In this velocity and accuracy Field Test Shooting Video for the ASG Cobray Ingram M11 NBB CO2 BB Machine Pistol, I test out the velocity in feet per second (FPS) using a brand new 12 gram CO2 loaded up with 4.5mm zinc coated Steel BB’s by averaging out 5 rounds shot through my Chronograph. ASG claims 394 fps on the box which sounds about right for a non blowback CO2 BB Pistols of this type. I then setup a fresh paper target 30 feet down range in the Replica Airguns Sea Can, and shoot 10 BB’s at it using a semi rested shooting position to find out how the ASG Cobray Ingram M11 NBB CO2 BB Machine Pistol performs and if it shoots near the bullseye out of the box, and if it can get a decently tight 10 shot grouping. If you have not already watched my Table Top Video Review for theASG Cobray Ingram M11, then make sure to watch it for details, specifications and some nice close up 4k video.
I start off my Field Test with velocity test of the ASG Cobray Ingram M11 NBB CO2 BB Machine Pistol by shooting 5 rounds through the Chronograph and then averaged them out. The slowest of the 5 shots was 397 fps while the fastest shot topped out at 409 fps, this averaged 399 fps which was slightly higher than claimed 394! Temperature was maybe a bit under 20 degrees Celsius, closer to 18 or 19 which in Fahrenheit is in the low to mid 60 degrees. It is likely the ASG Cobray Ingram M11 NBB CO2 BB Machine Pistol could reach higher fps velocities in warmer temperatures.
For the accuracy portion of the Filed Test I placed a fresh paper target 30 feet downrange, and using a semi rested shooting position (hands rested on a sandbag up front and sitting on a stool in the back) I placed 10 rounds into the target with the ASG Cobray Ingram M11 NBB CO2 BB Machine Pistol. The ASG Cobray Ingram M11 did end up shooting fairly well centered on the target with two rounds even entering the bullseye. I found it shot just slightly to the left but not by much, in terms of elevation I did end up having to shoot about 3 inches lower on the target to hit near the center. The grouping for the 10 rounds was about 2.5 inches total so not too bad for having such an open peep sight to look through. I did extend the Ingram M11 NBB out in front of me rather than using the rear stock as I felt the rear sight was just too close and too open at that distance for me.
The ASG Cobray Ingram M11 NBB CO2 BB Machine Pistol is a pretty basic non blowback BB Pistol but it does perform not too bad getting good fps of close to 400 and able to shoot fairly well centered at 30 feet out with a respectable 2.5 inch shot grouping. The trigger is a bit on the heavy and long side but this is generally true for most double action triggers. If you do plan on opening the rear stock and placing it on your shoulder you will find that rear sight to be very wide since it is so close up, this will allow for quick target acquisition but it also makes accuracy harder since the front sight is kind of swimming in that rather large peep opening. I prefer just holding the ASG Cobray Ingram M11 NBB CO2 BB Machine Pistol out in front of me pistol style but you can try it for yourself and decide which way works best for you. If you are looking for a MAC 11 BB Pistol this may just be your only option for now but it is lower cost and still a lot of fun to shoot.
Type: Non-blowback CO2 BB Pistol. Manufacturer: Distributed by ASG. Model:Cobray Ingram M11 Materials: Mostly plastic, some metal. Weight: 1.2 pounds (544 grams). Total Length: 10.25/18 inches (260/457mm). Barrel: 5.25 inches (133mm) metal rifled. Propulsion: CO2 x 1. Action: Semi auto non-blowback, DOA trigger. Ammunition Type: .4.5mm steel BB’s. Ammunition Capacity: 39 round drop out plastic magazine. FPS: Claimed 394.
Trigger Pull: The trigger pull on ASG Cobray Ingram M11 NBB CO2 BB Machine Pistol is exactly what you would expect from a NBB CO2 BB double action trigger. It is on the longer and slightly heavier side as your finger is required to do all the work, rather than the blowback action at least cocking the hammer back for you. Getting through the 39 rounds quickly will be a chore for sure, but by the time you reload it again with another 39 rounds your finger should be rested enough!
Accuracy: My dedicated field test shooting video is planned for next week so for now I have no idea what to expect in terms of velocity and accuracy from the ASG Cobray Ingram M11 NBB CO2 BB Machine Pistol other than it should shoot around 400 fps as claimed by ASG. The rather open rear peep sight is on the larger side since the sight sits so close to your face so as long as I can find the center point I should be able to get a decent result from the ASG Cobray Ingram M11. We will find out soon enough so stay posted for that shooting video review.
Build Quality: The ASG Cobray Ingram M11 NBB CO2 BB Machine Pistol is not a poorly made Airgun by no means, just don’t expect a lot of metal as the only metal parts are going to be the stock, the inner barrel, and some other internal metal parts. Everything else is plastic but it works just fine. I do have to say the metal wire stock is really well built and is the best part of this Airgun for sure. It is as good or similar in quality to what you would find on the real steel version.
Realism: The ASG Cobray Ingram M11 NBB CO2 BB Machine Pistol is a 1 to 1 replica of a standard MAC11 and it looks just like one at a glance and perhaps even a bit closer up but as soon as you hold it you will feel how light it is at around 1.2 pounds. There are also very few working parts as many are moulded into the upper and lower receiver. The trigger, magazine release, stock button and safety switch however are all functional which is kind of necessary. The reassessed barrel, adjustable wire rear stock and full size drop out magazine do help add to the realism.
Pros:
Double action trigger is a bit long but not super heavy, it will make you work for action styled shooting.
Fit and finish looks good.
In terms of realism it does look legitimate even though it is very light weight to hold.
High capacity magazine for lots of shots between reloading.
Metal stock is the best part of this pistol, very well made.
Peep sight in back is ideal for quick targets acquisition.
Can kind of field trip but be careful of the safety, must remove first.
Recessed barrel for added realism.
Full size magazine holds the CO2 and BB’s.
Cobray licensing looks good on this gun, no ugly white warning print.
Cons:
Some more metal and weight would have been nice.
Peep sight in the back seems too large as it is so close to your face.
