I made a similar video about how to hold your airgun a while back but sometimes they get a bit buried in all the video I make. I feel it's really important how you grip your gun even if it's only an airgun with very little kick or recoil. Proper pistol grip is something you should use no matter what so that you can carry it forward to what ever gun you are shooting.
More kick or recoil means a firmer grip is required to hold the gun so when shooting a powder burner with lots of kick grip becomes even more important.
In this video I go over the proper two handed grip to use when holding a pistol, which hand to hold lose and which had to grip tight, how to overlap your fingers and thumbs.
Type: BB air pistol. Manufacturer: Umarex USA. Model: Combat Zone Enforcer Materials: Pastic outer shell. Weight: .9 pounds (400 grams) Barrel: Metal non-rifled (4.25 inches). Propulsion: CO2 x 1. Action: Semi auto non-blowback, double action only. Ammunition Type: 6mm Plastic Airsoft BB's. Ammunition Capacity: 15 round metal stick magazine. FPS: 400.
Trigger Pull: The trigger pull on the Umarex Combat Zone Enforcer CO2 Airsoft Pistol is medium to heavy but since it's a double action only trigger, this is to be expected. There is a fair amount of take up with the entire pull being about 8-9 pounds and the release point happening right at the very back of the pull, you get a bit of a clicking sound warning right before it releases. If you are used to shooting other lower priced double action triggered Airguns where the barrel protrudes out of the front of the gun when you pull the trigger, then you will know what to expect with the Umarex Combat Zone Enforcer CO2 Airsoft Pistol.
Accuracy: This part of the review is yet to be determined as I have not done my Field Test or Shooting test. I have tested out the Umarex XBG in the 4.5mm Steel BB version and it shot really close to 400 fps and produced about 2 inch groupings on a target setup 30 feet away using 10 shots.
Build Quality: The Umarex Combat Zone Enforcer CO2 Airsoft Pistol has pretty much all the mechanical parts moulded into the shell of the airgun with the exception of the Trigger, safety and magazine release. Again, most of the build materials are plastic with the exception of some internal parts, the magazines, the barrels and the triggers. This simplistic design does work well and since there are less moving parts there is less that can go wrong.
Available From: The Canada and US Replica Airgun Stores.
Pros:
Very low cost, around $50 bucks.
Should have a nice combination of Shots per CO2 and FPS because of efficient design.
Universal metal Stick magazine works in in a bunch of guns, can mix a and match.
CO2 tabs are fairly well hidden.
Rails for adding accessories.
Constructions screws are less obvious (Smaller).
Tried and true design that works and is reliable.
Swing up CO2 door will not get lost.
Cons:
Mostly all plastic.
Not a lot of actual working parts except for the trigger and magazine release. All else is molded in to the plastic.
Double action triggers are a bit longed and heavy.
No adjustable sights or hop up adjustments so hopefully it shoots straight?
Comments:
Personally I prefer spending a few more bucks to get air pistols that have more metal and more working parts, but not everyone has 100+ dollars to spend on an Airsoft Gun or do they need it to be super ultra realistic. Some people just want a gun that is easy on the wallet but still offers decent performance and reliability, and to be honest, a simpler design with less moving parts to wear out or malfunction is probably going to give you better reliability at the end of the day. It just depends what you are looking for. Even if you have a few ultra realistic high end airguns, why not pick something like the Umarex Combat Zone Enforcer CO2 Airsoft Pistol to plink around with and save some of the wear and tear on your more expensive Airguns?
My Vimeo Video Review for the Umarex Combat Zone Enforcer CO2 Airsoft Pistol:
Trigger Pull: The trigger pull on the Gletcher TT-A CO2 Airsoft Tokarev is single action only, the blowback action cocks the hammer after each shot but you will need to either draw the hammer back or rack the slide on the first shot. I did find the the SAO trigger to be rather heavy for a single action type trigger? Perhaps it will loosen up a bit over time? The take-up is kind of long since there is no real reset that takes place after the hammer is drawn back. The release point is sudden but does take some effort to release the trigger.
Accuracy: So far I have only Field Tested the 4.5mm Steel BB version and of dun it shot in the upper 300 fps range with a pretty decent accuracy shooting a 10 shot group form 30 feet back all within 1.5 inches. Hopefully the Airsoft version can produce similar results...
