Type: BB Rifle. Manufacturer: ASG. Model:TAC 4.5. Materials: Plastic with some internal metal parts. Weight: 3.5 pounds (1588 grams). Barrel: 12 inches, metal non-rifled. Propulsion: 12 gram CO2 x 1. Action: Semi auto, double action only. Ammunition Type: 4.5mm BB's. Ammunition Capacity: 21 round metal stick magazine. FPS: 417.
Trigger Pull: The double action only type trigger pull on the ASG TAC 4.5 CO2 Air Rifle is not too heavy but it is rather long so really quick rapped fire shooting will require some finger work. The trigger reset is right at the begging of the pull so you need to make sure you allow the trigger full range of motion or you may miss the odd shot.
Accuracy: I haven't done my Field Test Shooting video just yet for the ASG TAC 4.5 CO2 Air Rifle but hope to do it soon so stay posted for that video. ASG claimed the fps to be right around 417 but I have a feeling it shoudl come in a little bit higher than this since there is no blowback and the barrel is close to 12 inches long, With the fiber optic front sight and fully adjustable rear peep sight I shoudl be able to get some decent rounds on target downrange and hopefully get a nice grouping.
Build Quality: The ASG TAC 4.5 CO2 Air Rifle is mostly plastic but feels pretty good in the hand with decent fit and finish. There are some metal internal part along with the outer barrel but for the most part the ASG TAC 4.5 CO2 Air Rifle is all plastic including the trigger and front and rear sights.
Realism: The ASG TAC 4.5 CO2 Air Rifle is not a replica of any modern rifle that I know of but it does look a bit like a Beretta CX4 Storm especially the back half of it. The flash hider and top and bottom raise add to the realism. Available From: The Replica Airguns Store.
Pros:
Very customizable with rails top and bottom.
Comes with a rather nice Bipod.
Front and back Iron sights are very usable.
Safety switch is in a great location for right handed shooters.
Integrated laser add on is a nice touch.
Solid construction.
Rubber Butt Pad is nice and thick.
Removable barrel to reduce size for easier transportation.
Also come in Airsoft version.
Cons:
DOA Trigger pull is a bit long which will slow down rapid fire shooting a bit.
Mostly Plastic Polymer build.
Why not a longer inner barrel for possible more fps?
Comments: It's nice when a new action shooting air rifle comes out on the market since there are not a ton of them. The ASG TAC 4.5 CO2 Air Rifle is a nice addition if you're looking for a BB shooter for plinking around the yard. You can also get an Airsoft firing version too called the ASG TAC 6 CO2 Airsoft Rifle if you want to shoot some rounds that are a little bit less destructive and more game friendly. The ASG TAC 4.5 CO2 Air Rifle offers a lot of customizability with its top and bottom rails for accessories which allow for the placement of the included removable iron sights and Bipod. I would recommend adding a red dot sight and perhaps even a tac light to really dec out this modern looking air rifle.
My Vimeo Table Top Review Video for the ASG TAC 4.5 CO2 Air Rifle:
I don't generally make unboxing videos, usually I'll make a preview video if I want to get the word out that I have a new product for review but I thought I would change things up a bit with the ASG TAC-4.5 CO2 Air Rifle Unboxing Video. There are actually two version of this rifle, the TAC-4.5 and the TAC-6. The ASG TAC-6 CO2 Air Rifle is the Airsoft equivalent, pretty much identical to the TAC-4.5 with the acceptation of shooting 6mm Plastic Airsoft BB's.
Getting back to the ASG TAC-4.5 CO2 Air Rifle, it uses a standard 12 gram CO2 cartridges to shoot 4.5mm Steel BB's at around 417 fps. The BB's are stored in its 21 round metal stick magazine similar to what you would find in many standard BB pistols. I'm pretty sure this rifle is actually internally a pistol of sorts and even the barrel internally is short like a pistol. The external longer barrel that you see is mainly for show to give the ASG TAC-4.5 CO2 Air Rifle its rifle appearance. The TAC outer shell is made of synthetic plastic keeping the ASG TAC-4.5 CO2 Air Rifle fairly light at around 3.5 pounds.
You will find Weaver/Picatinny rails top and bottom with removable fiber optic iron sights and a removable Bipod with adjustable legs. The rear stock has a rubber Buttplate for added comfort. I found it interesting that the ASG TAC-4.5 CO2 Air Rifle has an area right at the front in the stock for an optional laser sight.
Look forward to a more detailed Table Top and Field Test Shooting Video coming out shortly for the ASG TAC-4.5 CO2 Air Rifle.
