This is part three of my three part Indoor Filed Test Shooting Video for the Umarex T4E P2P HDP 50 Gen 2 CO2 Less Lethal Pistol. In this third video I test out the velocity and energy shooting 5 rounds through my Chronograph using the 8 gram All Steel Balls that I purchased on my own to test with this Less Lethal Pistol. I also shoot 5 rounds of the same All Steel Balls into a paper target setup 30 feet down range to get an idea on what to expect accuracy wise with the Umarex T4E P2P HDP 50 Gen 2 CO2 Less Lethal Pistol. I have already uploaded Field Test Shooting Videos one and two where I test out 1.6 gram All Rubber Balls and 2.7 gram Rubber/Steel Balls. If you have not watched my Table Top Video for the Umarex T4E P2P HDP 50 Gen 2 CO2 Less Lethal Pistol, then make sure to do so for closer up video and all the specifications and details.
Umarex claims a max velocity of 485 fps with an energy rating of 13 Joules with the Umarex T4E P2P HDP 50 Gen 2 CO2 Less Lethal Pistol when using their supplied ammo. I am assuming this would be using the Powder Balls as they are the lightest option of Ammo that are included in the box with this pistol and will have the highest velcoity. In my Chronograph testing I shot 5 rounds using the 8 gram All Steel balls. The velocity for the 8 gram All Steel Balls was much slower than the 1.6 gram All Rubber Balls and 2.7 gram Rubber/Steel Balls as expected, but they did stay fairly consistent ranging from a low of 132 fps to a high of 151 fps, averaging 138 fps. The overall energy rating ended up being the slowest by far out of all the rounds I tested in this Less Lethal Pistol, with an energy rating of only 7 Joules. Based on energy alone I would suggest using the All Rubber Balls as they achieved the highest energy rating at 15 Joules, even higher than claimed by Umarex.
Now that we understand that the 8 gram All Steel .50 Caliber All Steel Balls are not only the lowest velocity by a long shot, they also have the lowest energy rating again by a lot as compared to the other rounds tested. Maybe when I compare the accuracy during my target Test the .50 Caliber All Reel Rounds may redeem themselves. After Shooting 5 of the 8 Gram All Steel Rounds into my Paper Target from a distance of 30 feet, I did actually get the tightest grouping, even with a heavily fading CO2 that was near it’s end, so velocity did taper off making the shots shoot lower and lower with each shot. I did throw the final 5th shot out as I could literally see it loft to the target but even with the low CO2 and inconsistent velocity, I got my best grouping from the Umarex T4E P2P HDP 50 Gen 2 CO2 Less Lethal Pistol with a 3 inch grouping just slightly to the left of the bullseye but very close.
I was not surprised with the performance of the Umarex T4E P2P HDP 50 Gen 2 CO2 Less Lethal Pistol using the 8 gram All Steel Balls for this third Field Test. Velocity was much lower as expected than the other lighter rounds tested, but most surprising, the energy was around half of the All Rubber Balls. Perhaps the metal rounds just did not reach their maximum speed in such a short barrel due to them being a so much heavier weight? My conclusion on Ammo choice for the Umarex T4E P2P HDP 50 Gen 2 CO2 Less Lethal Pistol would be to go with either the All Rubber Balls or the Rubber Steel Balls. The All Rubber Balls by far had the highest velocity and energy rating but I did feel like the Rubber Steel Balls even though they where moving slower and had slightly less energy, seemed to hit the target with the most force based on the sound I was hearing while performing the testing. Either round will for sure make an intruder think twice about continuing their course of bad behavior. I will probably do some testing on how each of these rounds effects different targets in the future, I just need to figure out what I want to shoot at…
This is part two of my three part Indoor Filed Test Shooting Video for the Umarex T4E P2P HDP 50 Gen 2 CO2 Less Lethal Pistol. In this second video I test out the velocity and energy shooting 5 rounds through my Chronograph, using the 2.7 gram Rubber/Steel Balls that I purchased on my own to test with this Less Lethal Pistol. I also shoot 5 rounds into a paper target setup 30 feet down range to get an idea on what to expect accuracy wise with the Umarex T4E P2P HDP 50 Gen 2 CO2 Less Lethal Pistol. In video three I plan to test out the 8 gram all Steel Balls to see they are a viable option with a CO2 Pistol like this designed for much lighter rounds . If you have not watched my Table Top Video for the Umarex T4E P2P HDP 50 Gen 2 CO2 Less Lethal Pistol, then make sure to do so for closer up video and all the specifications and details.
Umarex claims a max velocity of 485 fps with an energy rating of 13 Joules with the Umarex T4E P2P HDP 50 Gen 2 CO2 Less Lethal Pistol when using their supplied ammo. I am assuming this would be using the Powder Balls as they seem to be a bit lighter than the Rubber Balls and will have the highest velcoity. In my Chronograph testing I shot 5 rounds using the 2.7 gram Rubber/Steel balls. The velocity for the 2.7 gram Rubber/Steel Balls was slower as expected but they did stay fairly consistent ranging from a low of 300 fps to a high of 309 fps averaging 304 fps. The overall energy rating ended up being 12 Joules, so obviously lower in fps than claimed by Umarex but close to the claimed 13 Joules. Still a good result close to the claimed raw energy.
The main point to this ammo comparison video is to finds out not only if the heavier 2.7 gram Rubber/Steel Balls will have around the same energy as the lighter 1.6 gram all Rubber Balls, but also to see if they have similar accuracy. In terms of accuracy the 2.7 gram Rubber/Steel Balls did just a little bit better than the 1.6 gram all Rubber Balls, not by a lot but, by about 1 inch with a 5 round grouping of 5 inches. All 5 shots were well entered shooting just a bit high of my aim point by about 3 inches but in general well centered left to right as a grouping.
I was happy with the performance of the Umarex T4E P2P HDP 50 Gen 2 CO2 Less Lethal Pistol using the 2.7 gram Rubber/Steel Balls for this second Field Test. Energy was very close to the claimed 13 Joules and the average 304 fps I got with this ammo felt snappy and got to the target quickly and sounded like they really hit hard. I do like the higher 15 Joules and 450 fps I got from the lighter 1.6 gram all Rubber Balls, so at this point I would probably recommend sticking with them for the most power and energy down range. Next up I test out the 8 gram all Steel Balls to find out if they are even an option or if they are simply juts to heavy for the Umarex T4E P2P HDP 50 Gen 2 CO2 Less Lethal Pistol.
This is part one of my three part Indoor Filed Test Shooting Video for the Umarex T4E P2P HDP 50 Gen 2 CO2 Less Lethal Pistol. In this first video I test out the velocity and energy shooting 5 rounds through my Chronograph, using the 1.6 gram included Rubber Balls that came with it and then I also shoot 5 rounds into a paper target setup 30 feet down range to get an idea on what to expect accuracy wise with the Umarex T4E P2P HDP 50 Gen 2 CO2 Less Lethal Pistol. In video two I will be testing out the 2.7 gram Rubber/Steel Balls in the same way, and then in video three I will be testing out the much heavier all steel 8 gram rounds to see if they are even usable in a CO2 Airgun designed for much lighter rounds. If you have not watched my Table Top Video for the Umarex T4E P2P HDP 50 Gen 2 CO2 Less Lethal Pistol, then make sure to do so for closer up video and all the specifications and details.
