Type: Airsoft Machine Pistol.

Manufacturer:ASG.

Model: ASG/KWC MP9 A3.

Materials: Metal & plastic.

Weight: 3.9 pounds.

Barrel: 5.5 inches, smooth bore.

Propulsion: GBB - Gas Blowback.

Action: Semi-full auto selectable SAO.

Ammunition Type: Airsoft 6mm Plastic BB's.

Ammunition Capacity: 48 rounds.

FPS: Up-to 375.

Trigger Pull: The trigger pull on the ASG/KWC MP9 A3 is single action only as the charging handle has to be pulled back to open and release the bolt for the first shot. There is a trigger safety but it is not noticeable when shooting this Airsoft machine gun. There is a short take-up and then a light release and short reset.

Accuracy: Right away I put my NcSTAR 1x25 Red Dot sight on the ASG/KWC MP9 A3 as it was a perfect fit for this small and compact machine pistol, it did not take long to sight it in and I was able to get decent accuracy in both semi auto and full auto burst due to the mild but very fast cycle rate. I was able to get a 2 inch grouping at 30 feet out using a rested position. In full auto mode the grouping did not really get too much wider. I also got between 350 and 370 fps when testing the ASG MP9 on my Chronograph.

Build Quality: The ASG/KWC MP9 A3 Airsoft Machine Pistol is built very well, using similar components that you would find on the real steel version so yes it has a plastic shell but that is to be expected. The ASG/KWC MP9 A3 does use lots of metal where it needs to be like in the internal parts, pins, bolt, barrel, rails and even the magazine. The fit and finish is near perfect!

Realism: I have to say the ASG/KWC MP9 A3 is pretty much a bang on copy of the real steel Brügger & Thomet MP9 A3. The only telltale sign is the ASG branding on the right side along with the 6mm caliber beside the ASG logo. One other small detail is the magazine which is metal on the Airsoft version where as you would find the real version uses a transparent polymer magazine.

Available at the:Canada Replica Airguns Store.

Pros:

• Extremely fun to shoot and it sounds awesome!

• Rate of fire is very fast and does not slow down much even when the gas is running low.

• Good overall power for a short barreled gas blowback gun.

• Very nice trigger with working trigger safety.

• Excellent replica of the real steel version in just about every way.

• Can add a lot of gear and make this gun your own.

• Decent price for all you get out of the ASG MP9!

Cons:

• Bolt didn't lock back for me when the gun got really cold?

• Real magazine would actually be transparent polymer.

Comments:

I really like the ASG/KWC MP9 A3! I love the look, I love the features and the price is also really good for what you are getting. I was really impressed with the super high cycle rate and because of the small low weight bolt the gun does not move around too much or slow down in rounds per minute even when you do a full mag dump. There is however just enough blowback recoil to give you that GBB realistic feel! I also found that the magazine holds a lot of gas so it is possible to get two magazine worth of shots out of a single fill, that's around 100 shots. I also like how easy it is to add to the ASG/KWC MP9 A3, I had mine pimped out and looking amazing right away and suggest if you get one you do the same :)

My Vimeo Video of the ASG/KWC MP9 A3 Airsoft Machine Pistol:

Buy the ASG MP9 A3 in Canada  -   Buy similar Airsoft Gun in the US

This one has to be the coolest Machine Pistols out there!

The KWA (ASG) B&T MP9 A3 Black GBB is a compact gas blowback machine pistol licensed by the original manufacturer Brügger & Thomet, Switzerland. The A3 version has a bottom rail and a folding stock and the whole body is made of reinforced fiber polymer. The whole construction of the MP9 is very realistic and it is field stripped as the real thing. The cocking handle is functional with the realistic metal bolt. The B&T MP9 has adjustable hop-up and both semi and full auto firing mode can be selected. Furthermore the trigger has an active safety function.

• Plastic 6mm Airsoft BB's
• (GBB) Gas Blow Back
• Semi & Full Auto
• 366+ fps w/ .2g
• Adjustable Hop Up
• 3.9 lbs
• 48 Round Magazine
• 11.5 Inches Folded - 20.5 Inches Open
• Reinforced Fiber Polymer Body
• Field Strips like the Real Steel
• NO CLEAR sections (All Black) and does NOT have orange tip!

