I have had a few Umarex Magazines but not as many as I would like to, now you can get some more popular Umarex Magazines for the following Umarex airguns:

• CP99 Compact
• PPK/S
• CP88 - 8 Shot Rotary
• CP99 - 8 Shot Rotary
• CPSport - 8 Shot Rotary
• Beretta M 92FS - 8 Shot Rotary
• Colt 1911 A1 - 8 Shot Rotary
• H&K P30 - 8 Shot Rotary
• PPQ - 8 Shot Rotary
• S&W M&P 45 - 8 Shot Rotary
• Walther Lever Action Rifle - 8 Shot Rotary 

You can get these Umarex Magazines in the Canada Store > Accessories > Air Guns > Magazines Section. Or click here!

It's about time! I have been holding out for some Zinc coated BB's as they are my ammo of choice, I feel they keep your gun a lot cleaner as the copper coated BB's can tend to leave a dusty rust colored residue behind.

You can get the Daisy Zinc Coated BB's in either 4000 or 6000 count bottles located in the Canada Store > Accessories > Air Guns > Ammo Section. Or click here!

I am super happy to announce a bunch of new Canada Store Products coming very soon. I have sourced out some Blowback Airsoft pistols and also a couple of GBB We Airsoft Rifles. (KJWorks: Elite 1A, KP-07, KP-02) (KWC: DE .50, SW40F) (RAM P99) (WE: G39C, M4 CQBR).

I am also adding some airgun pistols that I have not been able to find a supplier for here in Canada up until now, and I will also be adding them to the Canada Store shortly. (Umarex: Browning Buck Mark URX, XBG, Beretta 90two).

And of course the addition of some new accessories that I have been wanting to have listed in the Canada Store for some time now. (Daisy Zinc Coated BB's, Umarex CP99 - PPK - Rotary Magazines, Body Guard Mace Spray, Schrade Hand Cuffs)

So if your interested in any of these items then keep checking back, I will be adding them to the Canada Store as quick as I can - time permitting!

Some more updates for you, I received some more NcSTAR Accessories for my Canada Replica Airguns Store, some Red Dots, Scopes, Lasers, Tactical Lights, Rails, Bipods and some Vests, Slings and Holsters. I will be updating the Canada Store shortly with these very well priced items shortly so check back soon!

I also have a couple more blank guns that I will be conducting a Silent Auction on shortly: An EKOL Lady in Satin and an EKOL Special 99 in "White", which is more like a soft textured Nickel.

Lastly I also just picked up my first paintball pistol a RAM X50 and it is one I have been after for a while since I am a big Sig fan. It' basically an unlicensed Sig Sauer 226 that uses CO2 and chambers .43 caliber paintball and/or rubber balls. It is blowback and has a drop out 9 round metal magazine.

I have been asked many times to make some videos on some of the Accessories that I have in the Replica Airguns Store and that I use in some of my reviews. So I made this overview video of several my NcSTAR Accessories and also my BSA Red Dot that I sell a lot of.

Here are the Accessories that I cover in this YouTube Video Overview.

• NcSTAR - Pistol Laser Sight
• NcSTAR Compact Ultra Bright Green Laser with Switch
• NcSTAR Tactical Flashlight/Laser Combo
• Red Dot Scope BSA Multi-Purpose (RD30)
• NcSTAR - Tactical Fore-grip (with rail)
• NcSTAR - Quick Release Uni-Bipod

Buy Accessories in Canada   -   Buy Accessories in the US

I added another NcSTAR accessory to the Canada Replica Airguns Store, this one is a laser only but it's a green laser which creates an ultra bright beam superior in brightness to just the standard red lasers.

NcSTAR Compact Ultra Bright Green Laser with Switch

• The Compact Green laser is an ultra bright and powerful green laser in a much smaller package than was available previously.
• The Weaver/Picatinny style mount will fit virtually any Weaver and Picatinny rails, making it possible to fit onto a wide variety of firearms.
• With precise windage and elevation adjustments, you will have a: quick, powerful, and precise laser aiming devise.
• With the supplied remote pressure switch, it gives you the flexibility to mount the laser anywhere on your firearm and be able to activate the laser when you want to.
• The laser is manufactured from aircraft quality anodized aluminum.

