We carry a lot of the G&G line and perhaps have as much in stock as you would find at the G& G booth ;) I did see a few items we do not have in stock so I will have to see what I can do about that. Some products that I hope to see added to our Canada Replica Airguns Store would for sure be the M1 Grand and our Canadian Military Colt C7A1/2.
I also visited my friends at the ASG booth but for some reason I did not get a photo of their booth? I do have some video walk through stuff I will show you in my YouTube Video coverage of this years Vegas SHOT Show. Most importantly I have lots of gun photos so let's take a look at them...
One of my favorite ASG pistols is the Bersa BP9CC, I have already reviewed it and I just really like how this gun looks and holds, ASG took it one step further this year by adding a two-tone silver version and I have to say it looks awesome in person, my photos do not do it justice at all :(
A new handgun to the ASG blowback pistol series is the CZ P-09 Duty Pellet pistol. Basically it shares similar mechanics to the Umarex PX4 and Gamo PT-85 using the double sided rotary pellet magazine with 8 shots located on each end of the stick magazine. The ASG CZ P-09 Duty features a metal slide, working hammer and safety.
Another pellets pistol that should be very familiar to most of you is the new .177 caliber pellet shooting Dan Wesson in 6 inch silver and 8 inch black versions. ASG added a rifled barrel and redesigned solid brass shells that hold pellets instead of 4.5mm Steel BB's. Expect to take a little bit longer to reload the pellets as unscrewing the tip of each shell is required to place a .177 caliber pellet in each bullet tip.
Of course ASG has tons of licensed pistols to choose from, many on both 4.5mm Steel BB and 6mm Plastic Airsoft!
One new rifle that stood out to me was the ASG CZ Scorpion EVO 3 A1 AEG Airsoft Rifle, the Scorpion features an intelligent AEG system that detects when there may be a potential feeding problem and also when the magazine is out of ammo.
I get many question over on my Vimeo Channel, lots of times people asking me which gun is better and in most cases it really comes down to personal preference. But in some situations the comparisons are really close and to be honest it's even hard for me to decide which gun I think is better.
I get asked which one has higher fps, or is more accurate, or has harder blowback recoil... the list goes on. Without actually taking both gun outside and doing a head to head test using the same exact situations, I really can not honestly tell you! So that's exactly what I am going to do. Take some of the most commonly asked about gun comparisons and have a showdown.
Over the next while I will be making a total of five separate videos where I compare the following CO2 BB pistols head to head:
The Tanfoglio Gold Custom versus the Sig Sauer P226 X-Five Sight Rail Version
The KWC Model M1911 Tac A1 versus the Cybergun/KWC GSG 92/M92
The ASG Dan Wesson 8 inch Revolver versus the Umarex Smith & Wesson 327 TRR8
The ASG CZ 75 P-07 Duty versus the ASG Bersa BP9CC versus the ASG STI Duty One 1911
The Gamo PT-85 versus the Umarex Beretta PX4 Storm
Make sure to come back and check out these upcoming head to head field test shooting videos!
So it's 2014 but I still needed to make my 2013 Airgun, Airsoft Gun and Blank Gun Collection Favorites for 2013. It's become a tradition I guess you could say. No I do not show all the guns in my collection but I do cover most of my favorites and also some new guns I picked up in 2013.
Here's a peek but make sure to watch the YouTube video bellow where I go over all my top picks for 2013. You can also buy many of the guns I show in this YouTube video over in our Canada and US Replica Airguns Store!
2013 BB Pistols
2013 Pellet Pistols
2013 Airsoft Pistols
2013 Blank Pistols
2013 Rifles
Type: GBB Airsoft Machine Pistol (Used).
Manufacturer: KSC
Model: Cobra M11A1
Materials: Plastic and metal.
Weight: 2.9 pounds (1315 grams).
Barrel: Metal non-rifled.
Propulsion: GBB.
Action: Single action only.
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 40 rounds.
FPS: 300+ fps.
Trigger Pull: The trigger pull on the KSC M11A1 GBB Airsoft Machine Pistol is pretty much exactly what you would expect from this fast firing single action only semi and full auto machine pistol, it has a really short take-up and then a nice crisp light trigger pull. Since it is an open bolt system, you will need to pull back the bolt for the first shot, releasing the trigger releases the bolt, just like with a real M11A1.
