number two. Very poor fps, again almost half of the claimed rated velocity. So at this point I decided I was goring to make the Field Test Shooting Video for the Umarex Legends CO2 BB Lever Action Cowboy Rifle and let the results speak for themselves… I also thought it would be fun to compare it to the Classic 1938 Daisy Red Ryder BB Gun since I figured they would both get similar fps and accuracy and be rather comparable at the end of the day.
I do have to say that the Umarex Legends CO2 BB Lever Action Cowboy Rifle did make me eat my words and I am happy it did since I really like the Umarex Legends CO2 BB Lever Action Cowboy Rifle and wanted it to do well!
Usually I state all there results for My Field Test Shooting Videos here in the written article but I kind of feel it is best if you just watch this one from start to finishes since the video result s did turn out to really surprise me in the end.
Make sure to watch my Table Top Review Video if you want more info on the details and specifications for the Daisy Powerline 5170 CO2 BB Pistol! in this Field Test Shooting video I test out the Daisy Powerline 5170 CO2 BB Pistol inside the Replica Airguns indoor Sea Can Airgun Range to see how well it performs in terms of Velocity and Accuracy. The temperature was 20 degrees Celsius (68 degrees Fahrenheit) so not too hot or too cold on this test day. I was also using a brand new CO2 along with 5.1 grain RWS zinc coated steel BB’s.
For the first test to find out what the actual velocity is for the Daisy Powerline 5170 CO2 BB Pistol, I placed 5 rounds through my Chronograph back to back and I was able to get an average of 456 fps with the fastest shoot hitting 460 fps and the slowest shot in the string hitting 451 fps. All within 9 fps of each other so very consistent.
Next I setup a fresh paper target 30 feet down range and proceeded to do my best to obtain a 10 shot grouping using a seated and rested shooting position. Most of the shots form the Daisy Powerline 5170 CO2 BB Pistol where all under 1.5 inches apart, just a little bit high and slightly to the left. I did get a flyer that went a little bit lower than the rest lengthening out the 10 shot grouping to about 2 inches in diameter. I am pretty sure I would be able to get a 1 inch grouping with the Daisy Powerline 5170 CO2 BB Pistol after some practice.
Overall the Daisy Powerline 5170 CO2 BB Pistol performed well for me shooting consistently without any issues. The Daisy Powerline 5170 CO2 BB Pistol is fairly basic in design but does have the added much suppressor that allows for a longer inner barrel giving it a little more fps. You also have the removable sight rail fi you want to add some optical sights or perhaps a laser or tactical light or maybe all of them? Pickup the Daisy Powerline 5170 CO2 BB Pistol in a variety of colors over at the Replica Airguns Online Canada and US Stores!
Make sure to watch my Table Top Review Video if you want more info on the details and specifications for the Crosman P10 Wildcat CO2 BB Pistol Airgun Kit! in this Field Test Shooting video I test out the Crosman P10 Wildcat CO2 BB Pistol Airgun Kit inside the Replica Airguns indoor Sea Can Airgun Range to see how well it performs in terms of Velocity and accuracy. The temperature was 20 degrees Celsius (68 degrees Fahrenheit) so not too hot or too cold on this test day. I was also using a brand new CO2 along with 5.1 grain RWS zinc coated steel BB’s.
For the first test to find out what the actual velocity is for the Crosman P10 Wildcat CO2 BB Pistol Airgun Kit I placed 5 rounds through my Chronograph back to back and I was able to get an average of 396 fps with the fastest shoot hitting 404 fps and the slowest shot in the string hitting 389 fps. Interestingly enough the fastest shot was the last shot in my 5 shot string so CO2 cooling did not effect the Crosman P10 Wildcat CO2 BB Pistol Airgun Kit too much.
Next I setup a fresh paper target 30 feet down range and proceeded to do my best to obtain a 10 shot grouping using a seated and rested shooting position. I may have only loaded 9 rounds this time but I was still able to get a good idea on how well the Crosman P10 Wildcat CO2 BB Pistol Airgun Kit performs in the accuracy department. Most of the shots where all under 2 inches and well center on the target with at least 3 or 4 rounds in the bullseye. I did get a flyer that went rather high but we will assume there may have been a bad BB in the bunch shine I did not feel I pulled that shot at all and since the other rods all placed well together well will go with the smaller grouping of under 2 inches.