Not a lot of working parts other than the trigger, safety, stock adjustment and magazine release.
Comments:
In terms of 4.5mm BB Airguns out there, I am pretty sure there are no other MAC11 type on the market? So at least ASG has brought us an option to add something like this to for our Airgun collection. I just wish that like the Mini UZI, we had a blowback option with more metal as this is really the more desired choice we are looking for, at least of many of us. The ASG Cobray Ingram M11 NBB CO2 BB Machine Pistol isn’t going to be all that expensive and offers some fun plinking with decent looks, hopefully a company steps up to the table and makes us a blowback metal version down the road, but for now we at least have the ASG Cobray Ingram M11 NBB CO2 BB Machine Pistol.
In this real world shooting Field Test Video of the ASG CZ Shadow 2 Blowback CO2 BB Pistol, I find out what the velocity is using a brand new standard 12 gram CO2 shooting 5.1 grain 4.5mm Steel BB’s through my Chronograph. I then setup a fresh paper target 30 feet down range and shoot 10 rounds into it using seated semi rested shooting position to find out if the ASG CZ Shadow 2 Blowback CO2 BB Pistol Field Test Review anywhere near the bullseye out of the box and if it can get a tight grouping. If you have not already watched my Table Top Video Review for the ASG CZ Shadow 2 Blowback CO2 BB Pistol, then make sure to do so for details, specifications and some nice close up video.
For my velocity test of the ASG CZ Shadow 2 Blowback CO2 BB Pistol, I a lot of rounds through the chronograph as the fps velocity kept creeping up, but I did average out the last 5 shots to get my official average. The slowest fps was 263 with the fastest shot hitting 289 fps, this averaged 283 fps when using the last 5 shots which was almost bang on to what ASG claims of 285. Temperature was maybe just under 20 degrees Celsius which is around 65 or so degrees Fahrenheit, so good to get middle of the road performance here. In warmer temperature you can expect a bit higher velocities.
I then placed my paper target 30 feet downrange and using a semi rested shooting position (hands rested on a sandbag up front and sitting on a stool in the back). I placed 10 rounds into the target and was able to get right around a 2 inch shot grouping with just one flyer that went a bit higher than the rest, probably was me! I was aiming just under the bullseye and the ASG CZ Shadow 2 Blowback CO2 BB Pistol shot about 3 inches low and just a hair to the left but the good news is the sights are fully adjustable so you can zero it in perfectly for your shooting style and range of shooting.
I really like this ASG CZ Shadow 2 Blowback CO2 BB Pistol, it is a bit of a handful at almost 3 pounds but it feels well balanced and the blowback is nice and strong. It has a really great single action trigger that is short and light and predictable. You can also shoot in double action if you drop the hammer for some reason, just make sure you have already reached the slide to load a BB in the breach. The fps is not super high with this Full Blowback CO2 BB Pistol, but it did stay very consistent during my testing not dropping nearly as fast or as much as other similar CO2 BB Pistols. The price is a little bit higher on this version but you get a lot of gun for the money with quality materials throughout.
In this performance Field Test Video of the ASG CZ 75 SP-01 Shadow Blowback CO2 BB Pistol, I find out what the velocity is using a brand new standard 12 gram CO2 shooting a bunch of 4.5mm Steel BB’s through my Chronograph. ASG claims around 312 by the way. I then setup a fresh paper target 30 feet down range and shoot 10 rounds into it using a semi rested shooting position to find out if the ASG CZ SP-01 Shadow Blowback CO2 BB Pistol shoots well centered on the target out of the box and if it can shoot a decent grouping. If you have not already watched my Table Top Video Review for the ASG CZ SP-01 Shadow Blowback CO2 BB Pistol, then make sure to do so for details, specifications and some nice close up video.
First up for my velocity test of the ASG CZ SP-01 Shadow Blowback CO2 BB Pistol, I shot I think it was 7 or 8 rounds through my Chronograph and then averaged them all out. The slowest fps was 305 with the fastest shot hitting 317 fps, this averaged 311 fps which was almost bang on to what ASG Claims of this CO2 BB Blowback Pistol. Temperature was maybe just under 20 degrees Celsius which is around 65 or so degrees Fahrenheit, so good to get middle of the road performance here. In warmer temperature you will get a bit higher velocities.
I then placed my paper target 30 feet downrange and using a semi rested shooting position (hands rested on a sandbag up front and sitting on a stool in the back - not because I’m lazy). I shot 10 rounds into the target and was able to get just a bit over 2 inch shot grouping. I was aiming just under the bullseye and the ASG CZ 75 SP-01 Shadow Blowback CO2 BB Pistol did shoot a bit low and and to the left, so you will have to aim a bit high and to the right if you shoot like I do since this Replica BB Revolver does not have sight adjustments on it.
The ASG CZ SP-01 Shadow Blowback CO2 BB Pistol did pretty good in my testing hitting an averaged out 311 fps which is only 1 fps off of the claimed. The ASG CZ SP-01 Shadow also shot a respectable 10 shot grouping and like many BB and Airsoft guns, it shot a bit low on the target. There is internal adjustable hop-up in this CO2 BB Pistol, so perhaps if you crank that up a bit, it may shoot slightly higher but keep in mind Steel BB’s are lot more dense than Airsoft BB’s so I would not expect a radical change in elevation from hop-up alone. I do like the heavy blowback and smooth and light single action trigger that can also shoot in double action if need be. For a quality product like this the price is good so if you like CZ products then check this one out.
Type:Blowback BB Pistol. Manufacturer: Made and Distributed by ASG. Model:CZ Shadow 2. Materials: Mostly all Metal. Weight: 2.7 pounds (1230 grams). Barrel: 4.5 inches (114mm) metal non-rifled. Total Length: 85 inch (215mm). Propulsion: 1 x CO2. Action: Semi auto blowback, single & double action trigger. Ammunition Type: 4.5mm steel BB's. Ammunition Capacity: 17 round drop out full size metal magazine. FPS: Claimed 285.
