Type:Airsoft Gas Rifle. Manufacturer: KJWorks. Model: MK1 Carbine. Materials: Metal and plastic. Weight: 2.71 pounds (1.23 kg). Total Length: 33 inches (83.8cm). Barrel Length: 17 inches (43.2cm). Barrel: Metal non-rifled. Propulsion: Green Gas. Action: Semi auto double action only trigger. Hop-up: Adjustable metal Hop-up. Ammunition Type: 6mm plastic Airsoft BB's. Ammunition Capacity: 17 round full size drop out metal magazine. FPS: 450+.
Trigger Pull: The trigger pull on the KJWorks MK1 Carbine Green Gas Airsoft Rifle is double action only which will make it a bit longer and heavier than the real steal Ruger MK1 as it is Single Action Only. The trigger is smooth however and does have a nice satisfying click to it that sounds like a firing pin being release. The unfortunate part is that the real steel version has an amazing single action only trigger so the contrast between the Airsoft and 22LR version may make this gun not as practical is an optional training tool if you own the 22LR version.
Accuracy: This part of the review is yet to be determined as I have not done my Field Test or Shooting Test for this carbine, so stay posted for my official Field Shooting Test. For now you can watch my Ruger MK I Gas version Field Test Shooting Review to get an idea on how the KJWorks MK1 Carbine Green Gas Airsoft Rifle version should perform, as they are very similar with the Carbine version having a longer barrel and shoulder stock added to it with should increase the velocity and perhaps the accuracy a bit.
Build Quality: KJWorks as usual distributes quality Airguns, the fit and finish on the KJWorks MK1 Carbine Green Gas Airsoft Rifle is very good and there is good use of metal where it needs to be like with the upper receiver, the inner and outer barrel, the bolt and other internal mechanical parts, the trigger, the safety, the rear fully adjustable sight and the full size drop out metal magazine that holds the Gas and the Airsoft BB's.
Realism: The KJWorks MK1 Carbine Green Gas Airsoft Rifle is based on real steel Ruger MK1 and looks very close to it for the most part. There is no blowback operation or bolt operation so that means that only a double action trigger is possible, this is a bit unfortunate since the real Ruger MK1 has an absolutely beautiful smooth and light single action trigger. On the positive side you can field strip the KJWorks MK1 Carbine Green Gas Airsoft Rifle just like the real version but you will need to remove the rear stock that covers the area you need to get to to field strip it.
Pros:
If you own a real Ruger 22LR you will be use to the design layout.
Adjustable rear sight for windage and elevation.
Metal hop-up for backspin tuning.
Full size all metal drop out magazine that holds the Airsoft BB’s and gas.
Satisfying trigger sound, sounds like a real firing pin a bit, not clanky like many other Airguns.
Full Metal upper and barrel.
Metal rear sight, bolt, trigger and magazine.
Non blowback helps with velocity and gas efficiency.
Field strips like original MK Series (will need to remover rear stock).
Cons:
No blowback so longer DAO trigger not like the real steel Ruger MK 1.
Some reviewers claim the hop-up is hard to adjust.
May be a bit too powerful for use in close quarters Airsoft games.
Comments:
The KJWorks MK1 Carbine Green Gas Airsoft Rifle is really just a modified MK1 Pistol by adding a longer barrel and rear shoulder stock to the pistol grip. I guess it is a good use of an already popular pistol design to give us a light weight and somewhat compact Airsoft sniper rifle for Airsoft games as it does have a fairly high velocity claim. Because of the high 450+ fps I would not recommend it to anyone playing in close quarters as it could injure other players so keep that in mind. If you are looking for a lower cost and fairly compact Sniper Rifle for some outdoor shooting, then it might be just the right pick for that. I am hoping my upcoming Field Test Shooting Video showcases it nicely so keep checking back for that Review Video down the road a bit.
Type: Multi-Ammo Pistol. Distributer:Alies Airguns. Model:GEM. Materials: Mostly metal with some plastic build. Weight: Barrel dependent. Total Length: Barrel dependent 3.5 inches (89mm) with BB and Airsoft Barrels. Barrel: Barrel dependent 2 inches (51mm) with BB and Airsoft Barrels Propulsion: 8 or 12 gram CO2 (12 Gram CO2 required adaptor sold separately). Action: Break Barrel / Single shot. Ammunition Type: 4.5mm Steel BB's / 6mm Airsoft BB’s (Can also purchase .117 Pellet, .50 & .43 cal Paintball, 9mm Arrow Barrels) Ammunition Capacity: 1 round. FPS: up to 400 using 4.5mm Steel BB’s.
Trigger Pull: The Alias GEM Multi Ammo Mini CO2 Airgun is a true single action only pistol that requires the pulling back of the hammer for each shot. This does give it a very nice trigger action that is short to medium in length with an easy release. The makeup is about medium for a single action trigger with a bit of an unpredictable release as there is no point in time that you feel it breaking on you. This can be good or bad depending on how you like your triggers as it is hard to tel when ti will actually release but the smoothness makes it a good trigger overall in my opinion
Accuracy: I have not shot the Alias GEM Multi Ammo Mini CO2 Airgun at all so far as it requires 8 gram CO2 and so I am waiting on the 12 gram adaptor for it before I can even give it a quick try. I will be making a full Field test Review for it swapping between a bunch of barrel options to see how each barrel adn ammo type performs in terms of power adn accuracy so stay posted for that video down the road a bit.
Build Quality: Build quality for the Alias GEM Multi Ammo Mini CO2 Airgun is very good with an almost all metal build other than the front and back sights, the trigger, the safety adn the barrel release. I kind of wish these parts were also metal as the rest of the Airgun is so pristine! The weight of this pistol feels very dense as it is so small yet has a good weight. The fir and finishes is all very good with the chrome finish on most parts and even the inclusion of what I believe are real gem stones on each side of the grips. The mechanical parts are also smooth and precise.
Realism: As far as I know the Alias GEM Multi Ammo Mini CO2 Airgun is not a replica of any production real steel gun that I am aware of. It looks to me like some sort of futuristic compact laser pistol? In terms of gun shape and what we are use to in terms of what a gun is it checks most of the boxes but it is it’s own design for sure.
Pros:
Super compact design, probably the smallest Airgun available.
Multiple quick change barrel and ammo options.
Mostly all metal build, very high quality materials.
Nice smooth and light SAO trigger.
Able to also use 12 gram CO2 with optional adapter.
Comes in different colors (red or black).
Decent velocity up to 400 fps depending on ammo type.
Eye-catching chrome and gemstone detailing make it a collector's piece.
Cons:
Uses 8 grams CO2 standard, harder to get and more expensive.
Only a single shot, not an action shooter.
On the pricy side at over $300 Canadian.
