I had the chance to take the KJWorks KP-18 TBC CO2 Full Blowback Airsoft Pistol out for some testing today in the Replica Airguns Indoor Shooting Range to see how it performs. I’ve already done my close-up tabletop breakdown (specs, build, pros/cons), so if you want the close-up visuals adn details, go check that video out. For this session I concentrated solely on performance, a quick 5-shot chronograph run to record velocity and a 10-round semi auto group at 30 feet followed by the rest of the mag in full auto to get a practical feel for out-of-the-box accuracy.
For the chronograph test I used a fresh 12-gram CO2 capsule with stand.25 gram Airsoft BBs, and the temperature was about 20°C. Five shots with .25 gram Airsoft BBs registered 301, 301, 291, 285, and 281 fps, averaging out to 292 fps. That’s within the expected range for a full-blowback CO2 pistol running heavier .25 gram Airsoft BBs, you’d see higher velocities with lighter .20 gram rounds, and it’s plenty adequate for Airsoft games and target work plinking.
On the accuracy side I fired from 30 feet using a semi-rested shooting position (hands braced on a sandbag while seated). In semi-auto the KJWorks KP-18 TBC CO2 Full Blowback Airsoft Pistol shot just slightly low and a touch left, producing roughly a 2-inch group with most rounds clustered reasonably well. Switch to full-auto, however, and it becomes almost impossible to keep on target, the pistol tended to climb high and stray to the right, putting most shots completely off the target. That full-auto behavior makes it poor for controlled rapid-fire engagement, but in semi-auto it’s much more manageable.
All told, the KJWorks KP-18 TBC CO2 Full Blowback Airsoft Pistol is a strong option if you like the Glock style or already own (or plan to own) a real-steel Glock. physically and mechanically it shares a very similar feel. KJWorks has a reputation for high-quality, well-made products, and this pistol is another solid example. If you don’t need official Glock licensing but want a Glock-based Airsoft pistol, the KP-18 is a great choice, especially for shooters who value realism and good build quality in a reasonably priced package.
For the chronograph test I used a fresh 12-gram CO2 capsule with standard BBs, and the temperature was about 20°C. Five shots with .25 gram Airsoft BB’s registered 307, 301, 306, 304, and 308 fps, which averages out to 305 fps. That’s right in the expected range for a non-blowback CO2 Airsoft Pistol of this type using heavier .25 gram Airsoft BBs, expect higher velocities with lesser weight .20 gram Airsoft BBs. For sure enough power for backyard plinking and casual target work.
On the accuracy side I fired from 30 feet out, semi-rested (hands braced on a sandbag while seated on a stool in the back). The Ruger P345 CO2 NBB Airsoft Pistol shot fairly well centered, but landed a touch left and slightly low, overall grouping was around 2 inches with only one flyer, which, oddly enough, was dead center in the bullseye when I checked the target later. The sights are fixed out of the box, so you’ll want to account for that small left/low bias when aiming or consider a simple sight/laser addition if you need a perfect zero.
All told, the Umarex Ruger P345 CO2 NBB Airsoft Pistol would make a decent entry-level Airsoft pistol. You can additionally offset cost by purchasing inexpensive stick magazines rather than investing in pricier full-size mags that come with other more elaborate Airsoft Guns. It has a good, reassuring weight for an external plastic Airgun, which helps it feel well-balanced in the hand. For someone after an affordable, reliable sidearm for plinking or casual training, the P345 is a solid option.
I took the Daisy 415 Powerline CO2 BB Pistol out for some testing today to see how it performs in the Replica Airguns Indoor Airgun Range. I’ve already done a close-up tabletop breakdown before (specs, build, pros/cons), so if you want the specifications and details along with more closeup video then go check that Table Top Review out. For this performance session, I concentrated solely on power and accuracy, a quick chronograph run to record velocity and a 10-round group at 30 feet to get a practical feel for out of the box accuracy.
For the chronograph test I used a fresh 12-gram CO2 capsule with standard BBs and the temperature was about 20°C. Five shots registered 475, 455, 466, 462, and 471 fps, which averages out to 466 fps. That’s a healthy number for a CO2 pistol in this class, plenty of power for backyard plinking. I have a feeling it will go through CO2 pretty quickly as it is really loud meaning there is a lot of CO2 being released with each shot.
On the accuracy side I fired from 30 feet, using a semi-rested position (hands braced on a sandbag while seated in the back). The Daisy 415 Powerline CO2 BB Pistol grouped very well, landing around a 2-inch group with the majority of rounds tightly clustered on the bullseye. There was only one flyer that fell outside the primary group just up and to the left. The fiber optic front, and wide open rear sight are fixed, so you may need to adjust your point of aim if you want perfect vertical zero as each shooter will place shots a bit differently, but overall it was impressively centered for a budget pistol.
All told, the Daisy 415 Powerline CO2 BB Pistol is a well-powered, accurate little gun with a cheap price tag and a low cost to shoot. One caveat: it doesn’t use a typical removable stick magazine, you have to load it via the internal spring magazine, but that loading method has a silver lining: the forced pauses between reloads let the pistol warm up slightly, which can help maintain higher sustained fps over successive strings. For anyone wanting an inexpensive, reliable plinker with real punch and decent accuracy, this one is worth a look.
Type: Blowback CO2 Airsoft Pistol. Manufacturer: Distributed by KJ Works. Model:KP-18 TBC. Materials: Metal & Polymer. Weight: 1.7 pounds (770 grams). Total Length: 7.9 inches (20cm) Barrel: 4 inches (10.6cm) metal non-rifled. Propulsion: CO2 x 1 (Gas mags available). Action: Semi & full auto blowback, SAO trigger. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: 22 round drop out full size metal magazine. FPS: Claimed 410 (with barrel extension).