I'm trying to remember if I have ever reviewed a Gas Operated Bolt Action Airsoft Rifle before or not? I know I have reviewed Spring Operated Bolt Action Airsoft Rifles but I think this is a first for me. With Spring Bolt Action Airsoft Rifles there is some work involved in the back and forth movement of the bolt since the power is coming from the spring tension, compared to a Gas Bolt Action Airsoft system there is virtually no resistance in the bolt so you can get off your follow up shots a lot quicker.
I would like to get out and test the KJWorks M700P Gas Bolt Action Airsoft Rifle at a much longer distance than here in my Indoor Sea Can Airgun Range but the weather outside right now is kind of cold and wet. Perhaps in the summer I can do a revisit of the KJWorks M700P Gas Bolt Action Airsoft Rifle and test it out at amuch longer range using heavier Airsoft BB's.
For this indoor short range testing I used .20 gram Plastic Airsoft BB's and placing 5 shots through my Chrony Chronograph I got a an average of 382 fps. The gas magazine was fully topped up using propane gas and the temperate was around 15 degrees Celsius (60 degrees Fahrenheit).
Again using .20 gram Plastic Airsoft BB's I then performed my close range accuracy test (about 30 feet away) and the KJWorks M700P Gas Bolt Action Airsoft Rifle shot about a 1.5 inch grouping with one outlier that went kind of low, perhaps a bad Airsoft BB? With most sniper style Airsoft rifles you will want to use heavier gram Airsoft BB's which should help with accuracy so I would expect the KJWorks M700P Gas Bolt Action Airsoft Rifle to tighten up a bit using a .30 or higher gram BB.
If you haven't already, make sure to watch my Table top Video Review for the Cybergun Taurus PT24/7 G2 Airsoft Pistol to see it up close and get all the details and specifications on this fine Airsoft pistol.
In this Field Test Shooting Video I put the Cybergun Taurus PT24/7 G2 Airsoft Pistol through its paces to see what the fps velocity is and what kind of accuracy grouping we can get. Starting with power, I shot 5 rounds of .20 grain plastic Airsoft BB's through my Chrony Chronograph and average 410 fps, that's pretty fast for a blowback Airsoft pistol!
Next up was the accuracy portion of this shooting review and as I alway do here in my indoor Sea Can Shooting Range, I setup a paper target 30 feet away and shot from a seated stabilized position. I did find the Cybergun Taurus PT24/7 G2 Airsoft Pistol shot a bit high for me right out of the box without any hop-up adjustments. In terms of accuracy the Cybergun Taurus PT24/7 G2 Airsoft Pistol did not perform as well as I would have liked it to, perhaps a different ammo choice and or playing around with the hop-up may have helped but either way I got around a 7 inch 10 shot grouping. This is perfectly fine for close quarter combat but if you plan on hitting anything far away, the Airsoft BB is fast enough to get there but sniper accuracy is not going to happen.
Overall the Cybergun Taurus PT24/7 G2 Airsoft Pistol feels great to shoot, it has a really nice trigger and solid blowback action. Perhaps with a little bit of playing around with this quality Airsoft pistol I could get it to tighten up its grouping a little bit?
Hopefully we are back in business after the YouTube Attack on Airgun channels. I'm still waiting for YouTube to get back to me on the video that they put a strike on. I did appeal the Strike but so far YouTube has not responded...
We must push forward and so here is my first video back and it's a good one! If you haven't already watched my Table Top Review of the Umarex SA10 CO2 Blowback Pellet and BB Pistol, make sure to check it out for details and some nice up and close video of this fine dual ammo CO2 air pistol.
As always during my indoor Sea Can Field Test Shooting videos, I first test out the velocity of each gun. Since the Umarex SA10 CO2 Blowback Pellet and BB Pistol can shoot both 4.5mm Steel BB's and .177 caliber pellets I tested both ammo types using my Chrony Chronograph. I fired three shots of each ammo to get an average fps velocity. Interestingly the heavier 6.9 grain lead pellets had the higher average velocity of 376 fps versus 304 fps with 5.1 grain Steel BB's. I have a feeling the lead pellets fit the barrel more snug and did not let any of the CO2 blow by creating more back pressure and a higher velocity.
After my velocity test I proceeded to find out which ammo type was going to be more accurate with the Umarex SA10 CO2 Blowback Pellet and BB Pistol. Since each rotary magazine holds 8 rounds it made sense for me to put 8 shots of each ammo type into the paper target setup 30 feet away. Keep in mind the Umarex SA10 CO2 Blowback Pellet and BB Pistol has a riffled barrel best suited for lead pellets so going into this test I was expecting the pellets to be the clear winner here.
