It would not be the end of another year without another Airgun, Airsoft Gun and Blank Gun Collection video for you. This year I'm not showing all my guns, I started to take them out and quickly realized there where just way too many and this years video would have been several hours long and would have taken most of the week for me to shoot and edit...

So this year I have hand picked some of my top favorites and most notable replica Airgun, Airsoft Gun and Blank Guns. They may not all be the best made or hardest shooters or even all that accurate but each one has some significants to me.

So if you have about 30 minutes to kill, then join me in this years roundup of my most favorite Collection of guns for 2012!

Watch my Vimeo Video Airgun, Airsoft Gun and Blank Gun Collection Favorites for 2012

Type: Paintball Pistol.

Manufacturer:RAP4.

Model:RAP4 RAM P99

Materials: Metal & Polymer.

Weight: 2 pounds.

Barrel: 4 inches, metal non-rifled.

Propulsion: 12 gram CO2.

Action: Semi auto, single & double action with blowback.

Ammunition Type: .43 caliber paintball or rubber bullet.

Ammunition Capacity: 9 round magazine.

FPS: 250-300fps.

Trigger Pull: The trigger pull on the Real Action Paintball RAP4 X50 is rather nice in single action, being a true blowback gun, the cycling of the slide not only chambers a round but also pre-cocks the hammer allowing for a very smooth and light single action trigger pull. There is also a working de-cocker that allows you to release the internal hammer. Double action is noticeably heavier but would only really be used on the first shot if you had already used the de-cocker.

Accuracy: After my previous review of the RAM X50 I was expecting this gun to perform pretty much the same. I did find it to be a bit more accurate within the 20-25 foot range using the rubber balls but when I got out into the field and switched over to the Paintballs I found that they where really hooking and darting all over the place? Mind you, this gun was right out of the box and not broken in yet. I also got a bit lower fps (right around 250) out of the RAP4 RAM Walther P99 compared to my RAM X50 but again my review unit had not been adjusted in any way and I imagine I could turn it up a bit to get more fps out of it if I wante to. The plus side is I was able to get an astounding 8 magazines worth of shots out of one CO2.

Build Quality: The RAP4 RAM Walther P99 styled Paintball Pistol is built very well, it does have a polymer frame but the gun overall has lots of metal parts and a very good overall 2 pounds weight to it dry. The blowback action is very snappy and all the mechanics and fit and finish all look and function very nicely. The slide spring is nice and firm giving this paintball gun a snappy recoil and the feel closer to a real gun than that of an airgun.

Realism: The RAP4 RAM Walther P99 was primarily made to simulate real word shooting environments for Police and Military users and even includes Walther branding and licensing, it is a very believable looking and functioning copy of the real steel semi auto pistol it replicates. Other than the exception of the CO2 Cylinder hanging a bit far out of the bottom of the handle. The RAM P99 would be hard to tell from the actual Walther P99, especially when looking down the large .43 caliber barrel. The Blowback action and firm recoil help pull off the believability when shooting this ralistic Paintball Pistol.

Purchase it from:The Replica Airguns Store

Pros:

• Good weight and solid feeling gun.

• Full metal slide with nice heavy blowback recoil.

• All metal heavy 9 round magazines.

• Very Accurate Walther P99 replica including licensing and trademarks.

• Everything works pretty much like the real gun so a great training tool.

• Good accuracy up close and lots of shots per CO2 for such a large round.

• Nice light single action trigger and working de-cocker.

• Fairly affordable.

Cons:

• CO2 cylinder sticks out from the handle and looks a bit odd.

• Paintball accuracy out at range was unpredictable.

• Does not field Strip conventionally.