Umarex claims a max velocity of 485 fps with an energy rating of 13 Joules with the Umarex T4E P2P HDP 50 Gen 2 CO2 Less Lethal Pistol. In my Chronograph testing I shot 5 rounds using the 1.6 gram included all rubber balls. I did throwout the first shot as it was about 50 fps lower than the rest, perhaps as it was first out of the barrel which can happen. The other 4 rounds averaged 445 fps with an overall energy rating of 15 Joules, so a bit slow in fps than claimed by Umarex but a higher energy output. Perhaps the fps rating was for lighter rounds like the included 10 powder balls? Still an excellent result with more raw energy than expected which is great for a system designed to deter an intruder!
What good is power if you can not hit the target? That’s why I always test out accuracy as you want your gun to shoot where you point it. With Rubber Balls they tend to “wing” or “curl” a bit in the air which does spread out the groupings a bit over a BB or even Airsoft gun, so I was not expecting under a 2 inch grouping. My goal was to hit the target fairly centered with around a 6 inch grouping and the Umarex T4E P2P HDP 50 Gen 2 CO2 Less Lethal Pistol did exactly that for me, so mission accomplished. I also wanted to find out how many shots to expect from a fresh 12 gram CO2 and my results showed around 20 shots, so you can reload the internal magazine around 4 times before the trigger stops working, which is how you know the CO2 pressure is not adequate enough to shoot any more rounds.
I was very happy with the performance of the Umarex T4E P2P HDP 50 Gen 2 CO2 Less Lethal Pistol using the included 1.6 gram All Rubber Balls for this Field Test. Energy was even 2 Joules higher than claimed by Umarex, and I did not have a single malfunction with this pistol through my testing of all types of ammo I used in videos 1, 2 and 3. I would say the Umarex T4E P2P HDP 50 Gen 2 CO2 Less Lethal Pistol is your best option as a Less Lethal Pistol here in Canada. Will it stop a very determined intruder? Maybe not, but I would feel a little bit safer with the Umarex T4E P2P HDP 50 Gen 2 CO2 Less Lethal Pistol at my side than not having it at all. And a couple well aimed rounds to some soft tissue will for sure make someone reconsider some of their life choices. Stay posted for videos two and three coming out shortly…
Type: Less Lethal Pistol. Manufacturer:Umarex - T4E. Model:P2P HDP 50. Materials: Metal & Polymer. Weight: 1.5 pounds (.7 kg). Barrel: 4 inches (10.2 cm) Smooth bore. Total Length: 8.5 inches (21.6 cm). Power Source: 1x12 gram CO2. Action: Semi auto - Double action only trigger. Ammo Type: .50 Caliber Rubber Ball, Pepper Ball, Powder Ball. Ammo Capacity: 6 Round spring fed internal magazine. FPS: 485 (13 Joules).
Trigger Pull: The trigger pull on Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol is double action only but not overly long or heavy. There does not seem to be any ammo friction which is nice, so the each round feels about the same with spring tension not playing a factor. In order to use the trigger, the Pistol will need to be fully charged by loading a 12 gram CO2 and giving it a smack on the bottom of the pistol grip. This will pierce the CO2, charging the gun with pressure and activation the trigger mechanism. When the CO2 pressure becomes too low, the trigger will not function and a fresh CO2 will needed to be swapped over.
Accuracy: So far I have only briefly tried out the Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol here in the Replica Airguns Indoor Airgun Shooting Range, and I was rather impressed at the initial performance as it did seem to be moving the .50 call rubber balls I was shooting at close to 500 fps with a lot of energy as my pepper and cardboard target was dislodged from the backstop after a few shots. Accuracy seems to be as expected from a Paintball type pistol, so I am expecting to get around a 4-6 inch 6 shot grouping at 30 feet away which will be effective in a Less Lethal encounter.
Build Quality: The build quality of the Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol is good overall. It is mostly made out of plastic which is fine, as I feel that if it was mostly metal, and because of its larger size, it would be on the heavy side and not something you may want to use in a cary situation if that was your plan. There is metal where it needs to be in most of the mechanical areas including the barrel, trigger, charging system and I am sure other internal parts. The plastic parts feel well made and fit and finish is very good. The Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol does have more than enough weight at 1.5 pounds to feel solid in the hand.
Realism: This version of the Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol comes with the orange slide to show that it is not a lethal firearm. I have seen all black version but at this time we only sell the colored slide version. This does make it obvious that the Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol is not a “Real Firearm” designed for lethal encounters, which in Canada is a good thing since our self protection laws seem to favor the criminal more than the victim. So making sure you are using a tool designed to deter a criminal rather than harm or kill them, is hopefully going to keep you out of trouble with the law. That said the Umarex P2P HDR 50 Gen 2 CO2 Less Lethal Pistol does look like a modern semi auto pistol and functions much the same but with less force.
Pros:
Not many options for a true less-lethal option here in Canada. This Airgun is purpose built for less lethal use so it has what I believe is enough power to actually dissuade most intruders.
In this case I like that it is clearly marked in orange to indicate it is not an actual lethal firearm. When protecting yourself in Canada you have to be cautious with your intentions, and having clear orange markings will help in your case to show that you where not trying to give the impression of using a real firearm.
Nice powerful 485fps with a 13 Joules energy rating.
Can store the 12 gram CO2 in it and activate with a quick hit to the bottom of the CO2 screw.
Holds 6 rounds in the internal magazine which hopefully gets the job done. Should be able to reload at least one more time for a total of 12 shots per 12 gram CO2.
Fiber Optic sights make it easy to line up your target in most lighting conditions and backgrounds.
Double action trigger feels smooth and not too heavy or long, also has a trigger safety on it.
Can add a tactical light or laser to the under barrel picatinny rail.
Comes with 10 rubber and 10 powder balls to get you started.
Cons:
It is a bit on the larger size, not going to be easy to cary if that is your plan. I do not know what the legal ramifications of carrying this would be as it is clearly designed for protection and not for lethal encounters.
Not a lot of shots per CO2 but the idea here is to quickly deliver as much damage as possible, this is not a weapon for prolonged gun fights.
In Canada it does not seem you can get pepper balls easily most likely due to import regulations.
Comments:
The Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol is a very refreshing product for us here in Canada as up until now similar styled Rubber Ball purpose built self defense products we have been able to get, in my opinion simply did not have enough power to really be effective other than the initial intimidation of holding what looks like a firearm. If it came down to actually shooting it, I don’t believe there would be enough stopping power to deter an intruder. The Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol on the other hand has a 485 fps, 13 Joules power rating which is a rather big jump from other similar products available to us here in Canada and although it may not stop everyone, I do believe you have a much better chance protecting yourself with the Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol. If you are looking for something to have at home to help you feel a bit safer, then the Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol is the absolute best option for Canadians at this time.
This was a really fun Unboxing Video for me as I received something I feel a lot of Canadians might be really interested in protecting yourself in Canada is not a right especially if you use lethal force. So having a less lethal option is a really good idea.
Let’s get into what I found in this most recent Mystery Box in order of appearance…
The first item I unboxed was the KWC SP2022 CO2 NBB 4.5mm Steel BB Pistol. A pretty basic 4.5mm CO2 BB Pistol mostly made out of plastic but with a full size 21 round drop out metal magazine that does help a lot to add some much needed weight to this Airgun. It uses standard 12 gram CO2 with a claimed velocity of 450 fps.