Overall the Crosman P10 Wildcat CO2 BB Pistol Airgun Kit performed well for me shooting consistently without any issues. The Crosman P10 Wildcat CO2 BB Pistol Airgun Kit is a very basic airgun with your standard double action trigger that will be on the longer side, that said it felt pretty good and was not overly heavy with a fairly predictable pull and release making it easy enough to find your target. Action shooting will be OK too since the trigger is not super heavy for a double action only trigger. Pickup the Crosman P10 Wildcat CO2 BB Pistol in a variety of colors over at the Replica Airguns Online Canada and US Stores!
We had a lot of great new Airguns that I reviewed this year at Replica Airguns. Some of them really stood out to me and so I made a video showing my Favorite Replica Airgun Picks of 2019. Of course there where many other Airguns that could has just as easily made this video but I had to draw the line somewhere and pick the ones that in my opinion where the best of 2019. Make sure to watch my Vimeo video where I go into some more details on why I liked each Airgun.
Below is a list of the top Replica Airgun Picks of 2019:
Type: Non-blowback CO2 BB Pistol. Manufacturer: Distributed by Crosman. Model:P10 Wildcat / Phantom. Materials: Plastic & metal. Weight: 1.1 pounds (500 grams). Barrel: Smooth bore barrel. Propulsion: CO2 x 1. Action: Semi auto non-blowback, double action only trigger. Ammunition Type: 4.5mm steel BB's. Ammunition Capacity: 20 round drop out plastic magazine. FPS: Claimed 480.
Trigger Pull: The trigger pull on the Crosman P10 Wildcat CO2 BB Pistol is typical of a Double Action Only Trigger and so you will expect it to be a longer medium to heavy pull. I’d say it’s more of a medium pull, it’s not going to be the fastest action shooter because of this but it will get the job done emptying the 20 round stick magazine quick enough. Like many of these lower cost basic CO2 BB pistols the barrel acts like the hammer in that it does protrude out of the barrel opening when you pull the trigger and snap back upon release.
Accuracy & Power: At this point I have not shot the Crosman P10 Wildcat CO2 BB Pistol so I can only quote what Crosman claims on their packaging in terms of velocity which is a peppy 480fps. We will have to see if this figure is close to the mark when I get to the Field Test Shooting Review for the Crosman P10 Wildcat CO2 BB Pistol, along with test results for accuracy at 30 feet downrange.
Build Quality: The Crosman P10 Wildcat CO2 BB Pistol is mostly all plastic with some metal internal parts where they need to be for strength and durability issues. The Crosman P10 Wildcat CO2 BB Pistol is basically two plastic halves put together with screws on the right side. This may not be the prettiest way to build a CO2 Airgun but it does work and keeps things simple, simple means there are a lot less things to go wrong which means you will have an airgun that is reliable for a long time.
Realism: The Crosman P10 Wildcat CO2 BB Pistol is not a replica of any specific real steel pistol in production but in my opinion it kind of looks like a hybrid of a Beretta and Sig merged together. Obviously the Blue and Pink versions are made to show they are not real steel guns but you can get the P10 in the all black Phantom version which will look more like a real gun. There are few moving parts on the Crosman P10 line of Airguns, just the trigger, safety and magazine release. All other parts are moulded into the plastic with no working slide or even hammer. The CO2 tab is well hidden by the grips but the barrel is not reassessed at all.
Blue and pink color scheme may ease some parents when buying a first BB gun.
High FPS rating.
Non-blowback will get more shots per CO2.
Comes with a generic nylon holster you can use with other airguns too .
CO2 tab is nicely hidden inside the grip.
Double action trigger pull is long but not too firm.
Should work with other similar styled magazines commonly found on lower cost BB pistols.
Assembled in the US.
Cons:
All plastic gun for the most part with just a few internal metal parts.
Not many working parts pretty much all moulded gun.
Grips fairly loose, don't really snap into place, could fall off easily.
