Umarex HK P30 AEG Full Auto Airsoft Pistol Table Top Review

No Comments

Type: BB air pistol.
Manufacturer: Umarex USA.
Model: HK P30
Materials: All pastic outer shell.
Weight: .5 pounds (227 grams)
Barrel: Metal non-rifled 4.25 inches (106mm).
Total Length: 7 inches (178mm)
Propulsion: CO2 x 1.
Action: Semi & full auto blowback, single action only.
Ammunition Type: 6mm Plastic Airsoft BB's.
Ammunition Capacity: 16 round plastic curved stick magazine x2.
FPS: 180
Rate of fire: 200 shots/min.

Trigger Pull: The trigger on the Umarex HK P30 AEG Full Auto Airsoft Pistol is electric as it is an AEG Pistol that requires batteries to operate. The trigger is basically an ON/Off switch that activates the blowback which also seems to create the pressure to propel an Airsoft BB. Mind you not all that fast but fast enough for perhaps a more safe indoor/basement type Airsoft war? Getting back to the trigger pull I would say it is light but on the ing side for an AEG.

Accuracy: You will have to stay posted for my proper Field Test Shooting Video for the Umarex HK P30 AEG Full Auto Airsoft Pistol. That said I did pop off a magazine of BB’s (16 rounds), some in semi auto and some in full auto. Do not expect this Airsoft pistol to be all that powerful as it can barely penetrate a paper target. I was expecting the cycle rate of full auto to feel slower than it actually shot so that’s a good thing! I see this as almost an alternative to a nerf gun but using Airsoft BB’s. Do this at your own risk and please use proper eye protection. I can not comment too much on accuracy as I was just pointing and shooting to get a basic feel for the gun.

Build Quality: The Umarex HK P30 AEG Full Auto Airsoft Pistol is a low cost all plastic Airsoft pistol which kind of says it all. Being super light weight means if you drop it, chances are it will be fine because it is so light weight. Fit and finish are decent but without seeing what’s inside I can only guess at how long it will last.

Realism: The Umarex HK P30 AEG Full Auto Airsoft Pistol is a true licensed replica via Umarex. It is about the right shape and size as a real HK P30 and other than the orange tip could fool most people unless really close up to it and of course holding it. It also has a kind of out of place grip safety on the front which is not an HK attribute. Being an AEG with batteries in the grip there is no full size magazine and again as it is all plastic it does not have nearly the same weight as a real HK P30. The only working mechanical parts are essentially the trigger, grip safety and selector switch in the trigger area.

Available From: The Canada and US Replica Airgun Stores.

Pros:

  • Drop out stick mags are nice for continuous shooting without having to reload as often.

  • Has a rail for accessories.

  • Working slide with blowback action.

  • Shoots in both semi and full auto selectable.

  • No CO2 so perhaps better in colder weather being an AEG, lower cost to operate!

  • Walther licensing via Umarex.

  • Grip safety to help stop unwanted accidental shots.

  • Serial number on receiver.

  • Warning instructions are non-obtrusive.

  • Trigger is nice and light being an AEG.

Cons:

  • Is very light weight being almost all plastic.

  • Low claimed fps and slow full auto cycle rate.

  • Orange tip.

  • Sights are all black, harder to see on dark objects

Comments:

The Umarex HK P30 AEG Full Auto Airsoft Pistol is a rather different sort of beast! On one hand it is not what you would expect to see someone using in an Airsoft game but I really don’t think that’s what it is meant for anyway. It’s really just a fun gun for plinking without having to worry to much about safety as if you do something stupid, the consequences will not be too sever! I would say it could possibly be used as an alternate to using a Nerf gun for fun little backyard squishes or shooting indoors. The Umarex HK P30 AEG Full Auto Airsoft Pistol is not for everyone but I am guessing it could be a lot of fun when used in the right situations.

Watch my Table Top Video Review for the Umarex HK P30 AEG Full Auto Airsoft Pistol:

Categories: 6mm, AEG, Airsoft, Blowback, Full Auto, Pistol, Review, Semi Auto, Vimeo Video Tags: HK P30, Umarex

Arcturus AR06 - NY03CB AEG Airsoft Rifles Table Top Review

No Comments

Type: Airsoft Rifle.
Manufacturer: Acturus.
Model: AR06 & NY03CB.
Materials: Mostly all Metal.
Weight: 5.6/4.9 pounds (2.5/2.2 kilograms).
Length: 27.4-30.7/31.7-35 inches (695-780/805-890mm)
Barrel Length: 11/14.6 inch (280/370mm) inner 6.02mm tight bore non rifled.
Propulsion: AEG (with Deans Connectors).
Action: Semi & Full Auto SAO.
Ammunition Type: 6mm Airsoft BB's.
Ammunition Capacity: Hi Cap/Mid Cap - 550/135
FPS: 380-400fps.

Trigger Pull: The trigger pull on the Arcturus AR06 - NY03CB AEG Airsoft Rifles like other AEG Rifles is not mechanical as they are essentially electrical driven so basically the trigger is an on/off switch that is closest in feel to a single action only trigger since it is light and short. You will notice a slight delay between pressing the trigger and the actual round being fired since the trigger activates a motor which first pulls the air spring back. Once the spring is fully drawn back it releases and compresses the air which then propelled the 6mm Airsoft BB. The higher voltage battery you use like an 11.1 volt will shorten the delay as the motor will spin faster and pull back the spring quicker allowing for less noticeable delay and also a higher rate of full auto fire which in this rifle is very noticeable.

Accuracy: I have not Field Test Reviewed either the Arcturus AR06 - NY03CB AEG Airsoft Rifles or even tried them out yet. I hope to get to my Field Test Shooting Video for both of them later next week, until then we can assume they will shoot similar to most other AEG rifles with tighter bore barrels. I am expecting at least a 2 inch grouping at 30 feet down range in semi auto. In terms of velocity the test paper which they come with claims around 390+fps.

Build Quality: The Arcturus AR06 is a mostly metal with a full metal receiver while the NY03CB has a polymer or plastic receiver which from what I can tell only other components being plastic would be the pistol grips and rear stock. other metal parts on both AR type Airsoft Rifles would be the rail setup, the barrel, the charging handle, the buffer tube, the dust cover, the trigger, the selector switch, the magazine release and bolt release. Fit and finish for both guns is very good.

Realism: The Arcturus AR06 - NY03CB AEG Airsoft Rifles are based on the AR platform with both versions looking the part of a real steel AR. They do come with the removable orange tips installed but they also come with black flash hiders so you can easily switch them out adding to the realism. The metal receiver on the AR06 does give it a bit more weight but even the NY03CB has a decent weight and solid feel to it. Most of the controls work just like a real steel AR including the charging handle, bolt release, selector switch and magazine release.

Pros:

  • Two versions to meat your budget, both great options.

  • Quality components throughout both versions. Only real difference is nylon fiber receiver vs metal receiver and slight upgrade motor on AR06 version from Long Type to Long Type 19k torque motor on AR06.

  • Have been quality control inspected including 5 round recorded fps test with .20 gram Airsoft BB’s.

  • Both  have a functioning bolt catch.

  • Both come with Quick release two position fully adjustable pop-up sights.

  • Both come with additional black flash hiders.

  • Lots of rial mounting options in Picatinny and M-LOK.

  • 6 position adjustable rear stocks.

  • Easy access to motor for any possible trouble shooting you may need to do.

  • Additional grip plate option.

  • Ambidextrous controls and ambidextrous sling mounting points (QD on AR06).

  • Two magazines come with AR06 (Mid Cap and High Cap).

Cons:

  • Limited battery options as area is small.

  • Kind of need a tool to remove rear stock for battery access. (Could change the rear stock)

  • Mystery accessory baffles me and not mentioned in the manual.