Probably the most exciting item I pulled out of this months Mystery Box was the Gen2 Umarex P2P HDP 50 Rubber Ball purpose built Less-lethal solution for personal and family protection. Most of the similar Rubber ball Less-lethal Airguns I have tested generally do not pack enough punch to really be much of a deterrent in my opinion but the Gen2 Umarex P2P HDP 50 has a claimed 495 fps and when I tested it out after making this video it defiantly has some power. I would not want to be at the receiving end of this product especially in close proximity. The Gen2 Umarex P2P HDP 50 uses a traditional 12 gram CO2 and holds 6 rounds of rubber ball or powder ball, it does come with 10 of each to get you started.
Next I took a look at three KJWORKS Airsoft Pistols all of which came with CO2 Magazines, extension barrels and thread on tips. The KJWORKS KP-19, the KJWORKS M9A1 TBC, and the KJWORKS KP-13 TBC. As expected with KJWORKS Airsoft Guns, they looked really good and will be a joy to review and test out.
Last out of the Mystery Box was a new product from Umarex, a full sized Marlin Cowboy Lever Action BB Rifle in the style of the classic Red Ryder BB Gun but as mentioned in a larger size more suitable for an adult. Hey why do the kids get to have all the fun? The Umarex Marlin BB Rifle holds 650 rounds in its BB hopper and has a claimed fps pf 300. It also has an adjustable for elevation peep sight in the back with a metal lever and a Classic Faux Wood Finish.
You may have noticed a lack of Airgun Video Reviews last week? That is because I went on vacation with my buddy Steve to Oceanside California where we stayed at the WorldMark Oceanside Resort. We spent a full week in Oceanside visiting the surrounding beaches, Mission Beach in San Diego along with Laguna Beach and Newport Beach.
We had a really great time, I was able to capture a variety of video of some of our experiences using my Samsung Galaxy S24 Ultra, My DJI Neo AI and FPV Drone, and my Meta Glasses. I have put together a video to share Oceanside California and surrounding area in a mostly chronological order for your viewing enjoyment.
I am back to making Airgun Review Videos so stay posted for those videos coming shortly…
Type:AEG Airsoft Rifles Manufacturer: G&G. Model:RK Beta AK Materials: Mostly metal/some plastic. Weight: 7.1 pounds (3.2 kg). Total Length: 28.5 inches (72.4 cm). Barrel: 9 inches (22.9 cm) barrel non-rifled. Propulsion: AEG. Action: Single action semi & full auto. Ammunition Type: 6mm plastic Airsoft BB’s. Ammunition Capacity: High cap 600 round magazine. FPS: 390 fps.
Trigger Pull: The trigger pull on the G&G RK Beta AK AEG Airsoft Rifle is short and light as it is basically a simple electric on/off switch that completes a circuit and tells the motor to turn, which activates the cycling of the spring piston. For this reason there is no real creep or feel of a release. When you get to a preset point in the trigger, the motor circuit is closed allowing for either semi or full auto, depending on your selector switch position at the time.
Accuracy: I will be making a dedicated Field Test Shooting Video for the G&G RK Beta AK AEG Airsoft Rifle to find out what the actual velocity is in fps. I will also test what kind of accuracy I can get shooting a paper target in both semi and full auto from 30 feet away. For now I have no idea what to expect but as this is most certainly not a cheap Airsoft AEG Rifle, I am hoping for good results to justify the higher price point.
Build Quality: The build quality of the G&G RK Beta AK AEG Airsoft Rifle is very good, G&G Airsoft Rifles in general are well built. You are going to find metal in most of this AEG Airsoft Rifle including the receiver, dust cover, trigger guard, trigger, selector switch, barrel, front and rear sights and the magazine. The only plastic to be found will be in the pistol grip, rear stock and 3 of the picatinny rails. Fit and finish is very good but the stock and pistol grip material does seem to show scratches really easily.
Realism: The G&G RK Beta AK AEG Airsoft Rifle is a 1 to 1 scale Airsoft reproduction of the AK 47/74 in a compact modernized version. I don’t believe it is based on exactly one specific brand or type of AK 47 or AK 74, but is more or less a stylized version designed and built by G&G. The G&G RK Beta AK AEG Airsoft Rifle does have a lot of metal and weight to it adding to the realism and most of the mechanical parts work similar to a real steel version of an AK 47/74. G&G has added a bit of a bolt cycle motion with a motor that actuates it to some degree but this is not like the look and feel of a real internal bolt from an actual AK 47/74. Still a nice touch.
Pros:
Lots of metal in construction where you need it with good overall weight and feel.
6 rail attachment options up front for lots of mounting positions.
Left side option to attach an additional AK style sight mount.
Adjustable front sight for elevation.
Nice and compact for easy maneuverability.
Rear stock has lots of room for battery sizes and options.
Dust cover comes off for easy access to internals.
G&G high quality build.
Comes with sling mounting options.
Super easy hopup adjustment slider.
Nice high capacity 600 round metal magazine.
No orange tip.
Cons:
Rear sight is all but useless.
Stock and grip scratch really easily.
Priced on the higher side.
Comments:
The G&G RK Beta AK AEG Airsoft Rifle may be priced a bit on the high side for some people but it is a solid AEG Airsoft Rifle and it seems there are not as many AK options out there so it is nice to have an offering from G&G. I like the almost full metal construction and I find the modernized styling and compact size to be appealing and would make it a great option for CQB Airsoft games. I am not sure what is going on with the rear site, as it looks like it is a sight, but does not have the sight grove in it? Maybe I am missing something here but other than opting to put a red dot way up front, your only other option is to put an AK side rail and mount a sight on the rear just above the metal dust cover. I am hoping when I make my Field Test Shooting Video for the G&G RK Beta AK AEG Airsoft Rifle, it performs well for me to justify the higher price point.
My Vimeo Table Top Review for the G&G RK Beta AK AEG Airsoft Rifle:
I have reviewed a few other Umarex T4E .43 Caliber Paintball Airguns in the past so if you have watched any of those than you already have a pretty good idea what to expect from the Umarex T4E PDP Compact Walther .43 Cal CO2 Blowback Paintball Gun. As with all my Field Test Shooting Videos I first test out the velocity in fps shooting 5 rounds through my Chronograph and averaging them out. I then place a full magazine generally into a paper target setup 30 feet down ranged see what the accuracy looks like. Make sure to also watch my Table Top Video for the Umarex T4E PDP Compact Walther .43 Cal CO2 Blowback Paintball Gun for more information about specifications, details and some close up video.
For my velocity test I placed a brand new 12 gram CO2 in the Umarex T4E PDP Compact Walther .43 Cal CO2 Blowback Paintball Gun and shot 5 rounds through my Chronograph, getting an average fps of 322. The fastest shot hit a velocity of 331 fps with the slowest shot hitting 311 fps so all pretty close together. I was using standard .43 caliber rubber balls as they are a lot less messy here inside the indoor sea can Airgun shooting range. I didn't check the temperate but generally I keep iti comfortable, so around 20 degrees Celsius or 68 degrees Fahrenheit.
