My systems setup for a more powerful airgun as I was shooting .22 caliber lead pellets with about 11-12 foot pounds of energy. Direct hits passing through the 3/4 inch cut outs had no problem laying down the metal paddles and resetting the paddles was a lot easier than I though it would be even way back 50 feet.
I did not have my Sig Sauer Virtus PCP .22 Caliber Air Rifle perfectly sighted in so I did have to aim low and to the left which made it a bit harder dropping the plates but I did manage to get the job done at least for providing a decent test video fo the Rx Target Systems for the purposes of this video.
Make sure to not only watch my Field Test Shooting video included in this post but also checkout my Rx Target Systems Preview Video where I show it up and close and also go into more details on the Rx Target Systems and how modular and versatile it really is.
I want to thank David Bitkowski from Rx Target Systems for providing me with this sample unit to share with the Replica Airguns community. This video is only a Preview video as I wanted to get the RX Target System out there before I follow up with my actual Table Top and Shooting Videos for it.
For now here are some of the key points I want to get out to everyone:
Mission: Rx Target Systems are meant to bridge the gap between firearms and airguns. They allow high precision shooting on a reactive, three- dimensional, rugged target that can be carted around in a back pack. What makes Rx Target Systems unique is that it is a system. It is so modular and adaptable with interchangable faceplates and paddles. Rx Target Systems are not going to break or get dented or dissembled on the range as many of the lighter gauged steel targets on the market today vs today’s high powered airguns.
Modular
One base allows interchange of faceplates for different target configurations
One threaded axel allows interchange of paddle from 10 gauge to 3/8 inch-thick paddles
Portable
Mount it on a shelf indoors
Mount it on a sawhorse outdoors
Carry it in a backpack or duffle bag- its 10 pounds
Rugged
Solid steel design
Faceplates from 10 gauge to ¼ inch thick
3-Dimensional
Faceplate is offset from paddles
Clipping the aperture does not guarantee a score
Intentions of target configurations
Standard 1 inch bulls.- represents kill zone of many small game at 30 yards, great for sighting in prior to the hunt. Also is ¼ scale of bull used in rapid fire pistol when shot from 8.3 meters. (25 meters distance/100mm bull)
1.2 inch bulls- represents the 4-10 ring of the NRA 10 meter air rifle target. Gears the shooter to consistently hitting the “black” of that target on paper
AAFTA style- represents common kill zones found in American Airgun Field Target Assosciation using 1.5”, 1”, ¾", ½", and 3/8”.
WFTF style- represents common kill zones found in World Field Target Federation using 15mm, 25mm, and 38mm apertures
10-15- Inspired by customer request, uses 10mm and 15mm apertures. High-Precision shooting.
This isn’t a SHOT Show 2020 Interview but most certainly worth reporting on. While walking around SHOT Show I ventured into the Chiappa Booth as I own a .22 caliber 1911 styled pistol from them and they do have some interesting products to take a look at.
Then I saw a red tip on one of their Chiappa Rhino Revolvers which caught my eye since I was not aware that Chiappa was making an Airgun version of their Rhino. Well as it turns out they are hoping to be shipping both an Airsoft version and Steel BB version around spring time and from what I can tell there will be two finishes, a kind of Gold Satin finish and also a Back finish version. As is with a lot of revolvers these days they will be shell loading which will help them look the part of a real steel Chiappa Rhino Revolver.
Looking forward to getting my hands on one when they come out in Spring this year!
Here we go again, another round of SHOT Show videos brought to you direct from Replica Airguns!
As always I like to start off with a Teaser Video with a few quick clips of some of the new products I had the opportunity to take a look at at this years SHOT Show 2020 Las Vegas.
I will be rolling out Interview Videos as quickly as I can edit them and put them together for the following Airgun Related companies:
Sig Sauer
Umarex
Crosman - Velocity Outdoors
ASG
Air Venturi
Chiappa
So sit back and enjoy this years Replica Airguns SHOT Show 2020 Las Vegas Teaser Video!
Type: Paintball Gun. Manufacturer:Umarex - T4E. Model:T4E TR50 Materials: Metal & Polymer. Weight: 726 grams (1.6 pounds). Barrel: Smooth bore. Power Source: 1x12 gram CO2. Action: Revolver - Double action only trigger. Ammo Type: .50 Caliber Paintball or Rubber Ball. Ammo Capacity: 6 Rounds x 5 magazines. FPS: 360.
Trigger Pull: The trigger pull on Umarex T4E TR50 .50 Caliber Paintball Revolver is double action only but not very long with a very different feel than I am use to. The best way to describe it is kind of lumpy, it starts out a bit firm and then eases off a lot just before it releases. Like climbing a hill and then coasting down the otters side. I will have to see how it feels when it’s all loaded up with CO2 and Paintballs and actually shooting at a target.