Accuracy: At this point because I received this gun from another collector in used condition, it is not working 100%, the hop-up bucking was damaged and the new ones I ordered are not the correct versions for this Airsoft gun. It does shoot but it is temperamental, sometimes the bolt will not cycle all the way and I have no idea how this is effecting the fps and accuracy. It would not be fair to test it in this condition, hopefully I can find the right hop-up bucking for it and do the Field Test Shooting Review at some point.
Build Quality: MyKSC M11A1 GBB Airsoft Machine Pistol has been used a fair bit so it is somewhat battle scarred, still it looks pretty good and other than the Hop-up bucking problem I am having it should be in working condition, unfortunately without the correct hop-up bucking, this gun will not work properly. Hopefully I can find a hop-up bucking? Even though much of this machine pistol is plastic externally, it has held up very well, the metal parts do also help to balance it off and give it a decent overall 3 pound weight which feels good considering it is such a small gun.
Realism: The KSC M11A1 GBB Airsoft Machine Pistol is a very close copy of the real steel Cobra M11A1 Machine Pistol, all the parts appear to function just like the original Cobra RPB Industries M11A1 and it even field strips in the same manor. The full licensing and trademarks also help to make this replica very believable.
Reviewed by:ReplicaAirguns.com
Pros:
Very realistic and accurate replica with full Cobra RPB Industries licensing.
Even though there is lots of external polymer, it still has good weight to it.
Full metal 40 round drop out magazine, holds BB's and Gas.
Everything works like the original, field strips and lots of mechanical parts.
Shoots in both semi and full auto.
Cons:
Hard to get here in Canada and hard to get parts here in Canada.
Mostly plastic main build - Limited usage of metal and steel.
Have no idea how it will perform because it is not functioning at 100%.
Comments:
Well I've pretty much said everything I can say without actually shooting it? Even though my used KSC M11A1 GBB Airsoft Machine Pistol is not in 100% working condition, I still like having it as I like the replica aspects of owning it, how else would I get my hands on a .380 caliber full auto machine pistol here in Canada ;) And you never know, I may just luck out and find the proper hop-up bucking for it and then have the chance to do my Field Test Shooting Review for you all :)
My Vimeo Table Top Review of the KSC M11A1 GBB Airsoft Machine Pistol:
Type: Pellet Pistol (Used).
Manufacturer: Daisy
Model:Power Line 2003
Materials: Mostly plastic.
Weight: 1.6 pounds (726 grams).
Barrel: Metal rifled.
Propulsion: 12 gram CO2.
Action: Single action only.
Ammunition Type: .177 caliber lead pellets.
Ammunition Capacity: 35 rounds.
FPS: 400+ fps.
Trigger Pull: The trigger pull on the Daisy Power Line 2003 Blowback Pellet Pistol even though it is single action only, is a bit heavier than you may expect, it is more of a medium pull with a very short take up and then somewhat unexpected release due to the medium to heavy pull. Quick shot succession should be achievable though due to the short trigger pull length.
Accuracy: Well we will have to find out in my followup Field Test Shooting Video Review? And I really hope that this pistol is in working order so I am able to bring that review to you shortly. I am expecting it to produce around 400 fps and some decent accuracy with its rifled barrel.
Build Quality: The Daisy Power Line 2003 Blowback Pellet Pistol is made in the US and is primarily a plastic built air pellet pistol, it does have some metal internal parts along with the screws, barrel, cross-bolt safety and CO2 Tab. Fit and finish seem to be fairly decent, in terms of reliability I have no idea but my hopes are high. I have heard that this pistol can jam if not using pellets that are agreeable with it.
Realism: The Daisy Power Line 2003 Blowback Pellet Pistol is not really a replica so to speak, it does kind of resemble a bloated version of a Browning High Power but is much larger and out of proportion when comparing the two of them. The actual mechanical aspects of this gun are not like any other gun I have every come across, specifically when it comes to the 35 shot rotary magazine as the pellets spiral internally from front to back. The single action blowback mechanism is also very unique to an airgun pellet pistol, it has been said that this pistol can be converted to full auto but I have no intensions of doing so.
Reviewed by: ReplicaAirguns.com
Pros:
If you have a Power Line 2003 then you have a really rare gun from Daisy.
True single action Blowback operation.
One of the only Pellet Pistols that can be converted to full auto.