Buy the ASG MP9 A3 in Canada  -   Buy similar Airsoft Gun in the US

Type: Airsoft Assault Rifle.

Manufacturer:WE.

Model: G39C.

Materials: Metal & plastic.

Weight: 6.1 pounds.

Barrel: 9.5 inches, smooth bore.

Propulsion: (GBB) Gas Blowback.

Action: Semi & full auto.

Ammunition Type: Airsoft 6mm Plastic BB's.

Ammunition Capacity: 32 rounds.

FPS: Up-to 420.

Trigger Pull: The trigger pull on the WE G39C is about what you would expect from a Single action only Semi Auto rifle, it has a very slight take up and then about a 4 pound trigger pull that is crisp and smooth.

Accuracy: Out of the Box the WE G39C shot great up close and farther out, the hop-up seemed to be already dialed in, and even though I was using only .20 gram BB's which is a bit light for this gun, I still found they tracked well and stayed on target both near and far. My 30 foot semi rested testing produced a nice 2 inch grouping. Shooting the barrel out on the tactical range I did have to aim just a bit higher when back out at 60 or more feet away. Maybe a slight bit more hop-up would do the trick.

Build Quality: The WE G39C is very well made, yes it has lots of polymer but so does the real version and the plastic seems very durable, The fit and finish looked great and there is a lot of metal in and around the G39C where it would be on the real steel gun and where it is really required to be. Like the trigger, flash hider, rails, pins, switches, rear sight, magazine and most internal parts also.

Realism: I bet if you had the real G36C sitting beside the WE G39C you would be hard pressed to tell them apart? WE did a great job making this Airsoft version very believable not just in appearance but also when field stripping it and shooting it with it's heavy bolt and felt blowback recoil.

Available at the:Canada Replica Airguns Store.

Pros:

• Amazing attention to detail, just like the real H&K G36C.

• All metal internals and metal external mechanical parts.

• Semi auto & full auto selectable.

• Awesome blowback kick really hits you in the shoulder.

• Field strips just like the real steal version.

• Nice high 400 FPS and good accuracy near and far.

• Full ambidextrous, even the charging handle can be switched side to side.

• Can get up to three magazines per propane fill up.

• Very well priced for how awesome it really is.

Cons:

• Some people may not like that it is a polymer built gun externally but it is what it is!

• And that's it!

Comments:

So far I have been impressed with We an Airsoft company, they really know how to make very realistic and high quality products. I wasn't sure if I was going to like the mostly polymer external build on this gun but the sheer quality and solid build took away any ideas that tis Airsoft gun would be anything like a toy. The WE G39C is one of the best performing GBB Airsoft guns I have tried out getting up to 90 shots per gas fill on a magazine which is very impressive. We was also able to keep the price down which means more people can get into one of the G39C's. If you've been thinking about adding one of these to your arsenal I don't see any reason why not to!

Buy the WE G39C in Canada

Buy Airsoft Rifles in the US

Photo of Mystery KSC Removed by Request from Glock "Renzulli Law Firm"

All references, photos and video claiming that any item in this Review/Video looks like a Glock or is a Replica of a Glock in any way shape or form have been removed from this post as requested by Glock"Renzulli Law Firm"

Type: Airsoft GBB pistol.
Manufacturer: KSC?
Model: NAME REMOVED 17.
Materials: Plastic & metal.
Weight: 1.6 pounds.
Barrel: 4 inch, non-rifled.
Propulsion: GBB - Propane.
Action: Semi auto - single action only.
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 23 round drop out all metal magazine.
FPS: Up to 330.
Trigger Pull: The trigger pull on this Mystery NAME REMOVED 17 GBB Airsoft pistol is very nice with some take-up at the beginning but once you hit the resistance part it is smooth and the release is very light. The NAME REMOVED trigger safety actually works on this model which is a nice touch!