Trigger Pull: The trigger pull on the ASG CZ Shadow 2 Blowback CO2 BB Pistol is both single and double action, by either pulling the slide or hammer back you engage the single action trigger which is nice and short and light with a medium take-up. You will need to pull the slide back to load a BB into the breach area for your first shot or you will simply be shooting CO2 on that first shot. If you drop the hammer down once a BB is in the breach, you can shoot in double action which is much heavier but it is fairly smooth without any noticeable sticking points.
Accuracy: I have not shot the ASG CZ Shadow 2 Blowback CO2 BB Pistol or made my Field Test Shooting Video so far, that will happen hopefully next week. So right now I can not comment on the true velocity or accuracy of this BB Pistol. It is very well made so I expect it to perform like most Full Blowback CO2 BB pistols which means it should shoot around a 1-2 inch 10 shot grouping at 30 feet away. And I expect it to achieve a velocity close to the manufacturers claimed fps, so just under 300 fps as claimed by ASG. We will find out for sure next in a weeks time!
Build Quality: TheASG CZ Shadow 2 Blowback CO2 BB Pistol is distributed by ASG but I am not 100% sure who exactly makes it for them. I feel it is either going to be KJWorks or KWA. In either case both companies make very high quality Airsoft and Airguns and that is present with the ASG Shadow 2 Blowback CO2 BB Pistol. Fit and finish are excellent and the entire gun is virtually all metal with an anodized slide and zinc grips. It weighs in at a very hefty 2.7 pounds and has a very solid feel to it.
Realism: The ASG CZ Shadow 2 Blowback CO2 BB Pistol is a 1 to 1 copy of the real steel CZ Shadow 2 IPSC Pistol and side by side it would be very hard to tell one form the other. It features full blowback operation and can by fully field stripped. All the mechanical parts work like the real steel version adding to the realism of shooting this CO2 Competition built Blowback BB Pistol. Again it is full metal which not only helps it look the part, but also feel the part. It is a very realistic replica and to make it even more believable, ASG has provide the CZ licensing to add all the correct markings to this product.
Pros:
Single and double action trigger with a nice light short single action trigger.
Fit and finish is excellent, very little slide wiggle, all metal build.
This pistol is heavy at 2.7 pounds!
Extremely close replica of the real steel CZ Shadow 2 in both looks and function.
Rear sight is fully adjustable and sits very flush with the slide.
Fiber optic front sight helps with quick targets acquisition.
CNC machined Aluminum slide and full metal build including the machined zinc pistol grip sides.
Recessed barrel for added realism.
Full size 17 round metal magazine holds the CO2 and BB’s and adds additional weight.
Side swappable Ambidextrous magazine release.
Extended trigger guard makes shooting with gloves easier.
Claimed to be highly accurate, we will find out during my Field Test.
Most Mechanical parts work just like a steel version and can be easily field stripped to access hop-up.
Heavy slide spring with fast blowback action, great for action shooting.
Licensing all over this gun true to the real steel version.
Cons:
Velocity of claimed 285 seems low.
Price will be a bit higher than some similar guns like this but the quality of the ASG CZ Shadow 2 is very high.
May be a bit heavy for some people.
Comments:
The ASG CZ Shadow 2 Blowback CO2 BB Pistol is a quality product all around not only being just full metal but also icormdrating Anodized Aluminum in the slide but also making the grips out of CNC Zinc. Fit and finish is excellent and the overall IPSC look is very appealing. It is a bit heavy coming in at 2.7 pounds but this will keep it very stable when performing competition styled shooting. I am really looking forward to seeing how this one performs as I have high expectations so I hope later on next week when I make my Field Test Shooting video it delivers as promised.
Type:Blowback BB Pistol. Manufacturer: Made and Distributed by ASG. Model:CZ 75 SP-01 Shadow. Materials: Mostly all Metal. Weight: 2.37 pounds (1076 grams). Barrel: 4.5 inches (114mm) metal non-rifled. Total Length: 8.26 inch (210mm). Propulsion: 1 x Co2. Action: Semi auto blowback, single & double action trigger. Ammunition Type: 4.5mm steel BB's. Ammunition Capacity: 17 round drop out full size metal magazine. FPS: Claimed 312.
Trigger Pull: The trigger pull on the ASG CZ 75 SP-01 Shadow Blowback CO2 BB Pistol is both single and double action, by either pulling the slide or hammer back you engage the single action trigger which is nice and short and light with a medium take-up. You will need to pull the slide back to load a BB into the breach area for your first shot or you will simply be shooting CO2 on that first shot. If you drop the hammer down once a BB is in the breach, you can shoot in double action which is much heavier but it is fairly smooth without any noticeable sticking points.
Accuracy: I have not shot the ASG CZ 75 SP-01 Shadow Blowback CO2 BB Pistol or made my Field Test Shooting Video for it, that will happen next week. So for now I can not comment on the true velocity or accuracy of this product. It is very well made so I expect it to perform like most Full Blowback CO2 BB pistols which means it should shoot around a 1-2 inch 10 shot grouping at 30 feet away, and I expect it to achieve a velocity close to the manufacturers claimed fps, so around 300 fps or just above. We will find out for sure next week!
Build Quality: TheASG CZ 75 SP-01 Shadow Blowback CO2 BB Pistol is distributed by ASG but I am not 100% sure who makes it for them. I feel it could be either KJWorks or KWA. In either case both companies make very high quality Airguns and that is present with the ASG CZ 75 SP-01 Shadow Blowback CO2 BB Pistol. Fit and finish are excellent and the entire gun is virtually all metal. It weighs in at almost 2.5 ponds and has a very solid feel to it.
Realism: The ASG CZ 75 SP-01 Shadow Blowback CO2 BB Pistol is a 1 to 1 copy of the real steel CZ 75 SP-01 Shadow and side by side it would be very hard to tell them apart. It features full blowback operation and can by fully field stripped. All the mechanical parts work like the real steel version adding to the realism of shooting this CO2 Blowback BB Pistol. Again it is almost all metal which not only helps it look the part, but also feel the part. It is a very realistic replica and to make it even more believable, ASG has provide the CZ licensing to add all the correct markings to this product.
Pros:
Single and double action trigger with a nice light short single action trigger.
