View fullsize

Another Field Test Shooting Video Review coming for the Replica Airguns Sea Can Indoor Airgun Shooting Range! In todays Shooting Review I test out the Schofield No. 3 CO2 BB-Pellet Revolver using both 4.5mm 5/1 grain Steel BB’s and .177 Caliber 6.9 grain Lead Pellets to see how well they perform in velocity and accuracy. As always I use a brand new CO2 for my velocity testing and for reference the temperature during my testing in the Sea Can was 23 degrees Celsius or 73 degrees Fahrenheit. For my accuracy portion of the shooting test I use a rested and seated shooting position shot 30 feet away from my fresh paper targets.

View fullsize

Starting off with the velocity or power potion of my Field Test Shooting Video for the Schofield No. 3 CO2 BB-Pellet Revolver. I first used the 4.5mm Steel BB shells and shot 3 rounds through my Chronograph averaging 369 fps. I then loaded up the Schofield No. 3 CO2 BB-Pellet Revolver with pellet shells and again placed three .177 caliber lead pellets through my Chrony and got a very similar result with an average of 361 fps. Keep in mind the lead pellets where 6.9 grain versus the steel BB’s at only 5.1 grain, so the lead pellets will be carrying more raw energy at the point of impact even though they where going just a tad bit slower than the steel BB’s.

View fullsize

In terms of accuracy both rounds performed about the same shooting at my paper target 30 feet away. Since the Schofield No. 3 CO2 BB-Pellet Revolver has a 6 round cylinder I shot 6 sounds for each test, 6 steel BB’s and then 6 lead pellets. I also changed the targets for each type of ammo between reloading. I found the Schofield No. 3 CO2 BB-Pellet Revolver shot fairly close to the bullseye, l but with both the Steel BB’s and lead pellets I got one outlier that spread out my groupings significantly, the other 5 rounds where all close being about 2 inches apart? Perhaps it was a bad or misshaped round, or maybe even me ;) I did notice the lead pellets seemed to have a really nice 4 round group out of the 6 that all fell within the bullseye. Hard to really say if BB’s or pellets performed better than the other one at least in my testing.

View fullsize

Overall the Schofield No. 3 CO2 BB-Pellet Revolver shot well for me, the trigger is nice and short and light making placing your shots easy, of course since it is a single action only trigger you kind of need to reset yourself between every shot which can effect groupings just a bit. Since the barrel is not rifled with no danger of damaging the rifling, you can really shoot what ever ammo type you feel like shooting or have on hand and since Schofield No. 3 CO2 BB-Pellet Revolvers get about the same speed and accuracy then it really doesn’t matter that much at the end of the day!

• Buy the Schofield No. 3 CO2 BB-Pellet Revolver in Canada:

• Buy the Schofield No. 3 CO2 BB-Pellet Revolver in the US:

View fullsize

Type: BB/Pellet air revolver.
Manufacturer/Distributor: Bear River.
Model: Schofield No. 3
Materials: Mostly metal with plastic grips.
Weight: 2.4 pounds. (1089 grams)
Barrel: 7 inch (178mm) smooth bore barrel.
Propulsion: 12 gram CO2.
Action: Revolver, single action only.
Ammunition Type: 4.5mm steel BB's and .177 Cal. Pellets.
Ammunition Capacity: 6 rounds.
FPS: 445fps.

View fullsize

Trigger Pull: The trigger pull on the single action only Schofield No. 3 CO2 BB-Pellet Revolver is what you would expect from a pistol of this design. Like the Colt Single Action Army the trigger pull is very short, light and crips, perfect for taking your time and getting a precise shot on target. You will of course have to cock the hammer manually before each shot ao no real action shooting.

View fullsize

Accuracy: I have not tested the Schofield No. 3 CO2 BB-Pellet Revolver in the Replica Airguns Sea Can Indoor Airgun Range but plan to get to it shortly. I will test out both 4.5mm Steel BB’s and some .177 caliber lead Pellets and see how the different ammo types effect both power and accuracy. Keep in mind the Schofield No. 3 CO2 BB-Pellet Revolver has a smooth bore barrel but I am pretty sure pellets will still perform well at 30 feet away.

View fullsize

Build Quality: The Schofield No. 3 CO2 BB-Pellet Revolver is built a lot like the Webley MK VI .455 CO2 Shell Loading Revolver line, perhaps even made in the same factory in Taiwan? The Schofield No. 3 CO2 BB-Pellet Revolver is pretty much an all metal construction other than the plastic grips and any internal seals. The fit and finish is excellent with a great overall weight in the hand. The pistol grips is a lot like what you have with the Colt Single Action Army pistol but the Schofield No. 3 CO2 BB-Pellet Revolver is a lot more front end heavy because of its beefy barrel.

View fullsize

Realism: In terms of replicating a real steel Schofield No. 3 CO2 BB-Pellet Revolver for sure looks and feels that part. The reassessed barrel and well hidden CO2 screw don’t give anything away that the Airgun version is not the real deal. But as with all of these shell loading Airgun Revolvers, the shells are actually closer to a .380 Caliber in diameter rather than a 45 which is what the real steel Schofield No. 3 CO2 BB-Pellet Revolver would be designed for.

Available in the: Replica Airguns Store

View fullsize

Pros:

• If you are like a bulky revolver with good weight to it then the Bear River Schofield No. 3 is it.

• Can shoot Steel BB’s or Pellets since it comers with both shell types.

• Recessed barrel.

• Well concealed CO2.

• Shell loading design that loads from the back so no need to remove shells if you wish not to.

• Single Action Only hammer and trigger action feel good, nice and light with short take-up and release.

• Fairly discreet safety location right behind the hammer so easy to get at.

