Type: BB Rifle. Manufacturer: Sig Sauer ASP Model: Sig Sauer MCX Rattler Materials: Metal and Nylon Fiber build. Weight: 4.6 Pounds (2.1 kg). Barrel: 7 inch (17.8 cm) steel non-rifled. Propulsion: Single 12 gram CO2. Action: Semi auto and 3 round burst with internal blowback (single action only trigger). AmmunitionType: 4.5mm Steel BB’s. AmmunitionCapacity: 30 rounds spring fed. Velocity: Claimed of 325 fps.
TriggerPull: The trigger pull on the Sig Sauer MCX Rattler CO2 BB Rifle is a single action only trigger that requires initial activation of the charging handle, after the first shot the internal blowback action will do this automatically for each followup shot. The single action only trigger is fairly short with a light pull and predictable release, great for action shooting. You also have the option of shooting in true semi auto (one trigger pull and one shot) or selecting 3 round burst mode which allows for one pull of the trigger with 3 rounds in full auto.
Accuracy: I really don’t have much feedback to give here as I have only shot a single magazine so far with the Sig Sauer MCX Rattler CO2 BB Rifle in a very uncontrolled format as I was not so much testing it out but rather just having some initial fun to see what it was all about. I will of course be following up this Table Top Review with a Field Test Review shortly to find out what the actual velocity is and see how accurate it is in both semi auto and 3 round burst mode.
BuildQuality: The build quality for the Sig Sauer MCX Rattler CO2 BB Rifle is really good considering it is mostly all plastic on the outside. It does feel solid and well built when holding it in the hand. From what I can tell the metal parts would include the barrel, the charging handle, the main controls and also much of the internal components inside both the rifle and the magazine. I would have liked to have seen a metal flash hider and perhaps the pop-up Iron sights could have also been metal.
Realism: The Sig Sauer MCX Rattler CO2 BB Rifle is a 1 to 1 scale very realistic Replica of the real steel Sig Sauer Rattler normally chambered in 5.56 NATO. It would have been nice if the dust cover opened up when charging the Airgun for realism but most of the other controls work as expected, like the charging handle, selector switch, magazine release and I am not sure but maybe even the bolt release, I will know more when I make my Field Test Shooting video for the Sig Sauer MCX Rattler.
Pros:
Perfect size and weight for a fun BB semi / full auto shooter.
Fully adjustable pop up sights that are usable in both the down and up position,
Lots of accessory mounting options with the picatinny top rail and MLOCK in the sides and bottom.
Folding rear stock allows for a compact size and much easier transportation.
Ambidextrous selector switch.
Can shoot in both semi and 3 round burst modes.
Very solid AR15 type magazine that holds the 30 4.5mm steel BB’s and the single 12 gram CO2.
Reasonably priced at around $250 at the time of this video.
Sig Sauer licensing.
Cons:
Only uses a single CO2, two would have been better in a fast action shooter like this to maintain fps.
325 fps seems a bit low.
Lots of plastic but build quality does feel good.
Comments:
The Sig Sig Sauer MCX Rattler CO2 BB Rifle reminds me a lot of the Umarex Steel Storm and Steel Force which are both Compact AR type Semi and Burt mode 4.5mm CO2 Blowback Airguns. Where the Sig Sauer MCX Rattler CO2 BB Rifle shines, is in the quality and realism as compared the Umarex counterparts. I do like that both the Umarex Steel Storm and Steel Force use dual 12 gram CO2 cartridges which I feel allows them to have more consistent velocity and performance as compared to the single CO2 in the Sig Sauer MCX Rattler CO2 BB Rifle. My First impressions without really testing the Sig Sauer MCX Rattler are all pretty positive but it will really come down to how well it performs and so I will put my recommendations on hold until I actually test it out!
My Table Top Review of the Sig Sauer MCX Rattler CO2 BB Rifle:
This is not exclusive to Airguns since trends of Airguns are highly influenced by what type of Real Steel Pistols are popular to people. This is often based on what people see portrayed in movies and TV Series, and also promoted online. There is for sure an overlap in what is popular and it is hard to say what is influencing what? Is it the popularity of Pistols out in the real world that influences what we see being used in the movies and on TV? Or is it what we see in Movies and TV that influences our choices of pistols out in the real world? Perhaps it is a combination of both?
My list is based on my own personal experience and does not represent the entirety of types of Pistol designs available.
