Entries in Comparison,Pellet

Umarex P2P HDP 50 Gen 2 CO2 Rubber and Powder Ball Less Lethal Pistol Table Top Review

No Comments

Type: Less Lethal Pistol.
Manufacturer: Umarex - T4E.
Model: P2P HDP 50.
Materials: Metal & Polymer.
Weight: 1.5 pounds (.7 kg).
Barrel: 4 inches (10.2 cm) Smooth bore.
Total Length: 8.5 inches (21.6 cm).
Power Source: 1x12 gram CO2.
Action: Semi auto - Double action only trigger.
Ammo Type: .50 Caliber Rubber Ball, Pepper Ball, Powder Ball.
Ammo Capacity: 6 Round spring fed internal magazine.
FPS: 485 (13 Joules).

Trigger Pull: The trigger pull on Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol is double action only but not overly long or heavy. There does not seem to be any ammo friction which is nice, so the each round feels about the same with spring tension not playing a factor. In order to use the trigger, the Pistol will need to be fully charged by loading a 12 gram CO2 and giving it a smack on the bottom of the pistol grip. This will pierce the CO2, charging the gun with pressure and activation the trigger mechanism. When the CO2 pressure becomes too low, the trigger will not function and a fresh CO2 will needed to be swapped over.

Accuracy: So far I have only briefly tried out the Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol here in the Replica Airguns Indoor Airgun Shooting Range, and I was rather impressed at the initial performance as it did seem to be moving the .50 call rubber balls I was shooting at close to 500 fps with a lot of energy as my pepper and cardboard target was dislodged from the backstop after a few shots. Accuracy seems to be as expected from a Paintball type pistol, so I am expecting to get around a 4-6 inch 6 shot grouping at 30 feet away which will be effective in a Less Lethal encounter.

Build Quality: The build quality of the Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol is good overall. It is mostly made out of plastic which is fine, as I feel that if it was mostly metal, and because of its larger size, it would be on the heavy side and not something you may want to use in a cary situation if that was your plan. There is metal where it needs to be in most of the mechanical areas including the barrel, trigger, charging system and I am sure other internal parts. The plastic parts feel well made and fit and finish is very good. The Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol does have more than enough weight at 1.5 pounds to feel solid in the hand.

Realism: This version of the Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol comes with the orange slide to show that it is not a lethal firearm. I have seen all black version but at this time we only sell the colored slide version. This does make it obvious that the Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol is not a “Real Firearm” designed for lethal encounters, which in Canada is a good thing since our self protection laws seem to favor the criminal more than the victim. So making sure you are using a tool designed to deter a criminal rather than harm or kill them, is hopefully going to keep you out of trouble with the law. That said the Umarex P2P HDR 50 Gen 2 CO2 Less Lethal Pistol does look like a modern semi auto pistol and functions much the same but with less force.

Pros:

  • Not many options for a true less-lethal option here in Canada. This Airgun is purpose built for less lethal use so it has what I believe is enough power to actually dissuade most intruders.

  • In this case I like that it is clearly marked in orange to indicate it is not an actual lethal firearm. When protecting yourself in Canada you have to be cautious with your intentions, and having clear orange markings will help in your case to show that you where not trying to give the impression of using a real firearm.

  • Nice powerful 485fps with a 13 Joules energy rating.

  • Can store the 12 gram CO2 in it and activate with a quick hit to the bottom of the CO2 screw.

  • Holds 6 rounds in the internal magazine which hopefully gets the job done. Should be able to reload at least one more time for a total of 12 shots per 12 gram CO2.

  • Fiber Optic sights make it easy to line up your target in most lighting conditions and backgrounds.

  • Double action trigger feels smooth and not too heavy or long, also has a trigger safety on it.

  • Can add a tactical light or laser to the under barrel picatinny rail.

  • Comes with 10 rubber and 10 powder balls to get you started.

Cons:

  • It is a bit on the larger size, not going to be easy to cary if that is your plan. I do not know what the legal ramifications of carrying this would be as it is clearly designed for protection and not for lethal encounters.

  • Not a lot of shots per CO2 but the idea here is to quickly deliver as much damage as possible, this is not a weapon for prolonged gun fights.

  • In Canada it does not seem you can get pepper balls easily most likely due to import regulations.

Comments:

The Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol is a very refreshing product for us here in Canada as up until now similar styled Rubber Ball purpose built self defense products we have been able to get, in my opinion simply did not have enough power to really be effective other than the initial intimidation of holding what looks like a firearm. If it came down to actually shooting it, I don’t believe there would be enough stopping power to deter an intruder. The Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol on the other hand has a 485 fps, 13 Joules power rating which is a rather big jump from other similar products available to us here in Canada and although it may not stop everyone, I do believe you have a much better chance protecting yourself with the Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol. If you are looking for something to have at home to help you feel a bit safer, then the Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol is the absolute best option for Canadians at this time.

Categories: .50 cal, CO2, Comparison, Paintball, Pistol, Review, Semi Auto, Vimeo Video Tags: Umarex, T4E, HDR 50, Less Lethal

Umarex Markpoint Break Barrel .177 Cal Pellet Pistol Field Test Review

No Comments

In this Field Test Shooting Video conducted in the Replica Airguns Sea Can indoor Shooting Range, I test the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol’s power in velocity using my Chronograph along with the accuracy shooting at a Paper Target setup 30 feet away. If you are also interested in details, specifications and more close up video of the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol, then make sure to watch my Table Top Video I already made for it here

When I placed 6 pellets from the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol through my Chronograph, I removed the fastest and slowest recorded shots, and got an average of 290 fps, there was a fairly big range in fps as some dieseling may have been occurring, since this Pellet Pistol had not been shot before and there may have been some oils in the barrel. Here are my recored velocities for all 6 shots: 213, 286, 308, 270, 304, 298. I was using lead flathead pellets that weighed 8.2 grain each. So you will for sure get much higher velocities using 5 grain alloy pellets, probably very close to the 400 claimed fps.

Moving on to my accuracy test, the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol did pretty good. I was not sure how it would shoot for me as the trigger is pretty firm, which can cause the shooter to pull a shot or two. I was able to keep my shots pretty consistent with perhaps one shot getting a bit away from me. That said, out of the 10 shots I placed on the paper target setup 30 feet down range, I managed to get 9 of them all within about 2 inches of each other with the larger spread being elevation, windage was within about 3/4 of an inch, so consistent velocity may have played a roll here. I did use a semi rested shooting position with my hands resting on a sand bag up front, and sitting on a stool in the back to help stabile me as much as possible. I was happy that out of the box the aim point was pretty well centered just a bit to the right if anything.

All in all the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol performed as much as I could have expected for a $50 Canadian low cost pellet shooter. I really wish an add on sight of some sort was possible, as there does not seem to be anyway of adjusting the sights on the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol, so hopefully yours shoots well centered for you also. I do not recommend this Air Pistol for people with smaller hands as it is a bulky Airgun with very wide and large grips. The trigger also does take a bit of finger strength so not a gun for younger shooters perhaps. For the price it is a very unique Pellet Pistol with a very modern and futuristic look to it which may or may not appeal to everyone.

Categories: 4.5mm / .177 cal, Field Test, Pellet, Pistol, Review, Single Shot, Spring Piston, Vimeo Video, Break Barrel Tags: Umarex, Markpoint

Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle FIeld Test Review

No Comments

In this Field Test Shooting Video for the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle, I get to test out a Replica .22 Caliber CO2 Rifle which I don’t get the chance to do so very often and .22 caliber combined with a Replica in a an Airgun is very uncommon! Well today I got to test one out and it was a lot of fun, I would say it performed very well for me. As usual, my main goal is to find out what the real world velocity is in fps and also to see how accurate the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle is shooting at a paper target 30 feet away. Also make sure to checkout my Table Top Video for the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle for more details and specifications and close up video.

First in my to-do list was the velocity portion of my Field Test, and so I loaded up dual 12 gram CO2 cartridges into the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle along with 10 preloaded .22 caliber shells. By the way I was using Gamo 15.43 grain (1 gram) lead pellets and the temperature was just a bit below room temperature, so not 100% ideal for maximum velocity but still warm enough for my purposes. The Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle shot an average 5 shot velocity of 390 fps with the fastest shot hitting 411 fps and the slowest performer hitting 370 fps. That works out to 5.78 average foot pounds of energy.

Next up, I first recovered the 5 ejected shells I used in the velocity test, and again reloaded them with some more pellets and then back into the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle for my accuracy test. Keep in mind with a lever action rifle, I have to remove the rifle from my shooting position each time to work the lever action and chamber a round. This does cause me to have to fully reset for each shot which does kind of break a shooting grove just a bit, but it did not seem to make much of a difference as my accuracy results where still very good. I did notice vertically the grouping was about 2 inches while side to side it was closer to 1 inch. I attribute this to the sighting system as it was hard for me to focus on the rear sight and make sure I had it perfectly level with the front sight for each shot, which would account for some variation in elevation. The Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle was also shooting about 2 inches high from my aim point.

