KJWORKS KP-09 CZ 75 Blowback Airsoft Pistol Table Top Review


Type: 6mm Plastic BB Airsoft Pistols.


Model: KP-09 (CZ 75 Replica)

Materials: Metal slide & frame.

Weight: 2.1 pounds (970 grams).

Barrel: Metalnon-rifled smooth bore.

Propulsion: 12 gram CO2.

Action: Blowback, Single and double action.

Ammunition Type: 6mm plastic Airsoft BB's.

Ammunition Capacity: 24 rounds.

FPS: 366+ fps.

Trigger Pull: The trigger pull on the KJWORKS KP-09 CZ 75 Airsoft Replica is surprisingly light in single action but incredibly sticky at first in double action, with that said you really will not be shooting very often in double action unless you happen to de-cock the gun for some reason, at least you have the ability to shoot with the hammer down in double action when required. In signal action it took me a bit to get used to the very light trigger pull as I was letting some shots go off early.

Accuracy: I shot the KJWORKS KP-09 from 20 feet out in semi rested position and got very satisfactory results. I was able to place 10 rounds under 2 inches almost getting a 1 inch group with the exception of one flyer. Shot placement was also well centered but just a bit high which could easily be corrected by adjusting my aim point just a bit down. The KJWORKS CZ 75 Airsoft Replica shot right around the 360 fps range while conducting my 5 shot average chrony testing which is right where this gun is supposed to be. I also got three full 24 round magazines worth of shots with a bit of CO2 left over for a partial mag, so this gun can easily get 75 shots out of a 12 gram CO2 - not bad at all for this style of full heavy blowback airsoft design.

Build Quality: I am extremely impressed with the build quality of pretty much all the KJWORKS Airsoft guns, the fit and finish is the best I have seen on any of my guns including my 4.5mm steel BB shooters. Even after shooting several magazines worth of BB's, the painted metal friction areas show very light wear which is not always the case with metal built blowback airguns. (there was some wear present within the ejection port but this is common even with real steel guns as metal on metal will wear down the finish). The tolerances between the moving parts like the slide and frame are very tight showing excellent workmanship and machining. 

Realism: The KJWORKS KP-09 6mm Airsoft pistol is a replica of the real steel CZ 75 and is a great looking and functioning copy. You will not find actual licensing on this version and the CO2 magazine does stick out a bit to accommodate the 12 gram CO2 but other than that this Airsoft pistol looks and works near exactly like the real mccoy and is full field strip-able. Even the safety operates just the same with safety available on half cock and full cock only.

Available in the:Replica Airguns Store


  • All metal pistol with good overall realistic weight to it.
  • Very crisp and firm full blowback operation.
  • Excellent fit and finish - best I have seen.
  • Excellent fps and CO2 efficiency (three plus full 24 round magazines)
  • Good accuracy and well centered on target.
  • Very believable working replica of the real steel CZ 75.
  • Fully field strip-able.


  • Does not have official CZ 75 licensing.
  • CO2 magazine is long to accommodate the 12 gram CO2.
  • Did get some finish wear in the ejection port area.


The KP-09 CZ 75 is another wonderful full blowback Airsoft pistol from KJWORKS. The CZ 75 is a classic semi auto pistol and deserves the attention to detail the KJWORKS version demonstrates. I found the CO2 usage to be very good on the KP-09 considering the rather high 360+ fps I was abel to get with it. Top this off with high marks in the accuracy department and you have a real winner here. So if you're looking for a quality Airsoft Replica of the classic CZ 75 that shoots straight and hard and looks and operates just like the real steel version then the KJWORKS KP-09 should just do the trick for you.

6mm, Airsoft, Blowback, CO2, Field Test, GBB, Pistol, Review, Semi Auto, YouTube Video CZ 75, KJWorks, KP-09