Fit and finish is excellent, very little slide wiggle, all metal build.
This pistol is pretty heavy at just under 2.5 pounds!
Extremely close replica of the real steel CZ SP-01 Shadow in both looks and function.
Well priced for a quality Airgun.
Fiber optic front sight helps with quick target acquisition.
I like the stainless barrel, it won’t be as prone to scratches and wear marks.
Deep recessed barrel for added realism.
Full size 17 round metal magazine holds the CO2 and BB’s and adds additional weight.
Rail for adding accessories like a laser or tac light.
Most mechanical parts work just like the steel version and can be easily field stripped to access the hop-up.
Heavy slide spring with fast blowback action, great for action shooting.
Licensing all over this gun, true to the real steel version.
Cons:
Rear sight is not adjustable.
FPS is perhaps a bit low at 312?
May be a bit heavy for some people.
Comments:
I am pretty sure that the ASG CZ 75 SP-01 Shadow Blowback CO2 BB Pistol started out life as a 6mm Airsoft Pistol, and then this version was simply converted over to shoot 4.5mm Steel BB’s by more than likely swapping out the barrel, perhaps changing the nozzle and modifying the magazine to allow for 4.5mm BB’s over the 6mm Airsoft BB’s. And that is OK with me as I really like how Full Blowback Airsoft Pistols recreate that realistic shooting experience. The downside to all of this is a bit of a perforce hit since Full Blowback Airsoft Pistols use up a lot of CO2 to create that full heavy blowback experience. You also lose some power along the way. I am fine with that but some people may not be. Overall I really like the ASG CZ 75 SP-01 Shadow Blowback CO2 BB Pistol. It is high quality and looks awesome. Now I just need to find out how it shoots :)
I’ve got some new Airguns to show everyone today and all of them are Pistols of some sort or another. I show you three 4.5mm BB Pistols from ASG, a Cybergun 1911 NBB BB Pistol, an Airsoft Full Blowback Pistol from EMG and lastly from Umarex, an HK Full Blowback Airsoft Pistol. This is not a full review by any means, the video is mainly to let you know what is coming up in terms of Table Top and Field Test Videos and that we do have these products at least listed in our Replica Airgun Store.
It’s alwasy nice to have a chat with Bob at ASG, I have been interviewing him for years now and really missed not being at SHOT Show the last three years. As always, Bob really knows the ASG product line inside and out and took us through some of the new products and changes to the ASG lineup in 2024.
Some of the products include: The ASG CZ P-10 C CO2 Blowback Airsoft Pistol, the Steyr L9-A2 CO2/Gas Blowback Airsoft Pistol, the USW Gas Blowback Airsoft Pistol, the new Hybrid Airsoft line including the CO2 Blowback H-22 and the AEG H-15, the ICS Ape SE AEG Airsoft Rifle, and lastly the ICS Carnotaurus, Legacy, ACME High-Capa Pistol Series.
I am looking forward to get my hands-on many of these new ASG products and making reviews for everyone to checkout in the near future…
I’m back from SHOT Show 2024 and I always like to start off my series of SHOT Show Interview videos with a Teaser Video that not only shows off a few new guns but also gives everyone a vibe of what it feels like to visit Las Vegas and SHOT Show. I can only show you so much because as you know what happens in Vegas stays in Vegas…
I did get the chance to interview several Airgun Companies that I will be putting together Interview Videos for, including Umarex, ASG, KWA, Barra, EKOL and Byrna. Unfortunately Sig Sauer is no longer attending SHOT Show and Crosman had significantly reduced the focus of their booth and really did not have much in the way of Replica Airguns to show.
Type: Blowback CO2 BB Pistol. Manufacturer: Distributed by ASG. Model: 1911 US-C. Materials: MostlyMetal. Weight: 1.9 pounds (874 grams). Total Length: 8.7 inches (220mm). Barrel: 4.7 inches (119mm) metal non-rifled. Propulsion: CO2 x 1. Action: Semi auto blowback, SOA trigger. Ammunition Type: .4.5mm steel BB’s. Ammunition Capacity: 18 round drop out full size metal magazine. FPS: Claimed 420.
Trigger Pull: The trigger pull on the ASG 1911 US-C CO2 Blowback BB Pistol is surprisingly really good as this is a new design mechanically different than the standard KWC 1911. There is a slide nozzle on the top of the magazine that pushes a BB into the breach area of the barrel and seals off the magazine for the barrel allowing for higher fps and I would imagine better CO2 efficiency. There are other Blowback Airguns that do this but most incorporate the trigger force to push the slide nozzle forward causing some friction and creating more of a double action trigger feel. I believe the ASG 1911 US-C CO2 Blowback BB Pistol uses the blowback action to engage this slide nozzle allowing for a true short and light single action trigger. Which the ASG 1911 US-C CO2 Blowback BB Pistol does have.
Accuracy: At this point I have not shot the ASG 1911 US-C CO2 Blowback BB Pistol or done my Field Test Performance Video. I really have no idea what to expect from it as this a new design I have never seen or shot before. I have high expectations based mainly on the advertised specifications but also from my observations looking over the mechanics and how this Airgun feels in the hand. Hopefully it performs as good as I am wishing for…
Build Quality: The ASG 1911 US-C CO2 Blowback BB Pistol has good fit and finish, I would compare it to a KWC 1911 in this department, I have a feeling it may be made in the KWC factory as the manual uses some of the same graphics found in most KWC manuals. I could be wrong here. That said the ASG 1911 US-C CO2 Blowback BB Pistol is mostly all metal with the exception of the pistol grips as expected.
Realism: The ASG 1911 US-C CO2 Blowback BB Pistol looks exactly like a real steel 1911 with the exception of an additional pin in the frame. The slide also does not cycle as much as a real steel 1911 or even like a standard KWC 1911 and field striping will not be done in the conventional manner since the slide catch release does not easily come out. All that said I feel like tis 1911 airgun design may be a nice compromise between performance and realism.
Pros:
Has that well liked KWC 1911 look but with different internals.
Looks to have a nice short and light single action only trigger.