I have said this a bunch of times before, but I do really love shooting lever action rifles. Even a low cost Red Ryder BB Rifle brings a smile to my face. I also have a Henry Lever Action 22LR that I also really enjoy shooting when I get the chance. The Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle is a really sweet looking rifle that performs as good as it looks thankfully! It’s also well priced for what you get in my opinion at just under $300 Canadian at the time of this video. If you want a fairly powerful Replica Air Rifle that hits hard and true and is super fun to shoot then get this one but make sure to get a bunch of extras shells cause they like to disappear on you pretty quickly. For now I still have all 10 of mine but they love to hide in the craziest places when they get ejected :)

Categories: .22 cal, CO2, Field Test, Pellet, Review, Rifle, Vimeo Video Tags: Barra, Barra 1866

Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle Table Top Review

No Comments

Type: CO2 Pellet Rifle.
Manufacturer: Barra.
Model: Barra 1866 Lever Action.
Materials: Mostly plastic/some metal.
Weight: 6.5 pounds 2.9kg).
Total Length: 38.5 inches (90.7cm).
Barrel: 18.75 (47.6) barrel rifled.
Propulsion: Dual 12 gram CO2.
Action: Lever Action SAO.
Ammunition Type: .22 Caliber Pellets.
Ammunition Capacity: 30 round magazine.
FPS: 410 fps.

Trigger Pull: The trigger pull on the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle is light short and crips with just a little bit of take-up before it releases. You will have to first either work the lever action which also chambers a preloaded shell into the breach of the barrel, or you will have to pull the hammer back in order for the trigger to be active as a single action trigger.

Accuracy: At this time I have not made my Field Test Shooting Video or shot the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle. I am really looking forward to testing it out when I make my Filed Test Shooting Video Review for it hopefully soon! Barra claims is will shoot .22 caliber pellets up to 410 fps. I am not sure if this is for mid grain or light grain pellets but we will find out again when I make my shooting review video. The rear sight does have three positions of elevation so I should be able to find one that works here my Indoor Sea Can Airgun range where I setup paper targets at 30 feet away. I am hoping the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle shoots close to the bullseye out of the box as it does not have any windage adjustment to space of.

Build Quality: The Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle seems to very well built and has a lot theft to it weighing in at 6.5 pounds so it feel very solid to hold and shoulder. It is mostly all metal which from what I can see, only the stock is plastic rather than actual wood. The faux wood does look very real and unless you get in close to it and notice none of the real wood imperfection, then you can figure out it is emotion wood. The fit and finish is all quality and I expect the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle to perform reliably.

Realism: The Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle is based on the Winchester 1866 Lever Action Rifle and does look the part with all the expected working parts found on a lever action rifle. Barra has included a thumb safety behind the hammer along with a grip safety that requires the shooter to hold the lever tight to the stock or you will not be able to pull the trigger. Being a shell loading design that requires preloading pellets into the shells and then loading those shells into the rifle tub magazine also makes the experience feel very real. Barra has done a great job hiding the CO2 being the butt plate and the barrel open is about the diameter of a 45 caliber bullet.

Pros:

  • Not many rifles come in .22 Caliber. Should have a bit more down range power over .177 caliber.

  • Almost all metal construction with good weight and feel to it.

  • The Faux Wood stock looks very realistic, hard to tell it’s plastic!

  • Octagonal recessed barrel adds to realism.

  • White writing is mostly under the barrel so fairly discreet.

  • The gold receiver and but plate add to the look of quality.

  • Rear sight has three positions for different ranges and sighting types (standard low, peep mid, high distance).

  • Also have the option of mounting a red dot or magnified optical sight on the rear compact picatinny rail.

  • Dual 12 gram CO2 system is less expensive and reduces the cool down effect while allowing for lots of pellet reloads between heaving to change the CO2.

  • Has a secondary safety on the lever, it must be pressed into the stock to shoot, kind of like a grip safety.

  • Claimed 410 fps should be more than sufficient for mid range shooting.

  • Lever action rifles are just so much fun to shoot!

Cons:

  • Rear sight is not adjustable for windage.

  • More than likely going to lose some shells if you are shooting outside in the yard as they all eject into the grass or who knows where? Will probably need to buy some backup shells over time.

  • You will have to hold the lever snug to the stock or the trigger will not work.

Comments:

I was super excited this year at SHOT Show when I went to the Barra Booth and the Barra Team showed me their new Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle. We also spoke about how the .22 caliber version shoudl be Canada friendly as it was under 500 fps. Here we now and I finally got my hands on one and it is nice to have a .22 Caliber Replica CO2 Lever Action Rifle available to us Airgun Collectors. Sure Umarex has their Legends CO2 Shell Loading BB Rifle but I like The Barra 1866 shooting pellets over BB’s. Price point for the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle is very reasonable for what you get as it is a lot of gun for the money. I am really looking forward to seeing how well it shoots and if it can get close to the claimed 400 fps.

My Vimeo Table Top Review for the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle:

Categories: .22 cal, CO2, Pellet, Review, Rifle, Vimeo Video Tags: Barra 1866, Barra

September 2024 Another Mystery Box Unboxing Video

No Comments

Here we go with another unboxing video this month, and this is a big box, so no doubt the mystery items are going to be big too! As always with new products, I will be following up with dedicated Table Top and Field Test Videos for each of them so make sure to check down the road for those videos for a lot more information and actual performance results…

Don’t look below if you want to just watch the video and be surprises by what’s inside the mystery box but if you want a quick peak before hand then checkout the basic specs below for all three new items I will be reviewing soon.

Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle

  • ManufacturerBarra Airguns

  • Caliber: 0.22

  • Powerplant: CO2

  • Action: Lever

  • Loudness: Level 2

  • Max Velocity: 450 fps and above

  • Shot Capacity: 10

  • Weight: 6.5 lbs

  • Barrel Length: 18 inches

  • Total Length: 38.5 inches

  • Stock: Faux Wood

  • Barrel: Smoothbore

  • Sound Suppression: No

  • Trigger: 3 lbs

  • Safety: Manual and Grip

  • Optic Mount: Picatinny mount

  • Recommended Use: Plinking

Umarex HK 416 A4 GBB Airsoft Rifle

  • Type: Airsoft Rifle

  • Manufacturer: Umarex / KWA (Licensed by H&K)

  • PropulsionGas Blowback

  • Caliber: 6mm plastic Airsoft BB's.

  • Muzzle Velocity: 400~ FPS (Measured with 0.20g BBs)

  • Magazine Capacity: 30~rds

  • Gas Type: Green Gas, Propane

  • Fire Modes: Semi / Full-Auto / Safety

  • Hopup: Yes, Adjustable

  • Inner Barrel: 390~mm

  • Length: 790mm - 875mm

  • Weight: 2900g

  • Package Includes: Gun, Magazine, Manual

G&G RK Beta AK AEG Airsoft Rifle

  • Type: Airsoft Rifle

  • Manufacturer:G&G Armament

  • Model: RK Beta

  • Materials: Metal and PlasticWeight:

  • Barrel: Smoothbore

  • Power Source: Electric (Battery)

  • Action: Semi-Automatic/Full-Automatic

  • Ammo Type: Airsoft BBs 6mm

  • Ammo Capacity: 600 Rounds

  • FPS:390

Categories: 6mm, .22 cal, AEG, Airsoft, Blowback, CO2, Full Auto, Gas, GBB, Pellet, Review, Rifle, Semi Auto, Vimeo Video Tags: Umarex, Barra, G&G, HK416, AK-47, RK Beta, Barra 1866

EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol Table Top Review

No Comments

Type: GBB Airsoft Pistol.
Manufacturer: Distributed by EMG.
Model: SAI 2011 DS 4.3.
Materials: Mostly metal (Aluminum) and plastic.
Weight: 1.94 pounds (878 grams).
Total Length: 8.25 inches (210mm).
Barrel: 4 inches (102mm) metal rifled.
Propulsion: CO2 x1.
Action: Semi auto Blowback, SAO trigger.
Ammunition Type: 6mm Airsoft BB’s.
Ammunition Capacity: 30+1.
FPS: Claimed 380-430.

Trigger Pull: The trigger pull on the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol like what you would find on a traditional 1911 style pistol so it is Single Action Only and is nice and short and light in weight. Being a single action pistol for your first shot you will need to pull back the slide to chamber a round into the barrel which will also cock the hammer for you. the blowback action will cycle the slide for you from that point on automating the action.

Accuracy: I have not made my Field test Shooting Video or even tested out the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol yet or even shot it at all so I can not comment on the performance other than the claimed velocity of (380-430 fps) which does seem a bit high to me? My plan is to have this info available next week when I make my Field test Shooting Video so stay posted of that video coming out shortly…

Build Quality: The EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol is a well made Airsoft Pistol with quality materials throughout. You will find a machined aluminum slide an aluminum frame and a full metal drop out magazine. The barrel is Titanium Nitride Coated and the only real plastic parts I could find would be the grips, the gas tube and the hop-up wheel. The stainless coating on this Airsoft pistol looks fairly thick and so should stand up over time with less wear showing.