Buy in the Canada Store  -  Buy simlar item in the US Store

We just added this new Tactical Light/Laser combo to our Canadian Replica Airguns store. If you're looking for a super high quality Weaver/Picatinny Style mount compact Tactical light and Laser combo, then the NcSTAR Tactical Flashlight/Laser Combo is a perfect choice. Yes this one is a bit more spendy but you get what you pay for, well that's what people tell me so I just pass the knowledge on to you ;)

NcSTAR Tactical Flashlight/Laser Combo

• 3 watt Flashlight puts out a White-Hot 120 Lumens
• Right below the flashlight is an integrated, Fully adjustable Red Laser.
• Small toggle switch in the rear allows you to illuminate the Flashlight and Laser separately, or Both at the same time
• A Quick Release Weaver/Picatinny Style Mounting System
• Constructed of Hard Anodized Aluminum and Reinforced Nylon, this unit is sure to handle even the toughest abuse!

Buy in the Canada Store  -  Buy simlar item in the US Store

Type: BB air pistol.
Manufacturer: Swiss Arms.
Model: Sig Sauer GSR 1911.
Materials: Mostly plastic construction with a few metal parts.
Weight: 1.3 pound.
Barrel: 4.5 inches, metal non-rifled.
Propulsion: CO2 x 1.
Action: Semi auto, double action.
Ammunition Type: 4.5mm BB's.
Ammunition Capacity: 20 round magazine.
FPS: 398 claimed - 450 real world.
Trigger Pull: The Swiss Arms Sig Sauer GSR 1911 has a double action trigger with about a medium weight pull to it. It does feel somewhat long as the break point seems to take a while to get to but once you master where it is, you can shoot this BB gun with surprising accuracy.
Accuracy: Once I sorted out the laser sight which took some MacGyvering (as explained in the video), this gun shot a nice tight pattern! For my quick test I shot free standing from 20 feet away and put 8 rounds into my target taking my time. I got about a 1.5 inch group which was very good and another note worth mentioning would be the Chronograph results I got, even though the Sig Sauer GSR 1911 CO2 BB pistol has a claimed fps of 398, mine came in consistently right around 450 fps!

Build Quality: The Swiss Arms GSR 1911 is mostly plastic and has very few actual moving parts, I'm personally not too worried about it, in fact the lack of moving parts means there is less to go wrong with it! I found the fit and finish to be good overall and as long as you are OK with the plastic this gun should be just fine for you. The only thing that would have been nice to see improved would be the laser and how it is adjusted. As is out of the box without modification, you will find that it easily moves out of aim. (I do explain how I fixed this problem in my video review)
Realism: The Swiss Arms Sig Sauer GSR 1911 in terms of size and looks, is about what the real gun would look like, with the exception of the trigger which is kind of a strange looking combination of triggers mashed into one. Of course being a moulded plastic airgun, it is much lighter then the real steel 1911 and has the telltale screw holes on the right hand side. The magazine ejector does work but the real steel safety, slide catch/release, hammer and grip safety are all moulded into the plastic so they do not function. On a good note the barrel muzzle is large like a real 45 caliber adding to the realism.
Purchased this gun from: The Replica Airguns Store.

Pros:

• Much better than advertised FPS and good CO2 usage. (up to 200 shots).
• Good accuracy once you get the laser working with the gun it adds to the ease of targeting. 
• Inexpensive and comes with lots of extra stuff that ads value. (Safety Glasses, Laser Sight, Starter BB's)
• Well hidden CO2 tab and 45 caliber sized muzzle.
• Full Sig Sauer licensing, decent replica in terms of looks
• Drop out metal magazines, compatible with other airguns (Umarex Beretta Elite II, S&W M&P)

Cons:

• Pretty much all plastic and not many working parts (less to go wrong)
• light weight makes it feel a bit on the cheap side.
• Trigger action is long and takes some getting used to.
• Laser sight needs to be MacGyvered a bit to make it stay sighted in (again watch my video on how to fix this).