High capacity 35 round pellet magazine.
Made in the US.
Cons:
No longer in production.
Kind of large for a pistol, not true to scale.
Mostly plastic build materials
None adjustable sights.
Comments:
I have had an interest in the Daisy Power Line 2003 for some time but did not know how or if I would ever get my hands on one and lucky for me it finally happened :) The main interest here is simply that it is the only pellet pistol I know of that has a true single action blowback operation and to top things off it has a 35 round magazine! Sure there is the implication that it can be converted to full auto but for me I really want to keep this pistol in factory condition, I have other guns that shooting in full auto if I feel the urge to go Rambo on anything ;) Definitely stay posted for my Field Test Shooting Review for this rare Daisy pellet pistol.
My Vimeo Table Top Review of the Daisy Power Line 2003 Blowback Pellet Pistol:
Type: Airsoft AR M16 Styled Rifle.
Manufacturer:G&G.
Model:CM16 Raider GBB
Materials: Metal and plastic/fiber construction.
Weight: 5 pounds.
Barrel: 10 inches, metal non-rifled.
Propulsion: GBB
Action: Semi & full auto blowback.
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 30+ round magazine.
FPS: 370+.
Trigger Pull: The trigger pull on the G&G AR styled Airsoft CM16 Raider is very smooth, the CM16 Raider uses a mechanical trigger that once the charging handle has been pulled back or "charged", works in a single action only manor with a slight bit of take-up and then a light predictable release. Each time the closed bolt gas blowback system shoots a round in semi or full auto, the internal action is ready for the next single action shot.
Accuracy: So far I have not tested Version 2 of the G&G CM16 Raider, but I have tested Version 1 so here are the result I got with Version 1 until I do my official Field Shooting Test with Version 2. When shooting from a 30 foot distance I did get some nice closely grouped shots from the G&G CM16 Raider Gas Blowback but when shooting in full auto it did spread apart somewhat, maybe from the GBB recoil? Version1 of the G&G CM16 Raider GBB shot an average of just over the 325 fps, I was using .25 gram BB's and it was a cool day so you can expect higher fps out of the G&G CM16 Raider when conditions are better.
Build Quality: The G&G CM16 Raider GBB being built on G&G Combat Machine Platform is targeted more for the price conscience person. The quality is consistent and good and I did not mind having more plastic in the G&G CM16 Raider GBB as my plan from the beginning was to add a lot of extra accessories and starting out with a somewhat lighter footprint made the gun still relatively usable even when all geared up with extra accessories. I also feel the plastic or polymer fiber upper and lower receiver and RIS rail system will also wear better than steel as it is more likely to flex rather than break in many situations, not to mention metal will show scratches and wear more over time.
Realism: Airsoft AR rifles in my opinion are very realistic in general, even the AEG versions work just like the real steel AR's with working charging handles, dust covers, bolts, magazine, adjustable stocks and sights, but I would have to give the advantage to the gas Blowback systems like the G&G CM16 Raider GBB as it has a full internal bolt with some decent recoil, it can also be field striped very similarly to a real AR15 rifle. The shot count is more like what you would find in an M16 or AR rifle which means you will need to consider ammo shot assuage and reloading more carefully when using it in an Airsoft game.
Purchased From: The Replica Airguns Store.
Pros:
Super affordable Gas Blowback Airsoft AR M16 styled Rifle.
Very high rate of fire in full auto.
Polymer shell is both light and very durable, does not show scratches or wear as easily as metal.
All most every part is operational - Fully Ambidextrous now.
Can be fully customized, lots of mounting points on the RIS Rail system.
Fully adjustable Crane Stock.
Removable rear Iron Sight can be swapped out for other sighting systems and hardware.
Version 2 is a significant upgrade from Version 1.
Internals can be swapped over to make it an AEG gun.
Cons:
Some people may not like the polymer RIS rails and upper and lower receiver?
Would have liked to have seen some sort of a plate over the pistol grip to finish it off.
Comments:
I already really liked Version 1 of the G&G CM16 Raider GBB Airsoft AR Rifle and even bought a bunch of magazines and gear to sport mine up for use in some local Airsoft games, the upgrades and improvements found in Version 2 are the icing on the cake! I am hoping the internal performance enhancements will increase the FPS just a bit and Gas efficiency somewhat over Version 2 but will find out when I give it a thorough testing shortly. If you have been a bit scared off by the higher prices of some GBB Gas Blowback Airsoft rifles then perhaps take a look at the G&G Combat Machine Platform CM16 Raider in GBB, it may just change your mind about Gas Blowback Airsoft rifles!