Comments:

Like the AK series of Acturus AEG Airpot Rifles, the Arcturus AR06 - NY03CB AEG are good value for the money with the AR06 offering a slightly higher premium over the lower cost NY03CB. But don’t let the lower price fool you into thinking you are getting a sub-standard product as both versions are built with many of the same components. I personally like the more compact look of the Arcturus AR06 AEG Airsoft Rifle but then again the price of the NY03CB AEG Airsoft Rifle is hard to ignore. Either way you can’t go too wrong so make your pick and enjoy owning one of them.

My Table Top Video of the Acturus AR06 - NY03CB AR AEG Airsoft Rifles:

Categories: 6mm, AEG, Airsoft, Comparison, Full Auto, Review, Rifle, Semi Auto, Vimeo Video Tags: Acturus, Acturus AR06, AR06, Acturus NY03CB, NY03CB

Umarex T4E HDB .68 Caliber Paintball Shotgun Table Top Review

No Comments

Type: Paintball Shotgun.
Manufacturer: Umarex - T4E.
Model: Umarex T4E HDB.
Materials: Metal & Polymer.
Weight: 5.52 pounds (2.5 kg).
Barrel: 18.5 inches (470.5mm) Metal smooth bore.
Power Source: 1x12 gram CO2.
Action: Semi Auto DOA with Internal Magazine.
Ammo Type: .68 Caliber Paintball or Rubber Ball.
Ammo Capacity: 16 Rounds.
FPS: 220 claimed

Trigger Pull: The trigger pull on Umarex T4E HDB .68 Caliber Paintball Shotgun is basically a Double Action Only Trigger as there is no blowback or way in which to preload a hammer or striker system. So basically your finger does all the work so the trigger pull is I would say about medium length and about medium pull. It does works just fine for fairly rapid follow up shooting. Each pull of the trigger also extends a rear breach-like tube that seals off the CO2 from the internal magazine or there would be a lot of CO2 leakage.

Accuracy: Normally I do not get the chance to perform the Field Test before making my Table Tope Video Review but with the Umarex T4E HDB .68 Caliber Paintball Shotgun, I did it the other way around so I do have performance metrics I can share with you, at least summarized. I suggest watching my Full Field Test Shooting Video Review for the Umarex T4E HDB .68 Caliber Paintball Shotgun for a the full breakdown. In summary, the Umarex T4E HDB .68 Caliber Paintball Shotgun shot a bit low on the target but had a decent grouping of I would say around 4-6 inches which is really good for a Paintball Gun. In terms of power my Chronograph results shooting 5 rounds produced an average of 176fps but the temperature was not super warm so in warmer conditions you can expect this to go up a bit, I would say 200fps is realistic.

Build Quality: The build quality of the Umarex T4E HDB .68 Caliber Paintball Shotgun is really good for the lower price of this unit compared to other higher priced T4E products, you will get a pretty much all plastic outer shell. That said there is still a fair amount of metal in this PaintBall Shotgun including the barrel, internal magazine, sights, trigger, sling mounts and some internal parts. All in all the Umarex T4E HDB .68 Caliber Paintball Shotgun has a good weight and feel to it with nice fit and finish.

Realism: The Umarex T4E HDB .68 Caliber Paintball Shotgun as far as I know is not an exact replica of any specific Shotgun but it does look like what you would expect to see from a Pistol Grip Tactical Styled Shotgun. In terms of mechanical working parts everything does what it supposed to do and works as expected.

Purchase it from the Canada Replica Airguns Store or the US Replica Airguns Store

Pros:

  • Accuracy was really good, probably my tightest grouping so far to date with a Paintball Gun shooting at 30 feet away.

  • Lots of mounting option for accessories like a tac light, laser or other sighting option with it’s top and side picatinny rail and M-LOK setup.

  • Quick CO2 pierce system so you can leave a CO2 in it ready to go any time with no worries about CO2 leaking out over time.

  • Simple to use Cross Bolt Safety.

  • Nice high capacity super easy to load 16 round magazine.

  • Ambidextrous sling mountain points.

  • Low cost for what you get compared to other Umarex/T4E products.

  • Build quality feels pretty good considering it is a much lower cost than other T4E rifles/shotguns.

  • Looks very intimidating.

Cons:

  • Mostly plastic external build.

  • Sights are not adjustable.

  • Will not get lots of shots per single CO2.

  • No rear stock so will not be as accurate using a non rested shooting posting.

Comments:

The Umarex T4E HDB .68 Caliber Paintball Shotgun is a well built and decent performing Paintball Shotgun and for the price you do get a lot of gun for your money. In some ways it even outperforms the HDX in my books including lower price, ease to load, quicker follow shots being semi auto, more compact size and even accuracy was better with the Umarex T4E HDB .68 Caliber Paintball Shotgun. So if you’re on a budget, don’t feel like you are compromising at all here, you are getting a really good Paintball Shotgun solution!

Categories: .68 cal, CO2, Paintball, Pistol, Review, Rifle, Semi Auto, Vimeo Video Tags: Umarex, T4E HDB, T4E

Umarex S&W M&P 9L Blowback CO2 Airsoft Pistol Field Test Review

No Comments

Yet another Field Test Shooting Video performed in the Replica Airguns Indoor Airgun Sea Can Shooting Range! In this Field Test I shoot the Umarex S&W M&P 9L Blowback CO2 Airsoft Pistol to see what kind of velocity and accuracy it has shooting .20 gram Airsoft BB’s with a brand new CO2 cartridge. If you are interested in the specifications and details along with some more close up video than watch my Table Top Review Video here.

Like pretty much every Field Test Shooting video I first perform the Chronograph Velocity Test since my CO2 is the most fresh at this point. I didn’t check the temperature in the Sea Can but I generally keep it around 20-22 degrees Celsius which is 68-72 Fahrenheit. I was a bit amazed at the high velocity of the Umarex S&W M&P 9L Blowback CO2 Airsoft Pistol in my testing as the claimed fps was 410 and most guns don’t live up to their claims exactly. The Umarex S&W M&P 9L Blowback CO2 Airsoft Pistol shooting 5 shots through the Chronograph averaged 431 fps with the slowest shot at 427fps and the fastest shot hitting 439fps so consistency was good!

Next I setup a fresh paper target 30 feet downrange and proceeded to place 10 rounds in it using a rested shooting position with my hands resting on a sandbag up front and seated in the back. Watch the video to see what actually happened but in a nut shell the Umarex S&W M&P 9L Blowback CO2 Airsoft Pistol shoots really high at 30 feet, at least 10 inches. So I did need to figure out where it was shooting before I actually got rounds on the paper. It was a bit hard to figure out the precise 10 shot grouping since some rounds may have even shot over the target when I was aiming at the bottom of the target but my best estimate is around 3-4 inches.

Other than the rather high shot placement which may be adjustable to some degree by adjusting the hop-up,I would say the Umarex S&W M&P 9L Blowback CO2 Airsoft Pistol is a very nice gun. The power is really good and may even be a bit much for close quarters indoor games but outdoors where you are shooting longer ranges it should perform well in these conditions. The blowback is very strong and the trigger feels good. If you don’t mind adjusting your shooting point a bit then the Umarex S&W M&P 9L Blowback CO2 Airsoft Pistol would be a great choice as your sidearm.

Categories: 6mm, Airsoft, Blowback, CO2, Field Test, Pistol, Review, Semi Auto, Vimeo Video Tags: Umarex, M&P 9L, S&W M&P

Umarex T4E HDB .68 Caliber Paintball Shotgun Field Test Review

No Comments

In this Field Test Shooting Video I test out the Umarex T4E HDB .68 Caliber Paintball Shotgun to see what the actual fps is and what kind of accuracy we can get out of these .68 Caliber Rubber balls at 30 feet down range. I have not done a Table Top Video just yet for the Umarex T4E HDB .68 Caliber Paintball Shotgun so stay posted for that upcoming video so stay posted for that, in the meantime you can watch my Preview Videos where I do show it up and close and go over some main specifications.

