In this Field Test Shooting Video conducted in the Replica Airguns Sea Can indoor Shooting Range, I test the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol’s power in velocity using my Chronograph along with the accuracy shooting at a Paper Target setup 30 feet away. If you are also interested in details, specifications and more close up video of the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol, then make sure to watch my Table Top Video I already made for it here…
When I placed 6 pellets from the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol through my Chronograph, I removed the fastest and slowest recorded shots, and got an average of 290 fps, there was a fairly big range in fps as some dieseling may have been occurring, since this Pellet Pistol had not been shot before and there may have been some oils in the barrel. Here are my recored velocities for all 6 shots: 213, 286, 308, 270, 304, 298. I was using lead flathead pellets that weighed 8.2 grain each. So you will for sure get much higher velocities using 5 grain alloy pellets, probably very close to the 400 claimed fps.
Moving on to my accuracy test, the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol did pretty good. I was not sure how it would shoot for me as the trigger is pretty firm, which can cause the shooter to pull a shot or two. I was able to keep my shots pretty consistent with perhaps one shot getting a bit away from me. That said, out of the 10 shots I placed on the paper target setup 30 feet down range, I managed to get 9 of them all within about 2 inches of each other with the larger spread being elevation, windage was within about 3/4 of an inch, so consistent velocity may have played a roll here. I did use a semi rested shooting position with my hands resting on a sand bag up front, and sitting on a stool in the back to help stabile me as much as possible. I was happy that out of the box the aim point was pretty well centered just a bit to the right if anything.
All in all the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol performed as much as I could have expected for a $50 Canadian low cost pellet shooter. I really wish an add on sight of some sort was possible, as there does not seem to be anyway of adjusting the sights on the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol, so hopefully yours shoots well centered for you also. I do not recommend this Air Pistol for people with smaller hands as it is a bulky Airgun with very wide and large grips. The trigger also does take a bit of finger strength so not a gun for younger shooters perhaps. For the price it is a very unique Pellet Pistol with a very modern and futuristic look to it which may or may not appeal to everyone.
Type: Pellet Pistol. Manufacturer:Umarex Model:Markpoint. Materials: Mostly plastic with some metal. Weight: 1.79 pounds (812 grams). Barrel: 9.75 inch (24.8 cm) Rifled steel barrel. Total Length: 17 inches (43.2 cm). Power Source: Spring piston. Action: Break Barrel - Single Action Only. Ammo Type: .177 caliber pellets. Ammo Capacity: Single shot. FPS: 395 with alloy pellets, 300 with lead pellets.
Trigger Pull: The trigger pull on Umarex Markpoint Break Barrel .177 Cal Pellet Pistol is single action only and you will have to break the barrel and fully cock it to activate the trigger in order to shoot it. You will have to also insert a pellet for each shot when the barrel is in the open position. The trigger itself is a bit on the heavy side with a short takeup. It is not super heavy but I would not consider it light or even medium weight. There is a grip safety that needs to be pressed in at the back of the grip, or the trigger will not function. This is a nice additional safety feature.
Accuracy: So far I have not had the opportunity to test the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol, but the plan is to get to my Field Test Shooting Video shortly and see how it performs in terms of power and accuracy. The Umarex Markpoint Break Barrel .177 Cal Pellet Pistol does have a nice long rifled steel barrel so it has the potential to be very accurate. My main concern is with the sights as they are none adjustable and if it is not well centered out of the box then the only way to adjust it will be by adjusting your aim point to correct any off center shots. There is also no way that I can see to mount a red to or scope of some sort. It looks like there is a rail system on the barrel but it is just cosmetic and there is no way to mount a picatinny accessory to it. I am not sure why Umarex simply did not make the rail a true picatinny rail?
Build Quality: For around a $50 Canadian pellet pistol that has the potential to be a pretty decent entry level target pistol, the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol is pretty well made and feels very solid and mechanically tight. It is mostly plastic but does not feel cheap at all. It is a rather large pistol, especially the grips being fairly wide, so for people with small hands, it may be a bit hard to hold.
Realism: The Umarex Markpoint Break Barrel .177 Cal Pellet Pistol is not a copy or replica of any real steel pistol in production that I know of. To be honest Umarex was not trying that hard to make it look like a real steel pistol as it has it’s very own look to it that I would say is modern and kind of futuristic looking. It for sure has its own style to it, and you are either going to like it to not? I do like that Umarex added the ejection port and vented barrel which does add to the cool factor and makes it feel more like a real gun.
Pros:
Feels well built and solid.
Overall look is good, kind of futuristic if you like that sort of thing.
I like the red highlights, not typical on a real steel gun but looks good on this design.
Expect it to have good accuracy, hope the sights are on point?
Easy to cock spring piston system.
Sights are easy to line up .
Grip safety is a nice safety feature.
Fake ejection port is a nice touch, not something you would normally see on a target pistol like this.
Nice low price tag for some fun target shooting.
Cons:
Trigger is a bit heavy but in terms of length and break is OK.
Sights are not adjustable and no way to add a red dot or other sighting system.
Grip may be a bit wide for smaller handed shooters.