Comments:
I have to say that the Alias GEM Multi Ammo Mini CO2 Airgun is not going to be for everyone as the price point is up there a bit for such a simple single action gun. That said it is super unique and the quality adn design is top notch. It may in fact be the smallest CO2 Airgun on the market adn you can literally put it in your front pocket easily. That combined with all the barrel and ammo options makes it super flexible if you plan on shooting a variety of different ammo types. Like I said in the video you may even be able to get away with buying it as a gift for your wife or girlfriend since it technically can be defined as being jewelry with the imbedded Gem stones in the grips. That may be a bit of a stretch unless she is also an Airgun fan.
Trigger Pull: The single action only trigger pull on the Umarex DSX 45 Spring BB Pistol is actually pretty decent. I would say it has a short to medium length with only a little bit of light take up and then an easy release that has no additional friction. You will have to cock the slide back for each shot which also cocks the hammer back allowing for a true single action trigger. The trigger its self is not like a traditional 1911 trigger in terms of looks but it does work well.
Accuracy: I have briefly shot the Umarex DSX 45 Spring BB Pistol so I could make some initial comments about its performance as it is a very new product to me. I will be making a full Field Test Shooting Video down the road but for now I can say it performed a lot better than I was expecting. The claimed 240 fps seems believable to me as shots at 20 feet hit the target with very little delay and even at 30 feet the delay was acceptable. In terms of accuracy, out of the box, for the most part hit the target at both 20 adn 30 feet very close to where I was aiming which is what you are hopping for.
Build Quality: Build quality for the Umarex DSX 45 Spring BB Pistol is also better than I would expect from a $29 Canadian almost all plastic BB Pistol. Everything felt nice and tight and fit and finish was good in general. There is even some metal where they could have gone with cheaper plastic, for example it has a metal trigger and slide catch release that is actually the safety. Of course the barrel and some other internal parts are going to be metal along with screws and such.
Realism: The Umarex DSX 45 Spring BB Pistol is a fairly believable replica of a more modern 1911 45 caliber semi auto pistol. Other than it being mostly plastic and much lower in weight, at around 1.25 pounds, the Umarex DSX 45 Spring BB Pistol does look the part with a working slide (for cocking the spring), a full size drop out magazines, a recessed barrel and a lot of detail in the finishing of it. I find it to be a little bit wider than a real 1911 would be in the grips and even the main frame and slide by just a bit.
Pros:
Super low coast to buy and shoot, no CO2 required, just need 4.5mm Steel BB’s and away you go.
Shoots pretty good, BB’s got to the target a lot faster than I was expecting them to and they shot where I was aiming in general.
Decent looking Replica of a modern 1911 Semi Auto Pistol.
Has a picatinny rail for adding accessories if you want to.
Single Action Trigger is pretty decent, a bit of take up but medium light weight to it.
Has a close to full size magazine that looks the part.
Magazine has a 200 round hopper capacity with 13 rounds being loaded into the feeder at a time.
Safety is worked into the slide catch release which adds to the realism in terms of looks.
Recessed barrel for added realism.
Actual working hammer you can de-cock if you want to for a bit of added safety.
Cons:
Almost all plastic other than some internal metal parts like the barrel and spring and some other stuff I am sure.
Takes a bit of effort to cock it which is required for each shot.
Sights are not adjustable and are all black with no white dots.
A bit beefy for smaller handed shooters.
Comments:
The Umarex DSX 45 Spring BB Pistol is a super inexpensive BB Pistol but don’t let that stop you from considering it to add to your collection. It has a lot going for it in my opinion. First off the price is super low to buy and to shoot, you only need a bunch of BB’s and you can shoot all day for a couple of bucks. It looks pretty believable as a 1911 Replica. The build quality and detail is a lot better than you should get for only $30 dollars here in Canada and when I quickly tried it out, it actually shot pretty hard for a spring BB Pistol and it seemed to hit the target right where I aimed even at 30 feet away. It even has a full size magazine that holds 200 rounds with a quick load 13 round spring feeding system to keep the fun going. Kind of a no brainer if you’re looking for a cheap and fun time.
This video was made right at the end of December 2024 but I am posting it in the new year so we will call it a late December video… That makes two Mystery Box Videos for December 2024 which means a lot of new products on my plate to review this new year. Hopefully I can get a bunch of them done before I head out to SHOT Show this year in a couple of weeks as I will have a lot of videos and interviews to post for SHOT Show as is always the case when I get back.
At least in this unboxing videos I can give you an idea of some of the new products we have in the Replica Airgun online Stores usually in both the Canada and the US Replica Airgun Stores. In this Unboxing Video I received 5 new products to show you. A Less Lethal Pistol and Spring Piston BB Pistol from Umarex, a Carbine Airsoft Rifle from KJWorks, a Multi-barrel super compact Airgun from Alias Airguns out of Canada, and Bug Exterminator from a company called Skell Inc. Here are some of the basics for each of them:
Type: CO2 Air Pistol. Manufacturer:Alias Airguns. Model: Gem. Caliber: Multi Barrel Comes with 4.5mm Steel BB adn 6mm Airsoft. Power Source: Single 8g CO2 Cartridge or 12 gram with adaptor. Magazine Capacity: Single shot. Buy the .50 Caliber Paintball Barrel Set: AA1002. Buy the Rocket Barrel Set: AA1003. Buy the 12 Gram CO2 Adaptor: AA1004.
Type: Spring Air BB Pistol. Manufacturer:Umarex. Model: DSX 45. Ammo Type:4.5mm Steel BBs. Power Source: Spring Air. Magazine Capacity: 13 Rounds (Rapid Load) with 200 Round Reservoir.
Type: Pump Action Bug Exterminator. Manufacturer: Skell Inc. Model: Bug-A-Salt 3.0. Ammo Type: table Salt. Power Source: Spring Air. Magazine Capacity: a bunch.
you need to cock the bow in order for the trigger to be engaged. The trigger mechanism basically just pushes the bow string up and over the lip of the rail releasing the bow, so there is a bit of friction and I would guess it is about 8-10 pounds maybe a bit less. There is no actual safety on the Steambow AR-6 Stinger II Tactical so you will have to practice appropriate finger control so as to not accidentally fire a bolt unintentionally.
Accuracy: I have not recorded my Field Test Shooting Video for the Steambow AR-6 Stinger II Tactical and so I am not sure what to expect. I have shot a similar bow, the Bear X Desire XL Crossbow so it should perform a lot like that one but without the auto loading bolt system. If you want, you can check that Field Test Shooting Video out here, I expect the Steambow AR-6 Stinger II Tactical to have perhaps slightly less power over the Bear X Desire XL as it is rated to have a 55 pound draw as compared to the 60 pounds of the Bear X Desire XL. In terms of accuracy I do not expect anything similar to a pellet or even BB rifles or pistol but I hope to get somewhere near a 6-8 inch grouping with the 6 bolts loaded in the internal magazine.