Photo of Mystery KSC Removed by Request from Glock "Renzulli Law Firm" 

Accuracy: I found the (KSC) NAME REMOVED 17 to have very good accuracy, getting about a 2 inch 8 shot grouping from 20 feet out in a semi rested position (sand bag up front, standing in the back). I also put 5 rounds through my Chrony Chronograph and this Airsoft Gas Blowback pistol averaged right around 326 fps using .20 gram 6mm plastic Airsoft BB's.

Photo of Mystery KSC Removed by Request from Glock "Renzulli Law Firm" 

Build Quality: The (KSC) NAME REMOVED 17 Airsoft pistol uses a combination of plastic and metal and has a decent overall weight and feel to it thanks to the full size drop out metal magazine. The frame like a real NAME REMOVED is plastic but the slide and outer barrel are also plastic which on real steel NAME REMOVED would not be the case. Even so the overall weight is good and the fit and finish is very good. Even though this is a pre-owned Airsoft gun it is in as-new condition and seems to be holding up very well.

Photo of Mystery KSC Removed by Request from Glock "Renzulli Law Firm" 

Realism: The (KSC) Airsoft NAME REMOVED 17 is very realistic in appearance and operation with all parts working exactly as they would on a real NAME REMOVED 17. Even the trigger safety works and field stripping this Airsoft gun is the same as a real NAME REMOVED. NAME REMOVED trademarks are present throughout, the only real giveaway is the plastic slide and outer barrel but you would need to examine this gun close up to see this for yourself.
Purchased privately, check out some other Airsoft guns in the Replica Airguns Store.

Photo of Mystery KSC Removed by Request from Glock "Renzulli Law Firm"

Pros:

• Very realistic and accurate licensing.
• Got a tight two inch group but was a bit low, hop up should get it back up.
• Decent FPS for a short barreled GBB Airsoft gun.
• Even thought the frame and slide are polymer, it has good weight to it.
• Everything works like the original, field strips and most mechanical parts are metal.
• High capacity 23 round full size drop out metal magazine.
• Adjustable rear sight for windage but is a bit lose on mine.
• Good usage of the gas - two full magazines.

Photo of Mystery KSC Removed by Request from Glock "Renzulli Law Firm"

Cons:

• Hard to get here in Canada.
• Mostly plastic main build - slide and outer barrel are plastic.
• Rear sight was a bit lose.

Comments:
I am hoping that someone will know for sure who make this Airsoft NAME REMOVED 17 but either way it has been great playing around with it and doing my research to see if I could find out on my own. It's hard to tell you to go out and get one because I'm not sure what to go out and get at this point or even if this version can still be purchased and if so where from? All these questions... I can tell you that it's great to finally have an actual NAME REMOVED replica in my collection, I have a few NAME REMOVED-like guns but until I got my hand on this Mystery NAME REMOVED 17 GBB Airsoft pistol I really only had close proximities. So if you have the opportunity to snatch up something like this I say go for it!

Photo of Mystery KSC Removed by Request from Glock "Renzulli Law Firm"

Watch my YouTube Full Video Review of this Mystery NAME REMOVED 17 Airsoft Pistol:

Buy Airsoft Pistols in Canada  -  Buy Airsoft Pistols in the US

I already posted that I recently hit 10,000,00 YouTube video Views but I have been hinting about there being another Giveaway/Contest. After much thought I wanted to have a way that more than just one person could benefit from this. So I decided to list a bunch of my Canada Store products on sale. (Sorry US customers but I have a lot more restrictions in the US when it comes to what I can do with my pricing).

These Canadian sales will be in effect from now until October 10th and to make things even better, one lucky shopper during this time will get their entire order for free (This includes US Customers too).

So make sure to get in on the savings and the chance to get your order free!

In this "Update Video" I also show off some new previously owned guns added to my collection, an Airsoft ASG shell ejecting CZ 75, a no-name KSC Airsoft shooter and a Gamo Combat .177 caliber pellet revolver. And if you're into spring piston break barrel pistols, make sure to watch for my customized Exisco XSP180 .177 caliber Verminator!

Ten Million Video Views Giveaway Plus CZ 75 - Glock Airsoft - Gamo Combat Pellet Revolver

Here is a sample of some of the items on sale right now...

