In this Comparison Video I show several models of Glock Replica Airguns distributed under the Umarex/Glock license. Umarex has brought to market several Glock Replica Airguns to date including BB, Pellet, Airsoft and even Paintball versions in a variety of models. I showcase only a few of these models in this video but it is a good selection to give most people an idea of what is available from our Replica Airguns website in terms of Glock Pistols.
I have made a fair amount of video reviews for the Dan Wesson Line of AIrguns that encompass Table Top and Field Test Reviews on several versions of the Dan Wesson line: BB, Pellet, Airsoft, in a variety of barrel and color choices. It has been a while, so why not make another Review Video to revisit the Dan Wesson Line and so this time here we have the Steel BB version in a 2.5 inch barrel length. As always I will test they CO2 Revolver to find out what the velocity is and how accurate it is shooting at a paper target. Also make sure to watch my Table Top Video for specifications, details and closeup video.
Here we go with the Velocity test! I placed a brand new CO2 in the ASG Dan Wesson 2.5 inch Gold CO2 BB Revolver and shot a cylinder full of 4.5mm steel BB’s that weigh 5.1 grain through my Chronograph. The temperature was average so about room temperature. Only the last 4 of my shots registered on my Chronograph as it was acting up a bit on me at first two shots but I did manage to average 332 fps with the last four. The first two shots would have been a little bit faster had they registered on my chronograph so this may have brought up the average a bit to say around 334…
I then placed a fresh paper target 30 feet down range and proceeded to unload a full 6 round cylinder into it, I was shooting in single action with the hammer cocked back between shots. I was also using a semi rested shooting position with my hands resting on a sand bag up front and seated in the back for stability. Generally speaking even with Steel BB’s I can get close to a 1-2 inch grouping with hess Dan Wessons but this time my 6 shot grouping only produced a 3 inch group? It was probably me as there is always some human error involved and each test can result in different results so keep that in mind. The grouping was well centered out of the box but the ASG Dan Wesson 2.5 inch Gold CO2 BB Revolver does have fully adjustable sights in case yours is a bit off.
It never get’s old loading up the shells with ammo and placing them in the cylinder followed by either quick action shooting or more relaxed and accurate single action shooting, then repeating again and again… The original Dan Wesson line of revelers has been around for a long time now and if I am not mistaken was the first Airgun revolver to use reloadable shells. We now have more refined 715 version of the Dan Wesson which does have some improvement but the original versions still hold strong and are very capable and fun shell loading revolvers that come it a bit lower price tag then the newer 715 versions so no matter which version you get you will have lot of fun shooting and reloading these enjoyable Airguns!
Type: BB Revolvers. Manufacturer: ASG Model: Dan Wesson 2.5 inch Gold Materials: Mostly metal. Weight: 1.9 pounds. (862 grams) Barrel: Metal non-rifled. Propulsion: CO2 x 1. Action: Revolver, single and double action. Ammunition Type: 4.5mm Steel BB's. Ammunition Capacity: 6 rounds (removable shells). FPS: 327
Trigger Pull: The ASG Dan Wesson 2.5 inch Gold CO2 BB Revolver shoots in true modern revolver style offering single and double action. The double action has a bit of friction to it since the cylinder is being rotate during the first part of the trigger pull and there is a spring fed metal gasket between the barrel and the cylinder that creates a seal but does add some resistance to the trigger pull in double action. Single action is much lighter as expected since pulling the hammer back turns the cylinder removing that friction point from the equasion.
.Accuracy: So far I have not done my Filed Test Shooting Video for the ASG Dan Wesson 2.5 inch Gold CO2 BB Revolver, but I plan to in the near future as a revisit since I have made a lot of similar Field Test Videos for the Dan Wesson line of products in 4.5mm Steel BB and 6mm Airsoft, here is a link to me shooting the 8 inch a while back in my old setup. Wow, this one goes back to 2014 almost 10 years ago!
Build Quality: The ASG Dan Wesson 2.5 inch Gold CO2 BB Revolver overall is really well built with good weight to it and a nice fit and finish, I do like the Gold version in this 2.5 inch version. It is almost all metal with the exception of the grips which are made of a semi hard plastic. One beef I have with the original ASG Dan Wesson line of revolvers are how the grips slide back to access the CO2, closing them can be a bit of a chore as they can come off their track super easily. The other complaint I hear about them is the play in the trigger and hammer side to side.