Build Quality: The build quality of the Umarex T4E TR50 .50 Caliber Paintball Revolver is good overall. It is a mostly plastic build with some metal parts where they need to be internally. It is essentially two plastic halves held together by screws with the few actual mechanical working external parts. You have the trigger with it’s working trigger safety, the removable magazine and magazine release and of course the quick puncture CO2 screw knob. The hammer is internal. The Umarex T4E TR50 .50 Caliber Paintball Revolver is not very heavy but it does feel really solid in the hand.
Expected fairly high fps power of 360 with .50 caliber paintballs, a bit too high for your average paintball field but perhaps powerful enough to discourage an intruder?
Lots of mounting option for accessories like a tac light, laser or other sighting option with it’s upper and lower picatinny rail setup.
Quick CO2 pierce system so you can leave a CO2 in it ready to go any time with no worries about CO2 leaking out.
Working Trigger Safety.
Comes with 5 total magazines you can preload ready for use.
Super non-complicated design. Once loaded with CO2 and Paintballs all you need to do is hit the CO2 knob and then pull the trigger.
Build quality feels good, the gun is fairly beefy but not overly heavy or hard to hold.
Cons:
Mostly all plastic build.
Sights do not have white dots on them and are not adjustable.
Do not expect a lot of shots per CO2. Will find out when I do my Field Test Shooting Review.
Comments:
The Umarex T4E TR50 .50 Caliber Paintball Revolver is an interesting Paintball gun, overseas versions are marketed as the HDR50 which stands for “Home Defense Revolver”, while the North American version is marketed as the TR50 or “Training Revolver”. This is mainly because in the Europe most countries are not allowed to own real handguns but can own “Self Defense handguns”. In North America as most people are well aware, in the US real handguns are very easy to obtain and can be used for self defense. Just across the border here in Canada we can not really purposely have on hand anything that we plan to use as a weapon for self defense so the Umarex T4E TR50 .50 Caliber Paintball Revolver is marketed as a Training Revolver. What’s the difference? Not much, our North American 360 fps version is a lot like the 7.5 joule German version in terms of power but you can also get a more powerful 11 joule version in the UK. All that said, the Umarex T4E TR50 .50 Caliber Paintball Revolver at least here in Canada is made and marketed as a Paintball gun but on the field may be too powerful? What you decide to do with it is up to you!
I have not officially done a Field Test Shooting Video for the Umarex Legends CO2 BB Lever Action Cowboy Rifle other than my quick outside shooting test where I simply shot a bunch of rounds at some pop cans just to see how the Umarex Legends CO2 BB Lever Action Cowboy Rifle would work for me and it did perform well during that test.
Jumping ahead to a little while later when I went to make my Official Field Test Shooting Video for the Umarex Legends CO2 BB Lever Action Cowboy Rifle. I found it was not performing well at all, shooting well under the 410 claimed fps closer to 200 fps which was a surprise since it seemed to do a lot better for me on my previous test. I even changed out the CO2 but still did not get any better results. I racked this up to maybe being a defective gun and so I went about getting my hands on another Umarex Legends CO2 BB Lever Action Cowboy Rifle.
Guess what? Same thing with rifle number two. Very poor fps, again almost half of the claimed rated velocity. So at this point I decided I was goring to make the Field Test Shooting Video for the Umarex Legends CO2 BB Lever Action Cowboy Rifle and let the results speak for themselves… I also thought it would be fun to compare it to the Classic 1938 Daisy Red Ryder BB Gun since I figured they would both get similar fps and accuracy and be rather comparable at the end of the day.
I do have to say that the Umarex Legends CO2 BB Lever Action Cowboy Rifle did make me eat my words and I am happy it did since I really like the Umarex Legends CO2 BB Lever Action Cowboy Rifle and wanted it to do well!
Usually I state all there results for My Field Test Shooting Videos here in the written article but I kind of feel it is best if you just watch this one from start to finishes since the video result s did turn out to really surprise me in the end.
Make sure to watch my Table Top Review Video if you want more info on the details and specifications for the Daisy Powerline 5170 CO2 BB Pistol! in this Field Test Shooting video I test out the Daisy Powerline 5170 CO2 BB Pistol inside the Replica Airguns indoor Sea Can Airgun Range to see how well it performs in terms of Velocity and Accuracy. The temperature was 20 degrees Celsius (68 degrees Fahrenheit) so not too hot or too cold on this test day. I was also using a brand new CO2 along with 5.1 grain RWS zinc coated steel BB’s.
For the first test to find out what the actual velocity is for the Daisy Powerline 5170 CO2 BB Pistol, I placed 5 rounds through my Chronograph back to back and I was able to get an average of 456 fps with the fastest shoot hitting 460 fps and the slowest shot in the string hitting 451 fps. All within 9 fps of each other so very consistent.
Next I setup a fresh paper target 30 feet down range and proceeded to do my best to obtain a 10 shot grouping using a seated and rested shooting position. Most of the shots form the Daisy Powerline 5170 CO2 BB Pistol where all under 1.5 inches apart, just a little bit high and slightly to the left. I did get a flyer that went a little bit lower than the rest lengthening out the 10 shot grouping to about 2 inches in diameter. I am pretty sure I would be able to get a 1 inch grouping with the Daisy Powerline 5170 CO2 BB Pistol after some practice.