Build Quality: The Gletcher TT-A CO2 Airsoft Tokarev is really nicely made overall, pretty much the entire pistol is metal except for the grips which are plastic of course. The finish looks really nice and the fit is good, not a lot of slide wiggle and all the mechanical parts function smoothly with the exception of the rather strange two piece trigger design. You really need to watch my video to see what I mean here!
Realism: I am lucky enough to own a Tokarev type semi auto real steel pistol and looking at the two of them side by side they look very much the same. Of course my Norinco Tokarev (Type 54) Model 213 is made out of hardened weapons grade steel and so it is heavier but the Gletcher TT-A CO2 Airsoft Tokarev does feel solid in the hand with it's all metal design. The working slide catch, magazine release and hammer are all in the right places and function as they should. Gletcher even made sure to have a recessed barrel and hidden CO2 screw which adds to the realism. The only real giveaways are again that rather strange looking single action trigger and the two pins near the lower front of the slide. Not a deal breaker!. I do have to mention the way the safety was implemented on this Gletcher TT-A CO2 Airsoft Tokarev, Gletcher placed it just inside the Slide Stop Retainer Clip in a kind of unobtrusive location.
Pros:
One of the only 6mm Airsoft BB shooting Tokarev replicas I have come across so far
Very solid and weighty gun for it’s size. Mostly all metal.
CO2 is well hidden.
13 round all metal stick magazine once installed looks full size.
Blowback operation, slide locks back on last round.
Did a good job of making the safety discreet.
The Tokarev reminds me of a smaller more compact 1911 which is another gun I like.
Cons:
SAO trigger is rather heavy.
Trigger looks a bit funky compared to a real Tokarev trigger.
Would have liked to have seen a full size drop out metal magazine on this gun.
Comments:
So far I have liked all the Gletcher guns that I have come across, it's great that Gletcher offers a lot of unique guns from the past, for me the Tokarev is near and dear to my heart since it is very 1911 like and I truly love the 1911 design. It only makes sense that I would own not only a real steel 1911 but also the Russian Tokarev. I'm not really sure how the Gletcher TT-A CO2 Airsoft Tokarev is going to perform using the chronograph and during my paper target testing from 30 feet out but I am popgun ti will shoot a bit harder than the claimed 263fps and if it can get similar accuracy as the 4.5mm steel BB version that will be great!
My Vimeo Table Top Video of the Gletcher TT-A Tokarev CO2 Airsoft Pistol:
It seems like I am forever reviewing some version of the KWC CO2 Blowback 1911 either in Airsoft or Steel BB or distributed by Cybergun or Gletcher or Umarex or pretty much every company out there has their own rebrand of it. At the end of the day they are all made in the KWC factory and are all interchangeable, you can even swap out the Airsoft parts with the steel BB part if you want to...
So how did we do in our See Can indoor Airgun Shooting test? As expected the Cybergun Colt 1911 Rail Gun Series CO2 Blowback Airsoft Pistol performed well. I placed 5 shots through my Chrony Chronograph using a brand new CO2 with .20 gram Airsoft BB's and averaged 373 fps which is about perfect for a full blowback CO2 Airsoft Pistol. If you're wondering the temperature was moderate at 16 Celsius or 61 Fahrenheit.
Next I placed 10 rounds downrange into my paper target 30 feet away using a rested position) Sand bag up front and sitting in the rear). My Cybergun Colt 1911 Rail Gun Series CO2 Blowback Airsoft Pistol was shooting a bit on the high side but the adjustable Bax Hop-up should allow for us to bring it down accordingly, that said my 10 shot grouping was just under 2 inches at 30 feet.
Even though I find myself reviewing or testing the various versions of the KWC 1911's. I don't really have a problem with it. They have been one of the most popular Blowback Airguns if not thee most popular and for a reason. They look and feel great, are reasonably priced, they perform well and have gotten more and more reliable over the years. All you ahed to do is pick which one of the Cybergun Colt 1911 Rail Gun Series CO2 Blowback Airsoft Pistols you want?