Build Quality: The Steambow AR-6 Stinger II Tactical is overall well made but does consist of a lot of plastic or polymer, that said it feels sturdy enough when holding it in the hand. The bow itself is fiberglass and the only real metal I can confirm is the cocking rail, mostly everything else other than the nuts, bolts, safety are some sort of plastic. Fit and finish is good. I am hoping the auto bolt loading system will perform well and be consistent but we will find out when I make my Field Test Shooting Video for it soon.
Realism: The Steambow AR-6 Stinger II Tactical is not a Replica pistol or rifle, it is a target bow that one could perhaps use of small game if you become proficient with shooting it. I do think this is a crossover product in terms of interest with people that are also interested in Airguns or target shooting. The other benefit is that it has a lot more power than a non regulated Airgun as the it uses nice heavy 142 grain bolts traveling at near 200 fps which gives an energy rating of around 12 foot pounds, the speed may be less than an Airgun but the energy is a lot higher. If raw power is what you are interested in, then this is your best option for something still compact and quiet if you do not have a firearms license or want to avoid that hassle and the legalities around regulated firearms.
Pros:
Light weight and compact.
More power than an airgun yet still quiet to shoot so can use discreetly just about anywhere with a good back stop setup.
Auto loading system for quick follow up shots.
Easy to draw the bow using the stock for leverage.
Top and bottom Picatinny rail mounting options for sights and accessories.
Fiber optic mid sight setup.
Ambidextrous bolt safety easy to engage and disengage.
6 bolts included to fully load the internal magazines.
180 fps (10ft/lbs).
Comes with standard fore grip.
5 portion AR compatible adjustable rear but stock.
Cons:
Fairly expensive.
Sights are not adjustable, mid sight is not as easy to sight in.
Will need a good backstop or will lose lots of bolts.
Takes a little bit of time to set it up but not too hard, just follow the steps in the manual.
Comments:
The Steambow AR-6 Stinger II Tactical is an interesting product, the autoloading system with built in 6 round magazines turns this from a simple target bow into a bit of an action shooter once you get the reloading down. As a potential pest control solution it for sure has the power as long as you can harness it by practicing to the point where you can get those 142 grain bolts on target and make a humane shot at the ranges you plan on using it for. Having quick follow up shots I feel is necessary just in case the first shot does not quite get the job done. If you don’t need external 10 round magazines or the upgraded accessories found on the Steambow M10 Tactical and want something a little more affordable than check the AR-6 Stinger out as it is very versatile as a compact Recurve Crossbow.
Trigger Pull: The trigger pull on the Steambow M10 Tactical Recurve Crossbow is a single action only trigger as you need to cock the bow in order for the trigger to be engaged. The trigger mechanism basically just pushes the bow string up and over the lip of the rail releasing the bow, so there is a bit of friction and I would guess it is about 8-10 pounds maybe a bit less. There is a metal bolt style safety just above where the trigger releases that is ambidextrous, push it forward for safe and back for fire.
Accuracy: I have not recorded my Field Test Shooting Video for the Steambow M10 Tactical Recurve Crossbow and so I am not sure what to expect so far. I have shot a similar bow, the Bear X Desire XL Crossbow so it should perform a lot like that one but without the auto loading bolt system. If you want, you can check that Field Test Shooting Video out, I expect the Steambow M10 Tactical Recurve Crossbow to have a bit more power over the Bear X Desire XL as it is rated to have a 75 pound draw as compared to the 60 pounds of the Bear X Desire XL. In terms of accuracy I do not expect anything similar to a pellet or even BB rifles or pistol but I hope to get somewhere near a 6-8 inch grouping with the 10 bolts.
Build Quality: The Steambow M10 Tactical Recurve Crossbow is well made but does consist of mostly plastic or polymer, that said it feels sturdy enough when holding it and is one of the heavier compact recurve Crossbow systems at 4 pounds. The bow itself is fiberglass and the only real metal I can confirm is the cocking rail, mostly everything else other than the nuts, bolts, safety and sling ring are some sort of plastic. Fit and finish is good. I am hoping the auto bolt loading system will perform well and be consistent but we will find out when I make my Field Test Shooting Video for it
Realism: The Steambow M10 Tactical Recurve Crossbow is not a Replica pistol or rifle, it is a target bow that one could perhaps use of small game if you become proficient with it. I do think there is a crossover product in terms of interest with people that are also interested in Airguns. The other benefit is that it has a lot more power than a non regulated Airgun as the it uses nice heavy 142 grain bolts traveling at near 200 fps which gives an energy rating of around 12 foot pounds. If raw power is what you are interested in, then this is your best option for something still compact and quiet if you do not have a firearms license or want to avoid that hassle and the legalities around it.
Pros:
Light weight and compact.
More power than an airgun yet still quiet to shoot so can use discreetly just about anywhere with a good back stop setup.
Auto loading system for quick follow up shots.
Easy to draw the bow using the stock for leverage.
Comes with bow pre-strung and ready to mount.
Lots of Picatinny rail mounting options for sights and accessories.
Fiber optic front sight with two rear sight options (grove and peep).
Ambidextrous bolt safety easy to engage and disengage.
20 bolts included to fully load both 10 round magazines.
190-200 fps (11-12ft/lbs).
Comes with upgraded fore grip.
6 portion AR compatible adjustable rear but stock with cheek adjustment.
Cons:
Fairly expensive.
Sights are not adjustable.
Will need a good backstop or will lose lots of bolts.
Takes a little bit of time to set it up but not too hard, just follow the steps in the manual.
Comments:
The Steambow M10 Tactical Recurve Crossbow is an interesting product, the autoloading system with 10 round magazines turns this from a simple target bow into a bit of an action shooter once you get the reloading down. As a potential pest control solution it for sure has the power as long as you can harness it by practicing to the point where you can get those 142 grain bolts on target and make a humane shot. Having quick follow up shots is necessary just in case the first shot does not quite get the job done. The upgraded add on accessories you get with the Steambow M10 Tactical Recurve Crossbow really give it a quilty feel and it is nice you not only have a fully adjustable AR compactly rear stock with a cheek rest but you have the option of a peep or grove rear sight to line up the fiber optic front sight. The price is on the high side but if you want the most ultimate Compact Recurve Crossbow auto loading system with maximum ammo then this is for sure the product for you.
I did my unboxing vide for both the Steambow AR-6 Stinger II Tactical and M10 Tactical already which is generally a preview of the products I am unboxing but with these types of compact crossbows, they generally need a bit of setup before they are complete and ready to view and use.