Comments:

This was my second time testing a RAP4 RAM product and again I took the chance to use it as it was intended to be used - in the field going through simulated tactical situations. My targets where barrels this time but they could have been other people with similar paintball guns shooting back at me which would have put even more pressure on me and forced me to really see where my mistakes are being made. That's the whole point of this type of training airgun, make it as real as it can be without your actual life being in danger so that when you are in danger you will not have to think about what you are doing but simply react based on your previous training. I think anyone who is a gun owner wanting to improve their reactive shooting skills should invest in one of these Paintball guns. One day you may thank yourself but let's hope it does not come to that!

Buy Umarex Pistols in Canada

Buy Umarex Pistols in the US

You may remember my review of the RAP4 RAM X50 (Sig Sauer P226) Blowback Paintball gun? Anyways I have added three models to to the Canada Replica Airguns store. These are really great guns and can be used as training aids because of their excellent realism and of course in paintball wars.

RAP4 RAM X50 Paintball Pistol (Sig Sauer P226)

RAP4 RAM P99 Paintball Pistol (Walther P99)

RAP4 RAM Desert Eagle Paintball Pistol

Right off the bat I have to say I had a great time making this Field Test Video Review of the RAP4 RAM X50 (Sig P226) .43 Caliber Blowback Paintball Pistol. I did something I don't generally do, I went back into my forest area of the property and setup some human sized targets (5 gallon buckets) and did some tactical real world shooting simulation, it was a lot of fun and the RAP4 RAM X50 Paintball Pistol worked perfectly for this as I could very easily see exactly where I was shooting and also did not have to worry too much about rebounding ammo.

This video only covers the shooting performance of the RAP4 RAM X50, so checkout my Table Top Review for things like the Specifications and Features.

In this video I start out by doing a Chronograph Test and shoot not only Paintball rounds but also some Rubber bullet and got very good average FPS results using both ammo types (288 fps using .43 caliber Rubber Balls and 279 fps using .42 caliber Paintballs).

I also tested the accuracy out from 20 feet away in a semi rested position and got about an 8 inch group with a full 9 round magazine, which on a human sized target would do the trick for sure. Keep in mind this is not a target pistol! My Tactical Field or should I say "Forest test", showed that this paintball pistol performs very well when used in a simulated shooting scenario.

I can really see a use for a gun like this, mainly for training oneself on how to acquire targets quickly and how to improve your tactical shooting skills.

Buy RAP4 Paintball Guns in Canada   -   Buy RAP4 Paintball Guns in the US

Type: Paintball Pistol.

Manufacturer:RAP4.

Model:RAP4 RAM X50

Materials: Metal & Polymer.

Weight: 2.2 pounds.

Barrel: 4.63 inches, metal non-rifled.

Propulsion: 12 gram CO2.

Action: Semi auto, single & double action with blowback.

Ammunition Type: .43 caliber paintball or rubber bullet.

Ammunition Capacity: 9 round magazine.

FPS: 250-300fps.

Trigger Pull: The trigger pull on the Real Action Paintball RAP4 X50 is rather nice, being a true blowback action gun, the cycling of the slide not only chambers a round but also pre-cocks the hammer allowing for a very smooth and light trigger pull in single action mode. There is also a de-cocker that allows you to release the hammer without activating the firing pin and placing the hammer in a half cock position rested about 2mm off the firing pin.

Accuracy: I did not expect amazing result with The RAM X50 Paintball Pistol in my preliminary testing as it does use rather light weight and fairly small caliber Paintballs that will be susceptible to wind gusts and the seems on them will make them a bit more turbulent than a standard Pellet, BB or Airsoft round. Even so I was able to hit pretty much any moderate sized target I shot at and I would assume in a battle situation I could place most shots on a human sized target fairly well as along as I was not too panic stricken ;)

Build Quality: The RAP4 RAM X50 Sig Sauer P226 styled Pistol is built very well, it does have a polymer frame but the gun overall has lots of metal parts and a very good overall 2.2 pounds weight to it dry. The blowback action is very snappy and all the mechanics and fit and finish all look and function very nicely. The only function that was not working on my "used" gun was the slide catching on the last round. I have not looked into it too much to see what may be the problem but I can see some wear on the catch area of the slide that may be causing it. I have no idea how the previous owners may have cared for this Paintball gun but overall it is in good condition.