I was able to get about a 2 inch 8 shot grouping using .177 caliber lead pellets with the Umarex SA10 CO2 Blowback Pellet and BB Pistol. All shots where fairly well centered but I did notice that most shots actually hit all within a very tight 1/2 inch group with 3 shots coming out a bit and extending the grouping more or less vertically. Switching up the ammo to steel BB's and as expected the groupings extended to about 3 inches with one outlier hitting very wide for some reason? Even with the steel BB's shot placement on the target was well centered in general.
The blowback on the Umarex SA10 CO2 Blowback Pellet and BB Pistol is very pronounced but does not rock your hands too much keeping this airgun on target between shots and the trigger is one of the best rotary mag type trigger I have tested to date, extremely smooth throughout the entire trigger pull. Overall the Umarex SA10 CO2 Blowback Pellet and BB Pistol has great looks, decent power and good accuracy going for it and could perhaps be one of my top pics if you're looking for a blowback pellet pistol option.
This is not a BB Gun Review or an Airsoft Gun review or a Pellet Gun review or a Blank Gun review or even an Accessory review? Heck it's not even a Nerf Gun review and I have even done that on this channel :)
What we have here is my first ever Sling Shot based review and even that is not the best description for the Pocket Shot but it's about as close as I can get and really the only product I can compare to the Pocket Shot is a Slingshot. Spoiler alert I think the Pocket Shot kicks but on most traditional Slingshot designs.
I did want to thank the team over at Pocket Shot for supplying me with their Pocket Shot and Pocket Hammer Grip for review, hopefully we can even bring this updated Slingshot design to our Replica Airguns Online Store.
What makes the Pocket Shot different than a standard Slingshot. Mainly the Pocket Shot utilizes a rubber stretchy cup or pouch rather than standard rubber tubes used on Slingshots. The benefit to the Power Shot design is that it is way more compact and much easier and quicker to load since you simply drop your ammo into the cup, pull back and release. So no having to place your ammo into a small pouch with each shot. The Pocket Shot is also more powerful than most Slingshots on the market, you can expect to get up to 350 fps using a Pocket Shot as compared to apron 200 fps from a Slingshot.
Pocket Shot also sent me out there Pocket Hammer Handle that allows the regular Pocket Shot to convert into a more traditional Slingshot grip system. This setup adds a little bit more bulk to the Pocket Shot but allows for a much easier draw.
Another huge advantage to the Pocket Shot is the ability to even shoot arrows by simply adding on their Whisker Biscuit Cap. Make sure to checkout the Pocket Shot website for more info and of course watch my Table Top Review for the Pocket Shot Slingshot. I will be making a Shooting video in the near future.
Wow! 100,000 Subscribers, and that was almost two years ago now. It took a while for YouTube to send me out my One Hundred Thousand Subscriber Silver Creator Award but they did come through in the end :)
The Replica Airguns YouTube Channel is now at around 200,000 subscribers and growing, not sure when the next YouTube Milestone award happens? Perhaps at One Million Subscribers? That may take a while...
It has taken a lot of hard work and this all goes back to around 12 years ago when I uploaded my first Youtube Video "Worlds Smallest Full Auto BB Gun" and discovered that people are really interested in airguns. Skip ahead to today and the Replica Airguns YouTube Channel has uploaded almost 800 videos with close to 100,000,00 video views! Of course without my subscribers and viewers I would be making videos for nothing so a big thank you to everyone that has supported the Replica Airguns Channel on this journey!
This year at SHOT Show 2018 I had the please to interview Bob from ASG yet again, Bob always has a ton of info to share about ASG new products so make sure to watch this video as it has a lot of info!
To summarize what Bob shared, ASG has their line of CZ P-09 and SP-01 Shadow Steel BB and Airsoft Full Blowback pistols with full size drop out metal magazines. And you'll be happy to know the Canadian CZ P-09 Airsoft version not only will have a threaded barrel but it will come with both a black and red barrel tip cover.
Another new air pistol from ASG is the Dan Wesson licensed none blowback pellet firing 1911, similar to what Crosman is offering that utilizes a full size drop out metal magazine combined with a two sided 6 shot rotary magazine that flips 180 degrees for a total of 12 shots per .177 caliber pellet load. the ASG Dan Wesson Pellet shooting 1911 has a nice heavy weight to it's metal slide and frame design.
Lastly Bob shared with us a new ASG ICS Hera Arms CQR Airsoft Rifle, this ASG Airsoft Rifle is still in the design and production state but look forward to it later on this year!
This year at SHOT Show 2018 I had the please of again interviewing Dani Navickas from Sig Sauer. Dani Showed me several new pistols and a new break barrel rifle Sig Sauer is offering this year. The Sig ASP20 Break Barrel rifle will come in both .177 and .22 caliber pellet shooting versions. The ASP20 has a lighter than most cocking effort of only 33 pounds using their proprietary GlideLite system, along with an adjustable ASP MatchLite trigger.