Realism: The EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol to me is not a true 2011 design as it does not have the once piece grip/trigger guard design found in 2011 pistols. It is double stack so that fits with the naming convention but I would say it is more like a combination of the Salient Arms SAI Red and SAI Red H. It does check all the boxes for realism in terms of function, looks and feel with all the working parts you expect on a Replica Airsoft Pistol including being able to fully field strip it.

Pros:

  • Superior Performance and 1:1 Scale Functionality.

  • Machined Aluminum Alloy Frame and Slide.

  • Rugged Reliability without sacrificing Weight.

  • Officially licensed by Salient Arms International.

  • Front and Rear Combat Style Sights with integrated Forward Fiber Optic.

  • Machined Anti-Glare Slide Top.

  • Ambidextrous Safety and Squared Trigger.

  • Titanium Nitride Style SAI Barrel for added durability.

  • On-Frame Integrated Accessory Rail.

  • Skeletonized trigger and hammer.

  • Options of both Green Gas and CO2 Magazines.

  • Deep Engraving with Real Steel Training Weapon Grade External Finish, Look, and Feel.

Cons:

  • Has orange barrel tip. But can be removed with some work.

  • No white dot or fiber optics on rear sight.

  • Not really a True 2011 in design as the name suggests.

Comments:

I am a huge 1911/2011 fan and so the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol really appeals to me. I like the compact design of the EMG SAI 2011 DS 4.3 yet it has a nice high capacity double stack magazine that gives this Airsoft Pistol a bit more girth in the hands which for me is OK as I have pretty large hands. I like that you have the option of shooting CO2 or Green Gas depending on what magazine you are using. This version comes with a CO2 Magazine, but you can purchase a green gas magazine if you prefer using gas over CO2. I like the modern look with the gold barrel and skeletonized trigger and hammer. The price is on the higher side but sometimes you have to pay a little bit more to get the additional quality and to have a gun that really stands out.

Categories: 6mm, Airsoft, Blowback, CO2, Comparison, Pistol, Review, Semi Auto, Vimeo Video Tags: EMG, SAI 2011 DS 4.3

September 2024 Mystery Box Unboxing Video

No Comments

In this Mystery Boxing Video I get to take a look at 4 new Airgun Products and give you my first impressions along with a few specifications about each of them but not in a lot of details as I have not had an opportunity to research any of them as this my first time seeing them.

First out of the Mystery box is a new Umarex T4E .43 Caliber CO2 Blowback Paintball Pistol with Walther licensing called the Umarex T4E PDP. I have reviewed similar styled T4E .43 caliber CO2 Blowback Pistols in the past and this one should perform and function similarly.

The next Airgun I pulled out out of the box was the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol, a really nice 1911 styled Airsoft Pistol with a stainless finish and gold barrel with a CO2 Magazine. This one looks and feels really nice.

Staying with the pistols that came in this Mystery Box, I got my first look at the Umarex Markpoint .177 Caliber Break Barrel Pellet Pistol that has a bit of a utilitarian look and feel to it. This one is the longer barrel version and has a claimed fps of 395 using alloy pellets so we will see what it can get with more traditional lead pellets when I make my Field Test Video for it down the road a bit.

The last item out of the Mystery Box was another Umarex product, a fun CO2 BB Rifle with H&K licensing called the HK416. This semi auto and 6 round Burst internal Blowback CO2 BB Rifle is a lot like the Steel Storm and Steel Strike from Umarex but a little bit larger I would say and with H&K Licensing so more of a true Replica Airgun.

I will be making full Table Top and Field Test Videos for all of these items shortly so keep an eye out for those videos but for now you can at least get an idea what these Airgun Products will offer.

Umarex T4E PDP Compact Walther .43 Cal CO2 Blowback Paintball Gun

  • Type: Paintball gun

  • Model: T4E Walther PDP

  • Materials: Durable polymer and matte finish

  • Power Source: CO2

  • Weight: 690 g (1.52 lb)

  • Barrel: 4 in

  • Action: Semi-automatic, single-action, blowback

  • Ammo type: Paint, dust, and rubber .43 caliber ammo

EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol

  • FPS Range: 380-430

  • Dimensions: 205mm x 150mm

  • Holster Compatibility: EMG SAI 2011 pistols feature a slightly wider frame and may not fit some TM/WE compatible 2011 holsters

  • Magazine: 30+1 rounds.

  • Gas Type: CO2

  • Firing Mode: Semi Automatic, Safety

  • System: Gas Blowback

  • Hopup: Yes, Adjustable

  • Package Includes: Gun, Magazine, and Manual

Umarex Markpoint Break Barrel .177 Cal Pellet Pistol

Caliber: .177 caliber that ensures accuracy and precision.

  • Stock Finish: Boasting a sleek black polymer finish, exuding a modern and tactical style.

  • Type: a lever cocking mechanism for swift and efficient operation.

  • FPS: With an impressive velocity of 425, delivers powerful and precise shots with every trigger pull.

  • Overall Length: Exhibiting a compact design with a total length of 10.8 inches, perfect for various shooting scenarios.

Umarex HK416 CO2 Blowback Burst BB Rifle

  • Type: BB Rifle

  • Manufacturer: Umarex

  • Model: Heckler & Koch HK416

  • Materials: Metal and Polymer

  • Weight: 6.2 lb (2817 g)

  • Power Source: 2x 12g CO2 cartridges

  • Action: Semi-auto and 6-shot burst

  • Ammo Type: 4.5mm Steel BBs

  • Ammo Capacity: 36 Rounds

  • FPS: up to 450

Categories: 4.5mm / .177 cal, .43 cal, 6mm, Airsoft, BB, Blowback, Break Barrel, CO2, Full Auto, Paintball, Pellet, Pistol, Review, Rifle, Semi Auto, Single Shot, Spring Piston, Vimeo Video Tags: Umarex, EMG, SAI 2011 DS 4.3, HK416, H&K 416, T4E PDP, Walther, Markpoint

Airgun Safety 101

No Comments

Airguns are not toys and as so require proper storage, transportation and handling so as not to cause an accident that could be minor or even deadly.

No matter if you are handling an Airgun or a “Real Gun”, they should both be handled in the same manner even if the consequences from an accident with an Airgun may be less serious. Life long injuries like the loss of an eye are nothing to be taken lightly.

For the most part, what I talk about in this Airgun Safety 101 video can also be applied to a “Real Gun” although most countries will have stricter laws and guidelines in the storage, transportation and handling of “Real Guns” over an Airgun.




Storing Your Airgun:

In Canada an unregulated Airgun does not have any real specific safe storage guidelines but common sense should be used and I recommend that you at the bare minimum keep your Airgun in some sort of locked space whether it be a safe, cabinet or room that is locked all of the time.

You can also put a trigger lock on your Airgun if you do not have a lockable storage location for it.

You should also make sure to store your Airgun unloaded, at least when it comes to BB’s and or Pellets. If there is some unused CO2 in it, or it is charged with Compressed Air, but unloaded in terms of ammunition, that is OK, but again keep it in a safe location away from anyone that may be able to get their hands on it and hurt themselves or others.




Transporting Your Airgun:

Again, in Canada an unregulated Airgun does not have any real transportation guidelines but if you keep your Airgun out in the open and someone sees it, they will most certainly call the police and more than likely you may find yourself staring down the wrong end of a police firearm, at least until they sort it all out. This is very serious as unfortunately people have died as a result of handling their Airguns out in the open and underestimating what kind of police response that may entail.

For that reason alone, always keep your Airgun out of sight in a case or backpack or the trunk of your car. Never transport your Airgun loaded and it is best if you can lock it in a case or put a trigger lock on it for added safety when transporting it.



Shooting Your Airgun:

Shooting your Airgun is always the most enjoyable part of owning an Airgun, so don’t do something stupid and turn that experience into a nightmare. Treat your Airgun as if it is deadly at all times, never point it at anything you do not intend on shooting.

Keep your safety on until you are ready to shoot. Never put your finger on the trigger until you are ready to shoot it and only shoot it in a safe location with an appropriate background and backstop.

Think of the barrel of your Airgun as a light saber that if it crosses even your arm, it could cut it off. Even a BB to the arm is a serious matter. I had a friend that shot himself in the arm with a BB Gun and the BB lodged in the tendons of his wrist requiring an operation to remove it. He was a violin player so this could have ended his violin playing, but luckily he was OK.

When Your finger is not on the trigger it should be held across the trigger guard in a straight position to ensure no accidental misfires.

Wear eye protection, Steel BB’s will bounce back when they hit a hard surface and can come back with enough force to injure an eye easily. Generally Airguns do not require ear protection but some can be loud enough that you may want to wear some sort of ear protection as a precaution.

Only shoot with others that are responsible and take Gun Safety very seriously. Young people will need constant supervision and it is best to go through all of this first before even considering handing them an Airgun for the first time. Perhaps start them off with something like an Airsoft gun which will have less consequences if an accident were to take place.

Airguns are awesome in so many ways and allow for a similar shooting experience to a “Real Gun”. They can be used in more situations, with less overall cost and are a great way to learn proper gun handling and how to improve your shooting ability even if you are a “Real Gun” owner. Always be responsible with your Airgun not only for yourself but for others as it only takes a few idiots to ruin things for the rest of us. Don’t be that Idiot please!