Trigger Pull: The trigger on the KJWorks KP-18 TBC CO2 Blowback Airsoft Pistol behaves like a true Single Action Only unit, pleasantly light with a fairly short travel. There’s a bit of initial take-up, but you can clearly sense the crisp break near the rear where the release occurs, extremely light, consistent, and free of any noticeable slack. Remember you’ll need to rack the slide to chamber the first BB; after that the blowback mechanism handles all subsequent cycling.
Accuracy: I haven’t yet fired the KJWorks KP-18 TBC CO2 Blowback Airsoft Pistol or produced a Field Test Performance video for it. However, I’ve already completed a full field and shooting test for the very similar KJWorks KP-13, so I’d expect comparable on-target performance between the two. I’ll post a full field test and shooting video for the KP-18 TBC down the road, stay tuned.
Build Quality: KJWorks pistols are generally well made, and I expect the KP-18 TBC to follow that pattern. Based on my hands-on time with the KJWorks KP-18 TBC CO2 Blowback Airsoft Pistol and my first impressions of the KP-18, fit and finish look excellent. As with other models, you’ll find metal and polymer components positioned where they would be on a real modern semi-auto pistol, which contributes to the solid, authentic feel.
Realism: The KJWorks KP-18 TBC is a close visual replica of the real-steel Glock G18-style pistol, albeit without official licensing. Umarex holds the Glock license for many BB and Airsoft models, and the fact that a green-gas magazine from the Umarex Glock 17 full-blowback fits the KP-18 suggests KJWorks may be manufacturing some Glock-pattern airguns for Umarex. Glock has historically objected to unlicensed replicas in North America, so how this will play out remains unclear. For now, both licensed and unlicensed options exist for buyers.
Pros:
Metal and Polymer with decent weight and good feel to it.
Heavy Full blowback operation.
Excellent fit and finish as always with KJWorks pistols.
High capacity full size drop out magazine that holds the CO2 and 22 rounds.
Well hidden safety incorporated into the serial number under the barrel.
Working trigger safety.
White dot front sight and white outlined rear sight for easy target acquisition.
All working components like a real steel Glock styled pistol.
Comes with extended threaded outer barrel for adding a possible compensator or mock-suppressor.
Comes with barrel extension for higher velocity shooting (Possibly for easier import into Canada).
Would make a good training weapon if you are a real steel Glock owner.
Has a semi and full auto selector toggle located on the left rear of the slide.
Can use CO2 or gas magazines.
Field strip-able.
No orange tip.
Cons:
Sights are not adjustable.
Full auto will use CO2 like crazy but may be worth it.
Not a licensed version.
Comments:
If you’re a Glock enthusiast seeking a realistic training piece, you can shoot more affordably and in more places, there are more choices than ever. If official licensing matters, Umarex is the go-to option, although I haven’t seen a full-auto Glock from them yet. For those who prioritize a full-auto-style experience, the KJWorks KP-18 TBC CO2 Blowback Airsoft Pistol is as close to a real-steel Glock full-auto feel as you’re likely to find. I also appreciate the magazine interchangeability with some Umarex Glock mags if you already own a Glock 17 Airsoft pistol for instance. Whatever route you choose, it’s great to see more Glock-pattern airguns coming to market.
In this Umboxing Preview Video I take a quick look at tow Airsoft Guns from KJWorks, one is a Gas Blowback Airsoft Rifle and one is a CO2 Full Blowback Airsoft Pistol. I don’t get into too many of the details or specifications as this is really the first time I have seen either of these Airsoft Guns in person, a full table top and field test video review will be coming up for both of these Airguns down the road but I did want to get them out there so everyone know these are either in the Replica Airguns Online Store or will be showing up soon.
The first item I grabbed out of the box was the KJWorks KP-18 TBC CO2 Full Blowback Airsoft Pistol which looks a lot like a Glock but with a full auto selector switch on the left side of the slide and it also is the TBC model so it comes with a barrel extension that attaches to the inner barrel and the option to add a mock suppressor to the outside barrel threads. This version comes with a CO2 magazine but I am sure there are option to use it with a Gas magazine also.
Next out of the box was the KJWorks M700 Take Down Gas Airsoft Sniper Rifle which is a break down bolt action gas operated Sniper based Rifle as the name suggests. It is super easy to assemble and has a nice smooth bolt with the only sighting option being the addition of a scope added to the included picatinny rail. The base of this rifle is very heavy so it is is not a light weight rifle by any means.
Here are some more details for each of these Airsoft Gun:
I took the Umarex Combat Zone Enforcer CO2 NBB Airsoft Pistol out for some testing today to see how it performs in action. I’ve already put together a detailed tabletop review a while back covering all the specs, build quality, pros, and cons, so if you’re after the close-up details you can check that out separately. For this session, I wanted to focus only on performance—running it over the chronograph to measure velocity and then shooting a 10-round group at 30 feet to check accuracy in a more practical setup.
For the chronograph test, I used a new 12-gram CO2 cartridge paired with standard 0.25-gram BBs, and the weather was sitting at about 24°C (75°F). Across five shots, the readings came in at 327, 330, 330, 323, and 321 fps, averaging out to 326 fps. That’s a solid number for a non-blowback pistol running slightly heavier BBs, and if you were to switch down to .20-gram BBs, you’d likely see a noticeable increase in velocity.
When it came to accuracy, I shot from 30 feet in a semi-rested stance, bracing my hands against a sandbag while seated. The Umarex Combat Zone Enforcer CO2 NBB Airsoft Pistol grouped right around 2.5 inches, which is respectable for its category. Straight out of the box, with fixed sights that can’t be adjusted, it landed shots centered left to right and just a touch low. Since there’s no hop-up built in, you’ll need to adjust your point of aim or consider adding a laser if you want a more refined zero.