Overall the Daisy Powerline 5170 CO2 BB Pistol performed well for me shooting consistently without any issues. The Daisy Powerline 5170 CO2 BB Pistol is fairly basic in design but does have the added much suppressor that allows for a longer inner barrel giving it a little more fps. You also have the removable sight rail fi you want to add some optical sights or perhaps a laser or tactical light or maybe all of them? Pickup the Daisy Powerline 5170 CO2 BB Pistol in a variety of colors over at the Replica Airguns Online Canada and US Stores!
Make sure to watch my Table Top Review Video if you want more info on the details and specifications for the Crosman P10 Wildcat CO2 BB Pistol Airgun Kit! in this Field Test Shooting video I test out the Crosman P10 Wildcat CO2 BB Pistol Airgun Kit inside the Replica Airguns indoor Sea Can Airgun Range to see how well it performs in terms of Velocity and accuracy. The temperature was 20 degrees Celsius (68 degrees Fahrenheit) so not too hot or too cold on this test day. I was also using a brand new CO2 along with 5.1 grain RWS zinc coated steel BB’s.
For the first test to find out what the actual velocity is for the Crosman P10 Wildcat CO2 BB Pistol Airgun Kit I placed 5 rounds through my Chronograph back to back and I was able to get an average of 396 fps with the fastest shoot hitting 404 fps and the slowest shot in the string hitting 389 fps. Interestingly enough the fastest shot was the last shot in my 5 shot string so CO2 cooling did not effect the Crosman P10 Wildcat CO2 BB Pistol Airgun Kit too much.
Next I setup a fresh paper target 30 feet down range and proceeded to do my best to obtain a 10 shot grouping using a seated and rested shooting position. I may have only loaded 9 rounds this time but I was still able to get a good idea on how well the Crosman P10 Wildcat CO2 BB Pistol Airgun Kit performs in the accuracy department. Most of the shots where all under 2 inches and well center on the target with at least 3 or 4 rounds in the bullseye. I did get a flyer that went rather high but we will assume there may have been a bad BB in the bunch shine I did not feel I pulled that shot at all and since the other rods all placed well together well will go with the smaller grouping of under 2 inches.
Overall the Crosman P10 Wildcat CO2 BB Pistol Airgun Kit performed well for me shooting consistently without any issues. The Crosman P10 Wildcat CO2 BB Pistol Airgun Kit is a very basic airgun with your standard double action trigger that will be on the longer side, that said it felt pretty good and was not overly heavy with a fairly predictable pull and release making it easy enough to find your target. Action shooting will be OK too since the trigger is not super heavy for a double action only trigger. Pickup the Crosman P10 Wildcat CO2 BB Pistol in a variety of colors over at the Replica Airguns Online Canada and US Stores!
In a way I have already Field Tested the Air Venturi TR5 .177 Caliber Pellet Rifle, well at least in the Baikal version. The Air Venturi version is pretty much a knock of of the Baikal IZH MP-61 which not only look a lot alike but also performed very similarly for me, checkout my Baikal YouTube Video Review for comparison. All that said we can not get Baikal products here in North America anymore so it’s great that Air Venturi has recreated a very similar product for us to have in Canada and the US.
Moving on to the Field Test Review for the Air Venturi TR5 .177 Caliber Pellet Rifle, I first placed 5 shots through my Chronograph to see if the Air Venturi TR5 .177 Caliber Pellet Rifle did in fact shoot around 500 fps and in fact I was able to get all 5 shots up and over 500 fps averaging around 513 fps. Still within our Non-regulated firearm laws here in Canada since we where still under the 4.2 foot pound energy limit using 6.9 grain pellets.
As mentioned before when I shot the Baikal IZH MP-61 I was able to get very similar results but I did have an optical scope on the Baikal IZH MP-61 as compared to the Air Venturi TR5 .177 Caliber Pellet Rifle where I just used the open sights. In my opinion the Air Venturi TR5 .177 Caliber Pellet Rifle is good value for your money offering a unique design with excellent performance and getting as much power out of a pellet rifle as you can get here in Canada without requiring a firearms license.
Pick one up in our Canada or US Online Replica Airguns stores!
It’s always fun shooting a Paintball Gun like the Umarex T4E S&W M&P9 M2.0 .43 Cal. Paintball Pistol for a change but in this case it’s not all that different then shooting one of my BB or Airsoft pistols, with the acceptation of the .43 caliber rubber balls. I went with rubber balls rather than Paintballs inside my Sea Can Indoor Airguns Shooting Range to keep things clean. Actual Paintballs may have performed a little different than the rubber balls but this gives us a good idea on what the Umarex T4E S&W M&P9 M2.0 .43 Cal. Paintball Pistol is capable of
First, I put five rounds through my Chrony Chronograph to see what the real world FPS would be, keep in mind I was using rubber balls rather than paintballs and the rubber balls are a little bit heavier than paintballs so this could bring the FPS down a bit compared to the slightly lighter paintballs. Using a brand new CO2, the Umarex T4E S&W M&P9 M2.0 .43 Cal. Paintball Pistol average 315 FPS which was higher than the claimed 290 FPS! Temperature inside my Sea Can Airgun Shooting Range was around 24 degrees Celsius or 75 degrees Fahrenheit.