Next up I shot a full magazine which is 8 rounds for the Umarex T4E PDP Compact Walther .43 Cal CO2 Blowback Paintball Gun. Paintball guns are not known for their accuracy but I was impressed with the base grouping I got from the Umarex T4E PDP, It shot really well centered with 6 rounds all within about 3 inches of each other. 2 rounds did “wing out” a bit increasing the grouping to closer to about 6 inches but still a good grouping from a paintball gun design not so much to be super accurate but to be able to hit human sized targets ate realistic ranges which it does do very well.
I am not sure if this is the best test result for an Umarex T4E Paintball Airgun I have ever done but for sure it is one of the best for what I remember. Velocity was right on the mark and accuracy was again very good. I would be very confident in the performance of the Umarex T4E PDP Compact Walther .43 Cal CO2 Blowback Paintball Gun out in the field. I also think it is one of the nicer looking Umarex T4E .43 Caliber Paintball Pistols but if you are more of a Glock or S&W person there are options form Umarex for you too so make sure to check out our selection of Paintball Airguns over on our our Canada and US Replica Airgun Stores.
In this Field Test Shooting Video conducted in the Replica Airguns Sea Can indoor Shooting Range, I test the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol’s power in velocity using my Chronograph along with the accuracy shooting at a Paper Target setup 30 feet away. If you are also interested in details, specifications and more close up video of the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol, then make sure to watch my Table Top Video I already made for it here…
When I placed 6 pellets from the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol through my Chronograph, I removed the fastest and slowest recorded shots, and got an average of 290 fps, there was a fairly big range in fps as some dieseling may have been occurring, since this Pellet Pistol had not been shot before and there may have been some oils in the barrel. Here are my recored velocities for all 6 shots: 213, 286, 308, 270, 304, 298. I was using lead flathead pellets that weighed 8.2 grain each. So you will for sure get much higher velocities using 5 grain alloy pellets, probably very close to the 400 claimed fps.
Moving on to my accuracy test, the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol did pretty good. I was not sure how it would shoot for me as the trigger is pretty firm, which can cause the shooter to pull a shot or two. I was able to keep my shots pretty consistent with perhaps one shot getting a bit away from me. That said, out of the 10 shots I placed on the paper target setup 30 feet down range, I managed to get 9 of them all within about 2 inches of each other with the larger spread being elevation, windage was within about 3/4 of an inch, so consistent velocity may have played a roll here. I did use a semi rested shooting position with my hands resting on a sand bag up front, and sitting on a stool in the back to help stabile me as much as possible. I was happy that out of the box the aim point was pretty well centered just a bit to the right if anything.
All in all the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol performed as much as I could have expected for a $50 Canadian low cost pellet shooter. I really wish an add on sight of some sort was possible, as there does not seem to be anyway of adjusting the sights on the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol, so hopefully yours shoots well centered for you also. I do not recommend this Air Pistol for people with smaller hands as it is a bulky Airgun with very wide and large grips. The trigger also does take a bit of finger strength so not a gun for younger shooters perhaps. For the price it is a very unique Pellet Pistol with a very modern and futuristic look to it which may or may not appeal to everyone.
Type: Pellet Pistol. Manufacturer:Umarex Model:Markpoint. Materials: Mostly plastic with some metal. Weight: 1.79 pounds (812 grams). Barrel: 9.75 inch (24.8 cm) Rifled steel barrel. Total Length: 17 inches (43.2 cm). Power Source: Spring piston. Action: Break Barrel - Single Action Only. Ammo Type: .177 caliber pellets. Ammo Capacity: Single shot. FPS: 395 with alloy pellets, 300 with lead pellets.
Trigger Pull: The trigger pull on Umarex Markpoint Break Barrel .177 Cal Pellet Pistol is single action only and you will have to break the barrel and fully cock it to activate the trigger in order to shoot it. You will have to also insert a pellet for each shot when the barrel is in the open position. The trigger itself is a bit on the heavy side with a short takeup. It is not super heavy but I would not consider it light or even medium weight. There is a grip safety that needs to be pressed in at the back of the grip, or the trigger will not function. This is a nice additional safety feature.
Accuracy: So far I have not had the opportunity to test the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol, but the plan is to get to my Field Test Shooting Video shortly and see how it performs in terms of power and accuracy. The Umarex Markpoint Break Barrel .177 Cal Pellet Pistol does have a nice long rifled steel barrel so it has the potential to be very accurate. My main concern is with the sights as they are none adjustable and if it is not well centered out of the box then the only way to adjust it will be by adjusting your aim point to correct any off center shots. There is also no way that I can see to mount a red to or scope of some sort. It looks like there is a rail system on the barrel but it is just cosmetic and there is no way to mount a picatinny accessory to it. I am not sure why Umarex simply did not make the rail a true picatinny rail?
Build Quality: For around a $50 Canadian pellet pistol that has the potential to be a pretty decent entry level target pistol, the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol is pretty well made and feels very solid and mechanically tight. It is mostly plastic but does not feel cheap at all. It is a rather large pistol, especially the grips being fairly wide, so for people with small hands, it may be a bit hard to hold.
Realism: The Umarex Markpoint Break Barrel .177 Cal Pellet Pistol is not a copy or replica of any real steel pistol in production that I know of. To be honest Umarex was not trying that hard to make it look like a real steel pistol as it has it’s very own look to it that I would say is modern and kind of futuristic looking. It for sure has its own style to it, and you are either going to like it to not? I do like that Umarex added the ejection port and vented barrel which does add to the cool factor and makes it feel more like a real gun.
Pros:
Feels well built and solid.
Overall look is good, kind of futuristic if you like that sort of thing.
I like the red highlights, not typical on a real steel gun but looks good on this design.
Expect it to have good accuracy, hope the sights are on point?
Easy to cock spring piston system.
Sights are easy to line up .
Grip safety is a nice safety feature.
Fake ejection port is a nice touch, not something you would normally see on a target pistol like this.
Nice low price tag for some fun target shooting.
Cons:
Trigger is a bit heavy but in terms of length and break is OK.
Sights are not adjustable and no way to add a red dot or other sighting system.
Grip may be a bit wide for smaller handed shooters.
Comments:
For me I think the deciding factor on how I feel about the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol is going to come down to how it performs as I have my reservations on how accurate it is going to be and if it shoots true out of the box. I really hope the sights are dialed in out of the box since there is no way to adjust them or add a red dot or other sighting system. The heavy trigger will take a bit of getting use to also but once adjusted to it I should be able to get some decent groupings. For the price, if it turns out to be a decent shooter and you like the look of it, then by all means it would make a great target plinker that you should be able to get proficient at shooting with. I will leave my final thoughts for the Field Test Shooting video on this one…
Type:Paintball Gun. Manufacturer:Umarex - T4E. Model:Walther PDP. Materials: Metal & Polymer. Weight: 690 grams (1.52 pounds). Barrel: Smooth bore. Power Source: 1x12 gram CO2. Action: Semi-Automatic with blowback action. Ammo Type: .43 Caliber Paintball or Rubber Ball. Ammo Capacity: 8-9 Rounds. FPS: 300.
Trigger Pull: The trigger pull on the Umarex T4E PDP Compact Walther .43 Cal CO2 Blowback Paintball Gun feels a lot like a double action trigger in length of pull and weight. When you pull the trigger back, there is an inner barrel that retracts back into the magazine sealing off a Paintball for more efficient CO2 usage, but this does cause some trigger drag and friction. There is also a working trigger safety which is a nice safety feature.