First off let's get the fact that the Cybergun Sig Sauer SP2022 Sportline CO2 Airsoft Pistol is not going to win any awards for true to scale weight and materials used in its production. This Airsoft pistol is virtually all plastic with the exception of some internal metal parts. It weighs next to nothing but that could actually be a good thing if you don't want a heavy sidearm dragging you down on the field. Once you are all geared up with your primary weapon and all it's extra magazines and what not. And of course you are probably covered head to toe in some sort of tactical uniform, why drag yourself down even more with a heavy sidearm and all it's heavy backup magazines? Just a thought!
What's really important is how does the Cybergun Sig Sauer SP2022 Sportline CO2 Airsoft Pistol actually perform? Well really good for an inexpensive pistol and since there is no blowback operation you are going to get a lot more shots per CO2 and higher fps.
In terms of power, being non-blowback did seem to help out the Cybergun Sig Sauer SP2022 Sportline CO2 Airsoft Pistol. I got an average of 390 fps shooting 6 shots through my Chrony Chronograph. I was using .20 gram plastic Airsoft BB's with a brand new CO2 cartridge. The temperature was around 16-17 degrees Celsius which is around 62 degree Fahrenheit.
Next up I placed 10 rounds into my paper target setup 30 feet down range. From my seated and rested position I was able to get about a 2 inch grouping and all the shots where fairly well centered, just a tad to the left. This is good considering most lower priced Airsoft pistols are not going to have adjustable sights which is the same with the Cybergun Sig Sauer SP2022 Sportline CO2 Airsoft Pistol.
I got the chance to Field Test another 4.5mm Steel BB Air Rifle. Most of the time I'm testing out pistols so the opportunity to shoot some rounds through a rifle is a nice change. Todays Air Rifle test subject was the ASG TAC-4.5 CO2 BB Air Rifle and by the way it also comes in a 6mm Airsoft version called the ASG TAC-6 CO2 Airsoft Rifle. Maybe down the road I will see how the 6mm Airsoft version compares to the 4.5mm Steel BB version...
Right out of the get go the ASG TAC-4.5 CO2 BB Air Rifle surprised me with some rather high velocity shots going through my Chrony Chronograph. The highest FPS shot getting up to 538 fps and the slower shot which was the 5th shot slowing down a bit to 485 fps. My 5 shot average was still up and over 500 fps at 514 fps.
If you're worried about the ASG TAC-4.5 CO2 BB Air Rifle being legal as an unregulated firearm in Canada, there is no need to be concerned since the 500 fps limitation also requires a foot pound energy of over 4.2 foot pounds for the airgun to require a firearms license (both thresholds must be met). A 4.5mm steel BB weighs in at around 5.1 grain and even with the fastest shot of 538 fps, the foot pound energy would only be 3.28 foot pounds so nope, no PAL required.
OK so the ASG TAC-4.5 CO2 BB Air Rifle has some decent power, what about accuracy? Again the ASG TAC-4.5 CO2 BB Air Rifle came through with flying colors! I was able to get about a 1 inch 10 shot grouping even though I was struggling to use the peep sight. My old eyes really find it hard to focus using a peep sight. I would suggest a red dot or even a low powered optical scope since the ASG TAC-4.5 CO2 BB Air Rifle has a rail for this purpose. I did find that the ASG TAC-4.5 CO2 BB Air Rifle shot a little bit low and slightly to the right. This can easily be corrected by adjusting the rear iron sight since it has windage and elevation settings.
The ASG TAC-4.5 CO2 BB Air Rifle would really be a great plinker even shooting objects at ranges up to 50 feet you should still be able to nail a pop can with no problems. The double action trigger is a bit long and not the lightest I have used but you can still get shots off fairly quickly. Make sure to also checkout my Table Top Video for more details and specifications along with somer nice closeup video.
I have kind of already reviews this Cybergun Sig Sauer X-Five Blowback Airsoft pistol before but in the all black version with the non-adjustable sights. I'm kind of glad I did a revisit of this Stainless steel wood grip version since I actually got fairly different results even though both Airsoft Pistols are mechanically the same.
Yes accuracy went down a bit but with the Stainless Cybergun Sig Sauer X-five CO2 Blowback Airsoft Pistol but I still grouped my 10 shots within about 2 inches using my standard 30 foot back, rested shooting position. There will always be some human factor when shooting this way since the pistol is not locked into place and even though I am using a reseted seated position there is some movement going on.