Realism: The ASG Dan Wesson 2.5 inch Gold CO2 BB Revolver like all the other ASG Dan Wesson Revolvers is very realistic with its realistic pop out cylinder and 6 removable shells you can reuse and load up for numerous rounds of shooting. You can also buy additional shells and have them preloaded and ready to go in the Speed loader to speed things up. Two things about the ASG Dan Wesson 2.5 inch Gold CO2 BB Revolver that take away a bit from the realism would be the non recessed barrel and the rather large space in front of the hammer. A real steel Dan Wesson or even most revolvers do not have this large space. I believe they did this to allow for the internal valve system. The newer Dan Wesson 715 however was designed with a smaller space in front of the hammer.
Pros:
It's a revolver with actual shells! Gives you the feeling of a real 6 shooter.
Almost all metal design with good weight and feel.
Lots of detail in this gun, very well made, fit and finish is very good.
Good power and good accuracy. (going off of already done older reviews)
Fully adjustable rear sight for windage and elevation.
Can add the included accessory rail for more options (optical or red dot sight…).
Dan Wesson licensed via ASG.
Gold finish is unique. (Gold is the Best!)
Moulded and textured pistol grips.
Grips fully hide CO2 screw.
Can shoot in both double and single action for action shooting or more accurate shot placement.
Cons:
Plastic CO2 screw tab.
Plastic grip setup can be a bit awkward to close.
2.5 inch does not have the recessed barrel.
Hammer and trigger are a bit sloppy compared to 715 version.
Comments:
It’s been a while since I reviewed one of the first generation ASG Dan Wesson Revolvers and the ASG Dan Wesson 2.5 inch Gold CO2 BB Revolver does bring back some memories for me going back almost a decade. If I’m not mistaken this revolver was the first one to implement actual removable and reloadable shells making Airgun Replica Revolvers a lot more interesting and realistic! I do kind of prefer the newer 715 version as they are even beefier than the original ASG Dan Wessons and ASG has fixed the sloppy hammer and trigger along with the space in front of the hammer has been reduce making the 715 even that much more realistic.
Watch my Vimeo Video Table Top Review for the Dan Wesson 2.5 Inch Gold BB Revolver:
In this Preview Review Video I take a look at 4 newer products now in our Replica Airguns Online Store. One is a 4.5mm Steel BB Revolver, two are 6mm Airsoft Pistols and one is a .68 caliber Paintball Shotgun.
The first item I take look at in this video is the Umarex HK30 AEG Airsoft Pistol, this product is pretty entry level with analyst all plastic build and is very light to hold. It does however shoot in both semi and full auto since it is an AEG Airsfto Pistol (not many of them out there). The fps is rather low at a claimed fps at just under 200, the Umarex HK30 AEG Airsoft Pistol also comes with two 16 round remove; plastic magazines. Who knows, maybe it will be fun?
Next I take a look at the ASG Dan Wesson 2.5 inch 4.5mm Steel BB Gold Revolver. This is a CO2 powered shell loading BB revolver very much like similar ones I have reviewed in the past but in Gold finish. Will the gold finishes make it perform better, well I guess we better find out!
I then take a look at a “Glock Like” CO2 Blowback Airsoft Pistol for KJWorks called the KP13. It has a full size drop out metal magazine that holds the CO2 along with 24 rounds of 6mm Airsoft BB’s. The KJWorks KP-13 has a metal slide, metal magazine and polymer frame with a velocity over 360fps using the included barrel extension.
Last but perhaps the most interesting for me is the Umarex T4E HDB which is a lower cost Paintball/Rubber Ball Shotgun which could possibly be used for home protection? The T4E HDB is a mostly plastic constructed rifle with decent weight to it and uses an internal spring fed 16 round magazine. You will find all kinds of mounting points for accessories and for a sling on the Umarex T4E HDB and again at much lower cost than similar T4E rifle based Paintball/Rubber ball Airguns.
Sights for guns in general are the same for Airguns as is with real steel guns for the most part and can be mixed and matched with a couple of exceptions. Spring piston rifles for instance are an exception because of the unique vibration the spring makes and how it can damage a standard optical sight, so in this case you’re best to use an optical sight designed for a spring piston Airgun. In most other cases sights can be used on all types of guns.
In this Airgun Sights video I will go over the various types of sights that either come as part of the gun design or can be added afterwards using a rail or mounting system.
Types of Airgun Sights most commonly used.
Iron Sight (Fixed or removable).
Iron Sight (Adjustable).
Iron Sight (White Dot, Fiber Optic).
Come in Post/Notch, Post/Aperture (Peep).
Common on Pistols and Rifles
Laser Sight:
Generally added to a rail or can sometime be integrated into the design of the gun.
Common on both Pistols and Rifles.
Red DotandHolographic:
Generally not magnified.
Most common on Rifles but can be used on Pistols.
Optical Magnified (Telescopic)
Come in a variety of magnifications for different shooting ranges.