Buy King Arms M4A1 in Canada 

Buy King Arms M4A1 in the US

Buy Webley Alecto in Canada

Buy Webley Alecto in the US

Buy EKOL ES55 in Canada

Buy EKOL ES55 in the US

Check out all items on Sale Now!

Type: 6mm Plastic BB Airsoft Pistols.

Manufacturer:KJWorks.

Model:KP-02, KP-07, Elite A1

Materials: Metal slides & frames.

Weight: 2/2.1/2 pounds.

Barrel: Metalnon-rifled smooth bore.

Propulsion: 12 gram CO2.

Action: Blowback, Single action only on KP-07 - Single/Double action on KP-02 & Elite 1A

Ammunition Type: 6mm plastic Airsoft BB's.

Ammunition Capacity: 20/22/20 rounds.

FPS: 366+ fps.

Trigger Pull: The trigger pull on all of these KJWorks Airsoft guns is very nice in both single and double action, The KP-07's true single action only 1911 trigger is a beauty, with no take up at all and a very light and smooth release. The Beretta Elite 1A is the next best with a surprisingly light weight double action trigger. All of these guns will be shooting primarily in single action as the blowback precooks the hammer with each shot.

Accuracy: I shot all of these fine KJWorks Airsoft guns from 20 feet out in semi rested position and got very similar results. I was able to place 10 rounds in a 2 to 2.5 inch grouping for all guns, with the KP-07 1911 shooting the most well centered. The Beretta Elite 1A shot well centered also but just a hair under center mass while the KP-02 seemed to shoot low but could be adjusted to shoot higher by increasing the hopup. All three KJWorks Airsoft pistols got right around the 330-350 fps mark (5 shot average chrony testing) with the KP-7 1911 and Elite 1A Beretta hitting the higher end and the KP-02 Sig P229 getting right around 330fps. All three KJWorks Blowback Airsoft guns should be able to hit 366+fps in the right shooting conditions.

Build Quality: I was extremely impressed with the build quality of these KJWorks Airsoft guns, the fit and finish is the best I have seen on any of my guns including Airguns also. Even after shooting several magazines worth of BB's, the painted metal friction areas did not seem to show nearly as much wear as some of my other blowback guns. The tolerances between the moving parts like the slide and frame are very tight showing excellent workmanship and machining with these KJWorks Airsoft guns.

Realism: All of these KJWorks 6mm Airsoft pistols are based on real steal versions of the same guns (KP-02 is a Sig Sauer P229 copy, the KP-07 is a Colt 1911 copy and the Elite 1A is a Beretta Copy). They are very good replicas even though the KP-02 and KP-07 do not have any specific licensing on them. The Elite 1A does have licensing which is a plus. The only negative thing I can think of is the fact that the KP-02 has the rather unusual CO2 magazine that sticks out of the bottom of the handle that is not at all like a real P229 magazine. I do believe you can find a GBB magazine that would be much more in line with the real steel version of this magazine.

Available in the:Replica Airguns Store

Pros:

• All metal guns with good overall realistic weights.

• Very heavy blowback on all guns, especially the KP-07 1911

• Excellent fit and finish - best I have seen.

• Nice mid range fps - great for on the field.

• Very consistent accuracy for all KJWorks Airsoft guns.

• Very believable replicas of the real steel versions.

Cons:

• KP-2 and KP-07 did not have official licensing.

• All seem to go through CO2/Gas fairly fast.

• KP-02 had a rather strange looking CO2 magazine.

• KP-02 slide did not lock back after last shot, may be due to CO2 magazine configuration.

Comments:

I guess you get what you pay for, these KJWorks Airsoft guns do fetch a bit higher price but when you take them out of the box and really look at them closely you can see why, they are pretty much flawless and the fit and tolerances are very good with very little play in the mechanical parts. Shooting these guns is just as wonderful, they all worked very well and got consistent accuracy and fps between shots. There where no ammo loading problems and no unexpected behaviors with any of these Airsoft pistols. If you can afford to pay that little bit more for one of these very high quality KJWorks Blowback Airsoft guns, you will not be let down!