Starting with the velocity portion of this video I used .68 caliber rubber balls which are not super heavy and not made out of a very hard rubber as you can squish them with your fingers fairly easily. I put 5 rounds through my chronograph after loading a pair of 12 gram CO2 cartriges into the CO2 chamber. My results averaged 176fps which may seem slower than expected but they did hit my target pretty hard pulling the paper in with them. Each round was fairly consistent ranging from 167 to 182 fps trailing off a bit after each shot which is expected.

Moving on to the accuracy portion for the Umarex T4E HDB .68 Caliber Paintball Shotgun, I proceeded to shoot around 10 rounds into my fresh paper target setup 30 feet down range. My target is basically an 8.5 x 11 sheet of paper and my goal was ot get all my shots onto the paper which I easily managed. I was impressed with the grouping from the Umarex T4E HDB .68 Caliber Paintball Shotgun as it performed better than most Paintball guns using rubber balls. The shot placement was a bit lower than I was aiming but all the rounds where within I would say 4-5 inches of each other with no real outliers in the grouping.

All in all the Umarex T4E HDB .68 Caliber Paintball Shotgun performed better than I was expecting, I bit more fps would be nice but the rubber balls do hit the paper with a fair amount of energy, I would for sure not want to get hit by one at close range with light clothing on. The accuracy again was really good for a a paintball rifle and this being one of the lower cost Umarex T4E rifle/shotgun based products it performed as good if not better than much higher priced versions. If you’re looking for a fun Paintball Rifle that won’t break the bank and has a good feature set then pick one up for us!

Categories: .68 cal, CO2, Field Test, Review, Rifle, Semi Auto, Vimeo Video Tags: Umarex, T4E, HDB

Umarex HK P30 - T4E HDB - ASG Dan Wesson 2.5 - KJWorks KP13 Update Preview

No Comments

In this Preview Review Video I take a look at 4 newer products now in our Replica Airguns Online Store. One is a 4.5mm Steel BB Revolver, two are 6mm Airsoft Pistols and one is a .68 caliber Paintball Shotgun.

The first item I take look at in this video is the Umarex HK30 AEG Airsoft Pistol, this product is pretty entry level with analyst all plastic build and is very light to hold. It does however shoot in both semi and full auto since it is an AEG Airsfto Pistol (not many of them out there). The fps is rather low at a claimed fps at just under 200, the Umarex HK30 AEG Airsoft Pistol also comes with two 16 round remove; plastic magazines. Who knows, maybe it will be fun?

Next I take a look at the ASG Dan Wesson 2.5 inch 4.5mm Steel BB Gold Revolver. This is a CO2 powered shell loading BB revolver very much like similar ones I have reviewed in the past but in Gold finish. Will the gold finishes make it perform better, well I guess we better find out!

I then take a look at a “Glock Like” CO2 Blowback Airsoft Pistol for KJWorks called the KP13. It has a full size drop out metal magazine that holds the CO2 along with 24 rounds of 6mm Airsoft BB’s. The KJWorks KP-13 has a metal slide, metal magazine and polymer frame with a velocity over 360fps using the included barrel extension.

Last but perhaps the most interesting for me is the Umarex T4E HDB which is a lower cost Paintball/Rubber Ball Shotgun which could possibly be used for home protection? The T4E HDB is a mostly plastic constructed rifle with decent weight to it and uses an internal spring fed 16 round magazine. You will find all kinds of mounting points for accessories and for a sling on the Umarex T4E HDB and again at much lower cost than similar T4E rifle based Paintball/Rubber ball Airguns.

Categories: .68 cal, 4.5mm / .177 cal, 6mm, AEG, Airsoft, BB, Blowback, CO2, Full Auto, Pistol, Review, Revolver, Rifle, Semi Auto, Vimeo Video Tags: Umarex, T4E, HDB, T4E HDB, HK P30, H&K, KJWorks, KP-13, ASG, Dan Wesson

March Update - Back to Normal - EUC Upgrade

No Comments

This update is mostly for my Replica Airguns channel as I don't review things going on in my personal life as much over on that channel as I do over on the Get Fit Over 40 channel, but I figure there may be some interest from the Airgun community in something like an EUC (Electric Unicycle) since both Airguns and Electric Vehicles are both really cool :)

One of the main points I wanted to mention was that while I was in the hospital one thing I focussed on as a goal to get to in my recovery was riding my EUC again and for the past couple of weeks I have been back on it! Which means in a way I am achieving my recovery goals and I have to say I feel great and feel like life is getting back to some sort of normal. This is wonderful for my Video Channels as it means I am making videos again just like before!

I also talk about yet another upgrade I made in terms of the EUC I am riding. I started out my EUC adventure with the Begode Tesla T3 which is an awesome learner and city commuter EUC since it is fairly light weight but still has decent power and range. My goal was to get a larger more powerful EUC with longer range capability and so when I saw the Begode EXN on Facebook Marketplace at a price I could not pass on I snatched it up and sold my Tesla T3. The Begode EXN has been a ton of fun and I have learned a lot riding it but I really felt like I needed a suspension EUC Wheel for safety reasons as having suspension really smooths out the ride on all surfaces and makes it less likely for me to get thrown off.

Again another EUC I could not pass on showed up in Facebook Marketplace and now here we are with my third EUC the Kinsong S22 which is pretty much exactly a perfect fit for me as it has good power, decent battery life for good distance ridding and one of the best suspensions you can get on an EUC. Now all I have to do is sell my Begode EUC :)

Categories: Tags:

Acturus AK05 AK AEG Airsoft Rifle Table Top Review

No Comments

Type: Airsoft Rifle.
Manufacturer: Acturus.
Model: AK05.
Materials: Mostly all Metal.
Weight: 8.2 pounds (3.7 kilograms).
Length: 31.1 inches (790mm)
Barrel Length: 11 inch (280mm) inner 6.02mm tight bore non rifled.
Propulsion: AEG (with Deans Connectors).
Action: Semi & Full Auto SAO.
Ammunition Type: 6mm Airsoft BB's.
Ammunition Capacity: Hi Cap/Mid Cap - 550/135
FPS: 380-400fps.

Trigger Pull: The trigger pull on the Acturus AK05 AK AEG Airsoft Rifle like other AEG Rifles is not mechanical as it is essentially electrical driven so basically it is an on/off switch that is closest in feel to a single action only trigger since it is light and short. You will notice a slight delay between pressing the trigger and the actual round being fired since the trigger activates a motor which first pulls the air spring back. Once the spring is fully drawn back it releases and compresses the air which then propelled the 6mm Airsoft BB. The higher voltage battery you use like an 11.1 volt will shorten the delay as the motor will spin faster and pull back the spring quicker allowing for less noticeable delay and also a higher rate of full auto fire which in this rifle is very noticeable.

Accuracy: I have not Field Test Reviewed the Acturus AK05 AK AEG Airsoft Rifle or even tried it out yet. I hope to get to my Field Test Shooting Video for the AK05 later next week, until then we can assume it will shoot similar to most other AEG rifles with tighter bore barrels. I am expecting at least a 2 inch grouping at 30 feet down range in semi auto. In terms of velocity the test paper work it comes with claims around 390+fps.

Build Quality: The Acturus AK05 AK AEG Airsoft Rifle is almost all metal in design with from what I can tell only the pistol grip being plastic. The receiver and top dust cover are both hardened steel with the receiver made out of stamped steel just like areal AK. The AK05 is nice and heavy for its size and the fit and finishes is very good all around. Internal parts are all of high quality too.

Realism: The Acturus AK05 AK AEG Airsoft Rifle is based on the AK platform with this version being a more compact and tactical model. Externally it looks the part for sure, holding it in your hands it feels the part too. As expected the insides are all Airsoft but you would need ot take the dust cover off or pull back the charging handle to figure this out. Again the Acturus AK05 AK AEG Airsoft Rifle is an almost all metal Airsoft Gun with an actual stamped steel receiver and steel dust cover, it’s hard to get much more realistic looking and feeling than that.