Comments:
I’m not really a big fan of all plastic non-blowback airguns as I have made aware in many of my other videos. That said there is a place for Airguns like the Crosman P10 Wildcat CO2 BB Pistol for those looking to buy an Airgun not so much as a close replace but simply just to shoot at targets and have fun with. The Crosman P10 Wildcat CO2 BB Pistol will do just that very dependably while offering lots of shots per CO2 with a high fps, it should also get reasonable accuracy while doing so. Being able to get it in a variety of colors means you can personalize the Crosman P10 Wildcat CO2 BB Pistol a bit more and the blue and pink versions may be the deciding factor for some parents sitting not the fence on whether or not to allow their young adult or teenager to buy their first CO2 BB Pistol.
Another Field Test Shooting Video Review coming for the Replica Airguns Sea Can Indoor Airgun Shooting Range! In todays Shooting Review I test out the Schofield No. 3 CO2 BB-Pellet Revolver using both 4.5mm 5/1 grain Steel BB’s and .177 Caliber 6.9 grain Lead Pellets to see how well they perform in velocity and accuracy. As always I use a brand new CO2 for my velocity testing and for reference the temperature during my testing in the Sea Can was 23 degrees Celsius or 73 degrees Fahrenheit. For my accuracy portion of the shooting test I use a rested and seated shooting position shot 30 feet away from my fresh paper targets.
Starting off with the velocity or power potion of my Field Test Shooting Video for the Schofield No. 3 CO2 BB-Pellet Revolver. I first used the 4.5mm Steel BB shells and shot 3 rounds through my Chronograph averaging 369 fps. I then loaded up the Schofield No. 3 CO2 BB-Pellet Revolver with pellet shells and again placed three .177 caliber lead pellets through my Chrony and got a very similar result with an average of 361 fps. Keep in mind the lead pellets where 6.9 grain versus the steel BB’s at only 5.1 grain, so the lead pellets will be carrying more raw energy at the point of impact even though they where going just a tad bit slower than the steel BB’s.
In terms of accuracy both rounds performed about the same shooting at my paper target 30 feet away. Since the Schofield No. 3 CO2 BB-Pellet Revolver has a 6 round cylinder I shot 6 sounds for each test, 6 steel BB’s and then 6 lead pellets. I also changed the targets for each type of ammo between reloading. I found the Schofield No. 3 CO2 BB-Pellet Revolver shot fairly close to the bullseye, l but with both the Steel BB’s and lead pellets I got one outlier that spread out my groupings significantly, the other 5 rounds where all close being about 2 inches apart? Perhaps it was a bad or misshaped round, or maybe even me ;) I did notice the lead pellets seemed to have a really nice 4 round group out of the 6 that all fell within the bullseye. Hard to really say if BB’s or pellets performed better than the other one at least in my testing.
Overall the Schofield No. 3 CO2 BB-Pellet Revolver shot well for me, the trigger is nice and short and light making placing your shots easy, of course since it is a single action only trigger you kind of need to reset yourself between every shot which can effect groupings just a bit. Since the barrel is not rifled with no danger of damaging the rifling, you can really shoot what ever ammo type you feel like shooting or have on hand and since Schofield No. 3 CO2 BB-Pellet Revolvers get about the same speed and accuracy then it really doesn’t matter that much at the end of the day!
Type: BB/Pellet air revolver. Manufacturer/Distributor: Bear River. Model: Schofield No. 3 Materials: Mostly metal with plastic grips. Weight: 2.4 pounds. (1089 grams) Barrel: 7 inch (178mm) smooth bore barrel. Propulsion: 12 gram CO2. Action: Revolver, single action only. Ammunition Type: 4.5mm steel BB's and .177 Cal. Pellets. Ammunition Capacity: 6 rounds. FPS: 445fps.
Trigger Pull: The trigger pull on the single action only Schofield No. 3 CO2 BB-Pellet Revolver is what you would expect from a pistol of this design. Like the Colt Single Action Army the trigger pull is very short, light and crips, perfect for taking your time and getting a precise shot on target. You will of course have to cock the hammer manually before each shot ao no real action shooting.
Accuracy: I have not tested the Schofield No. 3 CO2 BB-Pellet Revolver in the Replica Airguns Sea Can Indoor Airgun Range but plan to get to it shortly. I will test out both 4.5mm Steel BB’s and some .177 caliber lead Pellets and see how the different ammo types effect both power and accuracy. Keep in mind the Schofield No. 3 CO2 BB-Pellet Revolver has a smooth bore barrel but I am pretty sure pellets will still perform well at 30 feet away.
