View fullsize

Today we’re checking out the G&G PCC45 Pro, an AEG M-LOK Airsoft SMG / PCC-style carbine that’s modeled after the modern pistol-caliber .45 format. It’s a compact little platform with a folding stock, a clean modern look, and a setup that should be a lot of fun for tighter indoor/outdoor spaces where you want something quick-handling without going full-length rifle.

As always, this is a Table Top Review, so we’re not going to be doing any shooting or chrono work in this video. The goal here is to go over the specs, the overall build quality, materials, controls, and features, then finish off with the pros and cons so you know what you’re getting before the field test. We do carry this one in our Canada store and I’ll put a link in the description. At the time of recording we don’t currently have it in the US store, but I’ll include a link to something comparable in the US store so you can at least browse similar AEG options.

View fullsize

Specifications:

• Manufactured / Distributed By: G&G (Made in Taiwan)

• Platform: Airsoft AEG (Electric)

• Ammunition: 6mm plastic airsoft BBs

• Style: PCC .45-inspired carbine / SMG format

• Fire Modes: Semi / Full Auto (and programmable 3-round burst)

• Trigger System: G&G ETU + Gen4 MOSFET

• Gearbox: Version 2 style gearbox

• Bearings: 8mm bearings

• Hop-Up: Adjustable

• Construction: Reinforced polymer receiver + CNC aluminum M-LOK handguard

• Stock: Folding polymer stock with rubber butt pad

• Controls: Fully ambidextrous controls

• Trigger: Flat-faced “competition style” trigger

• Magazine: 110-round mid-cap (no winding required)

• Velocity: Listed around 360 FPS (other claims ~330–350 FPS depending on BB weight/setup)

• Weight: 4.44 lbs (2.0 kg)

• Length: 29.1 in (74 cm)

• Inner Barrel: 10 in (25.5 cm)

• Threading: 14mm CCW

• Battery (recommended): Commonly suggested 7.4V small stick LiPo (battery space is limited in the handguard)

View fullsize

In the Box:

• G&G PCC45 Pro AEG

• 110-round mid-cap magazine

• Instruction manual

• Cleaning rod

The manual is fairly large and covers operation and features well, but battery specs are oddly hard to find in it.

View fullsize

Walk Around:

The PCC45 Pro is a great-looking compact PCC setup. It’s not overly heavy, but it also doesn’t feel like a lightweight “toy”, there’s a nice balance of polymer and metal.

Up front you’ve got the CNC aluminum M-LOK handguard, and it gives you a lot of flexibility for mounting accessories. The front sight is a flip-up style (part metal / part polymer), and the rear sight is a metal flip-up peep sight.

Sighting adjustments follow the common setup:

• Front: elevation

• Rear: windage

The muzzle comes with a black tip (not a red/orange one), and you also get 14mm CCW threads for add-ons like a tracer unit, mock suppressor, or alternate flash hider.

Controls are a strong point on this platform:

• Ambidextrous selector (safe / semi / full-auto, and programmable for 3-round burst)

• Ambidextrous charging handle that makes it easy to access the hop-up

• Ambidextrous mag release

The magazine has a realistic “.45-style” look. One handling note: if that front insert/follower isn’t seated correctly, you’ll want to be careful inserting the mag so you don’t snag or damage it.

The folding stock is simple and quick to use, with a rubber butt pad that helps it shoulder nicely.

View fullsize

Pros:

• Compact PCC format with a folding stock (easy to maneuver, store, and transport)

• M-LOK handguard gives lots of mounting options (light, grip, etc.)

• Metal where it matters (handguard, barrel, sights, controls/pins/latches)

• Fully ambidextrous controls, great for lefties and righties

• ETU + Gen4 MOSFET = solid trigger response and efficiency

• Semi / Full Auto + programmable 3-round burst

• 14mm CCW threading for common muzzle devices

• Fully adjustable sights (front elevation / rear windage)

• No orange tip (ships with a black tip)

Cons:

• Uses a proprietary PCC45 magazine, which can be pricier/chunkier than common M4 mags

• Battery space is tight inside the handguard, so battery choices are limited in size

• Handguard access for the battery isn’t hard, but it can take a bit of fiddling to fit everything cleanly

View fullsize

Final Thoughts:

Overall, the G&G PCC45 Pro feels like a well thought-out PCC-style AEG that checks a lot of boxes: it’s compact, it’s easy to maneuver, the folding stock makes it convenient for transport and storage, and you get the benefit of the M-LOK handguard for mounting a light, grip, or other accessories without needing a bunch of adapters. The ambidextrous controls are a big plus, and the ETU + Gen4 MOSFET setup is exactly what you want on an AEG like this for consistent trigger response, efficiency, and the ability to run semi, full auto, or 3-round burst depending on how you program it.

That said, there are a couple practical trade-offs to keep in mind: the battery space is tight in the handguard so you’re going to be limited on what fits (and it’s worth planning that out before you buy), and the PCC45 magazines are more proprietary than standard M4 mags which can affect cost and availability if you want to stock up. The field test will tell the real story, we’ll see where it chronos in the real world, how consistent it is, and how it feels to run in full auto. But based on the tabletop handling and feature set, this looks like a solid option for anyone wanting a modern PCC-style AEG that’s different from the usual M4 layout.

• Buy the G&G PCC45 Pro M-Lock Airsoft AEG SMG in Canada

• Buy similar AEG Airsoft rifle in the US

This one’s really growing on me because it’s not your standard AR platform. We review a lot of AR-style rifles (and there’s nothing wrong with ARs, they’re popular for a reason), but this one has a very different vibe. It’s based on the SA80 British service rifle design and comes in a compact bullpup layout that gives you a long inner barrel without needing a long overall rifle.

Today’s Table Top Review is the G&G L85A2 (A2 version) ETU Airsoft AEG Rifle — and yes, a full Shooting / Field Test Video will be coming shortly. I definitely want to get this one out and properly test it.

This model is available in our Canada store. At the time of recording this review, it wasn’t available in the US store, but I’ll add an equivalent/similar US option (or a list of comparable AEG rifles) in the post links.

View fullsize

Specifications:

• Manufacturer / Distributor: G&G (Made in Taiwan)

• Replica Of: SA80 / L85A2 (British 5.56×45 NATO service rifle family)

• Platform: Airsoft AEG (Electric)

• Ammunition: 6mm plastic airsoft BBs

• Operation: AEG with simulated blowback (reciprocating bolt for a slight “tap” feel)

• Fire Modes: Semi / Full Auto (and programmable for 3-round burst via MOSFET programming)

• ETU System: Programmable MOSFET + Electronic Trigger Unit (ETU)

• Motor: High-torque motor (rated around 25,000 RPM)

• Gearbox / Internals: Full metal gearbox, heat-treated metal gear set

• Bushings: 8mm oilless bushings for smoother gear rotation

• Hop-Up: Adjustable hop-up (access via dust cover)

• Trigger: AEG electric trigger (single-action-only style in practical terms)

• Safety: Cross-bolt safety

• Sights: Metal, fully adjustable front & rear

  • Front: elevation

  • Rear: windage

  • Rear peep sight includes two aperture sizes

• Weight: 6.0 lbs (2.7 kg)

• Overall Length: 27.5 in (70 cm)

• Inner Barrel Length: 16 in (40.6 cm)

• Magazine: 450-round high-cap AR-style AEG magazine (AR/M4-style AEG mags should fit)

• Velocity: Approx. 370–400 FPS with 0.20g BBs (varies by setup/conditions)

• Top Rail: Yes (carry handle/rear sight assembly sits here; optics possible with a riser)

• Flash Hider: Metal AR-style, black (no orange tip on this one)

• Sling Mounts: Multiple mounting points; front appears reversible L/R, rear has mounts on both sides

View fullsize

Build Quality & Materials:

This rifle has a really solid, substantial feel and is nicely balanced. There’s a lot of metal here.

Notable metal parts include (from what you can see and feel):

• Upper & lower receiver areas

• Carry handle / rear sight assembly

• Front & rear sights

• Magazine (metal high-cap)

• Trigger guard (metal for sure)

• Barrel, flash hider

• Sling mounts, pins/screws, switches and assorted hardware

View fullsize

Polymer / rubber components include:

• Handguards

• Pistol grip

• Cheek rest area (polymer)

• Butt plate (rubber)

Overall: it looks great, feels great, and doesn’t feel “toy-ish” at all.

In the Box:

• G&G L85A2 ETU AEG rifle

• 1× metal high-cap magazine

• Cleaning rod

• Product brochure / extra paperwork

• Transport muzzle cover / cap

• Manual access via QR scan (links to G&G’s online manual)

View fullsize

Walk Around Notes:

A few highlights from handling it up close:

• Bullpup layout: compact overall, but the barrel/inner barrel length is still substantial.

• Sighting system: the carry handle doubles as the rear sight platform with flip apertures.