For that reason I wanted to make a quick combined Preview Video for Steambow AR-6 Stinger II Tactical and M10 Tactical Crossbows so you can see what they look like all put together, and what the main differences are between the two of them. This way you can figure out which one might be the best choice if you are in the market for a product like this.
Let’s go over the main specifications and differences to determine what you get with each one:
Distributed by: Steambow GmbH Austria.
Materials: Mostly plastic with some metal parts.
Weight: M10 4 pounds / AR-6 2.6 pounds.
Lengt: M10 24.2 inches / AR-6 22 inches.
Width: M10 17.5 inches / 17.5 inches.
Magazine Capacity: M10 10 bolts per external magazine / AR-6 6 bolts per internal magazine.
Another Mystery Box to share with everyone but this time I peaked a bit so it’s not as much of a mystery for me, but it will be for you. I was glad I peaked as the items inside where not the usual assortment and it was good I was able to get a bit of pre-intel on them before I jumped into this unboxing, as there was a lot to discover about each of the three items in the Mystery Box. I hope they appeal to some of you, I think they are very interesting and after checking them out, some of you may decide to add one or two of them to your collection.
The first two items I looked at are from an Austrian based company called Steambow. They are both compact crossbows that offer a unique reloading system with built in Magazines that hold either 6 or 10 rounds depending on the version you buy. The Steambow AR-6 Stinger II Tactical is the less expensive yet still “kind of expensive” version with a built in 6 round magazine While the AR Series Steambow M10 Tactical has an upper that accepts 10 round magazines you can preload. The Steambow AR-6 Stinger II Tactical comes with a 55 pound pre-strung bow that produces around 10 foot pounds of energy, while the Steambow M10 Tactical come with a 75 pound pre-strung bow which should produce close to 12 or more foot pounds of energy. Both incorporate fiber optic slights, lots of rail mounting options, AR style rear stocks which shoulder mount easy and quick cocking to make the most of the automatic bolt loading systems.
Another Archery based item also in this months Mystery Box was the Umarex AirJavelin FishR PCP based arrow launcher designed for anglers. It is intended to work with a fishing real of your choice and comes with a single retrievable barbed arrow, so a lot like bow fishing but with a PCP propulsion system. The Umarex AirJavelin FishR has a built in 4500 psi tank that is regulated to 800 psi and the arrow is a whopping 1250 grain to cut through the water with ease. The entire system is salt water resistant so you can use it in both fresh and salt water conditions. There are both picatinny and M-LOK mounting options for sights and accessories.
Stay posted for my Table Top and Field Testing Video Reviews coming shortly…
To start things off with my Field Test Shooting Video of the Umarex Marlin Lever Action Spring BB Rifle, I shoot 5 rounds through my Chronograph to see what the real world velocity is in fps. Umarex claims around 300 fps. I was able to average right around 274 fps so not far off of the claim. My lowest performing shot was 270 fps with the fastest shot hitting 278 fps, so all very close in velocity which is typical of a spring piston Airgun, this will help with consistent accuracy especially in terms of elevation.
When it comes to the accuracy, the Umarex Marlin Lever Action Spring BB Rifle did as well or perhaps even better than my other testing using previous Red Ryder type Air Rifles. If I through out one flyer I got, my 10 shot grouping was able to get around a 2 inch grouping that was overall well centered on the target, maybe juts a hair to the right. Even with the flyer the grouping spread out to a 3 inch grouping. I am pretty sure I could do better as this was the first time shooting this rifle. Keep in mind as I have to work the lever action for each shot that requires me to hold the rifle straight up and down in order for proper BB loading, this means I need to fully reset my hands on the sand bag and re-aim for each shot which will effect accuracy consistency a bit. Still a good result.
All in all I do really like the Umarex Marlin Lever Action Spring BB Rifle, mainly as it has a longer shoulder pull more suitable for adults. I feel adults get left out a bit in terms of target marketing with the standard Red Ryder which is a very compact BB Rifle with a short shoulder pull more suited for kids and youth shooters. This makes the Umarex Marlin Lever Action Spring BB Rifle more comfortable to shoot as an adult but will still work for youth and kids as is is not too large in size or heavy or even very hard to work the lever action. Now the whole family can really take part in the fun experience of shooting a Red Ryder type BB Rifle!
Type: Lever Action Rifle Manufacturer: Distributed by Umarex. Model:Marlin Cowboy Lever Action BB Rifle. Materials: Metal and plastic. Weight: 2.59 pounds (1.2kg). Total Length: 36.69 inches (93.2cm). Barrel: 16 inches (40.6cm) metal rifled. Propulsion: Spring. Action: Lever. Ammunition Type: 4.5mm steel BB’s. Ammunition Capacity: 650 in hopper. FPS: Claimed 300.
Trigger Pull: The trigger pull on Umarex Marlin Cowboy Lever Action BB Rifle is just about right for a rifle like this at 5 pounds with a medium to short pull length. I would say it is perfect for just about all shooter including novice shooters as it is not overly light, so as not to go off by accident and not too heavy so as to affect your accuracy. The Umarex Marlin Cowboy Lever Action BB Rifle trigger is considered a single action only trigger as it is only active after each cycle of the lever action which also is required to chamber a BB round.
Accuracy: My dedicated field test shooting video will be coming up over the next couple of weeks. So for now I have no idea what to expect in terms of velocity and accuracy from the Umarex Marlin Cowboy Lever Action BB Rifle, other than the claimed 300 fps which is what you can expect from the similar Red Ryder BB Rifle. Accuracy in general for a BB Rifle like this can be hit or miss. From past shooting experiences testing out the Red Ryder and first version of the Crosman Marlin Cowboy BB Rifle, they both shot decent from about 30 feet away, but I would have to say the Red Ryder did perform more consistently getting a tighter grouping than the Crosman Marlin Cowboy. Hopefully this Umarex newer version performs up to par.
Build Quality: The Umarex Marlin Cowboy Lever Action BB Rifle has overall good build quality with a metal barrel, receiver, rear sight and lever. The stock is plastic along with the front sight and the trigger but it does look and feel well made with all the mechanical parts feeling solid and tight. It does feel much heavier in the hand than the claimed 2.59 pounds. I would have preferred a metal trigger, not sure why Umarex went with a plastic trigger?
Realism: The Umarex Marlin Cowboy Lever Action BB Rifle is essentially styled after the Old West Lever Action Cowboy Rifle, and it has everything one would expect other than loading shells which is available in other CO2 poweredLever Action Air Rifles if you don’t mind paying a premium for one of them. The lever does not work the cycling of the bolt but rather it pre-cooks the internal spring that provides the air pressure and power. The lever does load a single 4.5mm Steel BB with each crank of the action. I do like that the Umarex Marlin Cowboy Lever Action BB Rifle has a full shoulder pull stock more suitable for larger shooters which does all add to the realism rather than having a super short rear stock.