Buy the KP-02 Airsoft Pistol in Canada 

Buy Airsoft Guns in the US

Buy the KP-07 Airsoft Pistol in Canada

Buy Airsoft Guns in the US

Buy the M9 Elite 1A Airsoft Pistol in Canada

Buy Airsoft Guns in the US

Here is a short video update along with a few photos of my KWC and Umarex Airsoft Pistols recently added to the Canada Replica Airguns Store. The models showcased are the KWC M1911 & KWC M92 (PT99) along with the Umarex Walther P99. All of these pistols use 6mm plastic Airsoft BB's, shoot over 366 fps using CO2 and have blowback operation.

Watch my Vimeo Update Video on these three Blowback Airsoft Pistols:

Buy This Airsoft Pistol in Canada  -  Buy KWC Airsoft guns in the US

Buy This Airsoft Pistol in Canada  -  Buy KWC Airsoft guns in the US

Buy this Airsoft Pistol in Canada  -  Buy this Airsoft Pistol in the US

Last but not least for now, just added to the Canada Replica Airguns Store - the KWC M92 (PT99) CO2 Blowback Airsoft Pistol.

The KWC M92 (PT99) is essentially is the Airsoft KWC version of the Cybergun GSG 92 without any branding and also in 6mm Airsoft caliber. And it comes already to shoot in either semi or full auto so no modifications required!

The KWC M92 PT99 features a full size drop out metal magazine that holds both the 6mm Plastic Airsoft BB's and the CO2 cartridge. It features a working slide with realistic blowback operation and can be fully field stripped just like the actual sidearm.

• 6mm Plastic Airsoft BB's
• CO2 Powered
• 26 round magazine
• 366+ fps
• 2.4 pounds
• 4.1 inch brass non-rifled barrel
• Single and double action
• Semi/Fully Auto Selectable
• Blowback operation
• All metal design
• Beretta FS 92 look

 Buy This Airsoft Pistol in Canada  -  Buy KWC Airsoft guns in the US

KWC Tanfoglio Witness 1911 Airsoft clone Added to the Canada Replica Airguns Store.

The KWC M1911 is essentially is the Airsoft KWC version of the Cybergun Tanfoglio Witness 1911 without any branding and also in 6mm Airsoft caliber.

The KWC M1911 features a full size drop out metal magazine that holds both the 6mm Plastic Airsoft BB's and the CO2 cartridge. It features a working slide with realistic blowback operation and can be fully field stripped just like the actual 1911 sidearm.

• 6mm Plastic Airsoft BB's
• CO2 Powered
• 17 round full size drop out magazine
• 366+ fps
• 2 pounds
• 8.6 inch length
• Semi auto, single action only
• Blowback operation
• All metal design
• Government 1911 A1 replica

Buy This Airsoft Pistol in Canada  -  Buy KWC Airsoft guns in the US

Another Blowback Airsoft pistol added to the Canada Replica Airguns Store and this one won't break the bank!

The Umarex Walther P99, one of Walther's most popular semi auto pistols. This CO2 powered Airsoft version captures the realism with its BLOWBACK, semi-automatic action and full metal slide.

A 12g CO2 cylinder loads in the back of the grip and the Airsoft BB magazine releases with the push of a realistic magazine release lever. The recoil action made live by the power of CO2 kicks the slide back giving you that oh-so-realistic feel. A great pistol for Target, Airsoft Games and owners of the P99 or similar firearms.

• 6mm Airsoft Plastic BB's
• CO2 Powered
• 15 round drop out metal magazine
• Up to 380 fps
• 1.5 pounds
• 7.25 inch length
• Double action only
• Blowback
• Metal slide - polymer frame
• Tactical Rail Mount
• Fully Licensed
• Comes with red tip (Can be removed with a bit of work ;)

Buy this Airsoft Pistol in Canada  -  Buy this Airsoft Pistol in the US

Last update for the day, I am happy to announce that I have added two Gas Blowback Airsoft Rifles from WE to the Canada Replica Airguns Store. They are both fantastic guns that are the spitting image of their real steel counterparts and both have awesome blowback action and feel. Both rifles shoot in semi and full auto which is exhilarating!