• Optics compatibility: you can mount an optic on the top rail, but you’ll likely want a riser so your eye line sits naturally.

• Dust cover + hop-up access: you can open the cover and access hop-up adjustments the normal AEG way.

• Charging handle note: my rifle did not come with the charging handle piece. I checked my unboxing footage and it wasn’t on there and it wasn’t in the box. It’s not essential for function, but at this price point it’s something you’ll want to confirm is included on yours.

View fullsize

Battery Compartment:

The battery area is under the handguard, and here’s the main downside:

• If you’re running a larger battery, you’ll likely need to remove hardware (including the sling mount and a bolt) to open the lower handguard section.

• With smaller nunchuck-style batteries, you may be able to fit them in with less disassembly, but bigger packs will probably require tools.

So yes: it works, but it’s not a quick tool-free battery swap design.

Quick Function Check:

I did a quick dry-fire demo using a 9.6V battery, and honestly it felt a bit underpowered/odd (some partial taps and inconsistent behavior). That could be the battery itself (mine was not great), but I would suggest this rifle will really come alive with a proper 11.1V LiPo and hope to use this setup in the field test video.

I’ve seen demos where the rate of fire is very high using an 11.1V setup, so that’s what I’ll be testing with for the shooting video.

View fullsize

Pros:

• Lots of metal in the construction with a super solid weight, feel, and balance

• Unique bullpup British-style rifle (not just another AR build)

• Simulated blowback adds a bit of feedback vs. standard AEGs

• Works with AR/M4-style AEG magazines (easy to find replacements/midcaps/highcaps)

• Good optics flexibility on the top rail (carry handle sight system included, or add your own)

• Programmable fire mode: Full Auto or 3-round burst

• No orange tip (and if you prefer one for visibility, you can always add your own)

Cons:

• Limited accessory mounting options (mostly just the top rail; not a modern “add rails everywhere” setup)

• Battery access can require tools and disassembly, especially for larger batteries

• Priced on the higher side (around $600+ CAD)

• My sample was missing the charging handle part, check yours when it arrives

View fullsize

Final Thoughts:

This is a really nice AEG. It feels premium in the hands, the two-tone green looks great, and it’s a cool change from the sea of AR platforms, while still keeping things practical with AR-style AEG mag compatibility.

The simulated blowback isn’t going to replace the feel of a true gas blowback rifle, but it’s a nice touch, and paired with the ETU/MOSFET system and upgraded internals, it helps justify why this model sits in a higher price bracket.

Next up: the field test / shooting video, ideally with a proper 11.1V battery so we can see what this rifle really does when it’s running at its best.

Availability:

• Canada Store

• United States Store

And remember we carry air guns, BB guns, airsoft guns, pellet guns, blank guns, and accessories in both our Canada and US stores.

Thanks for watching and reading! Don’t forget to subscribe, and follow us on Facebook, Twitter, and Instagram. More videos coming soon…

In this Table Top Review, we’re taking a detailed look at the G&G ESG B-10 2.0 Gas Airsoft Shotgun. This is a very unique Airsoft platform, as it’s fully gas powered—no spring, no AEG system, and no blowback. Just straight gas operation.

Gas-powered Airsoft shotguns are fairly rare, and this one stands out even more because it’s essentially a semi-automatic gas shotgun capable of firing five or ten BBs per trigger pull. That makes it a serious close-quarters option and something I’m genuinely excited to field test.

As always, this is a Table Top Review only. A full Shooting / Field Test Video will be coming later, where we’ll see how it performs in real-world use.

Links to purchase this product in Canada and the US will be included in the video description.

View fullsize

Specifications:

• Manufacturer / Distributor: G&G

• Made In: Taiwan

• Power Source: Green Gas

• Ammunition: 6mm Airsoft BBs

• Action: Gas powered, semi-auto

• Burst Modes: 5-shot or 10-shot (selectable)

• Trigger: Double-action only

• Construction: Metal & polymer

• Weight: 5.6 lbs (2.52 kg)

• Overall Length: 18.39 inches (46.7 cm)

• Inner Barrel Length: 12 inches (30.5 cm)

• Magazine: 105-round AR-style mid-cap

• Claimed Velocity:

  • ~235 FPS in 5-shot mode

  • Lower in 10-shot mode

• Rails: Picatinny rails on top and sides

• Selector: Ambidextrous

• Sling Mounts: Front and rear QD points

While the FPS may seem low, it’s important to remember that five or ten BBs are being fired simultaneously, which requires significantly more gas per shot.

In the Box:

• G&G ESG B-10 2.0 Gas Airsoft Shotgun

• 105-round AR-style mid-cap magazine

• Product brochure

• (Manual not present in this package, but typically included or available online)

The shotgun comes packaged in a large box with a sleeve that differentiates the 2.0 version from the original B-10.

Design & Layout:

The ESG B-10 2.0 uses a bullpup layout, which keeps the overall length short while still allowing for a reasonably long inner barrel. Despite its compact size, the gun feels very solid and heavy, likely due to its internal gas system and metal components.

Notable design features include:

• Picatinny rails on the top and both sides

• Ambidextrous selector switch for 5- or 10-shot bursts

• Ambidextrous magazine release

• QD sling mounts front and rear

• Non-orange flash hider

• Polymer butt plate with internal gas reservoir

Because of the low rail height relative to the grip, you’ll almost certainly want to install some form of optic or sight to get a usable sight picture.

View fullsize

Controls & Operation:

The selector switch serves as both the safety and burst selector, allowing you to choose between five or ten BBs per trigger pull. It’s ambidextrous and easy to reach from either side.

One thing worth noting is how the selector cycles internally. There can be a one-shot delay when switching between modes, meaning the first pull after switching may still fire the previous burst count before changing over.

The trigger is double-action only, as there’s no blowback system. While heavier than a single-action trigger, it’s not excessive—especially considering the amount of ammunition being fired with each pull.

View fullsize

Magazine Compatibility:

The ESG B-10 2.0 uses standard AR/M4-style Airsoft magazines, including mid-caps and high-caps. It ships with a 105-round mid-cap, but you can easily use other compatible magazines from your collection.

The magazine locks in securely but does require a firm push to seat properly.

Gas System:

The gas reservoir is housed in the stock and holds a substantial amount of gas. Based on initial handling and other reviewers feedback, you should be able to fire multiple magazines before needing to refill, despite the high BB output per shot.

This is something we’ll fully confirm in the upcoming field test.

View fullsize

Pros:

• Unique gas-powered semi-auto shotgun design

• Fires 5 or 10 BBs per trigger pull

• Strong metal construction with excellent weight and balance

• Compact bullpup layout for close-quarters use

• Compatible with standard AR/M4 Airsoft magazines

• Efficient gas system despite high BB output

• Multiple rail options for optics, lasers, and accessories

• Sling-ready with front and rear QD mounts

• No orange tip, preserving realistic appearance

• High-quality G&G build at a reasonable price point

Cons:

• A sight or optic is essentially mandatory for proper aiming

• Double-action trigger is heavier than single-action designs

• Higher price compared to common AR-style AEGs

• No hop-up adjustment (typical for Airsoft shotguns)

View fullsize

Final Thoughts:

The G&G ESG B-10 2.0 Gas Airsoft Shotgun is a standout platform in the Airsoft world. Its ability to fire massive bursts of BBs with each trigger pull makes it an ideal close-quarters and room-clearing tool, while the bullpup design keeps it compact and maneuverable.

If you’re looking for something different from the usual AEG rifles, this gas shotgun offers a lot of fun, solid performance potential, and serious intimidation factor.

A full shooting and field test video is coming soon.

Where to Buy:

🇨🇦 Canada:
https://www.replicaairguns.ca/compact-bullpup-esg-b-10-20-airsoft-rifle

🇺🇸 United States:
https://www.replicaairguns.us

View fullsize

More Reviews & Articles:

Visit our blog for written reviews, photos, and additional information:
https://www.replicaairguns.com

Thanks for watching and reading.
Don’t forget to subscribe, and follow us on Facebook, Twitter, and Instagram.

View fullsize

In this Table Top Review, we’re taking a detailed look at the KJ Works KP-19S CO2 Blowback Airsoft Pistol. I’ve already reviewed the standard KP-19 in the past, and while the two pistols share a lot in common, there are some important differences between the KP-19 and the KP-19S that are worth covering.

I’m not entirely sure what the “S” officially stands for, possibly Sport—but interestingly, I’d actually argue that the non-S KP-19 is the more competition-oriented version, especially for IPSC-style Airsoft shooting. That said, the KP-19S still offers excellent performance, strong build quality, and a feature-rich design.

As always, this is a Table Top Review only. A full Shooting / Field Test Video will follow later.

This pistol is currently available in our Canada Replica Airguns store, and if a similar model is available in the US store, links will be provided in the video description.