Accuracy: So far I have not had the opportunity to test the Umarex T4E PDP Compact Walther .43 Cal CO2 Blowback Paintball Gun out, so stay posted for a future Field Test Shooting video where I will see what kind of fps and accuracy we can expect from it. I have made a Field Test Shooting Videos for the Umarex T4E Walther PPQ M2 CO2 Blowback .42 Caliber Paintball Pistol so have a watch of that video as the performance of the Umarex T4E PDP Compact Walther .43 Cal CO2 Blowback Paintball Gun should be about the same.
Build Quality: The build quality of the Umarex T4E PDP Compact Walther .43 Cal CO2 Blowback Paintball Gun is really very good, metal parts are where you would expect them to be, as in the slide, slide catch, barrel, magazine and most internal parts. This gives the Umarex T4E PDP Compact Walther .43 Cal CO2 Blowback Paintball Gun a nice 1.5 pound weight to it with the magazine in which makes the Paintball version pretty close to the real still version. The Umarex T4E PDP does have a polymer frame but again this is normal with todays modern guns and helps keep the weight down. Fit and finish is also excellent.
Realism: The Umarex T4E PDP Compact Walther .43 Cal CO2 Blowback Paintball Gun is a very close replica of the real steel Walther PDP, from the fully licensed trademarks to the large .43 caliber diameter barrel. If you placed the Paintball version side by side with the real steel version, I doubt you would be able to easily tell them apart without actually handling them? You will find that the slide cycle distance is a much shorter than it would be with the real steel version, meaning that when the side cycles rearward or the slide catch is engaged, the slide does not go as far back as it should. Filed stripping the Umarex T4E PDP Compact Walther .43 Cal CO2 Blowback Paintball Gun will require tools however.
Pros:
Really great weight and solid feeling gun.
Full Metal slide that locks back on the last shot.
All metal heavy full size drop out magazine adds some additional weight to the pistol.
Very Accurate Walther PDP replica, almost indistinguishable from the real steel version until you really examine it up close.
Everything works pretty much like the real gun so a great training tool.
White dot sights front and back, rear sight is adjustable for windage.
Working trigger safety.
Fit and finish is excellent.
Magazine spring release really shoots the magazine out making it easy to grab.
Can mount a red dot on the rear of the slide and comes with lots of mounting plate options.
Comes with a nice hard shell case for storing it in and locking it up.
Love the .43 caliber barrel opening, adds to realism.
Cons:
The trigger is a bit long as it shoots more like a double action trigger.
Magazine only holds 8-9 rounds, so you are going to need extra magazines or get quick at reloading.
Blowback action is not full blowback, more like a typical partial blowback CO2 BB airgun.
Comments:
Umarex and T4E working together have put out a nice line of .43 caliber CO2 Blowback Replica Paintball Training guns focusing on the Walther, Glock and HK Brands as Umarex holds a license with all of these gun manufactures. The realism is excellent not only in looks but also in function making their use as training weapons that much more valuable. If you are looking for the most realistic Replica Paintball Pi thenstol, Umarex T4E products are your best option and it is nice that we now have several models to choose from that may coincide with your standard side arm of choice.
In this Field Test Shooting Video for the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle, I get to test out a Replica .22 Caliber CO2 Rifle which I don’t get the chance to do so very often and .22 caliber combined with a Replica in a an Airgun is very uncommon! Well today I got to test one out and it was a lot of fun, I would say it performed very well for me. As usual, my main goal is to find out what the real world velocity is in fps and also to see how accurate the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle is shooting at a paper target 30 feet away. Also make sure to checkout my Table Top Video for the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle for more details and specifications and close up video.
First in my to-do list was the velocity portion of my Field Test, and so I loaded up dual 12 gram CO2 cartridges into the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle along with 10 preloaded .22 caliber shells. By the way I was using Gamo 15.43 grain (1 gram) lead pellets and the temperature was just a bit below room temperature, so not 100% ideal for maximum velocity but still warm enough for my purposes. The Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle shot an average 5 shot velocity of 390 fps with the fastest shot hitting 411 fps and the slowest performer hitting 370 fps. That works out to 5.78 average foot pounds of energy.
Next up, I first recovered the 5 ejected shells I used in the velocity test, and again reloaded them with some more pellets and then back into the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle for my accuracy test. Keep in mind with a lever action rifle, I have to remove the rifle from my shooting position each time to work the lever action and chamber a round. This does cause me to have to fully reset for each shot which does kind of break a shooting grove just a bit, but it did not seem to make much of a difference as my accuracy results where still very good. I did notice vertically the grouping was about 2 inches while side to side it was closer to 1 inch. I attribute this to the sighting system as it was hard for me to focus on the rear sight and make sure I had it perfectly level with the front sight for each shot, which would account for some variation in elevation. The Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle was also shooting about 2 inches high from my aim point.
I have said this a bunch of times before, but I do really love shooting lever action rifles. Even a low cost Red Ryder BB Rifle brings a smile to my face. I also have a Henry Lever Action 22LR that I also really enjoy shooting when I get the chance. The Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle is a really sweet looking rifle that performs as good as it looks thankfully! It’s also well priced for what you get in my opinion at just under $300 Canadian at the time of this video. If you want a fairly powerful Replica Air Rifle that hits hard and true and is super fun to shoot then get this one but make sure to get a bunch of extras shells cause they like to disappear on you pretty quickly. For now I still have all 10 of mine but they love to hide in the craziest places when they get ejected :)
In this Indoor Field Test Shooting Video, I put the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol through my usual performance shooting test by first finding out what the velocity is by shooting 5 rounds through my Chronograph using a fresh CO2 along with .20 gram Airsoft BB’s. I follow this up with a 10 round accuracy test, again using .20 gram Airsoft BB’s and shooting at a paper target setup 30 feet down range, while seated on a stool in the back with my hands rested on a sand bag up front. This generally works pretty well and helps me get the most out the gun I am testing. If you are also interested in details and specifications than make sure to watch my Table Top Video I already made for the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol.
So how did the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol do in my testing? Not bad! Starting with the velocity fps test I shot 5 rounds through my chronograph with a brand new 12 gram CO2 cartridge and while EMG claims around 400 fps, I only averaged 321 fps with my fastest shot hitting 323 fps and my slowest shot hitting 318. So relatively close in terms of fps but not close to the 400 claimed fps. Totally fine for Airsoft games, perhaps in super hot temperatures, it can do better but in standard room temperatures this is what I got.
Next up I tested out the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol’s accuracy from 30 feet away and put 10 rounds down range as best as I was able to do with my slightly aging eyes. I was happy with the results with most of the rounds staying within about 2 inches of each other and just slightly to the right of the bullseye, but pretty much perfect in terms of elevation. There where a couple of rounds that came outside of the base 2 inch grouping, which increased the grouping to about 3 inches total.
I am a huge 1911 fan and so a 2011 design only tuns up the dial that much more. The EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol performed without a glitch for me and I love the extra heft and snappy blowback action along with the crips light and short single action 1911 trigger. I was a bit surprised by the lower 323 fps velocity, but to be honest this is more than a capable velocity for a combat close range Airsoft Pistol. The EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol is a real looker for sure, it just needs that eye soar of an orange tip removed to perfect its look. If you like the look and feel of a 1911/2011 in your hand, and if stainless steel is your color of choice, then I would say go for this one.