Comments:
For me I think the deciding factor on how I feel about the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol is going to come down to how it performs as I have my reservations on how accurate it is going to be and if it shoots true out of the box. I really hope the sights are dialed in out of the box since there is no way to adjust them or add a red dot or other sighting system. The heavy trigger will take a bit of getting use to also but once adjusted to it I should be able to get some decent groupings. For the price, if it turns out to be a decent shooter and you like the look of it, then by all means it would make a great target plinker that you should be able to get proficient at shooting with. I will leave my final thoughts for the Field Test Shooting video on this one…
In this Mystery Boxing Video I get to take a look at 4 new Airgun Products and give you my first impressions along with a few specifications about each of them but not in a lot of details as I have not had an opportunity to research any of them as this my first time seeing them.
First out of the Mystery box is a new Umarex T4E .43 Caliber CO2 Blowback Paintball Pistol with Walther licensing called the Umarex T4E PDP. I have reviewed similar styled T4E .43 caliber CO2 Blowback Pistols in the past and this one should perform and function similarly.
The next Airgun I pulled out out of the box was the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol, a really nice 1911 styled Airsoft Pistol with a stainless finish and gold barrel with a CO2 Magazine. This one looks and feels really nice.
Staying with the pistols that came in this Mystery Box, I got my first look at the Umarex Markpoint .177 Caliber Break Barrel Pellet Pistol that has a bit of a utilitarian look and feel to it. This one is the longer barrel version and has a claimed fps of 395 using alloy pellets so we will see what it can get with more traditional lead pellets when I make my Field Test Video for it down the road a bit.
The last item out of the Mystery Box was another Umarex product, a fun CO2 BB Rifle with H&K licensing called the HK416. This semi auto and 6 round Burst internal Blowback CO2 BB Rifle is a lot like the Steel Storm and Steel Strike from Umarex but a little bit larger I would say and with H&K Licensing so more of a true Replica Airgun.
I will be making full Table Top and Field Test Videos for all of these items shortly so keep an eye out for those videos but for now you can at least get an idea what these Airgun Products will offer.
I don’t believe I have ever interviewed EKOL at SHOT Show in the past. I have dropped by their booth and taken a look at their product line and chatted but this year EKOL had some new and interesting products that I feel fit in nicely with Replica Airguns products and Replica Airgun enthusiasts.
In this EKOL SHOT Show 2024 Interview Omer from EKOL goes over three Airguns that are new for this year. The EKOL ES P92 which is a CO2 BB Blowback Beretta 92 Replica but rather than rebrand a KWC made version, EKOL makes their own in their own factory and it is very unique compared to other CO2 BB Blowback Beretta 92’s on the market.
Another product form EKOL based on the ES P92 Pistol is the EKOL ES P95B which I would call an SMG or submachine gun with a folding stock, but it only shoots in semi auto and is based off of EKOL’s ES 92 mechanically.
Lastly, Omer showed me one of their Replica Pellet Rifles, the EKOL AK which is a break barrel AK Replica Spring Piston Pellet Rifle that really looks a lot like an AK 47. EKOL also makes a very believable AR/M16 Break Barrel Pellet Rifle as well!
We have not carried much if any of the EKOL product line over the last few years so hopefully we can get some of these into our Online Replica Airguns Stores as they should even be legal for import into Canada.
Kicking off my SHOT Show 2024 Interviews, I present my Umarex Interview with Mark Davis, you may remember Mark from past Umarex SHOT Show Interviews? This is a fairly long interview as Mark had a lot of product to show me including…
The new Marlin Lever Action BB Rifle, the Walther PDP CO2 BB Pistol, the BBX11 1911 Blowback CO2 BB Pistol, the MarkPoint Break Barrel .177 Caliber Pellet Pistol, the Trinity Hi-Cap 2011 Blowback Airsoft Pistol, the Gambler High Stakes Single Action Army CO2 Airsoft Revolver, the Glock 380 GBB Airsoft Pistol, the CQC Elite Force AEG Airsoft Rifle with i-Trace, and the Beretta PMX GBB Airsoft Rifle.
Yep, that’s a lot of products to go over in one Interview, and Mark did a great job! I am really looking forward to getting my hands on these new products from Umarex to review for everyone!
30 feet is not really a long enough distance to test out a Spring Piston Break Barrel Air Rifle but it’s been pretty rainy outside as the weather here in British Columbia has progresses into full on rainy fall weather. So we will have to make do with the 30 foot limitation I have here in the Replica Airguns Sea Can Indoor Shooting Range. At least it is warm and the lighting is perfect :) In this Filed Test Shooting Video for the Beeman Black Panther Dual Caliber Break Barrel Pellet Rifle I test out the velocity in fps along with the accuracy at 30 feet away. For both of these tests I use 15.43 grain .22 caliber Gamo lead pellets. If you are more invested in details and specifications along with some closer up video then watch my Table Top Video for the Beeman Black Panther.
Beeman claims just under 500 fps for the Beeman Black Panther Dual Caliber Break Barrel Pellet Rifle but it is unclear if this is with .177 caliber or .22 caliber pellets and what kind of pellet are being used? Light weigth Alloy or standard Lead pellets. I decided to go with the .22 caliber barrel for all my testing but may try out the .177 caliber barrel in a future update Field Test Video. I placed 5 shots through my Chronograph using the 15.43 grain .22 caliber lead pellets and was able to get an average velocity of 422 fps. The slowest shot was 418 fps with the fastest shot hitting a max of 429 fps so all fairly close together. In terms of energy output, a pellet that weighs 15.43 grain travelling at 422 fps has a foot pound energy of 6.1.