Pros:

  • Lots of mounting options: Picatinny rails, M-LOK, AK Side Rail.

  • Semi and full auto adjustable.

  • 5 position adjustable rear stock.

  • Mostly metal construction and lots of actual steel including the receiver and dust cover.

  • Lots of weight to it at 8.2 pounds, feels awesome to hold.

  • Comes with two magazines, one Hi Cap and one Mid Cap.

  • Comes with a secondary all black squared off flash hider.

  • On the fly adjustable rear sight for elevation.

  • Quick change spring system.

  • Easy to get to and adjust rotary hop-up adjustment.

  • Should be good for longer range shooting with nice high claimed fps.

Cons:

  • Will need a very specific battery type, thin and long.

  • Rear sight only adjustable for windage and not elevation.

  • May even be a bit heavy for all day use.

Comments:

The Acturus AK05 AK AEG Airsoft Rifle along with the other Acturus AK Airsoft Rifles is in my opinion one of the nicest AEG AK based Airsoft rifles you can get, at least in the mid price ranges. Being all metal with actual stamped steel parts really makes the AK05 feel realistic and of high quality. If you’re looking for something with a bit more heft than the Acturus AK06 that has a more useful rear stock at least in terms of adjustability and don’t mind giving up some of the compact features of the AK06 then perhaps the AK05 is more for you. IN my opinion the Acturus AK05 AK AEG Airsoft Rifle is a great combination of quality, size and features, hopefully my upcoming Field Test Shooting Review backs up the performance aspect and we can add that to the list.

Categories: 6mm, AEG, Airsoft, Full Auto, Review, Rifle, Semi Auto, Vimeo Video Tags: Acturus, Acturus AK05, AK05

Acturus AK06 AK AEG Airsoft Rifle Table Top Review.

No Comments

Type: Airsoft Rifle.
Manufacturer: Acturus.
Model: AK06.
Materials: Mostly all Metal.
Weight: 6 pounds (2.7 kilograms).
Length: Folded/unfolded 18.9/27.4 inches (480/695mm)
Barrel Length: 9.8 inch (250mm) inner 6.02mm tight bore non rifled.
Propulsion: AEG (with Deans Connectors).
Action: Semi & Full Auto SAO.
Ammunition Type: 6mm Airsoft BB's.
Ammunition Capacity: Hi Cap/Mid Cap - 550/135
FPS: 380-400fps.

Trigger Pull: The trigger pull on the Acturus AK06 AK AEG Airsoft Rifle like other AEG Rifles is not mechanical as it is essentially electrical driven so basically it is an on/off switch that is closest in feel to a single action only trigger since it is light and short. You will notice a slight delay between pressing the trigger and the actual round being fired since the trigger activates a motor which first pulls the air spring back. Once the spring is fully drawn back it releases and compresses the air which then propelled the 6mm Airsoft BB. The higher voltage battery you use like an 11.1 volt will shorten the delay as the motor will spin faster and pull back the spring quicker allowing for less noticeable delay and also a higher rate of full auto fire which in this rifle is very noticeable.

Accuracy: I have not Field Test Reviewed the Acturus AK06 AK AEG Airsoft Rifle or even tried it out yet. I hope to get to my Field Test Shooting Video for the AK06 later next week, until then we can assume it will shoot similar to most other AEG rifles with tighter bore barrels. I am expecting at least a 2 inch grouping at 30 feet down range in semi auto. In terms of velocity the test paper work it comes with claims around 370fps.

Build Quality: The Acturus AK06 AK AEG Airsoft Rifle is almost all metal in design with from what I can tell only the pistol grip being plastic. The receiver and top dust cover are both hardened steel with the receiver made out of stamped steel just like areal AK. The AK06 is nice and heavy for its size and the fit and finishes is very good all around. Internal parts are all of high quality too.

Realism: The Acturus AK06 AK AEG Airsoft Rifle is based on the AK platform with this version being a more compact and tactical model. Externally it looks the part for sure, holding it in your hands it feels the part too. As expected the insides are all Airsoft but you would need ot take the dust cover off or pull back the charging handle to figure this out. Again the Acturus AK06 AK AEG Airsoft Rifle is an almost all metal Airsoft Gun with an actual stamped steel receiver and steel dust cover, it’s hard to get much more realistic looking and feeling than that.

Pros:

  • Lots of mounting options: Picatinny rails, M-LOK, AK/SVD Side Rail.

  • Semi and full auto selectable.

  • All metal folding rear stock.

  • Mostly metal construction and lots of actual steel including the receiver and dust cover.

  • Lots of weight to it at 6 pounds, feels awesome to hold.

  • Comes with two magazines, one Hi Cap and one Mid Cap.

  • Comes with a secondary all black squared off flash hider.

  • Super compact design.

  • Quick change spring system.

  • Easy to get to and adjust rotary hop-up adjustment.

  • Should be good for longer range shooting with nice high claimed fps.

Cons:

  • Will need a very specific battery type, thin and long.

  • Sights are non adjustable.

  • Folding type rear stock not adjustable for pull length.

Comments:

The Acturus AK06 AK AEG Airsoft Rifle along with the other Acturus AK Airsoft Rifles is in my opinion one of the nicest AEG AK based Airsoft rifles you can get, at least in the mid price ranges. Being all metal with actual stamped steel parts really makes the AK06 feel realistic and of high quality. I also like the compact tactical features of the Acturus AK06 AK AEG Airsoft Rifle making it easy to put in a backpack but not too heavy to lug around all day long. The Acturus AK06 AK AEG Airsoft Rifle also has a decent velocity and fairly fast rate of fire especially when using a higher voltage battery so you can expect excellent performance even from such a small compact AEG Airsoft Rifle.

My Table Top Video of the Acturus AK06 AK AEG Airsoft Rifle:

Categories: 6mm, AEG, Airsoft, Full Auto, Review, Rifle, Semi Auto, Vimeo Video Tags: Acturus, AK06, Acturus AK06

Arcturus AEG Airsoft Intro Preview Unboxing Video Review

No Comments

In this Preview Unboxing Video I Take a look at 4 new Airsoft products from Arcturus all of them being AEG Airsoft Rifles with two based on the AK platform and the other two based on the AR platform. Three of the AEG Airsoft Rifles are mostly metal while I also feature a lower cost version with a Nylon Fiber Polymer receiver. All of these Replica AEG Airsoft Rifles are very good quality but you will get all metal (mostly steel and aluminum) build and a Hi-Cap and Mid-Cap magazine with the higher cost versions.

Arcturus AK05 AK AEG Airsoft Rifle:

  • Type: Airsoft AEG.

  • Manufacturer: Arcturus.

  • Caliber: 6mm plastic Airsoft BB's.

  • FPS Range: 380-400.

  • Magazine Capacity: 550rd Hi-Capacity and 30/135rd Mid-Capacity.

  • Thread Direction: 14mm Negative.

  • Gearbox: Version 3 Full Metal w/ Quick Change Spring, Fully Upgradeable.

  • Motor: Short Type.

  • Fire Modes: Semi/Full-Auto, Safety.

  • Battery: 9.6v Small Stick Type or 7.4v stick LiPo recommended.

  • Battery Location: Wired to dust cover with small Tamiya connector.

  • Hopup: Yes, Adjustable.

  • Inner Barrel: 280mm / 6.02mm.

  • Length: 790mm - 875mm, Adjustable.

  • Weight: 3730g.

  • Package Includes: Gun, Hi-Cap Magazine, Mid-Cap Magazine.

Arcturus AK06 AK AEG Airsoft Rifle:

  • Type: Airsoft AEG.

  • Manufacturer: Arcturus.

  • Caliber: 6mm plastic Airsoft BB's

  • FPS Range: 380-400.

  • Magazine Capacity: 550rd Hi-Capacity and 30,135rd Mid-Capacity.