Build Quality: The Schofield No. 3 CO2 BB-Pellet Revolver is built a lot like the Webley MK VI .455 CO2 Shell Loading Revolver line, perhaps even made in the same factory in Taiwan? The Schofield No. 3 CO2 BB-Pellet Revolver is pretty much an all metal construction other than the plastic grips and any internal seals. The fit and finish is excellent with a great overall weight in the hand. The pistol grips is a lot like what you have with the Colt Single Action Army pistol but the Schofield No. 3 CO2 BB-Pellet Revolver is a lot more front end heavy because of its beefy barrel.
Realism: In terms of replicating a real steel Schofield No. 3 CO2 BB-Pellet Revolver for sure looks and feels that part. The reassessed barrel and well hidden CO2 screw don’t give anything away that the Airgun version is not the real deal. But as with all of these shell loading Airgun Revolvers, the shells are actually closer to a .380 Caliber in diameter rather than a 45 which is what the real steel Schofield No. 3 CO2 BB-Pellet Revolver would be designed for.
If you are like a bulky revolver with good weight to it then the Bear River Schofield No. 3 is it.
Can shoot Steel BB’s or Pellets since it comers with both shell types.
Recessed barrel.
Well concealed CO2.
Shell loading design that loads from the back so no need to remove shells if you wish not to.
Single Action Only hammer and trigger action feel good, nice and light with short take-up and release.
Fairly discreet safety location right behind the hammer so easy to get at.
Super easy to load, pellet shells can even be reloaded with shells in the gun if you are using the pellet shells.
Really like the Nickel Finish on this gun.
Can get simulated Ivory grips for it if you prefer that look.
Cons:
Sights are not adjustable.
Warning instructions on side of the frame.
Barrel is not rifled for pellet use?
Only a Single Action Only Hammer and Trigger but true to the style of the gun.
Comments:
Yet another classic shell loading CO2 BB Revolver, and again the more the merrier in my option! I like that you get 12 shells with our kit version, 6 removable shells for 4.5mm Steel BB’s and 6 removable shells for .177 caliber Pellets. The Schofield No. 3 CO2 BB-Pellet Revolver is for sure a hefty revolver but the pistol grip is not super large so even people with smaller hands should not have a problem shooting the Schofield No. 3 CO2 BB-Pellet Revolver. The real problem is deciding which Shell Loading Airgun Revolver to buy now since we have so many to choose from… Classic or modern, nickel or black, or perhaps weathered?
My Table Top Review for the Schofield No. 3 CO2 BB/Pellet Revolver:
Here we have three very different products I Unbox and Preview for everyone. A Spring Piston multi-shot .177 Caliber Pellet Rifle, a single action BB/Pellet revolver that’s not a Colt! And a really nice looking Semi Auto Blank Pistol in a Chrome finish.
Let’s start with the Air Venturi TR5 Spring Piston 5-shot .177 Caliber Pellet Rifle. I think this is a really well thought out Air Rifle. It’s “almost a Bullpup” in design but it does actually load in front of the trigger just a bit, that said most of the spring piston is behind the trigger setup making it really compact yet with a longer than normal barrel compared to regular Break Barrel Spring Piston Air Rifles. The Air Venturi TR5 Spring Piston 5-shot .177 Caliber Pellet Rifle also has a side lever cocking mechanism along with a 5 round auto indexing magazine which makes it much quicker to cock and reload for fast follow-up shots, again compared to a standard Break Barrel Air Rifle, not to mention no barrel droop! The Air Venturi TR5 Spring Piston 5-shot .177 Caliber Pellet Rifle has a claimed fps of up to 500 so we are getting the max amount of velocity possible for our Canadian laws without making it a regulated firearm and requiring a PAL license. And by the way the Air Venturi TR5 Spring Piston 5-shot .177 Caliber Pellet Rifle does come in both a Lime Green and all Black version just in case you are not a fan of the Lime Green finish I show in this video.