Type:BB Pistol. Manufacturer: Sig Sauer Model:1911 Emperor Scorpion. Materials: Mostly all metal build. Weight: 2.1 pounds (953 Grams). Barrel: 4.3 inches (109.2mm) - Non-rifled. Propulsion: 12 gram CO2. Action: Blowback single action only. Ammunition Type: 4.5mm Steel BB's. Ammunition Capacity: 16 round full size drop out metal magazine. Max FPS: 300+.
Trigger Pull: The Single action only trigger pull on the Sig Sauer 1911 Emperor Scorpion Blowback CO2 BB Pistol is typical of what you will find on a KWC Blowback 1911, and that’s a good thing since it is short light and crisp similar to a real 1911 semi auto pistol.
Accuracy: I haven’t done my official field test shooting video so I can not comment exactly on how well this version of the KWC 1911 series will perform, but since I havre reviewed many similar versions of the KWC 1911, it should shoot similarly. That said I hope to expect a velocity around 300-330 fps and a 10 shot grouping between 1.5 and 2.5 inches.
Build Quality: The Sig Sauer 1911 Emperor Scorpion Blowback CO2 BB Pistol like the other KWC 1911 Blowback BB Pistols has in a sense been perfected over time as the Original Tanfoglio Witness 1911 I Review came out over a decade ago and although it did have a few problems at first with the safety it all got worked out in the end and versions today are well made and reliable. As with all Airguns the metals used are not firearms grade quality so you do need to be a bit more careful with them but if you do you will get years of use out of them.
Realism: The Sig Sauer 1911 Emperor Scorpion Blowback CO2 BB Pistol is a lsenced replica of the real steel Sig Sauer 1911 Emperor Scorpion 45 ACP and from looking at photos on line or the Sig Sauer 45 APC version it is virtually identical in a appearance other than the hammer which on the 45 ACP version seems to have a larger and more oval skeletonized opening. That’s pretty minor in the scheme of things. As this is a full blowback Air Pistol, the mechanical functions mimic the real steal version very well and as expected you can even fully field strip this BB Pistol.
Pros:
Based on the tried and true KWC 1911. Most parts should be mix and match.
Full blowback operation.
Excellent SAO 1911 trigger as expected.
Full metal construction, has great realistic weight to it.
Easy to see white dot sights front and back.
Tactical with ambidextrous safety controls.
Rail for adding on accessories like a laser or Tac light.
Nice reassessed barrel ads to the realism.
Love the two tone color scheme.
Full Sig Sauer licensing.
Looks virtually identical to the real steel Sig Sauer 1911 Emperor Scorpion..
Cons:
Will go through CO2 fairly quickly.
Lower fps because of full blowback operation.
Sights are none adjustable.
Comments: Every time a new Blowback 1911 Airgun comes out I seem to say this one is my new favorite and well here we go again… Not only do I like 1911’s I also really like Sigs. I also seem to be a fan of town tone guns as it makes the parts on the gun really stand out in contrast to each other and I like that look. So when you put all of these things together it makes for a real winner in my books. With so many Blowback 1911 choices out there it is hard to make up ones mind, I would consider the Sig Sauer 1911 Emperor Scorpion Blowback CO2 BB Pistol to be in the top 3 for sure!
In this Table Top Comparison Vimeo Video I take a look at the full line of Sig Sauer distributed Replica CO2 Blowback Airguns and pick out my favorite 4.5mm Steel BB and .177 Caliber Pellet shooters out of the bunch. You will have to watch the video to see what my two picks are!
This Table Top Comparison video is also a bit of a revisit since I reviewed the US version of the Sig Sauer ASP MPX .177 Cal. Pellet Rifle back in 2016 when it first came out. I actually had to go across the border and bring it back across with me which can be a lot of fun dealing with Canada Customs border agents. They are well meaning but often don’t fully understand their own import guidelines for Airguns. After about an hour or so I was able to convict the CBSA officer that no my Sig Sauer Airguns where not regulated Firearms and no they did not require any registration or transfer permits.
Anyway that was 5 years ago and now we have the Canada import version which makes purchasing one of the Sig Sauer ASP MPX .177 Cal. Pellet Rifles so much easier and to be honest there really isn’t any difference as far as I can tell since my original US version even though it had a claimed fps of up to 600 was actually closer to somewhere in the mid 400’s using standard .177 caliber lead pellets.