Pros:
Easy to pump.
Fit and finish looks good for an inexpensive Airguns, seems very well made.
In terms of realism it does look like a classic old west lever action rifle for the most part.
Holds 650 BB’s in the hopper for quicker follow up shooting and virtually unlimited ammo.
Official Marlin licensing and branding via Umarex.
Rear peep sight is metal and is also adjustable for elevation.
Trigger pull is pretty decent, not too light but is medium-short and about 5 pounds.
Metal lever feels a lot better than as plastic one and will be more durable.
Shoulder pull length is much longer than a standard kids type Red Ryder BB Rifle.
Plastic stock has nice texturing that helps with grip and looks.
Cons:
No sight adjustments for windage.
Overall Power is lower than other CO2 BB and Pellet Rifles but still is adequate for it’s intended purpose.
Would have liked a metal front sight and trigger.
Comments:
The Umarex Marlin Cowboy Lever Action BB Rifle in my opinion is really built for adult shooters that want to join in on the fun with perhaps their kids or other youth shooters shooting something like a Red Ryder. The longer shoulder pull feels a lot more natural for larger shooters and I do feel like the Umarex Marlin Cowboy Lever Action BB Rifle just feels a bit more like a full size Lever Action Rifle. Performance wise, I dolt think we are going to see anything much different than what we are already getting from a standard Red Ryder or first generation Marlin Cowboy BB Rifle. That’s really OK since this type of rifle is made for good old fun, blasting pop cans and plastic army men with a friend. And with some time shooting one you can get pretty accurate with one of these BB rifles too.
This was a really fun Unboxing Video for me as I received something I feel a lot of Canadians might be really interested in protecting yourself in Canada is not a right especially if you use lethal force. So having a less lethal option is a really good idea.
Let’s get into what I found in this most recent Mystery Box in order of appearance…
The first item I unboxed was the KWC SP2022 CO2 NBB 4.5mm Steel BB Pistol. A pretty basic 4.5mm CO2 BB Pistol mostly made out of plastic but with a full size 21 round drop out metal magazine that does help a lot to add some much needed weight to this Airgun. It uses standard 12 gram CO2 with a claimed velocity of 450 fps.
Probably the most exciting item I pulled out of this months Mystery Box was the Gen2 Umarex P2P HDP 50 Rubber Ball purpose built Less-lethal solution for personal and family protection. Most of the similar Rubber ball Less-lethal Airguns I have tested generally do not pack enough punch to really be much of a deterrent in my opinion but the Gen2 Umarex P2P HDP 50 has a claimed 495 fps and when I tested it out after making this video it defiantly has some power. I would not want to be at the receiving end of this product especially in close proximity. The Gen2 Umarex P2P HDP 50 uses a traditional 12 gram CO2 and holds 6 rounds of rubber ball or powder ball, it does come with 10 of each to get you started.
Next I took a look at three KJWORKS Airsoft Pistols all of which came with CO2 Magazines, extension barrels and thread on tips. The KJWORKS KP-19, the KJWORKS M9A1 TBC, and the KJWORKS KP-13 TBC. As expected with KJWORKS Airsoft Guns, they looked really good and will be a joy to review and test out.
Last out of the Mystery Box was a new product from Umarex, a full sized Marlin Cowboy Lever Action BB Rifle in the style of the classic Red Ryder BB Gun but as mentioned in a larger size more suitable for an adult. Hey why do the kids get to have all the fun? The Umarex Marlin BB Rifle holds 650 rounds in its BB hopper and has a claimed fps pf 300. It also has an adjustable for elevation peep sight in the back with a metal lever and a Classic Faux Wood Finish.
Type:AEG Airsoft Rifles Manufacturer: G&G. Model:RK Beta AK Materials: Mostly metal/some plastic. Weight: 7.1 pounds (3.2 kg). Total Length: 28.5 inches (72.4 cm). Barrel: 9 inches (22.9 cm) barrel non-rifled. Propulsion: AEG. Action: Single action semi & full auto. Ammunition Type: 6mm plastic Airsoft BB’s. Ammunition Capacity: High cap 600 round magazine. FPS: 390 fps.
Trigger Pull: The trigger pull on the G&G RK Beta AK AEG Airsoft Rifle is short and light as it is basically a simple electric on/off switch that completes a circuit and tells the motor to turn, which activates the cycling of the spring piston. For this reason there is no real creep or feel of a release. When you get to a preset point in the trigger, the motor circuit is closed allowing for either semi or full auto, depending on your selector switch position at the time.
Accuracy: I will be making a dedicated Field Test Shooting Video for the G&G RK Beta AK AEG Airsoft Rifle to find out what the actual velocity is in fps. I will also test what kind of accuracy I can get shooting a paper target in both semi and full auto from 30 feet away. For now I have no idea what to expect but as this is most certainly not a cheap Airsoft AEG Rifle, I am hoping for good results to justify the higher price point.
Build Quality: The build quality of the G&G RK Beta AK AEG Airsoft Rifle is very good, G&G Airsoft Rifles in general are well built. You are going to find metal in most of this AEG Airsoft Rifle including the receiver, dust cover, trigger guard, trigger, selector switch, barrel, front and rear sights and the magazine. The only plastic to be found will be in the pistol grip, rear stock and 3 of the picatinny rails. Fit and finish is very good but the stock and pistol grip material does seem to show scratches really easily.
Realism: The G&G RK Beta AK AEG Airsoft Rifle is a 1 to 1 scale Airsoft reproduction of the AK 47/74 in a compact modernized version. I don’t believe it is based on exactly one specific brand or type of AK 47 or AK 74, but is more or less a stylized version designed and built by G&G. The G&G RK Beta AK AEG Airsoft Rifle does have a lot of metal and weight to it adding to the realism and most of the mechanical parts work similar to a real steel version of an AK 47/74. G&G has added a bit of a bolt cycle motion with a motor that actuates it to some degree but this is not like the look and feel of a real internal bolt from an actual AK 47/74. Still a nice touch.
Pros:
Lots of metal in construction where you need it with good overall weight and feel.
6 rail attachment options up front for lots of mounting positions.
Left side option to attach an additional AK style sight mount.
Adjustable front sight for elevation.
Nice and compact for easy maneuverability.
Rear stock has lots of room for battery sizes and options.
Dust cover comes off for easy access to internals.
G&G high quality build.
Comes with sling mounting options.
Super easy hopup adjustment slider.
Nice high capacity 600 round metal magazine.
No orange tip.
