Entries in Accessory

Entries in AirVenturi

Air Venturi 3000 PSI Aluminum HPA Tank with Stock and Adapter Field Test Review (Sort of)

1 Comment

I will say right off the bat this Field Test Shooting Video for the Air Venturi 3000 PSI Aluminum HPA Tank with Stock and Adapter did not go as well as I would have wanted it to! The HPA tank itself worked really well but I believe the adapter was faulty as it was destroying the seals on my tank and not regulating very well.

I still wanted to publish this video regardless as not all reviews go as planned, some fail horribly but I would rather be honest and transparent about it rather than have you believe every product is a perfect.

There will always be problems even with really great products there can be defects. I plan to get a new adaptor and try this Field Test Review Video again but for now you can have some fun watching me at least have some success using the Air Venturi 3000 PSI Aluminum HPA Tank with Stock on my Rap4 Rap5 MP5.

You can also watch my Table Top Review Video for more details and info on this product!

Categories: 4.5mm / .177 cal, Accessory, BB, Bulk Air, Field Test, Full Auto, Full Auto Fun, Review, Rifle, Semi Auto, YouTube Video Tags: AirVenturi, RAP4, RAP5 4.5 BB, Sig MPX, Sig Sauer ASP

Air Venturi 3000 PSI Aluminum HPA Tank with Stock and Adapter Table Top Review

No Comments

Type: Airgun Accessory.
Manufacturer: Distributed by Air Venturi.
Model: Air Venturi 3000 PSI with Stock & Adapter Aluminum Tank.
Materials: Aluminum.
PSI: 3000.
Capacity: 13 CU.
Output PSI: 1100.
Diameter: 2 inches.
Length: 10 inches.
Features: Two ASTM burst disks, integrated pressure gauge.
Accessories included: Buttstock, CO2 Adapter.

In this Table Top Review Video I go over the features and benefits of the Air Venturi 3000 PSI with Stock & Adapter Aluminum Tank system, what to expect and some of the Pros and Cons for it.

I will also be following up my Table Top video with a Field Test Shooting Video to see what possible advantages and disadvantages the Air Venturi 3000 PSI with Stock & Adapter Aluminum Tank has in a real world test of its performance, hopefully all advantages!

Pros:

  • Compact and is the perfect size to use as a rear buttstock for various 88 Gram and or HPA rifles.

  • Smaller tank means if you are using a foot pump it won’t take all day to fill up :)

  • Comes with adapter so can be used with regular HPA and 88 Gram CO2 systems.

  • Regulated to 1100 psi so should perform better in terms of max velocity and consistency compared to CO2 which is around max 800-900 psi with velocity being effected by cool down.

  • Not effected by colder temperatures compared to CO2.

  • Once you have this tank the cost is virtually nothing to shoot compared to expensive 88 Gram CO2 cartages. You just need to buy your pellets or BB’s.

Cons:

  • Still takes a while to pump up using a foot pump system.

  • Higher initial cost ($195) than simply buying 88 gram CO2 cartages when you need them.

  • Will need access to a pump or compressor to use it.

  • Doesn’t look as good as the supplied buttstock at least with the Sig Sauer MCX and MPX.

Comments:

I guess the question is who is this for? If you are a casual shooter that perhaps owns the Sig MPX or MCX or even another 88 Gram CO2 Air Rifle that the Air Venturi 3000 PSI with Stock & Adapter Aluminum Tank would work with then this may be a bit expensive especially if you don’t have a way to pressurizer the tank at home. On the other hand if you already have a foot pump or air compressor or easy access to one and maybe you have other HPA or CO2 based airguns this tank will work with then it’s kind a no brainer to get it. Maybe you juts want a system that gives you maximum and consistent velocity no matter how cold it is outside. All good reasons to get one in my books.