All in all, the Umarex Combat Zone Enforcer CO2 NBB Airsoft Pistol performed about as expected. Velocity was a little lower than I had initially hoped, but that comes down to using .25-gram BBs, which naturally slow things down a bit. Accuracy was solid for an entry-level pistol, and while the double-action trigger is on the heavier side, it breaks cleanly and predictably once you get used to it. It’s not really designed for rapid-fire action shooting, but if you’re looking for a budget-friendly sidearm that works reliably and allows you to carry multiple compact, affordable magazines, the Enforcer is definitely up to the task.
I had a really fun time teasing out the KJWorks Full Metal 1911 TBC CO2 Airsoft Pistol. I’ve already done a full tabletop review covering all the specifications, features, pros, and cons, so check that one out if you want the detailed breakdown adn more closer up video. Today’s video is all about the performance. I’m running it through the chronograph to see how fast it really shoots, and then putting ten rounds on paper target at 30 feet to get a realistic look at its true accuracy.
For the velocity test, I loaded up a fresh 12-gram CO2 cartridge and standard 0.25-gram Airsoft BBs. The temperature during testing was about 24°C, or 75°F. Six shots over the chronograph came in at 296, 316, 299, 296, 301, and 294 feet per second, which works out to a 300 fps average. Not bad using the heavier .25 gram Airsoft BB’s. That’s a solid result for this full blowback platform, and on a warmer day adn using .20 gram Airsoft BB’s, you could probably squeeze a bit more speed out of it.
As per usual, accuracy testing was done from 30 feet out, shooting from a semi-rested position with my hands braced on a sandbag for stability and sitting on a stool in the back. The KJWorks Full Metal 1911 TBC CO2 Airsoft Pistol printed slightly high, but windage was spot-on, and the string came in at roughly a 1.5-inch group. One shot wandered off a bit low as a flyer, but overall, the grouping was tight for a CO2 blowback Airsoft pistol, showing it’s more than capable of consistent performance.
Overall, I came away impressed with the KJWorks Full Metal 1911 TBC CO2 Airsoft Pistol. The single-action trigger is crisp and light, giving it a very clean break. The blowback is strong and sharp, adding to the realism, and the build quality looks and feels solid in the hand. With its accurate shooting, great trigger feel, and satisfying recoil, this pistol is an excellent pick for anyone after a high-quality CO2 blowback 1911 that looks, feels, and performs the part. Another winner form KJWorks!
I finally got my hands on the new Umarex Glock 17 Gen 5 MOS CO2 Blowback BB Pistol that was introduced at this years SHOT Show, and I have already made my Table Top Review Video so make sure to watch that video for information on specifications, details, Pro’s and Con’s and more close up video… In this Field test Shooting video I focus on the performance of the Umarex Glock 17 Gen 5 MOS CO2 Blowback BB Pistol by testing the velocity out with my Chronograph, and I also shoot 10 rounds into a paper target setup 30 feet down range to see what the real world velocity and accuracy truly is.
Starting off with the Velocity portion the test, as always I use a brand new 12 gram CO2 along with standard 5.1 grain Steel BB’s. Temperature for the record was about 22 degrees Celsius or 72 degrees Fahrenheit. Here are the result of my multi shot Chronograph testing as it seemed to keep shooting faster and fast so I ended up using the last 5 shots for my average: 354, 349, 348, 343, 344 fps with an average of 348 fps. That was fairly close but just a bit under the 370 claimed fps. Warmer temperatures could for sure get this Blowback Airgun up to the slightly higher claimed fps.
Next I shot 10 rounds into a fresh paper target 30 feet down range using a semi-rested shooting position, with my hands resting on a sand bag up front, and sitting on a comfortable stool in the back, for somewhat stable shooting. There is always going to be a bit of human factor involved, but I seemed steady on this day, and I did get a nice result for a Blowback CO2 Air Pistol. The Umarex Glock 17 Gen 5 MOS CO2 Blowback BB Pistol shot good for me out of the box. The grouping spread out about 2 inches total well center up and down, just a hair above the bullseye but did wonder off to the left a little bit. Still a very good result for a blowback Airgun.
I was very pleased with the performance of the Umarex Glock 17 Gen 5 MOS CO2 Blowback BB Pistol. It had a lot more blowback action than I was expecting as the slide spring did feel kind of lazy to me when releasing it at first. The velocity was close to the mark and for sure as claimed in a warmer environment, and the accuracy was as good as you are going to get with a blowback BB Pistol. I didn't even mind the double action trigger at all as the first portion of the trigger is very light with almost no friction and even the release is not very heavy but for sure heavier than a true Single Action Trigger. I also like that you are going to get a lot more magazines worth of shots from a single CO2 out of the Umarex Glock 17 Gen 5 MOS CO2 Blowback BB Pistol with it’s semi blowback action and magazine design that seals off the BB into the breach area of the barrel. If you are OK with a DO trigger on a Glock, then I would suggest you chose the Glock 17 MOS Semi Blowback over the Glock 19 MOS Full Blowback simply for the higher fps, better CO2 efficiency and slightly improved accuracy.
I finally got my hands on the new Umarex Glock 19 Gen 5 MOS CO2 Blowback BB Pistol that was introduced this year at SHOT Show and I have already made my Table Top Review Video so make sure to watch that video for information on specifications, details, Pro’s and Con’s and more close up video… In this Field test Shooting video I focus on the performance of the Umarex Glock 19 Gen 5 MOS CO2 Blowback BB Pistol by testing the velocity out with my Chronograph and also shooting 10 rounds into a paper target setup 30 feet away to see what the real world velocity and accuracy actually is.