Moving onto the Schofield No. 3 BB/Pellet 6 Shot Revolver Replica, if you like single action revolvers then take a look at the Schofield No. 3 BB/Pellet 6 Shot Revolver Replica. It’s a lot more bulky than a Colt Single Action Revolver and also has that top Break design that makes reloading quick and easy. The version we are selling inner Replica Airgun Online Store is the kit version that comes with 6 BB shells and 6 pellet shells so you can take your pick on ammo types. The barrel is not rifled so Steel BB’s will not hurt the Airgun and since pellets are skirted they do not need a rifled barrel to fly straight and true. You can expect around 445 fps for the Schofield No. 3 BB/Pellet 6 Shot Revolver Replica.
The Umarex T4E HDS Double Barrel .68 caliber CO2 Paintball Shotgun is a two shot short barrelled that could come in handy for CQB engagements but it looks to be designed also as a none lethal home defence weapon since you can load a CO2 without piercing it but when in a bind you simply hit the CO2 screw and it pierces the CO2 activating the gun for instant use. I will have to test this one out to see if it really has enough power to stop an intrude, after all you only get two shots so they better count!
Type: CO2 Bolt action pellet pistol. Manufacturer: Distributed by Webley. Model:Webley Nemesis. Materials: Metal & Polymer. Weight: 2 pounds (907 grams). Barrel: 6.25 inches metal rifled. Propulsion: CO2 x 1. Action: Bolt action repeater, single action only trigger. Ammunition Type: .177 / .22 caliber pellets. Ammunition Capacity: 14/ 12 round double sided rotary magazines. FPS: Claimed 430 / 370.
Trigger Pull: The trigger pull on the Webley Nemesis Bolt Action CO2 Pellet Pistol is rather good, there is just a little bit of take up with a light and crisp release. You will have to work the bolt to engage the internal hammer for single action only shooting.
Accuracy: This is one of those times when I actually have already done my Field Test Shooting Video for the Webley Nemesis Bolt Action CO2 Pellet Pistol and it performed well. My test version was the .177 caliber model with a claimed fps of 430 and I got exactly that with a 5 shot average sting on my Chronograph. I was using 6.9 grain lead pellets so not the lightest or heaviest pellets. I then placed 14 rounds into my paper target setup 30 feet down range and proceeded to get a 1.5 inch 14 round grouping. That’s with no previous time shooting this Airgun so I know it is for sure capable of sub 1 inch grouping with open sights. Keep in mind you can mount a laser, red dot or optical sight on this Airgun very easily for even better potential accuracy!
Build Quality: TheWebley Nemesis Bolt Action CO2 Pellet Pistol on the outside is pretty much an all plastic Airgun but it does have good weight to it at 2 pounds so there must be a fair amount of internal metal parts. The barrel and bolt for sure are metal! The plastic does seem very good quality with nice fit and finish throughout the Airgun.
Realism: The Webley Nemesis Bolt Action CO2 Pellet Pistol is not styled specially to look like any particular one gun but I have to say it does have an overall Glock look to it but in a much larger form factor. For a CO2 bolt Action Pellet Pistol it is fairly modern looking compered to other target styled pellet pistols out there. Available From: The Replica Airguns Store.
Pros:
First multi-shot rotary mag CO2 Pellet pistol I have come across.
Good accuracy and power!
Can add a red dot or optical sight to it using the top built in Dovetail rail.
Can add a laser or tac light using the bottom built in Weaver Picatinny rail.
Has a nice modern look to it for a target pellet pistol.
Rifled steel barrel.
Fiber optic sights adjustable for windage.
Nice light and short single action trigger.
Allen key and magazine storage compartment built into airgun.
Would be good for small pest control because of decent fps and good accuracy.
Cons:
Doesn’t like all pellet sections.
Sights are not adjustable for elevation.
Comments:
The Webley Nemesis Bolt Action CO2 Pellet Pistol is not really a Replica Airgun so to speak but it’s nice to shoot a dedicated target pellet pistol once in a while and the Webley Nemesis Bolt Action CO2 Pellet Pistol is that for sure but with a more modern and cool looking exterior than most. The Webley Nemesis Bolt Action CO2 Pellet Pistol is also one of the first bolt action Air pistols I have come across that has a rotary magazine which combined with decent power and accuracy could make it usable for small pest control since you do have quick follow up shots just in case the first shot doesn't get the job done. I will say the Webley Nemesis Bolt Action CO2 Pellet Pistol is a bit pellet picky especially if the skirting on your pellet choice is narrow. I would advise you to choose a more chunky pellet with a wider skirt which will make magazine indexing smooth and consistent.