Realism: The RAP4 RAM X50 was primarily made to simulate real word shooting environments for Police and Military users and even though it is not branded and licensed as such, it is a bang on copy of a Sig Sauer P226 Semi Auto Pistol. Other than the exception of the CO2 Cylinder hanging a bit far out of the bottom of the handle, The RAM X50 would be hard to tell from the Real Steel Sig Sauer P226, especially when looking down the large .43 caliber barrel. The Blowback action and firm recoil help pull off the believability when shooting this Paintball Pistol.

Purchase it from:The Replica Airguns Store

Pros:

• Good weight and solid feeling gun.

• Full metal slide with nice heavy blowback recoil.

• All metal heavy 9 round magazines.

• Very Accurate Sig Sauer P226 replica.

• Everything works pretty much like the real gun so a great training tool.

• Fairly affordable in the US adn Canada.

• Seemed to have Decent accuracy, decent amount of shots, about 3-4 good magazines

• Nice light single action trigger.

Cons:

• CO2 cylinder sticks out from the handle and looks a bit odd.

• My slide does not lock back after the last shot, may be a potential wear problem?

• Does not field Strip conventionally.

Comments:

I have had my eye on this paintball pistol for some time now, the first time I saw it, it was behind the counter in a Paintball store and generally in Canada they sell in retail shops for about $450+ so I have kind of been holding off to see if it woudl come my way a bit more affordably. The time came when I was able to leverage another sought after item I had and I was able to add this gun to my collection. I found that it shoots much like many of my other blowback airguns but perhaps with a bit more force than most. Shooting at targets 20-40 feet away was easy and the Paintball's had no problems breaking on contact with most medium to hard objects. I normally would not have a need for Paintball pistol but heck, why not if it looks this good and next time I go out to a paintball battle, I will have a surprise waiting for when I run out of rifle ammo or need to work in some close combat situations...

Buy Paintball Pistols in Canada 

Buy Paintball Pistols in the US

Some more updates for you, I received some more NcSTAR Accessories for my Canada Replica Airguns Store, some Red Dots, Scopes, Lasers, Tactical Lights, Rails, Bipods and some Vests, Slings and Holsters. I will be updating the Canada Store shortly with these very well priced items shortly so check back soon!

I also have a couple more blank guns that I will be conducting a Silent Auction on shortly: An EKOL Lady in Satin and an EKOL Special 99 in "White", which is more like a soft textured Nickel.

Lastly I also just picked up my first paintball pistol a RAM X50 and it is one I have been after for a while since I am a big Sig fan. It' basically an unlicensed Sig Sauer 226 that uses CO2 and chambers .43 caliber paintball and/or rubber balls. It is blowback and has a drop out 9 round metal magazine.

I have been asked so many times to make a "How To Video" on cleaning Airguns and Blank Guns so I thought I better make the video so people stop asking me to make one :) and if they do ask, which I am sure they still will, then I will be able to direct them to this awesome video tutorial...

So basically in this video I clean an Airgun that can be field stripped and I also clean an Airgun that can not easily be field stripped. I then clean a blank gun even thought the process is very much the same.

I also talk a bit about cleaners and general air gun maintenance but for the most part I just show you how to clean the guns so watch the video!

Here it is by popular demend, a video of all my Air and Blank Guns, many of which where added in 2011. Thank you to everyone for your suport, without you all, this would not have been posible!

Here is a list of all my Air and Blank Guns so far...

Pistols BB:

• Umarex PPK/S Nickel platted 4.5mm Blowback CO2 BB Pistol (Full Auto Mod).

• Umarex PPK/S 4.5mm Blowback CO2 BB Pistol.

• Umarex CP99 Compact 4.5mm Blowback CO2 BB Pistol.