Another Target pellet airgun from Sig Sauer this year is the .177 caliber pellet shooting Super Target, styled after the Sig Sauer P210 firearm. The Sig Super Target is a single pump pneumatic single shot pistol designed for 10 meeter shooting with adjustable sights and a crips short light trigger.
Sig like several other companies has rebranded their own version of the KWC 1911 CO2 Blowback BB pistols. The Sig Sauer licensed BB 1911 is based on Sigs We the People line to celebrate the American people and their Constitution.
Another new Blowback Pellet firing Sig Sauer Air Pistol was also introduced at SHOT Show, the Sig Sauer X-Five. The X-Five uses their 20 round belt fed magazine and also has Sig's Cam Lever CO2 loading mechanism. You will also find a rear adjustable sight on the Sig Sauer X-Five Pellet Pistol.
Last but not least and perhaps one of the most interesting new products coming out later this year from Sig Sauer is the P320MHS APS which is another new rotary magazine Blowback Pellet Pistol. What's a bit different with the new Sig P320MHS is that it has a full size drop out magazine that holds the CO2 and belt fed pellet magazine. The P320MHS can also be fully field striped, has an open ejection port and is styled after Sig's real Steal M17 firearm.
Umarex presented at SHOT Show this year a license I think we all thought was never going to happen! That would be Glock, for years Glock has been steadfast about not allowing their handguns to be licensed by anyone other than them. Glock has been very protective about their brand and intellectual properties as they are entitled to. I'm not sure what Umarex said to Glock but somehow they where able to get Glock to agree to letting Umarex license Glock pistols to be made into BB and Airsoft versions. The first BB and Airsoft models I was able to checkout at this years SHOT Show are pretty basic in design and are styled after the Glock 19.
The new Umarex Glock 19 licensed BB and Airsoft pistols are CO2 powered as expected but don't have blowback operation and have a fixed metal slide and a drop out stick magazine. The new Glock Licensed Umarex pistols do however look and feel really good, picking them up you would think you are holding a real steel Glock until you try and rack the slide or drop the magazine. Umarex did indicate there will be more licensed models coming out down the road with full blowback operation and full size drop out metal magazines, we just need to be patient as Glock is very particular about the quality control.
Another show stopper for me at the Umarex Booth was the Legends Cowboy Lever Action Shell loading BB Rifle. I love shooting my Red Ryder BB Rifle but I have to admit the Red Ryder kind of looks a bit like a kids beginner airgun. The new Umarex Legends Cowboy Lever Action Shell loading BB Rifle look, feels and operates like the real deal so it's not only going to be super fun to shoot but an awesome replica to own especially if your into the old west guns.
The Umarex Legends Cowboy Lever Action Shell loading BB Rifle uses two 12 gram CO2 cartridges and can hold 10 BB loaded shells in its tube styled magazine, working the lever action elects the empty shells. Umarex claims around 410 fps so the Umarex Legends Cowboy Lever Action Shell loading BB Rifle will be Canada legal without the need for a PAL. I thought the stock was real wood but was correct, it's actually made out of plastic, but I think just about anyone looking close up would have a hard time believing Umarex didn't use real wood.
Thanks to Mark Davis from Umarex for making himself available to interview!
I wanted to start my SHOT Show 2018 Interviews with Crosman because in my books they had one of the most exciting new products this year at SHOT Show, the Crosman Remington DPMS SBR which is a duel 12 gram CO2 powered 4.5mm steel BB firing AR styled semi and full auto Machine gun.
What I like about the Crosman Remington DPMS SBR is that it works a lot like an Airsoft Gas Blowback rifle with an internal bolt and buffer tube spring, working charging handle and dust cover, it even has a bolt release button. The Crosman Remington DPMS SBR can even be taken apart similarly to a real AR rifle.
The next new interesting product from Crosman, and as I found out the design is not entirely exclusive to Crosman, was the CO2 Non-Blowback Pellet firing 1911. The Crosman Pellet 1911 has an interesting magazine design, it looks like a traditional full size drop out magazine, which as you would expect holds the CO2 but rather than an inline BB magazine the new Crosman Pellet firing 1911 has two built in 6 shot rotary magazines that can be flipped so you essentially end up with a 12 shot magazine.
You will have to drop the full size magazine after the first 6 shots to flip the rotary magazines. The Crosman Pellet 1911 does not have blowback action but the double action only trigger is smooth and not too heavy. The slide is metal with a metal magazine and a polymer frame. The Crosman Pellet shooting 1911 comes in silver and black.