Because of new type design I expect really good fps and lots of shots per CO2.
All working parts just like a real steel 1911.
Working safety and grip safety.
Full size drop out metal magazine that holds the CO2 and 18 rounds.
Integrated CO2 Allen key tool.
Recessed barrel for realism.
Blowback action for simulated recoil and a smoother trigger.
Good overall fit and finish.
Cons:
Painted markings on slide are a bit much.
Field strip is not conventional.
Sights are not adjustable.
Comments:
I am really optimistic that the ASG 1911 US-C CO2 Blowback BB Pistol will be a real winner here as it has a lot going for it! First of all it’s a 1911 and who doesn’t like a 1911? It is also a really solid replica on its own rights so it should check most boxes here with its blowback action, full size drop out metal magazine, nice SAO trigger and all metal build. On top of this all ,the specifications look really good with higher velocity than the standard KWC 1911 and I am also assuming better CO2 efficiency. Take all of this into account and the ASG 1911 US-C CO2 Blowback BB Pistol could be the new 1911 standard to go by.
In this Update Preview Video I take a look at three CO2 Air Pistols from ASG, Gamo and Barra. All shoot 4.5mm steel BB’s and one can also shoot .177 caliber pellets. two of them have blowback action. Two are also styled after the popular 1911 Semi Auto Pistol. The ASG 1911 has a unique magazine and chambering system that is the first I have seen of this in a Blowback Airgun. It offers with blowback operation along higher fps and a nice light semi auto trigger, which is a combination not offered in many Airguns.
I have made a fair amount of video reviews for the Dan Wesson Line of AIrguns that encompass Table Top and Field Test Reviews on several versions of the Dan Wesson line: BB, Pellet, Airsoft, in a variety of barrel and color choices. It has been a while, so why not make another Review Video to revisit the Dan Wesson Line and so this time here we have the Steel BB version in a 2.5 inch barrel length. As always I will test they CO2 Revolver to find out what the velocity is and how accurate it is shooting at a paper target. Also make sure to watch my Table Top Video for specifications, details and closeup video.
Here we go with the Velocity test! I placed a brand new CO2 in the ASG Dan Wesson 2.5 inch Gold CO2 BB Revolver and shot a cylinder full of 4.5mm steel BB’s that weigh 5.1 grain through my Chronograph. The temperature was average so about room temperature. Only the last 4 of my shots registered on my Chronograph as it was acting up a bit on me at first two shots but I did manage to average 332 fps with the last four. The first two shots would have been a little bit faster had they registered on my chronograph so this may have brought up the average a bit to say around 334…
I then placed a fresh paper target 30 feet down range and proceeded to unload a full 6 round cylinder into it, I was shooting in single action with the hammer cocked back between shots. I was also using a semi rested shooting position with my hands resting on a sand bag up front and seated in the back for stability. Generally speaking even with Steel BB’s I can get close to a 1-2 inch grouping with hess Dan Wessons but this time my 6 shot grouping only produced a 3 inch group? It was probably me as there is always some human error involved and each test can result in different results so keep that in mind. The grouping was well centered out of the box but the ASG Dan Wesson 2.5 inch Gold CO2 BB Revolver does have fully adjustable sights in case yours is a bit off.
It never get’s old loading up the shells with ammo and placing them in the cylinder followed by either quick action shooting or more relaxed and accurate single action shooting, then repeating again and again… The original Dan Wesson line of revelers has been around for a long time now and if I am not mistaken was the first Airgun revolver to use reloadable shells. We now have more refined 715 version of the Dan Wesson which does have some improvement but the original versions still hold strong and are very capable and fun shell loading revolvers that come it a bit lower price tag then the newer 715 versions so no matter which version you get you will have lot of fun shooting and reloading these enjoyable Airguns!
Type: BB Revolvers. Manufacturer: ASG Model: Dan Wesson 2.5 inch Gold Materials: Mostly metal. Weight: 1.9 pounds. (862 grams) Barrel: Metal non-rifled. Propulsion: CO2 x 1. Action: Revolver, single and double action. Ammunition Type: 4.5mm Steel BB's. Ammunition Capacity: 6 rounds (removable shells). FPS: 327
Trigger Pull: The ASG Dan Wesson 2.5 inch Gold CO2 BB Revolver shoots in true modern revolver style offering single and double action. The double action has a bit of friction to it since the cylinder is being rotate during the first part of the trigger pull and there is a spring fed metal gasket between the barrel and the cylinder that creates a seal but does add some resistance to the trigger pull in double action. Single action is much lighter as expected since pulling the hammer back turns the cylinder removing that friction point from the equasion.
.Accuracy: So far I have not done my Filed Test Shooting Video for the ASG Dan Wesson 2.5 inch Gold CO2 BB Revolver, but I plan to in the near future as a revisit since I have made a lot of similar Field Test Videos for the Dan Wesson line of products in 4.5mm Steel BB and 6mm Airsoft, here is a link to me shooting the 8 inch a while back in my old setup. Wow, this one goes back to 2014 almost 10 years ago!
Build Quality: The ASG Dan Wesson 2.5 inch Gold CO2 BB Revolver overall is really well built with good weight to it and a nice fit and finish, I do like the Gold version in this 2.5 inch version. It is almost all metal with the exception of the grips which are made of a semi hard plastic. One beef I have with the original ASG Dan Wesson line of revolvers are how the grips slide back to access the CO2, closing them can be a bit of a chore as they can come off their track super easily. The other complaint I hear about them is the play in the trigger and hammer side to side.
Realism: The ASG Dan Wesson 2.5 inch Gold CO2 BB Revolver like all the other ASG Dan Wesson Revolvers is very realistic with its realistic pop out cylinder and 6 removable shells you can reuse and load up for numerous rounds of shooting. You can also buy additional shells and have them preloaded and ready to go in the Speed loader to speed things up. Two things about the ASG Dan Wesson 2.5 inch Gold CO2 BB Revolver that take away a bit from the realism would be the non recessed barrel and the rather large space in front of the hammer. A real steel Dan Wesson or even most revolvers do not have this large space. I believe they did this to allow for the internal valve system. The newer Dan Wesson 715 however was designed with a smaller space in front of the hammer.