Moving on to my accuracy testing, as per usual I positioned myself 30 feet back from my fresh paper target and using a seated and rested shooting position I shot a full magazine (8 rounds) of rubber balls on target with the Umarex T4E S&W M&P9 M2.0 .43 Cal. Paintball Pistol. I was not expecting as tight groups as I would get using a BB or Airsoft pistol since Paintball guns are not known for super tight groups. I did manage to shoot around a 6 inch group with most of the shots staying within around 3 inches all pretty well centered. This is about what I was expecting as paintball guns are not meant for "target practicing", generally you are going to be shooting human sized objects and hoping to get some well placed center mass shots. 3-6 inch accuracy at 30 feet will get the job done for sure. I did find the trigger using rubber balls did have a bit more friction while the inner barrel seated itself into the magazine. When shooting quickly with the Umarex T4E S&W M&P9 M2.0 .43 Cal. Paintball Pistol it is much less noticeable and overal the trigger is not bad.
I know some of you are going to ask about using the Umarex T4E S&W M&P9 M2.0 .43 Cal. Paintball Pistol with rubber balls for non-lethal self defense and the reality is it will not stop a person who is determined on hurting you. There is simply not enough stoping power here. Will it a lot if you get shot up close with one of these Umarex T4E S&W M&P9 M2.0 .43 Cal. Paintball Pistols especially directly on the skin ? For sure but a well timed punch has more chance of dropping someone than a .43 caliber rubber ball moving at around 300 FPS. You may scare someone off simply by brandishing it but you take the chance of the person calling your bluff. Perhaps 8 rubber balls to the face will change their mind but that's a chance you have to figure out if you want to take or not.
Another Field Test Shooting Video Review coming for the Replica Airguns Sea Can Indoor Airgun Shooting Range! In todays Shooting Review I test out the Schofield No. 3 CO2 BB-Pellet Revolver using both 4.5mm 5/1 grain Steel BB’s and .177 Caliber 6.9 grain Lead Pellets to see how well they perform in velocity and accuracy. As always I use a brand new CO2 for my velocity testing and for reference the temperature during my testing in the Sea Can was 23 degrees Celsius or 73 degrees Fahrenheit. For my accuracy portion of the shooting test I use a rested and seated shooting position shot 30 feet away from my fresh paper targets.
Starting off with the velocity or power potion of my Field Test Shooting Video for the Schofield No. 3 CO2 BB-Pellet Revolver. I first used the 4.5mm Steel BB shells and shot 3 rounds through my Chronograph averaging 369 fps. I then loaded up the Schofield No. 3 CO2 BB-Pellet Revolver with pellet shells and again placed three .177 caliber lead pellets through my Chrony and got a very similar result with an average of 361 fps. Keep in mind the lead pellets where 6.9 grain versus the steel BB’s at only 5.1 grain, so the lead pellets will be carrying more raw energy at the point of impact even though they where going just a tad bit slower than the steel BB’s.
In terms of accuracy both rounds performed about the same shooting at my paper target 30 feet away. Since the Schofield No. 3 CO2 BB-Pellet Revolver has a 6 round cylinder I shot 6 sounds for each test, 6 steel BB’s and then 6 lead pellets. I also changed the targets for each type of ammo between reloading. I found the Schofield No. 3 CO2 BB-Pellet Revolver shot fairly close to the bullseye, l but with both the Steel BB’s and lead pellets I got one outlier that spread out my groupings significantly, the other 5 rounds where all close being about 2 inches apart? Perhaps it was a bad or misshaped round, or maybe even me ;) I did notice the lead pellets seemed to have a really nice 4 round group out of the 6 that all fell within the bullseye. Hard to really say if BB’s or pellets performed better than the other one at least in my testing.
Overall the Schofield No. 3 CO2 BB-Pellet Revolver shot well for me, the trigger is nice and short and light making placing your shots easy, of course since it is a single action only trigger you kind of need to reset yourself between every shot which can effect groupings just a bit. Since the barrel is not rifled with no danger of damaging the rifling, you can really shoot what ever ammo type you feel like shooting or have on hand and since Schofield No. 3 CO2 BB-Pellet Revolvers get about the same speed and accuracy then it really doesn’t matter that much at the end of the day!
Type: BB/Pellet air revolver. Manufacturer/Distributor: Bear River. Model: Schofield No. 3 Materials: Mostly metal with plastic grips. Weight: 2.4 pounds. (1089 grams) Barrel: 7 inch (178mm) smooth bore barrel. Propulsion: 12 gram CO2. Action: Revolver, single action only. Ammunition Type: 4.5mm steel BB's and .177 Cal. Pellets. Ammunition Capacity: 6 rounds. FPS: 445fps.