Starting off with the Velocity portion the test, I us a brand new 12 gram CO2 along with standard 5.1 grain Steel BB’s. Temperature for the record was about 22 degrees Celsius or 72 degrees Fahrenheit. Here were the result of my 5 shot Chronograph testing: 278, 275, 273, 273, 271 fps with an average of 274 fps. That was very consistent for a full blowback CO2 Airgun and close to the 280-290 claimed fps. Warmer temperatures could for sure get this Airgun up to the claimed fps.
Next I shot 10 rounds into a fresh paper target 30 feet down range using a semi rested shooting position, so with my hands resting on a sand bag up front and sitting on a stool in the back for somewhat stable shooting. There is always a bit of human factor involved but I seemed pretty steady on this day, and for what I consider to be a good result for a Full Blowback CO2 Air Pistol. The Umarex Glock 19 Gen 5 MOS CO2 Blowback BB Pistol shot a little bit low out of the box but well centered left to right. The grouping spread out about 3 inches total and that was mostly in the elevation so perhaps an inconsistency in velocity may have played a roll. In terms of windage (left to right placement), the group was closer to two inches total.
I was very pleased with the performance of the Umarex Glock 19 Gen 5 MOS CO2 Blowback BB Pistol , it shot really close to the claimed velocity with a fairly consistent fps for the most part. The accuracy was also right where I would expect a gun like this to perform and even though it shot a bit low on the bullseye, it was in the ball park and easy enough to simply adjust ones aim point to get more on target. The blowback action is quick and snappy with a nice simulated recoil and the single action trigger feels good. I did end up shooting two full 17 round magazines through this Airgun with no problem, and after letting it warm up a bit there is more than likely a third magazine left of CO2. If you want the most ultra realistic BB version of a Full Blowback Airgun with the ability to add a Red Dot to the top slide, then the Umarex Glock 19 Gen 5 MOS CO2 Blowback BB Pistol is the prefect choice!
I also got a few accessor items from a company called GEAR STOCK, Some CO2 in 12 and 88 gram along with some 6mm aluminum Airsoft BB’s. A very cool rechargeable red and green laser that comes in a nice hard shell case and it has a picatinny rail on the bottom she you can stack a second accessory under it.
Here are some links and specs for the Airguns I show off in this mystery box video:
Type: Blowback CO2 Airsoft Pistol. Manufacturer: Distributed by KJ Works. Model:1911 TBC. Materials: Mostly all Metal. Weight: 2.2 pounds (980 grams). Total Length: 8.6 inches (218mm) Barrel: 4.25 inches (108mm) metal non-rifled. Propulsion: CO2 x 1. Action: Semi auto blowback, SAO trigger. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: 24 round drop out full size metal magazine. FPS: Claimed 360+.
Trigger Pull: The trigger pull on the KJWorks Full Metal 1911 TBC CO2 Airsoft Pistol is exactly what you would expect from a similar real steel 1911, it’s super short and light, the take-up is almost non-existent with a super light release. There is no adjustment on it but I don’t feel it is needed at all as this is not a competition Airgun, KJWorks does make and sell 1911’s more suited for competition shooting. There is just something about a 1911 trigger that I love!
Accuracy: At this point I have not shot the KJWorks Full Metal 1911 TBC CO2 Airsoft Pistol or even made my Field Test Shooting Performance Video. I have shot a fair amount of KJWorks Full Blowback Airsoft Pistols and they have in all seemed to perform very well for me. So I’m confident when I get to the Field Test Shooting Video for the KJWorks Full Metal 1911 TBC CO2 Airsoft Pistol I will not be disappointed in it.
Build Quality: The KJWorks line of Airsoft Guns are known for their quality build and attention to detail, the KJWorks Full Metal 1911 TBC CO2 Airsoft Pistol is no exception. It is a mostly all metal Airgun with the acceptation of the grips and gas tube, and perhaps a couple other small internal parts? Fit and finish is bang on and the slide spring feels nice and firm, which should result in a nice crisp blowback action. There is almost no slide wiggle with the KJWorks Full Metal 1911 TBC CO2 Airsoft Pistol which again speaks to the quality and workmanship of KJWorks products.
Realism: I’m not really sure how you could get a more realistic Airsoft Pistol than what you have here with the KJWorks Full Metal 1911 TBC CO2 Airsoft Pistol. It is 1 to 1 scale and functions almost identically to a real steel 1911 A1. It has full blowback operation and can be field stripped fully top to bottom. Even the grip safety is required in order to shoot it. This version in order to fit the flared out CO2 cartridges does have indents in the magwell which is different than what you would ind on a traditional 1911 but it is not super obvious.
Pros:
Pretty much all metal pistol with good weight to it.
Full heavy blowback operation.
Excellent fit and finish as always with KJWorks pistols.
High capacity full size drop out magazine that holds the Airsoft BB’s and CO2. (Can get Green Gas mags also).
Comes with barrel extension and threaded barrel tip.
Comes in all black and OD green two tone finish.
Working backstop safety
Nice short and light true 1911 style single action only trigger.
Fully field strip-able.
Cons:
Sight are non-adjustable and do not have any white or fiber inserts.
No rail mounting options.
CO2 magazine sticks out a bit.
Comments:
If you are looking for a traditional 1911 styled semi auto Colt Pistol and don’t want a more modernized 1911 then the KJWorks Full Metal 1911 TBC CO2 Airsoft Pistol has that classic look but with a bit of an upgraded magazine and the ability to add a mock compensator mainly to protect and hide the barrel extension which when added will increase the velocity and perhaps also accuracy. I like the all black version but you can also get one in two tone OD Green for a more contrasted look. Looking down the sights will be your biggest challenge with the KJWorks Full Metal 1911 TBC CO2 Airsoft Pistol, as it has standard post and notch sights that do not have any white dots or marking to assist with aiming. It will be an upgrade for sure from a lessor expensive KWC Full Blowback 1911 and I feel ti is worth the additional money especially if you are a big 1911 fan like me.