Below are the basic specifications and if you want more info than that either watch the video or checkout my Original Table Top Review for the Sig Sauer ASP MPX .177 Cal. Pellet Rifle since both the original US and newer Canada versions are virtually identical…
Type: Pellet Rifle. Manufacturer: Sig Sauer ASP Model: Sig Sauer MPX ASP Materials: Metal and Nylon Fiber build. Weight: 7 Pounds (3300 Grams). Barrel: 8 inch steelrifled. Propulsion: 88 or 90 Gram CO2. Action: Semi Auto,double action only. Ammunition Type: .177 caliber pellets. Ammunition Capacity: 30 rounds belt fed. FPS: Up to 575-600 fps (When shot by a Unicorn) Probably closer to around 450fps
I will be following this Tabel Top Review for the US and Canada Sig Sauer ASP MPX .177 Cal. Pellet Rifles with a Field Test Shooting Comparison to see if anything has really changed interns of velocity and accuracy so stay posted for that video coming out very soon…
This may the one of the most Airguns I have tested out at the same time here in the Replica Airguns Indoor Shooting Range. It took a little bit longer than normal but I go through it with only one of the CO2 Blowback BB Pistols acting up juts a bit at the beginning. After a quick fix the rest of the show went on the road you could say!
What exactly was the purpose of testing out 5 CO2 Blowback BB Pistols all together? I wanted to compare my most compact CO2 Blowback BB Pistols to each other to see which one performed the best in my Chronograph Velocity Test and 30 foot 10 Round Target Test. There was no definitive clear winner at the end of the day two of the Air Pistols performed almost the same and then the rest kind of lingered behind them to lesser degrees.
The Compact CO2 Blowback BB Pistol I compared in this Field Test Shooting Video are the same Air Pistols I did a Table Top Comparison earlier, so the:
If you haven’t already watched my Table Top Comparison Review for the KWA M226-LE and KJWorks KJ1060 Sig Sauer P226 Airsoft Pistols than make sure to have a look at that video if you’re interested in more of the specifications and details and some closeup shots of both Airsoft Guns.
In this Field Test Shooting Video Review I compare the KWA M226-LE and KJWorks KJ1060 Sig Sauer P226 Airsoft Pistols head to head and side by side to see how these two very similar Sig Sauer P226 Airsoft Replicas perform. They both cost about the same, are built with similar quality and look a lot alike but what I really wanted to know is how do they shoot!
First off I tested out the power of both Airsoft Guns shooting 5 consistent .20 gram Airsoft BB’s from each gun through my Chronograph. Keep in mind I was using a full magazine of propane gas in the KWA M226-LE and a brand new 12 gram CO2 in the KJWorks KJ1060 (KP-01). As CO2 is know to have more power than green gas I was expecting a bit more pop out of the KJWorks KJ1060 which I did get. The temperature in my indoor Sea Can Airgun Shooting Range was 18 degree Celsius (64 degrees Fahrenheit) so not too cold or too hot. The KWA M226-LE averaged right around 320 fps while the KJWorks KJ1060 averaged 350 fps.
Moving on to my accuracy portion of the test for the KWA M226-LE and KJWorks KJ1060 Sig Sauer P226 Airsoft Pistols. I placed fresh paper targets 30 feet down range for each Airsoft pistol and put 10 rounds into each target shooting from a rested seated position. I did not adjust the hop-up or sights for either Airsoft Pistol prior to this test to see how close to the bullseye they would get out of the box. First up was the KWA M226-LE and it performed nicely for me shooting close to the bullseye, just a little bit low but getting around a 3.5 inch 10 round group. I then followed up with the KJWorks KJ1060 (HP-01) and also shot fairly near the Bullseye out of the box but the grouping opened up just a bit resulting in a 4.5 inch 10 round group. Still respectable for a close Airsoft quarters sidearm.
At the end of the day, the KWA M226-LE and KJWorks KJ1060 Sig Sauer P226 Airsoft Pistols came out pretty close to each other in this head to head Filed Test Shooting Comparison Review. One shot a little bit harder while the other one was a little bit more accurate but neither was a standout in either category. I guess you’re going to have to flip a coin deciding on which one of these two very well made Sig Sauer P226 Airsoft Pistols you’re going to choose but either way you will be getting a winner here.
In this comparison video I look at a variety of different Sig Sauer P226 Airguns and compare them to each other to determine which one I feel is the best Sig Sauer styled Airgun. Of course my choice may not be your choice :)
In this comparison video I look at a variety of different 1911 Airguns and compare them to each other to determine which one I feel is the best 1911 Airgun, well at least for me.