Trigger Pull: The trigger pull on the single action only Schofield No. 3 CO2 BB-Pellet Revolver is what you would expect from a pistol of this design. Like the Colt Single Action Army the trigger pull is very short, light and crips, perfect for taking your time and getting a precise shot on target. You will of course have to cock the hammer manually before each shot ao no real action shooting.
Accuracy: I have not tested the Schofield No. 3 CO2 BB-Pellet Revolver in the Replica Airguns Sea Can Indoor Airgun Range but plan to get to it shortly. I will test out both 4.5mm Steel BB’s and some .177 caliber lead Pellets and see how the different ammo types effect both power and accuracy. Keep in mind the Schofield No. 3 CO2 BB-Pellet Revolver has a smooth bore barrel but I am pretty sure pellets will still perform well at 30 feet away.
Build Quality: The Schofield No. 3 CO2 BB-Pellet Revolver is built a lot like the Webley MK VI .455 CO2 Shell Loading Revolver line, perhaps even made in the same factory in Taiwan? The Schofield No. 3 CO2 BB-Pellet Revolver is pretty much an all metal construction other than the plastic grips and any internal seals. The fit and finish is excellent with a great overall weight in the hand. The pistol grips is a lot like what you have with the Colt Single Action Army pistol but the Schofield No. 3 CO2 BB-Pellet Revolver is a lot more front end heavy because of its beefy barrel.
Realism: In terms of replicating a real steel Schofield No. 3 CO2 BB-Pellet Revolver for sure looks and feels that part. The reassessed barrel and well hidden CO2 screw don’t give anything away that the Airgun version is not the real deal. But as with all of these shell loading Airgun Revolvers, the shells are actually closer to a .380 Caliber in diameter rather than a 45 which is what the real steel Schofield No. 3 CO2 BB-Pellet Revolver would be designed for.
If you are like a bulky revolver with good weight to it then the Bear River Schofield No. 3 is it.
Can shoot Steel BB’s or Pellets since it comers with both shell types.
Recessed barrel.
Well concealed CO2.
Shell loading design that loads from the back so no need to remove shells if you wish not to.
Single Action Only hammer and trigger action feel good, nice and light with short take-up and release.
Fairly discreet safety location right behind the hammer so easy to get at.
Super easy to load, pellet shells can even be reloaded with shells in the gun if you are using the pellet shells.
Really like the Nickel Finish on this gun.
Can get simulated Ivory grips for it if you prefer that look.
Cons:
Sights are not adjustable.
Warning instructions on side of the frame.
Barrel is not rifled for pellet use?
Only a Single Action Only Hammer and Trigger but true to the style of the gun.
Comments:
Yet another classic shell loading CO2 BB Revolver, and again the more the merrier in my option! I like that you get 12 shells with our kit version, 6 removable shells for 4.5mm Steel BB’s and 6 removable shells for .177 caliber Pellets. The Schofield No. 3 CO2 BB-Pellet Revolver is for sure a hefty revolver but the pistol grip is not super large so even people with smaller hands should not have a problem shooting the Schofield No. 3 CO2 BB-Pellet Revolver. The real problem is deciding which Shell Loading Airgun Revolver to buy now since we have so many to choose from… Classic or modern, nickel or black, or perhaps weathered?
My Table Top Review for the Schofield No. 3 CO2 BB/Pellet Revolver:
Here we have three very different products I Unbox and Preview for everyone. A Spring Piston multi-shot .177 Caliber Pellet Rifle, a single action BB/Pellet revolver that’s not a Colt! And a really nice looking Semi Auto Blank Pistol in a Chrome finish.
Let’s start with the Air Venturi TR5 Spring Piston 5-shot .177 Caliber Pellet Rifle. I think this is a really well thought out Air Rifle. It’s “almost a Bullpup” in design but it does actually load in front of the trigger just a bit, that said most of the spring piston is behind the trigger setup making it really compact yet with a longer than normal barrel compared to regular Break Barrel Spring Piston Air Rifles. The Air Venturi TR5 Spring Piston 5-shot .177 Caliber Pellet Rifle also has a side lever cocking mechanism along with a 5 round auto indexing magazine which makes it much quicker to cock and reload for fast follow-up shots, again compared to a standard Break Barrel Air Rifle, not to mention no barrel droop! The Air Venturi TR5 Spring Piston 5-shot .177 Caliber Pellet Rifle has a claimed fps of up to 500 so we are getting the max amount of velocity possible for our Canadian laws without making it a regulated firearm and requiring a PAL license. And by the way the Air Venturi TR5 Spring Piston 5-shot .177 Caliber Pellet Rifle does come in both a Lime Green and all Black version just in case you are not a fan of the Lime Green finish I show in this video.