In this Unboxing Video I checkout a mid sized mystery box and find some new products inside that I will be making future Table Top and Field Test Shooting Videos for. In this Unboxing Preview Video I mainly talk a look at each item mostly for the fist time and I go over some of the basics for each of them. IN my upcoming full review videos I will go way more into detail so make sure to watch those videos when they come out.
So what did I get in this months box of goodies? The first item I unpacked was the KJWorks 1911-TBC CO2 Blowback Airsoft Pistol. A firmly traditional 1911 with a single stack magazine configuration at least in terms of external size. I am pretty sure the actual Airsoft BB’s will stack side by side to some degre as it does hold 24 rounds. It also comes with a barrel extension and the ability to add a much suppresser to it to cover the barrel extension I would imagine. It is also available in an OD green receiver version.
The next item I grabbed from the box was the NcSTAR FlipDot Mod. 02 Flip-up Red Dot Sight specifically designed with a MOS compatible mounting plate for Glock Pistols like the new Umarex Glocks I checked out at this years SHOT Show. You can mount this compact Flip-up Red Dot sight directly to the slide of these new Glocks and it also comes with some adaptor plate option for attaching it to a Picatinny Rail.
The next item I took a look at was the Umarex Combat Zone Enforcer Airsoft Pistol. A low cost adn simplistic mostly plastic CO2 powered lightweight Airgun with an all metal 15 round stick magazine and a 400 fps claimed velocity. It’s not going to be the most exciting Airgun but there is very little to go wrong and being so light weight makes it super durable in the even of a drop or fall.
Last but perhaps the oust interesting item that came in this months mystery box was the G&G ARP9 3.0P AEG Airsoft Rifle. I kind of butchered the name but I do talk a pretty good look at it in they video. The G&G ARP9 3.0P is a compact AEG Rifle (at least with the stock folded out). It has a unique magazine where the Airsoft BB’s load into 4 separate channels, I am assuming this helps to get more ammo in the magazine (300 rounds) and make it smoother so hopefully less or no jamming. The G&G ARP9 3.0P feels solid in the hand and well made, it also has a claimed velocity of 370 fps which is perfect.
I look forward to making my full Table Top and Shooting Review videos of each of these items so make sure to check back if you are interested in any of them…
If you are looking for all the details and specifications for the Specna Arms SA-FX11 FLEX AEG Airsoft Rifle, then make sure to watch my Table Top Video that I have already posted. In this Field Test Shooting Video I test out the Specna Arms SA-FX11 FLEX AEG Airsoft Rifle in the Replica Airguns Indoor Sea Can Shooting Range to find out what the actual velocity is and how accurate it is shooting in both semi and full auto.
Starting with my velocity test, I shot 5 plus rounds though my Chronograph using .25 gram Airsoft BB’s and then averaged them out. I generally use .20 gram Airsfot BB’s but I ran out so I went with the slightly heavier .25 gram BB’s. Specna Arms claims around 380 fps using .20 gram Airsoft BB’s so I was expecting a bit below the rated claim. I did manage to average a nice 362 fps with the slowest shot hitting 245 fps and the fastest shot hitting 366 fps, most were int he 360’s by the way.
For the next portion of the Field Test Shooting Video I placed a fresh pepper target on my Airgun Trap 30 feet down range and first shot 10 rounds into it using a semi rested shooting position with my hands resting on a sand bag up front, and sitting on a stool in the back. I got an impressive 1.75 inch grouping that was slightly low and to the right but this can be easily sorted out using the fully adjustable sights. I then switched up to full auto I performed a partial mag dump of around 50-75 rounds. The grouping did not really get any larger, perhaps at most around 2 inches. I was very happy with these results.
I have to say for a $200 Canadian (at the time of this video) AEG Airsoft Rifle, it performs like similar much higher priced AEG’s, but at a fraction of the price! If you are looking for a more lower cost and more traditional AR 15 platform that is not over the top moderned out, then the Specna Arms SA-FX11 FLEX AEG Airsoft Rifle is ideal, and if you do want to update it down the road, you certainly could as it is all based on the AR 15 platform. You will need to make sure to add a battery and charging system to your order if you don’t already have one, along with bag if Airsoft BB’s. The .25 gram Airsoft BB’s I was using performed really well in it.
Before I get into this Field Test Shooting Video for the Bug-A-Salt 3.0, make sure to watch my Table Top Video Review for it where I go into more details and specifications along with some nice close up video of it. In this Field Test Outdoor Shooting Video I test out the Bug-A-Salt 3.0 on some wrapping paper (Wrapping Tissue Paper) from various distances to see what damage the Bug-A-Salt 3.0 does to it. You do really need to get in pretty close to see significant damage, but if you where a small bug you would at bare minimum be stunned and immobilized waiting for that fatal kill shot.
I was hoping to go on a kind of Bug Safari Hunt out in the yard, so I did a dry run without my cameras running and I quickly found out that bugs in the wild are extremely elusive. They much prefer the comfort of your home which is of course the ideal location for using the Bug-A-Salt 3.0, but not great for shooting a video…
I was not able to record velocity or accuracy for that matter using the Bug-A-Salt 3.0 as it is more like a salt shotgun but as fate would have it, one very unlucky fly did land near by while I was recording, and it met its fate for the sake of this video. I also vaporized some butter cups (These are small yellow flowers that grow wild in the grass). All in all I was able to showcase the effectiveness of the Bug-A-Salt 3.0. My advice is to get in nice and close if you want a one shot kill, or you will have to take some follow up mercy shots.