The Webley Nemesis is a really interesting CO2 Pellet Pistol, so far I have not reviewed an Airgun like it. Yes I have reviewed bolt action CO2 Pellet Pistols in the past but not one with a rotary magazine for much quicker followup shots. This is by no means as quick as a semi auto shooter but being able to quickly work the bolt action without having to manually place a pellet in the breach area sure does speed things up.
On the box Webley claims up to 420 fps with the ,177 caliber version the Webley Nemesis is a really interesting CO2 Pellet Pistol I was testing and I was able to get an average of 430 fps using a brand new CO2 along with RWS 6.9 grain lead pellets. I did find the RWS pellets I was using did not feed all that well perhaps because they had a fairly narrow waist on them which does effect the way pellets are held in the rotary magazine. The temperature was fairly normal at right around room temperature.
For my accuracy portion of the Field Test Shooting Video for the Webley Nemesis is a really interesting CO2 Pellet Pistol, I switched to Sig Sauer .177 caliber lead pellets and they worked much better in terms of chambering cleanly for me. I found the Webley Nemesis is a really interesting CO2 Pellet Pistol shot a bit high on my paper target placed 30 feet away, so I set my sights on the bottom ring which placed almost all my 14 shots right in the bullseye. My 14 shot string was grouping around 1.5 inches but I am sure the Webley Nemesis is a really interesting CO2 Pellet Pistol could shoot quarter sized objects at 30 feet downrange all day long once you get use to it.
The trigger on the Webley Nemesis Bolt Action CO2 Pellet Pistol is one of the highlights of this air pistol, it really feels great. Combine this with nice high consistent fps and excellent accuracy and the Webley Nemesis is a really interesting CO2 Pellet Pistol is a great target shooter with potential for up close small pest control.
I keep getting more and more really cool airguns to review and it’s been hard to keep up with them all and get out Table Top and Field Test videos for each new product. I at least want to be able to get the word out so to speak for some of the new Airguns that come across my tassel even if I may not be able to get to their full reviews right away.
That said I have two new Airguns that we have in our Replica Airguns Stores to show everyone, the Webley Nemesis in .177 Caliber Pellet and the G&G GPM1911 GBB Airsoft Pistol. Both could not be any more different for sure but I really like each of them for their own reasons.
The Webley Nemesis is a very unique CO2 powered pistols since it is bolt action like many of the corpsman pistols but the Webley Nemesis .177 Caliber Pellet Pistol comes with a duel sided rotary magazine that holds 7 rounds on each side, the .22 caliber version holds 6 rounds on each side. The .177 caliber version can shoot up to 450 fps while the .22 caliber version has a claimed fps of up to 370. I look forward to testing and reviewing the Webley Nemesis .177 Caliber Pellet Pistol as soon as I can.
I also showcase the G&G GPM1911 GBB Airsoft Pistol which is a well priced basic A1 styled 1911 that is really well built and about one of the heaviest full metal 1911’s I have come across to date hitting the scale at nearly 2 pounds and 4 ounces. Another Replica Airgun I look forward to treating out!
This Review for the Umarex Legends Cowboy Shell Ejecting CO2 BB Rifle is a bit different than most I do since usually I perform a dedicated Table Top and Field Test Reviews for each gun I review here on the Replica Airguns Website. I feel that since the Umarex Legends Cowboy Shell Ejecting CO2 BB Rifle is such a “long gun” that showing it on the table would not work so well , plus it was a super nice day and I wanted to get outside and maybe even shoot a little bit.
I will be performing my usual Field Test Shooting video where I test the Feet Per Second and accuracy at 30 feet so stay posted for that. For now I will leave you with this outdoor “Show and Tell” review.
Specifications:
Type: CO2 BB Rifle. Manufacturer: Umarex Model: Umarex Legends Cowboy Materials: Mainly metal with plastic stock. Weight: 5.95 pounds (2699 grams). Length: 38 inches total length Barrel: 19.25 inch Metal non-rifled smooth bore. Propulsion: Dual 12 gram CO2. Action: Lever Action. Ammunition Type: 4.5mm Steel BB's. Ammunition Capacity: 10. FPS: 410 fps.