Categories: Airsoft, BB, Blank Gun, Gun Law, Gun Safety, How To, Pistol, Pellet, Paintball, Real Gun, Vimeo Video Tags:

Gamo GP-20 Combat CO2 BB Pistol Table Top Review

No Comments

Type: NBB CO2 BB Pistol.
Manufacturer: Distributed by Gamo.
Model: P-20.
Materials: Plastic & metal.
Weight: .97 pounds (439 grams).
Total Length: 7.25 inches (184mm)
Barrel: 4.25 inches (108mm) metal non-rifled.
Propulsion: CO2 x 1.
Action: Semi auto NBB, double action only trigger.
Ammunition Type: 4.5mm steel BB's.
Ammunition Capacity: 20 round metal stick magazine.
FPS: Claimed 400.

Trigger Pull: The trigger pull on the Gamo GP-20 Combat CO2 BB Pistol is the same as pretty much all of the DOA trigger low cost BB Pistols where the trigger has to do all the work. Much of which is pulling back the fairly strong internal hammer spring which in this case is the barrel which protrudes slightly out of the front of the pistol until you reach the release point, and it snaps back hitting the valve and pressurizing the Airgun. This will give you a bit of a finger workout if you are shooting fast and want to empty out the 20 round magazine.

Accuracy: At this point I have not tested or shot the Gamo GP-20 Combat CO2 BB Pistol but I plan on making my Field Test Shooting Video the following week so stay posted for that. I do expect it to perform nearly exactly live every other Airgun made like this, and there are many that essentially have all the same internal components with a slightly redesigned outer shell, so mechanically they are all the same and should shoot about the same. It should get really close to the claimed 400 fps and I expect it to shoot under a 2-3 inch grouping, unless I am having an off day.

Build Quality: The build quality of the Gamo GP-20 Combat CO2 BB Pistol is what you expect from almost all plastic BB Guns of this type. It is not super heavy but that means less can break when dropped on a hard surface. Fit and finish are good and one gripe I have with most of these types of BB pistols built the same way, is that the grips are a bit lose so it can pop off when you pull it back. The Gamo GP-20 Combat’s grips are a lot more solid and this does help make the Airgun feel a bit more confidence inspiring.

Realism: The Gamo GP-20 Combat CO2 BB Pistol from what I can see is not an exact copy of a real steel pistol in production but it does look like a modern semi auto pistol in design. The barrel is slightly recessed, and the CO2 tab is also hidden inside the grips, so unless you get close to the pistol you would think it could be the real deal. That said some giveaways are the moulded into the slide ejection port and the screw holes on the right side of the two plastic halves of the Airgun along with the kind of out of place standard safety switch that looks more like something you would find on a piece of electronics.

Pros:

  • Very low cost and simple design will make it reliable.

  • Fit and finish looks decent for an all plastic gun, grip are actually pretty tight.

  • Picatinny rail for adding accessories like a laser or tac light.

  • Standard metal stick magazine found in lots of Airguns for cross compatibility.

  • Right hand screws are very small and less obvious then some other two sided low cost plastic Airguns.

  • White dot sight up front and fiber optic in the back are easy to see on all backgrounds..

  • Safety is right above the trigger finger so easy to switch if you are right handed.

  • Recessed barrel for added realism.

Cons:

  • Some more metal would have been nice, but typical of a low cost BB shooter like this.

  • Double action trigger does require some work, so action shooting will be a bit harder.

  • Not a lot of working parts other than the trigger, safety, and magazine release.

Comments:

I have reviewed many CO2 BB Pistols built exactly like the Gamo GP-20 Combat CO2 BB Pistol, so it is at least for me, not the most exciting Airgun review but I always enjoy the chance to shoot even the most basic of Airguns. I would say the Gamo GP-20 Combat CO2 BB Pistol in this category is one of the nicer options as I feel Gamo stepped up the build quality just a bit, even if it was just to make the grips feel more solid and less prone to popping off when loading CO2. It is a little bit beefier than similar CO2 BB Pistols in this category so maybe not the best for smaller handed individuals but good for someone like me with larger mitts. The price is right for sure and with its simple design, it should perform as expected for a good long time!

Categories: 4.5mm / .177 cal, BB, CO2, Comparison, Pistol, Semi Auto, Vimeo Video Tags: Gamo, GP-20

Barra 1866 Junior Dual Ammo Pump Cowboy Rifle FIeld Test Review

No Comments

What you can expect from this Field test Shooting Video for the Barra 1866 Junior Dual Ammo Pump Cowboy Rifle are two things for sure. I test out the velocity with both 4.5mm Steel BB’s and .177 caliber lead pellets, I also chuck both of these rounds downrange to see if one may be more accurate than the other and how close I can get a 5 shot grouping for each ammunition type. If you are looking for details and specifications and perhaps some more close up video of the Barra 1866 Junior Dual Ammo Pump Cowboy Rifle then you may want to watch my Table Top Video for it here.

If you have watched any of my hundreds of Field Test Videos, then you already know I start off shooting 5 or so rounds through my Chronograph to see what the average velocity is going to be. In this Field Test I shoot 3 rounds of each ammo type, 3 BB’s and 3 pellets since it is a pump Airgun and they tend to be more consistent than a CO2 Airgun. Barra claims around 350 fps, I am not sure if this is for BB’s or Pellets or both? As it turns out (spoiler alert), both ammo types performed about the same in both the velocity and accuracy portion of my testing. For BB’s, my chronograph testing got 303, 316 and 316 for an average of 312 fps. For pellets my chronograph results were 309, 309, 314 for an average of 311, so only 1 fps off between the two. Keep in mind the BB’s weigh around 5.1 grain while the pellets I was using were around 7 grain, so the pellets will be carrying more energy downrange and hit a bit harder. By the way they are also harder to load so I would suggest just shooting the steel BB’s in this one since you can keep the fun times flowing better...

Next up for my accuracy test of the Barra 1866 Junior Dual Ammo Pump Cowboy Rifle, I again shot both ammo types, but 5 rounds of each and just like the velocity test they matched each other almost exactly. Both the steel BB’s and lead pellets I was using shot really well centered left to right, maybe just a hair to the left and both shot just about an inch or so high on the bullseye I was aiming at 30 feet away. The 5 BB’s grouped nicely for me at about an inch while the pellets did get a slightly tighter 3/4 inch grouping for me in this test. I was using a semi rested shooting position sitting on a stool in the back with the rifle rested on a sand bag up front.

The Barra 1866 Junior Dual Ammo Pump Cowboy Rifle really surprised me in how it performed, It’s not going to be the most powerful BB/pellet cowboy rifle out there but compared to a Red Ryder it does have a bit more punch and in terms of accuracy I found it shot better for me than at least I can do with a Red Ryder type BB rifle. You also have the option of shooting BB’s or Pellets but I would recommend shooting BB’s since you have that 50 round hopper and the BB’s auto load when you pull the bolt back which is much easier than loading pellets with a pair of tweezers which is what I needed to do to get them in with my sausage fingers. One more thing to mention is I do not recommend pumping this air rifle more than 1 time, not only does the manual say not to, but there is little benefit in pumping it more times with only the risk to damaging the airgun. I pumped it 4 times and only got about 20 fps more out of it so just don’t do it. If you want a Cowboy style Air Rifle with a little more realism than say a Red Ryder but that shoots about the same then checkout the Barra 1866 Junior Dual Ammo Pump Cowboy Rifle.

Categories: 4.5mm / .177 cal, BB, Field Test, Multi-pump, Pellet, Review, Rifle, Single Shot, Vimeo Video Tags: Barra, Barra 1866

Barra 1866 Junior Dual Ammo Pump Cowboy Rifle Table Top Review

No Comments

Type: Lever/Pump Dual Ammo Rifle
Manufacturer: Distributed by Barra.
Model: Junior Dual Ammo Pump Cowboy Rifle.
Materials: Mostly plastic, some metal.
Weight: 4.1 pounds (1859 grams).
Total Length: 36 inches (91.44mm).
Barrel: 18 inches (45.7cm) metal rifled.
Propulsion: Pump Compressed Air.
Action: Lever/Pump
Ammunition Type: .4.5mm steel BB’s & .177 Caliber Pellets.
Ammunition Capacity: 50 BB’s in hopper, single shot Pellets.
FPS: Claimed 350-400.

Trigger Pull: The trigger pull on Barra 1866 Junior Dual Ammo Pump Cowboy Rifle is respectable at about 5 pounds with a medium to short pull length. I would say it is perfect for novice shooters as it is not overly light so as not to go off easily by accident and not too heavy for youth shooters with less finger strength than adults. When you pull the bolt back to reload the ammo, the internal cocking mechanism is activated allowing for single action type shooting. You do need to activate the bolt with each shot.