Overall my retest showed that the Stainless Cybergun Sig Sauer X-five CO2 Blowback Airsoft Pistol is well worth taking a look at. Personally I really like this Stainless wood grip version not only for its looks but for the simple fact it has a fully adjustable target sight on the back. Add heavy blowback operation and a very smooth single and double action trigger and this all makes for a great Airsoft Pistol.
Another Airsoft Preview Video featuring tow KWC Airsoft Pistols, the KWC CQBP M45 A1 1911 Airsoft Pistol and the KWC MP40 Airsoft Pistol. Both Airsoft guns have metal slides and polymer frames and also feature full size metal drop out magazine that hold both the CO2 and plastic Airsoft BB's. The KWC CQBP M45 A1 1911 Airsoft Pistol has a fixed slide that is non-blowback with a double action only trigger while the KWC MP40 Airsoft Pistol has full blowback operation and sports one of the lightest and smoothest single action triggers out there!
Type:Airsoft Pistol Manufacturer:KWC Model: MP40 Materials: Metal and Polymer Weight: 717 g (25 oz) Barrel: Smoothbore Power Source: CO2 Action: Semi-Automatic Ammo Type: Airsoft BBs 6mm Ammo Capacity: 15 Rounds FPS: 370
I'm back from my family Vacation in sunny Oceanside California and ready to start making more review videos for everyone! To kick things off I show you 6 Cybergun Airsoft pistols. All of these bad boys are actually made by KWC, Cybergun licenses the Colt, Taurus and Sig Sauer names and redistributes them out of the US hence the orange tips on most of the barrels.
All five Cybergun pistols are full metal with blowback operation with the exception of the Sig Sauer SP2022 which is non-blowback and primarily plastic including the frame, slide and even the magazine. All these Cybergun Airsoft Pistols shoot 6mm Plastic Airsoft BB's and use 12 gram CO2 cartridges in their full size drop out magazines.
Type: Airsoft Pistol Manufacturer: Cybergun Model: Taurus PT92 Materials: Full Metal Weight: 1130 g (2.5 lb) Barrel: smoothbore Power Source: CO2 Action: semi-automatic Ammo Type: Airsoft BBs 6mm Ammo Capacity: 27 rounds FPS: 370
Type: Airsoft Pistol Manufacturer: Cybergun Model: Colt 1911 Rail Gun Materials: Full metal Dimensions: 230 mm x 135 mm (9 inches x 5.3 inches) Power Source: CO2 Action: Semi-automatic Ammo Type: 6mm airsoft BBs Ammo Capacity: 17 rounds FPS: 370
Type: Airsoft Pistol Manufacturer: Cybergun Model: Colt 1911 Rail Gun Materials: Full metal Dimensions: 230 mm x 135 mm (9 inches x 5.3 inches) Power Source: CO2 Action: Semi-automatic Ammo Type: 6mm airsoft BBs Ammo Capacity: 17 rounds FPS: 370
Type: Airsoft Pistol Manufacturer: Cybergun Model: Colt 1911 Rail Gun Materials: Full metal Dimensions: 230 mm x 135 mm (9 inches x 5.3 inches) Power Source: CO2 Action: Semi-automatic Ammo Type: 6mm airsoft BBs Ammo Capacity: 17 rounds FPS: 370
Type: Airsoft Pistol Manufacturer: Cybergun Model: Sig Sauer SP2022 Materials: Polymer build Weight: 600 g (.66 lbs) Barrel: 102 mm (4 in), brass, non-rifled Power Source: 12 g CO2 x 1 Action: Semi-automatic, double-action only Ammo Type: 6mm Airsoft BBs Ammo Capacity: 15 rounds FPS: 375
I think this may be a record for me, I mean following up a Table Top Review with a Field Test Shooting video within a day of each other! If you have not already watched my Table Top Review for the ROHM RG-46 22 Caliber Blank Revolver than make sure to do give it a look.