I am not the best shot when it comes to sprig Piston Air Rifles, but I did my best here. I shot a total of 8 shots on the paper target and the main group was about 1 inch in diameter, this consisted of 6 pellets in that main group with 2 pellets that came out one shot a bit high and one shot a bit to the right. I was using the built in post and notch fiber optic sights rather than installing the 4x32 scope. After all the target was only 30 feet away. I am pretty sure one could easily get a .5 inch grouping at this range with perhaps a 1 inch grouping at distances closer to the 50-60 foot mark, which should make this a decent pest control option when using the .22 caliber ammo as I feel it would get the job done with a bit more authority.
The Beeman Black Panther Dual Caliber Break Barrel Pellet Rifle comes with two barres offering the ability to shoot using .177 caliber pellets or .22 caliber pellets with a quick barrel change. .177 caliber pellets could be used for smaller pest control but I would mainly use the .177 barrel for basic target practice as .177 caliber pellets are definitely cheaper than .22 caliber pellets. When you do require that slight additional stopping power, then go with the .22 caliber barrel for sure!
I don’t get to test out Bolt Action Airsoft Sniper type Rifles all that often but I do enjoy them for sure. I would like to test out the S&T Matrix KAR98K Bolt Action Airsoft Rifle using longer ranges than I can here in the Replica Airguns Indoor Sea Can Shooting Range but hopefully this Filed Test Review gives you an idea of what this Spring powered Bolt Action Airsoft Rifle can do. Make sure to watch my Table Top Review for the S&T Matrix KAR98K Bolt Action Airsoft Rifle for details, specifications and closer up video. In this video I mainly test out the velocity and accuracy at 30 feet away to see what the actual fps is and how tight of a 10 shot grouping I can get on a paper target.
Starting with the velocity test, I generally put 5 rounds through my Chronograph and then average them out for a real world rating. In this test I used standard .20 gram Airsoft BB’s for both the velocity and accuracy components of the video. I was very impressed with the consistency of the velocity with the slowest shot hitting 362 fps and the fastest shot hitting 363 fps averaging 362.5 fps and only having a 1 fps maximum difference between all shots. Pretty good right? Consistent velocity is very important for any sniper type rifle as if there is a large spread in velocity this can reduce elevation accuracy down range.
In terms of accuracy I was again very impressed with my results. For my target test I setup a fresh paper target 30 feet away and proceeded to shoot 10 rounds into it. I did have to reset for each shot as I had to manually work the bolt after each shot, this can affect accuracy but it did not seem to all that much. I was using a seated position in the back with my hands rested on a sand bag up front which does hep settle things down. Even with having to reset between each shot, I still managed to get close to a 1 inch 10 shot grouping, one shot did shoot just a bit high but that was probably me pulling it a bit. Out of the box with no sight adjustments the S&T Matrix KAR98K Bolt Action Airsoft Rifle shot almost dead center in the bullseye, it is fairly easy to adjust the elevation using the rear sight but there is no easy way to adjust for windage using the built in iron sights.
I know this is a Field Test Shooting Video and so it’s not really all about build or quality. That said I do love the quality and attention to detail the S&T Matrix KAR98K Bolt Action Airsoft Rifle has and the fact that it performs really well too is a big bonus. One last point I did not even mention in the Field Test Video is that Was able to load a lot more than 11 rounds into the magazine. I stoped at 19 as the spring was getting on the tight side, but may have been able to load more? If you’re looking for a sniper rifle with a history and that will stand out in a game then take a look at the S&T Matrix KAR98K Bolt Action Airsoft Rifle as an option.
Type: Airsoft Rifle. Manufacturer: S&T Model: KAR98K Materials: Metal & Wood. Weight: 3300 grams (7.28 pounds). Total Length: 1120mm (44.1 inches). Barrel: 483mm (19 inches) Smooth bore. Power Source: Spring Piston. Action: Bolt Action - Single Action Only. Ammo Type: 6mm Airsoft BB. AmmoCapacity: 11 Round Magazine. FPS: 380-420.
Trivia: The Karabiner 98 kurz (German: "carbine 98 short", often abbreviated Kar98k or K98k and often incorrectly referred to as a K98 (which was a Polish Carbine) is a bolt-action rifle chambered for the 7.9257mm Mauser cartridge that was adopted on 21 June 1935 as the standard service rifle by the German Wehrmacht. It was one of the final developments in the long line of Mauser military rifles. Although supplemented by semi- and fully automatic rifles during World War II, it remained the primary German service rifle until the end of the war in 1945. Millions were captured by the Soviets at the conclusion of World War II and were widely distributed as military aid. The Karabiner 98k, therefore, continues to appear in conflicts across the world as they are taken out of storage during times of strife.
Trigger Pull: The trigger pull on S&T Matrix KAR98K Bolt Action Airsoft Rifle is a single action only trigger as the bolt action not only compresses the spring but also readies the trigger for release making the trigger pull short and light. There is a short amount of takeup with a crisp and light release.