  • Thread Direction: 14mm Negative.

  • Gearbox: Version 3 Full Metal w/ Quick Change Spring, Fully Upgradeable.

  • Motor: Short Type.

  • Fire Modes: Semi/Full-Auto, Safety.

  • Battery: 9.6v Small Stick Type or 7.4v stick LiPo recommended.

  • Battery Location: Wired to dust cover with small Tamiya connector.

  • Hopup: Yes, Adjustable.

  • Inner Barrel: 250mm / 6.02mm.

  • Length: 480mm, 695mm (Folded, Unfolded).

  • Weight: 2730g.

  • Package Includes: Gun, Hi-Cap Magazine, Mid-Cap Magazine.

Arcturus AR06 AR AEG Airsoft Rifle:

  • Type: Airsoft AEG.

  • Manufacturer: Arcturus.

  • Caliber: 6mm plastic Airsoft BB's

  • FPS Range: 380-400.

  • Magazine Capacity: 320rd Hi-Capacity and 130rd Mid-Capacity.

  • Thread Direction: 14mm Negative.

  • Gearbox: Version 2 w/ Quick Change Spring, Fully Upgradeable.

  • Motor: Long Type, 19k torque motor.

  • Fire Modes: Semi/Full-Auto, Safety.

  • Battery: 7.4v stick LiPo recommended.

  • Battery Location: Wired to buffer tube with small Tamiya connector.

  • Hopup: Yes, Adjustable.

  • Inner Barrel: 280mm / 6.02mm.

  • Length: 695mm - 780mm, Adjustable.

  • Weight: 2520g.

  • Package Includes: Gun, Hi-Cap Magazine, Mid-Cap Magazine.

Arcturus NY03CB AR AEG Airsoft Rifle:

  • Type: Airsoft AEG.

  • Manufacturer: Arcturus.

  • Caliber: 6mm plastic Airsoft BB's

  • FPS Range: 380-400.

  • Magazine Capacity: 330rd Hi-Capacity.

  • Thread Direction: 14mm Negative.

  • Gearbox: Version 2 Gearbox w/ Quick change spring system, Fully upgradeable.

  • Motor: Long Type.

  • Fire Modes: Semi/Full-Auto, Safety.

  • Battery: 7.4v stick LiPo recommended.

  • Battery Location: Wired to buffer tube w/ Deans Connector.

  • Hopup: Yes, Adjustable.

  • Inner Barrel: 370mm~ / 6.02mm.

  • Length: 805mm - 890mm, Adjustable.

  • Weight: 2020g.

  • Package Includes: Gun, Hi-Cap Magazine.

Categories: 6mm, AEG, Airsoft, Comparison, Full Auto, Review, Rifle, Semi Auto, Vimeo Video Tags: AK05, AK06, AR06, NY03CB, AK-47, Kalashnikov AK47, AR15, M4 Carbine, Acturus

Umarex NXG CO2 BB Pump Shotgun Field Test Review

No Comments

This review shows that low cost Airguns can perform just like higher priced Airguns. They may not be as realistic and all made out of metals for that added weight and feel but in terms of power and accuracy they can still get the job done as is with the Umarex NXG CO2 BB Pump Shotgun! In this Field Test Shooting Review I do just that, I test the power and accuracy first by shooting 5 rounds through my Chronograph to find out what the real world fps is, I then I shot 10 rounds down range at a fresh paper target to see what kind of grouping I can get and if the Umarex NXG CO2 BB Pump Shotgun is sighted in on the target out of the box.

Starting with the velocity test I first placed a brand new 12 gram CO2 into the Umarex NXG CO2 BB Pump Shotgun and loaded up the 10 rounds rotary magazine with Daisy Zinc Coated 4.5 mm Steel BB’s. The temperature was around 22 degrees Celsius which is 72 degrees Fahrenheit in the sea can indoor shooting range so not too warm or cold. The claimed fps from Umarex is 450, I was able to get an average of 403fps with the fastest shot hitting 425fps and the slowest shooting down to 388fps. So a bit under the Umarex claimed velocity but in the ball park.

Next I performed the accuracy test for the Umarex NXG CO2 BB Pump Shotgun and since the sights are non adjustable you kind of hope that where you aim is where the shots go but if they don’t then you will need to adjust your aim point just a bit. Out of the box the Umarex NXG CO2 BB Pump Shotgun did shoot a bit low but was fairly bang on side to side so when shooting at around 30 feet out you will need to aim just a tad over the intended target. Out of 10 shots, 8 rounds where all within a nice 1.5 inch grouping with a couple of flyers that I kind of want to keep out of this test because it was probably more me than the gun causing them to go off a bit. 1.5 inches is very good for a 4.5mm Steel BB Airgun!

All in all the Umarex NXG CO2 BB Pump Shotgun shot right around 400fps which is for sure a step up for something like a Red Ryder BB Rifle that at best can shoot 300fps. You also don’t have to work the pump as hard as you would the lever on a Red Ryder since the Umarex NXG CO2 BB Pump Shotgun is CO2 powered rather than spring powered. I also feel like the Umarex NXG Pump Shot was more accurate than the Red Ryder at least for me but that said some people can hit a nickel all day long with their Red Ryders! There are not a lot of Pump Action Looking Airguns out there in 4.5mm Steel BB versions and in more compact easier for younger or smaller shooters so if you fall into that category and want something in a shotgun format then the Umarex NXG CO2 BB Pump Shotgun may be perfect for you.

Categories: 6mm, BB, CO2, Field Test, Pump, Repeater, Review, Rifle, Vimeo Video Tags: Umarex, NXG Pump Shot

Umarex NXG CO2 BB Pump Shotgun Table Top Review

1 Comment

Type: BB Rifle.
Manufacturer: Umarex.
Model: NXG CO2 BB Pump Shotgun
Materials: Mostly all plastic construction.
Weight: 2 pounds (908 grams).
Length: 29.5 inches (749mm).
Barrel Length: 12 inches (30 cm) smoothbore barrel.
Propulsion: Single CO2 cartridge.
Action: Pump repeater.
Ammunition Type: 4.5mm steel BB's.
Ammunition Capacity: 10 rounds.
FPS: 450+ fps.

Trigger Pull: The trigger pull on the Umarex NXG CO2 BB Pump Shotgun is pretty decent, there is a short task up and fairly easy release as the pump action not only turns the rotary magazine but also cocks the internal hammer/striker system. So you will need to pump it before your first shot and after each shot.

Accuracy: I have not Field Test Reviewed the Umarex NXG CO2 BB Pump Shotgun yet but will be making a full Fields Test Review this week to find out what to expect in terms of accuracy and velocity. So we will find out if the fps is closer to the on the box specs of 450 fps or the mostly online specs of 490 fps. Perhaps somewhere in-between?

Build Quality: The Umarex NXG CO2 BB Pump Shotgun is almost all plastic which is not a bad thing in terms of quality and durability. The fact that it only weighs in at 2 pounds may make it feel kind of light and cheap but in a drop or fall situation it means it will most lily not sustain any damage because of the light weight. Most of todays airguns when made out of metals generally are made out of pot metal or zinc alloy which is a nice heavy metal that looks and feels great but is not super strong so when you drop a heavier gun made out of this material it can easily get damaged.

Realism: The Umarex NXG CO2 BB Pump Shotgun looks like a traditional pump action shotgun and even has a little bit of a recessed barrel to make it more believable but it is smaller in size since it is designed more for younger and smaller shooters. The light weight is not only a giveaway but makes ti feel more like a toy than a real gun. If you can ignore that then hopefully you can enjoy the Umarex NXG CO2 BB Pump Shotgun for what it is which is a low cost compact BB rifle made for customs interested in Airguns liek the Red Ryder but that perhaps want a bit more power.

Pros:

  • Low cost CO2 rifle great for all ages and sizes.

  • Has a fiber optic front sight.

  • Comes in a nice looking two tone Black/FDE color scheme.