Shooting Field Tests of blank guns are really pretty simple. There is no accuracy or chronograph test to consider since there is no bullet coming out of the barrel, kind of makes it hard in this case. This may even seem a little bit weird since what is there left to actually test? I guess as long as I pull the trigger and it goes "BANG" each time then we have ourselves a winner on our hands :)
I can attest that the ROHM RG-46 22 Caliber Blank Revolver was a clear winner on this day. I loaded 7 rounds into the 7 shot cylinder and then pulled the trigger 9 times. And as you can imagine the first 7 trigger pulls went "BANG" each pull while the last 2 trigger pulls went click-click as expected...
All fun aside the ROHM RG-46 22 Caliber Blank Revolver Field is a really nice quality blank revolver great for many situations like; Gun training, animal training, scaring off pests, stage or movie props or just collecting for fun.
Trigger Pull: The trigger pull on the ROHM RG-46 22 Caliber Blank Revolver in single action is very light having virtually no take up at all. The double action trigger pull is much heavier with a smooth release. Mechanically the trigger feels really good.
Accuracy: NA. Build Quality: The overall build quality for the ROHM RG-46 22 Caliber Blank Revolver is excellent, being German made its built to last and the fit and finish is typical German quality. There are steel parts where they need to be like in the barrel, pins, screws and reenforcing parts, the rest of the gun is generally made out of a zinc metal with only the simulated wood grips being made out of plastic.
Realism: The ROHM RG-46 22 Caliber Blank Revolver is not an exact replica of any given gun in production as this would make importing it into Canada even more difficult, but it is styled after a Smith & Wesson Snub Nosed Revolver. As for looking like and working like a real gun, the ROHM RG-46 22 Caliber Blank Revolver looks and sounds like a real gun, with the exception of the dangerous bullet coming out of the barrel! Purchase from: The Replica Airguns Canada Store.
Pros:
German made Quality.
All metal gun with reenforced steel in some areas.
Front firing and capable of shooting flares.
.22 caliber blanks are less expensive and not as loud to use.
Comes with removable Flare adaptor & Cleaning rod.
Super compact and portable.
Highest capacity ROHM Revolver with 7 round cylinder.
Cons:
Smaller caliber blanks are not as loud or powerful.
Can be considered a bit expensive due to blank guns in general being hard to get and in high demand in Canada.
Comments: The main purpose of the ROHM RG-46 22 Caliber Blank Revolver is to make noise along with the added ability to shoot flares and that's exactly what you're getting here. The ROHM RG-46 22 Caliber Blank Revolver may not be as elegant as the other ROHM revolvers with their nicer barrels but with the ROHM RG-46 22 Caliber Blank Revolver you are getting the most compact 7 round shooter and at a bit lower price than the other full sized ROHM Blank Guns.
Make sure to take advantage of our 10% Off Everything Replica Airguns Easter Sale in both our Canada Online Store and US Online Store. Sale goes from Friday till Monday April 2nd.
Type: Airsoft Rifle. Manufacturer: KJWorks. Model:M700P. Materials: Metal with textured synthetic stock. Weight: 7.8 pounds (3600 grams). Barrel: Smooth bore barrel. Propulsion: Gas operated (Green Gas or propane). Action: Bolt.. Ammunition Type: 6mm plastic Airsoft BB's. Ammunition Capacity: 10-11 round metal magazine. FPS: Up to 550fps.
Trigger Pull: the trigger on the KJWorks M700P Gas Bolt Action Airsoft Rifle is what you would expect from a bolt action style hunting/sniper rifle. The working of the bolt does most of the work for your trigger finger so all that is required is the release of the firing pin from a very short and light tigger.
Build Quality: The KJWorks M700P Gas Bolt Action Airsoft Rifle is well built all around and the fit and finish feel good. all the mechanical parts functioned without any problems and I do like the textured stock and nice rubber butt pad. I did notice a couple of spots on the textured stock where it there where cosmetic imperfections, perhaps this is form the moulding of it?
Realism: The KJWorks M700P Gas Bolt Action Airsoft Rifle is based around the Remington 700 platform which looks like your standard high powered hunting rifle. The Airsoft version looks and functions just like the real deal since we are using Green Gas rather than a spring making the bolt easy and smooth to operate. Available From: The Replica Airguns Store.
Pros:
Bolt is super easy to use compared to a Spring style bolt action Airsoft rifle.
Textured stock feels great.