Cons:
Rear sight is all but useless.
Stock and grip scratch really easily.
Priced on the higher side.
Comments:
The G&G RK Beta AK AEG Airsoft Rifle may be priced a bit on the high side for some people but it is a solid AEG Airsoft Rifle and it seems there are not as many AK options out there so it is nice to have an offering from G&G. I like the almost full metal construction and I find the modernized styling and compact size to be appealing and would make it a great option for CQB Airsoft games. I am not sure what is going on with the rear site, as it looks like it is a sight, but does not have the sight grove in it? Maybe I am missing something here but other than opting to put a red dot way up front, your only other option is to put an AK side rail and mount a sight on the rear just above the metal dust cover. I am hoping when I make my Field Test Shooting Video for the G&G RK Beta AK AEG Airsoft Rifle, it performs well for me to justify the higher price point.
My Vimeo Table Top Review for the G&G RK Beta AK AEG Airsoft Rifle:
In this Indoor Field Test Shooting Video, I put the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol through my usual performance shooting test by first finding out what the velocity is by shooting 5 rounds through my Chronograph using a fresh CO2 along with .20 gram Airsoft BB’s. I follow this up with a 10 round accuracy test, again using .20 gram Airsoft BB’s and shooting at a paper target setup 30 feet down range, while seated on a stool in the back with my hands rested on a sand bag up front. This generally works pretty well and helps me get the most out the gun I am testing. If you are also interested in details and specifications than make sure to watch my Table Top Video I already made for the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol.
So how did the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol do in my testing? Not bad! Starting with the velocity fps test I shot 5 rounds through my chronograph with a brand new 12 gram CO2 cartridge and while EMG claims around 400 fps, I only averaged 321 fps with my fastest shot hitting 323 fps and my slowest shot hitting 318. So relatively close in terms of fps but not close to the 400 claimed fps. Totally fine for Airsoft games, perhaps in super hot temperatures, it can do better but in standard room temperatures this is what I got.
Next up I tested out the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol’s accuracy from 30 feet away and put 10 rounds down range as best as I was able to do with my slightly aging eyes. I was happy with the results with most of the rounds staying within about 2 inches of each other and just slightly to the right of the bullseye, but pretty much perfect in terms of elevation. There where a couple of rounds that came outside of the base 2 inch grouping, which increased the grouping to about 3 inches total.
I am a huge 1911 fan and so a 2011 design only tuns up the dial that much more. The EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol performed without a glitch for me and I love the extra heft and snappy blowback action along with the crips light and short single action 1911 trigger. I was a bit surprised by the lower 323 fps velocity, but to be honest this is more than a capable velocity for a combat close range Airsoft Pistol. The EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol is a real looker for sure, it just needs that eye soar of an orange tip removed to perfect its look. If you like the look and feel of a 1911/2011 in your hand, and if stainless steel is your color of choice, then I would say go for this one.
Type: GBB Airsoft Rifle Manufacturer:Umarex / KWA Model:HK 416 A4 Materials: Mostly all metal. Weight: 7.75 pounds (3.5 kg). Total Length: 31.1-34.4 inches (79-88cm). Barrel: 15.4 inches (39cm) non rifled. Propulsion: Gas Blowback. Action: Single action semi & full auto. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity:30 round magazines. FPS: 400 fps.
Trigger Pull: The trigger pull on the Umarex HK 416 A4 GBB Airsoft Rifle is typical of a single action only trigger found on the AR platform. It has a very slight take up with just a little bit of resistance part way, and then a predictable light break. The reset has a noticeable click to it and it is also very short allowing for very fast semi auto shooting. Of course you can always put it in full auto and let her rip, but you will have to restrain yourself since there are only 30 rounds in the magazine like you would find in a standard AR.
Accuracy: Like most of my Table Top Videos, they are made prior to shooting the gun I am reviewing, so we are all going to have to wait until I make my official Field Test Shooting Video for the Umarex HK 416 A4 GBB Airsoft Rifle. Where I will be testing out the velocity in fps using my Chronograph, and I will also shoot the Umarex HK 416 A4 in both semi auto and full auto to see how tight of groupings I can get at least at 30 feet away. I fully expect the Umarex HK 416 A4 GBB Airsoft Rifle to perform well as this is a very high quality product made by KWA.
Build Quality: The Build quality on the Umarex HK 416 A4 GBB Airsoft Rifle is outstanding with metal everywhere you would find it on a real steel AR. Of course the rear adjustable stock is plastic. Because of all the metal front to back, the Umarex HK 416 A4 is on the heavy side at 7.75 pounds, so packing it around all day may be a bit tiring but well worth the joy and pride when holding it. Fit and finish is also excellent, you will pay more for this GBB Airsoft Rifle but the material are nothing but quality.
Realism: The main thing you get from a GBB Airsoft Rifle over an AEG Airsoft Rifle, is not just quality components and build materials, but the user experience which is so much more realistic than shooting an AEG. The Umarex HK 416 A4 GBB Airsoft Rifle just feels so real in weight, how the controls all work, the full cycling of the bolt with a nice heavy and snappy blowback recoil on your shoulder. Even the way the buffer tube spring rings after each shot just makes this GBB Airsoft Rifle a joy to shot and experience. Sure it only holds 30 rounds per mag and shot consistency will vary depending on your shooting environment as all gas guns can be temperamental in colder weather. That said, a real AR does not hold 500 rounds in a mag and they can also be a bit finicky on the battle field.
Pros:
It’s GBB, love the realism of GBB Airsoft Rifles, it doesn’t get any more fun.
Tons of metal all over this rifle weighing in at almost 8 pounds.
Lots of accessory mounting options with the Precision CNC machined Quad Picatinny top side and bottom rails.
Full adjustable metal pop up sights.
H&K Lisence via Umarex.
6 position adjustable AR compatible rear stock.
Trigger feel is awesome, feels like a real steel AR trigger, you can’t even get close with an AEG.
Ambidextrous selector switches for left and right handers.
The threaded barrel can attach a silencer or other flash hidders.
All parts work just like the real steel version.
Can filed strip just like a real steel AR.
Cons:
Low magazine capacity as compared to an AEG.
Will be subject to cold weather conditions and cool down.
Very expensive to have and own such realism.
Comments:
The Umarex Umarex HK 416 A4 GBB Airsoft Rifle is for sure not going to be for everyone as it is with out a doubt a very expensive Gas Blowback Airsoft Rifle. It may not even be your best option out on the Airsoft Field, as more than likely you are going to get out gunned by everyone else using an AEG with their 500 round magazines and endless torrent of BB’s coming at you. If you just want the most realistic Airsoft Experience, than look no further than the Umarex HK 416 A4 GBB Airsoft Rifle, as it does not get more realistic than this and if you want to replicate your real steel AR perhaps for training and practice sessions, than there is no way you can beet the Umarex HK 416 A4. For those with deep wallets that want the ultimate and most realistic AR you can get, you can’t go wrong with the Umarex HK 416 A4 GBB Airsoft Rifle.