This is part 2 of my 2 part Field Test for the Umarex P2P HDP 50 Compact CO2 Rubber Ball Less Lethal Pistol. In this video (Part 2), I test out 2.7 gram rubber/steel balls (metal core) to find out what the velocity and accuracy is along with the overall joules energy rating. Umarex claims around 11 joules using the 1.6 gram standard rubber balls, I do expect less velocity and possibly less energy downrange with the heavier 2.7 gram ammunition. While I test out the velocity with my Chronograph, I also aim at a paper target setup 30 feet away to see just how accurate this ammo type is, and hopefully I get all 4 of the max rounds close to where I am aiming on the target.
Starting with velocity or power, I was hoping to get into the 250+ fps so I could get somewhere near the claimed 11 joules, but the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol shot more in the higher 100’s resulting in a three shot average of 176 fps. I did chronograph all 4 shots and they were somewhat close in velocity to each other: 159, 187, 176, 180 fps. Even then the average Joules was only around 4 which is a pretty far off the claimed 11 joules and even less than the 5 Joules I got using the standard all rubber 2.6 gram rubber balls. I did use a brand new CO2 and it was not exactly cold in my testing environment so I am too sure what caused the lower results from both ammo types?
While I was recording the velocity I was simultaneously recording the same 4 shots on the target and I did mange to get all 4 shots on my 8x11 paper target fairly well centered with a grouping with three of the 4 shots all within about 2.5 inches of each other adn very well center to the bullseye. One shot did hit a bit lower extending the group to around 5 inches. If this was an intruder I would have for sure been able to hit them easily at 30 feet away all within their main torso area. So in terms of accuracy with both ammo types, the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol was competent when using both the standard rubber balls and the rubber/steel balls I used in this review.
As mentioned in video 1 of this 2 part series, I do like the smaller size of the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol over the non-compact version but it does seem to be down significantly on power as compared to its larger brother adn this was the case using both ammo types. I am not sure if it would be a good deterrent based on the power output I got in my Field Tests. I am sure it would not want to be on the receiving end of this Less Lethal Pistol, perhaps it the intended vital was not wearing any thick clothing it would deter them but even a light jacket would probably stop most of the impact. Maybe at close range some head and face shots would get the job done, but in the heat of the moment I would not count on being able to make those type of consistent shots. My advice is if you want to use the the Umarex P2P HDP 50 Compact CO2 Rubber Ball Less Lethal Pistol as intended, then go with the non compact version as it does hit the claimed power rating and then some.
This is part 1 of my 2 part Field Test for the Umarex P2P HDP 50 Compact CO2 Rubber Ball Less Lethal Pistol. In this video (Part 1), I test out the included 1.6 gram solid rubber balls to find out what the velocity and accuracy is along with the overall joules rating. Umarex claims around 11 joules using the 1.6 gram rubber balls. While I test out the velocity with my Chronograph, I also aim at a paper target setup 30 feet downrange to see just how accuracy it is, and if I can get all 4 of the max rounds close to where I am aiming. In Part 2 I swap out the 1.6 gram rubber balls for 2.7 gram rubber'/steel balls that have a metal internal core.
Starting with velocity or power, I was hoping to get into the 300+ fps so I could get somewhere near the claimed 11 joules, but the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol shot more in the mid 200’s resulting in a three shot average of 255 fps. I did chronograph all 4 shots but the last shot was really low for some reason, so I tossed that one out to give the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol the benefit of the doubt. Even then the average joules was only 5 which is a far cry to the claimed 11 joules. I did use a brand new CO2 and it was not exactly cold in my testing environment so I am too sure what caused the lower result?
As I mentioned, while I was recording the velocity I was simultaneously recording the same shots on the target and I did mange to get all 4 shots on my 8x11 paper target fairly well centered with a grouping of about 6-7 inches apart. If this was an intruder I would have for sure been able to hit them easily at 30 feet away all within their main torso area. So in terms of accuracy the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol was very usable.
I do like the smaller size of the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol over the non-compact version but it does seem to be down significantly on power as compared to its larger brother. I am not sure if it would be a good deterrent based on the power output I got in this Field Test. I am sure it would not be enjoyable being on the receiving end of this Less Lethal Pistol, but if the intended victim is wearing any type of heavy clothing I don’t think they would be that concerned by this Airgun. Maybe at close range some head and face shots would get the job done, but in the heat of the moment I would not count on being able to make those type of consistent shots. My advice is if you want to use the the Umarex P2P HDP 50 Compact CO2 Rubber Ball Less Lethal Pistol as intended, then go with the non compact version as it does hit the claimed power rating and then some.
Type:Airsoft AEG Rifle. Manufacturer: Specna Arms. Model: SA-FX11 FLEX. Materials: Nylon Reinforced Polymer, Zinc Alloy, and Steel Construction. Weight: 5.4 pounds (2.45 kg). Total Length: 27.5-31 inches (70-79cm). Barrel Length: 11.5 inches (29cm). Barrel: Inner 6.03mm tight bore barrel non rifled. Propulsion: AEG. Action: Semi and full auto single action only (SA ETU™ Optical Electronic System: Optimizes trigger response and improves lifespan). Hop-up: Rotary adjustable hop-up via ejection port. Ammunition Type: 6mm plastic Airsoft BB's. Ammunition Capacity: 380 round full size drop out AR style plastic magazine. FPS: 380.
Trigger Pull: The trigger on the Specna Arms SA-FX11 FLEX AEG Airsoft Rifle is as you would expect from an AEG Airsfot rifles as it is essentially an on/off trigger that completes a circuit that signals the MOSFET controller, in this case it is the X-ASR from the Polish GATE brand. Which is claimed to improve the response to the trigger and the life of the electronics and battery. The left side controls offer safety, semi auto and full auto positions for easy access to all shooting options.