Comments:
The Swiss Arms Sig Sauer GSR 1911 is pretty much what you would expect from a low cost airgun in terms of build quality, lots of plastic, with less working parts. This does not take away from the performance however as the GSR 1911 performed well in both accuracy and power. It also comes with the laser sight, safety glasses and starter BB's as an added bonus for about the same price as many entry level airguns on their own. If you like ultra realistic guns then this is on may not be for you, but if you want a good performer with the replica look and combined with a value package then I think you will be more than happy with the Swiss Arms Sig Sauer GSR 1911.

My YouTube Video Review for the Swiss Arms Sig Sauer GSR 1911 CO2 Air Pistol:

Buy Swiss Arms GSR 1911 in Canada

I wanted to get this video out to you a bit sooner but I have been really sick the past three days and so I have not had a lot of time to put this YouTube Video together. It's a pretty simple compilation of some photos and videos I took during my time walking around the 2012 SHOT Show in Las Vegas, not all of it is to do with airguns but most of it is. I even took a few touristy shots since it wasn't all work ;)

We now have some extra magazines available for our popular BB shooting Colt Special Combat! Not only odes the magazine hold the 20 rounds of BB's but also a CO2 cartridge. So if you already have a Colt Special Combat or you're thinking of getting one, be sure to pickup an extra magazine while you're at it!

Buy this Magazine in Canada

My recently acquired (Thanks UmarexUSA) Umaerx EBOS CO2 BB Machine Gun was just screaming for some add-ons and to be honest the first thing that I noticed was the open sights really needed upgrading. Luckily the rear sight is removable allowing you to mount just about any type of Red Dot Scope or sighting system you want, just make sure it is high enough to see up and over the front BB hopper.

I decided to go with an EOTech Styled Red-Green Dot Tactical Scope and I have to tell you this guns looks awesome with it installed!

I finished off the look with an unobtrusive Tactical Rail Mount Flashlight. All in all I think I spent about as much if not more on accessories for this gun as it is worth to buy :)

Buy BB Rifles in Canada

Buy BB Rifles in the US

Type: CO2 BB Shotgun.
Manufacturer: UmarexUSA.
Model: Walther SG9000.
Materials: Plastic (polymer) and some metal construction.
Weight: 2.35 pounds.
Barrel: 11.5 inches, metal non-rifled.
Propulsion: CO2 x 1 (88 gram).
Action: Semi auto, double action only.
Ammunition Type: 4.5mm BB's
Ammunition Capacity: 40 shot internal spring fed magazine.
FPS: 480 (single shot) - 250 (three shot burst).
Trigger Pull: The trigger pull on the Umarex Walther SG 9000 is in the mid range and is a bit long but once you get used to it you can fire off shots very quickly with little resistance. There really aren't any sticky spots in the trigger pull to speak of.

Accuracy: I shot this CO2 BB Shotgun at a target from the hip 20 feet away using my NcSTAR laser sight I installed on it in a free standing position, and it performed excellent getting a 1.5 inch grouping fairly centered on target. I also performed my accuracy test from 30 feet out in a semi-rested position using my 6x32 NcSTAR Scope and again I got a 1.5 inch grouping proving that a BB gun can show decent accuracy even from further out when setup properly. With my Chrony Chronograph testing I scored much higher then the factory claimed feet per second of 480fps in single shot mode and 250fps in three shot burst mode. I ended up getting an average 8 shot fps in single shot mode of 504fps and 309fps in three shot burst mode!
Build Quality: This is an almost all external polymer air gun with some metal components on the inside giving the Walther SG9000 a bit of a light to medium overall weight but once you add the large 88 gram CO2 cartridge and some accessories this gun can quickly gain a pound or two. All four accessory rails are metal along with the trigger. The fit and finish is very good on the SG9000 and the plastic quality seems very durable.

Realism: The Umarex Walther SG9000 is licensed by Walther but other then a similarity in the pistol grip it doesn't closely look like any specific Walther product or any specific Tactical shotgun for that matter. It does have a very tactical look and with a few accessories added you will have yourself a very persuasive looking shotgun on your hands.
Supplied by UmarexUSA - Can be purchased from: The Replica Airguns Store.