Accuracy: I have not shot the S&T Matrix KAR98K Bolt Action Airsoft Rifle so far but plan to make a full dedicated Field Test Shooting Video shortly to find out what the actual real world velocity and accuracy will be. So stay posted for my upcoming shooting test in a few weeks time…
Build Quality: The build quality for the S&T Matrix KAR98K Bolt Action Airsoft Rifle is really good as it is made almost exclusively of either metal or wood. The stock is finished in a dark walnut stain and the metal has a rustic finish about it which is what you would find in a real steel aged version. You will also find a CNC Aluminum body along with a Reinforced metal barrel, bolt assembly and internals. The S&T KAR98K has a quality feel about it inside and out.
Realism: As mentioned earlier the finishes has a less refined look adding to the realism, that combined with the real wood stock really makes this Bolt Action Airsoft Rifle supper believable as a Replica Airgun. The only real giveaway is when you pull the bolt back and it is a solid unit with no visibility in to the magazine area. Other than that the S&T Matrix KAR98K Bolt Action Airsoft Rifle is a solid copy of the real steel version.
Pros:
Super believable replica of the real Kar98k.
Very solid build quality weighing over 7 pounds.
Realistic materials including the real wood stock.
CNC Aluminum body.
Reinforced metal barrel, bolt assembly and internals.
No need for a battery or to use CO2 or gas.
Adjustable rear sight on the fly for elevation.
Bolt action feels smooth.
Easy to adjust Hop-up.
Cons:
Does come with a red tip (should be able to remove).
Rear sight not adjustable for windage.
No sling included, would have been nice.
Bolt does not allow to see into magazine area.
Comments:
The S&T Matrix KAR98K Bolt Action Airsoft Rifle looks and feels the part for sure and has a lot of quality going on with it’s real wood stock and quality metal throughout. I love the finish of not only the wood stock but also the metal parts as they have a less refined and aged quality about them that would be similar as to how a real World War 2 rifle would look today. If you want an ultra realist bolt action World War 2 Carbine that you can shoot almost anywhere, then look no further. OK the sticker price on this one is a bit higher than some, but again so is the quality so if that's important to you be prepared to pay a bit more.
In this Replica Airguns Unboxing Video I take a look at 6 Airguns consisting of 2 Paintball Pistols, 3 Airsoft Rifles and one Pellet Rifle. This is not a full review in any way but is rather a preview of what i will be doing full Reviews for over the next several weeks.
Airguns are generally cheaper to buy and for sure cheaper to shoot. Airguns can cost as little as $50-100 to buy while real guns in similar models will cost many time more. Cost of ammo is so much less expensive than Real Gun ammo by a mile!
Difficulty to Obtain:
Airguns in most countries do not require any licensing or registration. Generally there are more available options in Airgun choices than Real Gun choices as restrictions often prohibit many Real Guns to be obtained.
Places to Shoot:
Unless you live in a super remote locations and your laws allow you to shoot Real Guns in those locations, then in most cases you can shoot an Airgun almost anywhere within reason. You can even shoot certain Airgun models in your basement. Airsoft is a great option for indoor shooting as the plastic ammo does not carry very much energy so with minimal effort you can make a backstop that will trap the ammo very well.
Trigger Time:
Because ammo is much less expensive and places you can shoot are easier to find, you can get a lot more Trigger Time under your belt which will also improve your shotgun with Real Guns and after all it’s just fun to shoot guns even if they are Airguns.
Safety:
I am not talking about safety in terms of protection. I am talking about safety as in if you do something stupid and your Gun goes off accidentally. If you accidentally fire your Airgun indoors, the bullet will not travel through floors or walls and potentially harm or kill someone on the other side. If you do manage to shoot yourself with an Airgun, the consequence are much less severe than shooting yourself with a Real Gun. That said, always treat an Airgun as if it was a Real Loaded Gun, as server injury and even death can occur even with an Airgun.
Ware Games and Training Situations:
There is no way you can use a standard Real Gun to shoot at people, unless extensively altered with special parts that make the Real Gun unusable to shoot live ammo. With Airguns you have the choice of using an Airsoft or Paintball gun that are both designed specifically for this purpose.
Pest Control:
If you have the need for pest control in an urban area where you do not want a stray bullet to travel too far or penetrate buildings if a shot where to go awry, then an Airgun designed for accuracy and power may be perfect for the job. Accuracy with target and hunting Airguns is on par if not better than many Real Guns and are have powerful enough to kill a pest humanely without having too much power for the job and having to worry as much about your background.
Prop Guns:
As mentioned already, Airguns can look a lot like Real Guns, so they are perfect to be used as a stand-in or Prop Gun when you need to simulate the look and function of a Real Gun. Again they are easier and cheaper to obtain and if something does go wrong, the consequences are much less severe.
Social Stigma:
Unfortunately Real Guns and perhaps any gun these days are looked upon with a social stigma as being the cause of the Crime rather than a tool used in a Crime. And so people blame Guns for these crimes rather than the people committing these crimes. If a person is motivated enough to do something bad, they are going to do it either way and will use whatever means is available to them to commit these Crimes. Including other means like: Knives, Blunt Objects, Poisons, Vehicles, Explosives… Sad but true! Airguns are not used in homicides or mass shootings as they are completely underpowered for a crime like this. They can however be used in crimes as a show of threat, as they do look a lot like real guns, generally people that use Airguns for real crimes, if challenged will give up immediately as they are completely outgunned. Don’t bring an Airgun to a Real Gun fight, you have better chance with a knife!