Accuracy: My dedicated field test shooting video is planned for this week, so for now I have no idea what to expect in terms of velocity and accuracy from the Barra 1866 Junior Dual Ammo Pump Cowboy Rifle, other than it is claimed to shoot around 350 fps when using pellets. It does have an 18 inch rifles barrel which should contribute to helping a lot with accuracy, so I do have high expectations especially since it has a pretty good trigger and when looking down the sights they allow for a nice tight fix on the target. The rear stock is short but not so short that it feels cramped for an adult shooter which should also help when I perform my accuracy test.

Build Quality: The Barra 1866 Junior Dual Ammo Pump Cowboy Rifle is nothing special when it comes to materials being used in it. It is for the most plastic with the exception of the inner and outer barrel along with the rear sight and I would imagine some other internal parts. It does feel not so bad as it is a bit over 4 pounds and is smaller in nature so it feels solid enough in the hand. I wish the Pump/Lever was metal as it would of felt a bit more solid and would have added a bit more additional weight to the Barra 1866 Junior Dual Ammo Pump Cowboy Rifle. Fit and finish is good and overall the gun looks and feels good.

Realism: The Barra 1866 Junior Dual Ammo Pump Cowboy Rifle is essentially styled after the Old West Lever Action Cowboy Rifle, and it has everything we would expect other than loading shells which is available in other Lever Action Air Rifles if you don’t mind paying a premium for one. The lever is actually not a lever but more of a pump so the action and look of the lever is not exactly as you would expect from a true lever action rifle, but when it is locked in place it does look the part. The gold receiver and rifle band looks sharp and I feel matches up with the dark imitation wood stock nicely. One point to make is that the hammer is not the hammer but actually the safety and the bolt not only opens the breach area but also acts as the cocking mechanism for the internal hammer.

Pros:

  • Super easy to pump.

  • Fit and finish looks decent for a mostly plastic airgun.

  • In terms of realism it does look like a more compact lever action rifle for the most part

  • Can shoot either BB’s or Pellets.

  • Holds 50 BB’s in the hoper for quicker follow up shooting.

  • Metal octagon outer barrel adds addition weight to a mostly plastic gun.

  • Rear sight is metal and is also adjustable for elevation.

  • Trigger pull is pretty decent, not too light but is short and about 5 pounds.

  • Recessed barrel for added realism.

  • Made for kids but the shoulder pull length and sight placement works for adults too.

  • The gold receiver looks good and gives it a unique look.

Cons:

  • Mostly plastic build.

  • Manual says only one pump but I wonder why this is the case or perhaps just to deregulate it?

  • Pellets are hard to load especially if you have larger hands and fingers.

Comments:

The Barra 1866 Junior Dual Ammo Pump Cowboy Rifle is a competitor for products like the Red Ryder but it has a bit more realism in terms of looking more like a replica of a real steel Lever Action Cowboy Rifle. It also allows for shooting pellets and has an actual rifled barrel so hopefully this helps with accuracy. You can still kind of shoot it Lever Action Style when shooting BB’s but there is the addition of charging the bolt with each shot over and above working the Lever / Pump, so it will take a bit more time to get those follow up shots as compared to a Red Ryder BB Rifle. One other point to make is that the lever is actually not a lever but more of a pump since this is not spring powered but instead has an air reservoir which on this version only allows for one pump, but on the non-junior version you can pump it up to 10 times and get a claimed 800 fps out of it (US Version). I am going to try pumpkin the Barra 1866 Junior Dual Ammo Pump Cowboy Rifle up to three times to see if there is any difference in power but this could void your warranty if you damage the air reservoir by over pressuring it. So be good and only pump yours once as instructed in the manual.

Categories: 4.5mm / .177 cal, BB, Pellet, Review, Rifle, Single Shot, Vimeo Video, Multi-pump Tags: Barra, Barra 1866

Cybergun Thompson 1911 CO2 NBB Pellet Pistol Field Test

No Comments

In this shooting velocity and accuracy Field Test Video of the Cybergun Thompson 1911 CO2 NBB Pellet Pistol, I “try to” test out what the velocity in fps using a standard 12 gram CO2 along with 7 grain .177 caliber lead pellets shooting 5 rounds through my Chronograph. The claimed fps for this pellet shooter is 332, not sure if that is with lead or alloy pellets? I then setup a fresh paper target 30 feet down range here in the Sea Can and shoot 6 rounds into it using a semi rested shooting position to find out if the Cybergun Thompson 1911 CO2 NBB Pellet Pistol can get all 6 rounds out the barrel and if it can place them any where near the bullseye out of the box. And if it can also get a decently tight grouping. If you have not already watched my Table Top Video Review for the Cybergun Thompson 1911 CO2 NBB Pellet Pistol, then make sure to check that one out for details, specifications and some nice close up 4k video. It is a pretty sweet looking Airgun!

First, my velocity test of the Cybergun Thompson 1911 CO2 NBB Pellet Pistol, I “try to shoot” 6 rounds through my Chronograph and then averaged them all out as I do in all my Field Test Shooting Videos. I did not have a lot of success with my first choice of pellets and pretty much got a jam right away. I then switched up the pellets and I was able to get 5 out of the 6 rounds in the one side of the rotary mag through my Chronograph and here where the results… The slowest shot was 206 fps while the fastest shot hit 251 fps, this averaged 231 fps which was kind of far off of the claimed 332 fps. Maybe the claim is for light weight alloy pellets? I don’t know? To be honest I was just glad to get a result as I was not having a lot of luck with the rotary magazine working for me all that well.

I then tried my luck again and placed a fresh paper target 30 feet downrange and using a semi rested shooting position (hands rested on a sandbag up front and sitting on a stool in the back). Luck was on my side as a succeeded to place all 6 rounds into the target with no jams this time! The Cybergun Thompson 1911 CO2 NBB Pellet Pistol did alright in terms of accuracy placing 4 shots all within about an inch and a half well centered just a bit high of the bullseye. Two shots did drop down as they seemed to come out underpowered compared to the other 4 shots which does explain why they dropped a bit on the target. This did stretch out the grouping to closer to around 4.5 inches.

Rotary pellet magazines are for sure never as consistent as vertical stick type magazines shooting round BB’s. There is always going to be some jamming that happens especially if the pellets you pick do not fit perfectly. Once I found a pellet the Cybergun Thompson 1911 CO2 NBB Pellet Pistol liked a bit more, I did have better success with only the occasional jam. Power was not great as you saw with my velocity test. Accuracy was for sure much better and if the velocity was more consistent then I am positive 1.5 to 2 inch groupings would be possible! The trigger is OK but loaded up with pellets does tend to drag a bit more than when empty and make you work a bit harder with that trigger finger, but it does get the job done. The best part about the Cybergun Thompson 1911 CO2 NBB Pellet Pistol would be its looks and how it feels in the hand for sure, the stainless finishes gives it a quality look so if looks are more important than performance and you want a sweet looking stainless 1911, this may be your pick.

Categories: 4.5mm / .177 cal, CO2, Field Test, Pellet, Pistol, Review, Semi Auto, Vimeo Video Tags: Cybergun, M1911, Thompson Custom 1911

Cybergun Thompson 1911 CO2 NBB Pellet Pistol Table Top Review

No Comments

Type: Non-blowback CO2 Pellet Pistol.
Manufacturer: Distributed by Cybergun.
Model: Thompson 1911
Materials: Metal and plastic.
Weight: 2.18 pounds (990 grams).
Total Length: 8.66 inches (220mm).
Barrel: 4.75 inches (121mm) metal rifled.
Propulsion: CO2 x 1.
Action: Semi auto non-blowback, DOA trigger.
Ammunition Type: .177 caliber pellets.
Ammunition Capacity: 12 (6x2) round drop out metal magazine.
FPS: Claimed 332.

Trigger Pull: The Cybergun Thompson 1911 CO2 NBB Pellet Pistol is typical of a double action trigger in that it is a longer trigger pull that requires more effort to pull than a single action trigger would. The Cybergun Thompson 1911 CO2 NBB Pellet Pistol trigger is good for a DOA trigger as it is not overly heavy and does allow for somewhat quick follow up shooting. The trigger pull not only cocks the hammer, it also rotates the rotary magazine on either end of the stick magazine so there is a lot going on here but it still is not overly heavy which is nice.

Accuracy: I have yet to shoot the Cybergun Thompson 1911 CO2 NBB Pellet Pistol or performed my standard Field Test shooting Video so I can not comment at this time on the performance other than what is claimed in terms of fps (332). In terms of accuracy I am hoping it will perform well being not only a pellet pistol but since it also has a rifled steel barrel this may help with accuracy. We will find out shortly when I make my Field Test Shooting video of this CO2 Pellet Pistol.

Build Quality: The Cybergun Thompson 1911 CO2 NBB Pellet Pistol has a mix of metal and plastic parts with the slide and magazine being the main metal parts and the frame along with most of the controls like the trigger, slide catch release, hammer and safety all being made out of plastic. Of course many of the internal parts like the barrel will be metal or even steel. Overall the Cybergun Thompson 1911 CO2 NBB Pellet Pistol feels solid and has a good weight up and over 2 pounds. Fit and finishes are also good but I would have liked to have seen the trigger, hammer, slide catch and safety being made out metal, as it just would have felt better to the touch. Yes I can feel the difference!