Pros:

• Inexpensive versatile BB shotgun.
• Nothing else really like it out there.
• Multiple shooting modes - singe and three shot burst.
• Uses 88 Gram CO2 so less stopping to change CO2.
• Very good FPS readings - above factory claims.
• Very accurate for a BB gun from close up and further out.
• Lots of rail locations for all kinds of accessories and different customizable looks.
• High capacity 40 round internal magazine.
• Totally fun!

Cons:

• The plastic exterior may put off some people looking for a heavier more metal gun.
• 88 Gram CO2 can be a bit pricy, not as cost effective as 12 gram CO2.
• Trigger pull is kind of long.
• You will need to purchase some sort of a sighting system for it as all you have is a rail on top.

Comments:
The Umarex Walther SG9000 is a really fun and very inexpensive CO2 BB shotgun. With its multiple shooting modes you have the option of power and accuracy in single shot mode or to simply blow stuff away in three shot burst mode. The Walther SG9000 is also very customizable allowing you to really make this Tactical BB shotgun your own by decking it out with just about any combination of add ons and accessories you like! I found this gun the most fun to shoot in three shot burst mode using my laser sight and literally knocking down everything I pointed at!

Watch my YouTube Video Review of the Umarex Walther SG9000 CO2 BB Shotgun:

Buy this gun in Canada   -   Buy this gun in the US

Mil3 sent me some more updated photos of his customized Cybergun Tanfoglio Witness 1911 now with the Sight Rail add on.

Buy this gun in Canada   -   Buy this gun in the US

Type: BB air pistol.

Manufacturer: Umarex.

Model: CP99 Compact Recon Version.

Materials: Metal slide, polymer frame.

Weight: 1.8 pounds.

Barrel: 5 inches, non-rifled.

Propulsion: CO2 x 1.

Action: Semi auto, blowback, single action only.

Ammunition Type: Steel BBs 4.5mm.

Ammunition Capacity: 18 rounds.

FPS: Up to 400.

Trigger Pull: The trigger pull on the Umarex CP99 Compact Recon is amazing, it is short and light making it one of the best action shooters I own. You can fire this gun accurately and fast all day long.

Accuracy: Great! The addition of the Green Dot Scope and slightly longer barrel on the CP99 Compact Recon version work amazingly well, this is one of the most consistent BB shooter I own getting under 2 inch groups at will from 20 feet out.

Build Quality: Excellent, this BB gun is made in Japan and uses metal where it is really needed like in the slide, slide release, safety, trigger, magazine release, magazine and most of the mechanical parts. It's well made, well finished and feels great in the hand.

Realism: This Replica BB gun has many of the same characteristics of the actual 9mm P99 Compact with the exception of having a longer handle and much different safety mechanism. Umarex has even changed the design a bit with the newer CP99 Compacts and made the ejection port cut out adding to the realism of this BB shooter.

Available at: the Replica Airguns Store.

Pros:

• Decent reproduction of the original Walther P99 Compact 9mm.

• Would make an excellent training gun as it has a similar size, weight, and feel to the actual Walther P99 Compact 9mm handgun.

• Blowback action is very firm adding to the realism of shooting this weapon.

• Really good FPS, accuracy and CO2 efficiency for a blowback BB air gun.

• The Recon version has a longer barrel adding a few more FPS to this already great air pistol.

• Amazing light and fast trigger pull making it a blast to shoot.

• Addition of the Sight Rail, Compensator and Green Dot scope really add to the esthetics and performance of this BB pistol.

Cons:

• The Sight Rail, Compensator and most of the Green Dot scope are plastic but this does not seem to effect the performance in any way.

• Safety lever seems out of place and takes away from the realism of this replica.

• Switch on the Green Dot Scope is silver making it stand out from the rest of the all black air gun.

Comments:

I already loved the CP99 Compact non-Recon version so I had very high expectations for this BB gun to be at least as good if not better and I was not disappointed! I was actual surprised at the improvements that the longer barrel and Green Dot Scope made not only in a much higher Feet Per Second rating (about 75 fps), but also the much improved accuracy in what was already a decent shooter. For the additional $40, you get the Sight Rail which allows you to add multiple accessories if required. You get the Green Dot Scope that noticeably improved the accuracy, and you also get the compensator which hides the extra long barrel for more FPS.