Lots of sight option with the built in scope rail and removable adjustable iron sights.
Ready for Bipod or sling.
Full size drop out metal magazine that holds the Gas and Airsoft BB’s.
Easy to adjust Hop-up screw.
Cons:
FPS was a little bit lower than expected.
Was not able to get 11 rounds into the magazine.
Some imperfections on the textured stock.
Comments: I have revised a couple of spring bolt action Airsoft rifles in the past and although it's nice that all you need is a bag of Airsoft BB's and your ready to shoot, having the Gas operation makes the bolt so much easier to operate allowing for much quicker follow up shoots. The more time you have to acquire your next target and make the shot can make all the difference when your enemy is closing in. The KJWorks M700P Gas Bolt Action Airsoft Rifle is a nice ready to shoot out of the box Airsoft rifle that if you want to can be customized pretty easy with a bipod or scope which I would recommend since not only will this make the KJWorks M700P Gas Bolt Action Airsoft Rifle look a lot better but also way more practical.
My YouTube Table Top Review Video for the KJWorks M700P Gas Bolt Action Airsoft Rifle:
This John Wayne Lil Duke Giveaway didn't go exactly as planned as we had that YouTube Airgun Channel scare shortly after the original announcement so not as many people knew about it but we said we where going to giveaway two John Wayne Lil Duke BB Rifles and so that's what we are going to do!
Make sure to watch my Youtube video and find out if you won or not and congratulations to the two winners! For those that did not win this time around, you can still get yourself a John Wayne Lil Duke BB Gun by heading over to our Replica Airguns Canada or Replica Airguns US online web store and purchasing one the conventional way!
Type: BB Rifle. Manufacturer: ASG. Model:TAC 4.5. Materials: Plastic with some internal metal parts. Weight: 3.5 pounds (1588 grams). Barrel: 12 inches, metal non-rifled. Propulsion: 12 gram CO2 x 1. Action: Semi auto, double action only. Ammunition Type: 4.5mm BB's. Ammunition Capacity: 21 round metal stick magazine. FPS: 417.
Trigger Pull: The double action only type trigger pull on the ASG TAC 4.5 CO2 Air Rifle is not too heavy but it is rather long so really quick rapped fire shooting will require some finger work. The trigger reset is right at the begging of the pull so you need to make sure you allow the trigger full range of motion or you may miss the odd shot.
Accuracy: I haven't done my Field Test Shooting video just yet for the ASG TAC 4.5 CO2 Air Rifle but hope to do it soon so stay posted for that video. ASG claimed the fps to be right around 417 but I have a feeling it shoudl come in a little bit higher than this since there is no blowback and the barrel is close to 12 inches long, With the fiber optic front sight and fully adjustable rear peep sight I shoudl be able to get some decent rounds on target downrange and hopefully get a nice grouping.
Build Quality: The ASG TAC 4.5 CO2 Air Rifle is mostly plastic but feels pretty good in the hand with decent fit and finish. There are some metal internal part along with the outer barrel but for the most part the ASG TAC 4.5 CO2 Air Rifle is all plastic including the trigger and front and rear sights.
Realism: The ASG TAC 4.5 CO2 Air Rifle is not a replica of any modern rifle that I know of but it does look a bit like a Beretta CX4 Storm especially the back half of it. The flash hider and top and bottom raise add to the realism. Available From: The Replica Airguns Store.
Pros:
Very customizable with rails top and bottom.
Comes with a rather nice Bipod.
Front and back Iron sights are very usable.
Safety switch is in a great location for right handed shooters.
Integrated laser add on is a nice touch.
Solid construction.
Rubber Butt Pad is nice and thick.
Removable barrel to reduce size for easier transportation.
Also come in Airsoft version.
Cons:
DOA Trigger pull is a bit long which will slow down rapid fire shooting a bit.
Mostly Plastic Polymer build.
Why not a longer inner barrel for possible more fps?
Comments: It's nice when a new action shooting air rifle comes out on the market since there are not a ton of them. The ASG TAC 4.5 CO2 Air Rifle is a nice addition if you're looking for a BB shooter for plinking around the yard. You can also get an Airsoft firing version too called the ASG TAC 6 CO2 Airsoft Rifle if you want to shoot some rounds that are a little bit less destructive and more game friendly. The ASG TAC 4.5 CO2 Air Rifle offers a lot of customizability with its top and bottom rails for accessories which allow for the placement of the included removable iron sights and Bipod. I would recommend adding a red dot sight and perhaps even a tac light to really dec out this modern looking air rifle.