The next new product from Crosman was the Mako. The Crosman Mako is a Beretta styled CO2 Blowback BB pistol. The Crosman Mako features Blowback action, fiber optic sights, tactical grips, a double action trigger and a stick magazine that holds the 4.5mm steel BB's.
Thanks to Phillip Guadalupe from Crosman for allowing me the Interview!
So it begins, I have been to this years SHOT Show in Las Vegas and checked out the new products from Umarex, Crosman, Sig Sauer and ASG. I have taken video and Interviewed the main Airgun companies. Now it's time to report back to everyone what I saw and learned. To start with here is a Teaser Video with some scenes from Vegas, inside SHOT Show and of course some of the highlight products from each airgun company.
Type: Blowback Pellet & BB Pistol. Manufacturer: Distributed by Umarex. Model:SA10. Materials: Metal & Polymer. Weight: 2.05 pounds (930 grams). Barrel: Metal rifled. Propulsion: CO2 x 1. Action: Semi auto blowback, single & double action. Ammunition Type: .177 caliber pellets & 4.5mm BB's. Ammunition Capacity: 8x4 round rotary full size drop out metal magazine. FPS: Claimed 420.
Trigger Pull: The trigger pull on the Umarex SA10 CO2 Blowback Pellet and BB Pistol is similar to most of the rotary magazine styled pellet pistols. The blowback operation does cock the hammer allowing for a lighter single action styled trigger pull but the trigger pull length is still about the same as shooting in double action. There is less trigger pull weight when the hammer is back shooting in single action but the first part of the trigger pull is necessary in order to rotate the magazine.
Build Quality: The Umarex SA10 CO2 Blowback Pellet and BB Pistol feel great in the hand and has a nice weight and solid feel to it. Like most modern day pistols the Umarex SA10 CO2 Blowback Pellet and BB Pistol has a metal slide and polymer frame, you will also find a lot of internal metal parts along with a full size drop out metal magazine. Fit and finish are also very good.
Realism: The Umarex SA10 CO2 Blowback Pellet and BB Pistol is not a copy or replica of any actual real steel gun in production but to me it most resembles a Sig Sauer, not exactly as the Umarex SA10 CO2 Blowback Pellet and BB Pistol does incorporate its own design and style. You will find a lot of real gun attributes that make this gun look and feel the deal. Like it's blowback operation, full see drop out metal magazine, wide open recessed barrel and ability to be field stripped. Available From: The Replica Airguns Store.
Pros:
Great weight and feel to it, build quality seems good.
Accessory rail for adding a laser or tactical light.
Unique full size drop out metal magazine that holds extra rotary magazines on it for quick reloading.
Have the option of shooting Steel BB’s or pellets.
Has a rifled barrel.
Gold barrel looks good.
Barrel tip is removable allowing for possible mock suppressor or silencer.
Slide catch is actually a safety making it nice and discreet.
Can easily field strip the gun.
Warning instruction are not overpowering.
Cons:
No white or yellow dot sight on the front and they are non-adjustable.
Trigger safety is just for show.
Not really a replica but a great looking gun none the less.
Comments:
I have been waiting a while to get my hands on the Umarex SA10 CO2 Blowback Pellet and BB Pistol and now that I have it for review I can say it seems to be a really well put together CO2 Blowback Airgun. OF course I still need to get some shooting in with it till I make my final decision but so far I am liking what I am seeing. Generally prefer actual Replica Airguns but the Umarex SA10 CO2 Blowback Pellet and BB Pistol does have a really nice look and feel to it, I don't even mind the Gold barrel and I am usually not a big Gold Gun fan. The unique magazine design with its snap in rotary Pellet and BB magazines shoudl come in handy when it coms time for testing and the ability to shoot either Pellets or BB's does give the shooter more options.
Type:BB Pellet Pistol Manufacturer:Umarex Model:SA10 Material: Polymer frame with metal slide. Weight: 929.8 g (2.05 pounds). Power Source: 12 g CO2 x 1. Action: Single & Double action Ammo Type: 4.5mm steel BBs and /177 caliber Pellets. Ammo Capacity: 8 rounds. FPS: 420
I have been having a hard time getting my hands on the Umarex SA10 CO2 Blowback Pellet and BB Pistol to do a review for everyone. It's been a rather low stock item. We have had it in a couple of times but not in a lot of quantity and since the demand has been higher than the supply the Umarex SA10 CO2 Blowback Pellet and BB Pistol tends to be out of stock most of the time! Hopefully that changes in the future?