Realism: The Cybergun Thompson 1911 CO2 NBB Pellet Pistol looks pretty much bang on to a Colt 1911, really the big tell would be the trigger as it is much larger than a standard 1911 to accommodate the double action trigger pull length but other than that, this CO2 Pellet Replica Pistol does a good job of replicating the real steel version. It is even similar in weight and feel. The recessed barrel, full size drop out magazine, and I think the detail of the stainless finish on the slide all add to the realism.

Pros:

  • Double action trigger is not that bad, fairly light and smooth.

  • Fit and finish looks good, just wish the trigger, hammer and safety where also metal.

  • This pistol has a good weight at a little over 2 pounds!

  • Decently looking replica of the real steel colt 45 1911.

  • Has a rifled metal barrel which may help with accuracy..

  • White dot sights front and back helps with quick targets acquisition.

  • I like the stainless steel slide, it gives the gun a quality look.

  • Recessed barrel for added realism.

  • Full size metal magazine holds the CO2 and Pellets and adds additional weight.

  • Thompson Licensing looks good on this gun, not too much.

Cons:

  • Trigger, hammer and safety should have been made out of metal.

  • Hammer is non functioning.

  • No blowback and no sight adjustments.

Comments:

The best feature of the Cybergun Thompson 1911 CO2 NBB Pellet Pistol is the stainless steel slide finish which really gives it a quality look and makes it even more believable. What takes away from the believability are the plastic parts and the lack of blowback operation or even a working slide. That said the Cybergun Thompson 1911 CO2 NBB Pellet Pistol offers a rifled steel barrel combined with shooting pellets which should make this a more accurate option over perhaps a Blowback CO2 BB 1911. I will have to test this out shortly to know for sure but if accuracy is more important than realism, than the Cybergun Thompson 1911 CO2 NBB Pellet Pistol may be your better option.

Categories: 4.5mm / .177 cal, CO2, Pellet, Pistol, Review, Semi Auto, Vimeo Video Tags: Thompson Custom 1911, M1911

ASG CZ Shadow 2 Blowback CO2 BB Pistol Table Top Review

No Comments

Type: Blowback BB Pistol.
Manufacturer: Made and Distributed by ASG.
Model: CZ Shadow 2.
Materials: Mostly all Metal.
Weight: 2.7 pounds (1230 grams).
Barrel: 4.5 inches (114mm) metal non-rifled.
Total Length: 85 inch (215mm).
Propulsion: 1 x CO2.
Action: Semi auto blowback, single & double action trigger.
Ammunition Type: 4.5mm steel BB's.
Ammunition Capacity: 17 round drop out full size metal magazine.
FPS: Claimed 285.

Trigger Pull: The trigger pull on the ASG CZ Shadow 2 Blowback CO2 BB Pistol is both single and double action, by either pulling the slide or hammer back you engage the single action trigger which is nice and short and light with a medium take-up. You will need to pull the slide back to load a BB into the breach area for your first shot or you will simply be shooting CO2 on that first shot. If you drop the hammer down once a BB is in the breach, you can shoot in double action which is much heavier but it is fairly smooth without any noticeable sticking points.

Accuracy: I have not shot the ASG CZ Shadow 2 Blowback CO2 BB Pistol or made my Field Test Shooting Video so far, that will happen hopefully next week. So right now I can not comment on the true velocity or accuracy of this BB Pistol. It is very well made so I expect it to perform like most Full Blowback CO2 BB pistols which means it should shoot around a 1-2 inch 10 shot grouping at 30 feet away. And I expect it to achieve a velocity close to the manufacturers claimed fps, so just under 300 fps as claimed by ASG. We will find out for sure next in a weeks time!

Build Quality: The ASG CZ Shadow 2 Blowback CO2 BB Pistol is distributed by ASG but I am not 100% sure who exactly makes it for them. I feel it is either going to be KJWorks or KWA. In either case both companies make very high quality Airsoft and Airguns and that is present with the ASG Shadow 2 Blowback CO2 BB Pistol. Fit and finish are excellent and the entire gun is virtually all metal with an anodized slide and zinc grips. It weighs in at a very hefty 2.7 pounds and has a very solid feel to it.

Realism: The ASG CZ Shadow 2 Blowback CO2 BB Pistol is a 1 to 1 copy of the real steel CZ Shadow 2 IPSC Pistol and side by side it would be very hard to tell one form the other. It features full blowback operation and can by fully field stripped. All the mechanical parts work like the real steel version adding to the realism of shooting this CO2 Competition built Blowback BB Pistol. Again it is full metal which not only helps it look the part, but also feel the part. It is a very realistic replica and to make it even more believable, ASG has provide the CZ licensing to add all the correct markings to this product.

Pros:

  • Single and double action trigger with a nice light short single action trigger.

  • Fit and finish is excellent, very little slide wiggle, all metal build.

  • This pistol is heavy at 2.7 pounds!

  • Extremely close replica of the real steel CZ Shadow 2 in both looks and function.

  • Rear sight is fully adjustable and sits very flush with the slide.

  • Fiber optic front sight helps with quick targets acquisition.

  • CNC machined Aluminum slide and full metal build including the machined zinc pistol grip sides.

  • Recessed barrel for added realism.

  • Full size 17 round metal magazine holds the CO2 and BB’s and adds additional weight.

  • Side swappable Ambidextrous magazine release.

  • Extended trigger guard makes shooting with gloves easier.

  • Claimed to be highly accurate, we will find out during my Field Test.

  • Most Mechanical parts work just like a steel version and can be easily field stripped to access hop-up.

  • Heavy slide spring with fast blowback action, great for action shooting.

  • Licensing all over this gun true to the real steel version.

Cons:

  • Velocity of claimed 285 seems low.

  • Price will be a bit higher than some similar guns like this but the quality of the ASG CZ Shadow 2 is very high.

  • May be a bit heavy for some people.

Comments:

The ASG CZ Shadow 2 Blowback CO2 BB Pistol is a quality product all around not only being just full metal but also icormdrating Anodized Aluminum in the slide but also making the grips out of CNC Zinc. Fit and finish is excellent and the overall IPSC look is very appealing. It is a bit heavy coming in at 2.7 pounds but this will keep it very stable when performing competition styled shooting. I am really looking forward to seeing how this one performs as I have high expectations so I hope later on next week when I make my Field Test Shooting video it delivers as promised.

Categories: 4.5mm / .177 cal, BB, Blowback, CO2, Comparison, Pistol, Review, Semi Auto, Vimeo Video Tags: ASG, Shadow 2, CZ Shadow 2

Crosman Remington 1875 CO2 Dual Ammo Revolver Field Test Review

No Comments

I have reviewed many of the Shell Loading Revolvers in the past and I always enjoy shooting them anytime one shows up on my desk for review. So here I go again but this time with a product from Crosman but with the Remington License on it. As always, I test out the power using my Chronograph by shooting several rounds through it and averaging them out. I also setup a paper target 30 feet down range and generally put an entire cylinder or mag into it or 10 rounds depending on the capacity of the magazine or cylinder. In this Field test Shooting Video I did all of that but times two as the Crosman Remington 1875 CO2 Dual Ammo Revolver shoots both 4.5mm Steel BB’s and .177 Caliber lead pellets. If you are more interested in details and specifications along with more close up video of this item then watch my Crosman Remington 1875 CO2 Dual Ammo Revolver Table Top Review.

Starting with the velocity, or power for the Crosman Remington 1875 CO2 Dual Ammo Revolver, I measured using my Chronograph using a brand new 12 gram CO2 and I shot three rounds of BB’s and four rounds of pellets and averaged them out. Here are my BB Chronograph results in FPS: 423, 407, 398 (409 average). Here are my pellet Chronograph results in FPS: 300, 274, 270, 271 (279 average). I was using standard lead pellets which should be right around 7 grain while my 4.5mm Steel BB’s were around 5 grain. Temperature was average room temperature I would say.

For my Accuracy test I shot a full 6 round magazine of each ammo type or at least I tried to, but for some reason I was missing a round in my pellet test so I only shot five rounds for that one. For BB’s all shots were fairly well centered on the target but they did spread out to about 2.5 inches. Pellets dropped a bit perhaps as they were moving a lot slower? My pellet result was about the same at around 2.5 inches of spread between all 5 shots. The spread with the pellets was wider compared to the spread of the BB’s which was more vertical.

I have gotten more accurate results with other shell loading revolvers build in a similar fashion as the Crosman Remington 1875 CO2 Dual Ammo Revolver so I was expecting a little bit better results, but it could have been me that was the problem on this day? Still a close to two inch shot group at 30 feet away will generally nock pop cams over or other similar sized targets and this CO2 Revolver is really only meant for plinking fun and not so much match grade shooting. The Crosman Remington 1875 CO2 Dual Ammo Revolver is a real looker at the end of the day and if your want a single action only classic Western Revolver than look no further.