Accuracy: I have not shot the Specna Arms SA-FX11 FLEX AEG Airsoft Rifle so far or tested it out in the Sea Can indoor shooting range. So I have no real idea in terms of accuracy or if it is close to the claimed 380 fps be see no reason why it should not easily achieve that velocity and also get good accuracy results based on other Specna Arms Field Test Shooting Reviews I have already made. I will be making a full dedicated Field Test Shooting Video for it as soon as I am able to, so stay posted for that one…
Build Quality: The Specna Arms SA-FX11 FLEX AEG Airsoft Rifle is on the lower price point but don’t let that make you think it is also lower in quality. There have been some compromises made so you will see a bit more plastic in this build, but even then it is high quality Nylon Fiber enforced plastic. Aluminum and Zink alloy are used for the barrel, flame damper, enlarged reloading handle, dummy breech block and manipulators and charging handle. All screws, pins, the cartridge ejection window and the dummy slide are made of steel. It also comes with a Factory-installed MOSFET X-ASR from the Polish GATE brand and SA ETU™ Optical Electronic System that optimizes trigger response and improves lifespan of this product.
Realism: The Specna Arms SA-FX11 FLEX AEG Airsoft Rifle is based on the AR M15 platform which makes it very ergonomic and easy to use but a bit more classic and not as modern as some of the newer AR15/16’s. You have full realistic controls just like you would find on a real steel version of the same rifle (charging handle, dust cover, safety selector, magazine release, adjustable sights front and back, removable carry handle. You can also customize the Specna Arms SA-FX11 FLEX AEG Airsoft Rifle with real steel accessories like the rear stock, pistol grips, you could even put a quad rail on it if you want to. Being that it has a plastic receiver it does come in a little bit lighter but not by a lot.
Pros:
Classic AR M15 look to it if you prefer that style, not overly modern.
Quality components throughout even in the lower priced point (FLEX).
ESA™ quick spring change system makes spring changes quick and easy.
Comes with two springs for potential indoor and outdoor usage.
Plastic parts are Nylon Fiber reenforced making them very durable.
Fully adjustable peep sight with two aperture positions.
No orange tip.
6 position rear stock for various shoulder pull lengths.
Metal V2 Gearboxes with metal gears and mostly all metal parts inside.
Easy access to motor for any possible trouble shooting you may need to do.
SA ETU™ Optical Electronic System: Optimizes Trigger Response And Improves The Lifespan.
Factory-installed MOSFET X-ASR from the Polish GATE brand.
Cons:
Plastic receiver.
Not many mounting locations for adding accessories unless you take the carry handle off, then you could add a red dot or optical sighting system.
You will need a more compact and specific battery size/type with this style of AR AEG as the battery goes in the small diameter buffer tube.
The Specna Arms SA-FX11 FLEX AEG Airsoft Rifle in my opinion coming in at just over $200 at the time of the making of this video and has an extremely good value based on price versus what you get in quality and features for this AEG Airsoft Rifle. Other than having a bit more plastic build, quality is excellent throughout. the electrons and gearbox also are not entry level by any means, and this all comes from the well proven Specna Arms brand. If you are OK with a little bit more dated look (which I kind of like being a bit more classic myself), then this is a great AEG Airsoft Rifle for the money. Later on if you want to add some more modern components to bring it back to a more recent decade, than you could easily do so.
In this part two video of our three part video series covering all the different ammo and barrel types that can be used with the Alias GEM Multi Ammo Mini CO2 Airgun, I test out the .50 caliber Paintball (Rubber Ball) barrel and ammo option to see what velocity and accrual I can get from the Alias Gem CO2 Airgun. If you have too already watch my Table Top Video and or my BB and Airsoft Field Test Shooting Video, then make sure to do so when you get a chance. Right off the bat I want to say that the Alias GEM Multi Ammo Mini CO2 Airgun is not at all an Airgun you are going to want to buy in terms of raw performance as you will see in this video and my other Field Test Videos for it in this series. It is however a very unique Airgun you can shoot up close with and have some fun shooting whatever ammo you decide to go with on that given day.
Starting with velocity, I should have put a brand new CO2 in the Airgun as I end up finding out only getting three good shots out of my remain CO2, because of the super short barrel and rather inefficient use of the CO2, you only get around 12-15 full use shots out of the Alias GEM Multi Ammo Mini CO2 Airgun and that is with the larger 12 gram CO2! For that reason I only based my average velocity through my Chronograph on the first three shots I took, which were all pretty close in velocity. Here are the results: 200, 207, 203 with an average of 203 fps using fairly light weight .50 Caliber Rubber Balls. Again the super short barrel does not do this Airgun any favors in the power department.
Moving onto the accuracy portion of this test, well you really don’t need to watch this part as I was not able to hit my 8x11 target setup 30 feet away. Part of the problem is that there are no sights on the .50 Caliber Paintball Barrel and the other factor is that the Alias GEM Multi Ammo Mini CO2 Airgun kind of throws rounds all over the place no matter what ammo or barrel type you choose, so trying to figure out exactly where to aim is kind of hard and so I may have simply not been aiming in the best location on the target to get best results. In hind sight I probably should have just shot this Airgun a lot closer than I do when making my standard Field Test Shooting Videos, but this is my standard shooting location and so I stuck with it.
After I make my videos, I sometimes see things I did not notice when I was making them, and in this case I can see that the .50 caliber Paintball Rubber Rounds I was using did not always go as deep in the barrel as you need to front load them and kind of tap them and let gravity help ease them in. I should have perhaps used a pencil or something like it to push the Rubber Balls all the way in for more consistent performance in terms of velocity and accuracy. Well now we all know! You are not going to be using this Paintball Airgun for any kind of Paintball war games and so in my opinion I would go with the included 6mm Airsoft BB’s for shooting in areas where a 4.5mm metal BB may not be good idea. The 6mm Plastic Airsoft BB’s seemed to have the highest velocity averaging 383 fps with .25 gram Airsoft BB’s and I was able to get some of them on the paper target at 30 feet away.