This YouTube video is a Preview video only for the Umarex SA10 CO2 Blowback Pellet and BB Pistol so I do not go over a lot, I sim,ply show you around the gun and take a look at the packaging and any info on the packaging. My Future Table Top Video Review will have a lot more details along with a full field strip of the Umarex SA10 CO2 Blowback Pellet and BB Pistol.
Here's what we know for now! The Umarex SA10 has a metal frame and polymer slide, it shoots both .177 caliber pellets and 4.5mm Steel BB's. The Umarex SA10 CO2 Blowback Pellet and BB Pistol has blowback action with a single and double action trigger and sports a full size drop out metal magazine that holds the CO2 and removable rotary 8 round magazines, 4 in total 1 ready for shooting and the other 3 on standby ready to be hot swapped. We should expect around 400 fps with lighter ammo and I am hoping for decent accuracy using pellets since the Umarex SA10 CO2 Blowback Pellet and BB Pistol does have a rifled steel barrel.
Type: Blowback Airsoft Pistol. Manufacturer: Distributed by Cybergun. Model:Taurus PT24/7 G2. Materials: Metal & Polymer. Weight: 1.86 pounds (844 grams). Barrel: Metal non-rifled. Propulsion: CO2 x 1. Action: Semi auto blowback, single action only. Ammunition Type: 6mm plastic Airsoft BB's. Ammunition Capacity: 19 round double stack full size metal magazine. FPS: Claimed 438 using .20 gram BB's.
Trigger Pull: The trigger pull on the Cybergun Taurus PT24/7 G2 Airsoft Pistol is Single Action Only and feels really good, it was much lighter than I expected and has a medium length take up, the reset positions the trigger fairly far back ready for quick follow-up shots. You'll also find a working trigger safety on this Airsoft Pistol which is a nice touch and ads to the realism.
Accuracy: At this point I have not shot the Cybergun Taurus PT24/7 G2 Airsoft Pistol, I imagine it should perform well considering it has an adjustable spin-up or hop-up along with a rear site that can be adjusted for windage. According to the manufacturers claimed fps, we should get around 438 fps using .20 gram Plastic Airsoft BB's. I will be a bit surprise if this Cybergun Taurus PT24/7 G2 Airsoft Pistol actually hits this rather high velocity but anything over 400 will be impressive.
Build Quality: Overall the Cybergun Taurus PT24/7 G2 Airsoft Pistol looks and feels really good. It has a nice weight to it but is not overly heavy. Everything feels tight and the finish looks great. the only thing I noticed that stood out a little bit was some flex in the forward part of the frame near the accessory rail. It seems to seperate just a little bit leaving a very slight gap and there is some flex here. I would not worry too much about this as it is not a structural consideration.
Realism: The Cybergun Taurus PT24/7 G2 Airsoft Pistol is a real ringer for the lead bullet firing version in almost every way and even has licensed trademarks on it through Cybergun but they are not exactly where you would find them on the real steel version, at least on the slide portion. Everything works like you would expect including full ambidextrous slide catch, safety, and magazine release. You can also easily field strip the Cybergun Taurus PT24/7 G2 Airsoft Pistol just like the real steel version. Available From: The Replica Airguns Store.
Pros:
Claimed to have a very high fps over 400 using .20 gram Airsoft BB’s.
Full length blowback action.
Supper accurate licensed Taurus PT24/7 G2 replica.
Excellent SAO trigger pull, very smooth and light.
Working trigger safety.
Double stack full size drop out metal magazine holds the CO2 and 19 BB’s.
Comes with additional back-straps in small medium and large sizes.
Adjustable rear sight for windage.
Fully ambidextrous controls.
Easily field strippable.
Red tip is easy to remove using boiling water to melt the glue.
Adjustable Bax hop-up.
Cons:
Comes with red tip installed and glued on.
Seems to have a little bit of frame flex in the rail area with a slight gap.
Safety selector is plastic.
Comments:
The most noticeable feature of the Cybergun Taurus PT24/7 G2 Airsoft Pistol is the claimed high FPS of 438 using .20 gram airsoft BB's. This seems kind of high for a full blowback Airsoft pistol but we will find out when I do my Filed Test Shooting Video Review for the Cybergun Taurus PT24/7 G2 Airsoft Pistol. Velocity aside the Cybergun Taurus PT24/7 G2 Airsoft Pistol is a very stylish gun, I have always been a Sig Sauer fan and it remind me a lot of the Sig brand but with a some more rounded finishing going on. The Cybergun Taurus PT24/7 G2 Airsoft Pistol has a lot going for it: Taurus Licensing, metal and polymer parts where you would expect them, fully ambidextrous working controls, adjustable rear sight for windage, adjustable hop-up, a working trigger safety, some power behind it and a full size double stack all metal magazine. It's also rather reasonably priced in our Replica Airguns Canada and US Online Store.