My Vimeo Video Review for the G&G CM16 Raider Airsoft GBB AR Styled Airsoft Rifles:
Every so often I come across some interesting guns that people are willing to trade or sell me, if the price is right or the trade involves a gun I can part with, then I go for it and hopefully end up with something I may not be able to get new or that for me is hard to acquire in Canada.
My most recent trade added two new guns to the collection, a KSC M11A1 Airsoft Machine Pistol and a Daisy Power Line 2003 .177 Caliber Pellet Pistol.
Both of these guns are very hard to get since the KWC Airsoft M11A1 shoots a bit too week for import into Canada, and the Daisy 2003 is no longer in production.
The KSC M11A1 is a 6mm Airsoft pistol that shoots in both semi and full auto using a Gas Blowback open bolt system, it is a replica of the .380 Caliber Cobra RPB Industries M11-A1. Mine came with a mock suppressor and 7 magazines, although not all of them are in working condition. The KSC M11A1 is in working condition but needs a new Hop-up Rubber Bucking which I have on order.
The Daisy Power Line 2003 seems to be in really good condition but still needs to be tested, it is one of the only true blowback semi auto pellet pistols I know of, what I mean by this, is it has a true blowback system with a true single action trigger which means it can be converted to full auto which is one of the reason Daisy may have discontinued it. The Daisy Power Line 2003 uses a very interesting 35 round rotational magazine. Some say it is loosely styled after a Browning High Power pistol.
Stay posted for reviews on both of these pistols down the road.
You may wonder why I am doing another video on the G&G CM16 Raider Gas Blowback Airsoft AR Rifle? That's because the one I have here in this Update Video is Version 2 and yes there is a difference. So far I can only tell you about the obvious stuff since I really have not tested it out to see if there are any other performance gains with Version 2 over Version 1.
G&G has made some improvement with Version 2 enhancing several areas:
First off, there is now a selector switch on both sides of the receiver allowing for left or right handed use.
Carrying on with the ambidextrous theme, G&G also added a magazine release to the left side of the receiver.
Another missing feature was a bolt lock out when your magazine was empty, this has been added and so the bolt will lock back about 1/3 the way back locking out the gun and letting you know when you are out of ammo.
The bolt release on Version 1 was just for show and did not function. On Version 2, with the bolt lock, G&G also added a working bolt release.
Those are some pretty significant improvements to the G&G Armament CM16 Raider GBB Version 2 in my books! So now it's time to test it out and see if full auto mode has been improved. I found with Version 1, that when using full auto, the G&G CM16 Raider GBB would have some trouble getting through a full mag dump but when shooting very quickly in semi auto had no problems at all.
Make sure to check back for my full review and shooting field test for the G&G CM16 Raider GBB Version 2 AR Airsoft Rifle.
Another quick revisit of the KWC/Cybergun M92 Beretta - Taurus full metal, full blowback, CO2 4.5mm Steel BB pistol series. They come in several flavors but are all made by KWC and in many cases redistributed licensed by Cybergun. This Field Test Shooting Video Review focuses on the Cybergun Swiss Arms P92 version.
I have several videos I made for the Cybergun GSG 92 version showcasing an early on Table Top Review, Field Test Review and even a Full Auto Mod Video.
Now that I have a more standardized Field Test Shooting format, I though I would revisit this series of KWC/Cybergun Beretta - Taurus Replica BB Pistols and do a follow up Field Test to get some more camera angles and hopefully a nice tight target grouping using my standard semi rested position from 20 feet away.
I also incorporate some high speed video near the end of this Field Test Shooting video Review to go along with the Chronograph and target portion of the Filed Test Shooting review.
The KWC - Cybergun Full Blowback All metal serious of Replica CO2 BB Pistols has been hugely popular over here at Replica Airguns and for good reason, they are very realistic in looks and operation, are priced very respectably and replicate several of the more popular semi auto pistols.
Type: Airsoft.
Manufacturer:King Arms.
Model:Thompson M1A1 Military & M1928 Chicago (Gold & Chrome).
Materials: Metal & Wood.
Weight: 6.6 pounds.