• Umarex CP99 Compact Recon 4.5mm Blowback CO2 BB Pistol.

• Umarex H.P.P 4.5mm Blowback CO2 BB Pistol.

• Umarex SA177 4.5mm Blowback CO2 BB Pistol.

• Umarex Steel Storm 4.5mm Blowback CO2 BB Machine Pistol.

• Umarex Makarov 4.5mm CO2 BB Pistol.

• Umarex H&K USP 4.5mm CO2 BB Pistol.

• Umarex Colt Defender CO2 4.5mm BB Pistol.

• Umarex Colt Special Combat CO2 4.5mm BB Pistol.

• Umarex Smith & Wesson M&P 4.5mm CO2 BB Pistol.

• Umarex Beretta Elite II 4.5mm CO2 BB Pistol.

• Baikal IZH MP-654K (Makarov) 4.5mm CO2 BB Pistol (Nickel).

• Cybergun P226 X-Five 4.5mm Blowback CO2 BB Pistol.

• Cybergun P226 X-Five (with Sight Rail) 4.5mm Blowback CO2 BB Pistol.

• Cybergun GSG 92 4.5mm Blowback CO2 BB Pistol (Full Auto Mod).

• Cybergun Tanfoglio Witness 1911 4.5mm Blowback CO2 BB Pistol.

• Cybergun Sig Sauer SP2022 (Metal Slide) 4.5mm CO2 BB Pistol.

• Cybergun Sig Sauer GSR Sigarms 4.5mm CO2 BB Pistol.

• Cybergun IWI Jericho 941 4.5mm CO2 BB Pistol.

• Crosman C41 4.5mm CO2 BB Pistol.

• Crosman PRO77 4.5mm Blowback CO2 BB Pistol.

• EKOL ES 55 4.5mm CO2 BB Pistol.

• ASG CZ 75 P-07 DUTY 4.5mm Blowback CO2 BB Pistol.

• ASG Dan Wesson 2.5 inch Silver 4.5mm CO2 BB Revolver.

• ASG Dan Wesson 4 inch Black 4.5mm CO2 BB Revolver.

• ASG Dan Wesson 6 inch Silver 4.5mm CO2 BB Revolver.

• ASG Dan Wesson 8 inch Black 4.5mm CO2 BB Revolver.

• ASG STI Duty One 1911 4.5mm Blowback CO2 BB Pistol.

• ASG Steyr M9-A1 4.5mm CO2 BB Pistol.

Pistols Pellet: 

• Umarex Desert Eagle .177 Cal. Blowback CO2 Pellet Pistol.

• Umarex Beretta PX4 Storm .177 Cal. Blowback CO2 Pellet/BB Pistol.

• Umarex Beretta PX4 Storm (Tactical) .177 Cal. Blowback CO2 Pellet/BB Pistol.

• Umarex PPQ .177 Pellet & 4.5mm BB CO2 BB Pistol.

• Umarex Colt Government 1911 A1 Nickel CO2 .177 Pellet Pistol.

• Umarex CP88 Matte Black CO2 .177 Cal. Pellet Pistol.

• Umarex Beretta M 92 FS  Matte Black CO2 .177 Cal. Pellet Pistol.

• Umarex Beretta M 92 FS  Nickel Wood Grips CO2 .177 Cal. Pellet Pistol.

• Umarex CPSport CO2 .177 Cal. Pellet Pistol.

• Umarex Smith & Wesson M&P 45 .177 Cal. Pellet 4.5mm CO2 BB Pistol.

• Baikal IZH MP-655K (Viking) .177 Cal. Pellet & 4.5mm BB BB Pistol.

• Crosman 1088 .177 Pellet 4.5mm CO2 BB Pistol (Sliver)

• Crosman 2240 Custom .22 Pellet - Wood Grips - Extended Barrel - RJ Machine Bolt.