My Vimeo Table Top Review for the Umarex HK 416 A4 GBB Airsoft Rifle:
Here we go with another unboxing video this month, and this is a big box, so no doubt the mystery items are going to be big too! As always with new products, I will be following up with dedicated Table Top and Field Test Videos for each of them so make sure to check down the road for those videos for a lot more information and actual performance results…
Don’t look below if you want to just watch the video and be surprises by what’s inside the mystery box but if you want a quick peak before hand then checkout the basic specs below for all three new items I will be reviewing soon.
Type: GBB Airsoft Pistol. Manufacturer: Distributed by EMG. Model:SAI 2011 DS 4.3. Materials: Mostly metal (Aluminum) and plastic. Weight: 1.94 pounds (878 grams). Total Length: 8.25 inches (210mm). Barrel: 4 inches (102mm) metal rifled. Propulsion: CO2 x1. Action: Semi auto Blowback, SAO trigger. Ammunition Type: 6mm Airsoft BB’s. Ammunition Capacity: 30+1. FPS: Claimed 380-430.
Trigger Pull: The trigger pull on the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol like what you would find on a traditional 1911 style pistol so it is Single Action Only and is nice and short and light in weight. Being a single action pistol for your first shot you will need to pull back the slide to chamber a round into the barrel which will also cock the hammer for you. the blowback action will cycle the slide for you from that point on automating the action.
Accuracy: I have not made my Field test Shooting Video or even tested out the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol yet or even shot it at all so I can not comment on the performance other than the claimed velocity of (380-430 fps) which does seem a bit high to me? My plan is to have this info available next week when I make my Field test Shooting Video so stay posted of that video coming out shortly…
Build Quality: The EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol is a well made Airsoft Pistol with quality materials throughout. You will find a machined aluminum slide an aluminum frame and a full metal drop out magazine. The barrel is Titanium Nitride Coated and the only real plastic parts I could find would be the grips, the gas tube and the hop-up wheel. The stainless coating on this Airsoft pistol looks fairly thick and so should stand up over time with less wear showing.
Realism: The EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol to me is not a true 2011 design as it does not have the once piece grip/trigger guard design found in 2011 pistols. It is double stack so that fits with the naming convention but I would say it is more like a combination of the Salient Arms SAI Red and SAI Red H. It does check all the boxes for realism in terms of function, looks and feel with all the working parts you expect on a Replica Airsoft Pistol including being able to fully field strip it.
Pros:
Superior Performance and 1:1 Scale Functionality.
Machined Aluminum Alloy Frame and Slide.
Rugged Reliability without sacrificing Weight.
Officially licensed by Salient Arms International.
Front and Rear Combat Style Sights with integrated Forward Fiber Optic.
Machined Anti-Glare Slide Top.
Ambidextrous Safety and Squared Trigger.
Titanium Nitride Style SAI Barrel for added durability.
On-Frame Integrated Accessory Rail.
Skeletonized trigger and hammer.
Options of both Green Gas and CO2 Magazines.
Deep Engraving with Real Steel Training Weapon Grade External Finish, Look, and Feel.
Cons:
Has orange barrel tip. But can be removed with some work.
No white dot or fiber optics on rear sight.
Not really a True 2011 in design as the name suggests.
Comments:
I am a huge 1911/2011 fan and so the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol really appeals to me. I like the compact design of the EMG SAI 2011 DS 4.3 yet it has a nice high capacity double stack magazine that gives this Airsoft Pistol a bit more girth in the hands which for me is OK as I have pretty large hands. I like that you have the option of shooting CO2 or Green Gas depending on what magazine you are using. This version comes with a CO2 Magazine, but you can purchase a green gas magazine if you prefer using gas over CO2. I like the modern look with the gold barrel and skeletonized trigger and hammer. The price is on the higher side but sometimes you have to pay a little bit more to get the additional quality and to have a gun that really stands out.
In this Mystery Boxing Video I get to take a look at 4 new Airgun Products and give you my first impressions along with a few specifications about each of them but not in a lot of details as I have not had an opportunity to research any of them as this my first time seeing them.
First out of the Mystery box is a new Umarex T4E .43 Caliber CO2 Blowback Paintball Pistol with Walther licensing called the Umarex T4E PDP. I have reviewed similar styled T4E .43 caliber CO2 Blowback Pistols in the past and this one should perform and function similarly.
The next Airgun I pulled out out of the box was the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol, a really nice 1911 styled Airsoft Pistol with a stainless finish and gold barrel with a CO2 Magazine. This one looks and feels really nice.
Staying with the pistols that came in this Mystery Box, I got my first look at the Umarex Markpoint .177 Caliber Break Barrel Pellet Pistol that has a bit of a utilitarian look and feel to it. This one is the longer barrel version and has a claimed fps of 395 using alloy pellets so we will see what it can get with more traditional lead pellets when I make my Field Test Video for it down the road a bit.
The last item out of the Mystery Box was another Umarex product, a fun CO2 BB Rifle with H&K licensing called the HK416. This semi auto and 6 round Burst internal Blowback CO2 BB Rifle is a lot like the Steel Storm and Steel Strike from Umarex but a little bit larger I would say and with H&K Licensing so more of a true Replica Airgun.
I will be making full Table Top and Field Test Videos for all of these items shortly so keep an eye out for those videos but for now you can at least get an idea what these Airgun Products will offer.
Type:AEG Airsoft Rifles Manufacturer:Umarex. Model:Elite Force M4 CFRX Materials: Mostly plastic/some metal. Weight: 5.2 pounds (2360 grams). Total Length: 32.4-35.4 inches (820-900mm). Barrel: 16.1 inch (410mm) barrel non-rifled. Propulsion: AEG. Action: Single action semi & full auto. Ammunition Type: 6mm plastic Airsoft BB’s (Eye Trace compatible). Ammunition Capacity: Mid/High cap 340 round magazine. FPS: 370-400 fps.
Trigger Pull: The trigger pull on the Umarex Elite Force M4 CFRX Eye Trace AEG Airsoft Rifle is fairly short and light as it is basically a simple on and off switch as it is not mechanical but rather electrical. For this reason there is no real creep or feel of a release. When you get to a point in the trigger you close a circuit that activates the electric motor cycling the spring shooting in either semi or full auto depending on your selector switch position at the time.