Barrel: 15 inches, metal.
Propulsion: AEG
Action: Semi/full auto, single action.
Ammunition Type: 6mm Plastic BB (recommended .20 gram plus).
Ammunition Capacity: 420 round magazine.
FPS: 380-410.
Trigger Pull: The trigger pull on the King Arms Thompson Machine Guns is fairly short and light as it is essentially just an on-off switch for the internal electronic components. You can shoot this gun very quickly in semi auto mode, and of course even quicker when full auto is selected. As with all AEG systems their is a slight delay between when you pull the trigger and the shot is taken as the internal spring needs to compress first before releasing.
Accuracy: In many cases Airsoft guns can be just as accurate as 4.5mm BB guns, well at least at fairly close ranges, I was able to get most of my .25 gram BB 10 round target test shots within 1 inch from 30 feet away using a semi-rested position. There where a couple BB's that lengthened the group out to about 2 inches but still a very good result when you consider these are plastic BB's being used. In Terms of FPS, I did stick with the slightly heavier 2.5 gram Airsoft BB's and still got a decent 360 average 5 shot Chronograph test result making this AEG Airsoft rifle perfect for just about any Airsoft game type.
Build Quality: The King Arms 23 Karat Gold and Chrome Platted AEG Thompson Machine Guns are very well made using Aluminum Zinc Alloy bodies and real Wood Stocks, the fit and finish is very good and pretty much everything on these rifles are either metal or wood. You will have to polish these guns with a cloth from time to time since the mirror finish shows every smudge and finger print.
Realism: I'm not sure how many real 23 Karat Gold and Chrome Platted Thompson Machine Guns there are out there but there has to be at least a few ;) But going on how these guns look and feel, they are solid and very realistic. Some people have mentioned that the bolt should be on the top for some versions of the Thompson's but there are some Thompson's with the bolt on the side so I suppose we will let that one slide. The Wood stocks are a real plus adding to the overall weight and authenticity. Most parts works as they would on the real steel Thompson M1A1 Military or M1928 Chicago (Gold or Chrome) AEG Airsoft Machine Guns.
Available in the: The Canada Replica Airguns Store.
Pros:
Gorgeous Wood stock and Gold or Chrome platting.
Nice high capacity metal magazines, can be mixed and matched.
Adjustable rear sight for windage with two sight positions (Notch & Peep).
Semi and full auto selectable with really nice rate of fire.
FPS is bang on for indoor or outdoor Airsoft games.
Fully Thompson licensed.
Comes with Certificate of Authenticity.
Cons:
Does not come with a battery or charger.
Prone to finger prints and smudges.
Need to use a screw driver to get at the battery.
Comments:
I am a big fan of the King Arms Thompson line, even the all black version with the plastic stocks looks and functions great. Internally the lower cost black version is the same and having previously shot my black Thompson, I knew these blinged out 23 Karat Gold and Chrome Platted versions where also going to perform as good as they looked! I'm not so sure about buying a Gold or Chrome Thompson for everyday use, since they will get knocked around and scratched up but if you are looking for the best of the best with real wood stocks and all metal parts then make sure to consider one of the Thompson
My Vimeo Video Review for the King Arms Thompson Gold & Silver AEG Airsoft Machine Guns:
We just received an order of KWC products so if you've been waiting for some out of stock items then go take a look! By the way, the KWC Beretta / Taurus full metal blowback BB and Airsoft versions now come semi and full auto enabled!
I am jumping the gun so to speak with this field test review and showing you my field test video review for the King Arms Thompson Gold M1A1 Military AEG Airsoft Machine Gun before I've even done the table top review... Guess I just wanted to shoot this one :)
I decided to perform my field test shooting review using just the Thompson M1A1 version since the 1928 style has the same internal mechanics, there really was no point in testing them both. Other than a few cosmetic changes like a stick magazine versus the drum magazine and the forward stock pistol grip on the 1928 version, these guns are pretty much the same. I also opted for the most flashy 23 karat Gold version, well... because "Gold is Best!"
So let's get to the results! As with most of the guns I field test, I shot 5 rounds through my chronograph, this time I decided to use .25 gram Airsoft BB's for both my chronograph and target portions of this shooting review since fishing the ammo out of the stick mag was a bit of a pain ;) I was able to get a respectable 360 fps average 5 shot Chrono test which makes this AEG Airsoft rifle bang on for just about any Airsoft battle situation. I would expect to get right around 380-400 fps if I was using the lighter .20 gram BB's.