View fullsize

Specifications:

• Manufacturer: KJ Works

• Made In: Taiwan

• Power Source: 12g CO2

• Ammunition: 6mm Airsoft BBs

• Action: Semi-auto, full blowback

• Trigger: Single-action, skeletonized, adjustable (1911-style)

• Magazine: Full-size dropout metal magazine, 25-round capacity

• Weight: 1.96 lbs (890 g)

• Overall Length: 9.84 inches (250 mm)

• Inner Barrel Length: 4.25 inches (108 mm)

• Claimed Velocity: 366+ FPS

• Hop-Up: Adjustable

• Rail: Under-barrel Picatinny rail

• Sights: Fiber-optic front and rear

• Safety: Ambidextrous

• Magazine Release: Reversible

• Threaded Barrel: Inner and outer threading

• Field Strippable: Yes (1911-style takedown)

The pistol includes a removable inner barrel extension, which may be required to reach the higher advertised FPS—something we’ll confirm in the upcoming field test.

View fullsize

In the Box:

• KP-19S CO2 Blowback Airsoft Pistol

• Full-size metal CO2 magazine

• Inner barrel extension

• Allen keys

• Small bag of Airsoft BBs

• Instruction manual (Usually!)

The pistol comes packaged in a basic cardboard box, but all essential accessories are included.

KP-19 vs KP-19S – What’s Different?

The KP-19S shares most of its core design with the standard KP-19:

• Same frame, grip, slide profile, trigger guard

• Same skeletonized trigger and hammer

• Same magazine compatibility

View fullsize

Key Differences

• KP-19 (Non-S):

  • Flared magwell

  • Compensator

  • Removable rear plate for mounting a red dot

  • More competition-oriented configuration

• KP-19S:

  • No flared magwell (cleaner, more streamlined look)

  • Fixed rear sight

  • Two-tone appearance

Performance between the two should be nearly identical, and if you’ve already watched the field test for the standard KP-19, expect similar results from the S version.

Walk-Around & Handling:

The KP-19S is a large pistol with a fairly wide grip. Shooters with smaller hands may find it bulky, but balance and weight distribution are excellent. At just under two pounds, it feels solid without being overly heavy.

Notable features include:

• Slide cutouts on the top and sides

• CNC-style gold/brass-colored fluted barrel visible through the slide

• Fiber-optic sights that are extremely easy to pick up

• Ambidextrous safety

• Reversible magazine release

• Dual threaded barrel system (inner and outer threads)

The full blowback action is strong, crisp, and satisfying, with excellent slide movement and reset.

View fullsize

Field Strip:

Field stripping follows a classic 1911 takedown:

1. Align the slide notch

2. Push out the takedown pin

3. Remove the slide assembly

Once opened, you gain easy access to:

• Inner barrel

• Recoil spring

• Hop-up adjustment wheel

Reassembly is quick and straightforward, making cleaning and maintenance easy.

View fullsize

Pros:

• High metal content with excellent weight and balance

• Strong, realistic full blowback action

• Excellent fit and finish typical of KJ Works pistols

• High-capacity 25-round metal magazine

• CO2 or gas compatibility (with appropriate magazines)

• Dual threaded barrel for accessories and extensions

• Bright fiber-optic sights (easy to acquire on any background)

• Short, light, adjustable 1911-style trigger

• Ambidextrous safety and reversible mag release

• Easy field stripping and hop-up access

Cons:

• Grip is wide and may not suit shooters with smaller hands

• Higher price point compared to similar KWC 1911 models

• Rear sight is not adjustable and does not accept a red-dot plate

  • Optics would need to be rail-mounted from underneath

View fullsize

Final Thoughts:

The KJ Works KP-19S is a high-quality, full-featured CO2 blowback Airsoft pistol with excellent build quality, strong recoil, and competition-inspired styling. While it lacks some of the modular competition features of the KP-19 non-s version, it offers a cleaner, streamlined look and the same reliable performance.

If you’re looking for a quality CO2 Airsoft pistol with a fantastic trigger, solid blowback, and premium construction, the KP-19S is a strong contender.

A full shooting and field test video will be coming soon.

Where to Buy:

🇨🇦 Canada:
https://www.replicaairguns.ca/kp-19s-hi-capa-gbb-airsoft-pistol

🇺🇸 United States:
https://www.replicaairguns.us
(A similar model may be linked if the KP-19S is not currently available)

View fullsize

More Reviews & Articles

Visit our blog for written reviews, photos, and additional info:
https://www.replicaairguns.com

Thanks for watching and reading.
Don’t forget to subscribe, and follow us on Facebook, Twitter, and Instagram.

View fullsize

In this Table Top Review, we’re taking a detailed look at the KWC 18 CO2 Blowback Steel BB Pistol. This model is part of KWC’s long-running lineup of Glock-style pistols—some licensed through Umarex and others, like this one, produced without official Glock markings but clearly inspired by the platform.

As always, this is a Table Top Review only. A full Shooting / Field Test Video will follow shortly.

I've reviewed many Glock-style CO2 blowback pistols over the years—Gen 3, Gen 4, Gen 5, Airsoft, Steel BB, full blowback, semi-blowback—you name it. KWC manufactures a large percentage of these frames and blowback systems, often for Umarex’s officially licensed Glock models. So while this KWC 18 isn’t a licensed Glock, it’s built by the same people behind many of the Umarex-branded models.

Let’s get into the details, compare it briefly to a couple of Umarex Glock versions, and then talk pros and cons.

View fullsize

Specifications

• Manufactured By: KWC – Made in Taiwan

• Power Source: 12g CO2

• Ammunition: 4.5mm Steel BBs

• Action: Full Blowback (Semi & Full Auto Selectable)

• Magazine: Full-size dropout metal magazine, 18 rounds (Model AAKC MM19)

• Trigger: Single-action-only style, short and light (Glock-like)

• Length: 203mm (8 inches)

• Barrel: 102mm (4 inches), smoothbore

• Weight: 1.7 lbs (771 g)

• Velocity: Up to 314 FPS under optimal conditions

• Sights: Front white dot; rear white half-rectangle

• Safety Systems:

  • Trigger safety (Glock-style)

  • Secondary safety located in the “serial number” plate under the barrel

• Hop-Up: Adjustable hop-up (rare for steel BB pistols)

• Rail: Under-barrel Picatinny rail for lights/lasers

• Field Strippable: Yes – Glock-style takedown system

View fullsize

In the Box

• KWC 18 CO2 Blowback Pistol

• 18-round full-size dropout metal magazine

• Allen key for CO2 tightening

• Small sample pack of steel BBs

• Instruction manual (loading, CO2 installation, hop-up access, takedown, jam clearing)

• Product guide / brochure

The packaging is similar to many Umarex Glock boxes—clean printed box with an internal molded insert.

View fullsize

Comparison to Umarex Glock Models

To give this pistol some context, here’s how it stacks up against a couple of current Umarex licensed Glock variants:

Umarex Glock 17 Gen 5 (Semi-Blowback)

• Has the MOS-style removable optic plate

• Features a semi-blowback system with shorter slide travel

• More efficient gas usage, higher FPS

• Double-action-style trigger (not Glock-accurate)

Umarex Glock 17 Gen 4 (Full Blowback)

• Full blowback with full travel slide

• Uses the same style of full-size dropout metal magazine

• Much closer in function to the KWC 18

• Fully licensed Glock markings

KWC 18

• Same full-blowback feel as the Gen 4

• No Glock markings (unlicensed)

• Adds full auto mode, which the Glock 17 models do not have

• Very similar weight, ergonomics, and trigger feel

• Slightly different slide shape, trigger guard, and frame cuts to avoid trademark conflict

If you’ve handled Umarex Glock models, this KWC 18 will feel instantly familiar.

View fullsize

Walk Around

The KWC 18 is extremely Glock-like in shape and ergonomics, with only small cosmetic changes:

• Slightly longer and differently shaped slide cuts

• Altered trigger guard shape

• Modified rail and frame geometry

• No Glock-branded markings anywhere

Controls are where you expect them to be:

• Slide catch/release on the left

• Trigger safety

• Takedown levers in the Glock position

• Selector switch for Semi / Full Auto just above the trigger area on the left side

• Under-barrel safety disguised as a serial number plate

Sights are classic Glock style:

• White dot front

• White “goalpost” style rear

The full-size dropout metal magazine fits tightly and locks back after the last shot. The slide feel is excellent—strong spring tension, clean metal-on-metal sound, no cheap clanking.

Field Strip

Field stripping is Glock-simple:

1. Lock slide slightly back

2. Pull both takedown tabs down

3. Slide comes forward and off

(Note: KWC pistols are often tight from factory, so the first removal may require a solid tap.)

Inside you’ll find:

• Full metal slide

• Return spring/guide

• Removable inner barrel

• Accessible hop-up wheel

• Fire control components including the semi/full auto mechanism

Reassembly is straightforward once parts are aligned correctly.