Accuracy: At this time I have not made my Field Test Shooting Video or even shot the Umarex Elite Force M4 CFRX Eye Trace AEG Airsoft Rifle, I am planning to make a video for this rifle at the end of this week if all goes as planned. I do not have any of the “Eye Trace” Airsoft Ammo to show how this works and looks but I will be able to do my traditional accuracy and velocity testing here in the Replica Airguns Indoor Sea Can Airgun Range. When I do get access to some of the Eye Trace Airsoft Ammo I will make a short video most likely in a lower light situation to show how it looks.
Build Quality: The Umarex Elite Force M4 CFRX Eye Trace AEG Airsoft Rifle does have a lot of plastic in the build including the upper and lower receiver, hand guard, rear stock, front and rear sights, grips and flash hider but as expected there are metal part where they are required as in the inner and outer barrel, magazine, buffer tube, trigger, selector switch, magazine release, charging handle, dust cover and of course many internal parts. It does have a decent weight to it being a fairly long AR and so it feels solid enough. I would have liked to have seen metal sights and perhaps a metal receiver since it is not a cheap or inexpensive AEG Airsoft Rifle.
Realism: The Umarex Elite Force M4 CFRX Eye Trace AEG Airsoft Rifle is based on the M4/M16 platform of course in a modern version with all the tactical additions. It looks and feels the part for sure with lots of working parts including the safety, selector switch, charging handle, dust cover, adjustable rear stock, pop-up front and rear sights as you would expect. Most of the hardware should be interchangeable with a real steel AR if you want to personalize the look of it. The addition of the Tracer element will add to the realism when shooting it in low light situations, but so far I have not tested it as I do not have any Eye Trace Ammo on hand.
Pros:
Eye Trace System unique and great in low light situations.
Lots of accessory mounting options with Picatinny top rail and side adb bottom M-LOK.
Full adjustable Pop-up sights.
Pre-installed MOSFET for improved electronic performance.
Ver 2 Full Metal, fully upgradeable gearbox.
6 position adjustable AR compatible type rear stock.
I like the two tone black and tan finish.
Has the Elite Force Branding from Umarex.
Easy to get at adjustable Hop-up.
Cons:
Plastic receiver and orange tip.
Battery options limited due nunchuck compatible space.
Pop-up removable sights are plastic.
Comments:
Umarex introduced the “Eye Trace” line of Airsoft Rifles at SHOT Show this year and I have been somewhat eagerly awaiting getting my hands on one to try this new system out, but unfortunately we do not have any of the Eye Trace Airsoft Ammo to do that with. I am not sure if Umarex is low on supply or perhaps it was missed in the order? Either way I will be testing out the new Eye Trace Airsoft Ammo when I get my hands on some. in the future. Just to be clear on how this works, the Eye Trace Ammo is florescent and these New Eye Trace Airsoft Rifles have a blue light you can turn on or off that activated the florescent Airsoft Rounds illuminating them to look like tracer rounds coming out of your barrel. The new Eye Trace Airsoft Rifles work just like a standard AEG Airsoft Rifle when using normal Airsoft BB’s, so I can test the Umarex Elite Force M4 CFRX Eye Trace AEG Airsoft Rifle as I always do so stay posted for my Official Field Test Shooting Video for it coming out very soon.
My Vimeo Table Top Review for the Umarex Elite Force M4 CFRX Eye Trace AEG Airsoft Rifle:
Here is Bonus Video Five in my series of Full Auto Fun videos I make each summer where I pick a few Full Auto Airguns and record some fun outside shooting with them. In this years Full Auto Fun Video series I do a bit of a walk around on my property and shoot a bunch of water filled pop cans. Maybe this doesn’t sound super exciting but I do use some really creative camera angles to capture it all which makes it lot more interesting to watch for sure!
In this Fifth Bonus Full Auto Fun Video I bring out a past Full Auto Fun Airgun that I just couldn’t resist takin out for some full auto fun once again. The WE AK74UN Gas Blowback Full Auto Airsoft Rifle has got to be one of the hardest blowback Airguns I have shot, I would say even a bit more blowback feel than the KWA Mini UZI! The WE AK74UN Gas Blowback Full Auto Airsoft Rifle also does a great job of keeping Airsoft BB’s on target even in full auto with all that recoil as you will see in this video as I dial it in part way through my walk about. Unfortunately we do not sell anything like this anymore at least in Airsoft, the closest thing to it is the Crosman AK1 Blowback CO2 Full Auto BB Rifle which is still a lot of fun with a bit less recoil but a higher rate of fire.
In this Field Test Shooting Video, I test out the Specna Arms Core SA-J73 AEG Airsoft Rifle in my Indoor Replica Airguns Sea Can Shotgun Range to see what the velocity/fps is and what the accuracy is like shooting .20 gram Airsoft BB’s through my Chronograph. I shoot in both semi and full auto at a paper target setup 30 feet down range. If you are more interested in information like details and specifications for the Specna Arms Core SA-J73 AEG Airsoft Rifle, then make sure to watch my Table Top Video I already made that also includes some nice close up video for you to check out…
First up I loaded up a mag of .20 gram Airsoft BB’s and proceeded to shoot 5 rounds through my Chronograph to get a baseline average. Specna Arms claims around 370-380 fps using the preinstalled internal spring setup. I averaged 382 fps with my slowest shot recording 379 fps and my fastest shot hitting 383 fps. All of them really close in terms of velocity and right on the mark of the claimed 370-380 fps using .20 gram Airsoft BB’s.
With the Velocity Test in the bag, I moved on to my Accuracy Test for the Specna Arms Core SA-J73 AEG Airsoft Rifle where I first shot 10 rounds in semi auto to see how tight of a grouping I could get, and then I also finished up the rest of the partially full magazine in full auto to see if that grouping opened up a bit with a lot more rounds and a bit of full auto rocking around. For my 10 shot semi auto grouping I did get around a 1 to 1.5 inch spread, and notably all 10 shots hit the bullseye with no sight adjustments out of the box. Unleashing the Specna Arms Core SA-J73 in full auto, the group did spread out just a little bit to around 3 inches or so, but again right on top of the bullseye for the most part. Very impressive results for sure!
Overall I am super impressed with the Specna Arms Core SA-J73 AEG Airsoft Rifle! At around $200 Canadian you get a well made decent quality AEG Airsoft Rifle that not only looks and feels really good, but performs as good if not better than some much more expensive AEG Airsoft Rifles out there. All you really need to get on top of this purchase would be a decent charger and battery setup along with some quality Airsoft BB’s and then you are ready to go. No need for any more upgrades at least not right away. So if you are looking for an affordable AK type AEG Airsoft Rifle with no real compromises to speak of, look no further than the Specna Arms Core SA-J73 AEG Airsoft Rifle. Not much else will be a better option in this price range.