Trigger Pull: The trigger pull on the Umarex Legends Cowboy Shell Ejecting CO2 BB Rifle is pretty much a single action only trigger since you will need to work the lever action to not only elect and chamber a shell but to also pre cock the hammer. Once the hammer is cocked and ready the trigger pull is short, light and crips, perfect for accurate shooting.
Accuracy: I have only shot 16 rounds through the Umarex Legends Cowboy Shell Ejecting CO2 BB Rifle during the making of this review video and found the Umarex Legends Cowboy Shell Ejecting CO2 BB Rifle to shoot right on target at 30 feet out. I did notice it shot just slightly high at this range but not a lot and it was dead center windage wise. For longer ranges you can adjust the rear sight to raise the barrel even more. In terms of power it’s hard to say what I was getting, Umarex says it should hit around 410 fps, I felt like it was pretty close to this , maybe a tad bit faster but I will find out for sure when I perform my Field Test Shooting Video Review shortly.
Build Quality: The Umarex Legends Cowboy Shell Ejecting CO2 BB Rifle looks and feels great coming in at nearly 6 pounds and built out of mostly metal with a plastic stock. Don’t be too put out by the plastic stock, it does mimmic the part of wood very well. All the metal parts have a semi-gloss or I would even say matt back finish and so far the paint is wearing pretty good, no noticeable paint coming off that I can see. The action works great with no failure to chamber, eject or shoot rounds.
Realism: The Umarex Legends Cowboy Shell Ejecting CO2 BB Rifle is an awesome example of the classic lever action cowboy rifle. Having the ejecting shells makes it feel like you are shooting the real deal right from the time you start loading up the 10 shells into the pipe magazine, until you work that lever action and pull the trigger. Watching the ejected shells fly through the air is the icing on the cake :) There is not much more you can ask for from a BB firing replica Lever Action Cowboy Rifle!
Pros:
Super realistic replica lever action BB firing Cowboy Rifle.
Fully working lever action, chambers and ejects shells perfectly.
Good weight and feel to it with lots of metal throughout.
Everything works exactly like the real steel version.
Duel CO2 to help get not only more shots before reloading CO2 but also a more consistent FPS from all shots.
Adjustable rear sight for elevation.
Comes with 10 rounds and can also use your Umarex Colt Single Action Army BB shells in it.
Plastic imitation wood stock looks very much like real wood.
Cons:
Stock is not real wood, hopefully Umarex offers a wood upgrade for it at some time.
A bit low in FPS, why not take it right up to 499 fps since the US version has a 600 fps rating.
Took too long for us to get it here in Canada!.
Comments:
The Umarex Legends Cowboy Shell Ejecting CO2 BB Rifle is a perfect example of an Airgun company listening to their customers and bringing to market exactly what we are looking for, kind of like the Single Action Army Revolvers that came out a while back. These old cowboy guns are a blast to shoot from the time you pick up the rifle, insert 10 shells into the magazine, work the lever action, pull that trigger and then repeat 10 times. This is a must have for anyone looking for a super realistic BB rifle, even if you’re not an old west cowboy fan I think you will love shooting the Umarex Legends Cowboy Shell Ejecting CO2 BB Rifle!
My Table Top Video of the Umarex Legends Cowboy Shell Ejecting CO2 BB Rifle:
I have been looking forward to making this Filed Test Shooting Review for some time now. I have reviewed lots of other KWC CO2 BB 1911’s in the past but this is the first pellet shooting version and it even has a full size drop out metal magazine that holds the CO2 and duel 6 round rotary magazines. Sure there is no blowback operation and the trigger is double action only but it does have a rifled barrel and I was hoping it would get decent accuracy because of this. Let’s find out…
Starting with my Chronograph test to see if I could hit the 345 fps claimed velocity on the outside of the KWC M1911 Non-Blowback CO2 Pellet Pistol Box, as always I used a brand new CO2 cartridge for testing. I then loaded 6 RWS Super-H-Point 6.9 grain lead pellets into the 6 round rotary magazines and fired off 6 shots to get an average. Even using these lead non-hypervelocity pellets I was able to get an average of 341 fps with some of the faster shots hitting 350 fps so yes the KWC M1911 Non-Blowback CO2 Pellet Pistol does get the pellets up to 345 fps as claimed by KWC. The temperature was about average at right around 24 degrees Celsius or 75 degrees Fahrenheit.