Categories: 4.5mm / .177 cal, BB, CO2, Field Test, Pellet, Pistol, Review, Revolver, Vimeo Video Tags: Crosman, Remington 1875

Barra Cowboy Series 1858 CO2 BB Revolver Table Top Review

No Comments

TypeBB Pistol.
Manufacturer: Distributed by Barra.
Model: 1858 Cowboy Series.
Materials: Mostly plastic, some internal metal parts.
Weight: 1 pound (455 grams).
Total Length: 12 inches (30.5cm).
Barrel: 5.35 inches (13.5cm) metal non-rifled.
Propulsion: CO2.
Action: Revolver SAO.
Ammunition Type: 4.5mm Steel BB’s.
Ammunition Capacity: 18 round internal magazine.
FPS: Claimed 400.

Trigger Pull: The trigger pull on the Barra Cowboy Series 1858 CO2 BB Revolver is a single action only trigger, so you will need to cock the hammer back before each shot which does take away almost all of the trigger pull length and weight, making it short and light and easy to shoot. Perfect for slowed down accurate shot placement, but less effective as an action shooter.

Accuracy: I have not tested out the Barra Cowboy Series 1858 CO2 BB Revolver but it is a lot like the Crosman Fortify SA CO2 BB Revolver so I am thinking it will perform at lot like that CO2 BB Revolver, if you want to get an idea on how the Barra 1858 might perform, you can watch my Crosman Fortify Filed Test Shooting Video to get a heads up before I make my official Filed Test Shooting Video for the Barra Cowboy Series 1858 CO2 BB Revolver.

Build Quality: When it comes to the build for the Barra Cowboy Series 1858 CO2 BB Revolver, there is not a lot to really get super excited about. It is basically a mostly all plastic gun with some metal parts internally like the barrel, trigger, hammer and CO2 area. The Barra 1858 has that lower cost Airgun, two halves, screwed together build which generally looks better on the side without the screws showing. As it is mostly plastic it is very light in the hand at only just about a pound or so. Overall there are not a lot of moving parts so it should be reliable enough just because there is not much to break or go wrong. All the mechanical components do what they need to do and feel solid enough.

Realism: The Barra Cowboy Series 1858 CO2 BB Revolver at a glance looks a lot like a Remington 1858 Single Action Revolver, it has the same shape and size but the weight is way less being mostly plastic. The lack of actual bullet holes in the cylinder looking at it from the front of the revolver also takes away from the realism. I guess I am really used to the new generation revolvers with working cylinders and real loadable shells but these guns are more expensive and hold less ammo as they are genuine to the 6 shooter capacity. The barrel is however recessed which is nice.

Pros:

  • Inexpensive revolver as compared to other shell loading styled revolvers out there.

  • A decent looking replica of a Remington 1858 Revolver.

  • Single action only trigger is short and light and well suited to careful shot placement shooting.

  • 400 claimed fps is about perfect for plinking at ranges up 30-40 feet.

  • 18 round magazine has a nice high capacity and easy to load when empty.

  • Should get lots of shots per CO2 as there will be very little CO2 leakage with a non shell loading design.

  • Safety is well well hidden just in front of the trigger so easy to get to.

  • Has a recessed barrel for added realism.

  • CO2 Allen key is built into grip so always have it on hand and will not lose it.

  • White markings as an warnings are not super obvious, could be a little lighter.

  • Comes with two starter CO2’s and some 4.5mm Steel BB’s.

Cons:

  • Almost all plastic builds makes it a bit light in the hand.

  • No fake shell holes in the front of the cylinder, could have added this for a more genuine look.

  • Sights are non adjustable but fairly normal for an inexpensive plinker.

Comments:
The Barra Cowboy Series 1858 CO2 BB Revolver is a completely new concept in design over what we have become use to in todays Single Action Legend Revolvers with their shell loading design, the Crosman Fortify as I have mentioned is the only other new classic cowboy Revolver on the market like it so perhaps there will be more in the future. My shooting experience with the Crosman Fortify CO2 BB Revolver was about what I expected, it shot pretty close to the claimed fps and got around a 2 inch 10 round grouping shooting at a paper target 30 feet down range. So we will see if the Barra Cowboy Series 1858 CO2 BB Revolver performs about the same which was respectable. For a low cost BB Revolver you kind of get what you pay for here, which is not a bad deal at the end of the day considering the lower cost to get you up and shooting.

Categories: 4.5mm / .177 cal, BB, CO2, Comparison, Pistol, Review, Revolver, Vimeo Video Tags: Barra, Barra 1858

Crosman Remington 1875 CO2 Dual Ammo Revolver Table Top Review

No Comments

TypeBB Pistol Pellet Pistol.
Manufacturer: Distributed by Crosman.
Model: Remington 1875.
Materials: Mostly metal, some plastic parts.
Weight: 2.3 pound (1043 grams).
Total Length: 13 inches (33cm).
Barrel: 6.5 inches (16.5cm) metal non-rifled.
Propulsion: CO2.
Action: Revolver single action only.
Ammunition Type: 4.5mm BB’s / .177 cal. pellets.
Ammunition Capacity: 6 round cylinder.
FPS: Claimed 410-450.

Trigger Pull: The trigger pull on the Crosman Remington 1875 CO2 Dual Ammo Revolver is very good. it its single action only as is expected from a revolver of this era. There is almost zero take up and creep and the weight is light but not super light so as to not accidentally release the trigger before you intend to. I would not want to change this trigger at all.

Accuracy: I have not made my Field Test Shooting Video yet for the Crosman Remington 1875 CO2 Dual Ammo Revolver but will be making it shortly. Until then I can only go on past experiences with similar shell loading single action only revolvers like the Single Action Army Revolvers form Umarex and they generally perform well in both steel BB and pellet versions. Generally they do not have rifled barrels but that does not seem to affect the pellets all that much at least at the ranges I am shooting at which will be around 30 feet away. Stay posted for my upcoming Field Test Shooting Video for this Revolver.

Build Quality: Build quality for the Crosman Remington 1875 CO2 Dual Ammo Revolver is excellent. It is hard to find any plastic on this product as it seems to be entirely made out of metal other than the grips. it weighs in at 2.3 pounds so it feel very solid in the hadn't and the nickel chrome finish looks really good with the bone colored grips. Just expect to do a lot of wiping down if you do not like finger prints on your guns. All the mechanical parts feel tight and work well.

Realism: The new generation shell loading revolvers all look and festoon super realistic with their removable shells and very realistic working parts. It actually feels like you are working with the real deal as you need to load up shells manually and insert them in the gun one by one just like a 6 shooter back in the day. One little detail mistake all of these shell loading six shooters seem to make, is that the shells are most closely similar in size to a .357 or .38 caliber where as real steel versions would be chambered more in a .44 or .45 caliber shell so the shells are not true to scale but this is a very minor point.

Pros:

  • Almost all metal build with a solid 2.3 pound weight.

  • A decent looking replica of a Remington 1875 Revolver.

  • Single action only trigger is short and light and well suited to careful shot placement shooting.

  • 450 claimed fps is about perfect for plinking at ranges up 30-40 feet.

  • Have the choice of shooting  either 4.5mm Steel BB’s or .177 caliber pellets.

  • Comes with 6 shells for 4.5mm BB’s and 6 shells for .177 caliber pellets.

  • Safety is well well hidden just in front of the trigger so easy to get to.

  • Has a recessed barrel for added realism.

  • CO2 Allen key is built into grip so always have it on hadn’t and will not lose it.

  • Chrome finishes with bone style grips looks really good.

  • White markings don’t stand out too much on the chrome finish.

Cons:

  • Not a big fan of the clamshell packaging  as I feel it cheapens the product and initial unboxing joy.

  • Barrel is not rifled for the pellets.

  • Sight are non adjustable but fairly normal for an inexpensive plinker.

Comments:
The Crosman Remington 1875 CO2 Dual Ammo Revolver is a well rounded shell loading revolver and for me checks a lot of the boxes and would be a good choice if you are looking for a single action only revolver of this era. It gives you the option of shooting either 4.5mm Steel BB’s or .177 caliber Pellets and you even get 12 shells (6 of each). The nickel finish with the bone grips looks really good and I like the slightly longer barrel which does help add to the beefy 2.3 pound feel in the hand of this CO2 Revolver. I wish it came in nicer looking packaging but this won’t matter once you take it out and start shooting.

Categories: 4.5mm / .177 cal, BB, CO2, Pellet, Pistol, Review, Revolver, Vimeo Video Tags: Crosman, Remin, Remington 1875

March Rifle Revolver Unboxing Update Video

No Comments

Another Unboxing Update Video taking a look at two Rifles and two Revolvers. A shell loading CO2 dual ammo 1875 single action Remington branded Revolver from Crosman, an 1858 single action CO2 BB Revolver from Barra, another Barra product kind of like a Red Ryder BB Riffle but in dual ammo version with a much different loading system called the Barra 1866, and lastly a Cybergun CO2 Airsoft MP40 with a very different magazine setup than I have seen before.

Crosman - Remington CO2 BB/Pellet 1875 Revolver

  • Manufacturer: Crosman.