  • Fairly easy to pump since the pumping action is not required to activate a spring or compress air.

  • Built in manual thumb safety.

  • Stock and high check rest position feel good and a good size length for smaller younger shooters.

  • Rotary drop out magazine holds 10 4.5mm steel BB’s for quick follow up shots.

  • Trigger feels pretty good, short and fairly light.

  • Full ambidextrous design.

  • Perhaps a step up for entry level shooter over a Red Ryder type BB rifle in terms of power.

  • Overall a decent looking air rifle.

Cons:

  • Mostly plastic, so a bit on the light weight side.

  • Sights are not adjustable in any way.

  • May be a bit cramped for larger shooters.

Comments: The Umarex NXG CO2 BB Pump Shotgun is not going to win any prizes for quality and realism but keep in mind it is really designed more for entry level younger shooters getting into the Airgun hobby. For them this will be not so intimidating as a larger, heavier more realistic version of a replica Shotgun. I think it will be realistic enough for most new Airgun Shooters and in terms of performance and features it is for sure a step up form something like a Red Ryder BB Rifle. I am looking forward to my upcoming Field Test Shooting Review out what the actual velocity is and what kind of groupings I can get shooting 30 feet down range on a paper target.

My Table Top Video of the Umarex NXG CO2 BB Pump Shotgun:

Categories: 4.5mm / .177 cal, BB, CO2, Field Test, Pump, Repeater, Review, Rifle, Vimeo Video Tags: Umarex, NGX, NXG Pump Shot

Umarex Legends CO2 Blowback Full Auto M3 Grease Gun Field Test Review

No Comments

Umarex has released yet another Legends Replica Airgun and perhaps this one may be the most iconic yet, the M3 Grease gun with a history as far back as 1942. It was put into service int 1944 and then the later variant the M3A1 was used in the Korean War. Also make sure to watch my Table top Video for it for specifications and details along with more close up video.

Getting back to the Field Test Review for the Umarex Legends CO2 Blowback Full Auto M3 Grease Gun, as always I like to test each gun out in the Replace Airguns Indoor Sea Can Airguns Range first placing 5 rounds through my Chronograph to find out the real world velocity of each test gun, then I shoot 10 rounds in semi auto at a distance of 30 feet onto a paper target to see how tight of a grouping I can get shooting from a seated and rested position. With full auto Airguns I like to then perform a full auto shooting test to see how it groups in full auto as often times the full auto grouping will open up somewhat as some Blowback Full Auto Airguns do tend to move around a lot more in full auto mode.

For my Power or Velocity test I was using dual brand new CO2 cartages. Umarex does state that the Umarex Legends CO2 Blowback Full Auto M3 Grease Gun will shoot around 450 fps and with my 5 shot test I was able to confirm this and get close to this mark averaging 436fps. The temperature in the Sea Can was around 20 degrees Celsius or around 70 degrees Fahrenheit. Perhaps in warmer conditions I might hit the claimed 450 fps but I was close either way.

For my accuracy test I setup a new paper target 30 feet downrange and proceeded to place 10 shots into it using the peep sight on the Umarex Legends CO2 Blowback Full Auto M3 Grease Gun. I was fairly pleased with a fairly tight 1.5 inch grouping in semi auto. I then switched over to full auto fun mode and with the remaining BB’s I unloaded 50 or so rounds in very short order and as expected the grouping opened up to closer to a 4 inch grouping. This was kind of expected since the Umarex Legends CO2 Blowback Full Auto M3 Grease Gun uses an open bolt system which has a fairly heavy bolt which makes the blowback action more intense, similar to the KWC Mini Uzi but to a lessor degree.

Any time a company puts out another Full Auto Replica Rifle, especially full auto firing, I am 100% in on it. Both Crosman and Umarex have done a great job doing this and the Umarex Legends CO2 Blowback Full Auto M3 Grease Gun is another example of a well thought out and what I expect to be very popular Full Auto BB Rifle. Their Legends series encompasses guns of the later era which I personally really like since they are harder to come by in their real steel versions, so having them available in an easier to acquire version that you can even shoot in your back yard is a win win for everyone. I am also happy to confirm the high capacity double stack 60 round magazine seemed to feed pretty good for me only miss-feeding once during my testing while doing the Chronograph portion but it got back on track right away. If you’re into Full Auto Legendary Airguns then for sure pick one up from us!

Categories: 4.5mm / .177 cal, BB, Blowback, CO2, Field Test, Full Auto, Review, Rifle, Semi Auto, Vimeo Video Tags: Umarex, Legends M3 Grease Gun, M3 Grease Gun

KWC DE L6 Desert Eagle CO2 Blowback Full Auto Airsoft Pistol Field Test Review

No Comments

In this Field Test Shooting Video I give the KWC DE L6 Desert Eagle CO2 Blowback Full Auto Airsoft Pistol my usual Indoor Sea Can shooting field test using my Chronograph to see what the average 5 shot velocity is with .20 gram plastic Airsoft BB’s. I then shoot 10 rounds in semi auto at a paper target setup 30 feet down range using a seated shooting position with my hands rested on a sand bag up front for stability to find out what the accuracy is in semi auto mode. I follow this up with a full mag demo in full auto to see how large of a spread we get with this gun jumping around. If you want information on specifications and details along with some close up video of the Cybergun Licensed L6 .50AE Desert Eagle GBB Airsoft Pistol then watch my Table Top Video for it here.

Starting off with my Chronograph test, the KWC DE L6 Desert Eagle CO2 Blowback Full Auto Airsoft Pistol was able to get a 5 shot average of 392 fps with the fasters round hitting 400 fps and the slowest Airsoft BB recording 387 fps. Again I was using .20 gram Airsoft BB’s and the indoor temperature was around 20 degrees Celsius which is close to 70 degree Fahrenheit for reference so so the KWC DE L6 Desert Eagle CO2 Blowback Full Auto Airsoft Pistol performed even better than the claimed on the box 380 fps.

Moving on to the accuracy portion of my Field Test Test for the KWC DE L6 Desert Eagle CO2 Blowback Full Auto Airsoft Pistol, I carefully placed 10 rounds into my fresh paper target and was a bit dissapoitned in the rather spread out group I got. I feel like this is because of the high fps and lighter choice of Airosft BB I used for this test. When shooting a gun with higher fps it is best to use heavier Airsoft BB’s at least when it comes to accuracy as they won’t get that beach ball effect of floating around so much. I did also shoot the KWC DE L6 Desert Eagle CO2 Blowback Full Auto Airsoft Pistol in Full auto which does rock around a lot because of the heavy blowback recoil and as expected BB’s kind of went all over but if I was shooting at a human sized target from that range I am sure most rounds would have found their intended target.

Overall the KWC DE L6 Desert Eagle CO2 Blowback Full Auto Airsoft Pistol is a really nice Airsoft pistol. I love the way it looks and feels to hold in the hand and the blowback operation is very noticeable. It also shoots really hard for an Airsoft Pistol and other than the semi auto accuracy which may be corrected using heavier BB’s, it really does have a lot going for it. I may have to test it out again using heavier Airsoft BB’s to see if this improves accuracy for me at 30 feet out.

Categories: 6mm, Airsoft, Blowback, CO2, Field Test, Full Auto, Pistol, Review, Semi Auto, Vimeo Video Tags: KWC, Desert Eagle, Desert Eagle L6

KWC DE L6 Desert Eagle CO2 Blowback Full Auto Airsoft Pistol Table Top Review

No Comments

Type: Airsoft Pistol.
Manufacturer: KWC.
Model: DE L6 Desert Eagle.
Materials: Metal & plastic.
Weight: 2.5 pounds (1100 grams).
Barrel Length: 5.1 inches (Smooth bore).
Total Length: 10.75 inches.
Propulsion: CO2.
Action: Blowback semi & full auto, single action only.
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 21 rounds.
FPS: 360fps claimed.