Type: Air Pistol. Manufacturer: Sig Sauer Model:Sig Sauer Spartan & Max Michel 1911 Materials: Mostly all metal build. Weight: 2.06 pounds (934 Grams). Barrel: 5 inches - Non-rifled. Propulsion: 12 gram CO2. Action: Blowback single action only. Ammunition Type: 4.5mm Steel BB's. Ammunition Capacity: 16 round stick magazine. Max FPS: 410.
Trigger Pull: The trigger pull on the Sig 1911 CO2 blowback pistols is excellent! juts like a real 1911 it is single action only and both Sig Sauer 1911's have very short and very light trigger pulls. To make the shooting experience even more realistic you will need to engage the working back strap safety in order to shot these guns, again just like a real 1911.
Accuracy: I have not done my official Field Test Shooting Video for the these Sig Sauer CO2 Blowback 1911's but I did do a shooting field test for the Daisy Winchester Model 11 which these guns are built in design from. The Daisy Model 11 on a rather cold day shot around 360 fps so I am expecting better results from the new updated Sig Sauer Max Michal and Spartan especially in warmer shooting conditions. during my previous Daisy Model 11 testing I was also able to get around a 2 inch 10 shot grouping from a 30 foot shooting position.
Build Quality: Both of the Sig Sauer Spartan and Max Michel Blowback CO2 airguns are built really well, they feel solid in the hand and all the mechanical parts feel tight, the finish is also nice and does not show any signs of wearing. You will find metal parts pretty much everywhere except the magazines, even the safety, magazine release and slide catch are metal, it's kind of too bad the magazine was also not metal?
Realism: Sig Sauer modeled the Spartan and Max Michel after their real steel version and overall they are very similar with the exception that neither of the real steel version have under barrel rails, you will also find adjustable sights on both of the real steel versions and of course proper full size magazines. Other than that both the Sig Sauer CO2 Blowback 1911/s look the part and have full Sig Sauer Licensing and branding,
Good overall replica of the real steel 1911 Sig Sauer pistols.
Really nice single action trigger.
Full Sig Sauer markings and licensing.
Cam lever system for easy CO2 loading.
Working grip safety.
Can expect reasonably decent blowback feel.
Higher fps than the KWC 1911’s range.
White dot sights front and back.
Rail for accessories.
Cons:
Plastic stick magazine.
Rail would not be on the original Sig Sauer pistols.
Sights are pretty basic and none adjustable.
Would have liked a more recessed barrel.
CO2 Grip comes off pretty easily.
Comments: I know that everyone seems to like airguns with full size drop out metal magazines and yes it does make the airgun look and feel more realistic but once the magazine is in the gun the experience for the most part is the same. Having a stick magazine in this case allows for a more efficient CO2 delivery which should increase power and shots per CO2, I know a lot of people complain about the low FPS of the KWC 1911's so if this is you then perhaps you then you may need to give up a full size mag for more power and shots per CO2? Other then the stick mag issue both the Sig Sauer Spartan and Max Michel are really nice CO2 Blowback Airguns and I am really hoping they perform well when I get to my field test shooting review shortly.
My Vimeo Table Top Review of the Sig Sauer Spartan & Max Michel Blowback CO2 BB Pistols:
Make sure to watch my Vimeo video for this Comparison Review as I go into a lot of detail about the similarities and difference with each of these CO2 Blowback Pellet Guns.
All of these CO2 blowback pellet guns are made for each company in Japan (I am assuming from the same factory?)
All of the listed Pellet Airguns shoot .177 caliber pellets (Can be Alloy or Lead)
They all have double sided rotary stick magazines that hold 8 rounds on each end for a total of 16 shots per magazine.
All of the Airguns use 12 gram CO2.
All compared pellet guns have Blowback operation.
All of these pellet pistols have single and double action triggers except for the Gamo MP9 which is single action only and needs to be charged on the first shot.
They all have rifled barrels.
Here is where we find some key differences between these CO2 Blowback Pellet Pistols:
Trigger Pull: The trigger pull on the Sig Sauer ASP P250 CO2 Blowback .177 Caliber Pellet Pistol is a lot better than I thought it was going to be. The blowback operation does place the hammer in the cocked position for single action type shooting but the the trigger is still required to index or advance the next pellet to line up with the barrel. Because of this, trigger pull is full length even in single action mode but you can barely feel any added friction from the indexing of the rotary magazine. All of this makes for a slightly longer trigger pull but one that is light weight with a fairly nice and easy release. For some reason the Sig Sauer P226 trigger does feel a little smoother with a slightly easier release.