WE G39C (H&K G36) Open Bolt GBB Reinforced Airsoft Rifle

WE M4 CQBR Open Bolt GBB Full Metal Airsoft Rifle

Some more asked for blowback Airsoft pistols just added to the Canada Replica Airguns Store, these three are from KJWORKS and are very high quality for sure with excellent fit and finish on them!

KJWORKS P229 KP-02 Full Metal CO2 Blow Back Airsoft Pistol

KJWORKS MEU KP-07 Full Metal Gas Blow Back Airsoft Pistol

KJWORKS M9 Elite IA Full Metal CO2 Blow Back Airsoft Pistol

Two very nice KWC Blowback Airsoft Pistols where add to the Canada Replica Airguns store and yes one is the large and in charge Desert Eagle!

KWC .50 Desert Eagle CO2 Blowback Airsoft Pistol

KWC SW40F (S&W Sigma) CO2 Blowback Airsoft Pistol

I am super happy to announce a bunch of new Canada Store Products coming very soon. I have sourced out some Blowback Airsoft pistols and also a couple of GBB We Airsoft Rifles. (KJWorks: Elite 1A, KP-07, KP-02) (KWC: DE .50, SW40F) (RAM P99) (WE: G39C, M4 CQBR).

I am also adding some airgun pistols that I have not been able to find a supplier for here in Canada up until now, and I will also be adding them to the Canada Store shortly. (Umarex: Browning Buck Mark URX, XBG, Beretta 90two).

And of course the addition of some new accessories that I have been wanting to have listed in the Canada Store for some time now. (Daisy Zinc Coated BB's, Umarex CP99 - PPK - Rotary Magazines, Body Guard Mace Spray, Schrade Hand Cuffs)

So if your interested in any of these items then keep checking back, I will be adding them to the Canada Store as quick as I can - time permitting!

It's always good to start the week off with an update video so everyone knows what's happening short-term and long-term...

I recently acquired a couple new items that I will be reviewing in the near future (along with several other reviews that I will be trying to get to ASAP!) First off is the Crosman M4-177 which is basically a multi-pump pellet and BB shooting replica of an AR or M4 styled carbine used by the US military. The Crosman M4-177 is mostly plastic on the outside but on first inspection seems to be built fairly well. It has removable metal sights and the magazine is also detachable but is not used as a magazine but rather a compartment for storage. The unit I have is the Canadian detuned version which shoots .177 caliber lead pellets and 4.5mm steel BB's at under 500 fps.

I don't currently sell the Crosman M4-177 in the Canada Replica Airguns Store but I do have it available for purchase in the US Replica Airguns Store for my US customers.

I also received my first old west blank shooting revolver (M1873), I have wanted one of these for a while and finally got my hands on one :) Unfortunately this one has a plugged barrel so it vents out of the cylinder area which may get a bit messy. I may see about making this one a front venting gun if possible and of course as long as it's within the law as I plan to make sure the cylinder stays semi plugged so no actual rounds could ever be shot out of it. The Old West M1873 Blank Revolver holds six .380 crimped blanks and is an all metal and wood construction. This should be a fun review!

I also touch upon a few other guns on the list of items I need to review and by the way in an attempt to get caught up I will be doing my Table Top and Shooting reviews combined.

Here are some of the guns that I will be reviewing over the next while...

• Gamo P-25 & PT-85 .177 Caliber Blowback Pellet pistols (This one will get done this week!)

• Daisy Powerline 5501 Blowback 4.5mm BB pistol.

• Webley Tempest .177 & .22 Caliber Spring Piston Air Pistol.

• Western Arms Smith & Wesson Shorty 40 Blowback 6mm Airsoft Pistol.

• Kimar Lady K Stainless Steel 9mm P.A.K. Blank Pistol

• EKOL Lady Chrome 9mm P.A.K. Blank Pistol. 

Type: Airsoft.

Manufacturer:Western Arms (WA).

Model:Shorty 40.

Materials: Polymer & Metal.

Weight: 1.7 pounds.

Barrel: 3 inches, metal.