Trigger Pull: The trigger pull on the KWC DE L6 Desert Eagle CO2 Blowback Full Auto Airsoft Pistol is single action only which means you will need to rack the slide to not only draw the hammer back but to also chamber the first round. After that the blowback action will do this for you until you are out of ammo and then the slide will lock back. You can also manually draw the hammer back if a round is already chambered. The trigger itself is really nice, it’s light, super short with a crisp light release perfect for fast action shooting.

Accuracy: At this point I have not made my Field Test Shooting portion of my review for the KWC DE L6 Desert Eagle CO2 Blowback Full Auto Airsoft Pistol so I really don’t know what to expect? KWC claims an fps of 360 using CO2 as its power source and it is a realistic velocity based on previous Velocity tests with similar KWC Airsoft Guns. In terms of accuracy, again I have no idea since I have not reviewed this version of Desert Eagle before. So stay posted till next week when I make the Field Test Shooting Review for it.

Build Quality: Overall the metal and plastic build quality of the KWC DE L6 Desert Eagle CO2 Blowback Full Auto Airsoft Pistol is good. It is mostly metal with a plastic frame, the real steel version would have an aluminum frame and has a weight closer to 4 pounds total so a bit lighter in terms of weight compared to the powder burning version. The fit and finishes look good.

Realism: The KWC DE L6 Desert Eagle CO2 Blowback Full Auto Airsoft Pistol is an excellent Replica Airsoft version of the real steel L6 Desert Eagle including the top and bottom rails and the ported front barrel. It also has full blowback action and you can fully field strip it. I like the addition of the fingered grips which I think adds ot the overall looks and function of this Airsoft Pistol.

Pros:

  • Lots of metal and good overall weight to it.

  • Very accurate replica of Desert Eagle L6.

  • Ergonomic rubberized grips.

  • Semi and full auto selectable.

  • Adjustable hop-up.

  • No orange tip.

  • CO2 for more power over GBB.

  • Uses standard KWC CO2 Desert Eagle magazines.

  • Picatinny rail top and bottom for lots of accessory mounting options.

  • Great light weight single action only trigger with super short take-up.

Cons:

  • Frame is plastic so compared to real steel version is much lighter.

  • Non adjustable sights, also all black so may be hard to see on darker targets.

  • No trademarks since non-licensed version via KWC direct.

  • Very large gun with large grips so not suitable for smaller handed shooters.

Comments:
Going off just the looks and feel for the KWC DE L6 Desert Eagle CO2 Blowback Full Auto Airsoft Pistol I can say for sure I do like it compared ot the standard KWC Desert Eagle with its venting up front and its ergonomic rubberized grips. I hope when I perform the Field Test Shooting Video fo fit it it performs well as the price point is good at around $200 Canadian and who doesn't want to have a Desert Eagle in their Replica Airgun collection at the end of the day!

My Table Top Video of the KWC DE L6 Desert Eagle CO2 Blowback Full Auto Airsoft Pistol:

Categories: 6mm, Airsoft, Blowback, CO2, Comparison, Full Auto, Pistol, Review, Semi Auto, Vimeo Video Tags: KWC, Desert Eagle, Desert Eagle L6

Umarex Legends CO2 Blowback Full Auto M3 Grease Gun Table Top Review

1 Comment

Type: BB Rifle.
Manufacturer: Umarex.
Model: Legends M3 Grease Gun
Materials: Mostly All Metal Construction.
Weight: 7.7 pounds (3.5 kilograms).
Length: 29.8 inches (757mm).
Barrel Length: 8 inches (20 cm) smoothbore barrel.
Propulsion: Dual CO2 Cartridge.
Action: Semi & Full Auto Open Bolt Blowback
Ammunition Type: 4.5mm steel BB's.
Ammunition Capacity: 60 rounds.
FPS: 460fps.
Rate of Fire: 1050

Trigger Pull: The trigger pull on the Umarex Legends M3 Grease Gun is fairly light being a single action only trigger. You will have to open the bolt (pull it to the rear) which is located under the dust cover using your thumb but the recoil spring is not super heavy on the Airgun version. I would imagine this would take more effort on the real steel version.

Accuracy: I have not Field Test Reviewed the CO2 BB Full Auto Umarex Legends M3 Grease Gun as of yet but will be making a full Fields Test Review next week to find out what to expect in terms of accuracy on both semi and full auto modes along with velocity using brand new twin CO2 Cartridges.

Build Quality: The Umarex Legends BB Grease Gun is really made with form what I can see is an all metal construction at least on the outside. The fit and finishes feel and look really good and it has a nice balance and weight to it.

Realism: The Umarex Legends BB Firing M3 Grease Gun is based on the actual M3A1 version and looks just like it including the rough welds and simple build. Even the action is Open Bolt which means you have to pull the bolt back using your thumb or finger, then when you release the trigger the bolt moves forward loading a round in the chamber and then acting like the firing pin and firing the gun which in turn uses the pressure to cycle the bolt into the rear position ready to fire the next shot in either semi or full auto mode.

Pros:

  • Yet another Classic Legends Replica Airgun from Umarex.

  • Virtually all metal design with good overall weight.

  • Price is very reasonable for all metal replica machine gun in an all metal construction.

  • Semi and Full auto select-ability.

  • Dual CO2 design for increased shots and less cool down effect.

  • Super high capacity 60 round full size drop out metal magazine. (hopefully it works well)

  • Great looking replica of the real steel Grease Gun in looks, operation and feel.

  • Internal bolt blowback will give a bit of recoil feedback feel.

  • Uses a genuine open bolt system.

  • Recessed barrel for added realism.

Cons:

  • Sights are non-adjustable.

  • Hopefully high capacity magazine feeds consistently?

  • Selector switch under frame is not authentic but does allow for semi, full auto and safe modes.

Comments:

The Umarex Legends M3 Grease Gun is yet another great addition to not only the Legends Series of Umarex Airguns but also their Full Auto BB Rifle lineup! I am hoping the 60 round magazine feeds properly as double\ stack 4.5mm BB Rounds don’t always feed as well as Airsoft BB’s do. I guess we will find out when I make my Filed Test Shooting Video… That said the M3 Grease Gun is an excellent Replica of the real steel version with an all metal build and even a true to form open bolt blowback system. I really hope it performs well so I can recommend this Airgun, on first impressions and simply holding and looking around this BB Machine gun I am impressed so far.

My Table Top Video of the Umarex Legends Full Auto M3 Grease Gun:

Categories: 4.5mm / .177 cal, BB, Blowback, CO2, Full Auto, Review, Rifle, Semi Auto, Vimeo Video Tags: Umarex, Legends M3 Grease Gun

Umarex Grease Gun - NXG Pump Shotgun - KWC DE L6 Preview Unboxing

No Comments

In this Preview Unboxing Video I take a look at three new products just listed in our Replica Airguns Store. Two are products from Umarex both being CO2 4.5mm Steel BB and one is a CO2 powered KWC Blowback Airsoft Pistol. I don’t go into a ton of detail in this video but go over what is listed on the box and a quick walk around of each product.

First up I show off the KWC DE L6 CO2 Blowback Airsoft Pistol, it is much like the Cybergun Desert Eagle L6 I reviewed but without the orange tip and with notched pistol grips, also all back which is classic and looks great. This Blowback pistol shoots 6mm Airsoft BB’s at around 360 fps and has a full size dropout metal magazine that holds the CO2 along with 21 rounds.

Next I showcase a rather entry level 4.5mm CO2 BB Pump Action Rifle called the Umarex NXG Pump Shot that is a mostly plastic lighter weight build perfect for smaller or younger shooters. It uses CO2, shoots 4.5mm Steel BB’s and comes with a drop out 10 round rotary magazine. You will have to pump it before each shot but this makes the trigger fairly light.