Categories: Airsoft, Accessory, BB, Bulk Air, CO2, Paintball, PCP, Pellet, Pistol, Review, Rifle, Semi Auto, YouTube Video, Full Auto Tags: AirVenturi

Air Venturi HPA Tank - KJWorks M9A1 GBB - EMG Combat Master - Crosman P1 - ASG TAC-6 Update Preview Video

No Comments

In this Update Preview Unboxing Video I take a look at 5 products that came across my table and that I have not reviewed so far on the Replica Airguns YouTube channel.

First I show off an HPA tank from Air Venturi that works perfectly for the Sig Sauer MPX and MCX Pellet Rifles allowing for more consistent fps and I would image a higher overall fps? We will find out when I test it out in the replica Airguns Indoor Sea Can Airgun Range.

  • 13 Oz Aluminum

  • 10 Inches Long

  • 2 Inches Diameter

  • Integrated Pressure Gauge

  • Includes Buttstock

  • CO2 Adaptor Included

  • 3000 PSI Fill

  • 1100 PSI Regulated

Next I take a look at the KJWorks M9A1 GBB Airsoft Pistol, I hover revived the CO2 version before but this version comes with the Gas magazine rather than the CO2 mag for those that prefer gas operated Blowback Airsoft Pistols. Because of the slightly lower FPS the Gas version comes with a barrel extension to make it Canada import friendly.

  • 6mm Airsoft BB’s

  • Green Gas / Propane

  • 370 fps

  • 25 Round Magazine

  • 2 Pounds

Probably one of the most interesting product I look at in this video at least for me is the EMG JW3 Combat Master GBB Airsoft Pistol. This Airsoft pistol is mainly aluminum with some polymer based off of the 2011 STI and was featured in the 2019 John Wick 3 Film. I’m really looking forward to testing this one out in the Sea Can Replica Airguns Airgun Range!

  • 6mm Airsoft BB’s

  • Green Gas / Propane

  • 9.4 Inches

  • 366 fps

  • 28 Round Magazine

  • 2.4 Pounds

Moving along to another Air Pistol I finally get my hands on the Crosman P1 which is really just a KWC PT92 4.5mm Blowback CO2 BB Pistol but with Crosman Branding and an included laser. Since I have never shot a PT92 BB Pistol with a laser I will probably make a Field Test Shooting Video to see how well it performs.

  • 4.5 mm Steel BB’s

  • CO2 x 1

  • 4.2 Inch Barrel

  • 330 fps

  • 19 Round Magazine

  • 2.4 Pounds

  • Comes with Laser Sight

Last up I take a look at the ASG TAC-6 which is pretty much the exact same ASG TAC-4.5 CO2 Air Rifle I tested a while back but in this case the 6 refers to it being a 6mm Airsoft Rifle rather than a 4.5mm Steel BB Riffle. I am not sure I will do a full Table Top Video since these guns are virtually identical but just in different Ammo types but I hope to get outside and see how well it performs shooting at a bit more distance than the 30 foot indoor range I usually test my Airgun in.

  • 6mm Airsoft BB’s

  • CO2 x 1

  • 36 Inches

  • 440 fps

  • 15 Round Magazine

  • 3.5 Pounds

Categories: 4.5mm / .177 cal, 6mm, Accessory, Airsoft, BB, Blowback, Bulk Air, CO2, Gas, GBB, PCP, Pistol, Replica Airguns News, Review, Rifle, Semi Auto, YouTube Video Tags: AirVenturi, KJWorks, M9A1, EMG, Combat Master, Crosman, Crosman P1, ASG, TAC-6

June Update with New Products from Sig Sauer - Crosman - KWC - Air Venturi - Pocket Shot

No Comments

Again I have some new products to show everyone. Some we got a bit of a preview of when I was at SHOT Show 2019 earlier this year but now I have them in my hands to show off and of course will be doing full Table Top and Filed Test for anything new as soon as I can get to them.

Starting with Sig Sauer, they sent me their brand new Sig Sauer P365 CO2 Blowback BB Pistol. This was probably one of my favorite new Air Pistols at SHOT Show simply because it is so small and somehow Sig was able to find a way to put a full size drop out metal magazine that holds both the CO2 and BB’s in it. This is one I am really looking forward to testing out in the Indoor Sea Can Airgun Shooting Range.