Accuracy: I have not done my official Field Test Shooting Video with the Sig Sauer ASP P250 CO2 Blowback .177 Caliber Pellet Pistol and I am not sure when I am going to get the chance to do so since I am waiting on a replacement Chronograph for my velocity portion of my testing. That said I can say that Sig has already done some of the work for me and conducted their own "real world" velocity testing for their ASP line of CO2 Pellet Guns. Sig tested both a standard 8.18 grain lead pellet and a high velocity 5.25 grain alloy pellet shooting an 8 shot string with each to find out average fps performance for both pellet types. The 8.18 grain lead pellet average 353 fps while the 5.25 grain alloy pellet average 399 fps. In terms of accuracy, I was able to get just under a 2 inch 16 shot well centered grouping on two separate 30 foot back tests which is pretty decent. I did notice that when shooting a 16 shot string, the first and last shot velocity will vary a fair amount as the CO2 cools the gun and lowers the fps. I would recommend taking your time in-between reloads to let the Sig Sauer ASP P250 CO2 Blowback .177 Caliber Pellet Pistol warm back up.
Build Quality: The Sig Sauer ASP P250 CO2 Blowback .177 Caliber Pellet Pistol is a bit on the lighter side coming in around 1.5 pounds since it does incorporate both metal and plastic construction. You will find the Sig Sauer P250 has a metal slide and plastic frames similar to the real steel version. Weighing it at 1.45 pounds, the P250 is lighter then a standard Sig Sauer P250. Sig claims that their entire APS line of pellet guns is life tested for 15,000 shots so you know this gun is going to last and provide years of shooting fun. The fit and finish seem really good, so far no real paint or finish problems and all mechanically everything is operating as it should.
Realism: The Sig Sauer ASP P250 CO2 Blowback .177 Caliber Pellet Pistol is a very close replica of the real steel Sig Sauer P250. I really like the fact that the safety also works as a working decoker just as it would on the real Sig P250. Other similar working parts are the magazine release and the hammer that stays back for true single action shooting. The slide catch release and take down leaver are purely for show but they are not moulded in parts so they look good and realistic. One slight disappointment for me is when a gun does not have a cut out ejection port, that is the case with both the Sig Sauer ASP P226 and P250 but it does not take away from the shooting fun in any way.
Good overall replica of the real steel Sig Sauer P250.
Designed by Sig and made in Japan, fully Sig Sauer licensed.
Nice heavy blowback operation.
It might feel a bit light weight at first but out of the two Sig Sauer ASP pellet pistols this one seems to shoot a bit better.
Got respectable accuracy and seemed to shoot pretty hard.
Safety works as the de-cocker same as the real Sig Sauer P250.
White dot sights and accessory rail.
Great feel to the trigger not heavy or sticky in any way.
Cons:
Shots tended to slow down a bit near the end of a 16 shot strong as the gun cooled down.
Sight are non adjustable.
Ejection port is not cut out.
Comments:
What I really like about the Sig Sauer ASP P250 CO2 Blowback .177 Caliber Pellet Pistol is that like all the other APS Airgun from Sig, it is a product that Sig has decided to invest a lot of their time and effort to develop rather then simply grab an existing Airgun product from a manufacturer and slap their license on it. Sigs product ingenuity is what will help to improve the airgun industry overall. Getting back to the Sig Sauer ASP P250 CO2 Blowback .177 Caliber Pellet Pistol, it may feel a bit light weight at first but the heavy blowback will rock you unexpectedly! I found in terms of comparison to the Sig Sauer ASP P226, the P250 was more accurate and well centered on target for me as well. If you're a Sig Sauer P250 owner you are for sure going to want to pick yourself up one of these ASP CO2 Blowback Airgun versions so you can get some extra practice time in for pennies per shot and the ability to shoot in a lot more locations..
My Vimeo Table Top Review of the Sig Sauer ASP P250 CO2 Blowback .177 Caliber Pellet Pistol:
Trigger Pull: The trigger pull on the Sig Sauer ASP P226 CO2 Blowback .177 Caliber Pellet Pistol is a lot better than I thought it was going to be. The blowback operation does place the hammer in the cocked position for single action type shooting but the the trigger is still required to index or advance the next pellet to line up with the barrel. Because of this, trigger pull is full length even in single action mode but you can barely feel any added friction from the indexing of the rotary magazine. All of this makes for a slightly longer trigger pull but one that is light weight with a fairly nice and easy release.