Moving onto the Schofield No. 3 BB/Pellet 6 Shot Revolver Replica, if you like single action revolvers then take a look at the Schofield No. 3 BB/Pellet 6 Shot Revolver Replica. It’s a lot more bulky than a Colt Single Action Revolver and also has that top Break design that makes reloading quick and easy. The version we are selling inner Replica Airgun Online Store is the kit version that comes with 6 BB shells and 6 pellet shells so you can take your pick on ammo types. The barrel is not rifled so Steel BB’s will not hurt the Airgun and since pellets are skirted they do not need a rifled barrel to fly straight and true. You can expect around 445 fps for the Schofield No. 3 BB/Pellet 6 Shot Revolver Replica.
I don’t do a lot of paintball gun reviews, they just don’t come across my table all that often so it’s a lot fo fun when I do get the chance to shoot some beefier caliber ammunition in the Replica Airguns Sea Can Indoor Airgun Shooting Range. Of course I use rubber ball ammo rather than standard paintball rounds in order to keep the mess to a minimum.
I have not done my Table Top YouTube Video Review yet for the Umarex T4E HDS Double Barrel CO2 Paintball Shotgun but you can checkout a Preview Video for now. In Summary the Umarex T4E HDS Double Barrel CO2 Paintball Shotgun is a pretty much exactly what the name says. It’s basically a sawn off pistol grip styled double barrel shotgun that uses CO2 and shoots .68 caliber paintballs. You have a selector for shooting either out of the left or right barrel or if you want to can even both at the same time but this really slows down the fps so I would not advise it with the 200 fps version that I was testing with.
Now on to the actual testing of the Umarex T4E HDS Double Barrel CO2 Paintball Shotgun! As alway I like to find out how close to the factory claimed fps I will get. Umarex claims around 200 fps for this version which is around 7.5 Joules of energy, apparently there is a 16 Joules version that shoots closer to 300 fps but we do not carry it at least right now. I put a couple fo rounds through my Umarex T4E HDS Double Barrel CO2 Paintball Shotgun using rubber ball paintballs which will be a little bit heavier than a standard paintballs and my first shot yielded 180 fps, my second shot was slightly higher at 184 fps so pretty close to the claimed 200 fps and that was in not the warmest of environments since the temperature in the Replica Airguns Sea Can Indoor Airgun Shooting Range was only 16 Degrees Celsius (60 Degrees Fahrenheit).
Next up it was time to see how the Umarex T4E HDS Double Barrel CO2 Paintball Shotgun performed shooting at a target setup 30 feet away. Since there are no actual sights on the Umarex T4E HDS Double Barrel CO2 Paintball Shotgun I had to kind eyeball it and as I shot it more and more I was able to get my shots closer to the center of the target. The Umarex T4E HDS Double Barrel CO2 Paintball Shotgun is not a tac driver but at 30 feet out you should be able to hit an 8-10 inch target pretty consistently. I don’t recommend using the double shot option since the same amount of CO2 is applied to both rounds that would normally be applied to one round decreasing the fps by about half making the paintball rounds shoot a lot slower and not really being that effective. This may be an option with the higher 300 fps version of the Umarex T4E HDS Double Barrel CO2 Paintball Shotgun.
So all in all I had a lot of fun shooting the Umarex T4E HDS Double Barrel CO2 Paintball Shotgun, it’s kind of like a big boy Nerf Gun that you can take onto the paintball field if you wanted to. For home defense I think it is a bit underpowered but there may be a little bit of shock factor that could slow someone down or deter them enough to either give you time get away or take shelter somewhere safe. Maybe using the pepper rounds would work OK in this situation? Either way the Umarex T4E HDS Double Barrel CO2 Paintball Shotgun is a really cool and unique CO2 Airgun that is not overly expensive and a welcome addition to any Airgun enthusiasts collection.
Starting off with my velocity power test using my Caldwell Ballistic Precision Chronograph, I was able to get really close to the factory claimed fps of 360 with an average of 347 fps. Shooting conditions where decent in the See Can compared to outside temperatures in late October but still not that warm at only 16 Degrees Celsius (60 Degrees Fahrenheit), a lot warmer than outside but still not as warm as your typical summer day. In warmer conditions I am sure I would have hit the claimed 360 or even high fps with the Umarex Glock 19X CO2 Blowback BB Pistol.
Next for my Field Testing , I placed 10 shots into a paper target with my Umarex Glock 19X CO2 Blowback BB Pistol from 30 feet down range using my standard seated and rested shooting position (Seated in the back and rested on a sand bag up front). I was able to get right around a 2 inch 10 shot group, not bad at all! The Umarex Glock 19X CO2 Blowback BB Pistol did shoot a little bit high and to the left which for some reason is common with most CO2 action airguns and I know it’s not entirely me since others have commented the their airguns shoot a bit to the left in most cases. Elevation was pretty close at 30 feet but just a tad high.