I sometimes mention in my review videos that a gun is either Full Blowback or Partial Blowback and some people may not understand exactly what this means and how it effects the Airguns Blowback Action and Performance so I figured it would be best to make a dedicated video talking about the differences and also some of the Pro’s and Con’s of each type of Blowback Action.
In the video I obviously go into a fair amount of detail and show you around each type of Airgun and Magazine as they do differ a fair amount but to summaries for you here in this written form, the main difference is going to be how much the slide moves back and forth. With Full Blowback Airguns the slide will move much longer back and forth on the frame of the Airgun much like a real gun does and the slide Catch/Lock generally locks back further too. With a Partial Blowback Airgun the slide generally has a shorter range of movement back and forth on the frame with the slide locks usually about half of the distance compared to a Full Blowback Airgun.
The magazines are also very different as a Full Blowbacks Airgun generally has a partially exposed BB which is pushed into the barrel by the nozzle with each slide cycle. With a Partial Blowback Airgun the BB is generally not exposed and either the trigger action or simply the CO2 force is required to transfer the BB in the breach of the Airgun.
Another point to mention is that Full Blowback Airguns tend to use more CO2 and have a slightly lower velocity as compared to Partial Blowback Airguns but this is not a rule.
There are many types of magazines used in Airguns and some of this is dependent on the ammunition used.
For instance a stacked type of magazine often used for Steel BB and Airsoft can not be used for Pellets as pellets tend to deform when stacked in such a way since there is no metal casting protecting them from mashing into each other.
So what type of magazines do we generally see in Airguns? The most common Airgun magazines are as follows:
Simple Stick Magazine
Mostly used with Steel BB but also found in some Airsoft Airguns.
Some Pellet Airguns use a type of stick magazine with a rotary magazine on each end.
Used in non-blowback and blowback Airguns.
Can be made from plastic or steel or a combination of both materials.
Full Size Drop Out Magazine
Used with Steel BB and Airsoft guns.
Generally you will find these types magazines hold both the BB’s and CO2.
Used in non-blowback and blowback Airguns.
Commonly used with Airsoft Rifles in mid to high capacity.
Can be made from plastic or steel or a combination of both materials.
Rotary magazine
Used with Steel BB, Airsoft and Pellet Airguns.
Used in non-blowback and blowback Airguns.
Can be made from plastic or steel.
Can often use mixed ammo types as in both 4.5mm Steel BB and .177 caliber pellet.
Belt Fed Magazine
Like rotary magazine belt fed magazine can accommodate Steel BB, Pellet and Airsoft but are most often used with Pellet Airguns.
Usually found in a full size magazine that also holds the CO2.
Used in non-blowback and blowback Airguns.
Can be made from plastic or steel or a combination of both materials.
Internal Magazine
Used with Steel BB, Airsoft.
Can have a hopper built in hat feeds a spring fed magazine.
Usually found in lesser expensive Airguns but not a rule.
In this Video I go through each type of Airgun Magazine and talk about their differences and uses.
I have another Full Auto Fun Video this one focusing on 4.5mm Steel BB Versus 6mm Plastic and which one is better in terms of accuracy and shredding power. I perform this super scientific test by shooting obviously in full auto two comparable Steel BB and Plastic Airsoft Rifles at a paper target setup 20 feet away with a magazine as a backer so I can see what the accuracy is like and how much of the paper magazine gets shredded by each ammo being tested.
I have split this video into three separate videos, in video one I compare two similar AR styled rifles, a CO2 powered Blowback 4.5mm BB Rifle to a Gas Blowback 6mm Airsoft Rifle. In video two I compare two AK type Blowback Rifles to each otters, again a CO2 4.5mm Steel BB along with a Gas 6mm Airsoft.
And lastly in Video three I compare my top picks for each category which include a non-Blowback CO2 4.5mm BB Machine gun to an AEG 6mm Airsoft Rifle.
I have another Full Auto Fun Video this one focusing on 4.5mm Steel BB Versus 6mm Plastic and which one is better in terms of accuracy and shredding power. I perform this super scientific test by shooting obviously in full auto two comparable Steel BB and Plastic Airsoft Rifles at a paper target setup 20 feet away with a magazine as a backer so I can see what the accuracy is like and how much of the paper magazine gets shredded by each ammo being tested.
I have split this video into three separate videos, in video one I compare two similar AR styled rifles, a CO2 powered Blowback 4.5mm BB Rifle to a Gas Blowback 6mm Airsoft Rifle. In video two I compare two AK type Blowback Rifles to each otters, again a CO2 4.5mm Steel BB along with a Gas 6mm Airsoft.