It was fun to shoot the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol for a change but really it was a lot like shooting one of my BB and Airsoft pistols, except in this case I was shooting .43 caliber rubber balls. I decided to not use paintballs inside my nice new Sea Can Indoor Airguns Shooting Range to keep things clean :)
First, I put three rounds through my Chrony Chronograph to see what the real world FPS would be, keep in mind I was using rubber balls rather than paintballs and the rubber balls are a little bit heavier than paintballs so this could bring the FPS down a bit compared to the lighter paintballs. Using a brand new CO2, the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol average 316 FPS which was high than the claimed 290 FPS!
Moving on to my accuracy testing, as per usual I positioned myself 30 feet back from my paper target and using a seated and rested shooting position I shot a full magazine (8 rounds) of rubber balls on target with the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol. I was not expecting anything close to what I would get with a BB or Airsoft pistol since Paintball guns are not known for super tight groups. I did manage to shoot around a 6 inch group with most of the shots staying within around 3 inches. This is about what I was expecting as paintball guns are not meant for "target practicing", generally you are going to be shooting human sized objects and hoping to get some well placed center mass shots. 3-6 inch accuracy at 30 feet will get the job done for sure. I did find the trigger using rubber balls did have a bit more friction while the inner barrel seated itself into the magazine. When shooting quickly it is much less noticeable.
I know some of you are going to ask about using the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol with rubber balls for non-lethal self defense and the reality is it will not stop a person who is persistent on hurting you. There is simply not enough stoping power here. Will it "sting like a bitch" if you get shot up close with one of these Umarex Walther PPQ M2 .43 Cal. Paintball Pistol? For sure but a well timed punch has more chance of dropping someone than a .43 caliber rubber ball moving at around 300 FPS. You may scare someone off simply by brandishing it but you take the chance of the person calling your bluff. Perhaps 8 rubber balls to the face will change their mind but that's a chance you have to figure out if you want to take or not.
As a paintball pistol, the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol is about the best I have seen in terms of replica paintball guns. It is as good as they come for realism, even better than many BB and Airsoft guns and in terms of performance it did not let me down either.
Wow, we had a great contest giveaway for the Umarex Ace in the Hole Single Action Army Revolver. We received 406 participants with close to 2000 separate entries, so thank you everyone that got involved. Unfortunately for the other 405 participants there can only be one winner and to see who that winner is you're going to have to watch my Contest Giveaway announcement video...
Type: Paintball Gun. Manufacturer:Umarex - T4E. Model:Walther PPQ M2. Materials: Metal & Polymer. Weight: 848 grams (1.87 pounds). Barrel: Smooth bore. Power Source: 1x12 gram CO2. Action: Semi-Automatic with blowback action. Ammo Type: .43 Caliber Paintball or Rubber Ball. Ammo Capacity: 9 Rounds. FPS: 290.
Trigger Pull: The trigger pull on Umarex Walther PPQ M2 .43 Cal. Paintball Pistol feels a lot like a double action trigger, internally it may be striker fired so expect a bit of a longer trigger pull with a fairly long reset and a medium strength trigger weight. There is also a working trigger safety which works well.
Build Quality: The build quality of the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol is really very good, metal parts are where you would expect them, the slide, slide catch, barrel, magazine and most internal parts giving the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol a nice near 2 pounds (1.87 pounds) of weight with the magazine in which makes the Paintball version a little heavier than the real still version (1.53 pounds) but once the real steal version is loaded with a full mag this may even out a bit. The Walther PPQ M2 does have a polymer frame but again this is normal with todays modern guns and helps keep the weigth down. Fit and finish is also excellent.
Realism: The Umarex Walther PPQ M2 .43 Cal. Paintball Pistol is a near perfect replica of the real steel Walther PPQ M2, form the fully licensed markings to the large .43 caliber diameter barrel. If you placed the Paintball version side by side with the real steel version I doubt you could tell them apart? You will find that the slide cycle distance is a bit shorter than it shoudl be meaning that when the side catch is engaged the slide does not go as far back as it should. Filed stopping the Walther PPQ M2 .43 Cal. Paintball Pistol may requires some tools.
Full Metal slide that locks back on the last shot.
All metal heavy full size drop out magazine adds some additional weigth to the gun.
Very Accurate Walther PPQ replica, almost indistinguishable from the real still version.
Everything works pretty much like the real gun so a great training tool.
Adjustable yellow dot sights.
Working trigger safety.
Fit and finish is excellent.
Magazine spring release really shoots the magazine out.
Love the .43 caliber barrel opening, adds to realism.