• Super easy to load, pellet shells can even be reloaded with shells in the gun if you are using the pellet shells.

• Really like the Nickel Finish on this gun.

• Can get simulated Ivory grips for it if you prefer that look.

Cons:

• Sights are not adjustable.

• Warning instructions on side of the frame.

• Barrel is not rifled for pellet use?

• Only a Single Action Only Hammer and Trigger but true to the style of the gun.

View fullsize

Comments:

Yet another classic shell loading CO2 BB Revolver, and again the more the merrier in my option! I like that you get 12 shells with our kit version, 6 removable shells for 4.5mm Steel BB’s and 6 removable shells for .177 caliber Pellets. The Schofield No. 3 CO2 BB-Pellet Revolver is for sure a hefty revolver but the pistol grip is not super large so even people with smaller hands should not have a problem shooting the Schofield No. 3 CO2 BB-Pellet Revolver. The real problem is deciding which Shell Loading Airgun Revolver to buy now since we have so many to choose from… Classic or modern, nickel or black, or perhaps weathered?

My Table Top Review for the Schofield No. 3 CO2 BB/Pellet Revolver:

• Buy the Schofield No. 3 CO2 BB-Pellet Revolver in Canada:

• Buy the Schofield No. 3 CO2 BB-Pellet Revolver in the US:

View fullsize

Here we have three very different products I Unbox and Preview for everyone. A Spring Piston multi-shot .177 Caliber Pellet Rifle, a single action BB/Pellet revolver that’s not a Colt! And a really nice looking Semi Auto Blank Pistol in a Chrome finish.

View fullsize

Let’s start with the Air Venturi TR5 Spring Piston 5-shot .177 Caliber Pellet Rifle. I think this is a really well thought out Air Rifle. It’s “almost a Bullpup” in design but it does actually load in front of the trigger just a bit, that said most of the spring piston is behind the trigger setup making it really compact yet with a longer than normal barrel compared to regular Break Barrel Spring Piston Air Rifles. The Air Venturi TR5 Spring Piston 5-shot .177 Caliber Pellet Rifle also has a side lever cocking mechanism along with a 5 round auto indexing magazine which makes it much quicker to cock and reload for fast follow-up shots, again compared to a standard Break Barrel Air Rifle, not to mention no barrel droop! The Air Venturi TR5 Spring Piston 5-shot .177 Caliber Pellet Rifle has a claimed fps of up to 500 so we are getting the max amount of velocity possible for our Canadian laws without making it a regulated firearm and requiring a PAL license. And by the way the Air Venturi TR5 Spring Piston 5-shot .177 Caliber Pellet Rifle does come in both a Lime Green and all Black version just in case you are not a fan of the Lime Green finish I show in this video.

View fullsize

Moving onto the Schofield No. 3 BB/Pellet 6 Shot Revolver Replica, if you like single action revolvers then take a look at the Schofield No. 3 BB/Pellet 6 Shot Revolver Replica. It’s a lot more bulky than a Colt Single Action Revolver and also has that top Break design that makes reloading quick and easy. The version we are selling inner Replica Airgun Online Store is the kit version that comes with 6 BB shells and 6 pellet shells so you can take your pick on ammo types. The barrel is not rifled so Steel BB’s will not hurt the Airgun and since pellets are skirted they do not need a rifled barrel to fly straight and true. You can expect around 445 fps for the Schofield No. 3 BB/Pellet 6 Shot Revolver Replica.

View fullsize

Last up is one of my favorite Blank firing Semi Auto Pistols which I have already full reviews in the all Black version so checkout those Video Reviews for more info on the ROHM RG-88 line of Front Firing 9mm Blank Pistols. All I really wanted to show you guys with the ROHM RG-88 9mm PAK Blank Pistol in Polished Chrome is how awesome it looked with the Polished Chrome finish and that we do have more choices now than we use to have in terms of what finish you can get your ROHM RG-88 in. Personally I like the Polished Chrome finish the best but you can also get it in all Black and Matte Chrome, so you decide which one you like the best.

View fullsize

I don’t do a lot of paintball gun reviews, they just don’t come across my table all that often so it’s a lot fo fun when I do get the chance to shoot some beefier caliber ammunition in the Replica Airguns Sea Can Indoor Airgun Shooting Range. Of course I use rubber ball ammo rather than standard paintball rounds in order to keep the mess to a minimum.

I have not done my Table Top YouTube Video Review yet for the Umarex T4E HDS Double Barrel CO2 Paintball Shotgun but you can checkout a Preview Video for now. In Summary the Umarex T4E HDS Double Barrel CO2 Paintball Shotgun is a pretty much exactly what the name says. It’s basically a sawn off pistol grip styled double barrel shotgun that uses CO2 and shoots .68 caliber paintballs. You have a selector for shooting either out of the left or right barrel or if you want to can even both at the same time but this really slows down the fps so I would not advise it with the 200 fps version that I was testing with.

View fullsize

Now on to the actual testing of the Umarex T4E HDS Double Barrel CO2 Paintball Shotgun! As alway I like to find out how close to the factory claimed fps I will get. Umarex claims around 200 fps for this version which is around 7.5 Joules of energy, apparently there is a 16 Joules version that shoots closer to 300 fps but we do not carry it at least right now. I put a couple fo rounds through my Umarex T4E HDS Double Barrel CO2 Paintball Shotgun using rubber ball paintballs which will be a little bit heavier than a standard paintballs and my first shot yielded 180 fps, my second shot was slightly higher at 184 fps so pretty close to the claimed 200 fps and that was in not the warmest of environments since the temperature in the Replica Airguns Sea Can Indoor Airgun Shooting Range was only 16 Degrees Celsius (60 Degrees Fahrenheit).