And lastly in Video three I compare my top picks for each category which include a non-Blowback CO2 4.5mm BB Machine gun to an AEG 6mm Airsoft Rifle.
For this Video 2 Accuracy Test I shoot all of the above listed Airguns at a paper target setup 30 feet down range using a semi rested shooting position with my hands resting on a sand bag up front and seated on a stool in the back. It’s not perfect but works well enough. I didn’t take a ton of time with each gun since there where 4 to shoot in this Field Test Shooting Video so accuracy may have been a bit better if I took a little more time with each gun.
In Video 2 I test the power and penetration of each Airgun option shooting at a pop can, a soup can and a toilet paper roll so make sure to watch that video if you have not already watched it.
For this Video 1 Power Test I shoot all of the above listed Airguns first at a pop can, then a soup can and then a toilet paper roll. The ides is to test penetration abilities with the pop and soup can and then raw force shooting the toilet paper as it will absorb all the energy from each airgun round and by gauging how much the toilet paper reacts or moves it should tell us which airgun has the most raw power or energy.
In Video 2 I will be testing accuracy using my standard 30 round paper target setup in the Replica Airguns Sea Can so stay posted for that upcoming video shortly…
Type:Airsoft Rifle. Manufacturer: Tokyo Marui. Model:CQBR Block1. Materials: Metal and Polymer. Weight: 9.97 pounds (4.52kg). Barrel: 9.84 inches (250mm). Propulsion: Gas Blowback. Action: Semi & Full Auto - SAO trigger. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: 35 Max FPS: 350 Tested (.20 gram).
Trigger Pull: The trigger on the Tokyo Marui CQBR Block1 GBB Airsoft Rifle is single action only so the charging handle will need to be engaged on your first shot un less the bolt is already back for a preview empty magazine and reload. The trigger is light and short with virtual no makeup but then just a bit of creep before releasing the internal striker and firing a round.
Accuracy: I did already perform my Field Test Shooting Video for the Tokyo Marui CQBR Block1 GBB Airsoft Rifle so I do have some information to share relating to the shooting abilities of this Gas Blowback Airsoft Rifle. During my Velocity Chronograph Test I was able to average 332 fps using .20 gram Airsfot BB’s with my highest velocity shot hitting 350 fps. My 10 shot grouping at 30 feet away yielded a 1.5 inch spread and when I placed the Tokyo Marui CQBR Block1 GBB Airsoft Rifle in full auto it did open up a fair amount since the blowback action really rocks this gun around a lot making full auto shooting spread out much monroe than semi auto shooting but still so much fun to shoot in full auto :). You can watch my full Field Test Shooting Video here!
Build Quality: The build quality of the Tokyo Marui CQBR Block1 GBB Airsoft Rifle is one of the highest out there with high quality metal parts throughout this GBB AIrsfot Rifle both inside and out. Some of the internals include a heavy duty 19mm blowback piston, New mechanism Z-system to prevent wear and tear of bolt catch, piston absorber and friction relief bolt roller to reduce the burden on internal parts due to bolt operation.
Realism: The Tokyo Marui CQBR Block1 GBB Airsoft Rifle is a near perfect replica of a Colt licensed AR 15 and Tokyo Marui has a ton of detail to the fit and finish including the unique and multiple finishes on the external parts: The rail hand guard, front sight, and stock reproduce the difference in FDE color tone applied to each part as in the real thing. The metal rail hand guard reproduces the color by alumite treatment with excellent scratch resistance. In addition, the upper / lower frame and bolts are made of Ceracoat, which has a strong coating film and excellent scratch resistance.
Pros:
Super high quality GBB Airsoft Rifle.
Bolt locks back for easy hop-up adjustments.
Very heavy blowback operation.
Lots of metal parts, mostly everything except the stock, fore grip and pistol grip.
Lots of mounting points with it’s quad rail setup.
Awesome internals: Heavy duty 19mm blowback piston, New mechanism Z-system to prevent wear and tear of bolt catch, piston absorber and friction relief bolt roller to reduce the burden on internal parts due to bolt operation.
Attention to detail goes beyond expectation! Color reproduction and special surface treatment is a good example of this.
Easy to mount a sling with it’s QD tactical sling mounts on handguard, lower receiver, and stock.
Adjustable hop-up as expected.
6 portion rear stock.
Removable and fully adjustable rear sight.
Great for close and mid range shooting situations with a 350 average fps using .20 gram BB’s.
Accuracy was good at 30 feet getting around a 1.5 inch 10 shot grouping.
Cons:
My magazine did not seem to seal very well in the nozzle area when filling with propane but mag seemed to fill OK, just seemed to waste a bit of gas while filling.
Heavy blowback makes full auto accuracy move around a fair amount.