Type: GBB Airsoft Rifle Manufacturer:Umarex / KWA Model:HK 416 A4 Materials: Mostly all metal. Weight: 7.75 pounds (3.5 kg). Total Length: 31.1-34.4 inches (79-88cm). Barrel: 15.4 inches (39cm) non rifled. Propulsion: Gas Blowback. Action: Single action semi & full auto. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity:30 round magazines. FPS: 400 fps.
Trigger Pull: The trigger pull on the Umarex HK 416 A4 GBB Airsoft Rifle is typical of a single action only trigger found on the AR platform. It has a very slight take up with just a little bit of resistance part way, and then a predictable light break. The reset has a noticeable click to it and it is also very short allowing for very fast semi auto shooting. Of course you can always put it in full auto and let her rip, but you will have to restrain yourself since there are only 30 rounds in the magazine like you would find in a standard AR.
Accuracy: Like most of my Table Top Videos, they are made prior to shooting the gun I am reviewing, so we are all going to have to wait until I make my official Field Test Shooting Video for the Umarex HK 416 A4 GBB Airsoft Rifle. Where I will be testing out the velocity in fps using my Chronograph, and I will also shoot the Umarex HK 416 A4 in both semi auto and full auto to see how tight of groupings I can get at least at 30 feet away. I fully expect the Umarex HK 416 A4 GBB Airsoft Rifle to perform well as this is a very high quality product made by KWA.
Build Quality: The Build quality on the Umarex HK 416 A4 GBB Airsoft Rifle is outstanding with metal everywhere you would find it on a real steel AR. Of course the rear adjustable stock is plastic. Because of all the metal front to back, the Umarex HK 416 A4 is on the heavy side at 7.75 pounds, so packing it around all day may be a bit tiring but well worth the joy and pride when holding it. Fit and finish is also excellent, you will pay more for this GBB Airsoft Rifle but the material are nothing but quality.
Realism: The main thing you get from a GBB Airsoft Rifle over an AEG Airsoft Rifle, is not just quality components and build materials, but the user experience which is so much more realistic than shooting an AEG. The Umarex HK 416 A4 GBB Airsoft Rifle just feels so real in weight, how the controls all work, the full cycling of the bolt with a nice heavy and snappy blowback recoil on your shoulder. Even the way the buffer tube spring rings after each shot just makes this GBB Airsoft Rifle a joy to shot and experience. Sure it only holds 30 rounds per mag and shot consistency will vary depending on your shooting environment as all gas guns can be temperamental in colder weather. That said, a real AR does not hold 500 rounds in a mag and they can also be a bit finicky on the battle field.
Pros:
It’s GBB, love the realism of GBB Airsoft Rifles, it doesn’t get any more fun.
Tons of metal all over this rifle weighing in at almost 8 pounds.
Lots of accessory mounting options with the Precision CNC machined Quad Picatinny top side and bottom rails.
Full adjustable metal pop up sights.
H&K Lisence via Umarex.
6 position adjustable AR compatible rear stock.
Trigger feel is awesome, feels like a real steel AR trigger, you can’t even get close with an AEG.
Ambidextrous selector switches for left and right handers.
The threaded barrel can attach a silencer or other flash hidders.
All parts work just like the real steel version.
Can filed strip just like a real steel AR.
Cons:
Low magazine capacity as compared to an AEG.
Will be subject to cold weather conditions and cool down.
Very expensive to have and own such realism.
Comments:
The Umarex Umarex HK 416 A4 GBB Airsoft Rifle is for sure not going to be for everyone as it is with out a doubt a very expensive Gas Blowback Airsoft Rifle. It may not even be your best option out on the Airsoft Field, as more than likely you are going to get out gunned by everyone else using an AEG with their 500 round magazines and endless torrent of BB’s coming at you. If you just want the most realistic Airsoft Experience, than look no further than the Umarex HK 416 A4 GBB Airsoft Rifle, as it does not get more realistic than this and if you want to replicate your real steel AR perhaps for training and practice sessions, than there is no way you can beet the Umarex HK 416 A4. For those with deep wallets that want the ultimate and most realistic AR you can get, you can’t go wrong with the Umarex HK 416 A4 GBB Airsoft Rifle.
My Vimeo Table Top Review for the Umarex HK 416 A4 GBB Airsoft Rifle:
Trigger Pull: The trigger pull on the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle is light short and crips with just a little bit of take-up before it releases. You will have to first either work the lever action which also chambers a preloaded shell into the breach of the barrel, or you will have to pull the hammer back in order for the trigger to be active as a single action trigger.
Accuracy: At this time I have not made my Field Test Shooting Video or shot the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle. I am really looking forward to testing it out when I make my Filed Test Shooting Video Review for it hopefully soon! Barra claims is will shoot .22 caliber pellets up to 410 fps. I am not sure if this is for mid grain or light grain pellets but we will find out again when I make my shooting review video. The rear sight does have three positions of elevation so I should be able to find one that works here my Indoor Sea Can Airgun range where I setup paper targets at 30 feet away. I am hoping the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle shoots close to the bullseye out of the box as it does not have any windage adjustment to space of.
Build Quality: The Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle seems to very well built and has a lot theft to it weighing in at 6.5 pounds so it feel very solid to hold and shoulder. It is mostly all metal which from what I can see, only the stock is plastic rather than actual wood. The faux wood does look very real and unless you get in close to it and notice none of the real wood imperfection, then you can figure out it is emotion wood. The fit and finish is all quality and I expect the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle to perform reliably.
Realism: The Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle is based on the Winchester 1866 Lever Action Rifle and does look the part with all the expected working parts found on a lever action rifle. Barra has included a thumb safety behind the hammer along with a grip safety that requires the shooter to hold the lever tight to the stock or you will not be able to pull the trigger. Being a shell loading design that requires preloading pellets into the shells and then loading those shells into the rifle tub magazine also makes the experience feel very real. Barra has done a great job hiding the CO2 being the butt plate and the barrel open is about the diameter of a 45 caliber bullet.
Pros:
Not many rifles come in .22 Caliber. Should have a bit more down range power over .177 caliber.
Almost all metal construction with good weight and feel to it.
The Faux Wood stock looks very realistic, hard to tell it’s plastic!
Octagonal recessed barrel adds to realism.
White writing is mostly under the barrel so fairly discreet.
The gold receiver and but plate add to the look of quality.
Rear sight has three positions for different ranges and sighting types (standard low, peep mid, high distance).
Also have the option of mounting a red dot or magnified optical sight on the rear compact picatinny rail.
Dual 12 gram CO2 system is less expensive and reduces the cool down effect while allowing for lots of pellet reloads between heaving to change the CO2.
Has a secondary safety on the lever, it must be pressed into the stock to shoot, kind of like a grip safety.
Claimed 410 fps should be more than sufficient for mid range shooting.
Lever action rifles are just so much fun to shoot!
Cons:
Rear sight is not adjustable for windage.
More than likely going to lose some shells if you are shooting outside in the yard as they all eject into the grass or who knows where? Will probably need to buy some backup shells over time.
You will have to hold the lever snug to the stock or the trigger will not work.