Accuracy: I have not done my official Field Test Shooting Video with the Sig Sauer ASP P226 CO2 Blowback .177 Caliber Pellet Pistol and I am not sure when I am going to get the chance to do so since I am waiting on a replacement Chronograph for my velocity portion of my testing. That said I can say that Sig has already done some of the work for me and conducted their own "real world" velocity testing for their ASP line of CO2 Pellet Guns. Sig tested both a standard 8.18 grain lead pellet and a high velocity 5.25 grain alloy pellet shooting an 8 shot string with each to find out average fps performance for both pellet types. The 8.18 grain lead pellet average 359 fps while the 5.25 grain alloy pellet average 403 fps. In terms of accuracy, I was able to get about a 2 inch 16 shot grouping on two separate 30 foot back tests which is pretty decent. I did notice that when shooting a 16 shot string, the first and last shot velocity will vary a fair amount as the CO2 cools the gun and lowers the fps. I would recommend taking your time in-between reloads to let the Sig Sauer ASP P226 CO2 Blowback .177 Caliber Pellet Pistol warm back up.
Build Quality: The Sig Sauer ASP P226 CO2 Blowback .177 Caliber Pellet Pistol is a very solid feeling pistol with its all metal construction. Weighing it at 2.35 pounds, it is actually a tad bit heavier then the real steel version but not by much. Sig claims that their entire APS line of pellet guns is life tested for 15,000 shots so you know this gun is going to last and provide years of shooting fun. The fit and finish seem really good, so far no real paint or finish problems and all mechanically everything is operating as it should.
Realism: The Sig Sauer ASP P226 CO2 Blowback .177 Caliber Pellet Pistol is a very close replica of the real steel Sig Sauer P226, I would say it most closely takes after the MK-25 Threaded Barrel version. I really like the fact that the safety also works as a working decoker just as it would on the real P226. Other similar working parts are the magazine release and the hammer that stays back for true single action shooting. The slide catch release and take down leaver are purely for show but they are not moulded in parts so they look the part. One slight disappointment for me is when a gun does not have a cut out ejection port, that is the case with both the Sig Sauer ASP P226 and P250 but it does not take away from the shooting fun in any way.
Good overall replica of the real steel Sig Sauer P250.
Really solid feeling gun, has awesome weight to it with it’s all mental construction, pretty close in weight the real steel version.
Designed by Sig and made in Japan, fully Sig Sauer licensed.
Nice heavy blowback operation.
Got respectable accuracy and seemed to shoot pretty hard.
Safety works as the de-cocker same as the real Sig Sauer P226.
White dot sights and accessory rail.
Super easy CO2 loading system, no having to tighten a CO2 tab.
Great feel to the trigger not heavy or sticky in any way.
Cons:
Shots tended to slow down a bit near the end of a 16 shot strong as the gun cooled down.
Sight are non adjustable.
Ejection port is not cut out.
Comments:
What I really like about the Sig Sauer ASP P226 CO2 Blowback .177 Caliber Pellet Pistol is that like all the other APS airguns from Sig, it is a product that Sig has decided to invest a lot of their time and effort to develop rather then simply grab an existing arigun product from a manufacturer and slap their license on it. Sigs product ingenuity is what will help to improve the airgun industry overall. Getting back to the Sig Sauer ASP P226 CO2 Blowback .177 Caliber Pellet Pistol, it's a really solid CO2 Pellet pistol that is a lot of fun to shoot and for Sig Sauer P226 owners, the pellet shooting airgun version offers a super economical and safe way to get some practice in using a product that looks, feels and shoots similarly to their real steel counterpart.