Pretty much have sue the included magazine filling tube to load BB’s in the magazine sop will need ot be carried with you in a game.
On the very high end of the price spectrum.
Comments: I am a bit of a sucker for Blowback Airguns in general whether it be Pistol, Rifle, BB, Pellet, Paintball or Airsoft. So right out of the box I loved the Tokyo Marui CQBR Block1 GBB Airsoft Rifle with its heavy blowback recoil. All that aside the Tokyo Marui CQBR Block1 GBB Airsoft Rifle is one of the highest quality Gas Blowback AR 15 type Airsoft Rifles you will be able to get your hands on assuming if you can find it in stock. It is a near perfect Airsoft Replica of a real steel Colt AR with only the best finishes and parts available for such a GBB Rifle.
Starting with my velocity test, I placed 6 rounds through my Chronpgrah using .20 gram Airsoft BB’s with a fully gassed up magazine. The slowest shot was 332 fps while the fastest shot was 350 fps for a 6 shot average of 337 fps, the temperature was not overly warm in the Sea Can for this Field Test so I would imagine in a warmer shooting conditions the velocity would be a little bit higher.
Switch to my Accuracy test for the Tokyo Marui CQBR Block1 GBB Airsoft Rifle I set myself up using a rested seated shooting position with a sand bag up front for stability. My fresh paper target was 30 feet down range for this test. I was able to place 10 rounds in semi auto all within about 1.5 inches slightly high on the target but well centered left to right. This is just using out of the box already setup hop-up and sight adjustments. I then shot the remaining 25 rounds left in the magazine using several full auto bursts until the magazine was empty and as expected the grouping opened up more since this Gas Blowback Airsoft Rifle really does have some kick and does move around a fair bit.
I really enjoyed testing out the Tokyo Marui CQBR Block1 GBB Airsoft Rifle in the Replcai Airguns Sea Can Indoor Airgun Shooting Range. It performed exactly how I was hoping with mid range velocity and excellent accuracy in semi auto. If you are looking for one of the more realistic and higher quality GBB Airsoft AR-15 type Airsoft Rifles on the market you really can not go wrong with the Tokyo Marui CQBR Block1 GBB Airsoft Rifle as it checks all these boxes!
In this Preview Unboxing Video I take a look at three rifles, two are Airsoft Rifles and one is an Archery Rifle. Then First Airsoft Rifle form Tokyo Marui i s full Gas Blowback all metal build AR 15 of the highest quality and realism while the second Airsoft Rifle from Sig Sauer is an AEG but again a high quality product for sure. Lastly I take a look at Umarex’s lates Airsaber which now sports dual Arrow configuration for quick follow up shots. I do plan to make future more intensive table top and shooting videos for some if not all of thees Rifles but this video will at least wet your appetite a bit.
In this Field Test Review Shooting Video I take the G&G Piranha SL GBB Airsoft Pistol through its paces to find out what we can expect in terms of velocity and accuracy. I perform two main tests, the Chronograph Test where I shoot around 5 rounds and average them out to see what the real world fps is and then I shoot 10 rounds at a paper taggert setup 30 feet downrange to see how tight of a grouping I can achieve with the G&G Piranha SL GBB Airsoft Pistol. I don’t talk much about the specifications and details in this video so if you are interested in that information you can watch my Table Top Video for this Airsoft Pistol here.
Starting first with the Chronograph Velocity Test I loaded .20 gram Airsoft BB’s into both of the supplied magazines and filled them up with propane gas. Often times because the valves may be tuned just a bit differently, you can expect each magazine to shoot a slightly different velocities or fps. This was the case with the G&G Piranha SL GBB Airsoft Pistol as the shorter double stack 25 round magazine averaged 353 fps while the longer single stack 20 round magazine shot a 328 average fps. So 25 fps difference between the two.
Moving on to the accuracy portion of the test I was able to get close to a two inch grouping fairly well centered shooting at a fresh paper target setup 30 feet away from a rested shooting position with my hands on a sand bag up front and sitting in the back. I was having some problems with the shorter double stack 25 round magazine not chambering rounds consistently which meant I had to reset my shooting position many times but even so I was able to get close to a two inch grouping. I did load up a different 25 round magazine from another Piranha Airsoft Pistol I had around and this magazine shot perfectly without any chambering problems so there must be something not exactly right with the short magazine that came with my G&G Piranha SL.
Other than the feeding issue I had for the double stack 25 round short magazine that came with my G&G Piranha SL GBB Airsoft Pistol, the Airsoft gun performed well. It for sure made for an entertaining video spraying Airsoft BB’s all over the Sea Can and trying o figure out why the Airsoft Pisotl was not working as it should. Such is life and at the end of the day it was simply something going on with the one magazine which seemed ot have a problem releasing the Airsoft BB’s into the gas chamber. All that was needed was a new magazine and we where back in business!
In this Field Test Shooting Video I test out the KJWorks CZ P-09 GBB Airsoft Pistol in the Replica Airguns Indoor Sea Can Shooting Range to find out what the velocity and accuracy is using .20 gram Airsoft BB’s. If you’re more interested in details, specifications and close up video of the KJWorks CZ P-09 GBB Airsoft Pistol then make sure to watch my Table Top Video for that information.
Starting with the velocity test I averaged out 6 rounds using my chronograph to find out the fps velocity for the KJWorks CZ P-09 GBB Airsoft Pistol and I was able to get 279.5 fps, the slowest of the 6 shots was 279 with the fastest being 281 so actually fairly closer to each other. I do mention at the end of the video that it felt like the velocity was not consistent because the blowback action to me felt like it was heavier on some shots than others? I felt like this might effect accuracy in terms of elevations if the velocity was not consistent but it ended up not being a factor as far as I could tell.
For my accuracy test I loaded 10 rounds in the KJWorks CZ P-09 GBB Airsoft Pistol and proceeded to place them to the best of my ability into my paper target setup 30 feet down range using a rested and seated shooting position (Sand bag up front, seated on a stool in the back). Even though the grouping spread out to about 4 inches, all but one round stayed within about 2 inches and side to side the spread was closer to about 1.5 inches for all shots. In terms of placement on the target they where all fairly well centered out of the box.
The fps for the KJWorks CZ P-09 GBB Airsoft Pistol is a bit low using the preinstalled short internal barrel that does not allow for the added threaded barrel extension but you could install the short internal threaded barrel and add the external barrel extension to increase the fps to more in the range of 360+. That said you would have a fairly long brass inner barrel protruding from your gun with no way I can see to install a mock suppressor to hide it so it would not look so good this way and there is also the possibility of damaging the thin exposed external barrel. Overall the KJWorks CZ P-09 GBB Airsoft Pistol performed well but I feel needs a little bit of break in time to smooth out the blowback consistency but even as is it shot consistent fps and was able to get most rounds well placed on the center of the target.
Type: Gas Blowback Airsoft Pistol. Manufacturer: KJWorks Model: CZ P-09 Materials: Metal & Polymer. Weight: 2.3 pounds (1050 grams). Length: 9 inches (229mm) total. Barrel: 4.4 inches (120mm),Metal non-rifled smooth bore. (Comes with barrel extension) Propulsion: Green gas or propane. Action: Blowback, single and double action. Ammunition Type: 6mm plastic Airsoft BB's. Ammunition Capacity: 25rounds. FPS: 376 fps.
Trigger Pull: The trigger pull on the KJWorks CZ P-09 GBB Airsoft Pistol is good in both single and double action shooting modes. Most of the time you will be shooting in single action as the blowback action will do all the work cycling the slide and retracting the hammer allowing for light quick single action follow up shots. If you do decide to drop the hammer in-between shooting you can then pull the double action trigger which is much longer and a bit heavier but this will draw the hammer back and release the trigger as expected with single action shots to follow.
Accuracy: So far I have not made my Field Test Shooting Video for the KJWorks CZ P-09 GBB Airsoft Pistol but do expect it to behave much like the ASG distributed version of this same gun which by the way is also made by KJWorks. The only real difference to consider will be the gas used in both of these Airsoft guns as the ASG distributed version uses CO2 while the KJWorks version reviewed in this video uses Green Gas or Propane which will reduce the velocity a little bit. We will find out next week when I make my Field Test Shooting Video for the KJWorks CZ P-09 GBB Airsoft Pistol.
Build Quality: KJWorks is know for making high quality products and the KJWorks CZ P-09 GBB Airsoft Pistol is no different. Fit and finish is excellent and the quality of material is also very good with similar materials used as you would expect them compared to the real steel version with the exception of the metals not having to be as high grade because of way less force and pressure on the Airsoft version.
Realism: The KJWorks CZ P-09 GBB Airsoft Pistol is a one to one Replica of the real steel CZ P-09 firearm and on first inspection would be hard to tell apart. You are going to find CZ licensing throughout this Airsoft Pistol in all the right places and all the controls work just like the powder burning CZ P-09. The full blowback operation, reassessed barrel and ability to field strip it also aid in making the shooting experience super realistic.
Pros:
Build quality feels really goods, lots of weight to this Airsoft Pistol.
Full length blowback action.
Accurate licensed CZ P-09 Replica.
Trigger pull is nice in both single and double action.
Picatinny rail for adding accessories like a tac light or laser.