Lastly but perhaps my favorite in this lineup I take a look at the CO2 4.5mm Blowback Umarex Legends M3 Grease Gun. Just like the real steel .45 caliber Grease Gun it is capable of full auto and also shoots in semi auto. You will find a full size drop out metal magazine that holds two CO2 cartridges along with 60 4.5mm steel BB’s. Thats a lot of rounds!

All of these Airguns in our Canada Replica Airguns Store and some in the US Replica Airguns Store.

Categories: 4.5mm / .177 cal, 6mm, Airsoft, BB, Blowback, CO2, Full Auto, Pistol, Review, Rifle, Semi Auto, Vimeo Video Tags: Umarex, KWC, NXG Pump Shot, M3 Grease Gun, Legends M3 Grease Gun, Desert Eagle, DE L6, Desert Eagle L6

Where Have I Been Update?

No Comments

This video is primarily for my viewers over on the Replica Airguns channels as I have not posted anything about what's been going on with me the last month and a bit. My Airgun channel does not have very much personal content like my GetFitOver40 channel does, so I wanted to fill them in on where I have been and what's been going on.

In this video I talk about being in the hospital for a month because I was experiencing shortness of breath and a feeling of pressure in my diaphragm area which was later found out to be a heart problem.

Unknown to me I had been born with a Congenital Heart Defect where my Aortic Valve was defective which over time had cause the Aortic Root area to double in size (3cm normal to 6cm).

This defect caused my heart to work a lot harder then normal making it enlarge over time which is not good and reduces it's pumping ability. Before my operation my heart function was below 20%, a normal healthy heart is around 60%.

While in the hospital I had open heart surgery on my Aortic valve replacing it along with a section above it. I also had a Pacemaker/Defibrillator put in. There where a lot of concerns because my heart was also enlarged and not functioning that well, the doctor even said they may not be able to get me off of bypass which would then require an emergency heart transplant. The good news is the operation went well and no need for a new heart at least for now...

I was in the hospital for longer than normal because of my enlarged heart and because of all the stress to it. I was in and out of what's called Atrial Fibrillation. This is when the heart beats very irregularly and faster than normal. It can be short term or longer term and can sort itself out or require intervention to help get back to a Sinus Rhythm. At the time of this post I believe it has gone back to the normal Sinus Rhythm, so fingers crossed it stays this way.

As you can imagine, this has been a life changing event and means my lifestyle will be changing a bit. I will not be doing anything to overstress my heart but that does not mean no more fitness for me, just a different fitness approach. Perhaps a more scaled back approach but I am always up for a challenge and this is no different in terms of how I would approach any challenge in my life.

So if you are a Replica Airguns follower and want to follow my "Road to Recovery" you can do that over on my GetFitOver40 channels. Other than that I will be making regular Airgun Videos moving forward now that I am at home.

Categories: Non Airguns, Replica Airguns News, Vimeo Video Tags:

Crosman R1 Fallen Patriots Blowback CO2 Full Auto BB Rifle Field Test Review

No Comments

If you are wondering why I am doing another Field Test of a Crosman AR-15 type CO2 Full Auto BB Rifle… Well why not, any excuse to play around with one of these and I will take it. You never know, even though the Crosman R1 Fallen Patriots Blowback CO2 Full Auto BB Rifle is essentially just a re-skinned R1, what if it performs better or worse than the standard R1. I better test it out and find out for myself.

Like all my other Field Test Shooting Videos I test out the Velocity and Accuracy in the Replica Airguns Indoors Sea Can Shooting Range where I can control the temperature, wind and lighting conditions. The goal is to see if the velocity is what the manufacturer claims and what kind of groupings I can get in this case shooting 10 rounds in semi auto and the rest in full auto.

Starting with my velocity test for the Crosman R1 Fallen Patriots Blowback CO2 Full Auto BB Rifle I shot five 4.5mm Steel BB’s through my Chronograph and was able to average 389 fps. Crosman claims a max fps of 430 which would be best case scenario in what would most likely be fairly warm shooting conditions. During my testing the temperature was not overly warm or cool, right around room temperature so around 20 degrees Celsius (70 ish degrees Fahrenheit) and I was using dual brand new CO2 Cartridges.

Next I tested out the accuracy for the Crosman R1 Fallen Patriots Blowback CO2 Full Auto BB Rifle first shooting 10 rounds in semi auto and then dumping the rest of the magazine in full auto. Right out of the box using the iron pop-up sights I was able to get all but 1 shot in the Bulls-eye which is about 1 inch in diameter so not only is the Crosman R1 Fallen Patriots Blowback CO2 Full Auto BB Rifle very accurate but it was really well centered out of the box in my case. Switching over to full auto the grouping spread out as expected more to around 2+ inches and placing a bit lower on the target but this is expected when shooting a blowback Airgun in full auto as it will move around a bit.

I do have to say the Crosman R1 Fallen Patriots Blowback CO2 Full Auto BB Rifle is probably one of the best looking AR’s in the Crosman series of Full Auto BB Rifles and I am happy to report the performance was as expected since I have done several Field Test Shooting Reviews for this series of BB Rifles. No you do not get a red dot with the Crosman R1 Fallen Patriots Blowback CO2 Full Auto BB Rifle but rather more old school iron sights but it really suits this BB Machine Gun and for me it didn’t hurt performance at all!

Categories: 4.5mm / .177 cal, BB, Blowback, CO2, Field Test, Full Auto, Review, Rifle, Semi Auto, Vimeo Video Tags: Crosman R1, Crosman, Fallen Patriots

BARRA 400e AEG Full Auto BB Rifle Field Test Review

No Comments

In this Field Test Shooting Video I test out the BARRA 400e Full Auto AEG 4.5mm BB Rifle to test out the velocity along with the accuracy and also get an idea on what the rate of fire is in Full Auto mode as on the box it claims 550 rounds per minute using what I would assume is a 7.4 volt battery. I wanted to test the BARRA 400e using an 11.1 volt battery but mine died on me. I will more than likely make a short video where I test out the 11.1 volt battery to see how this effects the rate of fire. If you want more information on specifications and details for the BARRA 400e then check my Table Table Video for it here.

Starting with testing out the Velocity for the BARRA 400e Full Auto AEG 4.5mm BB Rifle I shoot 6 rounds through my Chronograph to average out the fps and I was able to average 385 fps which is fairly close to the claimed 410 fps. Temperature does not effect an AEG as no CO2 is being used. Battery voltage also does not effect velocity as long as there is enough voltage to make the AEG motor pull the spring all the way back. Only trigger delay and rounds per minute are effected by battery voltage.

Moving on to my accuracy findings, I loaded up a full 50 round magazine and first unloaded 10 rounds fairly quickly into my paper target setup 30 feet down range shooting from a seated shooting position with the BARRA 400e resting on a sand bag up front. I was impressed to get close to a 1 inch 10 round grouping that placed just a little to the left and down from the bullseye right out of the box. I could easily center the sights as they are fully adjustable. I then switched the BARRA 400e Full Auto AEG 4.5mm BB Rifle to full auto and shot the remaining 40 or so rounds into the same paper target and even though the grouping opened up a little bit, it was not by much so accuracy in semi and full auto is very good with the BARRA 400e.

I have to say the rate of fire on the BARRA 400e Full Auto AEG 4.5mm BB Rifle using a 7.4 volt battery is rather slow even compared to other Airsoft AEG Full Auto Airguns but I still yet have to test it out using a brand new 11.1 volt Lithium battery so I do expect the rate of fire to improve a noticeable amount. Stay posted for that update video. Even with the slower rate of fire from the BARRA 400e this gun is awesome, it is really accurate and the velocity stays super consistent since CO2 cool down is not a factor. The mostly all metal construction and overall quality is very good and the fact that this is really the first commercial AEG 4.5mm Steel BB Rifle makes that alone a great reason to pick one up.

Categories: AEG, BB, Field Test, Full Auto Fun, Review, Rifle, Semi Auto, Vimeo Video Tags: Barra, Barra 400e