Propulsion: GBB

Action: Semi auto, single & double action.

Ammunition Type: 6mm plastic BB (recommended .20 gram).

Ammunition Capacity: 20 round magazine.

FPS: 260-270.

Trigger Pull: The trigger pull on the Western Arms Smith & Wesson Shorty 40 is very light in both single and double action but of course the lightest when shooting in single action mode. The single action is short with next to no reset making for very quick followup shots. If you have de-cocked the gun using the de-cocker, you may find it hard to re-cock again as there is no exposed hammer to grab. You will need to pull the trigger just a bit to expose the hammer and then pull it back the rest of the way as per normal.

Accuracy: This is now the third Airsoft gun I have tested and I always assumed Airsoft guns would not be nearly as accurate as my metal BB shooters but again I have been proven wrong! The WA S&W Shorty 40 even with its short 3 inch barrel got a nice 2 inch group my first time testing it out from 20 feet out in a free standing position. And 4 shots got right in the bullseye! Considering this Airsoft gun was supposed to be non-working, it worked pretty good for me!

Build Quality: When you first pickup the Western Arms Smith & Wesson Shorty .40, you immediately think it is an all metal gun since it's all black and has really good weight to it sitting in at 1.7 pounds and in a very small package. On close up inspection the WA Shorty 40 has a lot of plastic in it including the slide and the frame. Polymer frames are not uncommon and to be honest if the gun looks and feels like metal but is actually plastic, there are some benefits. This review model being used has seen some action but it looks pretty much like a brand new gun, the reason being is because of the plastic exterior - in general, plastic is not painted but rather the color is throughout the material so it will not rub off or show a scratch nearly as much as a painted or blued finishe which will show the grey metal underneath. And to be fair, my Western Arms Shorty 40 has lots of high quality metal parts where they really need to be like the magazine, magazine release, slide catch, trigger, hammer, barrel and many other internal parts.

Realism: From looking at photos of the real Smith & Wesson Shorty 40, I can say the Airsoft version is a dead ringer. The Western Arms version has all the markings and and licensing in all the right places and from what I can tell without actually having used the real steel version, it seems to function and even field strip like the real .40 caliber model. The only real telltale sign are the plastic parts but as I said before it is very hard to tell because of this Airsoft guns heavy weight.

Purchased From: Used.

Pros:

• I got this one as a bargain ($50) to say the least.

• Very realistic replica with full licensing.

• Seems to be very accurate for a short barreled Airsoft pistol.

• Decent FPS for a compact GBB Airsoft gun.

• Even thought the frame and slide are polymer, it has very good weight and feel to it.

• Everything works like the original, field strips and most mechanical parts are metal.

• Safety also works as the de-cocker.

• Adjustable rear sight for windage.

• Very nice light single and double action trigger.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

Cons:

• Hard to find this one, not in production as far as I know?

• Plastic slide and frame but still very high quality.

• Seems to go through gas fast - 20 BB's and it's done!

Comments:

For those of you who have been a bit down on the Airsoft guns I have been reviewing, maybe you just haven't put your hands on the right ones so far? I am now on my third Airsoft product review and I have received all kinds of comments from people ranging from very positive to very negative, with some people comparing Airsoft guns to kids toys. The funny thing is it's all about perspective - people who only shoot powder burners will say an Airgun is a toy but again many powder burner shooters also shoot airguns for economical and practical reasons. I think we should respect peoples interest and if it's not for you then stick with what is for you but at least first give it a chance. I plan to take part in some Airsoft games so this is a great time for me to see what Airsoft guns I like and will work well once I get in a battle situation. Now getting back to the Western Arms Smith & Wesson Shorty 40 at hand... It is a pleasure to shoot and for a "Broken" gun it sure works well, I wonder what a new pristine condition one would shoot like? It's hard for me to tell you to go out and buy one since they are not readily available but if you do manage to come across one, grab it if you can!