This review shows that low cost Airguns can perform just like higher priced Airguns. They may not be as realistic and all made out of metals for that added weight and feel but in terms of power and accuracy they can still get the job done as is with the Umarex NXG CO2 BB Pump Shotgun! In this Field Test Shooting Review I do just that, I test the power and accuracy first by shooting 5 rounds through my Chronograph to find out what the real world fps is, I then I shot 10 rounds down range at a fresh paper target to see what kind of grouping I can get and if the Umarex NXG CO2 BB Pump Shotgun is sighted in on the target out of the box.
Starting with the velocity test I first placed a brand new 12 gram CO2 into the Umarex NXG CO2 BB Pump Shotgun and loaded up the 10 rounds rotary magazine with Daisy Zinc Coated 4.5 mm Steel BB’s. The temperature was around 22 degrees Celsius which is 72 degrees Fahrenheit in the sea can indoor shooting range so not too warm or cold. The claimed fps from Umarex is 450, I was able to get an average of 403fps with the fastest shot hitting 425fps and the slowest shooting down to 388fps. So a bit under the Umarex claimed velocity but in the ball park.
Next I performed the accuracy test for the Umarex NXG CO2 BB Pump Shotgun and since the sights are non adjustable you kind of hope that where you aim is where the shots go but if they don’t then you will need to adjust your aim point just a bit. Out of the box the Umarex NXG CO2 BB Pump Shotgun did shoot a bit low but was fairly bang on side to side so when shooting at around 30 feet out you will need to aim just a tad over the intended target. Out of 10 shots, 8 rounds where all within a nice 1.5 inch grouping with a couple of flyers that I kind of want to keep out of this test because it was probably more me than the gun causing them to go off a bit. 1.5 inches is very good for a 4.5mm Steel BB Airgun!
All in all the Umarex NXG CO2 BB Pump Shotgun shot right around 400fps which is for sure a step up for something like a Red Ryder BB Rifle that at best can shoot 300fps. You also don’t have to work the pump as hard as you would the lever on a Red Ryder since the Umarex NXG CO2 BB Pump Shotgun is CO2 powered rather than spring powered. I also feel like the Umarex NXG Pump Shot was more accurate than the Red Ryder at least for me but that said some people can hit a nickel all day long with their Red Ryders! There are not a lot of Pump Action Looking Airguns out there in 4.5mm Steel BB versions and in more compact easier for younger or smaller shooters so if you fall into that category and want something in a shotgun format then the Umarex NXG CO2 BB Pump Shotgun may be perfect for you.
Trigger Pull: The trigger pull on the Umarex NXG CO2 BB Pump Shotgun is pretty decent, there is a short task up and fairly easy release as the pump action not only turns the rotary magazine but also cocks the internal hammer/striker system. So you will need to pump it before your first shot and after each shot.
Accuracy: I have not Field Test Reviewed the Umarex NXG CO2 BB Pump Shotgun yet but will be making a full Fields Test Review this week to find out what to expect in terms of accuracy and velocity. So we will find out if the fps is closer to the on the box specs of 450 fps or the mostly online specs of 490 fps. Perhaps somewhere in-between?
Build Quality: The Umarex NXG CO2 BB Pump Shotgun is almost all plastic which is not a bad thing in terms of quality and durability. The fact that it only weighs in at 2 pounds may make it feel kind of light and cheap but in a drop or fall situation it means it will most lily not sustain any damage because of the light weight. Most of todays airguns when made out of metals generally are made out of pot metal or zinc alloy which is a nice heavy metal that looks and feels great but is not super strong so when you drop a heavier gun made out of this material it can easily get damaged.
Realism: The Umarex NXG CO2 BB Pump Shotgun looks like a traditional pump action shotgun and even has a little bit of a recessed barrel to make it more believable but it is smaller in size since it is designed more for younger and smaller shooters. The light weight is not only a giveaway but makes ti feel more like a toy than a real gun. If you can ignore that then hopefully you can enjoy the Umarex NXG CO2 BB Pump Shotgun for what it is which is a low cost compact BB rifle made for customs interested in Airguns liek the Red Ryder but that perhaps want a bit more power.
Pros:
Low cost CO2 rifle great for all ages and sizes.
Has a fiber optic front sight.
Comes in a nice looking two tone Black/FDE color scheme.
Fairly easy to pump since the pumping action is not required to activate a spring or compress air.
Built in manual thumb safety.
Stock and high check rest position feel good and a good size length for smaller younger shooters.
Rotary drop out magazine holds 10 4.5mm steel BB’s for quick follow up shots.
Trigger feels pretty good, short and fairly light.
Full ambidextrous design.
Perhaps a step up for entry level shooter over a Red Ryder type BB rifle in terms of power.
Overall a decent looking air rifle.
Cons:
Mostly plastic, so a bit on the light weight side.
Sights are not adjustable in any way.
May be a bit cramped for larger shooters.
Comments: The Umarex NXG CO2 BB Pump Shotgun is not going to win any prizes for quality and realism but keep in mind it is really designed more for entry level younger shooters getting into the Airgun hobby. For them this will be not so intimidating as a larger, heavier more realistic version of a replica Shotgun. I think it will be realistic enough for most new Airgun Shooters and in terms of performance and features it is for sure a step up form something like a Red Ryder BB Rifle. I am looking forward to my upcoming Field Test Shooting Review out what the actual velocity is and what kind of groupings I can get shooting 30 feet down range on a paper target.