Double stack full size drop out Metal Magazine holds the Green Gas and 25 Airsoft BB’s
No orange tip which is always nice.
Easy to see white dot front and back sights.
Green Gas which when using propane is fairly cheap to shoot.
Easily Field Strippable.
Adjustable Hop-up.
Cons:
Sights don’t seem to be adjustable.
Controls are not fully ambidextrous.
Green Gas version has less velocity than CO2 version.
Comments:
The KJWorks CZ P-09 GBB Airsoft Pistol is really almost exactly like the ASG Distributed version since both are made by KJWorks at the end of the day. There are some slight differences between them like CO2 versus Green Gas and some other very minimal cosmetic changes. I would say go with which ever version is in stock and perhaps is less expensive at the time. You really can’t go wrong as this is a great choice to make for an Airsoft Side arm to use on the Airsoft field or for plinking in your yard or indoor range.
My Table Top Review Video of the KJWorks CZ P-09 GBB Airsoft Pistol:
Type: Gas Blowback Airsoft Pistol. Manufacturer: G&G Model: Piranha SL Materials: Metal & Polymer. Weight: 1.85 pounds (838 grams). Length: 10.3 inches (262mm) total. Barrel: 5.6 inches (142.5mm),Metal non-rifled smooth bore. Propulsion: Green gas or propane. Action: Blowback, single action only. Ammunition Type: 6mm plastic Airsoft BB's. Ammunition Capacity: 20/25rounds. FPS: 370+ fps.
Trigger Pull: The trigger pull on the G&G Piranha SL GBB Airsoft Pistol is typical single action only with a super easy short take up (some of which is the trigger safety engaging), followed by a crisp predictable light release. The quick slide cycle allows for some quick semi auto shooting with the G&G Piranha SL GBB Airsoft Pistol making it a great fast action shooter with quick target acquisition.
Accuracy: I have not done my actual Field Test Shooting video review for the G&G Piranha SL GBB Airsoft Pistol but I expect it to perform similar to the G&G Piranha MK I and TR GBB Airsoft Pistol I made a Field Test Shooting Video for earlier and shoot consistently in the mid to high 300 fps with a 10 round grouping around 1-2 inches. Stay posted for my Field Test Shooting Video where I will confirm these predictions…
Build Quality: Like pretty much all G&G Airsoft guns including the Piranha series, the G&G Piranha SL GBB Airsoft Pistol build quality is really good. Fit and finish are excellent with virtually zero slide wiggle, I like the two tone stainless slide and chrome finish barrel version but the all black looks really good too. As with the entire Piranha line, the SL also has an updated Ceramic Whirl Cylinder Valve technology from G&G that should significantly help with freezing in colder or fast shooting situations along with a new Hop-up system you can easily adjust without taking the Airsoft gun apart by using the bullet shaped tool.
Realism: The G&G Piranha SL GBB Airsoft Pistol as far as I can determines not an exact replica of any specific real steel gun in production but it does share its looks and feel to that of the Glock but perhaps with an even more modernized look to it. Of course the SL version is elongates. You will find realistic function to the G&G Piranha SL GBB Airsoft Pistoling terms of it’s operation with its full blowback action, working slide catch release, magazine release trigger safety and takedown lever allowing for it to be field stripped easily.
Pros:
Good balance of metal and plastic for a balanced and light feel.
Partial slide Blowback operation should allow for even better gas performance and snappy operation.
Fiber optic sights front and back for easy target acquisition.
Has a working trigger safety.
Smaller grips perfect for people with smaller hands. Larger hands work just fine too!
Comes in a well presented soft foam form fitted box case.
New Hop-up system for quick and easy fine adjustments with no need to field strip the gun.
Long bottom rail for adding accessories.
Comes in all black and two tone black and sliver.
Comes with two magazines (20 round short and 25 round extended with fake bullets)
Comes with high quality speed loader.
Threaded barrel tip for add on mock suppressor if you want to.
Cons:
Sights are non adjustable.
Not an actual replica of any specific gun I know of but does share some Glock attributes.
Wish the extended mag held more rounds?
I like the hard shell case better that comes with the other Piranha versions.
Comments:
The G&G Piranha SL GBB Airsoft Pistol is for sure the flashiest version of the Piranha series of G&G Airsoft Pistols with its extended barrel and extended magazine with the fake bullets. I also imagine the extra barrel length will add some addition fps to the velocity and we will find out when I make my Field Test Shooting Video for it shortly. I am hoping the extended magazine holds more than an addition 5 rounds but again we are going to find out in my my Field Test Video so be sure to watch that one! If you don’t mind the additional bulk of the G&G Piranha SL GBB Airsoft Pistol over the MK 1 and TR than you will get an extra magazine and I a bit higher velocity.