Cons:
Trigger pull seems a bit long as it shoots like a double action trigger, may be striker fired internally?
Magazine only holds 9 rounds, so you are going to need extras.
Blowback action is not full blowback, more like a typical BB airgun.
Comments:
I'm really glad to see another Replica Paintball Pistol available in Canada, especially such a well made and realistic version. The Umarex Walther PPQ M2 .43 Cal. Paintball Pistol looks to be perhaps the best to date .43 caliber Paintball gun on the market and may even prove to be an option for non-lethal personal defense when using rubber balls with it. Not that I would trust my life with it but it sure looks the part and I am sure most people would not want to be on the receiving end of 9 rounds coming at you. As a training tool and Paintball gun the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol offers superb realism for this purpose. I am looking forward to testing mine out shortly :)
First I wanted to wish everyone a Merry Christmas and Happy New Year, hopefully you get all the toys you have been wanting! Maybe we can help you out a little with that over on our Online Canada and US Replica Airgun Stores.
I also have a new Red Ryder Type BB Rifle to show off, this one is John Wayne licensed and called the John Wayne Lil Duke. At first glace it looks a lot like a Red Ryder but it has the large loop styled lever which is designed for easier use when wearing gloves, perfect for our Canadian weather ;) The John Wayne Lil Duke Lever Action BB Rifle has a really nice fit and finish, perhaps even a bit better than the classic Red Ryder BB Gun. I really like the real wood stock finish.
Another nice touch is that the John Wayne Lil Duke Lever Action BB Rifle comes with a lasso scope rail that you can attach just behind the rear iron sight to accommodate dove tail scope mounts. Just make sure to really tighten down the rear screw as it comes loose super easy due to the spring vibration. I would even recommend adding a bit of lock tight to the screw to be sure.
Here are some of the main specifications for the John Wayne Lil Duke Lever Action BB Rifle: 4.5mm Steel BB's, leaver action spring piston, 350 fps, 550 round magazine, 2.5 pounds, smooth bore 9.5 inch barrel, adjustable rear sight for elevation, included scope mount for 11mm dovetail rings, metal and wood build.
Before I get into this Field Test Shooting Review for the Umarex Legends Ace in the Hole SAA Pellet Revolver I did want to mention again that we do have a Contest Giveaway going on till the end of this month where we will be giving away an Umarex Legends Ace in the Hole SAA Pellet Revolver to a Canada or US Winner. Sorry we can not ship outside of Canada or the US due to airgun and import regulations. Make sure to scroll to the bottom of this review to enter the contest.
Back to the Field Test Shooting Review! Rather than just testing the 3.5 inch barreled Umarex Legends Ace in the Hole SAA Pellet Revolver by itself, I also compare it to two other Umarex SAA Revolvers, in 5.5 and 7.5 inches version. I wanted to see how the barrel length effected power and accuracy and I was kind of surprised at the results.
I shot three rounds from each Umarex SAA Pellet Revolver through my Chrony Chronograph and averaged them out for each gun. Umarex claims the Umarex Legends Ace in the Hole SAA Pellet Revolver to get around 340 fps and it shot an average of 323fps with a brand new CO2 and using 8.2 gram lead pellets, not bad at all considering the pellet weight and colder temperature of around 15 degrees Celsius. next I shot the 5.5 inch Umarex SAA Pellet Revolver in the same manner and averaged 347fps which is kind of what I was expecting die to the anger barrel. SO when I came to the 7.5 inch Umarex SAA Pellet Revolver I was expecting even higher results but was surprised by my results which where exactly the same as the 3.5 inch version coming in at 323fps? Perhaps the valve was a bit detuned on the 7.5 inches version, I am not sure?
Moving on to the accuracy performance for the Umarex Legends Ace in the Hole SAA Pellet Revolver. Again I sued the same 8.2 grain RWS flathead pellets and emptied a full cylinder into my paper target positioned 30 feet downrange. My accuracy result for the Umarex Legends Ace in the Hole SAA Pellet Revolver where decent with my 6 shoot group getting around a 2 inches and well centered on the target, just a lad high but not by much. I am pretty sure I pulled one of the shots so I think I should of gotten closer to 1.5 inches. Next I Shot the 5.5 inch UmarexSAA Pellet Revolver but seemed to struggle a bit with it. I found the 5.5 inch Umarex SAA Pellet Revolver shot to the left and my 6 shot grouping was a lot more spread out exceeding 2 inches by a bit. Lastly I tested out the 7.5 inch Umarex SAA Pellet Revolver and it was the clear winner placing all 6 rounds wishing the black bullseye getting close to a 1 inch grouping. I love it when that happens :)