View fullsize

Next up it was time to see how the Umarex T4E HDS Double Barrel CO2 Paintball Shotgun performed shooting at a target setup 30 feet away. Since there are no actual sights on the Umarex T4E HDS Double Barrel CO2 Paintball Shotgun I had to kind eyeball it and as I shot it more and more I was able to get my shots closer to the center of the target. The Umarex T4E HDS Double Barrel CO2 Paintball Shotgun is not a tac driver but at 30 feet out you should be able to hit an 8-10 inch target pretty consistently. I don’t recommend using the double shot option since the same amount of CO2 is applied to both rounds that would normally be applied to one round decreasing the fps by about half making the paintball rounds shoot a lot slower and not really being that effective. This may be an option with the higher 300 fps version of the Umarex T4E HDS Double Barrel CO2 Paintball Shotgun.

So all in all I had a lot of fun shooting the Umarex T4E HDS Double Barrel CO2 Paintball Shotgun, it’s kind of like a big boy Nerf Gun that you can take onto the paintball field if you wanted to. For home defense I think it is a bit underpowered but there may be a little bit of shock factor that could slow someone down or deter them enough to either give you time get away or take shelter somewhere safe. Maybe using the pepper rounds would work OK in this situation? Either way the Umarex T4E HDS Double Barrel CO2 Paintball Shotgun is a really cool and unique CO2 Airgun that is not overly expensive and a welcome addition to any Airgun enthusiasts collection.

• Buy the Umarex T4E HDS Double Barrel CO2 Paintball Shotgun in Canada

• Buy the Umarex T4E HDS Double Barrel CO2 Paintball Shotgun in the US

View fullsize

In this Unboxing Preview video you really can’t get too much different in terms of product types. First up I showcase the Umarex T4E HDS Double Barrel .68 caliber CO2 Paintball Shotgun. I then take a look at the Diana Bandit PCP and Diana Chaser CO2 Bolt Action Match Grade .177 Caliber Pellet Pistols.

The Umarex T4E HDS Double Barrel .68 caliber CO2 Paintball Shotgun is a two shot short barrelled that could come in handy for CQB engagements but it looks to be designed also as a none lethal home defence weapon since you can load a CO2 without piercing it but when in a bind you simply hit the CO2 screw and it pierces the CO2 activating the gun for instant use. I will have to test this one out to see if it really has enough power to stop an intrude, after all you only get two shots so they better count!

View fullsize

And then we have two Diana Match Grade CO2 Bolt Action Pellet Pistols, both has a similar bolt, sights, barrel and trigger setup but with the Diana Bandit you get a wooden grips, an included 10 shot rotary magazine and it’s PCP powered so you will need a compressor or a pump to use it. The Diana Chaser on the other hand is CO2 powered, has a plastic pistol grip and does not include the 10 shot rotary magazine but you can buy it later on if you get bored loading one round at a time into the breach. I expect both of these pistols to be tack drivers!

View fullsize

The Umarex T4E HDS Double Barrel .68 caliber CO2 Paintball Shotgun is available in both our Canada and US Online Replica Airgun Store while Both Diana Pellet Pistols can only be found in our Canada Store.

• Buy the Umarex T4E HDS Double Barrel .68 caliber CO2 Paintball Shotgun in Canada

• Buy the Umarex T4E HDS Double Barrel .68 caliber CO2 Paintball Shotgun in the US

• Buy the Diana Chaser CO2 .177 Caliber Pellet Pistol in Canada

• Buy the Diana Bandit PCP .177 Caliber Pellet Pistol in Canada

View fullsize

If you have not already watched my Table Top Video Review for the Umarex T4E HK 416 Training Marker CO2 Paintball Rifle than make sure to do so if you are interested in more specifications and details.

I don’t often make many Paintball Review Gun Videos let alone Shooting Videos so this one is a bit different than the norm. Lucky for me I have some .43 caliber Rubber Paintballs that I can use in my Indoor Sea Can Shooting Range so as not to make a mess of things. As per usual I like to use a brand new 12 Gram CO2 Cartridge for my testing and for your reference the temperature was right around room temperature or 21 degree Celsius, 69 degrees Fahrenheit.

View fullsize

First up I generally perform my Chronograph test to see what the real world velocity or fps is for the Umarex T4E HK 416 Training Marker CO2 Paintball Rifle. I shot a short string of rubber rounds through my Chronograph and was able to get a 280 fps average with the Umarex T4E HK 416 Training Marker CO2 Paintball Rifle. This is plenty enough power for the intended target down range to feel the paintball effect without causing too much trauma.

With the remaining 10 rounds in my Umarex T4E HK 416 Training Marker CO2 Paintball Rifle magazine, I then setup a brand new paper target 30 feet down range and using a rested and seated shooting position and carefully unloaded the Umarex T4E HK 416 Training Marker CO2 Paintball Rifle into the target. I was a bit surprised to see the rounds spread out a fair amount perhaps as much as 10-12 inches but at least half where in the target rings.

View fullsize

I would not recommend the Umarex T4E HK 416 Training Marker CO2 Paintball Rifle as a long range paintball marker but it would be perfect for close quarters ultra realistic simulations. I would like to give actual .43 caliber paintballs a try outside to see if accuracy would be better, maybe the rubber balls grip the barrel a bit too much causing some random and unexpected spinning to occur? Either way the Umarex T4E HK 416 Training Marker CO2 Paintball Rifle is a really unique and fun Paintball Gun to shoot, maybe not for everyone but if you want the most realistic Paintball Marker then it would be a great option.