Pros:
It's a revolver with actual shells! Gives you the feeling of a real 6 shooter.
Almost all metal design with good weight and feel.
Lots of detail in this gun, very well made, fit and finish is very good.
Good power and good accuracy. (going off of already done older reviews)
Fully adjustable rear sight for windage and elevation.
Can add the included accessory rail for more options (optical or red dot sight…).
Dan Wesson licensed via ASG.
Gold finish is unique. (Gold is the Best!)
Moulded and textured pistol grips.
Grips fully hide CO2 screw.
Can shoot in both double and single action for action shooting or more accurate shot placement.
Cons:
Plastic CO2 screw tab.
Plastic grip setup can be a bit awkward to close.
2.5 inch does not have the recessed barrel.
Hammer and trigger are a bit sloppy compared to 715 version.
Comments:
It’s been a while since I reviewed one of the first generation ASG Dan Wesson Revolvers and the ASG Dan Wesson 2.5 inch Gold CO2 BB Revolver does bring back some memories for me going back almost a decade. If I’m not mistaken this revolver was the first one to implement actual removable and reloadable shells making Airgun Replica Revolvers a lot more interesting and realistic! I do kind of prefer the newer 715 version as they are even beefier than the original ASG Dan Wessons and ASG has fixed the sloppy hammer and trigger along with the space in front of the hammer has been reduce making the 715 even that much more realistic.
Watch my Vimeo Video Table Top Review for the Dan Wesson 2.5 Inch Gold BB Revolver:
In this Preview Review Video I take a look at 4 newer products now in our Replica Airguns Online Store. One is a 4.5mm Steel BB Revolver, two are 6mm Airsoft Pistols and one is a .68 caliber Paintball Shotgun.
The first item I take look at in this video is the Umarex HK30 AEG Airsoft Pistol, this product is pretty entry level with analyst all plastic build and is very light to hold. It does however shoot in both semi and full auto since it is an AEG Airsfto Pistol (not many of them out there). The fps is rather low at a claimed fps at just under 200, the Umarex HK30 AEG Airsoft Pistol also comes with two 16 round remove; plastic magazines. Who knows, maybe it will be fun?
Next I take a look at the ASG Dan Wesson 2.5 inch 4.5mm Steel BB Gold Revolver. This is a CO2 powered shell loading BB revolver very much like similar ones I have reviewed in the past but in Gold finish. Will the gold finishes make it perform better, well I guess we better find out!
I then take a look at a “Glock Like” CO2 Blowback Airsoft Pistol for KJWorks called the KP13. It has a full size drop out metal magazine that holds the CO2 along with 24 rounds of 6mm Airsoft BB’s. The KJWorks KP-13 has a metal slide, metal magazine and polymer frame with a velocity over 360fps using the included barrel extension.
Last but perhaps the most interesting for me is the Umarex T4E HDB which is a lower cost Paintball/Rubber Ball Shotgun which could possibly be used for home protection? The T4E HDB is a mostly plastic constructed rifle with decent weight to it and uses an internal spring fed 16 round magazine. You will find all kinds of mounting points for accessories and for a sling on the Umarex T4E HDB and again at much lower cost than similar T4E rifle based Paintball/Rubber ball Airguns.
Back in 2017 I made “Which Beretta Airgun is the Best” Video and showed off some 4.5mm Steel BB and .177 Caliber Pellet versions of my favorite Beretta 92 - M9 style Air Pistols. There have been some changes since then most noticeably the addition to Airsoft versions so I thought I would update this video with more current Beretta Airguns along with of course some of the same ones form my last video.
Because I show off 4.5mm Steel BB, .177 Caliber Pellet and 6mm Plastic Airsoft versions I decided to pick my favorites form each category. Watch my Vimeo Review Comparison Video so checkout these Air Pistols and see which ones are my favorites…
.177 Caliber Pellet Beretta 92 -M9 CO2 Air Pistols
Took me a while to get to this Field Test Shooting Video for the ASG CZ Scorpion EVO 3 A1 6mm AEG Airsoft Gun but glad I took a look at it even if it is over 6 years already on the market. As per usual I test out the velocity shooting several ordains through my Chronograph to see what the real world fps is, I then follow this up with an accuracy test shooting 10 rounds on a paper target setup 30 feet downrange to see how tight of a grouping I can get. Also make sure to watch my Table Top Video for the ASG CZ Scorpion EVO 3 A1 6mm AEG Airsoft Gun for information on the specifications and features along with some nice close up video.
Starting with my Velocity Test I placed 6 rounds through my Chronograph using .20 gram Airsoft BB’s clocking in an average of 421 fps. I was very impressed with the consistency of the velocity with the lowest shot being 420 fps and the fastest shot being 422 fps only 2 fps apart! You can change out the spring super easy on the ASG CZ Scorpion EVO 3 A1 6mm AEG Airsoft Gun but I feel that the fps out fo the box would be good for most Airsoft games indoor and outdoor.
I then places a brand new paper target 30 feet downrange and proceeded to shoot 10 rounds at it in semi auto using a seated shooting position rested on a sand bag up front. I was able to get very close to a 1 inch grouping just a tad over an inch. I did not sight in the gun so I was not surprised I was shooting rather low and just a hair to the left, this could be equally corrected by adjusting the rear sight for windage and elevation. I could also play around with the hop-up effecting elevation at different ranges. I then proceeded to shoot take some more shot in both 3 round burst adn full auto modes and as expected the groupings did spread out a bit but not a lot.
I was super impressed with eh performance of the ASG CZ Scorpion EVO 3 A1 6mm AEG Airsoft Gun, I don’t think I have seen velocity consistency this good in any other AEG Airsoft gun I have tested so far. Accuracy was also on point even using lighter plastic .20 gram Airsoft BB’s. My only real grip with the ASG CZ Scorpion EVO 3 A1 6mm AEG Airsoft Gun is the limited battery choice since the internal storage ares is very constricted. Other than that this Airsfot Gun is a winner and worth taking a look at if you can get your hands on one.