Buy BB Pistols in Canada

Buy BB Pistols in the US

I can't help but share some of the photos my happy viewers and customers send me and it seem like the hot item right now is the Cybergun Tanfoglio Witness 1911 CO2 BB Pistol yet again.

These latest photos are brought to you by Mil3 who added rubber grips and an accessory rail to his Tanfoglio Witness 1911. He said the rubber grips only needed some slight carving out on the back side to make them fit.

Buy this gun in Canada   -   Buy this gun in the US

 

I've had a few questions about replacing the gips on the Cybergun Tanfoglio Witness 1911 BB pistol and if it is possible to use standard 1911 wood grips? The answer is yes if you don't mind spending about 15-20 minutes removing just a bit of the wood material in a few spots on the 1911 Wood Grips

Here are the instruction thanks to one of my Customers and viewers Michel:

First of all the holes are in the right place thank god for that! A dremel is the ideal tool youll need, and the whole mod.

1. Mark out the material you want to remove.
2. Remove the material on bottom part of each grip with a dremel using a cicular sandpaper bit.
3. Repeat on other grip .On the top of the grip on the mag release side you might have to remove material to clear pin.

After on the other side of the mag release button make sure there is enough clearance for when you depress the button.

Here are a few pictures of the mod. Have fun:

Buy this gun in Canada   -   Buy this gun in the US

I've written a few posts on the Umarex Walther CP99 Compact. It was even featured in my very first YouTube video with my Umarex Walther PPK Full Auto BB Pistol. I do sell the CP99 Compact in my web-store but not the regular version, rather the Recon version. With the Recon version you get a few extras: The Sight Rail, a Red Dot Scope and a Compensator extension which I feel is better value over the standard version.

One thing that I noticed about the Compensator extension is that it's not just an add on simply for looks, this Recon version of the CP99 Compact has a longer barrel inside the compensator which should give the Recon version of the CP99 Compact a bit higher FPS. I will test this theory down the road with my Chrony Chronograph.

Enjoy the picture for now...

Buy this gun in Canada   -   Buy similar gun in the US

I dropped into my local Wholesale Sports Outdoor Outfitters today just to have a look around and walked out with a Champion .22 Caliber Bullet Trap. I figured the time had come to stop using cardboard boxes as my backstops, sure I have lots of backyard and so safety is not an issue but I think this new Champion Bullet Trap will work well for me!

One really nice feature about the Champion Bullet Trap is that it's rated to shoot right up to .22 caliber rimfire bullets (no magnums), so I can use my Henry .22 rimfire Lever action rifle with it too.

I am hoping that it will trap BB's OK, if they tend to get a little lively in it I may have to through a little cardboard in behind my target paper. 

The only trouble I encountered was getting it home as I brought my Kawasaki KLX250SF motorcycle with me on this trip but fortunately I had installed a rack on the back that the Champion Bullet Trap fit nicely on to.

One thing that can really add functionality but also give your gun that customized look is a Fore-grip and or a Bipod. I've added two Fore-grips for you to choose from and a really nice barrel mounted quick release Bipod.

• NcSTAR - Tactical Fore-grip (with Rail)
• NcSTAR - AR-15 Heavy Duty Fore-grip
• NcSTAR - Quick Release Uni-Bipod

NcSTAR - Tactical Fore-grip (with rail)

C$21.00

NcSTAR - AR-15 Heavy Duty Fore-grip

C$45.00

NcSTAR - Quick Release Uni-Bipod

C$45.00

You can always have some more holsters, everyones needs are different! Some like it discrete and some like to lay it all out for everyone to see. Now to go with our already existing Beretta 92FS Leather Belt Holster, Nylon Laser Holster and Nylon Shoulder Holster we have two more for you to choose from.

• Tactical Leg Holster - Black
• Tactical Gun Holster - Belt - Mag Holster - Black

Tactical Leg Holster - Black

C$29.00

Tactical Gun Holster - Belt - Mag Holster - Black

C$29.00