Buy in the Canada Replica Airguns Store or the US Replica Airguns Store

View fullsize

Type: Paintball Rifle.
Manufacturer: Umarex - T4E.
Model: H&K 416.
Materials: Metal & Polymer.
Weight: 3016 grams (6.65 pounds).
Barrel: Metal smooth bore.
Power Source: 1x12 gram CO2.
Action: Semi-Automatic with internal working bolt blowback action.
Ammo Type: .43 Caliber Paintball or Rubber Ball.
Ammo Capacity: 14 Rounds.
FPS: 330-460?

Trigger Pull: The trigger pull on Umarex T4E T4E HK 416 Training Marker CO2 Paintball Rifle is pretty typical of what you would find on an AR styled rifle. Since the internal bolt cycles with each shot, the trigger is engaged and the Paintball rifle is ready for the next shot with a very light and short single action trigger pull.

View fullsize

Accuracy: So far I have not had the opportunity to test the Umarex T4E T4E HK 416 Training Marker CO2 Paintball Rifle other than placing a few rounds down range into my ammo trap to see how it shot and felt. Without actually shooting rounds through the Chronograph I don’t really know what the fps velocity is going to be but I can say it felt like it was shooting perhaps even over 400 fps? Out of the box the Umarex T4E T4E HK 416 Training Marker CO2 Paintball Rifle was shooting rather low but you can adjust the rear sight for windage and elevation.

Build Quality: The build quality of the Umarex T4E T4E HK 416 Training Marker CO2 Paintball Rifle is very good since this Paintball gun is made for military and law enforcement training use. You’re going to find high quality metal and polymer where you would normally find them on the real steel version. The bolt carrier is expected to last at least 3000 shots but you do get an extra one included with it.

View fullsize

Realism: The fully licensed Umarex T4E T4E HK 416 Training Marker CO2 Paintball Rifle is about as realistic as you are going to get in a Paintball Rifle. It’s basically made very similar to a GBB Airsoft Rifle of the same type with a working bolt and pretty much all working parts on it. You can even break the Umarex T4E T4E HK 416 Training Marker CO2 Paintball Rifle down into the lower and upper receiver halves. The bolt blowback action is not super strong but this may be a good thing since CO2 usage will be more efficient allowing for higher fps and more shots per CO2.

Purchase it from the Canada Replica Airguns Store or the US Replica Airguns Store

View fullsize

View fullsize

Pros:

• Seem to have decent fps, will see when I do my Field Test?

• Full Size drop out magazine that holds 14 .43 caliber Paintballs and the CO2.

• Removable 4 position adjustable stock.

• Removable and adjustable iron sights.

• Lots of rials for adding accessories.

• Fully licensed H&K 4116 replica via Umarex.

• Blowback does give a bit of recoil feedback and allow for a true single action trigger.

• Very high quality metaled polymer build.

• Used as a training weapon for military and law enforcement.

• Comes with extra bolt carrier.

Cons:

• Very expensive, well over $1000!!

• Comes with blue hardware but can be swapped out (Pistol grip, But stock, Magazine).

• Bolt carrier may wear out at around 3000 rounds.

View fullsize

Comments:

If’ you’re looking for the ultimate in Paintball Rifle realism the Umarex T4E T4E HK 416 Training Marker CO2 Paintball Rifle is going to meet that requirement for sure. It will come at a pretty decent cost but you are going to have a very unique Airgun that not many people will own. And as they say you do get what you pay for which is realism, quality and reliability. I look forward to testing out the Umarex T4E T4E HK 416 Training Marker CO2 Paintball Rifle on the Chronograph using some rubber ball ammo, I may even take it outside for some paintball ammo shooting, we will have to see…

Buy in the Canada Replica Airguns Store or the US Replica Airguns Store

View fullsize

The question comes up often about which Airgun to buy. Customers are wondering when they are looking at a specific Airgun and they see several similar products but from different companies, are they the same gun and if so which one should they decide to buy?

One of the biggest Airgun suppliers out there is for sure KWC, their BB and Airsoft guns are redistributed through companies like Umarex, Crosman, Sig Sauer, ASG, Gletcher and more. Often times the companies that redistribute KWC Airguns hold licensing agreements with real gun manufacturers like Smith & Wesson, Glock, Colt, Beretta, Sig Sauer, Taurus to name a few… KWC makes the Airguns in their Taiwanese factory but they are not allowed to put a real gun manufacturer license on the Airguns they distribute directly so KWC distributed Airguns will generally be all black.

View fullsize

I have also seen companies like Umarex distribute a new KWC Airgun that I have not seen yet from KWC, I believe KWC works with these big name Airgun companies directly and will build a new gun or variation of an existing KWC Airgun for them and give that Company an exclusive for a period of time. KWC will eventually regain the rights to sell that Airgun model directly after 6 months to a year.

Now that you know a little bit more on how it all works let’s get back to whether you should buy a KWC branded Airgun or other Brands same Airgun. It really comes down to I would say three factors. Do you want a Licensed version of the Airgun you are buying? Is there a price difference? Which gun is available to buy when I am ready to buy?

View fullsize

When you buy the Licensed version of the KWC Airgun redistributed through a third part Airgun Company you will often get a lot more writing on the Airgun than just the Gun Manufacturers name. Warning information comes to mind and does not look all that attractive on the slide where it is usually found in bright white lettering. If you like a cleaner look and don’t mind the lack of licensing then the KWC distributed version will generally be all back, nice and clean looking.

View fullsize

You would think buying the KWC Version that is sold more directly to the end customer would be the less expensive of the options because less hands are involved in the selling process. This is not always true, it is more about supply and demand, if more people want the cleaner looking KWC version but it’s harder to get ahold of than the price of the KWC version may actually be higher than say the Umarex or Crosman version. So shop around if price is the deciding factor as the guns are going to be mechanically the same with just some slight cosmetic differences between them.