My Vimeo Video Review for the Western Arms Smith & Wesson Shorty 40 Airsoft Pistol:

Buy Airsoft guns in Canada   -   Buy Airsoft Pistols in the US

I already mentioned all three of these gun in my previous posts, two being Airsoft: the King Arms Colt M4A1 All Metal and my Western Arms Shorty .40. And one being a 4.5mm steel BB shooter, the Swiss Arms Sig Sauer GSR 1911. I wanted to make you a quick YouTube Preview video to show you around all three replica guns before I get around to actually doing my full reviews for each of them.

I will most likely start off with my King Arms Colt M4A1 All Metal Airsoft rifle, then review my Swiss Arms Sig Sauer GSR 1911 4.5mm BB pistol, then finish off with my deal Airsoft pistol, the Western Arms Shorty 40.

This preview video should give you a good idea about these guns, but make sure to stay tuned for my full review videos for each of them.

Buy this Airsoft rifle in Canada   -   Buy this Airsoft rifle in the US

Buy Swiss Arms GSR 1911 in Canada

Every once in a while you get kind of lucky and get a real steel on something. Here in Canada, getting your hands on an "all black" Airsoft pistol is kind of hard since they are literally impossible to import as they are considered replicas unless they shoot "over" a set fps which most Airsoft pistols have trouble obtaining. There are some all black guns floating around from before the import restriction and there are some that slip through the cracks.

Yesterday I went into my local Army Surplus store (they also sell Airsoft guns) and saw a rather interesting little black pistol in behind the glass, something I had never seen before. When I looked at it a bit close it was in fact an all black GBB Airsoft pistol version of the Smith & Wesson .40 caliber Shorty! The sales person quickly told me the $50 price tag was because it was non-functioning or as he called it a "Grave Yard Special" I though hey, makes for a nice replica even if it does not work and so I bought it on the spot.

As is pretty normal for me, I rarely take anyone at their word and like to check things out for myself. So I loaded the magazine up with propane, added 20 BB's to the magazine and headed to my deck to give it a try. 20 rounds later and with my slide locked back I came to the conclusion that there was nothing wrong with this Airsoft catch of the day!

If your wondering where to get one I am not really sure, I did see them online in some overseas sites for around $220 or so. So my $50 was well spent ;)

I am in the process of making a "preview video" of this gun and will do a follow up full review video down the road a bit.

 Buy Airsoft guns in Canada   -   Buy Airsoft Pistols in the US

I have been asked so many times to make a "How To Video" on cleaning Airguns and Blank Guns so I thought I better make the video so people stop asking me to make one :) and if they do ask, which I am sure they still will, then I will be able to direct them to this awesome video tutorial...

So basically in this video I clean an Airgun that can be field stripped and I also clean an Airgun that can not easily be field stripped. I then clean a blank gun even thought the process is very much the same.

I also talk a bit about cleaners and general air gun maintenance but for the most part I just show you how to clean the guns so watch the video!

If you have not already read my Table Top review for the WE SCAR-L, then make sure to check it out for specifications and an overall review of this very nice Blowback Airsoft rifle.

This Field Test review kind of baffled me, I was surprised with almost everything about it. Initially when I got my WE SCAR, I tested it out with one of my CO2 mags and got some pretty decent results not only in FPS performance but also in the accuracy department, I got around 400+fps and a nice 2 inch group from 30 feet out in a semi-rested position.

So when I headed out to record my Field Test, I was expecting some decent results! I'm not going to say this gun let me down but it did perform radically different for me on this day then the previous day and the only real difference is that I did a complete filed strip, clean and lube of the Airsoft rifle which in my opinion should of improved things but I guess not?

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

The most surprising realization I had was that with CO2 (as compared to the Propane), I did notice a heavier blowback and faster rate of fire in full auto but for some reason I had less velocity by almost 100fps when compared to using my Propane magazine? And my accuracy suffered also by an amazing amount. Some rounds had trouble even getting on the paper?

I will revisit this rifle in the summer, I think I will strip it down and wipe it down and perhaps redo this test entirely! I still love this Airsoft blowback rifle for so many reasons but on this day at least it came up a bit short for me.

My Vimeo Video Field Test Review for the WE AWSS SCAR-L - SCAR Type Rifle:

Buy Airsoft rifles in Canada

Buy Airsoft rifles in the US