Time for the accuracy potion of my Field Test Shooting Review for the KWC M1911 Non-Blowback CO2 Pellet Pistol. Since the KWC M1911 Non-Blowback CO2 Pellet Pistol has twin 6 round rotary magazines, I decided to shoot them all off and get a 12 round grouping on my paper target setup 30 feet down range shooting from a seated and rested position. My first 6 rounds all hit well within 1 inch or less of each other about 1.5 inches high from the bullseye and just a tad to the left. I then rotated the KWC M1911 Non-Blowback CO2 Pellet Pistol 6 shot rotary magazine to the remaining 6 rounds and again almost all of them shot right on top of the first 6 rounds, I did pull one shot a bit that hit low and then may have pulled another shot just a little bit high from the 1 inch group but 10 of the 12 rounds ended up making a nice 1 inch hole in the target.
Even though the KWC M1911 Non-Blowback CO2 Pellet Pistol has a double action only trigger, it is very usable in terms of placing accurate shots on target. The trigger is really not too heavy and does have a predictable break and release point to it. The gun holds just like any other 1911 I have shot but is slightly lighter and a little bit top heavy since it has a polymer frame to go along with the metal slide and magazines. If you’re looking for a realistic looking and feeling pellet firing 1911 with decent fps and excellent accuracy then look no further than the KWC M1911 Non-Blowback CO2 Pellet Pistol.
The question comes up often about which Airgun to buy. Customers are wondering when they are looking at a specific Airgun and they see several similar products but from different companies, are they the same gun and if so which one should they decide to buy?
One of the biggest Airgun suppliers out there is for sure KWC, their BB and Airsoft guns are redistributed through companies like Umarex, Crosman, Sig Sauer, ASG, Gletcher and more. Often times the companies that redistribute KWC Airguns hold licensing agreements with real gun manufacturers like Smith & Wesson, Glock, Colt, Beretta, Sig Sauer, Taurus to name a few… KWC makes the Airguns in their Taiwanese factory but they are not allowed to put a real gun manufacturer license on the Airguns they distribute directly so KWC distributed Airguns will generally be all black.
I have also seen companies like Umarex distribute a new KWC Airgun that I have not seen yet from KWC, I believe KWC works with these big name Airgun companies directly and will build a new gun or variation of an existing KWC Airgun for them and give that Company an exclusive for a period of time. KWC will eventually regain the rights to sell that Airgun model directly after 6 months to a year.
Now that you know a little bit more on how it all works let’s get back to whether you should buy a KWC branded Airgun or other Brands same Airgun. It really comes down to I would say three factors. Do you want a Licensed version of the Airgun you are buying? Is there a price difference? Which gun is available to buy when I am ready to buy?
When you buy the Licensed version of the KWC Airgun redistributed through a third part Airgun Company you will often get a lot more writing on the Airgun than just the Gun Manufacturers name. Warning information comes to mind and does not look all that attractive on the slide where it is usually found in bright white lettering. If you like a cleaner look and don’t mind the lack of licensing then the KWC distributed version will generally be all back, nice and clean looking.
You would think buying the KWC Version that is sold more directly to the end customer would be the less expensive of the options because less hands are involved in the selling process. This is not always true, it is more about supply and demand, if more people want the cleaner looking KWC version but it’s harder to get ahold of than the price of the KWC version may actually be higher than say the Umarex or Crosman version. So shop around if price is the deciding factor as the guns are going to be mechanically the same with just some slight cosmetic differences between them.
Lastly, availability maybe what eventually leads you to buy a KWC version over an Umarex, or Crosman or Sig version since if the gun is not in stock well you may have limited options and so the one in stock is going to be perhaps your only option! Don’t feel like you got short changed, again these guns are virtually all the same at the end of the day no matter if you buy it from KWC, Umarex, Crosman, Sig Sauer, ASG, Gletcher or whomever.