Lastly, availability maybe what eventually leads you to buy a KWC version over an Umarex, or Crosman or Sig version since if the gun is not in stock well you may have limited options and so the one in stock is going to be perhaps your only option! Don’t feel like you got short changed, again these guns are virtually all the same at the end of the day no matter if you buy it from KWC, Umarex, Crosman, Sig Sauer, ASG, Gletcher or whomever.

• Buy KWC Airguns in Canada

• Buy KWC Airguns in the US

View fullsize

I’ve reviewed a lot of the Single Action Army Revolvers to date in a variety of 4.5mm Steel BB and .177 caliber lead pellet shooting versions but so far I have not reviewed any 6mm Airsoft versions, until now!

In this Field Test Shooting Video Review I test out the Umarex Legends Wildcard 45 CO2 Airsoft Revolver to see what the actual real world fps is and also shoot at a paper target 30 feet down range to see what kind of accuracy I can get from it.

View fullsize

Starting with my Chronograph test. I placed 6 shots using my Umarex Legends Wildcard 45 CO2 Airsoft Revolver through the Chronograph and averaged them out getting a result of 342 fps. Not bad considering Umarex claims only 335 fps. I was using .20 gram plastic Airsoft BB’s with a brand new CO2 and the indoor temperature was 22 degrees Celsius or about 70 degrees Fahrenheit which is a fairly neutral temperature for testing a CO2 Airgun.

View fullsize

Next I loaded up my Umarex Legends Wildcard 45 CO2 Airsoft Revolver this time with .32 gram plastic Airsoft BB’s and shot the full 6 round cylinder on my paper target 30 feet away using a rested seated position. 5 of the rods all shot within about 3 inches while one came outside of this just a bit. The Umarex Legends Wildcard 45 CO2 Airsoft Revolver shot really well center on the target and since there are no sighting adjustments or hop-up adjustments this is good news!

View fullsize

I’m not really sure if a six shot single action only revolver is really going to be your best option for an Airsoft battle but hey who am I to say. The Umarex Legends Wildcard 45 CO2 Airsoft Revolver does have about the right fps for close quarter shooting and shoots on target at least at 30 feet or more so in those regards it’s just fine. Low ammo capacity, not so quick reloading and having to cock the hammer for each shot could be a limiting factor but if the old west cowboys could clear a room in seconds with these six shooters then why not give it a go!

• Buy the Umarex Legends Wildcard 45 CO2 Airsoft Revolver in Canada

• Buy the Umarex Legends Wildcard 45 CO2 Airsoft Revolver in the US

In this Update Video we take a look at some BB and Airsoft pistols I have already reviewed but in a slightly different form factor. They are all Umarex Legends pistols but two of them (The P.08 and M712) are WWII Special Editions versions with that aged weathered look to them.

The Umarex Single Action Army Wildcard .45 is in 6mm Airsoft which I have so far not review in a Single Action Army Revolver so not only will I be showing you this one up close, but I will be doing a followup Field Test Shooting video for it shortly.

Here are some basic specifications on these three Airguns:

View fullsize

Umarex WWII Limited Edition M712 Full Auto Blowback BB Pistol

Type: BB Pistol
Manufacturer: Umarex
Model: WWII Limited Edition M712
Materials: Full Metal
Weight: 1424 grams (3.15 pounds)
Barrel: Smoothbore
Power Source: CO2
Action: Semi and Full Auto
Ammo Type: 4.5mm BBs
Ammo Capacity: 18 Rounds
FPS: 360

• Buy the Umarex WWII Limited Edition M712 BB Pistol in Canada

• Buy the Umarex WWII Limited Edition M712 BB Pistol in the US

View fullsize

Umarex WWII Limited Edition P08 CO2 Blowback BB Pistol

Type: BB Pistol
Manufacturer: Umarex
Model: WWII P08
Materials: Full Metal
Weight: 808 grams (1.7 pounds)
Barrel: Smoothbore
Power Source: CO2
Action: Semi and Full Auto
Ammo Type: 4.5mm BBs
Ammo Capacity: 21 Rounds
FPS: 300

• Buy the Umarex WWII Limited Edition P08 Blowback BB Pistol in Canada

• Buy the Umarex WWII Limited Edition P08 Blowback BB Pistol in the US

View fullsize

Umarex Legends Wildcard Airsoft Revolver

Type: Airsoft Pistol
Manufacturer: Umarex
Model: WildCard .45
Materials: Full Metal
Weight: 454 grams (16 oz)
Barrel: Smoothbore
Power Source: CO2
Action: Revolver
Ammo Type: 6mm Airsoft BBs
Ammo Capacity: 6 Rounds
FPS: 325+

• Buy the Umarex Legends Wildcard Airsoft Revolver in Canada

• Buy the Umarex Legends Wildcard Airsoft Revolver in the US

This year at SHOW Show 2019 Bob from ASG had a lot to show me so make sure to watch the full Interview Video for all the details and information.

Bob and I first go over a new ASG CZ Airsoft Pistol called the Shadow 2 kind of like a modernized SP-01 Shadow. The ASG CZ Shadow 2 is a competition stile pistol with adjustable sights and trigger and will come in both CO2 and Green Gas magazine options.

View fullsize

Next up Bob showed me the CZ75 SP01 ACCU Shadow with some special edition features like: Ergonomic anodized aluminum grips with grip tape, match style high sights, oversized slide release and ambidextrous safety and a tunable anodized aluminum trigger.

View fullsize

ASG being the exclusive partner with ICS had some new ICS Pistols to show us. First up was the Airsoft ICS XPD, a compact Gas Blowback System that will come with shorter compact magazines and extended magazines that will hold more green gas. Both Gas magazines will feature a new valve system called the Revo system.

View fullsize

If you like the feel of a 1911 but perhaps want something a bit more modern then checkout the New ASG Korth PRS Airsoft Pistol, you can even put real 1911 grips on it!