View fullsize

Pros

• Excellent weight and feel – solid, realistic, and well-balanced

• Full blowback provides snappy recoil and realistic slide movement

• Single-action Glock-like trigger is short, light, and crisp

• Full-size metal magazine for realistic reloads

• Semi & Full Auto modes (rare for BB pistols)

• Adjustable hop-up — unusual but useful for slight elevation tuning

• Field strippable, great for maintenance and realism

• Picatinny rail for lights/lasers

• Good trainer option for Glock owners thanks to similar ergonomics

• Minimal branding gives it a clean tactical look

Cons

• Full blowback reduces FPS and CO2 efficiency

• Full auto burns CO2 extremely fast

  • Expect maybe one strong magazine and a partial second depending on temperature

• CO2 cooling effects occur quickly during rapid fire

• Tight factory tolerances make the first field strip a bit stiff

• No official Glock markings (a con only if you want licensed branding)

View fullsize

Final Thoughts

The KWC 18 CO2 Blowback Steel BB Pistol is a very solid performer for anyone who wants a Glock-style CO2 pistol with full blowback realism—and especially for those who want the fun of full auto.

The build quality is strong, trigger feel is excellent, the slide operation is smooth, and the ergonomics match real Glock pistols closely enough to make this a legitimate training or plinking option.

If you already own Umarex Glocks, this model will fit naturally into your collection and may even share some compatible magazines (listed as AAKC MM19).

A full Shooting / Field Test Review is coming soon—these KWC/Umarex Glock-pattern pistols are always a blast to shoot.

Buy the KWC 18 BB Pistol

You can purchase this item from our Replica Airguns online stores:

• Canada

• United States

We carry a large selection of Umarex Glocks, KWC Glock-style pistols, airguns, BB guns, airsoft guns, pellet guns, blank guns, and accessories.

Thanks for watching and reading!
Don’t forget to subscribe, and follow us on Facebook, Twitter, and Instagram.
More videos coming soon!

I was away for a bit on a well needed vacation in Kona Hawaii but I’m back now and ready to dive back into things so get ready for more reviews! In this December Massive Mystery Unboxing, I crack open a stack of newer Airsoft and BB guns that landed in the Replica Airguns inventory. Full shooting reviews are coming later – this is your quick spec rundown so you can see what’s what at a glance.

View fullsize

A&K M1873R M-LOK Lever Action Airsoft Gas Rifle

Modern M-LOK handguard wrapped around a classic 1873 lever-action with real wood furniture. Western vibes with tactical mounting options.

• Type: Lever-action airsoft rifle (gas, non-blowback)

• Ammo: 6mm plastic airsoft BBs

• Power: Green gas (internal reservoir)

• Weight: ~2180 g / 4.8 lb

• Velocity: ~350–400 fps with 0.20 g BBs

• Magazine Capacity: 25-round internal magazine

View fullsize

ESG B-10 Gas Airsoft Shotgun

Bullpup “evolutionary shotgun” with a single barrel, selectable 5 or 10-round burst, and an internal gas reservoir in the stock. Uses standard M4-style AEG mags for capacity.

• Type: Gas-powered bullpup airsoft shotgun (single-barrel, burst)

• Ammo: 6mm airsoft BBs

• Power: Green gas (internal reservoir in stock, HPA-convertible)

• Weight: ~3140 g / 6.9 lb

• Velocity: Roughly mid-300s fps, often listed around 370–400 fps with 0.20 g BBs

• Magazine Capacity: 105-round mid-cap G&G GOM V2 magazine

View fullsize

G&G L85 Carbine ETU Airsoft AEG Rifle

British bullpup classic with modern electronics – ETU, MOSFET, and selectable semi / full-auto or semi / 3-round burst, plus blowback for added realism.

• Type: Airsoft AEG rifle (with ETU and blowback)

• Ammo: 6mm airsoft BBs

• Power: Electric (LiPo-ready AEG)

• Weight: ~6 lb / 2.7 kg

• Velocity: ~370–400 fps with 0.20 g BBs (store range 350–400 fps)

• Magazine Capacity: 450-round hi-cap magazine

View fullsize

G&G PCC45 Pro M-LOK Airsoft AEG SMG

Compact .45-style SMG with a lightweight polymer receiver, slim M-LOK front end, and G&G’s Gen.4 MOSFET & ETU. Great choice for a fast, modern CQB/field hybrid build.

• Type: Airsoft AEG SMG

• Ammo: 6mm airsoft BBs

• Power: Electric

• Weight: ~4.44 lb / 2.0 kg

• Velocity: ~360 fps (overall range 350–400 fps with 0.20 g BBs)

• Magazine Capacity: ~105-round mid-cap PCC45 mag

View fullsize

KJWorks KP-19S Hi-Capa GBB Airsoft Pistol

A race-style Hi-Capa with ported slide, fiber-optic sights, threaded barrel and an adjustable “speed” trigger. Runs on both green gas and CO2, with a non-blowback system for efficiency and consistency.

• Type: Hi-Capa style gas airsoft pistol (non-blowback)

• Ammo: 6mm airsoft BBs

• Power: Green gas or CO2 (compatible mags)

• Weight: ~0.9 kg / ~2.0 lb (listed as 0.89 kg)

• Velocity: ~366 fps (FPS range 350–400 fps)

• Magazine Capacity: 25-round magazine

View fullsize

KWC K18 CO2 Blowback Steel BB Pistol

Glock-18 style CO2 BB pistol with select-fire (semi and full-auto), metal slide, polymer frame, and full blowback. Great fun-factor steel BB blaster with 4.5mm ammo.

• Type: CO2 blowback BB pistol (select-fire, semi / full-auto)

• Ammo: 4.5mm (.177) steel BBs

• Power: 12 g CO2

• Weight: ~0.8–0.9 kg / ~1.7–2.0 lb

• Velocity: ~314 fps with steel BBs

• Magazine Capacity: 18-round drop-out magazine

View fullsize

A quick public service announcement: we’ve added a newer accessories line to the store from Gear Stock, and it’s definitely worth a look if you’re into airguns, airsoft, or paintball.

Under Brands → Gear Stock on the website, you’ll find a variety of products including ammo, CO2, BBs, Airsoft BBs, .43 cal paintball, LiPo batteries, chargers, connectors, helmets, masks, and even butterfly-style trainer “knives” (combs and bottle openers).

View fullsize

Today I just want to highlight a few of the items:

• 6mm Steel Airsoft BBs – Heavy steel BBs for when you want more weight than standard aluminum 6mm BBs. A bottle of 500 is around $9.99, making them a solid option for tougher targets or stronger airsoft platforms.

• 4.5mm Copper-Plated Steel BBs – Available in 1,500 and 2,500 count bottles (around $6.99 and $9.99). Pricing is generally cheaper than many big brands like Umarex and Crosman, while still giving you a branded product.

• Gear Stock CO2 – Their 12g CO2 is priced very competitively, basically on par with our no-name CO2. A 25-pack is about $26.99 versus $24.99 for no-name, so for a couple of dollars more you get a name brand cartridge.

• 88g CO2 – Gear Stock is also supplying 88 gram CO2 cylinders. These are ideal for rifles or platforms where you want long runtime and more consistent velocity without constantly swapping 12g cartridges. Check under CO2 & accessories or the Gear Stock brand section for availability and pricing.

View fullsize

If you’re looking to stock up on ammo, CO2, and useful accessories at good prices, head over to replicaairguns.ca, go to Brands → Gear Stock, and see what’s in the lineup.

View fullsize

This isn’t an airgun, but it will show up in a least some of my airgun videos, you just won’t usually see it. The DJI Neo 2 is my new AI camera drone that I’ll be using for outdoor shooting segments, walk-around tests, and any time I need moving shots without a camera operator.

Up until now I’ve been using the original DJI Neo and the HoverAir X1 Pro Max. The HoverAir still has slightly better pure video quality, and the original Neo had decent AI features, but together they meant more gear to carry and more batteries to manage. The Neo 2 is the first drone that can realistically replace both for what I do on this channel.

I picked up the Fly More Combo, which includes the Neo 2, the RC-N3 controller, three batteries, a charging hub, and the antenna/transmitter module pre-installed. With three packs I can get roughly 35–40 minutes of real-world flying, which is more than enough to cover a shooting session.

View fullsize

The biggest upgrade over the original Neo is the two-axis gimbal. Instead of cropping the image to keep the horizon level when the drone tilts in the wind, the camera physically moves side-to-side and up/down. Combine that with updated processing and you get up to 4K 60 fps (and even 100 fps in 4K), which is perfect for smoother tracking shots when I’m walking, moving between targets, or doing action-style footage.

The Neo 2 is also loaded with sensors and obstacle avoidance: fisheye cameras on multiple sides plus a front LiDARunit. It does a great job of seeing trees, branches and other obstacles and routing around them, which is exactly what I need when I’m focused on shooting and talking, not flying.

View fullsize

For control, I can either use the phone app for quick AI “follow me” and smart shots, or the RC-N3 for longer-range, more traditional drone flying and higher altitude shots. There’s also a very cool gesture control system (I call it “Jedi mode”) where I can move the drone up, down, left, right, closer or further just by using hand signals, no need to stop recording or dig through menus.

Bottom line: you probably won’t see the DJI Neo 2 in many of my videos, but you’ll definitely see what it captures. It lets me add smoother tracking shots, aerial views and more dynamic angles to my Replica Airguns content, all without needing a dedicated camera person. For a solo creator who films a lot outdoors, it’s a very handy tool to have in the bag.

Type: Airsoft Rifle
Manufacturer: KJWorks
Model: M700 Take Down
Materials: Metal with textured synthetic stock
Weight: 7.5 pounds (3415 grams)
Barrel: Smooth bore barrel
Propulsion: Gas operated (Green Gas or Propane)
Action: Bolt
Ammunition Type: 6mm plastic Airsoft BB’s
Ammunition Capacity: 10–11 round metal magazine
FPS: Up to 450 FPS

View fullsize

Trigger Pull: The trigger on the KJWorks M700 Take Down Gas Airsoft Sniper Rifle performs as expected for a bolt-action style hunting or sniper rifle. Most of the work is done when operating the bolt, leaving your trigger finger with a light, short, and crisp pull to release the firing pin. This shlep a lot keeping everything steady since you can relax your grip adn really focus on your shot placement.

View fullsize

Accuracy: Be sure to watch my full Field Test Shooting Video for the KJWorks M700 Take Down Gas Airsoft Sniper Rifle to see its performance in detail. I only tested it indoors at my Sea Can range due to cold weather conditions, which aren’t ideal for gas guns. Shooting distance was limited to about 30 feet, but I plan to revisit this rifle outdoors in better weather for longer-range results. At 30 feet, the M700 produced a tight 1-inch grouping and averaged around 400 FPS using .25-gram Airsoft BB’s.
Note: I did encounter some magazine loading issues when fully loaded, BBs from the right side of the double-stack magazine occasionally jammed and didn’t feed properly into the breach.

View fullsize

Build Quality: The KJWorks M700 Take Down Gas Airsoft Sniper Rifle feels solid and well-made throughout. The fit and finish are good, and all the mechanical components functioned properly aside from the occasional BB feed issue. I like the textured synthetic stock and soft rubber butt pad. This rifle features a lot of metal construction, including the bolt, inner and outer barrel, magazine, sling and bipod mounts, trigger and guard, Picatinny rail, and safety. It feels robust and well-balanced overall.

View fullsize

Realism: The KJWorks M700 is modeled after the Remington 700 platform, giving it a very authentic hunting rifle look. The Airsoft version mimics the real firearm closely in both form and function. Since it’s powered by Green Gas rather than a spring, the bolt action is smooth, light, and realistic to operate. All the parts that would normally be metal or steel on the actual Remington M700 are also made out of Metal with the Airsoft version. The stock is also Fiber reinforced like the real stele version.

View fullsize

Pros:

• Gas-operated bolt is far easier to cycle than a traditional spring-powered bolt rifle.

• Heavy use of metal parts throughout.

• Excellent balance and solid overall feel.

• Take-down design makes it easy to transport and store.

• Fiber-reinforced stock adds durability.

• Metal sling and bipod mounts for customization.

• Full-size drop-out metal magazine holds both gas and BBs.

• Easy-to-adjust hop-up screw.

• Ideal FPS for long-range shots without being overpowered.

• Consistent accuracy, good 30-foot performance should translate well to longer distances.

View fullsize

Cons:

• No sights or optics included, you’ll need to add your own.

• Occasional magazine feeding issues, especially when fully loaded.

• Slightly higher price compared to most spring-powered bolt-action Airsoft rifles.

View fullsize

Comments:
I’ve tested a few spring bolt-action Airsoft rifles before, and while those are simple (just load BBs and shoot), the gas-powered M700 offers a much smoother and faster bolt operation, perfect for quick follow-up shots. When seconds matter and targets are closing in, that speed can make a real difference.

The KJWorks M700 Take Down Gas Airsoft Sniper Rifle is a great ready-to-shoot platform out of the box and can be easily upgraded with a sling, bipod, and of course, a scope, since it comes without sights.

My review unit had a minor magazine issue, but I believe this was specific to the sample I received and not a widespread problem. Overall, it’s a very capable and well-built Airsoft sniper rifle that delivers solid power, realism, and usability.

• Buy the G&G RK Beta AK AEG Airsoft Rifle in Canada

• Buy the AK AEG Airsoft Rifles in the US

View fullsize

I tested another Steambow model in this Field Test Shooting Video, the Steambow AR Series M10 Tactical Crossbow. Like my other Crossbow Field Test videos, I recorded the Chronograph velocity while I was shooting the target so there was no need for separate segments, everything was done in one go with four cameras rolling. I didn’t put a dedicated camera on the Chronograph because I wanted a camera on the target; my camera glasses generally pick up the chrono readings anyway. I only have so many cameras, but everything recorded as planned. If you want the full specs and a closer look at the M10, watch my dedicated Table Top video.

Steambow quotes about 190–200 fps for the AR Series M10. My six chrono readings were 189, 191, 189, 189, 190 and 191, which worked out to a 190 fps average. Using the included 142-grain, 6.5-inch aluminum bolts produced roughly 11.4 foot-pounds of energy, so both velocity and FPE were basically on target with Steambow’s numbers. That’s adequate for small pests, but humane shots always come down to accuracy, you’ll want head or shoulder placement, and I’m not ready to declare any compact crossbow a guaranteed solution for that. Test accuracy for yourself.

View fullsize

For accuracy I shot six rounds at a paper target 30 feet downrange from my usual seated in the back, hands rested up front shooting position. The first shot from the Steambow AR Series M10 Tactical Crossbow was a few inches low, so I adjusted my point of aim up and ended up with an impressive 1-inch, 4-shot group just left of center. One bolt missed the target entirely, could have been me or a bad bolt (I’ll blame the bolt on that one). Still, for a compact crossbow this was an excellent result, comparable to some pellet rifles.

Overall the Steambow AR Series M10 Tactical Crossbow performed really well. I like the cocking and bolt-feeding system, cocking is simple: shoulder the stock, press the release, then pull the front down using the foregrip for leverage. Even with the higher power of this model you don’t need a lot of strength, and with practice follow-up shots can be quick. I’d add a red dot to the rail to help dial in accuracy and buy a few extra bolts for target practice and hunting. The M10 is one of Steambow’s pricier offerings, but it also has the highest ammo capacity and the most customization options. If you want the ultimate compact crossbow setup, the ability to preload multiple bolts and have extra 10-shot magazines on hand makes the M10 the one to consider.

• Buy the Steambow M10 Tactical Recurve Crossbow in Canada

• Buy Compact Recurve Crossbow in the US

View fullsize

I’ve tested a few compact crossbows before, but nothing with a multi-bolt loading system like the Steambow setup I’m testing in this video. As with my other Crossbow Field Test videos, I recorded Chronograph velocity at the same time I was shooting the target so I didn’t need two separate segments, I did it all in one pass with lots of cameras rolling. I didn’t dedicate a camera to the Chronograph for this test because I wanted a camera focused on the target; my camera glasses usually capture the Chronograph readings for me. I only have so many cameras, but everything was captured fine. If you want to learn more about the specifications and details of the Steambow AR-6 Stinger II, then watch my dedicated Table Top Video located here.

Steambow lists 180 fps as the claimed velocity for the Steambow AR-6 Stinger II Tactical. I consistently measured right around 160 fps, pretty close to the claim. Using the included 142-grain, 6.5-inch aluminum bolts my chrono readings ranged from 159 to 164 fps, averaging 163 fps, which is very consistent. That produced about 8.4 foot-pounds of energy, so both velocity and FPE were a little under Steambow’s stated numbers. That’s enough for small pests, but humane shots depend on accuracy, you’ll want head or shoulder placement, and I’m not fully convinced this bow is always up to that task. You’ll need to judge its accuracy for your own use.

View fullsize

On elevation (up and down) the Steambow AR-6 Stinger II was fairly accurate. Where it struggled more was windage: I had to aim noticeably to the right to move bolts toward the bullseye. The sight is very basic (a single fiber-optic post just behind of the Picatinny rail), which likely contributed to the windage issue. Despite that, I managed a roughly 4-inch group at 30 feet, with one bolt behaving like a flyer.

Overall the Steambow AR-6 Stinger II performed well. I really like the cocking and bolt-feeding system — cocking is easy by shouldering the stock, pressing the release, then pulling the front of the bow down using the foregrip for leverage. You don’t need to be super strong to do it, and with practice you could get very quick at follow-up shots. I’d definitely add a red dot to the rail to help dial in accuracy, and I’d buy a few extra bolts for target and hunting. The AR-6 Stinger II is pricier than some basic models, but the ability to preload multiple bolts in the built-in clip and unleash six shots in seconds makes the extra cost worth it to me.

• Buy the Steambow AR-6 Stinger II Tactical in Canada

• Buy Compact Recurve Crossbow in the US

View fullsize

If you want the full tabletop details on the G&G RK Beta AK AEG, check my Table Top Video, it covers features, controls and build in close-up. For this Field Test Shooting Video I moved into the Replica Airguns indoor sea-can range to run practical checks: chronograph testing to measure real-world velocity with field-weight BBs, then live-fire accuracy checks in both semi-auto and sustained full-auto to see how it behaves under realistic use.

Starting with the chrono work, for the G&G RK Beta AK AEG Airsoft Rifle I ran seven shots through my Chronograph using .25-gram BBs (I usually test with the slightly heavier .25s because they better represent what players use in the field rather than ultra-light test rounds). G&G rates the rifle at about 390 fps with .20-gram BBs, so I expected a lower result with .25g ammo, which is exactly what I got. My seven-shot string read: 371, 372, 370, 371, 349, 369 and 370, an average of about 367 fps. Only one shot dropped below 350 fps and the rest clustered right around 370, so velocity was consistent and predictable for a field setup and close to the claimed 390 even with heavier rounds.

View fullsize

For accuracy I placed a fresh pepper target to my ammo trap at 30 feet and fired a 10-round semi-rested string: hands braced on a sandbag up front and seated on a stool at the rear for a repeatable hold. Out of the box, using the open sights, I put most shots into a tight ~1.5-inch group with just one flyer just outside the main cluster. Hits were slightly high and a touch right of center, not surprising given there’s essentially no refined rear sight on this sample, so I was eyeballing the aim a bit. I then switched to full auto and basically shot until the spring tension softened, well over 100 rounds went into the trap. As expected the group opened up under sustained fire, but impacts still concentrated in roughly the same zone as the 10-shot semi-auto grouping earlier, roughly a 3-inch spread overall. Imagine how much tighter those strings would get with a proper optic or red dot fitted.

My take: it’s refreshing to test out an AK-style AEG instead of another AR-variant, the G&G RK Beta AK AEG Airsoft Rifle feels beefier and more planted, and that solid construction pays off in handling and perceived durability. The chrono numbers and on-target accuracy with .25g BBs put the rifle right in the sweet spot for short-to-mid-range field work, and performance remained respectable even without a precision sighting system. You’ll want to add a red dot or other optic to unlock the rifle’s full potential, but if you’re after a compact, rugged AK AEG that shoots consistently and groups well under both semi and full auto, the G&G RK Beta AK is worth any extra outlay.

• Buy the G&G RK Beta AK AEG Airsoft Rifle in Canada

• Buy the AK AEG Airsoft Rifles in the US

View fullsize

If you want the complete specs and a tabletop walk-through for the G&G ARP9 3.0P AEG Pistol-Caliber Carbine, watch my Table Top Video where I cover build, controls and features in close detail. For this Field Test Shooting Video I moved into the Replica Airguns indoor sea-can range to put the G&G ARP9 3.0P AEG Pistol Caliber Airsoft Carbine through practical shooting checks, chrono testing for real-world velocity and live shooting to see how it groups in both semi-auto and full-auto. The sea-can gives a repeatable, controlled environment that’s ideal for comparing performance to other AEGs I’ve tested.

For velocity I ran six shots through my Chronograph using .25-gram BBs — I generally prefer the slightly heavier .25s for testing because they better represent practical use than lighter .20 gram rounds. G&G’s spec is about 380 fps with .20-gram BBs, so I anticipated a lower number with .25s and that’s exactly what I saw. My six-shot string read 344, 342, 342, 342, 341 and 341, which averaged out to 342 fps. Those readings were very consistent with multiple duplicates in the string, so the ARP9’s output was predictable and stable for an AEG running typical field BBs.

View fullsize

Next I moved to accuracy: I placed a fresh pepper target to the trap at 30 feet and shot 10 rounds from a semi-rested position, hands braced on a sandbag up front, seated on a stool at the rear for a stable, repeatable hold. The main cluster landed just left of the bullseye; the densest portion of the group was roughly 1 inch and the overall group measured just over 2 inches. That tells me the G&G ARP9 3.0P AEG Pistol Caliber Airsoft Carbine is more than capable of tight, repeatable groups when shot carefully. I then switched to full auto and ran a mag dump of about 58 rounds from a full rest. As you’d expect the group opened up and shifted a bit (likely from my hold changing during sustained fire), but most hits still stayed within approximately a 2-inch radius, which is impressive for a compact, high-rate AEG under sustained fire.

My hands-on impression is that the ARP9 3.0P hits a very useful sweet spot: it’s compact and maneuverable for CQB but doesn’t feel like it gives up accuracy or usable range compared to larger AEG platforms. With the factory wide-open rear aperture I was getting solid contact on target, putting a red dot or small optic on the top rail would tighten things further and make follow-ups easier. Power and consistency are right where I’d want them for a short-to-mid-range compact rifle, and while it’s not the cheapest AEG on the market it feels well made and worth the price for anyone after a versatile, high-quality compact AEG. If you want both a practical CQB carbine and a reliable field performer, the ARP9 3.0P is definitely worth considering.

• Buy the G&G ARP9 3.0P AEG Pistol Caliber Airsoft Carbine in Canada

• Buy AEG Airsoft Rifles in the US

View fullsize

I first reviewed the KJWorks M700P (the “P” for Power) back in 2018, so I was curious to see how the standard take-down version would perform. Ideally you’d mount a 3x (or higher) optic and test it at outdoor sniper ranges more typical for Airsoft sniper play, but the weather was rubbish for this session. Like last time with the M700P, I ended up doing the review inside my sea-can airgun range, which is fine for chronograph work but limits targets to about 30 feet.

For the indoor velocity test of the KJWorks M700 Take Down Gas Airsoft Sniper Rifle, I shot .25-gram plastic BBs through my Chrony. Over a five-shot string I averaged 403 fps, slowest was 400 fps and the fastest 406 fps, so reasonably consistent for a gas rifle. The gas mag was fully topped up with propane and the ambient temp was about 17°C (63°F). Lighter .20-gram BBs would of course register higher speeds, though in sniper builds you’ll often end up using heavier BBs than .20 g for better downrange performance.

View fullsize

Using the same .25-gram BBs for a close-range accuracy test at roughly 30 feet, the M700 Take-Down put most shots into about a 1-inch group with one odd flyer out to the right, could have been a bad BB or user error. I ran the test with a simple red dot since the rifle ships with no sights and I only needed something quick on the Picatinny rail for close work. I also had trouble getting all ten rounds from the 10-round mag onto the target because of some misfeeds / misreads; I don’t recall the M700P exhibiting this behavior, so it may be a quirk specific to my test unit.

Overall the KJWorks M700 Take Down Gas Airsoft Sniper Rifle is a nicely executed sniper-style Airsoft rifle — very easy to dismantle and carry in a pack, reasonably gas-efficient, quiet, and powerful enough for the role. The feeding hiccup seemed to crop up when the follower was near the top of the stack (spring tension at its peak) and mainly affected BBs on the right side of the double-stack magazine — which makes me suspect a defect in my sample rather than a design choice. It doesn’t come with sights, so you’ll need to pick up a scope or optic, and personally I prefer the take-down model for its extra versatility.

• Buy the KJWorks M700 Take Down Gas Airsoft Sniper Rifle in Canada

• Buy Airsoft Sniper Rifles in the US

View fullsize

In this Field Test Shooting video for the Umarex Marlin Old West CO2 BB Revolver I check real-world performance: first I measure fps using a fresh standard 12-gram CO2 cartridge and 4.5 mm steel BBs through my chronograph. After that I hang a paper target at 30 feet and fire 10 rounds using the Single-Action-Only trigger to see what kind of grouping the revolver delivers straight out of the box. If you haven’t already seen my Tabletop Video Review for the John Wayne Marshal CO2 BB Revolver, watch that for full specs and close-up footage.

For the velocity test I put five shots through the chronograph. The slowest registered 345 fps and the fastest hit 416 fps, with an average of 403 fps, right in line with Umarex’s claimed 400 fps. Perfect for popping cans and casual plinking out to roughly 30–40 feet. The test was done inside a sea can at about 18°C (≈64°F), which gives a middle-of-the-road CO2 performance; warmer weather will typically push velocities higher.

View fullsize

Next I set the paper target on my pellet trap at 30 feet. Using my usual semi-rested position (hands braced on a front sandbag and seated on a stool), I fired 10 rounds with the Marlin Old West. The group measured roughly 4 inches, a bit left and just slightly high from the bullseye — not far off and similar to the grouping I got with the John Wayne Marshal CO2 BB Revolver, although the Marlin’s velocity numbers were notably higher.

The Umarex Marlin Old West CO2 BB Revolver is an inexpensive, mostly-plastic Single Action Army style revolver. There’s a fair amount of polymer in the construction, but it still feels solid despite being on the lighter side. That lighter weight can make the gun feel a bit twitchy in the hand compared with heavier replicas, which can affect accuracy. At the time of this video the Canadian price was about $99, which makes it good value — especially since it loads 18 rounds quickly compared with traditional shell-loading revolvers, meaning more trigger time with less fuss. There are a number of similar replica revolvers available from our Replica Airguns stores in Canada and the US, so check our stock if you’re shopping around.

• Buy the John Wayne Marshal CO2 BB Revolver in Canada

• Buy the John Wayne Marshal CO2 BB Revolver in the US

View fullsize

Type: BB Pistol.
Manufacturer: Distributed by Umarex
Model: Marlin Old West Revolver
Materials: Mostly plastic, some internal metal parts.
Weight: 1.2 pound (544 grams).
Total Length: 10.5 inches (26.6cm).
Barrel: 5.5 inches 14cm) metal non-rifled.
Propulsion: CO2.
Action: Revolver SAO.
Ammunition Type: 4.5mm Steel BB’s.
Ammunition Capacity: 18 round internal magazine.
FPS: Claimed 400.

View fullsize

Trigger Pull: The trigger on the Umarex Marlin Old West CO2 BB Revolver is single-action-only, so you must cock the hammer before each shot. That removes most of the trigger travel and effort, giving the Marshal a short, light, and easy-to-manage pull. It’s ideal for deliberate, accurate shooting, but less suited to action-style rapid fire unless you’ve got a very fast thumb.

View fullsize

Accuracy: I haven’t tested the Marlin Old West model specifically, but it should perform very similarly to the John Wayne Marshal CO2 BB revolver, they’re nearly identical aside from licensing, safety, and magazine placement. In my field test of the John Wayne Marshal it averaged closer to 360 fps rather than the claimed 420 fps and produced roughly a 4-inch, 10-shot group at 30 feet. You can watch that video here; I’ll hope to be posting a dedicated field test for the Umarex Marlin Old West soon.

View fullsize

Build Quality: There’s not a lot to get excited about in terms of materials, the Umarex Marlin Old West CO2 BB Revolver is mostly plastic with some internal metal parts like the barrel, trigger, hammer, and CO2 components. It follows the common two-half, screwed-together budget construction, which looks cleaner on the side where the screws are hidden. At just over a pound it’s fairly light. With relatively few moving parts, it should be reasonably reliable; the mechanical components do what they need to do and feel suitably solid for the price.

View fullsize

Realism: At first glance the John Wayne Marshal CO2 BB revolver resembles a Colt Single Action Army Revolver in shape and size, but it’s much lighter, about half the weight. The lack of real bullet openings in the cylinder (when viewed from the front) reduces realism. I’m used to the newer generation of revolvers with working cylinders and loadable, removable shells; those are pricier and hold fewer rounds, but they offer a much more authentic experience.

View fullsize

Pros:

• A decent looking replica of a Colt Single Action Army Revolver.

• Single action only trigger is short and light and well suited to careful shot placement shooting.

• 400 claimed fps is about perfect for plinking at ranges up 30-40 feet.

• 18 round magazine has a nice high capacity and easy to load when empty.

• Should get lots of shots per CO2.

• Safety is well hidden underneath just in front of the trigger guard.

• I like the look with the all black receiver and simulated wood grips.

• CO2 Allen key is built into grip so always have it on hand and will not lose it.

• Marlin licensed and seems to be $50 less than the almost exact same John Wayne version.

Cons:

• Mostly plastic builds makes it a bit light in the hand.

• No fake shell holes in the front of the cylinder, could have added this for a more genuine look.

• Not a big fan of the clamshell plastic packaging.

View fullsize

Comments:
The Umarex Marlin Old West CO2 BB Revolver is a solid choice if you want an old-west single-action cowboy BB shooter for less than the nearly identical John Wayne Marshal (it’s about $50 cheaper). If you want more authenticity, consider one of the shell-loading Single Action Army style revolvers, they cost more, shoot a bit slower, and carry fewer rounds, but they deliver a much higher level of realism.

• Buy the Umarex Marlin Old West CO2 BB Revolver In Canada

• Buy the Umarex Marlin Old West CO2 BB Revolver in the US

View fullsize

Type: BB Pistol.
Manufacturer: Distributed by Umarex.
Model: DS11 1911.
Materials: Mostly plastic with some internal metal parts.
Weight: 1.06 pounds (481 grams).
Total Length: 8.86 inches (22.5cm).
Barrel: 4.5 inch barrel (11.3cm) smooth bore.
Propulsion: CO2
Action: Semi auto NBB, DAO trigger.
Ammunition Type: 4.5mm steel BB's.
Ammunition Capacity: 18 round metal stick magazine.
FPS: Claimed 400.

View fullsize

Trigger Pull: The Umarex DS11 1911 NBB CO2 BB Pistol’s trigger feels exactly like you’d expect from a low-cost double-action-only CO2 pistol. The trigger does the heavy lifting. You’re pulling against a fairly stiff internal hammer spring (inside the barrel assembly) until it releases, snaps the hammer back, and opens the valve to fire. Run through the 18-round mag fast and your trigger finger will definitely notice.

View fullsize

Accuracy: II’ve already completed a full field test of the Umarex DS11, which is a bit out of my usual order, so I can share performance feedback now. On average it clocked 382 fps over five shots on my chronograph. From my standard paper target at 30 feet, a 10-shot group measured roughly 2 inches and was well centered, with several rounds landing in the bull’s-eye. You can watch the video here!

View fullsize

Build Quality: The Umarex DS11 1911 NBB CO2 BB Pistol is constructed almost entirely from plastic, keeping its weight just over a pound. While it lacks the heft of a full-metal replica, the lighter build makes it more forgiving if dropped on a hard surface. The fit and finish are solid, and its two-piece design secured mainly from the left side features very few moving parts or controls, which should contribute to excellent durability and reliability.

View fullsize

Realism: The Umarex DS11 is styled after the classic 1911 with a modern tactical look. It uses a double-action-only (DAO) trigger that’s relatively long and a bit heavy, not the short, feather-light feel of a true single-action 1911 trigger. The barrel is recessed and the CO2 is neatly hidden in the grips, so at a glance it could pass for the real thing. Up close, however, there are giveaways: a molded hammer, molded safety and slide-release, visible screws along the left side, and a seam where the two halves join.s.

View fullsize

Pros:

• Low price well under $100 Canadian.

• Shoots pretty decent, almost 400 fps and a nice 2 inch grouping fairly well centered out of the box.

• Decent looking Replica of a modern 1911 Semi Auto Pistol. A lot more detail than most base non block CO2 BB Pistol.

• Has a picatinny rail for adding accessories if you want to.

• Double Action Trigger is pretty decent, Not going to be a super fast action shooter but it is manageable for a DAO trigger.

• Uses the standard all metal stick magazine found inmost of these NBB CO2 BB Pistols.

• I like the cut out in the slide showing off the gold inner barrel and ejection port.

• Safety is not the typical on off style, more thought went into this one adn it looks better too.

• Recessed barrel for added realism.

• CO2 tab is fairly well hidden.

Cons:

• Almost all plastic other than some internal metal parts like the barrel and spring and some other stuff I am sure.

• DOA trigger a bit heavy but about the same as other similar Airguns like this one.

• Sights are not adjustable and are all black with no white dots.

View fullsize

Comments:
The Umarex DS11 1911 NBB CO2 BB Pistol is a more thoughtfully designed and better-looking 4.5mm CO2 BB NBB Airgun than the typical budget options. It uses the common metal stick magazine, which is convenient since you more than likely have a bunch lying around and you can keep several preloaded and spend more time shooting and less time reloading on site. It also ships in a proper box, which adds to the premium feel. In my test at the Replica Airguns Indoor Shooting Range it performed very well.

• Buy the Umarex DS11 1911 NBB CO2 4.5mm BB Pistol in Canada

• Buy the Umarex DS11 1911 NBB CO2 4.5mm BB Pistol in the US

View fullsize

I took the Umarex DS11 1911 NBB CO2 4.5mm BB Pistol out to the Replica Airguns Indoor Shooting Range today for some hands-on testing to see how it performs in real-world conditions. I haven’t filmed the full Table Top Review Video for this model just yet, but that’s coming soon. For this initial session, I wanted to focus strictly on performance, specifically testing velocity and accuracy. I ran a quick multi-shot chronograph session to get an average fps reading and followed that up with a 10-shot grouping test at 30 feet to get a practical sense of how accurate this pistol is right out of the box.

For the chronograph test, I used a fresh 12-gram CO2 cartridge and standard 4.5mm steel BBs. The room temperature was about 20°C. I noticed the velocity seemed to climb slightly as the CO2 settled in, so I averaged out the last five readings for consistency. Those shots came in at 386, 383, 377, 385, and 377 fps, giving an average of 382 fps. That’s very close to the manufacturer’s claimed 400 fps, and I’d expect it to reach or even exceed that number under warmer conditions. Overall, the DS11 delivered solid and consistent power for a non-blowback CO2 pistol.

View fullsize

Moving on to accuracy, I set up a target at 30 feet and fired from a semi-rested position, seated on a stool with my hands braced against a sandbag for stability. The Umarex DS11 1911 NBB CO2 4.5mm BB Pistol shot impressively well-centered right out of the box, which is a big plus since the sights are non-adjustable. My 10-shot group measured about 2.5 inches, with several rounds landing right in the bullseye. With a bit more trigger time and familiarity with the gun’s feel, I’m confident I could tighten that group even further.

All things considered, the Umarex DS11 1911 NBB CO₂ BB Pistol makes an excellent entry-level 4.5mm BB pistol for anyone looking for a tactical-style 1911 that’s affordable, reliable, and fun to shoot. Despite its simple, mostly polymer build, it looks great and feels comfortable in the hand. You can expect over 100 shots per CO₂2 cartridge, making it efficient and economical to shoot. Performance-wise, it’s got good power, accurate shooting right out of the box, and a straightforward design that should prove dependable over time.

In short, the Umarex DS11 1911 NBB is a great budget-friendly option that doesn’t sacrifice performance, and I have to say, it looks sharp for a basic, non-blowback BB shooter.

• Buy the Umarex DS11 1911 NBB CO2 4.5mm BB Pistol in Canada

• Buy the Umarex DS11 1911 NBB CO2 4.5mm BB Pistol in the US

View fullsize

In this field test video, I put the Umarex AER16 AEG Full Auto 4.5mm BB Carbine through its paces to measure velocity, accuracy, and get a sense of the rate of fire in full-auto mode. The box claims a rate of 450 rounds per minute using the included 11.1-volt battery, so I wanted to see how close that claim is in real-world testing. If you’d like more information on specifications and features for the Umarex AER16, check out my Table Top Video for it here.

Starting with the velocity test, I fired several rounds through my chronograph and averaged the last five shots to get a reliable reading. The result was 444 fps, which is slightly higher than the claimed 430 fps, a nice surprise. Since the AER16 is an electric AEG and doesn’t use CO2, temperature has no effect on performance. Likewise, battery voltage doesn’t affect velocity as long as there’s enough power for the motor to fully pull back the spring. Only the trigger response and rate of fire change depending on the voltage.

View fullsize

Next, I moved on to accuracy testing. Using a full 55-round magazine, I fired 10 shots fairly quickly from a seated position at a target set 30 feet away, with the rifle resting on a sandbag. The result was an impressive 1.5-inch 10-shot grouping, landing just slightly high and to the right of the bullseye, easily corrected since the iron sights are fully adjustable. Switching over to full-auto, I dumped the remaining 35 or so rounds into the same target. The group opened up a bit, but not much, showing that the Umarex AER16 AEG Full Auto 4.5mm BB Carbine maintains solid accuracy in both semi and full-auto modes.

As for the rate of fire, the AER16 feels a bit slow even with the 11.1-volt battery, especially compared to some Airsoft AEGs using the same voltage. That said, the slower rate of fire actually makes it more manageable and a lot of fun to shoot, with excellent consistency thanks to the absence of CO2 cooldown. The overall build combines metal and polymer components, giving it a durable yet lightweight feel compared to something heavier like the Barra 400e, which has more metal construction.

If you’re looking for an AEG 4.5mm BB rifle that comes closest to a real AR in looks, feel, and handling, the Umarex AER16 is a top-tier choice.

• Buy the Umarex AER16 AEG full-auto BB Carbine in Canada

• Buy the Umarex AER16 AEG full-auto BB Carbine in the US

Type: BB Rifle.
Manufacturer: Umarex.
Model: AER16.
Materials: Metal and plastic build.
Weight: 4.9 pounds (2.2 kilograms).
Length: 32.25-35.5 inches (82-90.2cm).
Propulsion: AEG (with Deans Connectors).
Battery: Comes with an 11.1 V 120 Mac Battery and USB Charger.
Action: Semi & Full Auto.
Ammunition Type: 4.5mm steel BB's.
Ammunition Capacity: 55 rounds. (650 shots per battery charge Aprox.)
FPS: 430fps.
Rate of Fire: 450+ rounds per minute in full auto (depending on battery voltage).

View fullsize

Trigger Pull: The trigger on the Umarex AER16 AEG full-auto BB Carbine, like most AEGs, isn’t a purely mechanical trigger. It works as an electrical on/off switch, so it feels more like a light, short single-action pull. You’ll notice a small delay between pulling the trigger and the BB firing because the trigger starts a motor that first pulls the spring and piston back. Once the spring is fully drawn and released, it compresses air that propels the 4.5 mm steel BB. Using a higher-voltage battery reduces that delay, since the motor spins faster and returns the spring more quickly, which also raises the full-auto rate of fire.

View fullsize

Accuracy: I have not Field Test Reviewed the Umarex AER16 AEG full-auto BB Carbine or even tried it out yet so far, I hope to make my Field Test Shooting Video for it as soon as I can as I am very interested in how the AER16 performs compared to the Barra 400e which is a very similar AEG 4.5mm BB firing Airgun. If the AER16 shoots anything like the Barra 400e,I can expect it to shoot pretty close to 400 fps, with near 1 inch 10 round groupings in semi auto and slightly larger groups in full auto. You can checkout my Barra 400e Field test here.

View fullsize

Build Quality: The Umarex AER16 AEG full-auto BB Carbine is metal and Plastic in design with a plastic hand guard and receiver. That said, it does have a lot of metal parts including the barrel, buffer tube, magazine, trigger, charging handle, magazine release, dust cover, inner bolt shield, selector switch, sling mount and other bolts and pins! It feels very solid when holding it and the fit and finishes is really good. Since there is less metal all around then you find with the Barra 400e, this makes the AER16 a fair bit lighter coming around 5 pounds versus the Barra’s 7.5 pounds.

View fullsize

Realism: The Umarex AER16 AEG full-auto BB Carbine is based on the AR platform in terms of its overall design without any specific licensing other than Umarex branding. It does have a lot of working parts including the charging handle which opens the dust cover showing the simulated bolt. There is no Hop-up like you would find in a similar Airsoft Rifle but with BB’s this is not so much of a requirement. You will also find a working magazine release for the all metal magazine along with a working selector for semi and full auto shooting. The all metal buffer tube allows for an AR style rear adjustable stock which I would assume you can swap out for just about any AR buffer tube based rear stock.

View fullsize

Pros:

• No CO2 required so cost to shoot is less.

• Comes with high volt LiPo battery and charger

• Very consistent velocity as there is no cool down effect from CO2 cooling the gun (Just like an AEG Airsoft rifle).

• Have the option to shoot in semi or full auto modes.

• Lots of metal in construction (buffer tube, magazine, barrel, trigger, dust cover, charging handle, safety switch, magazine release sling mount.

• Lots of rail option for mounting accessories.

• Flip up removable sights with fully adjustable rear peep sight (single aperture).

• 6 position adjustable rear stock.

• Nice high capacity 55 round magazine, easy and fast to reload with speed loader.

• Lots of working parts including the charging handle, dust cover, magazine release, selector switch.

• Comes with safe storage bag for LiPo battery (no fear of burning your house down).

View fullsize

Cons:

• No blowback operation as with some other Full Auto BB Rifles like the Crosman AR Series.

• Receiver is plastic not metal.

• When battery is installed you can not use all the shorter positions of the adjustable rear stock.

View fullsize

Comments:

The Umarex AER16 AEG full-auto BB Carbine is a nice addition from Umarex to what Barra came out with a year or so ago with their 400e AEG Rifle. I like that the AER16 is a true AR Replica which is a very popular design and it is a lot lighter than the kind of heft 7.5 pound Barra 400e which may be a bit much for some smaller or lighter shooters to handle. The Umarex AER16 AEG full-auto BB Carbine also has the advantage that it comes with an included 1.11V 1200mAH LiPo batter and USB Charger so no further purchasing is required to shoot it other than some BB’s which most Air gunners will normally have on hand. One last point to make is that the AER16 is the less expensive option over the Gen 2 Barra 400e that come in both metal and polymer version.

• Buy the Umarex AER16 AEG full-auto BB Carbine in Canada

• Buy the Umarex AER16 AEG full-auto BB Carbine in the US