My Vimeo Table Top Review Video for the ASG TAC 4.5 CO2 Air Rifle:
I don't generally make unboxing videos, usually I'll make a preview video if I want to get the word out that I have a new product for review but I thought I would change things up a bit with the ASG TAC-4.5 CO2 Air Rifle Unboxing Video. There are actually two version of this rifle, the TAC-4.5 and the TAC-6. The ASG TAC-6 CO2 Air Rifle is the Airsoft equivalent, pretty much identical to the TAC-4.5 with the acceptation of shooting 6mm Plastic Airsoft BB's.
Getting back to the ASG TAC-4.5 CO2 Air Rifle, it uses a standard 12 gram CO2 cartridges to shoot 4.5mm Steel BB's at around 417 fps. The BB's are stored in its 21 round metal stick magazine similar to what you would find in many standard BB pistols. I'm pretty sure this rifle is actually internally a pistol of sorts and even the barrel internally is short like a pistol. The external longer barrel that you see is mainly for show to give the ASG TAC-4.5 CO2 Air Rifle its rifle appearance. The TAC outer shell is made of synthetic plastic keeping the ASG TAC-4.5 CO2 Air Rifle fairly light at around 3.5 pounds.
You will find Weaver/Picatinny rails top and bottom with removable fiber optic iron sights and a removable Bipod with adjustable legs. The rear stock has a rubber Buttplate for added comfort. I found it interesting that the ASG TAC-4.5 CO2 Air Rifle has an area right at the front in the stock for an optional laser sight.
Look forward to a more detailed Table Top and Field Test Shooting Video coming out shortly for the ASG TAC-4.5 CO2 Air Rifle.
I'm trying to remember if I have ever reviewed a Gas Operated Bolt Action Airsoft Rifle before or not? I know I have reviewed Spring Operated Bolt Action Airsoft Rifles but I think this is a first for me. With Spring Bolt Action Airsoft Rifles there is some work involved in the back and forth movement of the bolt since the power is coming from the spring tension, compared to a Gas Bolt Action Airsoft system there is virtually no resistance in the bolt so you can get off your follow up shots a lot quicker.
I would like to get out and test the KJWorks M700P Gas Bolt Action Airsoft Rifle at a much longer distance than here in my Indoor Sea Can Airgun Range but the weather outside right now is kind of cold and wet. Perhaps in the summer I can do a revisit of the KJWorks M700P Gas Bolt Action Airsoft Rifle and test it out at amuch longer range using heavier Airsoft BB's.
For this indoor short range testing I used .20 gram Plastic Airsoft BB's and placing 5 shots through my Chrony Chronograph I got a an average of 382 fps. The gas magazine was fully topped up using propane gas and the temperate was around 15 degrees Celsius (60 degrees Fahrenheit).
Again using .20 gram Plastic Airsoft BB's I then performed my close range accuracy test (about 30 feet away) and the KJWorks M700P Gas Bolt Action Airsoft Rifle shot about a 1.5 inch grouping with one outlier that went kind of low, perhaps a bad Airsoft BB? With most sniper style Airsoft rifles you will want to use heavier gram Airsoft BB's which should help with accuracy so I would expect the KJWorks M700P Gas Bolt Action Airsoft Rifle to tighten up a bit using a .30 or higher gram BB.
If you haven't already, make sure to watch my Table top Video Review for the Cybergun Taurus PT24/7 G2 Airsoft Pistol to see it up close and get all the details and specifications on this fine Airsoft pistol.
In this Field Test Shooting Video I put the Cybergun Taurus PT24/7 G2 Airsoft Pistol through its paces to see what the fps velocity is and what kind of accuracy grouping we can get. Starting with power, I shot 5 rounds of .20 grain plastic Airsoft BB's through my Chrony Chronograph and average 410 fps, that's pretty fast for a blowback Airsoft pistol!
Next up was the accuracy portion of this shooting review and as I alway do here in my indoor Sea Can Shooting Range, I setup a paper target 30 feet away and shot from a seated stabilized position. I did find the Cybergun Taurus PT24/7 G2 Airsoft Pistol shot a bit high for me right out of the box without any hop-up adjustments. In terms of accuracy the Cybergun Taurus PT24/7 G2 Airsoft Pistol did not perform as well as I would have liked it to, perhaps a different ammo choice and or playing around with the hop-up may have helped but either way I got around a 7 inch 10 shot grouping. This is perfectly fine for close quarter combat but if you plan on hitting anything far away, the Airsoft BB is fast enough to get there but sniper accuracy is not going to happen.
Overall the Cybergun Taurus PT24/7 G2 Airsoft Pistol feels great to shoot, it has a really nice trigger and solid blowback action. Perhaps with a little bit of playing around with this quality Airsoft pistol I could get it to tighten up its grouping a little bit?
Hopefully we are back in business after the YouTube Attack on Airgun channels. I'm still waiting for YouTube to get back to me on the video that they put a strike on. I did appeal the Strike but so far YouTube has not responded...
We must push forward and so here is my first video back and it's a good one! If you haven't already watched my Table Top Review of the Umarex SA10 CO2 Blowback Pellet and BB Pistol, make sure to check it out for details and some nice up and close video of this fine dual ammo CO2 air pistol.
As always during my indoor Sea Can Field Test Shooting videos, I first test out the velocity of each gun. Since the Umarex SA10 CO2 Blowback Pellet and BB Pistol can shoot both 4.5mm Steel BB's and .177 caliber pellets I tested both ammo types using my Chrony Chronograph. I fired three shots of each ammo to get an average fps velocity. Interestingly the heavier 6.9 grain lead pellets had the higher average velocity of 376 fps versus 304 fps with 5.1 grain Steel BB's. I have a feeling the lead pellets fit the barrel more snug and did not let any of the CO2 blow by creating more back pressure and a higher velocity.
After my velocity test I proceeded to find out which ammo type was going to be more accurate with the Umarex SA10 CO2 Blowback Pellet and BB Pistol. Since each rotary magazine holds 8 rounds it made sense for me to put 8 shots of each ammo type into the paper target setup 30 feet away. Keep in mind the Umarex SA10 CO2 Blowback Pellet and BB Pistol has a riffled barrel best suited for lead pellets so going into this test I was expecting the pellets to be the clear winner here.
I was able to get about a 2 inch 8 shot grouping using .177 caliber lead pellets with the Umarex SA10 CO2 Blowback Pellet and BB Pistol. All shots where fairly well centered but I did notice that most shots actually hit all within a very tight 1/2 inch group with 3 shots coming out a bit and extending the grouping more or less vertically. Switching up the ammo to steel BB's and as expected the groupings extended to about 3 inches with one outlier hitting very wide for some reason? Even with the steel BB's shot placement on the target was well centered in general.
The blowback on the Umarex SA10 CO2 Blowback Pellet and BB Pistol is very pronounced but does not rock your hands too much keeping this airgun on target between shots and the trigger is one of the best rotary mag type trigger I have tested to date, extremely smooth throughout the entire trigger pull. Overall the Umarex SA10 CO2 Blowback Pellet and BB Pistol has great looks, decent power and good accuracy going for it and could perhaps be one of my top pics if you're looking for a blowback pellet pistol option.
This video is to explain why the Replica Airguns YouTube channel doesn't have any videos listed.
The removal or privatization of Replica Airguns YouTube videos was done as a precaution to make sure YouTube does not terminate the Replica Airguns YouTube Channel due to the recent attack on Airgun YouTube Channels. YouTube has been handing out strikes to videos that have led to many popular Airgun related YouTube channels being terminated this past week.
Replica Airguns did receive one of these strikes to a blank gun video I made several years back. The video in question simply shows me testing a blank gun by shooting it in my pool house. YouTube claims that the video in question contained illegal behavior or could potentially elicit illegal behavior from viewers? I guess all the other thousands of people shooting blank guns on YouTube is OK but this video for some reason was not OK?
I am not sure where this is all going and what will happen with Airgun channels and Airgun videos on YouTube but I will keep you posted as I find out...