My Table Top Video of the Umarex NXG CO2 BB Pump Shotgun:
Type: Pellet Pistol. Distributer:Umarex. Model:Stainless Ruger Mark IV. Materials: Metal and polymer build. Weight: 1.56 pounds (708 grams). Barrel: 5.3 inches (135mm). Total Length: 11 inches (279mm). Propulsion: Spring Piston. Action: SAO Break Barrel. Ammunition Type: .177 caliber pellets. Ammunition Capacity: 1 round. FPS: 320.
Trigger Pull: The trigger pull on the Stainless Ruger Mark IV Break Barrel .177 Cal Pellet Pistolis not too bad, I feel it is a around 6-7 pounds or so without measuring. In comparison to a real steel 22LR semi auto SAO trigger pistol, the trigger is much heavier but most of these 22LR pistols of this nature have what I would consider to be near perfect triggers. Over time once you get use to the pressure and release point accuracy with this pistol it is for sure possible.
Accuracy: I have tested out the all black version of this pistol which will perform exactly the same or should I say is expected to perform the same since they are virtually the exact same Pellet Pistol but in different finishes. You can watch my Field Test Shooting Video for the all black version but in case you don’t make it there I will fill you in on the basic results… In terms of velocity I averaged 312 fps using 7 grain lead pellets and got around a 2 inch 7 rounds grouping but expect with a bit more trigger time to get closer to 1 inch.
Build Quality: The Stainless Ruger Mark IV Break Barrel .177 Cal Pellet Pistolis a low cost target plinker that also doubles as a licensed Replica for that coolness factor so you won’t get an all metal super top quality build here. That said metal and plastics are well used and for sure details in the fit and finish have been improved over the Buck Mark URX version where I found the barrel felt a bit sloppy and the trigger was plastic. The Umarex Ruger Mark IV Break Barrel .177 Cal Pellet Pistol has a much tighter barrel fit when closed and the trigger is now metal! Maybe Umarex watched my video back in the day and took some notes?
Realism: The Umarex Ruger Mark IV Break Barrel .177 Cal Pellet Pistol most resembles the Mark IV Hunter edition and is pretty much bang on in terms of being a replica other than the tell tail hinge just under the barrel required for a spring piston design, there really is no way to get around this so I’m not going to criticize this minor difference. The real steel version is almost 3 pounds and so the pellet shooting version is a bit under weight so it would have been to have had more metal perhaps in the barrel and lower frame. Again since the pellet shooting version is a springer you will not have any working bolts or slide catches or a built in magazine.
Pros:
It's a decent Ruger Mark IV Replica!
Feels well built overall.
Expect it to have really good accuracy like the Umarex Browning Buck Mark URX since they share similar mechanical design.
Barrel locks into place much better than the Umarex Browning Buck Mark URX did.
Fully adjustable rear sight with fiber optic front sight.
Auto locking safety, just don’t forget to unlock before each shot
Actual metal trigger in this version.
Nice and compact, not too heavy.
Full Ruger licensed via Umarex.
Fairly low price tag.
Cons:
No built in rail for a sight system like the Umarex Browning Buck Mark URX.
Would have liked a metal trigger and maybe a slightly lighter trigger pull to match the real Buck Mark's very light trigger pull.
A bit more metal would have been nice.
Significantly more expensive than the black version which is the same exact gun in a different color.
Comments: The Stainless Ruger Mark IV Break Barrel .177 Cal Pellet Pistol is a decent looking replica and a decent pellet shooting target pistol and if you own the real steel version in 22LR you may just want to get your hands on one of these Break Barrel Replica Pellet shooters. The only real question is do you get the Stainless version with simulated wood grips or the all black version? If you like the look of the stainless version and don’t care about money whatsoever, then pickup that one up since it is a Limited Edition version that will only go up in value over time. If you are on a budget and don’t mind the look of the all black versions or maybe even prefer it then by all means grab one since at the end of the day they will both perform exactly the same.
My Vimeo Table Top Review Videos for the Umarex Stainless Ruger Mark IV Break Barrel .177 Cal Pellet Pistol:
This time I have a tiny Mystery Box to unpack and show you guys, this time there are only two pistols, one is a Spring Piston Single Shot .177 Caliber Pellet Pistol and the other is a 6mm Airsoft Blowback BB Pistol, both are Licensed Replicas for Umarex. If you want to find out more about each Air Pistol then make sure to watch this Mystery Box Unboxing Preview Video!
This will be my only video this week as I am in what is called Peak Week in preparation for the Vancouver Fall Calssic Fitness show I am competing in this upcoming weekend. Peak Week really takes a lot out of me and is rather time consuming with the physical activity I am doing and daily blog styled videos I am posting for my other channel www.GetFitOver40.com.
If you are interested in what I do fitness wise then checkout that channel and follow me along this week as I hope to kick some but competing against dudes half my age.