Comments:
I was super excited this year at SHOT Show when I went to the Barra Booth and the Barra Team showed me their new Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle. We also spoke about how the .22 caliber version shoudl be Canada friendly as it was under 500 fps. Here we now and I finally got my hands on one and it is nice to have a .22 Caliber Replica CO2 Lever Action Rifle available to us Airgun Collectors. Sure Umarex has their Legends CO2 Shell Loading BB Rifle but I like The Barra 1866 shooting pellets over BB’s. Price point for the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle is very reasonable for what you get as it is a lot of gun for the money. I am really looking forward to seeing how well it shoots and if it can get close to the claimed 400 fps.
My Vimeo Table Top Review for the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle:
Since I use all kinds of cameras for the making of my Replica Airguns Videos including the HoverAir X1 Flying Camera Drone, I though it would be a good idea to share my thoughts on the new DJI NEO Mini Drone which Is replacing my HoverAir X1 at least for now. This is not an unboxing first impression video with basic out of the box test videos. This video is going to go over how the DJI NEO actually performs comparing to the HoverAir X1 and other DJI dedicated Drones and FPV Drones.
I have used different drones to do everything the DJI Neo claims to do, but can the DJI NEO really do it all and if so can it do it all as good or good enough?
The short answer is yes it can do it all but will it meet your specific expectations?
I don’t claim to be a pro at any of the things the DJI Neo can do, but I have at least some experience using the HoverAir X1 for the past year which is a similar experience as what you get with the base model DJI NEO out of the box.
I also have owned and flown standard DJI Drones with remote control setups for taking those cinematic flying around smooth shots. The DJI NEO out of the box can do limited distance and height using your DJI NEO with your phone in Manual Mode. You can also purchase the DJI NEO Fly More Kit that comes with the RC-N3 Controller and unlock almost limitless distance and even more features out of your DJI NEO.
I owned the first generation DJI Avata and flew it with the motion controller similar to what you can do with the DJI NEO when combined with the DJI Goggles 3 and RC Motion 3 Controller. That experience really got me more interested in experimenting with FPV drones.
I now own a bunch of FPV drones in various styles and sizes and use them with my DJI Goggles and Manual Controller to fly in full Manual Acro Mode for a true fps experience.
DJI NEO Compared to the HoverAir X1.
For the most part they both perform a lot of the same Selfie Camera shots like Follow, Droney, Circle, Rocket, Spotlight, Direction Track and some more specific to each unit.
You can fly them without a controller or even your phone by simply turning them on, selecting your flying mode and pressing a button.
They both can use your phone as a simple virtual controller to fly them around in manual mode and get some cool more cinematic shots.
They both can use your phones built in Microphone to record audio while taking out the drones propeller noise.
They are both well under 250 grams closer to 120 to 130 grams.
They both have a one axis gimbal setup.
The cameras in both are comparable. 2.7k 30fps for the HoverAir X1 and 4k 30fps for the DJI NEO.
Both have full prop guards and are very crash resistant.
Where does each one shin in my opinion?
HoverAir X1:
Starting with the HoverAir X1 it came out first and so more of the bugs and settings have been worked out, and you have to give them credit for being first here as DJI did a lot of copying if we are being honest.
The HoverAirX1 has more ability to change settings using the buttons on the drone without going into the phones software to do it.
The HoverAir X1 is better at staying in place when inside and in lower light situations.
The HoverAir X1 can record in portrait mode for social media content.
The HoverAir X1 can use just about any external USB or BT Microphone for recording to get better audio than just by using you phones internal Microphone. The DJI NEO only gives you the option to use their DJI 2 Microphone which starts at $300 Canadian.
The HoverAir X1 can be folded, making it much more portable.
The HoverAir X1 at this time can track a little bit faster than the DJI NEO, but that can change with a softer update in the future.
The HoverAir X1 does not restrict where you can fly as there is no Geo Fencing. The DJI NEO will not give you much of a problem here when in solo mode or when connected to the DJI Fly App without any controllers or Goggles, but when connected to addition DJI accessories, you will have to factor in Geo Fencing limitations and work arounds which can be really annoying.
DJI NEO:
Moving on to the DJI NEO, the NEO has voice command as long as the DJI Fly App is open and your phone screen is on, very useful when wanting to change the drones distance and height in modes like Follow and Direction Tracking.
The DJI software is a bit more intuitive and the Manual Mode allows for much smoother control of the DJI NEO and further distances and height. (60m)
The DJI NEO records in 4k which is a bit better than the HoverAir X1 2.7k, but not by much. There is room for improvement with the NEO in terms of software updates but we will see what DJI does in terms of improving video quality and hopefully the ability to tweak the video settings.
The DJI NEO has built in GPS which allows it to stay in position outside better and even go over water and steep drop-offs.
The DJI NEO has an 18 minute battery run time versus the HoverAir X1 10 minute battery run time. (In real life it is more like 15 versus 8 minutes), so almost double per battery.
The DJI NEO is much more than a one trick pony with its ability to be much more than a Flying Selfie Camera Drone. It can be a full fledged remote controlled drone or even a true FPV drone when adding the additional accessories to it.
And that brings us to the point in this video where I talk about if the DJI NEO can really perform good enough to possibly replace your stand alone drone or even your FPV Drone? And again it depends on what your expectations are and what your end use in these modes is.
In terms of a stand alone drone, when the DJI is connected to the RC-N3 Controller, it can do much of the same tasks you would expect and get many of the same shots. Because of its size it will not be as good in stronger winds and it also does not have the power or speed of a larger dedicated Drone. Most of the DJI Drones also have higher quality cameras with larger sensors and 2 or even 3 axis gimbals with better stabilization. They also have much longer battery run times so you can go farther and longer with them. That said the DJI NEO may be good enough for a non-pro user to get the shots they are looking for.
The DJI NEO has been compared to the DJI Avata series and it does look a lot like a smaller version for sure. In terms of flying ink a DJI Avata, again it is smaller and less powerful so it will be slower and more prone to weather conditions. The camera systems on even the DJI Avata 1 is much better than the DJI NEO with full 4k 60fps ability and the DJI Avata 2 camera is even better than the Avata 1 camera.
As an FPV Drone you can strap on a set of DJI Goggles 3 and and instead of using the Motion Controller 3, you can connect to the RC Motion 3 Controller and get full manual mode FPV flying and hit speeds as high as 60km/h. You do have to be careful as the DJI NEO is not really a freestyle drone, if you push it too hard it will washout and go out of control potentially crashing, especially if you are close to the ground and it does not have time to recover. That said it is a lot of fun to fly if you fly within its limitations.
Some tips when using the DJI NEO based on my experiences:
Record in 4k for best quality except when in FPV Manual mode as the faster motion of FPV flying requires more frame rate speed to capture all of the motion without getting video jitter. Your feed in the DJI Goggles will look a lot better in 1080p 60fps as 1080p is the native resolution and 60fps is much smoother and allows for easier viewing while flying.
Do not use the DJI NEO inside in low light, it simply does not work very well in low light inside and will most of the time just land.
When using a remote like the RC-N3 or the Goggles 3, lower your video sharpness to (-2) for better looking video.
To fly in restricted GEO Zones you will need to go online and make a license request on the DJI Fly-Safe website and then you will need to treansfer that request license to your drone using the DJI Fly App while connected to the DJI NEO with with an internet connect. A bit of a process but after a few times you get the hang of it. I was not able to unlock a Geo Zone on location while in the app even with an internet connection. Hopefully this gets fixed down the road.