View fullsize

Not new to ASG this year is the CZ Scorpion Evo 3 A1 but ASG has enhanced this Airsoft rifle by working with a designer to adding an M-Lok Handguard, Magwell Grip and Fore Grip that will be a three part system you can customize.

View fullsize

Last Bob showed me around the CQR Hera Arms Airsoft Rifle that is a collaboration of ASG, Hara Arms, ICS. It will come in standard Mosfet and Triple-S (Smart Shooting System).

View fullsize

Looking forward to getting my hands-on some of these new ASG

View fullsize

This may be a bit confusion to some of you but Crosman has done a bit of a rebrand and is now going by the name of Velocity Outdoor. This is because Crosman has been acquiring more and more products over the years that are not necessarily airgun related and felt that putting all the brands under the name Velocity Outdoor made more sense from a company stand point. Of course in this video we are going to focus in on the Crosman Products within Velocity Outdoor.

View fullsize

So what’s new? Well an even better Crosman DPMS SBR! How can you make the Crosman DPMS SBR even better? By creating an updated or version 2 called the Bushmaster MPW. It comes in two tone black and false dark earth with a shorter hadnguard yet it keeps it’s barrel leith by extending the barrel right to the end of the mock suppressor. Tis can also swap out the but stock with any AR but stock and the Bushmaster MPW comes with a red dot sight. Internally the Bushmaster MPW and the Crosman DPMS SBR are the same.

View fullsize

Some of you may remember the Crosman Night Stalker CO2 Pellet Rifle? That product was retired years ago but Crosman has used the name in a new CO2 BB Pistol called the Night Stalker. The Crosman Night Stalker Pistol has a built in guide rod styled laser, has blowback operation along with a stick magazine. This should be a fun plinker with its laser sight.

View fullsize

Going even further back to the old Crosman 357 days, this revolver styled CO2 air pistol just seems to live on and on being revamped just a little each time by Crosman. Now you can get it in their Triple Threat package. Basically it’s the same Crosman 357 frame that comes with three barrels you can swap out as needed. You get a three inch snub nosed barrel, a six inch barrel similar to the Vigilante and then an eight inch Dirty Hairy styled barrel. Who says you can’t have it all?

If you haven’t already watched My Table Top Video Review for the ROHM RG-89 .380 Caliber Blank Revolver than make sure to do so for the full features and specifications.

My Field Test Shooting videos for blank guns are pretty basic! I can’t test for accuracy since there is no bullet hitting a target and similarly since there is no bullet I can not test the velocity or feet per second power. SO what is there really left to test?

I guess will the blank gun I am testing fire when I pull the trigger? That’s all there is to really test. You may ask why even make a Field Test Shooting Video for a blank gun if you can’t test accuracy and power. I’ll tell you why… Because it’s just fun and it looks good on camera :)

So watch my YouTube video of me popping of some .380 caliber blanks with my ROHM RG-89 .380 Caliber Blank Revolver inside the Sea Can Airgun Shooting Range.

• But the ROHM RG-89 .380 Caliber Blank Revolver in Canada.

• Buy ROHM Blank Guns in Canada.

View fullsize

Type: Blank Revolver.
Manufacturer: ROHM (RÖHM).
Model: RG-89
Materials: Mostly Metal.
Weight: 1.45 pounds (658 grams).
Barrel: Front firing designed for attaching a flare adaptor.
Propulsion: Gun powder.
Action: Single & double action.
Ammunition Type: 9mm / .380 caliber crimped.
Ammunition Capacity: 6 rounds.
FPS: N/A.

View fullsize

Trigger Pull: The trigger pull on the ROHM RG-89 .380 Caliber Blank Revolver in single action is fairly light weight with virtually no take up at all as you would expect from a revolver. The double action trigger pull is much heavier with a smooth release. Mechanically the trigger feels really solid.

Accuracy: NA.

Build Quality: The overall build quality for the ROHM RG-89 .380 Caliber Blank Revolver is excellent, being German made its built to last and the fit and finish is typical German quality. There are steel parts where they need to be like in the barrel, pins, screws and reenforcing parts, the rest of the gun is generally made out of a zinc alloy otherwise know as pot metal with only the moulded grips being made out of plastic.

View fullsize

Realism: The ROHM RG-89 .380 Caliber Blank Revolver is not an exact replica of any given gun in production as this would make importing it into Canada even more difficult, but it is styled after a Snub Nosed type Revolver. As for looking like and working like a real gun, the ROHM RG-89 .380 Caliber Blank Revolver looks and sounds as loud as a real gun, of course with the exception of the dangerous bullet coming out of the barrel!

Purchase from: The Replica Airguns Canada Store

View fullsize

Pros:

• German made Quality.

• All metal gun with reenforced steel in some areas.

• Front firing gun.

• Large caliber makes a bigger bang.

• Higher 6 shot capacity over RG-59.

• Chrome (Silver) finish is very nice.

• Also like the moulded grips on the Chrome version.

• Comes with Flare Adaptor & Cleaning Rods.

• Comes in a nice foam lined plastic hard shell case.

• Right now Rohm is the only blank gun brand we can get in Canada.

View fullsize

Cons:

•  Double Action trigger pull is a bit heavy.

• Have to make sure you only shot them where you will not get in trouble. Very loud!

• Expensive due to them being harder to get and in high demand in Canada.

View fullsize

Comments:
I think the ROHM RG-89 .380 Caliber Blank Revolver especially in the Chrome (Nickel) version is one of the nicest looking ROHM Blank guns we stock. The additional size over say a ROHM RG-59 makes it feel a lot more beefy in the hand, you also get the extra 6th 9mm / .380 caliber blank with the larger cylinder of the ROHM RG-89 .380 Caliber Blank Revolver. Anther bonus with the Chrome or Nickel version is that you get moulded grips that again I feel looks and fells better in the hand. Along with the ROHM RG-88, the ROHM RG-89 .380 Caliber Blank Revolver is one of my Top ROHM Picks!