Another fantastic product is Crosman’s DPMS Full Auto CO2 BB Rifle which was pretty much perfect the first time around. Well at SHOT Show this year Crosman updated it a bit mainly with some cosmetic changes and now is offering the Crosman MPW, a slightly shorter version of the DPMS and now with an AR Compatible Stock for customizing your Crosman’s MPW Full Auto CO2 BB Rifle.

Yet one more item I was drooling over at SHOT Show 2019 where the Air Venturi Springfield Arms XDM Air Pistols being offered in GBB Airsoft and CO2 BB models along with 3.8 and 4.5 inch versions. It looks like the GBB Airsoft venisons where first out of the factory and I was able to get them in two styles, the Air Venturi Springfield Arms XDM 3.8 GBB Airsoft and Air Venturi Springfield Arms XDM 4.5 GBB Airsoft.

So maybe not as exciting… I also take a look at a NBB CO2 BB Makarov from KWC that is pretty basic but is much less expensive and will offer higher FPS and more shots per CO2 being that it is Non-blowback Airgun. It will be interesting to see how it compares performance wise to the KWC Full Blowback CO2 BB version.

Last but also super cool and I know it’s not really as Airgun related but still something I think everyone will be interested in is the Pocket Shot Pro Arrow Pouch with D-Loop. I reviewed the Pocket Shot “Slingshot” a while back, this new product allows you to use standard Arrows with their new Arrow Pouch getting around 40 pounds of pull and it comes with a trigger release. By the way the Pocket Shot Pro Arrow system is legals to hunt deer with in most US States, I’m not sure about Canada but perhaps here too?

Categories: 4.5mm / .177 cal, 6mm, Accessory, Airgun News, Airsoft News, BB, Blowback, CO2, Full Auto, Gas, GBB, Non Airguns, Pistol, Replica Airguns News, Review, Rifle, Semi Auto, YouTube Video Tags: KWC, Makarov PM, Crosman, Crosman MPW, Bushmaster MPW, SIG Sauer P365, Sig Sauer ASP, AirVenturi, Springfield Armory, XDM, Pocket Shot, Pro Arrow Pouch

AirVenturi ISSC M22 BB Pistol - John Wayne Duke SAA BB Revolver Preview

No Comments

I just got some really interesting new guns and shooting accessories I wanted to share with everyone in this Vimeo Video Preview!

First off, I have some metal targets designed for Airguns, you can shoot them with lead pellets and heavy gram Airsoft BB's but be sure not use standard 4.5mm steel BB's as they can ricochet and come back at you at high velocity. That is unless you are using the new Excite Low Ricochet Smart Shot BB's I also showcase in this video.

A couple other accessories I highlight are a Western Leather Gun Slinger Belt and Holster which pair up perfectly with the first BB gun I have to show you today. Most of you should be familiar with the Umarex Colt Single Action Army Revolvers I have made several reviews and videos for, they are super popular and for good reason. How about a John Wayne Duke Version available in Stainless and Antique versions? I thought you would like that!

Next up and probably the item I am most excited to introduce to everyone is the ISSC M22 4.5mm CO2 BB Pistol. I actually own the  first generation ISSC M22 in 22LR, the same gun this BB pistol is based on. It seems to have everything going for it and I was happy to discover after making this video that it does in fact have blowback operation even though this is not state on the box or in the manual? The ISSC M22 really is a beautiful pistol and I am totally looking forward to reviewing it. If you're a Glock fan this is about as close as we can legally get to owning a replica Glock BB pistol since Glock has OK'd production of the real steel ISSC MK22 in its new form.

I will be working with my suppliers to make these items available in our Replica Airguns Stores as soon as we can...

Categories: 4.5mm / .177 cal, Accessory, BB, CO2, Pistol, Review, Revolver, Semi Auto, YouTube Video Tags: AirVenturi, Colt Single Action Army, Duke, ISSC M22