My Vimeo Table Top Review of the Sig Sauer ASP P226 CO2 Blowback .177 Caliber Pellet Pistol:
Type: Pellet Rifle. Manufacturer: Sig Sauer ASP Model: Sig Sauer MPX ASP Materials: Metal and Nylon Fiber build. Weight: 7 Pounds (3300 Grams). Barrel: 8 inch steelrifled. Propulsion: 88 or 90 Gram CO2. Action: Semi Auto,double action only. Ammunition Type: .177 caliber pellets. Ammunition Capacity: 30 rounds belt fed. FPS: Up to 600 fps (When shot by a Unicorn)
Trigger Pull: The trigger pull on the Sig Sauer MPX ASP .177 Caliber Pellet Rifle is actually pretty decent when you consider the first part of the trigger pull is used to advance the belt fed 30 round magazine. One would think that there would be a lot of added friction from the belt but this does not seem to be the case. There is some internal blowback action going on but it is only used to cock the internal hammer/striker which does lesson the overall amount of trigger pull required. The trigger pull is shorter than expected with all that is going on and it's not overly heavy so quick and predictable action shooting is very possible with the Sig Sauer MPX ASP .177 Caliber Pellet Rifle.
Accuracy: So far I have not done my official Field Test Shooting Video for the MPX ASP .177 Caliber Pellet Rifle but I did have the chance to get out and shoot some rounds down range at my Sig provided Quad Shooting Gallery that I had setup about 35-40 feet away. Even though I did not have my red dot all perfectly sighted in I was still able to hit the smallish metal targets fairly well using the Sig Sauer MPX ASP. In terms of velocity you can expect from the Sig Sauer MPX ASP .177 Caliber Pellet Rifle, 600 fps is a bit optimistic. Sig did send me a real world fps performance spread sheet they had conducted using both 5.25 grain alloy pellets and 8.18 grain lead pellets shooting 8 rounds and averaging out the fps. The 5.25 grain pellets averaged in at just over 500 fps while the heavier 8.18 grain pellets came in with an average of just under 450 fps. Pretty much what I would expect from a shorter barreled CO2 rifle.
Build Quality: The build quality for Sig Sauer MPX ASP .177 Caliber Pellet Rifle is excellent, you can tell Sig Sauer had a lot of hands on in the design and production of this Pellet Shooting Air Rifle! The materials used and fit and finish are top notch and the mechanical function again is really good, I am kind of amazed at how well their belt fed rotary magazine design works in terms of feeding and operation. So far I have not experienced any pellet feeding problems at all using both lead and alloy flathead pellets.
Realism: The Sig Sauer MPX ASP .177 Caliber Pellet Rifle is for the most part designed to be used as a side by side optional training aid for the real steel Sig Sauer MPX Rifle. Sig wanted the pellet version to look and feel as close as posable and Sig has done a good job with this. Other than the lessor recoil and noise factor, the Sig Sauer MPX ASP .177 Caliber Pellet Rifle works and shoots much the same as a real steel Sig Sauer MPX Rifle.
Pros:
Has to be the best semi auto pellet rifle replica I have seen and shot to date.
Near perfect replica of the real steel Sig Sauer MPX including licensing and trademarks.
Awesome build quality, lots of metal parts and the nylon parts are true to form and very solid.
Rifle has been tested to shoot over 15,000 rounds reliably.
30 round full size belt fed magazine has super high capacity and works flawlessly.
Decent fps performance, about what I would expect from a multi-shot CO2pellet shooter and totally usable.
Trigger feels really good, not too long or to heavy and very consistent feel on every shot.
Fully adjustable pop up front and rear sights.
Lots of rails for your pick of sight options and other add on accessories.
Very accurate with it’s 8 inch rifled barrel.
Cons:
Rear stock is none adjustable so the gun may feel kind of cramped for larger shooters.
Internal blowback action does not advance the belt fed magazine but does cock the internal hammer.
FPS claim of 600 fps seems a bit optimistic compared to real world testing.
Comments:
I have been waiting to get my hands on the Sig Sauer MPX ASP .177 Caliber Pellet Rifle for some time now and the wait has been worth it for sure. There are really no other guns out there right now other than perhaps the Umarex CX4 Storm that compare to the Sig Sauer MPX ASP .177 Caliber Pellet Rifle and even so I feel the Sig Sauer MPX is by far the better of the two CO2 Air Rifles. OK so the MPX does not really come close to hitting 600 fps but did you really believe that in the first place? Still consistent 450 fps from a decent grain lead pellet is about what you would expect from a short barreled CO2 rifle. If you do want more fps then look at the MCX with over double the barrel length of the MPX, this will easily get you an additional 100+fps for those of you who thrive on velocity performance. I am fine with 450-500 fps since this is all that is needed to accuracy shoot and nock over most targets at a variety of ranges.
My Vimeo Table Top Review of the Sig Sauer MPX ASP .177 Caliber Pellet Rifle:
