Entries in .50 cal,GBB

KJWorks KP01-E2 (Sig Sauer P226) CO2 Blowback Airsoft Pistol Table Top Review

No Comments

Type: 6mm Plastic BB Airsoft Pistols.

Manufacturer: KJWorks

Model:KP01-E2 Sig Sauer P226

Materials: Metal slide & frame.

Weight: 2 pounds (920 grams).

Barrel: Metalnon-rifled smooth bore.

Propulsion: 12 Gram CO2.

Action: Single and double action.

Ammunition Type: 6mm plastic Airsoft BB's.

Ammunition Capacity: 26 rounds.

FPS: 350-400 fps

Trigger Pull: The trigger pull on the KJWorks KP01-E2 Sig Sauer P226 Airsoft Replica is good in both single and double action. Once the slide is pulled back and released the first round is chambered and the hammer will remain back placing the KJWorks P226 in single action mode, the pull is light and the take-up is nice and short, most of your shots will be in single action mode unless you use the de-cocker to lower the hammer for a subsequent double action follow-up shot, double action shots are still pretty light but much longer in order to cock the hammer back.

Accuracy: (I have not shot the KJWorks distributed CO2 Mag version but I have already done a Field Test Shootinng Review for the same KJWORKS gun distributed and licensed by Cybergun in the Gas Mag version. Here is what I had to say about the Cybergun Gas Magazine version: "Shooting the Cybergun Sig P226 from 20 feet out in semi rested position I was able to get very good results. I placed 10 rounds in about 1.5 inches with the shot placement being a bit low possibly due to my barrel mod, adjusting the hop-up may bring the aim point back up to where it should be. The Sig Sauer P226 Airsoft Replica shot right around the 316 fps range while conducting my 5 shot average chrony testing which was lower than advertised but I was using much heavier .20 gram BB's. You can expect to get a full magazine worth of shots out of each gas fill-up but I did notice that as the magazine got colder it did tend to become much less efficient and also seemed to vent a lot of vapor."

Build Quality: The build quality for all KJWorks guns in my opinion is one of the best in the business. Fit and finish is top notch with close tolerances in the working parts as you would find in a real steel gun. The paint is excellent and in general will wear much better than other Airsoft guns out there. The KJWorks KP01-E2 (Sig Sauer P226) CO2 Blowback Airsoft Pistol is pretty much all metal and feels it, the recoil spring is nice and firm and all working parts are smooth and crisp when operated.

Realism: The KJWorks KP01-E2 (Sig Sauer P226) CO2 Blowback Airsoft Pistol is a replica of the real steel Sig Sauer P226 with the exception of the licensing. The KJWorks KP01-E2 really is a great looking and functioning Airsoft Replica. You can field strip this gun exactly like a real Sig Sauer and all the mechanical parts work just the same including a working de-cocker and adjustable front sight. It is really hard to distinguish the Airsoft version from the real Sig P226 in both looks and feel.

Available in the:Replica Airguns Store

Pros:

  • All metal pistol with good overall realistic weight to it.

  • Very crisp and firm full blowback operation.

  • Some of the best fit and finish in the industry. Especially in price range.

  • Nice accurate looking and working Sig Sauer P226 Replica.

  • Working de-cocker.

  • White dot sights for quick target acquisition.

  • Front sight is adjustable for windage.

  • Full size drop out magazine holds Airsoft BB's and CO2.

  • Fully field strip-able.

Cons:

  • No actual Sig Sauer Licensing but very clean look.

  • CO2 Mag does stick out a bit and add to size

Comments:

I am a huge Sig Sauer fan so I have kind of high expectations with a replica gun! The KJWorks lineup as a whole is really fantastic, and what I say about the KJWorks KP01-E2 (Sig Sauer P226) CO2 Blowback Airsoft Pistol can be said about the entire lineup. KJWorks makes a super well built product that replicates the real steal version almost exactly other then they shoot Airsoft BB's instead of actual bullets. When holding a KJWorks gun in the hand you can feel the quality, in weight, ballence and especially when operating the slide, trigger and other working parts. Everything just feels so perfect and responsive. For the money you can not go wrong with the KJWorks KP01-E2 (Sig Sauer P226) CO2 Blowback Airsoft Pistol or any other KJWorks gun for that matter.

My Vimeo Table Top  Review of the KJWorks KP01-E2 (Sig Sauer P226) CO2 Blowback Airsoft Pistol:

Categories: 6mm, Blowback, CO2, Comparison, GBB, Gas, Pistol, Review, Semi Auto, YouTube Video Tags: KJWorks, KP01-E2, Sig Sauer P226

First Person Shooting Clay Pigeons with KJWorks M9A1 and 1911

1 Comment

This First Person Shooting Clay Pigeons Video with my KJWorks M9A1 and 1911 Airsoft Pistol is to serve two purposes: Number one and really the only reason needed to make a video like this... To get outside on a nice warm summer day and practice some tactile shooting all while recording it in first person so you can come along and enjoy it with me :)

Secondly I wanted to inform everyone that the video uploads will be a bit lighter for the next week or so since I am on what I call a working holiday. I am focusing on a Fitness Contest this weekend along with a Fitness Expo the following weekend, nothing to do with Replica Airguns but it does coincide with my other Website and YouTube channelGetFitOver40.com. The Fitness contest is the Victoria Cup where I will be competing in the Men's Physique (Masters - Over 40) and (Open - All Ages) divisions. The Fitness Expo is called "theFitExpo" and it is in Anaheim California.

So if you want to watch more of my videos then you will have to checkout my other fitness channel for the next week where I will be posting lots of related content on what's going on fitness wise in my life right now.

Categories: 6mm, Airsoft, Blowback, CO2, Field Test, GBB, Gas, Pistol, Replica Airguns News, Semi Auto, YouTube Video Tags: KJWorks, M9A1, Model 1911

KJWorks CO2 Airsoft Full Metal M9 - M9A1 Table Top Review

3 Comments

Type: Blowback Airsoft Pistols.
Manufacturer: KJWORKS.
Model: M9 & M9A1
Materials: Metal slide & frame.
Weight: 2.1 pounds (950 grams).
Barrel: Metal non-rifled smooth bore.
Propulsion: 12 gram CO2.
Action: Blowback, Single and double action.
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 24 rounds.
FPS: 360+ fps.

Trigger Pull: The trigger pull on the KJWorks Beretta M9 & M9A1 is very good in both single and double action. Double action is a bit longer and heavier than when shooting in single action but not heavy by any means. Single action shooting is short, light and crisp as you would expect when shooting a real steel Beretta 92 style pistol.

Accuracy: I have not done my actual Field Test Shooting video review for the KJWorks M9 and M9A1 Airsoft pistols but I did get the chance to make a short preview video where I shot both guns at some clay pigeons setup around 20 feet away. I was able to pop the center out of the clay pigeons no problem and found that even without any practice I was consistently hitting dead center on most shots. I am not sure exactly what the FPS will be but considering both theses versions of the KJWorks M9 & M9A1 have the CO2 mags they should shoot up into the 360+ fps range using .20 gram Airsoft BB's. Blowback operation is strong and the slides cycle full length. Keep posted for my upcoming Field Test Shooting Video for both pistols.

Build Quality: As expected, the KJWorks M9 & M9A1 build quality is just like all the other KJWorks Airsoft guns I've tested so far, excellent the fit and finish is the best in my opinion even when compared to my my 4.5mm steel BB shooters. When using these guns regularly, areas that are painted like the metal friction areas show very light wear which is rarely the case with metal built blowback Airguns. Again the tolerances between the moving parts like the slide and frame are very tight showing excellent workmanship and machining from KJWorks.

Realism: Both the KJWorks M9 & M9A1 are copies of the real steel popular Beretta M9 & M9A1, it is really hard to tell them apart from the real versions. Both the M9 and M9A1 are very similar in design with the M9A1 having some slight cosmetic differences, the biggest being the addition of a tactical rail built into the frame. Both KJWorks Beretta's can be field stripped in the same manor as a real Beretta M9 Semi Auto pistol and all parts function the same.

Available in the: Replica Airguns Store

Pros: 

  • Pretty much all metal pistols with good weight to them.
  • Full heavy blowback operation.
  • Excellent fit and finish as always with KJWorks pistols.
  • High capacity full size drop out magazine that holds the Airsoft BB’s and CO2. (Can get Green Gas mags)
  • Seem to be very accuracy and well centered on target.
  • White dot sights make it easy to shoot an most backgrounds.
  • Ambidextrous safeties.
  • Field strip-able like the real steel versions.

Cons:

  • Sight are non-adjustable but elevation can be adjusted using the hop-up.
  • Grips may be a bit wide for some small handed people.
  • CO2 magazines sticks out a bit when using the CO2 mags.

Comments:
The KJWorks Full Metal M9 & M9A1 are yet more examples of excellent full blowback Airsoft pistols from KJWorks. They are built to very high standards, are near perfect replicas of the real steel Beretta M9 & M9A1 and performance is also excellent. Yes the price is slightly higher than a similar Airsoft gun from KWC but the quality on the KJWorks is definitely worth the extra cost. Make sure to drop by our Replica Airguns Canada Store and checkout our new lower pricing on the KJWorks line of Airsoft guns.

My YouTube Table Top  Review of the KJWorks M9and M9A1 Full Metal Blowback Airsoft Pistol:

Buy the KJWorks M9A1 Full Metal Airsoft Pistol in Canada

Buy the KJWorks M9 Full Metal Airsoft Pistol in Canada

Categories: 6mm, Airsoft, Blowback, CO2, Comparison, GBB, Gas, Pistol, Review, Semi Auto, YouTube Video Tags: Beretta, KJWorks, M9, M9A1

KJWorks Full Metal CO2 Airsoft 1911 Table Top Review

2 Comments

Type: Blowback Airsoft Pistol.

Manufacturer:KJWORKS.

Model:1911

Materials: Metal slide & frame.

Weight: 2.2 pounds (980 grams).

Barrel: Metalnon-rifled smooth bore.

Propulsion: 12 gram CO2.

Action: Blowback, Single action only.

Ammunition Type: 6mm plastic Airsoft BB's.

Ammunition Capacity: 28 rounds.

FPS: 360+ fps.

Trigger Pull: The trigger pull on the KJWorks 1911 is very good since it is modeled after a real steel 1911 which makes it short and crisp with a very light trigger pull. There is a very slight take-up at the very beginning of the pull but once your get past this the release is crisp and perceptible. Since it is not a double action trigger you will need to either rack the slide for your first shot or pull the hammer back if you have already chambered a round.

Accuracy: I have not done my actual Field Test Shooting video review for the KJWorks 1911 Airsoft Pistol but I did get the chance to make a short preview video where I shot some clay pigeons setup around 20 feet away. The KJWorks Full Metal CO2 Airsoft 1911 was a lot of fun to shoot at the clay pigeons and I had no trouble hitting them form that range over and over again. I am not sure exactly what the FPS will be but considering this version of the KJWorks 1911 has the CO2 mag it should shoot up into the 360+ fps range using .20 gram Airsoft BB's. Blowback operation is strong and the slide cycles full length. Keep posted for my upcoming Field Test Shooting Video for the KJWorks Full Metal 1911 CO2 Airsoft Pistol.

Build Quality: As expected, the KJWorks 1911 build quality is just like all the other KJWorks Airsoft guns I've tested so far, excellent the fit and finish is the best in my opinion even when compared to any of my 4.5mm steel BB shooters or 6 mm Airsoft pistols. When using KJWorks guns regularly, areas that are painted like the metal friction areas and high spots show very light wear which is rarely the case with metal built blowback Airguns. Again the tolerances between the moving parts like the slide and frame are extremely tight showing excellent workmanship and machining from KJWorks.

Realism: The KJWorks CO2 Full Metal 1911 Blowback Airsoft Pistol copies the real steel very popular even today Colt 1911 A1, it is really hard to tell the KJWorks Airsoft 1911 apart from the real 45 caliber version. The KJWorks 1911 can be field stripped very similarly to a real 1911 Semi Auto pistol and all parts function virtually the same including a working safety, grip safety, slide catch-release, magazine release and hammer.

Available in the:Replica Airguns Store

Pros:

  • Pretty much all metal pistol with good realistic weight to it.

  • Full cycle heavy blowback operation.

  • Excellent fit and finish as always with KJWorks pistols.

  • High capacity 28 round full size drop out magazine that holds the Airsoft BB’s and CO2. (Can get Green Gas mags)

  • Seems to be accurate and well centered on target.

  • Nice two tone finish.

  • Working grip safety.

  • Nice light true single action only trigger.

  • Field strip-able.

Cons:

  • Sights are non-adjustable but you can adjust elevation using the hop-up.

  • Field strips a little different than a real 1911.

  • CO2 magazine sticks out a bit but KJWorks makes Gas Mags also.

Comments:

I am a big fan of 1911 pistols and love getting my hands on pretty much any version weather it be a Real Steel 45 caliber 1911, a 4.5mm Steel BB version or 6mm Airsoft Pistol. As long as it has that true 1911 single action short light trigger to it. I love the way the slide cycles a bit slower than most semi auto pistols and this can be found in many Airgun and Airsoft version like this KJWorks 1911 making the shooting experience even more realistic. The fit, Finish and overall quality of the KJWorks 1911 over other brands is worth the slight additional costs so if you don't mind paying juts a tad bit more for that extra quality and you're looking for a CO2 1911 then you will not be disappointed with the KJWorks Full Metal CO2 Airsoft 1911.

My Vimeo Table Top  Review of the KJWorks M9and M9A1 Full Metal Blowback Airsoft Pistol:

Categories: 6mm, Airsoft, Blowback, CO2, Comparison, GBB, Gas, Pistol, Review, Semi Auto, YouTube Video Tags: Colt Government 1911, KJWorks, Model 1911

KJWorks CO2 Airsoft Full Metal 1911 - M9 - M9A1 Preview Video

1 Comment

We recently received some new pistols from KJWorks, The CO2 versions in Full Metal of the Colt 1911, the Berretta M9 and the Berretta M9A1. All of these guns are really well made, the fit and finish is excellent. Definitely a very high quality Airsoft pistol and worth spending a little bit more to get this extra quality. We have even lowered the price on many of our new KJWorks guns to make them even more affordable so check them out in our Canada Replica Airguns Store!

So I made a quick demo preview video where I get away from my table top and go outside to show them off a bit and shoot a few rounds through them at some clay pigeons. I did have some camera issues but you will get a good idea on how these guns look and perform.

KJWorks CO2 Airsoft Full Metal 1911

  • Full Metal Design.

  • 2.2 Pounds (980 grams).

  • Adjustable Hop-up.

  • 350-400 fps

  • 28 Round CO2 Magazine

  • Blowback SAO 

KJWorks CO2 Airsoft Full Metal M9

  • Full Metal Design.

  • 2.1 Pounds (950 grams).

  • Adjustable Hop-up.

  • 350-400 fps

  • 24 Round CO2 Magazine

  • Blowback SA & DA

KJWorks CO2 Airsoft Full Metal M9A1

  • Full Metal Design.

  • 2.1 Pounds (950 grams).

  • Adjustable Hop-up.

  • 350-400 fps

  • 24 Round CO2 Magazine

  • Blowback SA & DA

Categories: 6mm, Airsoft, Blowback, CO2, Comparison, Field Test, GBB, Gas, Pistol, Review, Semi Auto, YouTube Video Tags: KJWorks, M9, M9A1, Model 1911

ANT Advanced Novelty Tech CO2 HPA Conversion Kit Shooting Test

1 Comment

Here is my full Field Test Shooting Performance Video Review for the ANT (Advanced Novelty Tech) CO2 HPA Conversion Kit.

Make sure to watch my Table Top Preview for the ANT CO2 HPA Conversion Kit where I talk more about the features and benefits of a Bulk Air system like this and show you exactly what you get in the package.

My main goal in this Shooting Performance Test was to see how the ANT Advanced Novelty Tech CO2 HPAConversion Kit performed side by side with a standard 12 gram CO2. Keep in mind that you can also switch over at any time to a regular 12 gram CO2 even after installing the ANT adaptor system in the gun or magazine.

My choice of Airgun for this test was the KWC - Cybergun Mini UZIConverted to Full Auto. I chose this Blowback 4.5mm CO2 BB Gun because it uses a lot of CO2 with each shot and when shooting in full auto it literally eats CO2. I knew this airguns would really put the ANT Advanced Novelty Tech CO2 HPA Conversion Kit to the test.

My first performance test was to comparing both systems using a Chronograph so I could see how the fps velocity slowed down because of the CO2 cool down effect. The 12 gram CO2 did pretty well emptying a full 25 round magazine but keep in mind I was shooting in semi auto only for the sake of using a Chronograph. I did notice a drop in velocity from a high of over 300 fps to a low of around 260. When I switched over to the Bulk CO2 ANT System and performed the same test the fps started out a bit lower but stayed pretty much about the same with a few ups and downs. The initial lower fps may have been a result of using separate magazines for each test since the valves in each magazine are most likely tuned a bit differently to let out more or less CO2 with each shot.

My second and most impressive test was to empty a full 25 round magazine in full auto mode! Again a started out using the standard 12 gram CO2 and to make this a real world test, I did not replace the 12 gram CO2 form the previous test. I figured 50 shots was a realist amount of shots to get from a single 12 gram CO2 and after all I was only shooting in semi auto which uses a lot less CO2 then shooting in full auto.

My KWC Blowback Mini UZI rocked pretty good using the 12 gram CO2 until it hit about a third the way through the magazine and then it stated to slow down and pretty much stop dead in its tracks with about 5-6 rounds still left in the magazine. The CO2 was all gone and I was left a bit unsatisfied :(

Without any significant break time to let my KWC Mini UZI warm up again, I switched over to the ANT Advanced Novelty Tech CO2 HPA Conversion Kit magazine and unloaded the full magazine in no time with no cycle rate slow down at all, even after the magazine was deprived of Steel BB's I kept squeezing the trigger and letting the blowback hammer my shoulder for several more satisfying bursts. Now that is what you expect from a full auto Blowback BB Machine gun!

In conclusion, when shooting in semi auto you will see better fps consistency using the ANT Advanced Novelty Tech CO2 HPA Conversion Kit but where this system really shines at least for me is I can shoot as fast as as long as I want and it will feel same as the very first shoot I take even when using a full auto system. No more switching out 12 gram CO2 every few magazines, just speed load some more BB's in and your good to go.

Categories: .22 cal, 4.5mm / .177 cal, 6mm, Airsoft, BB, Blowback, Bulk Air, CO2, Field Test, Full Auto, GBB, Gas, Pellet, Pistol, Review, Rifle, Semi Auto, YouTube Video Tags: ANT, Advanced Novelty Tech

ANT Advanced Novelty Tech CO2 HPA Conversion Kit Preview

2 Comments

I was sent a really cool new product form a company called ANT (Advanced Novelty Tech). Their CO2/HPA Converter allows you to hook up either a large CO2 tank or High Pressure Air system using standard Paintball hose system.

What's kind of neat with the Advanced Novelty Tech CO2 HPA Conversion Kit, is that you can still interchange your 12 gram CO2 if you want to even after modifying your gun to use Bulk CO2 or HPA!

The ANT Advanced Novelty Tech CO2 HPA Conversion Kit works with well over 100 BB, Pellet and Airsoft guns most of which would be Pistols but some rifles are included in this list.

The main advantages over using standard 12 gram CO2 cartridges would be a significant lower cost for CO2, along with less fps velocity fall off, so better performance overall.

The Advanced Novelty Tech CO2 HPA Conversion Kit  is fairly easy to install and ANT even has some inctructional videos showing you how to do this.

Stay posted as I will be making a field test performance test using the ANT Advanced Novelty Tech CO2 HPA Conversion Kit with my KWC Mini UZI Full Auto BB Machine gun :)

Categories: .22 cal, 4.5mm / .177 cal, 6mm, Airsoft, BB, Bulk Air, CO2, Full Auto, GBB, Gas, Pellet, Pistol, Review, Semi Auto, YouTube Video Tags: ANT, Advanced Novelty Tech

ASG Product Update Preview Video March 2015

1 Comment

In this preview Update Vimeo Video I take a quick look at the following ASG Airsoft and BB Guns...

ASG Marsushin Deringer Chrome Gas Airsoft Pistol:

  • Ammo Capacity: 2

  • Green Gas

  • Weight: 215 gram (.5 pounds)

  • Power: 77 m/s (252 fps)

  • Plastic Frame / Metal Grips

ASG MK2 Dual Tone CO2 Airsoft Pistol:

  • Ammo Capacity: 15

  • 12 Gram CO2

  • Weight: 790 gram (1.8 pounds)

  • Power: 127 m/s (417 fps)

  • Metal and Plastic

ASG CZ 75 CO2 Blowback BB Pistol:

  • Ammo Capacity: 17

  • 12 Gram CO2

  • Weight: 950 gram (2.1 pounds)

  • Power: 95 m/s (312 fps)

  • Mostly Metal

ASG US Marine MEU Limited 1911 Gas Blowback Pistol:

  • Ammo Capacity: 15

  • Gas Blowback

  • Weight: 1020 gram (2.3 pounds)

  • Power: 86 m/s (283 fps)

  • Mostly Metal

ASG CZ Scorpion VZ61 AEG Airsoft Machine Pistol:

  • Ammo Capacity: 58

  • Electric AEG

  • Weight: 1220 gram (2.7 pounds)

  • Power: 81 m/s (266 fps)

  • Metal and Plastic

 

 

 

ASG BT5 PDW AEG Aisoft Rifle:

  • Ammo Capacity: 100

  • Electric AEG

  • Weight: 2400 gram (5.3 pounds)

  • Power: 95 m/s (310 fps)

  • Metal and Plastic

ASG Franchi SAS 12 Pump Action Airsoft Shotgun:

  • Ammo Capacity: 30 (3 Shot Burst)

  • Spring Pump

  • Weight: 1200 gram (2.7 pounds)

  • Power: 85 m/s (279 fps)

  • Metal and Plastic

 
Categories: 4.5mm / .177 cal, 6mm, AEG, Airsoft, BB, Blowback, CO2, Full Auto, GBB, Gas, Pistol, Review, Semi Auto, YouTube Video Tags: ASG, BT5 PDW, CZ 75, Derringer, Franchi SAS 12, Ruger MK2, Scorpion VZ61, Socomgear 1911

Best BB Guns

1 Comment

First off let’s get one thing straight! What I’m looking for in a BB gun is more than likely going to be way different than what someone else is looking for in what they think is the “Best BB Gun” available.

Many people will determine the Best BB Gun as the BB gun that has the highest price tag, usually you get better quality the higher the price goes up but not always, there are times when perhaps you are paying for a name brand or cosmetic add ons that don’t always make the gun better or the best.

On the other hand, some people will determine the best BB gun as the one that is the least cost since they may not have a lot of money to spend, and an expensive BB gun is a BB gun that that person would not be able to afford or even own, far from an ideal or the Best BB Gun for them.

Many people only look at the specifications to determine if that particular BB gun is the outright best BB Gun. One specification that people seem to fixate on is how powerful is the BB gun in question? If it has the highest FPS then surely it must be the best BB Gun! That Pop can never saw it coming! What about cost of operation, so things like reliability and how many shots per CO2 you can get out of a BB gun. All important features to consider when picking out the Best BB Gun!

Style is another important part of what makes a BB Gun the Best option for you, are you wanting a classic BB Pistol? Perhaps a Modern BB Gun, Maybe even a BB gun that you can not get in your area because of gun laws? Style is a very individual preference and what looks good to me may look terrible to someone else.

One aspect that is very important to me, is realism, does the BB Gun operate the same and does it have similar metal and plastic parts as the real steel version? Does the BB gun I am considering have blowback operation and a true single or double action trigger like it’s big brother? What about a full size drop out magazine and the ability to field strip the BB Gun?

Some people want their BB gun for simple backyard good old fun shooting and so as long as it shoots pretty straight and works as it’s supposed to, then that is all they care about. Many real steel shooters want a BB Gun to operate exactly like their real steel version, so they can practice with it to get in more trigger time when going to a gun range is not an option.

Of course there are aspects like Reliability, Performance, Fit and Finish, Licensing and Build Quality that all determine what makes the Best BB Gun and again it really depends which of these qualities are most important to you that will determine which BB Gun is the best BB Gun.

So how do you determine which is the Best BB Gun? Make a list of what you are looking for in a BB Gun. Attributes like Cost, Performance, Build Quality, Style, Realism, Availability…

Once you have narrowed down your Best BB Gun list, get as much information on each BB Gun you are considering, to narrow the list down even more. There are tons of Youtube videos you can watch for your Best BB Gun final short list to help you determine your ultimate choice.

So please don’t ask me what the Best BB Gun is? I can not even tell you which one I like the best since my wish list changes from day to day…

Categories: 4.5mm / .177 cal, 6mm, Airsoft, BB, Blowback, CO2, Comparison, Full Auto, GBB, Gas, Pellet, Pistol, Q&A Video, Repeater, Revolver, Semi Auto, YouTube Video Tags:

KWC P-08 Luger CO2 Blowback BB and Airsoft Pistol Field Test Shooting Review

3 Comments

Make sure to also checkout my full Table Top Review where you will find more details and specifications for the KWC Luger P-08 Airsoft replica pistol which is virtually the same gun as the 4.5mm BB version with the only real difference being the ammo type and the amount of rounds per magazine (21 rounds for the 4.5mm BB version and 15 rounds for the 6mm Airsoft version).

I have also already made a full Field Test Shooting Review for the Airsoft version of this CO2 Blowback Pistol where I got very similar results using slightly heavier .25 gram Airsoft BB's so again, make sure to checkout that YouTube Video Filed Test Review.

Basically in this YouTube video, I shoot the 4.5mm Steel BB version of the KWC P-08 Luger head to head against the Airsoft Version to see how they compare in terms of Feet Per Second speed and Accuracy from30 feet away from a paper target using a semi rested shooting stance. As expected the heavier 4.5mm Steel BB's shot a bit slower but did seem to have a slight advantage in the accuracy department.

Watch my YouTube Field Test Head to Head Shooting video of the KWC Luger P-08 CO2 Blowback Replica Pistols to see how they both compared:

Buy the KWC Luger P-08 in the Canada Store

Categories: 4.5mm / .177 cal, 6mm, Airsoft, BB, Blowback, CO2, Field Test, GBB, Pistol, Review, Semi Auto, YouTube Video Tags: KWC, Luger P08

Blowback Airguns Versus Non-blowback Airguns 2

1 Comment

This topic of Blowback Airguns Versus Non-blowback Airguns comes up often so I thought I would address it a second time around since I get a lot of new visitors and subscribers daily who may not have watched my first video explanation on this topic. You can also checkout my first video on this subject since there may be some stuff I missed out in this video second video ;)

There are really two types of people asking or commenting on Blowback Airguns Versus Non-blowback Airguns. The first type of person who genuinely wants to know which is best and for what reasons. Then there is the other kind of person who makes a narrow minded statement that one type is clearly better than the other type, based on their own preferences and interests but not considering that there are other people out there with different opinions and preferences than them. You know who you are and we all know you are not going to change cause that would require an open mind...

Here is a list of the Pros and Cons I go over for each style of Airgun:

Pros:

  • Blowback guns simulate recoil.

  • Blowback guns can have better and more true triggers compared to their real steel counterparts.

  • Blowback guns can be better suited for action shooting.

  • Blowback guns are better as prop guns.

  • Blowback guns are generally more realistic in terms of mechanics.

  • Non-blowback guns generally use less CO2 per shot.

  • Non-blowback guns generally have higher fps.

  • Non-blowback guns can be more accurate.

  • Non-blowback guns can be more reliable.

  • Non-blowback guns can be less expensive.

Cons:

  • Blowback guns generally get less shots per CO2.

  • Blowback guns generally have lower fps.

  • Blowback guns can be less accurate.

  • Blowback guns can be less reliable.

  • Blowback guns can be more costly. 

  • Non-blowback guns do not simulate recoil.

  • Non-blowback guns do not have true single action only triggers.

  • Non-blowback guns generally have heavier triggers that slow down shooting performance.

  • Non-blowback guns are generally not as good for prop use and or training.

  • Non-blowback guns generally are not as realistic compared to their real steel counterparts. 

Watch my Vimeo video where I go into detail on Blowback Airguns Versus Non-blowback Airguns again ;)

Categories: Airsoft, BB, Blowback, CO2, Comparison, Full Auto, GBB, Gas, Pellet, Pistol, Rifle, Semi Auto, YouTube Video Tags:

Do Airguns and Blank Guns Have Recoil?

No Comments

In this Vimeo video, I go over a common question I get pertaining to the recoil effect of Airguns and Blank Guns. Many people want to know if Airguns and Blank Guns have similar recoil effects to a Real Guns and if so, how much recoil will you feel from an Airgun or Blank Gun?

The short answer is yes, there is some recoil with both Airguns and Blank Guns since whenever there is a force in one direction there will be a somewhat similar force in the opposite direction creating what we feel as recoil. With Airguns since the force from the CO2 or compressed air is rather small in comparison to that of the gun powder blast from a Real Guns or even a Blank Gun, the recoil is very slight. Blank Guns have similar gun powder charges to a Real Gun and so the recoil is more noticeable but unlike a Real Gun, a Blank Gun does not really push against a sizable object like a bullet, a Blank Gun only pushes against the air in front of the barrel which has very limited resistance and so there will be much less felt recoil from a Blank Gun than the recoil from a Real Gun pushing on a heavy grain bullet.

With semi auto Guns like Blowback Pellet and BB Guns and semi auto Blank Guns, there is also the momentum and mass of the slide to consider as it moves backwards and forwards which also gives the effect of recoil and in the case of an Airgun accounts for most of the recoil felt by the shooter.

Watch my Vimeo video on this subject where I go into much more detail and explain the effect of recoil when shooting Airguns and Blank Guns:

Categories: Airsoft, BB, Blank Gun, Blowback, CO2, Comparison, GBB, Gas, Pellet, Pistol, Semi Auto, YouTube Video Tags:

Blowback Versus Non-Blowback Airgun Comparison

1 Comment

In this Comparison video I go through the benefits and shortcomings of both Blowback and Non-Blowback Airguns. I focus mainly on Airguns but there is a definite crossover with Airsoft guns.

Here are some basic statements that best describe both Blowback and Non-Blowback Airguns.

Blowback Airguns:

  • Blowback Airguns usually have a movable slide that moves back and forth with each shot.

  • Sometimes the blowback operation is internal (Internal bolt) so there may not be an external moveable slide.

  • Some CO2 is used to move the slide rearwards in a Blowback Airgun.

  • The Blowback motion of the slide with some blowback airguns can also cock the hammer or internal striker allowing for true single action trigger pull. But not always!

  • Some Blowback airguns have the potential for full auto capabilities since they can have a true semi auto action.

  • There is some noticeable recoil from the Blowback action simulating the recoil of a real gun.

Non-Blowback Airguns:

  • Non-Blowback Airguns can have fixed or movable slides but they will not cycle back and forth with each shot.

  • Non-Blowback Airguns tend to have less working parts since no Blowback valves are required or even a moveable slide.

  • There are some Blowback and Non-Blowback Airguns that field strip similarly to their real steel counterparts but this is most commonly found in Blowback Airguns.

  • Non-Blowback Airguns require the shooter to cock the hammer for single action shooting or use a double action trigger pull for semi auto like performance.

Pros:

Blowback Airguns:

  • Blowback Action causes a noticeable recoil which makes the airgun feel more realistic.

  • Blowback Airguns in some cases have true semi auto action with true single action triggers which mimic the authenticity of the real steel versions of the guns they replicate much better making them better training tools.

  • Having some recoil makes blowback Airguns potentially better training tools.

  • Blowback Airguns look really cool when shooting them  and are great action prop guns.

Non-Blowback Airguns:

  • Non-Blowback Airguns tend to have less working parts so less to go wrong and more reliability.

  • Non-Blowback Airguns can be more accurate since the recoil from the blowback is not a factor.

  • Non-Blowback Airguns have more potential power and more shots per CO2 since no CO2 is robbed for the blowback operation.

Cons:

Blowback Airguns:

  • Blowback operation can rob some of the power and will also rob how many shots you get from the Airgun.

  • Blowback Airguns are effected even more by cold weather and the cool down effect.

  • The recoil from Blowback Airguns can effect accuracy for some shooters.

Non-Blowback Airguns:

  • Non-Blowback airguns are generally double action when shooting semi auto and so the trigger pull will be longer and heavier.

  • Non-Blowback Airguns do not replicate the recoil action of a real gun.

  • Non-Blowback Airguns do not look as cool to shoot and are not as good of an action prop gun.

Categories: .22 cal, 4.5mm / .177 cal, 6mm, Airsoft, BB, Blowback, CO2, Comparison, GBB, Pellet, Pistol, Revolver, Semi Auto, YouTube Video Tags:

G&G CM16 Carbine Light Version 2 GBB AR Airsoft Rifle Table Top Review

5 Comments

Type: Airsoft AR M16 Styled Rifle.

Manufacturer:G&G.

Model:CM16 Carbine GBB.

Materials: Metal and plastic/fiber construction.

Weight: 5 pounds.

Barrel: 10 inches, metal non-rifled.

Propulsion: GBB

Action: Semi & full auto blowback.

Ammunition Type: 6mm plastic Airsoft BB's.

Ammunition Capacity: 30+ round magazine.

FPS: 370+.

I could pretty much copy and paste my review of my G&G CM16 Raider GBB since both of these guns are pretty much the same Airsoft Rifle with different finishings. Instead I will place a link to my G&G CM16 RaiderVersion 2 GBB AR Airsoft Rifle Review and insert some nice photos of the  G&G CM16 Carbine version for you to admire :)

Categories: 6mm, Airsoft, Blowback, Comparison, Full Auto, GBB, Review, Rifle, Semi Auto, YouTube Video Tags: CM16 Carbine GBB, G&G

SHOT Show Vegas 2014 Miscellaneous

5 Comments

I stopped by the ICS Booth, we don't sell too much of their products but have carried a few items from time to time. ICS caries some nice quality Airsoft guns including the M1 Grand with real wood stock, and some AK & AR variants.

One of our suppliers had the new FN Herstal Five-seveN Blowback Airsoft pistol, I believe made by Marushin. Like the real FN Herstal Five-seveN, the pistol is pretty much all polymer including the slide and frame. This pistol also uses CO2 in the full size drop out magazine which should make it fairly powerful.

Looks like there is another Dan Wesson contender available now in the form of a Swiss Arms S&W 357 Magnum 4 inch and 6 inch barreled version, they look really nice and like the Dan Wesson have the realistic reusable brass shells that hold the 4.5mm Steel BB's.

Ever considered owning a  mobile Gunsmith vehicle, look no further, I came across this pimped out Firearms Van complete with machine guns mounted in the front :) Inside was a complete firearms workshop.

Last but not least, we had some fun while in Vegas. I go down for the SHOT Show for business but I also bring my wife and we make time for some non business related activities. I generally stay at the WorldMark resort each time and this year the weather was pretty nice so we where able to get some sun by the pool a couple of days and I even got a tan line! Of course the food and entertainment is always awesome in Vegas.

Categories: 4.5mm / .177 cal, 6mm, AEG, Airgun News, Airsoft, Airsoft News, BB, Blowback, CO2, Full Auto, GBB, Pellet, Pistol, Rifle, Semi Auto Tags: 357, FN Herstal Five-seveN, ICS, Marushin, SHOT Show, Swiss Arms

SHOT Show Vegas 2014 G&G Booth

3 Comments

We carry a lot of the G&G line and perhaps have as much in stock as you would find at the G& G booth ;) I did see a few items we do not have in stock so I will have to see what I can do about that. Some products that I hope to see added to our Canada Replica Airguns Store would for sure be the M1 Grand and our Canadian Military Colt C7A1/2.

Categories: 6mm, AEG, Airsoft, Airsoft News, Blowback, CO2, Full Auto, GBB, Pistol, Revolver, Rifle, Semi Auto Tags: Colt C7A1, G&G, M1 Grand, SHOT Show

SHOT Show Vegas 2014 Inokatsu Airsoft

6 Comments

One company I took notice of was Inokatsu, they make super high quality Airsoft guns. I was drawn to their Sig Sauer P229 and 1911 pistols that by the way are made out of real steel and as close to the real version as possible without it being a real gun. The Inokatsu pistols I looked at are not cheap and will set you back over a grand but are as close as you can get to a real sidearm as possible in an Airsoft version. They feel amazing to shoot with heavy blowback and that sound real steel makes when the slide snaps back.

Let me know if you're like me and would be willing to part with a substantial amount of money for one of these treasures? 

Categories: 6mm, Airsoft, Airsoft News, Blowback, CO2, GBB, Pistol, Semi Auto Tags: Inokatsu, Model 1911, SHOT Show, Sig Sauer P229.

My Airgun, Airsoft Gun and Blank Gun Collection Favorites for 2013

6 Comments

So it's 2014 but I still needed to make my 2013 Airgun, Airsoft Gun and Blank Gun Collection Favorites for 2013. It's become a tradition I guess you could say. No I do not show all the guns in my collection but I do cover most of my favorites and also some new guns I picked up in 2013.

Here's a peek but make sure to watch the YouTube video bellow where I go over all my top picks for 2013. You can also buy many of the guns I show in this YouTube video over in our Canada and US Replica Airguns Store!

2013 BB Pistols

2013 Pellet Pistols

2013 Airsoft Pistols

2013 Blank Pistols

2013 Rifles

Categories: .20 cal, .22 cal, .43 cal, 4.5mm / .177 cal, 6mm, 8mm, 9mm, Airsoft, BB, Blank Gun, Blowback, Bulk Air, CO2, Full Auto, GBB, Multi-pump, Paintball, Pellet, Pistol, Review, Revolver, Rifle, Semi Auto, Single Shot, Spring Piston, YouTube Video Tags:

KSC M11A1 GBB Airsoft Machine Pistol Table Top Review

No Comments

Type: GBB Airsoft Machine Pistol (Used).

Manufacturer: KSC

Model: Cobra M11A1

Materials: Plastic and metal.

Weight: 2.9 pounds (1315 grams).

Barrel: Metal non-rifled.

Propulsion: GBB.

Action: Single action only.

Ammunition Type: 6mm plastic Airsoft BB's.

Ammunition Capacity: 40 rounds.

FPS: 300+ fps.

Trigger Pull: The trigger pull on the KSC M11A1 GBB Airsoft Machine Pistol is pretty much exactly what you would expect from this fast firing single action only semi and full auto machine pistol, it has a really short take-up and then a nice crisp light trigger pull. Since it is an open bolt system, you will need to pull back the bolt for the first shot, releasing the trigger releases the bolt, just like with a real M11A1.

Accuracy: At this point because I received this gun from another collector in used condition, it is not working 100%, the hop-up bucking was damaged and the new ones I ordered are not the correct versions for this Airsoft gun. It does shoot but it is temperamental, sometimes the bolt will not cycle all the way and I have no idea how this is effecting the fps and accuracy. It would not be fair to test it in this condition, hopefully I can find the right hop-up bucking for it and do the Field Test Shooting Review at some point.

Build Quality: MyKSC M11A1 GBB Airsoft Machine Pistol has been used a fair bit so it is somewhat battle scarred, still it looks pretty good and other than the Hop-up bucking problem I am having it should be in working condition, unfortunately without the correct hop-up bucking, this gun will not work properly. Hopefully I can find a hop-up bucking? Even though much of this machine pistol is plastic externally, it has held up very well, the metal parts do also help to balance it off and give it a decent overall 3 pound weight which feels good considering it is such a small gun. 

Realism: The KSC M11A1 GBB Airsoft Machine Pistol is a very close copy of the real steel Cobra M11A1 Machine Pistol, all the parts appear to function just like the original Cobra RPB Industries M11A1 and it even field strips in the same manor. The full licensing and trademarks also help to make this replica very believable.

Reviewed by:ReplicaAirguns.com

Pros:

  • Very realistic and accurate replica with full Cobra RPB Industries licensing.

  • Even though there is lots of external polymer, it still has good weight to it.

  • Full metal 40 round drop out magazine, holds BB's and Gas.

  • Everything works like the original, field strips and lots of mechanical parts. 

  • Shoots in both semi and full auto.

Cons:

  • Hard to get here in Canada and hard to get parts here in Canada.

  • Mostly plastic main build - Limited usage of metal and steel.

  • Have no idea how it will perform because it is not functioning at 100%.

Comments:

Well I've pretty much said everything I can say without actually shooting it? Even though my used KSC M11A1 GBB Airsoft Machine Pistol is not in 100% working condition, I still like having it as I like the replica aspects of owning it, how else would I get my hands on a .380 caliber full auto machine pistol here in Canada ;) And you never know, I may just luck out and find the proper hop-up bucking for it and then have the chance to do my Field Test Shooting Review for you all :)

My Vimeo Table Top  Review of the KSC M11A1 GBB Airsoft Machine Pistol:

Categories: 6mm, Airsoft, Blowback, Full Auto, GBB, Pistol, Review, Semi Auto, YouTube Video Tags: KSC, M11