The Umarex Glock 19X CO2 Blowback BB Pistol is very similar to their Umarex Glock 17 3rd Gen in terms of their mechanical build and function since both use the same magazines and have that semi blowback action but I can say the Umarex Glock 19X CO2 Blowback BB Pistol not only looks better in my opinion but the slide is improved as it seems to have a less metallic sound and the slide wiggle is very minimal. The Umarex Glock 19X CO2 Blowback BB Pistol also did not lack in the performance department getting really close to the the claimed 360 FPS while shooting about the same 10 round grouping of 2 inches which is about what I expect for an action BB shooter. Now we have a bunch of Umarex Glocks to chooses from, checkout our Replica Airguns Canada and US Online Stores for Glock airguns and find one that’s right for you!
I don’t often make many Paintball Review Gun Videos let alone Shooting Videos so this one is a bit different than the norm. Lucky for me I have some .43 caliber Rubber Paintballs that I can use in my Indoor Sea Can Shooting Range so as not to make a mess of things. As per usual I like to use a brand new 12 Gram CO2 Cartridge for my testing and for your reference the temperature was right around room temperature or 21 degree Celsius, 69 degrees Fahrenheit.
First up I generally perform my Chronograph test to see what the real world velocity or fps is for the Umarex T4E HK 416 Training Marker CO2 Paintball Rifle. I shot a short string of rubber rounds through my Chronograph and was able to get a 280 fps average with the Umarex T4E HK 416 Training Marker CO2 Paintball Rifle. This is plenty enough power for the intended target down range to feel the paintball effect without causing too much trauma.
With the remaining 10 rounds in my Umarex T4E HK 416 Training Marker CO2 Paintball Rifle magazine, I then setup a brand new paper target 30 feet down range and using a rested and seated shooting position and carefully unloaded the Umarex T4E HK 416 Training Marker CO2 Paintball Rifle into the target. I was a bit surprised to see the rounds spread out a fair amount perhaps as much as 10-12 inches but at least half where in the target rings.
I would not recommend the Umarex T4E HK 416 Training Marker CO2 Paintball Rifle as a long range paintball marker but it would be perfect for close quarters ultra realistic simulations. I would like to give actual .43 caliber paintballs a try outside to see if accuracy would be better, maybe the rubber balls grip the barrel a bit too much causing some random and unexpected spinning to occur? Either way the Umarex T4E HK 416 Training Marker CO2 Paintball Rifle is a really unique and fun Paintball Gun to shoot, maybe not for everyone but if you want the most realistic Paintball Marker then it would be a great option.
In this Field Test Shooting Video I focus on Umarex’s latest CO2 Blowback BB Airgun, the Umarex Glock 17 4th Gen CO2 Blowback BB Pistol. We have been waiting a while for this one to ship and now that it’s here I really want to get to shooting it and finding out if it performed as good as it looked and felt.
I loaded up my Umarex Glock 17 4th Gen CO2 Blowback BB Pistol with a brand new 12 gram Sig Sauer CO2 cartridges along with some 4.5mm RWS 5.1 grain Zinc coated BB’s and began the Chronograph portion of my Indoor Field Test Shooting Video. The temperature was not overly warm sitting right around 19 degrees Celsius or 66 degrees Fahrenheit. Umarex claims roughly around 300 fps from the Umarex Glock 17 4th Gen CO2 Blowback BB Pistol but I was able to get just a bit high with my 5 shots through the Chronograph averaging 310 fps.
I then put up a paper target 30 feet down range, reloaded my full size drop out metal magazine with 10 more steel BB’s and proceeded to carefully place the 10 shots into the target using a rested and seated shooting position. I was able to get around a 3.5 inch grouping but I feel I could have done better since several rounds actually shot one on top of the other. The Umarex Glock 17 4th Gen CO2 Blowback BB Pistol did shot just a little bit low and to the left but not a lot.
The Webley Nemesis is a really interesting CO2 Pellet Pistol, so far I have not reviewed an Airgun like it. Yes I have reviewed bolt action CO2 Pellet Pistols in the past but not one with a rotary magazine for much quicker followup shots. This is by no means as quick as a semi auto shooter but being able to quickly work the bolt action without having to manually place a pellet in the breach area sure does speed things up.
On the box Webley claims up to 420 fps with the ,177 caliber version the Webley Nemesis is a really interesting CO2 Pellet Pistol I was testing and I was able to get an average of 430 fps using a brand new CO2 along with RWS 6.9 grain lead pellets. I did find the RWS pellets I was using did not feed all that well perhaps because they had a fairly narrow waist on them which does effect the way pellets are held in the rotary magazine. The temperature was fairly normal at right around room temperature.
For my accuracy portion of the Field Test Shooting Video for the Webley Nemesis is a really interesting CO2 Pellet Pistol, I switched to Sig Sauer .177 caliber lead pellets and they worked much better in terms of chambering cleanly for me. I found the Webley Nemesis is a really interesting CO2 Pellet Pistol shot a bit high on my paper target placed 30 feet away, so I set my sights on the bottom ring which placed almost all my 14 shots right in the bullseye. My 14 shot string was grouping around 1.5 inches but I am sure the Webley Nemesis is a really interesting CO2 Pellet Pistol could shoot quarter sized objects at 30 feet downrange all day long once you get use to it.