Here we go with another unboxing video this month, and this is a big box, so no doubt the mystery items are going to be big too! As always with new products, I will be following up with dedicated Table Top and Field Test Videos for each of them so make sure to check down the road for those videos for a lot more information and actual performance results…
Don’t look below if you want to just watch the video and be surprises by what’s inside the mystery box but if you want a quick peak before hand then checkout the basic specs below for all three new items I will be reviewing soon.
Type: GBB Airsoft Pistol. Manufacturer: Distributed by EMG. Model:SAI 2011 DS 4.3. Materials: Mostly metal (Aluminum) and plastic. Weight: 1.94 pounds (878 grams). Total Length: 8.25 inches (210mm). Barrel: 4 inches (102mm) metal rifled. Propulsion: CO2 x1. Action: Semi auto Blowback, SAO trigger. Ammunition Type: 6mm Airsoft BB’s. Ammunition Capacity: 30+1. FPS: Claimed 380-430.
Trigger Pull: The trigger pull on the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol like what you would find on a traditional 1911 style pistol so it is Single Action Only and is nice and short and light in weight. Being a single action pistol for your first shot you will need to pull back the slide to chamber a round into the barrel which will also cock the hammer for you. the blowback action will cycle the slide for you from that point on automating the action.
Accuracy: I have not made my Field test Shooting Video or even tested out the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol yet or even shot it at all so I can not comment on the performance other than the claimed velocity of (380-430 fps) which does seem a bit high to me? My plan is to have this info available next week when I make my Field test Shooting Video so stay posted of that video coming out shortly…
Build Quality: The EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol is a well made Airsoft Pistol with quality materials throughout. You will find a machined aluminum slide an aluminum frame and a full metal drop out magazine. The barrel is Titanium Nitride Coated and the only real plastic parts I could find would be the grips, the gas tube and the hop-up wheel. The stainless coating on this Airsoft pistol looks fairly thick and so should stand up over time with less wear showing.
Realism: The EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol to me is not a true 2011 design as it does not have the once piece grip/trigger guard design found in 2011 pistols. It is double stack so that fits with the naming convention but I would say it is more like a combination of the Salient Arms SAI Red and SAI Red H. It does check all the boxes for realism in terms of function, looks and feel with all the working parts you expect on a Replica Airsoft Pistol including being able to fully field strip it.
Pros:
Superior Performance and 1:1 Scale Functionality.
Machined Aluminum Alloy Frame and Slide.
Rugged Reliability without sacrificing Weight.
Officially licensed by Salient Arms International.
Front and Rear Combat Style Sights with integrated Forward Fiber Optic.
Machined Anti-Glare Slide Top.
Ambidextrous Safety and Squared Trigger.
Titanium Nitride Style SAI Barrel for added durability.
On-Frame Integrated Accessory Rail.
Skeletonized trigger and hammer.
Options of both Green Gas and CO2 Magazines.
Deep Engraving with Real Steel Training Weapon Grade External Finish, Look, and Feel.
Cons:
Has orange barrel tip. But can be removed with some work.
No white dot or fiber optics on rear sight.
Not really a True 2011 in design as the name suggests.
Comments:
I am a huge 1911/2011 fan and so the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol really appeals to me. I like the compact design of the EMG SAI 2011 DS 4.3 yet it has a nice high capacity double stack magazine that gives this Airsoft Pistol a bit more girth in the hands which for me is OK as I have pretty large hands. I like that you have the option of shooting CO2 or Green Gas depending on what magazine you are using. This version comes with a CO2 Magazine, but you can purchase a green gas magazine if you prefer using gas over CO2. I like the modern look with the gold barrel and skeletonized trigger and hammer. The price is on the higher side but sometimes you have to pay a little bit more to get the additional quality and to have a gun that really stands out.
In this Mystery Boxing Video I get to take a look at 4 new Airgun Products and give you my first impressions along with a few specifications about each of them but not in a lot of details as I have not had an opportunity to research any of them as this my first time seeing them.
First out of the Mystery box is a new Umarex T4E .43 Caliber CO2 Blowback Paintball Pistol with Walther licensing called the Umarex T4E PDP. I have reviewed similar styled T4E .43 caliber CO2 Blowback Pistols in the past and this one should perform and function similarly.
The next Airgun I pulled out out of the box was the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol, a really nice 1911 styled Airsoft Pistol with a stainless finish and gold barrel with a CO2 Magazine. This one looks and feels really nice.
Staying with the pistols that came in this Mystery Box, I got my first look at the Umarex Markpoint .177 Caliber Break Barrel Pellet Pistol that has a bit of a utilitarian look and feel to it. This one is the longer barrel version and has a claimed fps of 395 using alloy pellets so we will see what it can get with more traditional lead pellets when I make my Field Test Video for it down the road a bit.
The last item out of the Mystery Box was another Umarex product, a fun CO2 BB Rifle with H&K licensing called the HK416. This semi auto and 6 round Burst internal Blowback CO2 BB Rifle is a lot like the Steel Storm and Steel Strike from Umarex but a little bit larger I would say and with H&K Licensing so more of a true Replica Airgun.
I will be making full Table Top and Field Test Videos for all of these items shortly so keep an eye out for those videos but for now you can at least get an idea what these Airgun Products will offer.
First off, Comica was kind enough to send the Comica BoomX-D PRO Wireless Microphone System for free to review. That said the opinions in this review are my own and I do a fairly thorough review testing out the audio of the Comica BoomX-D PRO’s to my Comica Vimo C similar Microphone system. I use a variety of setups including recording into my camera and smart phone via line in and USB in. I also test out the internal recording capability of the Comica BoomX-D PRO’s to see if three is any difference in sound and levels.
One of the main reasons why I was interested in tech Comica BoomX-D PRO Wireless Microphone System is its ability to record directly to internal memory so you do not necessarily need a receiver as you can record direct to internal memory to one or both of the transmitters Microphones and then transfer the audio to you computer or smart phone later to sync with any video you may have recorded to go along with it.
The Comica BoomX-D PRO Wireless Microphone System also comes with lapel Microphones that you can use instead of the built in Microphones on the actual transmitters which can make for a more discreet microphone setup and may improve audio just a little bit. The Comica Vimo C Wireless Microphone System I have been suing for the last two years and which has never let me down and fulfilled pretty much all my audio needs is a bit more compact setup than the Comica BoomX-D PRO Wireless Microphone System but Comica Vimo C’s do not have internal memory to record to our allow for using lapel microphones.
In terms of audio quality, both systems sounds fairly similar, the Comica Vimo C Wireless Microphone System to me sounds like it may be a bit fuller in the bottom end just a little bit but not by much. Both systems have a solid connection between the transmitters and the receiver giving good range with a reliable connection with no cutouts as long as you do not get really far away with objects in-between the transmitter and receiver. I suggest you watch my Full Review Video and decide for yourself how you feel about the audio quality of the Comica BoomX-D PRO Wireless Microphone System and if perhaps it may be the right setup for your audio recording needs. In my opinion they are a well priced system for what you get and are comparable to much higher pried units without compromising quality of build or sound.
Here are some of the key features of the Comica BoomX-D PRO Wireless Microphone System:
2.4G Digital Dual-channel Wireless microphone, Global Free Frequency.