This Field Test Shooting Video for the Alias GEM Multi Ammo Mini CO2 Airgun is part one of three videos where I will be testing out the included 4.5mm Steel BB Barrel and 6mm Airsoft Barrel options that come with it in the box. I also have the .50 Caliber Paintball and rocket Barrels that I will be testing in Field test Videos two and three consecutive to this video. Normally I first test velocity and then I test accuracy, but in this three part video series I test velocity and accuracy at the same time being that the Alias GEM Multi Ammo Mini CO2 Airgun is a single shot pistol. I get the same end testing results as I would normally get, but I do only shoot 5 rounds at the target, spoiler alert the Alias GEM Multi Ammo Mini CO2 Airgun is not all that accurate, so I am not sure if adding another 5 more shots would have shown us a different result.
In terms of velocity, keep in mind the barrel is super short on the Alias GEM Multi Ammo Mini CO2 Airgun at just over 3 inches when using the 4.5mm Steel BB, the 6mm Airsoft, and the .50 caliber Paintball Barrels. That said with 4.5mm Steel BB’s I did average 263 fps and with 6mm .25 gram Plastic Airsoft BB’s, I averaged 383 fps which was actually pretty good. The temperature was mid warm so pretty close to room temperature when I performed my test.
Accuracy was not nearly as good as I was hoping for, I was not expecting stellar results and I would say I got even less than stellar results only getting 3 of the 4.5mm Steel BB’s on the paper target and only 2 of the 6mm Airsoft BB’s on the target. I did struggle with exactly where I needed to aim the Alias GEM Multi Ammo Mini CO2 Airgun as BB’s were so inconsistent. Perhaps if I was able to figure out the ideal aim point, I would have had more BB’s land on the target. Even the sights are hard to use with such a small Airgun having a super short barrel. If you are hoping the .50 caliber Paintball rounds and Rockets (Bolts) do better, don’t count on it…
All in all Alias GEM Multi Ammo Mini CO2 Airgun is a super cool and unique Airgun that has a lot of options when it comes to ammo choice. I would not recommend using it at anywhere close to 30 feet away as I did in this test, this is how my Airgun range is setup. It would be a lot better at 20 feet or even 10 feet since it is not a lot of fun if when you shoot at something, you don’t really ever hit it ;) Stay posted for my upcoming Field Test Shooting Videos for the .50 Caliber Paintballs and the Rockets (Bolts). I have also made a Table Top video you can check out if you are interested in more of the details and specifications along with some nice close up video of the Alias GEM Multi Ammo Mini CO2 Airgun.
In this Field Test Shooting Video I test out the real world shooting performance of the Specna Arms SA-FX02 FLEX AEG Airsoft Rifle by shooting 5 rounds through my Chronograph and averaging them out. I then shot the Specna Arms SA-FX02 FLEX AEG Airsoft Rifle in both semi auto and full auto to find out what kind of groupings I can achieve shooting at a paper target setup 30 feet away. I’ve already made my Table Top Video where I go into the details and specifications along with some closer in video, so if that is more what you are looking for, then checkout my Table Top Video Review here.
Being an AEG Airsoft rifle the Specna Arms SA-FX02 FLEX AEG Airsoft Rifle is somewhat expected to get consistent velocity readings as there is no effect on an AEG when it comes to the gun cooling down from either Gas or CO2 and the velocity dropping. I chose .25 gram Airsfot BB’s since I was out of .20 gram Airsoft BB’s on this day, so I would expect a little bit higher velocities if using .20 gram Airsoft BB’s, so keep that in mind with this test. As expected I got very close readings when I shot 5 rounds through the Chronograph to get an average for them. Here is each shot listed in order and then my 5 shot average velocity: 361, 360, 365, 364, 361 averaging 362 fps. All within 4 fps of each other, kind of as expected but still very good. You can swap out the spring with the included M90 spring for somewhat lower velocities if you like.
Since the Specna Arms SA-FX02 FLEX AEG Airsoft Rifle can shoot in both semi and full auto, I tested it first using the built in pop-up sights shooting 10 rounds in semi auto, again using the .25 gram Airsoft BB’s and it shot a nice accurate 2 inch grouping at my target setup 30 feet away. I do use a rested shooting position sitting on a stool in the back and my hands rested on a sandbag up front which still includes a bit of human factor but not a lot. I did not adjust the sights at all and shot the Specna Arms SA-FX02 FLEX AEG Airsoft Rifle right out of the box. It did shoot about 5-6 inches low on my target setup 30 feet away, but was good left to right. I could easily adjust my aim point using the adjustments on the pop-up sights or through a red dot or optical scope on it. My Full Auto test was also very accurate with the grouping not really opening up at all, even with an additional 50 or so full auto shots! This may be one of my most accurate full auto Airsoft Rifles?
The Specna Arms SA-FX02 FLEX AEG Airsoft Rifle is a good value AEG Airsoft Rifle made for both beginners and seasoned Airsoft enthusiasts. It performs really good with quality internals where they are needed, and it is nice and compact with three color choices, black, black and tan and the one I used here in pink and black. If you are just starting out you can’t really go wrong with the Specna Arms SA-FX02 FLEX AEG Airsoft Rifle when considering price verses performance. As a more advanced Airsoft player you may just want something to use when you know it may get a beat up or exposed to harsh environments, so why not pickup something you don’t have to be as concerned about? Either way a great choice based on price and performance alone.