Starting with my velocity test, I shot 3 rounds through my Chronograph using .177 caliber 7 grain lead pellets achieving 482, 489 and 466 fps with an average of 479 for the three shots. Not bad for a fairly compact Break Barrel Airgun. This is perhaps fast enough for small game like mice and small rats but you would need to get proficient on your shot accuracy to make sure you got a good head or lung shot to make it a more humane pest control.
For the accuracy portion of this Field test Shooting Review I proceeded to fire 6 rounds into a paper target setup 30 feet away. I use a semi rested shooting position with the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun resting on a sand bag up front and me sitting on a stool for stability. My 6 shot grouping was all within around 1.5 inches but I feel like this Pellet gun can do better with me getting a bit more use ot it, still not bad out of the box and with my first round shooting it.
I really like the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun as not only a Replica but it also shoed itself ot be a decent target Airgun at the end of the day. I do have to say the trigger is a bit long but not heavy at all, it has a smooth pull with a soft release. Most pimple should be able towel with this just fine. SO if you are looking for a Replica but also want an Airgun that can shoot hard and with decent accuracy then look no further than the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun.
Type:Pellet Rifle. Manufacturer: Umarex Model:HK MP7 .177. Materials: Metal and Polymer. Weight: 4.4 pounds (2kg). Barrel: 11.7 inches (29.7cm). Total Length: 31 inches (78.7cm). Propulsion: Break Barrel Spring Piston. Action: Single Action Single Shot. Ammunition Type: .177 Caliber Pellets. Ammunition Capacity: 1. Max FPS: 490 Claimed.
Trigger Pull: The trigger on the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun is single action only requiring you to break the barrel and compress the internal spring piston before you can shoot it. The actual trigger pull is pretty decent overall. There is very little take-up but the creep is on the longer side but fairly smooth requiring medium pressure. The release is a bit hard at first to predict but nothing some trigger time can’t get you use to.
Accuracy: I have not performed any shooting tests with the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun so far. I hope to make that Video Review next week. I expect the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun to perform well in the accuracy department especially with the included Red Dot Optical Scope installed. I hope the velocity rating from Umarex is based on lead pellets and not hyper velocity light weight pellets but we will find out the story when I perform my Field Test Shooting Video shortly!
Build Quality: The Umarex HK MP7 .177 Cal Break Barrel Pellet Gun is a China made Airgun but looks to be well made. It has lots of metal parts as you would expect from a Spring Piston Rifle which adds a nice weight and feel to it. I did however have an issue with the front plastic mock Suppressor/Compensator as it does not seem to be attached to the metal barrel very well other than being pressure fit which is not going to cut it with all the vibration a spring piston system makes. My first shot loosened the mock Suppressor/Compensator so I will either have to hold it when shooting or find another way to make sure it stays in place.
Realism: The Umarex HK MP7 .177 Cal Break Barrel Pellet Gun is kind of unique in this department as most break barrel rifles are not Replicas, especially the more compact sub machine gun styled ones. Umarex did good job making the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun look like a real HK MP7 for the most part. Of course it is a Spring Piston Rifle at its core so exceptions had to be made to make this work including molded non working parts like the magazine release, sector switch and, bolt/ejection port. That said all in all it is a decent looking replica considering it is a Break Barrel Airgun under the skin.
Pros:
Not many Replica Pellet Rifles on the market, especially in a more compact gun.
Comes with Red Dot sight.
Lots of rails for adding accessories to it.
Full HK Licensed by Umarex.
Collapsible Wire Stock.
Nice high claimed 490 fps.
No need for CO2 so low cost to cooperate.
Not effected by temperature like a CO2 Airgun.
Should have better accuracy than most BB Replica Airguns.
Very solid feel to it, good overall weight and feel.
Cons:
Not going to be an action shooter, have to reload after each shot.
A good overall Replica but not as Realistic or full operation as a BB version would be.
Mock Suppressor/Compensator poorly attached to barrel.
Comments: The Umarex HK MP7 .177 Cal Break Barrel Pellet Gun is an interesting product, on one hadn't it is a Replica Airgun and most people expect a Replica Airgun to have all of the appropriate working parts similar to what would be found on the real steel version. But since this is a Break Barrel Airgun at the core the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun will not function the same as the Real Steel version so as long as you don’t expect it to and appreciate the fact that it should be a nice accurate low cost to operate target rifle then I think you will understand this product and enjoy it for what it is… A Single Shot Pellet Rifle that looks a lot like a HK MP7.
As the title suggest this a video about a Huge Mystery Box so I am not going to say what’s in it, I can say that their are 4 main products mostly rifles per-say. One is a Futuristic Full Auto BB Rifle, one is a Paintball Shotgun, One is an AEG Airsoft Rifle and one is a Replica Break Barrel Pellet Rifle.
So I have a lot of variety here to show everyone! I did absolutely zero research on any of the products I show in this video since like you I had no real idea what was inside other than how many and that most where rifle based.
Enjoy finding out what new products I will be reviewing over the next month with dedicated Table Top and Field Test Shooting videos.
In this Field Test Shooting Video I get outside for a change and test out the Beeman 1042 .22 Caliber Break Barrel Pellet Rifle to see what the actual velocity is and what kind of accuracy I can expect shooting at much further ranges than my Sea Can Airgun Range can offer. If you want to know more about specifications and details for this Break Barrel Air Riffle make sure to watch my Table Top Video for information along with more closeup video.