My Table Top Review Video of the G&G Piranha SL GBB Airsoft Pistol:
In this Field Test Shooting Video I perform two main test in the Replica Airguns Sea Can using the KJWorks KP-16 GBB Airsoft Pistol. First a chronograph test to see what the real world velocity is and then I perform an accuracy test to see how accurate the KJWorks KP-16 GBB Airsoft Pistol is at 30 feet from the target. If you’re interested more in specifications and details along with close up video of the KJWorks KP-16 GBB Airsoft Pistol then check out my Table Top Video Review for it where I show you around and do a field strip on camera.
Starting off with my chronograph velocity test. I decided to find out what the differences would be using the included internal short barrel and the extended external barrel since the KJWorks KP-16 GBB Airsoft Pistol does come with both in the box to allow for higher fps and easier import into Canada. The KJWorks KP-16 GBB Airsoft Pistol is rated for 360+ fps using the extended longer barrel so I used that one first to establish a baseline and was able to achieve a 394 fps 4 shot average. Switching up to the shorter internal barrel without the extension, the velocity was reduces as expected and I got an average 3 shoot velocity of 301 fps. So I can safely say that the barrel extension added an additional 90+ fps to the velocity in this case!
Next I placed a brand new paper target 30 feet down range and shot ten 20 gram Airsoft BB’s into it using a seated shooting position with my hands resting on a sand bag up front, this allows for a fairly stable platform to shoot from but is not without some human error to factor in. I also decided to use the barrel extension for this test as the threading on the end of the internal barrel can disrupt airflow causing air turbulence a bit and effect accuracy. I was able to get around a 2 inch grouping with my 10 rounds. The KP-16 GBB Airsoft Pistol shot a bit low and to the left out fo the box, adjusting the hop-up should correct the elevation but in terms of windage there is not sight adjustment other than perhaps playing around with the front removable sight and trying to movie it a bit to the left so as to make it shoot more to the right.
My take on the KJWorks KP-16 GBB Airsoft Pistol is it is a solid Airsoft Shooter with great modern 1911 tactical looks. The white dot sights make it a lot easier for my older eyes to line up on the target which makes this more practical for me. I also like the higher capacity magazine which again makes this a decent side arm for Airsoft wars. If you like the look of the 1911 but want it in a bit more of a modern configuration then the KJWorks KP-16 GBB Airsoft Pistol may just be the way to go!
In this Field Test Shooting Video I perform two main test using the WE 1911 GBB Airsoft Pistol. A chronograph test to see what the real world velocity is and then I perform an accuracy test to see how accurate the WE 1911 GBB Airsoft Pistol is at 30 feet away. If you are interested more in specifications and details along with close up video of the WE 1911 GBB Airsoft Pistol then check out my Table Top Video Review for it where I even do a field strip on camera.
Starting off with my chronograph velocity test. I decided to find out what the differences would be using the internal short barrel and the extended external barrel since the WE 1911 GBB Airsoft Pistol does come with both to allow for higher fps and easier import into Canada. The WE 1911 GBB Airsoft Pistol is rated for 360+ fps using the extended longer barrel so I started with that one first and was able to achieve a 383 fps 4 shot average. Switching to the shorter internal only barrel the velocity was reduces as expected and I got an average 3 shoot velocity of 300 fps. So it is safe to say that the barrel extension added an additional 80+ fps to the velocity!
Next I placed a fresh paper target 30 feet down range and shot 10 rounds into it using a seated shooting position with my hands resting on a sand bag up front, this allows for a fairly stable platform to shoot from but is not without some human factor. I also decided to use the barrel extension for this test as the threading on the end of the internal barrel can disrupt airflow causing turbulence a bit and effect accuracy. I was able to get around a 2.5 inch grouping with my 10 rounds. The WE 1911 GBB Airsoft Pistol shot fairly well on the bullseye up and down with the out of the box hop-up setting but it did shoot just slightly to the left. Since there are no sight adjustments you will have to factor this into your aim point when shooting out at farther ranges, but at around 30 feet you should not have much problem shooting a human sized target or even a pop can.
All in all the WE 1911 GBB Airsoft Pistol perfumed as expected with consistent fps and a nice 10 shot grouping on my paper target. I did find the sights a bit hard to see as my eyes are not what they use to be so black sighted pistols with whit dot sights make it a lot easier for me to line up my target. People with younger eyes will most likely not have this problem but for us a bit older guys, keep this in mind. If you’re looking for a classic 1911 A1 that performs well and looks really nice then the WE 1911 GBB Airsoft Pistol may be just the perfect fit for you!
