We just got in some Wood Grips for your Zoraki 914. Well technically they are plastic but they look like wood! We have limited supplies of these real imitation wood grain grips and once they are gone they may be gone for ever - or at least till we get some more. That is if we can get some more, it's really hard to say?
This may not be a big deal to most of you but if you happen to own or are thinking about getting a Webley Alecto in either a .177 caliber or .22 caliber pellet version, and you are a left handed shooter... then having the appropriate grips is going to make life just a little easier for you!
If you haven't taken a look at the Webley Alecto, maybe you should because it is a pretty amazing Pellet Pistol for target or pest control.
We get requests for accessories all the time and one of the more popular requests is for Red Dot Scopes! I will be expanding the Replica Airguns Store more frequently now and posting new arrivals as we add them to the Replica Airguns Store.
So to kick things off we have the BSA Multi-Purpose RD30 Red Dot Scope:
The BSA Multi-Purpose Sighting Systems are a wonderful light weight sight for close quarter and medium range targets. Light enough for small calibers plicking on the range, yet durable enough for larger calibers used by hunters and law enforcement departments. A great addition to your pistol or rifle!
This post is for any of you lucky North American Baikal Makarov owners out there, or for anyone thinking of getting a Baikal Makarov MP-654k.
We had some custom CO2 screws made up that fit the Baikal Makarov's BB-CO2 magazine perfectly and make the Makarov replica look virtually identical to the real steel. It's kind of a shame the Baikal Makarov didn't come this way from the factory but at least now you have the option of improving on an already great product.
I ran out of room for all my air guns and blank guns in my gun locker a while ago and so I have been on the lookout for a safe way to keep my air and blank guns secured and out of reach.
I have two little kids and I do make a point to keep an unloaded air gun around for them to check out and get used to, (so it's not such a big deal down the road for them). I have started to at least make them aware of what guns are and not to handle guns unless an adult is around and says it's OK. I want them to know early on that guns can be very dangerous when used the wrong way. But thats' another article on it's own!
<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->
I have been considering another gun locker or safe but they can be very expensive and are usually limited in size, especially if you're looking for an inexpensive one. In Canada, air guns and non-prohibited blank guns don't technically legally need to be locked in a gun safe or gun cabinet but personally I still feel the need to keep my air and blank guns locked up to some degree. So I thought, what about some sort of a lockable storage or utility cabinet?
I finally came across what I think is an excellent solution and it didn't cost me an arm and a leg! I went with an upright utility cabinet from Black & Decker (SpaceAir Collection). Mine is 70 inches tall, 15 inches deep, and 27 inches wide. It's made out of sturdy plastic and most importantly it's lockable!
I went with a pretty large utility cabinet as I have lots of air and blank guns but if you have a small to medium air and blank gun collection, you could always get the half size shorter version of this type of unit.
My Vimeo Video showing my Air and Blank Gun Storage solution:
Related Posts:
My scope mounting hardware came in today and I got right to work adding my new Aim 3x9x40 Rubber Scope and Foregrip to it. I wasn't planning on putting on the Foregrip, it just kind of happened and it looks good, so it may just stay on the CX4?
I ordered a Picitinny/Weaver Deluxe Riser Mount because I wasn't sure if the scope would clear the built in sites and I was thinking I wanted to mount the 3x9x40 Scope toward the rear but as it happened my high rise ring mounts where already the perfect hight and the Picitinny/Weaver Deluxe Riser Mount I ordered wasn't required!
Guess I'll have to shelf the Riser Mount for another project, I'm sure one day it will come in handy.
Some more pictures of the new setup:
I have been wanting to get a suitable scope for my Umarex CX4 Storm for a while but have been busy with the Holliday Season, today I made it out to Panther Paintball, a local paint ball store in my area to see what they had in stock. Sometimes I find paintball stores have a better air gun accessory selection then even many full fledged sporting goods stores that sell guns?
I was in luck because they had some good deals going on, one of which was a nice 3x9x40 Rubber Coated Scope made by AIM SPORT INC.
The only problem I had is that it did not have the right mounts for my CX4, it came with mounts for an M16 Carry Handle instead. So I added a Deluxe Riser Mount and some High Profile Picitinny/Weaver 30MM Rings - Problem solved!
I also have another rifle coming next week that I want to add a Foregrip and Red Dot Scope to, again Panther Paintbally had a 1x42 Red Dot Scope made by AIM SPORT INC. that was on sale and just what I was looking for.
Lastly, I found a Foregrip much like the one I have on my Steel Storm but without the Tactical Flashlight built in. I didn't really need the light on this new gun anyways.
Now I'm set for next week when I hope to get all the parts I need and of course my new rifle...
I just noticed that you can get Bulk Air-CO2 Adaptors on Amazon via a company called "Air Venturi". They have them for the Steel Storm, the Drozd and the Blackbird. The Blackbird one actually doubles as a stock mount for your CO2 or Bulk Air Tank.