My Full Video Review for the ROHM RG-89 .380 Caliber Blank Revolver:

• But the ROHM RG-89 .380 Caliber Blank Revolver in Canada

• Buy ROHM Blank Guns in Canada

View fullsize

I’ve already full reviewed the BB version of the Webley MKVI .455 CO2 Shell Loading Revolver so make sure to check both my Table Top and Field Test Shooting Reviews for the Webley MKVI .455 CO2 Shell Loading BB Revolver.

In this Field Test Shooting Video Review I test out the Pellet version of the Webley MKVI .455 CO2 Shell Loading Revolver to see how well it performs in the Indoor Airgun Shooting Range. I first put 5 shots through my Chronograph to see what the real world fps is and then I shoot a full cylinder of pellets at my paper target setup 30 feet down range so we can get an idea on how accurate the Webley MKVI .455 CO2 Shell Loading Pellet Revolver really is.

View fullsize

For my Chronograph velocity portion of this test I used a brand new CO2 with 8.18 grain Sig Sauer lead pellets, the indoor temperature was around 18 degrees Celsius or 64 degrees Fahrenheit. My Webley MKVI .455 CO2 Shell Loading Pellet Revolver was about to average 351 fps with fairly heavy lead pellets, not bad! IN warmer conditions or using lower weight higher velocity pellets I am sure the fps will get up and over 400 feet per second.

View fullsize

Next I reloaded the 6 round cylinder with the same 8.18 grain Sig Sauer lead pellets and placed them in on target 30 feet down range. I was shooting in Single Action for best accuracy and also using a rested seated shooting position with a sand bag up front to rest my hands on. I was very impressed with who well centered the Webley MKVI .455 CO2 Shell Loading Pellet Revolver shot, I even got 3 rounds right in the bullseye, 3 of the rounds go outside the bullseye just a bit to the right resulting in about a 2 inch 6 shot grouping. I am sure I could tighten this up with a bit more trigger time using the Webley MKVI .455 CO2 Shell Loading Pellet Revolver

View fullsize

If your looking for a more beefy shell loading revolver than for sure consider the Webley MKVI .455 CO2 Shell Loading Revolver line, both the BB and pellet versions perform well and the break barrel design makes them super easy to reload without even having to take the shells out if you choose not to. Accrued and power is up to par and the over quality is also very good.

• Buy the Webley MKVI .455 CO2 Shell Loading Pellet Revolver in Canada

• Buy the Webley MKVI .455 CO2 Shell Loading Pellet Revolver in the US

• Buy the Webley MKVI .455 CO2 Shell Loading BB Revolver in Canada

• Buy the Webley MKVI .455 CO2 Shell Loading BB Revolver in the US

In this December Update Video I wish everyone a Merry Christmas and Happy New Year. If you have other beliefs and perhaps don’t celebrate Christmas in the traditional Canadian fashion then I wish you a Happy Holiday!

I received a number of products lately and really don’t have time to do full reviews of them as the Holliday season is on us which is going to limit how many videos I can pump out over the next couple of weeks so hopefully this Update video will keep everyone excited about the future Replace Airgun Videos.

Here are the items I talk about in this December 2018 Update Video:

View fullsize

Sig Sauer ASP M17 CO2 Blowback Pellet Pistol

• Buy Sig Sauer Airguns in Canada

• Buy Sig Sauer Airguns in the US

View fullsize

Sig Sauer Fake Suppressor for P226 ASP Pellet Pistol

• Buy in Canada

• Buy in the US

View fullsize

Umarex Steel Strike Full Auto BB Rifle

• Buy in Canada

• Buy in the US

View fullsize

ROHM RG-89 .380 Caliber Blank Revolver

• Buy in Canada

• Buy in the US

View fullsize

Umarex Legends WildCard Airsoft SAA Revolver

• Buy in Canada

• Buy in the US

View fullsize

Umarex WW2 Limited Edition P08 CO2 Blowback BB Pistol

• Buy in Canada

• Buy in the US

View fullsize

Umarex WW2 Limited Edition M712 Full Auto CO2 Blowback BB Pistol

• Buy in Canada

• Buy in the US

View fullsize

Webley Mark VI CO2 Pellet Revolver

• Buy in Canada

• Buy in the US

View fullsize

John Wayne Signature SAA Revolver Solid Maple Wood Case

• Buy in Canada

• Buy in the US

I have some harder to get here in Canada Blank Guns that I am selling from my personal collection by way off Silent Auction. These Blank Guns are more for the Canadian collector and perhaps not so much for the first time buyer. I would recommend for the first time Blank Gun buyer that you checkout our selection off brand new ROHM Blank Guns that we sell in our Canada Replica Airguns Store so check those ROHM Blank Guns out as they are excellent German made Blank Guns in a variety of styles.

Getting back to the Blank Guns in my personal collection. They are all previously owned, most only test fired once for review. Below is a listing of the Blank Guns I am offering in this Silent Auction with what I feel is there approximate value:

View fullsize

• ARAL 622K Black 9mm PAK Front Firing New (Just fired once for review video): $299

View fullsize

• EKOL Aras Compact 9mm PAK Gloss Black Front Firing (New Condition): Missing magazine, should be able to buy and import magazine into Canada pretty easy. Takes the same magazine as most of the EKOL Blank Guns (Jackal, Dicle, ASI, Firat) $299

View fullsize

• Bruni Mod. 92 8mm PAK Black Top Venting in working condition: A bit weathered but still looks good and super solid gun. Comes in a real Beretta case. $299

View fullsize

• EKOL Arda 8mm PAK Gloss Back (Just fired once for review video): $199

Here is how the silent action system works… First of all I will only be shipping these guns within Canada to a Canadian addresses and all funds are in Canadian Funds. You will need to email me and let me know which Blank Gun or Blank Guns you are interested in bidding on and let me know what your best price is. In approximately a weeks time when I feel enough offers have come in, I will then contact the winning bidder and give them 24 hours to pay up. If they do not pay me the amount they offered within the 24 hours I will then move on to the next highest bidder.