Once I stepped back to the 30 foot semi rested target position, I shot 10 rounds first in semi auto which got me a pretty nice tight 1 inch group (if you throw out the couple of fliers). In Full Auto the shot placement also stayed nice and tight spreading out to about 2 inches or so. This Classic Thompson AEG Airsoft Machine Gun definitely hits what every you are shooting at and has a nice rate of fire that's not too wasteful of BB's but still offers plenty of cover when required.
At the end of this field test shooting review for the King Arms Thompson Gold M1A1 Military AEG Airsoft Machine Gun, I shoot some water filled cans while capturing the experience in slow motion using my new iPhone 5's 720p 120 frames per second 4 times slow-motion feature.
We have some new arrivals in our Canada Replica Airguns Store that some of you who like the more flashy guns may appreciate! What makes a classic Thompson machine gun even better? First of all make sure it's got an all metal body, then add real wood furnishings and of course cover it in 23 karat gold platting or if you prefer a slightly toned down version, then go with the Chrome plating.
Thompson M1928 Chicago Grand Special - Gold/Chrome
Thompson M1A1 Military Grand Special - Gold/Chrome
6mm Plastic Airsoft BB's
420 round stick or drum magazines
AEG 8.4v (Large Type)
6.6 pounds (3000 grams)
400+ fps
Aluminum Zinc Alloy body
Real Wood
Gold version is 23K Gold Plated
Checkout my update video for the Thompson Special Gold & Chrome AEG Airsoft Rifle:
I originally made this Field Test Review Video a few months ago but had to pull it down because it featured two WE Products. The WE AK74-UN and the WE G18C which unfortunately looks a bit like a Glock. If you are not familiar with the video I made on the Glock Trademark Infringement Cease Order I received then you should probably watch that video, it will fill in some of the gaps on why I had to cut out the WE G18C portions from this video and repost it with only the parts that showcase the WE AK74-UN.
Anyways you can still read my Original Field Test Review post minus the video and photos of the WE G18C.
Type: BB Machine Gun/Rifle.
Manufacturer: Umarex USA.
Model:Steel Force (AR Platform).
Materials: Plastic and some Metal.
Weight: 3.37 pounds (1529 grams).
Barrel: Metal non-rifled.
Propulsion: CO2 x 2.
Action: Semi and 6 round burst blowback, single action only.
Ammunition Type: 4.5mm BB's.
Ammunition Capacity: 300/30 round hopper/magazine.
FPS: 430+.
Trigger Pull: The trigger pull on the Umarex Steel Force CO2 BB Machine gun is single action only, so you will need to charge the rifle by pulling back the charging handle first, one this is done the trigger is reset and ready the gun is ready to shoot. The blowback operation charges the internal bolt automatically afterwards so keep this in mind, to release the bolt you will need to take out the CO2 magazine and press the trigger. The trigger is fairly light but has some initial take up and then a bit of creep before it releases the bolt.
Accuracy: I shot the Umarex Steel Force at a target from 30 feet away in a semi rested position using both the semi auto and 6 round burst modes, the Steel Force performed very good getting around a 1.5 inch 10 shot grouping in semi auto and then spreading out a bit in 6 round burst mode which was to be expected, still a respectable grouping. Shots where well centered on the target but I did have the advantage of using a red dot scope, I found when using the none adjustable open sights that come with the Umarex Steel Force that I was shooting under the target at closer ranges. My Chrony testing did not go exactly as planned due to my temperamental Chronograph but I was able to get two shots to read and they average out at 466 fps, well over the 430 claimed fps.
Build Quality: The Umarex Steel Force CO2 BB Rifle is mostly plastic on the outside with most of it's metal parts on the inside, you will find a metal flash hider, metal trigger and metal trigger guard but other than that everything else externally is plastic. The plastic seems durable enough but it has just a bit too much shine for me which I think makes it look less like metal and more like plastic. Everything seemed to function as expected but again I would have liked to have seen a bit more metal, not necessarily the outer shell, but I feel the selector switch, sights, magazine release, charging handle and front and back sights could have been made out of metal and would have given this Umarex rifle a bit more weight and balance.