Type: Airsoft AEG. Distributer:ASG. Model: CZ Scorpion EVO 3 A1. Materials: Metal and polymer build. Weight: 5.3 pounds (2400 grams). Barrel: 208mm (8.2 inches) Total Length: 425-623mm (16.7-24.5 inches). Propulsion: AEG. Action: Semi, burst, full auto. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: 75 rounds. FPS: 395.
Trigger Pull: The trigger pull on the ASG CZ Scorpion EVO 3 A1 6mm AEG Airsoft Gun is essentially just an on off electric switch controlled by the ECU. There is very little trigger resistance and the take up is very short allowing for quick semi auto shooting but if you like you can easily select three round burst or full auto shooting for more intense situations.
Accuracy: I have not performed my Field Test Shooting Video for the ASG CZ Scorpion EVO 3 A1 6mm AEG Airsoft Gun but plan to get to that video next week. I really have no idea what to expect at this point since i have not even loaded up a magazine and taken it for a spin yet. I am sure I will not be dissapoitned as this is a very high quality Airsoft Gun with great internals.
Build Quality: I remember at SHOT Show back when ASG introduced the ASG CZ Scorpion EVO 3 A1 6mm AEG Airsoft Gun, I was told indirectly that the construction was nearly identical to the real steel CZ Scorpion EVO at least cosmetically as all the internal parts will be specificities to Airsoft. That said this is a very high quality build with the material being for the most part the same as the original with Nylon Fiber PA6 Polymer reenforced plastics and even some CNC machined metal parts as in the outer barrel, flash hidden, barrel nut and even the gear box.
Realism: The ASG CZ Scorpion EVO 3 A1 6mm AEG Airsoft Gun is a bang on replica in terms of emulating the real steel CZ Scorpion EVO and has our weight and feel including a blot catch that locks back when out of ammo and most working components being ambidextrous.
Pros:
Build quality is almost exactly like the real steel version, super high quality materials.
Three shooting modes: semi auto, burst mode and full auto.
Decent mid capacity 75 round magazine with auto empty detection which locks the bolt catch.
Quad rail for lots of add on accessories.
Folding and adjustable stock that can also be removed.
Adjustable and removable iron sights with fiber optic up front and peep in the back.
Working charging handle for easy access to hop-up
Working bolt catch.
High quality electronic and gear box.
Ambidextrous controls for the most part.
Scorpion licensed through ASG.
Orange tip is fairly discreet.
Cons:
Battery compartment is small and hard for quick battery replacement, I recommend using an external setup if possible.
Price point is on the higher side but you get what you pay for.
Comments: On paper and just by looking over and inspecting the ASG CZ Scorpion EVO 3 A1 6mm AEG Airsoft Gun specs out and I am sure I will be pleased when I test it out in the Replica Airguns Indoor Shooting Range. That said this hasn’t happened yet so I will leave my final thumbs up until then. I do wish we had them in stock at the time of this video but there are a lot of other great ASG products in our store and of course many more brands of AEG Airsoft Guns. Hopefully we can get something like this in shortly for everyone so keep checking with us.
My Vimeo Table Top Review Videos for the ASG CZ Scorpion EVO 3 A1 6mm AEG Airsoft Gun:
In this Field Test Shooting Video I put the ASG Steyr Arms Scout Bolt Action Spring Airsoft Rifle through the regular Replica Airguns Indoor Field Test by first testing out the velocity and placing several rounds through my Chronograph to see what the actual fps is using both .20 gram and .40 gram Airsoft BB’s. Then I setup a fresh paper target 30 feet downrange and place 10 rounds into it to see how tight of a grouping I can get. If you have not already watched my Table Top Video for this Sniper Airsoft Riffle, then make sure to do so for more details, specifications and close up video.
Starting off with my real world velocity test for the ASG Steyr Arms Scout Bolt Action Spring Airsoft Rifle I decided to use both .20 and .40 gram Airsoft BB’s to see what a difference of double the weigth form the claimed for would actually be since for the most art this Airsoft Sniper Rifle is really meant to be using heavier Airsoft BB’ closer to the .40 gram weight. I was kind of expecting the heavier .40 gram BB’s to shoot almost half as fast since they where double the weight bu this was not the case! I shot 5 rounds with each weight Airsoft BB and with the .20 gram I averaged 479 which was actually faster than claimed, When I switched up to the .40 gram Airsoft BB’s I was surprised to get an average of 373 so only around 100 fps slower!
Moving on to the accuracy portion of my Indoor Field Test here in the Replica Airguns Sea Can, as always I placed a fresh paper target 30 feet downrange and proceeded to shoot 10 .40 gram Airsoft rounds into it from a rested and seated shooting position to allow for best possible results with as little human error added in. I was using a 4x optical scope since the ASG Steyr Arms Scout Bolt Action Spring Airsoft Rifle has a the added rail on top just fo this purpose and I would imaging most people are going to want to add a magnified scope to this Airsoft Sniper Rifle rather than use the built in pop iron sights that by the way are not adjustable. I know 30 feet is not the range one would be shooting this rifle at but it’s all I have for an indoor shooting range and it will give us an idea of what we can expect shooting further out… as in a nice tight group at 30 feet is going to mean better accuracy than a spread out grouping art 30 feet. I will say the ASG Steyr Arms Scout Bolt Action Spring Airsoft Rifle probably got one of the best groupings for an Airsoft Rifle that I have tested at 30 feet placing all 10 rounds within about an inch to an inch an a half.
I would like to take this Airsoft Sniper Rifle outside and see what it can do at much further out ranges again using nice and heavy Airsoft BB’s when it gets a bit warmer and stops raining so much :) But for now my Indoor Field Test performed about as good of a result as I can expect. The ASG Steyr Arms Scout Bolt Action Spring Airsoft Rifle is a really well made which paid off in two it performed for me. I don’t really see any need to upgrade this Airsoft Sniper Rifle other than adding an optical scope and perhaps investing in some high quality Airsoft Ammo.