Starting with the velocity for the Beeman 1042 .22 Caliber Break Barrel Pellet Rifle, Beeman claims up to 475 fps but based on how light the spring feels when cocking this Airgun I was not expecting to get that high of fps. I placed 5 rounds through my Chronograph and was able to average 361 fps using 14.3 grain lead pellets which gave me an energy of 4.14 foot pounds. This isn’t bad in terms of energy but I would not suggest this Air Rifle for pest control because of the lower fps unless you are shooting really small pests at closer ranges.
While I was testing velocity to speed things up I also placed the same rounds on my paper target setup around I would say 80 feet down range (Best guess). Keep in mind I am not the best long range shooter especially with Spring Piston Air Rifles but I was able to get around a 3 inch 5 shot grouping at this distance with three of the shoots all within about 1 inch of each other so not bad for me. I was using the provided Beeman 4x30 optical scope which was nice and crips. My pellet choice was .22 Caliber Crosman Premier Hollow Point 14.3 grain lead Pellets.
What I like about the Beeman 1042 .22 Caliber Break Barrel Pellet Rifle is the easy to cock break barrel, the optical scope, the nice wood finish and its overall performance. I did feel the trigger was a bit heavy and it would be nice to have just a bit more power but that would come at a harder to cock break barrel. If you want an easy shooting and overall good looking lower cost Spring Piston Pellet Rifle in .22 caliber then I would recommend the Beeman 1042 .22 Caliber Break Barrel Pellet Rifle for sure!
Type:Pellet Rifle. Manufacturer: Beeman Model:Longhorn II 10611. Materials: Metal and Polymer. Weight: 8.5 pounds (3.77kg). Barrel: 18 inches (45.7mm). Propulsion: Spring Piston. Action: Single Action Single Shot. Ammunition Type: .177 and .22 Caliber Pellets. Ammunition Capacity: 1. Max FPS: 495 Claimed.
Trigger Pull: The trigger on the Beeman Longhorn II 10611 .177 .22 Break Barrel Pellet Rifle is single action only requiring you to break the barrel and compress the internal spring piston before you can shoot it. This will also engage the safety which you have to disengage for each shot manually as an added safety measure. The actual trigger pull is pretty good overall. There is very little take-up but the creep is on the longer side but very smooth not requiring too much pressure. The release is also smooth but will take a bit of time to learn just exactly when it is going to release. There is an adjustment screw for the trigger but it is not advertised or explained in the manual exactly how this effects the trigger pull so a bit of trial and error may improve the trigger feel.
Accuracy: I have not performed any shooting tests with the Beeman Longhorn II 10611 .177 .22 Break Barrel Pellet Rifle so far, I hope to make that Video Review next week “weather permitting” as I want to get outdoors for this test to be able to shoot it at longer ranges. I expect the Beeman Longhorn II 10611 .177 .22 Break Barrel Pellet Rifle to perform well in the accuracy department especially with the 4x32 optical scope installed. In terms of power I did notice that the spring does seem ot be fairly strong so I am hoping to get close to the claimed 495 fps even using .22 caliber heavier grain pellets.
Build Quality: The Beeman Longhorn II 10611 .177 .22 Break Barrel Pellet Rifle is a China made Air Rifle but looks to be well made. It is mostly metal other than the synthetic modern stock, even the iron fiber optic sights are full metal front and back. I am not a big fan of the stock texture patter but it does work to add extra grip.
Realism: The Beeman Longhorn II 10611 .177 .22 Break Barrel Pellet Rifle is not a copy of any real steel gun in production but does have that overall rifle shape to it so yet it looks like a gun but most people will be able to immediately see that it is a Pellet Rifle and that is exactly what it is since it is not trying to be anything other than that.
Pros:
Comes with two barrels for .177 and .22 caliber pellets.
Comes with included 4x32 scope and ring mounts.
Durable synthetic stock with modern look and pistol grip.
Can also shoot using included iron metal fiber optic adjustable sights.
Automatic trigger safety system.
Rated at 495 fps using .22 caliber pellets so top out at max Canada legal power without a firearms license.
Nice rubber butt-pad looks good and adds to shooting comfort.
Has a scope stop so your scope will stay nicely in place.
Really well priced for what you get which is two rifles one.
Cons:
Changing out barrels does require tools.
Not a big fan of the stock texturing pattern.
Made in China.
Comments: The Beeman Longhorn II 10611 .177 .22 Break Barrel Pellet Rifle is a very affordable Break Barrel Spring Piston Pellet Rifle that offers two Airguns in one with it’s interchangeable barrel system allowing you to shoot either .177 or .22 Caliber pellets. You also have the option of using the already installed Fiber Optic fully adjustable sights or you can install the included 4x32 Optical Scope for potential longer range shooting. The modern looking synthetic stock with it’s pistol grip and rubber butt-pad will make shouldering this Air Rifle super comfortable and I would imagine help with accuracy at the end of the day.
In this Preview Unboxing Video I showcase three Pellet Guns from Beeman, one Single Stroke .177 Caliber Pellet Pistol and two Break Barrel .177 and .22 Caliber Pellet Rifles. I don’t go into a lot of details on each Airgun as I am leaving that information for my future Table Top and Field Test Videos. This video is mainly a heads up on these products with links to where you can buy them in our Online Replica Airgun Store.