Realism: The Umarex Steel Force CO2 BB Rifle is designed on the AR platform and for the most part is about the right size shape and look of an AR pr M16 rifle. Even the selector switch, magazine release, rear adjustable stock and Charging handle function just like a real AR! Some parts are model in just for looks like the bolt release, dust cover and forward assist but at least they fully look the part. The plastic for me was the real tell here as it kind of looks like plastic where as some plastic guns are really hard to tell they are not metal, but other than that this is a pretty decent replica of an AR Rifle.
Available From: The Replica Airguns Store.
Pros:
Higher than claimed fps.
Good accuracy in both semi and 6 round burst mode.
Got lots of shots per dual CO2 (Full Hopper).
Love the adjustable AR stock which was missing and needed on the Steel Storm.
Not a bad replica of an AR platform gun.
Full auto has a very high rate of fire.
Internal blowback does give a bit of recoil feedback feel.
Lots of rials for adding on accessories.
Price point is good for a fun dull auto BB rifle.
Cons:
Sights are non adjustable.
Plastic finish could have been a bit higher grade, like what most Airsoft AR's use.
Just a bit more metal would have been nice and added to the overall weight a bit: Selector, Magazine Release, Sights, Charging handle.
Comments:
The Umarex Steel Force CO2 BB Machine Gun is for sure an improvement over the Steel Storm, first of all it is a true replica of a real rifle in production (The AR/M16 platform), it also has a rear stock that is adjustable which makes shooting this gun on target so much more easier. Overall I feel it shoots better than the Steel Storm with improved accuracy and performance. With that said the Steel Storm is still a great BB machine gun if your looking for more of a pistol SMG design. For the low cost of the Steel Force you really can not go wrong, this BB machine gun will put a smile on your face every time you take it out to shoot it.
My Vimeo Table Top and Field Test Videos for the Umarex Steel Force BB Machine Gun:
I have some more anticipated items from Umarex to show you all, and a special thanks to Bradley from Umarex for sending them my way to review.
If you like the Steel Storm then you should for sure like the Umarex Steel Force, both models share some basic mechanical attributes like semi auto and 6 round burst blowback operation, duel 12 gram CO2 cartridges, 300 round BB hoppers and 30 round spring fed magazines. The Steel Force however is more of a "replica" as it is modeled on the AR platform including an adjustable rear stock which will come in handy taming the high rate of fire 6 round burst mode.
Next up from Umarex is a classic replica of the Luger P08, it's always nice to see some older classics made into BB shooters, it may be the only way some of us will get to experience them and from what I can tell, the Umarex Legends P08 is near spot on! You won't find blowback or even a lot of actual moving parts other than the trigger, the safety and magazine release but this BB gun is all metal and well built, it has a nice weight to it with a firm double action trigger.
My last review item is not a gun but rather a gun accessory, the Umarex T.A.C. Converter which transforms several Umarex pistols into tactical PDW's. The actual models supported are the: HK USP, S&W MP40, X.B.G, CZ Enforcer, Walther P99 DOA and the now retired Umarex SA 177. With the T.A.C. Converter wrapped around your pistol of choice you are all setup with a folding stock and foregrip, not to mention anything else you may want to add onto the rails.
Keep posted for my full reviews of these items from Umarex.
Watch my Vimeo Update Video for these Umarex Products:
Type: Airsoft Pistol.
Manufacturer:Cybergun - VFC.
Model:Smith & Wesson M&P 9C.
Materials: Metal and Polymer.
Weight: 1.25 pounds (566 grams).
Barrel: 3 inches, metal non-rifled.
Propulsion: GBB - Green Gas or Propane.
Action: Semi & full auto, single action only with full blowback.
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 16 round full size drop out metal magazine.
FPS: 280+.
Trigger Pull: The Single Action Only trigger pull on the Cybergun - VFC Smith & Wesson M&P 9C GBB Airsoft Pistol is kind of what I would expect form the real Smith & Wesson M&P 9C, fairly light with a small amount of take-up and creep but still fairly short. And the trigger safety actually works just the same as the real steel Smith & Wesson M&P 9C!
Accuracy: I have already done my dedicated Field Test Shooting Video for the Cybergun - VFC Smith & Wesson M&P 9C GBB Airsoft Pistol so check out the link here, This very short barreled pistol is not going to win any target shooting contests but it faired well and even shot a bit tighter groupings and higher fps than I expected. Most importantly it worked exactly as it was supposed to without any problems.