  • Powersource: CO2

  • Type: BB Pistol Pellet Pistol

  • Caliber: .177" (4.5mm)

  • Barrel Type: Smooth Bore

  • Trigger Action: Single

  • Magazine Capacity: 6

  • Material: Mostly Metal

  • Safety: Slide

  • Steel BB Velocity: Up to 450 fps

Barra CO2 BB 1858 Single Action Revolver

  • Manufacturer: Barra Airguns

  • Powersource: CO2

  • Type: BB Pistol

  • Caliber: 4.5mm

  • Barrel Type: Smooth Bore

  • Action: Single

  • Capacity: 18 Rounds

  • Safety: Manual

  • Material: Mostly Plastic

  • Max velocity: 400 FPS

Barra Lever Action BB/Pellet 1866 Junior Rifle

Manufacturer: Crosman.

  • Powersource: Spring

  • Type: BB Rifle Pellet Rifle

  • Caliber: .177" (4.5mm)

  • Barrel Type: Smooth Bore

  • Trigger Action: Lever

  • Magazine Capacity: 50BB’s / 1 Pellet

  • Material: Metal/Synthetic

  • Safety: Automatic

  • Steel BB Velocity: Up to 350 fps

Cybergun MP40 CO2 Blowback Airsoft Rifle

  • Powersource: Dual CO2

  • Type: Airsoft Rifle

  • Caliber: 6mm

  • Barrel Type: Smooth Bore

  • Trigger Action: Blowback - Single Action

  • Magazine Capacity: 530 Airsoft BB’s

  • Material: Metal/Synthetic

  • Safety: Switch

  • Steel BB Velocity: Up to 400 fps

Categories: .22 cal, 4.5mm / .177 cal, 6mm, Airsoft, BB, CO2, Pellet, Pistol, Review, Revolver, Rifle, Semi Auto, Vimeo Video, Spring Piston Tags: Barra, Cybergun, Crosman, Remington, Remington 1875, Barra 1858, Barra 1866, Cybergun MP40

March Pistol Unboxing Update Video

No Comments

I’ve got some new Airguns to show everyone today and all of them are Pistols of some sort or another. I show you three 4.5mm BB Pistols from ASG, a Cybergun 1911 NBB BB Pistol, an Airsoft Full Blowback Pistol from EMG and lastly from Umarex, an HK Full Blowback Airsoft Pistol. This is not a full review by any means, the video is mainly to let you know what is coming up in terms of Table Top and Field Test Videos and that we do have these products at least listed in our Replica Airgun Store.

ASG CZ SP-01 Shadow CO2 Blowback BB Pistol

  • Type: BB Pistol

  • Manufacturer: ASG

  • Model: CZ 75 SP-01 Shadow

  • Materials: Full Metal

  • Weight: 1315 g (2.09 lb)

  • Barrel: Smoothbore

  • Power Source: CO2

  • Action: Semi-Automatic

  • Ammo Type: 4.5mm Steel BBs

  • Ammo Capacity: 17 Rounds

  • FPS: 312

ASG Ingram Cobray M11 CO2 NBB BB Pistol

  • Type: BB Pistol

  • Manufacturer: ASG

  • Model: Cobray Ingram M11

  • Materials: Polymer Body, Metal Stock

  • Weight: 531 g (1.2 lb)

  • Length: 255 mm (10 in)

  • Power Source: CO2

  • Action: Semi-Automatic

  • Ammo Type: 4.5mm Steel BBs

  • Ammo Capacity: 27 Rounds

  • FPS: 400

ASG CZ Shadow CO2 Blowback BB Pistol

  • Manufacturer: ASG

  • Model: CX Shadow

  • Materials: All metal

  • Weight: 1230 g (2.7 lb)

  • Barrel Length: 95 mm (3.7 in)

  • Power Source: CO2

  • Action: Semi-Automatic

  • Ammo Type: 4.5mm Steel BBs

  • Ammo Capacity: 18 Rounds

  • FPS: 350-400

Cybergun Thompson 1911 CO2 NBB Pellet Pistol

  • Type: Pellet Pistol

  • Manufacturer: Cybergun, Licensed by Auto Ordnance

  • Power: CO2 Powered

  • Caliber: 4.5mm (.177 cal) Pellets or BBs

  • Fire Modes: Semi-Auto

  • Magazine Capacity: 6rds x 2

  • Muzzle Velocity: 332 FPS (2.3 Joule)

  • Length: 8.66" (220mm)

  • Weight: 2.18lb (990gr)

EMG Salient Arms International SA1 BLU CO2 Blowback Airsoft Pistol

  • Model: SA1 BLU

  • Materials: Metal and Plastic

  • Weight: 772 g (1.7 lb)

  • Length: 190 mm (7.5 in)

  • Power Source: CO2

  • Action: Semi-Automatic

  • Ammo Type: 4.5mm Steel BBs

  • Ammo Capacity: 25 Rounds

  • FPS: 375+

Umarex HK USP 45 Match GBB Airsoft Pistol

  • Model: HK USP Match

  • Materials: Metal and Plastic

  • Weight: 998 g (2.2 lb)

  • Length: 245 mm (9.6 in)

  • Power Source: Gas

  • Action: Semi-Automatic

  • Ammo Type: 6mm Airsoft BBs

  • Ammo Capacity: 28 Rounds

  • FPS: 360+

Categories: 4.5mm / .177 cal, 6mm, Airsoft, BB, Blowback, CO2, GBB, Gas, Pellet, Pistol, Review, Semi Auto, Vimeo Video Tags: Umarex, EMG, Cybergun, ASG, HK45, H&K USP, M1911, Thompson Custom 1911, Salient Arms International, SA1, CZ SP-01 Shadow, Ingram M11, CZ Shadow

KWC K17 Black Barrel CO2 Blowback BB Pistol Table Top Review

1 Comment

Type: Blowback BB Pistol.
Manufacturer: Made and Distributed by KWC.
Model: K17 (Black Barrel Version).
Materials: Metal & Polymer.
Weight: 1.68 pounds (760 grams).
Barrel: 4.3 inches metal non-rifled.
Propulsion: 1 x Co2.
Action: Semi auto blowback, single action only trigger.
Ammunition Type: 4.5mm steel BB's.
Ammunition Capacity: 17 round drop out full size metal magazine.
FPS: Claimed 329.

Trigger Pull: The trigger pull on the KWC K17 Black Barrel CO2 Blowback BB Pistol is short with only a little bit of take up, the release is light and crips. The blowback action resets the internal Hammer / Striker with each shot for that true single action trigger and it’s also nice that the trigger does have a working trigger safety. You will need to rack the slide for the first shot but then the blowback action takes over for the rest of the shots.

Accuracy: I have already made a Field Test Shooting Video for the Gold Barrel version of this same KWC K17 pistol so you can check out that video here to see how the Black Barrel Version will essentially shoot. If you want to know right here and now the KWC K17 shot right around 325 fps and got a 4 inch grouping at 30 feet away shooting 10 rounds into a paper target. Maybe the Black Barrel Version will shoot a bit differently for me? We will find out soon enough…

Build Quality: The KWC K17 Black Barrel CO2 Blowback BB Pistol feels really good, I’m going to say it’s probably one of the nicest KWC CO2 blowback pistols I have had in my hands to date. The finish is really nice, the polymer frame is flawless and fit is really good with nice tight tolerances throughout. it may even look better to me than the Umarex Glock version it is similar to?

Realism: The KWC K17 Black Barrel CO2 Blowback BB Pistol being a full blowback Airguns is supper realistic in terms of looking like and functioning like a real steel gun. All the parts function as you would expect them to including the ability to filed strip the KWC K17 which gives you easy access to the hop-up. In terms of the KWC K17 Black Barrel CO2 Blowback BB Pistol being a replica it does look similar to Glock with some differences like the trigger guard, slide cut-outs, extended beaver tail and straighter pistol grip. As I shoe in my Review video the parts even mix and match with the Umarex Glock 17 Gen 4 CO2 Blowback BB Pistol we also sell.
Available From: The Replica Airguns Store.

Pros:

  • Good weight with very solid feel to it.

  • Full blowback action will produce good recoil effect.

  • Full size drop out metal magazine.

  • Short and light single action only trigger.

  • No ugly markings or warnings.

  • I prefer the more standard look of this Black Barrel Version.

  • Field strips like the real steel version.

  • White dot sights front and back.

  • Adjustable hop-up to adjust for some limited elevation as needed.

  • Working trigger safety along with serial number safety.

Cons:

  • Full blowback action will produce lower fps and use up more CO2.

  • But plate could be more like the Umarex Glock version.

Comments:

I really like the KWC K17 Black Barrel CO2 Blowback BB Pistol as I did the Good Barrel Version, it may even be one of my favorite CO2 Blowback BB Pistols from KWC to date. I am not a huge fan of the Gold barrel version but that’s a personal preference thing. All in all if you’re looking for that Modern Pistol design than the KWC K17 CO2 Blowback BB Pistol is going to fit the bill. If you are a Glock fan also make sure to checkout our Umarex Glock line of CO2 BB, Airsoft and even Paintball Replica Pistol in our online Replace Airgun stores…

Categories: 4.5mm / .177 cal, BB, Blowback, CO2, Comparison, Pistol, Review, Semi Auto, Vimeo Video Tags: KWC, K17, KWC K17, Glock