If you are bidding on more than one gun then I will take this into consideration since collecting money and shipping product to one buyer is easier than multiple buyers so this will help you with your offer.

I also will be charging $20 for shipping per gun, if you are buying multiple guns then I will discount the shipping a little bit so I will not charge you $20 per gun.

Email me here:

mike(at)replicaairguns(dot)com

View fullsize

Some more stuff came in and I just had to show it off before moving on with the reviews. I know you're going to like it so here we go again...

View fullsize

First off the super anticipate Umarex Glock 19 CO2 BB Pistol has arrived and is now available in our Canada and US online Replica Airgun Stores so get yours while we still have them, if we still have them? No this version is not a blowback or even working slide version and yes it has the dreaded stick mag! That all said the Umarex Glock 19 CO2 BB Pistol feels really solid and well made and heck it's the first licensed Airgun Glock ever so it's a good start. Umarex has said that more elaborate blowback versions will be coming out down the road. There are full blowback Airsoft version licensed by Umarex but the FPS is too slow right now for us to import them into Canada, hopefully there is a fix for this at some point...

I have been waiting at least three months now for my AW Custom AG-HX2003 Double Stack Tactical 1911 Full Blowback CO2 BB Pistol to show up. Canada Customs got their hands on it and felt it needed to be processed for three months before delivering it to me. at least I did end up getting it without a fight!

View fullsize

AW Custom is primarily an Airsoft gun manufacturer but is moving into the 4.5mm Steel BB market and has a few 4.5mm Steel BB offerings which have interchangeable parts with their Airsoft guns if you need them. I will making a Table Top and Field Test Sooting Video for the AW Custom AG-HX2003 Double Stack Tactical 1911 Full Blowback CO2 BB Pistol, my list is getting pretty huge now but I am excited I have all these new products to review for everyone!

View fullsize

Last on my Update list is a rather pricey one but not something I have ever revised on this channel, It's the Umarex T4E HK416 .43 caliber Paintball M4/AR Rifle made specifically for m military and police training. This gun is super realistic with similar working parts to its real steel counterpart. Check the Umarex T4E HK416 .43 caliber Paintball M4/AR Rifle in our Canada and US Online Stores.

Beginning Saturday Jun 30th and ending Monday July 2nd we are having a Replica Airguns Canada Day Sale on airsoft guns, ammo, gear, and accessories. This is only in our Canada Replica Airguns Store!

We often think that something that is more expensive and perhaps built with what we consider to be better materials is going to be the best option. That's not always the case! In this Vimeo Video I talk about some of the Pros and Cons to buying a Plastic Airgun versus a Metal Airgun. Of course this applies to BB, Airsoft and Pellet shooters.

Price
In most cases a Plastic Airgun is going to be less expensive, so if you have limited funds then your only option may be a Plastic Airgun and at the end of the day both airguns are going to probably get the job done much the same.

Realism
Generally speaking, most Metal Airguns are going to have more moving parts, often times with working slides and even blowback operation. This is not always the case but even a Metal Airgun that has few working parts will still feel more realistic simply because of the additional weight to the Airgun. Metal has that cold hard feel to it that makes you feel like you're holing something of substance. Plastic Airguns on the other hand can feel light and cheap and usually are very simple in design with less working parts.

Shooting an Airgun with blowback operation simulates the recoil action and in many cases allows for true single action operation of the trigger and hammer. This is going to feel a lot more realistic than shooting a non-blowback Airgun which again is generally what you get with Plastic Airguns.

Durability
Most people assume that because an Airgun is Meta, it is going to be stronger and more durable. This would be true if the Metal used in the Airgun was actually hardened steel but with almost Metal Airguns, they are made using a zinc alloy metal (Pot Metal) that is much softer then hardened steel and can wear and break a lot easier. When you also consider a Metal Airgun is going to be a lot heavier than a Plastic Airgun, a drop onto a hard surface will have a lot more impact which can cause breakage a to a heavy Metal Airgun versus a Plastic light weight Airgun.

Plastic surfaces are also a lot less prone to showing scratches since the Plastic material will usually be black all the way through versus a Metal Airgun that has a painted surface that when scratched hard enough will show through right to the bare metal. You also get wear marks on painted Metal Airguns that will make it look used and older, some people like this look but other do not.

Reliability
Again people are going to assume a Metal Airgun is going to be more reliable simply because it has more metal parts and metal parts are stronger right? Not the case if the parts are made out of zinc alloy. Now some companies will upgrade some high use parts in Airguns to hardened steel but it's hard to know for sure. You can use a magnet to determine what parts are Metal and what parts are hardened steel.

As we mentioned before, Plastic Airguns are generally pretty simple in design, less working parts means less to go wrong at the end of the day so just because you have a Plastic Airgun it doesn't mean it's going to break on you quickly. Actually it may even outlast your Metal Airgun since all those working parts will eventually wear out.

Now I am the first person to admit that I prefer Metal Airgun over Plastic Airguns, I don't mind spending the extra money for more realism and I'm willing to accept the fact that it's not going to last forever but the fact remains, a Plastic Airgun does have some advantages going for it so don't rule them out completely.