Build Quality: The Cybergun - VFC Smith & Wesson M&P 9C GBB Airsoft Pistol is extremely well built and you will find metal and polymer in pretty much the same places as you would find on a real S&W M&P 9C. Fit and finish and quality of materials seems really good, I am really happy with the work VFC is doing with their guns, at least from what I see here with their Smith & Wesson M&P 9C GBB Airsoft Pistol.
Realism: The Cybergun - VFC Smith & Wesson M&P 9C GBB Airsoft Pistol is based on the real steel version Smith & Wesson M&P 9C and I have to say this is one of the most bang on replications of any gun I have seen, you would have to get right up close to tell the difference and only then if you looked at either the magazine or you could see the inner Airsoft barrel. This gun is juts that realistic. There is Smith & Wesson licensing and marking all over this gun and even the white warning instructions on the right side of the slide. Of course this Airsoft Replica Pistol field strips and functions just like the real Smith & Wesson M&P 9C Pistol.
Purchase it from:The Replica Airguns Store
Pros:
Very good weight and solid feeling gun for being so compact.
Full size drop out metal magazine.
Nice snappy blowback action.
Excellent fit and finish.
Extremely accurate looking and working Smith & Wesson M&P 9C - Fully licensed..
Rear sight is adjustable for windage.
White dot sights for quick target acquisition
Working trigger safety
Fully field strip-able.
Cons:
Comes with an orange tip not required for Canada.
White dot sights need to be install?
Right side slide catch-release is for show only - non-functioning.
Comments:
Overall the Cybergun - VFC Smith & Wesson M&P 9C GBB Airsoft Pistol as I said is really a wonderful replica in terms of realism in looks and function, I wish all Airsoft guns and Airguns paid this much attention to the details. But more than that, the Cybergun - VFC Smith & Wesson M&P 9C is really well put together and even though it is small it feels tuff and well made. I could see myself using this exact pistol as a backup gun for some future Airsoft battles :) I hope to have the opportunity to review more guns made by VFS down the road...
My Vimeo Video Review for the Cybergun - VFC Smith & Wesson M&P 9C GBB Airsoft Pistol:
I have a near new condition Semi and Full Auto EKOL Jackal Dual Compact Front Firing 9mm P.A.K. Blank Gun up for Silent Auction! It comes in the original plastic hard shell case along with the flare adaptor, take down key and of course a 15 round magazine.
To get in on the bidding, simply Email Me Here with your highest bid by no later than July 22nd 2013 by midnight. At the conclusion of this Silent Auction I will notify the winner and they will have 24 hours to make payment before I move onto the next highest bidder.
This Rare EKOL Blank Gun Silent Auction is open to my Canada customers since we sell EKOL guns in the US Replica Airguns store, Canadian Customers will pay an additional $17.99 for Shipping/Handling plus their local provincial sales Tax. Good luck to everyone!
You can watch my earlier Review videos for this Front Firing Blank gun here:
All references, photos and video claiming that any item in this review/video looks like a Glock or is a Replica of a Glock in any way shape or form have been removed from this post as requested by Glock "Renzulli Law Firm"
I almost forgot to do my field test review for my WE AK-74UN & WE G18C Tactical GBB Airsoft Pistol and Rifle! I decided to do them both together on this one but I still did my usual full testing for both guns which consisted of my Chronograph, Target and Can destruction along with some high speed slow motion of the blowback action of both guns in full auto mode.
Photo of WE G18C Removed by Request from Glock "Renzulli Law Firm"
Your best bet is to watch my Youtube video and see how both of these WE Airsoft guns perform. Overall they are both rally nice and super realistic, the WE G18C Tactical is definitely the full auto monster here while the AK-74UN is the bull in the China store with its crazy heavy blowback action, it has so much recoil that when shooting in full auto it kind of runs our of steam near the end, not so with the WE G18C as it did not slow down even with the 50 round magazine loaded up!
The WE AK-74UN even with it's crazy recoil holds on target very well in semi and full auto and of course has the superior fps performance. I found when shooting the G18C in full auto, I needed to hold my aim-point low as the blowback and super fast cycle rate wanted to pull the gun up and over my target, same would be true with a real gun so no surprise here.
Photo of WE G18C Removed by Request from Glock "Renzulli Law Firm"