The trigger on the Webley Nemesis Bolt Action CO2 Pellet Pistol is one of the highlights of this air pistol, it really feels great. Combine this with nice high consistent fps and excellent accuracy and the Webley Nemesis is a really interesting CO2 Pellet Pistol is a great target shooter with potential for up close small pest control.
I’m going to start off by saying this Field Test Shooting Review for the G&G GPM1911 GBB Airsoft Pistol did not go all that well as I had some complications with this Airgun when chambering rounds. I am pretty sure it is magazine related and hope to try a different magazine with it soon. I say this because I am following through with my review regardless of my initial results to demonstrate that not all Airguns perform as expected during my reviews and sometimes you get a lemon even with a good quality brand like G&G.
I am fairly certain the defect in this case for the G&G GPM1911 GBB Airsoft Pistol was the magazine tip being too tight and not allowing an Airsoft BB to position all the way to the top of the magazine which means when the slide cycled and the nozzle was in position to push an Airsoft BB into the breach, it simple was hitting the top of the BB and pushing it even further into the magazine. All said and done I was able to test the fps and accuracy on target so let’s get on with my review.
Using .20 gram Airsoft BB’s with a fully filled propane gas magazine in my G&G GPM1911 GBB Airsoft Pistol, I was able to get 6 recoreded shots through my Chronograph averaging 319 fps. The slowest shot being 313 fps and the fastest shot hitting 330 fps. The temperature was right around room temperature so around 22 degrees Celsius or 72 degrees Fahrenheit.
As I was having issues with with the G&G GPM1911 GBB Airsoft Pistol chambering rounds with the .20 gram Airsoft BB’s. I was hoping that when I switched to a different .32 gram Airsoft BB for my target portion of this review that perhaps the different Airsoft BB’s would chamber better but they did not. To get through the target portion of my test, with each shot I had to drop the magazine, make sure the Airsoft BB’s was at the top of the magazine, rack the slide, insert the magazine and then release the slide. So as you can see I was resetting completely for each shot which does not always make for the tightest groupings. Surprisingly I was still able to get about a 1.5 inch grouping on my paper target setup 30 feet downrange using a rested and seated shooting position.
Not all reviews go as planned but you still have to make the best of it. I really feel the G&G GPM1911 GBB Airsoft Pistol is a good gun overall even though mine did not perform that well for me. When I was able to chamber a round it shot a consistent fps and placed Airsoft BB’s downrange accurately and very close to the bullseye. Perhaps simply by swapping out the magazine I will have a much more reliable Airsoft gun? I will have to get back to you on that one.
Lots of CO2 BB Rifles getting reviewed these days and that’s kind of awesome, I remember a few years back and we barely had any realistic Replica BB rifles available to us. Now we have an ever increasing list of choices from Historical to Modern.
Todays Field Test Shooting Video focusses on the Air Venturi Springfield Armory M1 Carbine CO2 BB Rifle, I have not done my Table Top Video yet for it but I did make a preview video where I show it around a bit and talk about some basic specs. In short the Air Venturi Springfield Armory M1 Carbine CO2 BB Rifle is a CO2 powered semi auto 4.5mm Steel BB firing replica of the Springfield Armory M1 Carbine. It holds the CO2 and 15 rounds of Steel BB’s in its full size drop out metal magazine. Available with a plastic or upgraded wood stock.
For the Field Test Shooting part of this review I tested out the power and accuracy of the Air Venturi Springfield Armory M1 Carbine CO2 BB Rifle by first shooting 5 rounds through my Chronograph to establish the Feet Per Second velocity. I then placed a fresh paper target 30 feet downrange, while using a rested and seated shooting position I fired off 10 rounds into the target to see how tight of a group I can get with the Air Venturi Springfield Armory M1 Carbine CO2 BB Rifle. I used a brand new CO2 along with 5.1 grain 4.5mm Zinc coated Steel BB’s. The temperature was a conservative 22 degrees Celsius or 71 degrees Fahrenheit.
During my Chronograph velocity test I was a bit surprised to only obtain an average of 335 fps from the Air Venturi Springfield Armory M1 Carbine CO2 BB Rifle. Air Venturi claims closer to 425 so I am not sure why it was nearly 100 fps lower than claimed but perhaps the CO2 did not pierce as well as it could have, that said 335 fps does get the job done when shooting targets 20-30 feet away.
In terms of accuracy I was very pleased with the Air Venturi Springfield Armory M1 Carbine CO2 BB Rifle, it kind of made up for the slower than expected feet per second by getting a sub 1 inch 10 round group and I am not a big fan of peep sights so I was really not expecting these results. Right out of the box the Air Venturi Springfield Armory M1 Carbine CO2 BB Rifle shot pretty close to the bullseye, just s slight bit to the left and about 1-2 inches high. The rear sight is adjustable for elevation so that can be taken care of pretty easy.