Type: Airsoft Rifle. Distributer:ASG. Model:Steyr Arms Scout. Materials: Metal and polymer build. Weight: 6.5 pounds (2950 grams). Barrel: 14.5 inches (368mm), non-rifled. Total Length: 39.5 inches (1000mm) Propulsion: Spring Piston Action: Bolt action repeater. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: 32 round magazine. FPS: 443. Type: Black and Grey versions.
Trigger Pull: The trigger pull on the ASG Steyr Arms Scout Bolt Action Spring Airsoft Rifle is short light and crisp. Working the bolt precooks the trigger for single action only shooting allowing for just the release of the hammer. There is very little take up and no creep at all, just a nice light and predictable trigger pull.
Accuracy: I have not performed my Field Test Shooting Video for the ASG Steyr Arms Scout Bolt Action Spring Airsoft Rifle so stay posted for that. ASG claims around 4430 fps velocity with the preinstalled M140 spring, you can upgrade the spring all the way up to an M190 spring for even higher potential fps. In terms of accuracy I am also expecting good results so check back next week for my Indoor Field Test Shooting Video for the ASG Steyr Arms Scout Bolt Action Spring Airsoft Rifle.
Build Quality: The ASG Steyr Arms Scout Bolt Action Spring Airsoft Rifle is well built with lots of high quality component not only inside but also internally. You will find a metal barrel and receiver along with metal bolt, trigger and rear sight, the front sight is however plastic. I donate really thin k you will be using the pop sights all that much as they are not adjustable and this gun really begs for a nice optical scope. The nylon polymer stock has micro-texturing to help with the grip in all weather conditions.
Realism: The ASG Steyr Arms Scout Bolt Action Spring Airsoft Rifle is based on the real steel 7.62 NATO Steyr Scout and even incorporates the integrated folding bipod legs like the original. For the most part they look identical but you will find the actual magazine on the Airsoft version is placed further up the stock to allow for the feeding of the Airsoft BB’s which does make the actual inner barrel shorter by about 4-5 inches.
Pros:
Nylon Polymer stock with micro-texturing.
Railed metal receiver with laser-etched Steyr trademarks.
Integrated folding bipod legs on left and right sides of the stock.
Flip-up backup front and rear sights.
Accessory slot on bottom of stock for mounting of optional bipod rail.
Millet QD sling loop attachment points.
Front dummy magazine.
Rear dummy magazine with storage for a spare magazine.
Removable stock spacer pads for length-of-pull adjustment.
90 degree trigger with steel sear.
90 degree aluminum piston with dual glide rings and steel base.
Silent Air Brake piston head.
Silent cylinder head with shock-absorbing padding.
9mm stainless steel ball bearing spring guide.
Bore-up steel cylinder with 12.5% more air volume than stock cylinders.
Hop-up unit with both side-lever adjustment and TDC screw adjustment options.
Steel CNC-machined hop-up arm.
03mm tight-bore inner barrel.
60 degree Modify Predator enhanced hop-up bucking preinstalled (50 and 70 degree buckings available separately).
Compatible with VSR-spec inner barrels.
450 FPS with pre-installed M140 spring.
Can take up to a M190 spring with no upgrades needed.
Cons:
32-round magazine.
Recommended ammo: 0.36g BBs and above, 0.4g optimal.
Comments: I am looking forward to performing my Indoor Field Test Shooting Video for the ASG Steyr Arms Scout Bolt Action Spring Airsoft Rifle. I won’t be able to test it out perhaps as far range as I would like to since I will be shooting it in the Replica Airguns Indoor Shooting range which allows me to test at 30 feet. That should give me a good overall idea on at least what it may be capable of since if we can get a tight group at 30 feet we should also be able to get a tight group at longer ranges with proper hop-up and heavier BB selection. I do plan on placing a scope on the ASG Steyr Arms Scout Bolt Action Spring Airsoft Rifle to give it the best possible chance of performing at it’s best and really hope to see a good result from it.
My Vimeo Videos for the ASG Steyr Arms Scout Bolt Action Spring Airsoft Rifle:
In this Field Test Shooting Video I put the ASG Action Army T-11 Spring Powered Bolt Action Airsoft Gun through it’s paces by first testing out the velocity placing several rounds through my Chronograph, and then I setup a paper target downrange and place 10 rounds into it to see how tight of a grouping I can get. If you have not already watched my Table Top Video for this Airsoft Sniper Pistol/Rifle then make sure to do so for more details, specifications and close up video.
Starting off with my real world velocity test for the ASG Action Army T-11 Spring Powered Bolt Action Airsoft Gun, I decided to use .28 gram Airsoft BB’s for this entire Field test Shooting video so I was expecting to get somewhere between 20-25% slower fps velocity as compared to the standard tested .20 gram Airsoft BB’s. After placing around 6 shots through my Chronograph I averaged 328 fps which ended up being 18% slower than the claimed 400 fps made by ASG. I would image if I had used .20 gram Airsoft BB’s I may have even exceeded 400 fps.
Moving on to the accuracy portion of my Indoor Field Test here in the Replica Airguns Sea Can, as always I placed a fresh paper target 30 feet downrange and proceeded to shoot 10 rounds into it from a rested and seated shooting position to allow for best possible results with as little human factor added in. I was using a 4x optical scope since the ASG Action Army T-11 Spring Powered Bolt Action Airsoft Gun does not come with any type of sighting system included so I did have to sight it in initially. I did manage to get a nice 1.5 inch grouping fairly close to the bullseye but I did notice that if I angled the barrel down a bit, BB’s would roll out of the barrel which made me wonder if the hop-up was set high enough to engage a BB.
So I did my second test with the hop-up set in the middle range and this time BB’s did not fall out of the barrel when angled down. After the hop-up adjustment I did notice I was shooting a bit higher which is expected with more hop-up adjustment so if you are experiencing BB’s falling out of the barrel then make sure to adjust your hop-up a bit tighter.
All in all the ASG Action Army T-11 Spring Powered Bolt Action Airsoft Gun performed very well for me especially once I got the hop-up figured out. And I do think it makes for a really nice compact Sniper Rifle if bulkiness is a factor for you, if not then checkout the Rifle version of this gun with the more traditional but-stock and longer barrel.