• Crosman 1377 American Classic .177 Cal. Pellet - Multi-pump.

• Crosman Kimar CK92 Black CO2 .177 Cal. Pellet Pistol.

• Crosman Kimar CK92 Chrome CO2 .177 Cal. Pellet Pistol.

• Webley Alecto (Zoraki HP-01) .22 Cal. Pellet Target Pistol (Multi-stroke pneumatic)

• Valtro Airgun 92 - Shoot2 System CO2 .177 Pellet pistol.

• Anics Skif A-3000 CO2 .177 Pellet pistol.

• Xisico XSP180 .22 Cal Break Barrel Pellet (Target Pistol)

Pistols Airsoft:

• Crosman Airmag M50 UZI 6mm Blowback CO2 BB Airsoft Pistol (Full Auto Mod).

Rifles BB:

• Crosman Marlin Cowboy Lever Action Spring BB Rifle.

• Daisy Red Ryder Lever Action Spring BB Rifle.

• Baikal MP-661K Blackbird 4.5mm BB CO2/Air Machine Rifle (Full Auto 1200 RPM Mod.) JimC Barrel.

• Baikal Drozd (Classic) 4.5mm BB CO2/Air Machine Gun (Full Auto 1200 RPM Mod.) JimC Barrel.

• Umarex MP5K PDW 4.5mm BB Blowback CO2 Rifle (Semi Auto).

• Umarex Walther SG9000 CO2 4.5mm BB Shotgun (Semi Auto Single & Three Shot Burst).

• Umarex EBOS CO2 4.5mm BB Machine Gun (Semi/Full Auto 8 Round Burst).

• Cybergun Mini UZI 4.5mm BB Blowback CO2 BB Gun (Full Auto Mod).

• RAP4 "Real Action Paintball" RAP5 MP5 4.5mm BB Blowback Rifle CO2(Semi/Full Auto)

• ZMZ Tyrex PPA-K-01 - 4.5mm BB Blowback Submachine gun CO2(Semi/Full Auto)

Rifles Pellet:

• Crosman Quest 800 .22 Cal. Spring Piston Pellet Rifle (Rodent/Crow Removal).

• Crosman Night Stalker .177 Cal. - Blowback CO2 Pellet Rifle (Small Rodent Removal).

• Crosman Backpacker 2289 .22 Cal. Pneumatic Pellet Rifle (Rodent/Crow Removal).

• Baikal IZH MP-61 .177 Cal. Side Lever Spring Piston Pellet - 5 Shot Magazine

• Umarex CX4 Storm .177 Cal. Blowback CO2 Pellet Rifle (Semi Auto).

• Benjamin Sheridan Super Streak in .22 Cal. Spring Pellet Rifle (Rodent/Crow Removal).

• Kimar Mod. K 760 - .177 Cal Spring Pellet Rifle (Target/Small Pests)

Rifles Paintball:

• Tacamo T68 AK47 Paintball Rifle .68 Cal.

Blank Guns:

• Kimar Lady K (Walther PPK) 8mm P.A.K. Blanks - Semi Auto.

• (Removed from Possession) Zoraki Mod.914 9mm P.A.K. Blanks - Semi/Full Auto.

• (Removed from Possession) Zoraki R1 Revolver (Rossi Snub Nosed) 2.5 inch Barrel - 9mm P.A.K. & Crimped 38 cal. Blanks.

• (Removed from Possession) Zoraki Mod.925 Mini Machine Gun 9mm P.A.K. Blanks - Semi/Full Auto.

• Zoraki M906 (All Black) 9mm P.A.K. Blanks - Semi Auto.

• Zoraki M906 (Silver-Chrome Slide) 9mm P.A.K. Blanks - Semi Auto.

• EKOL ASI (UZI) 9mm P.A.K. Blanks - Semi/Full Auto.

• EKOL Jackal Dual (Beretta 92 FS) 9mm P.A.K. Blanks - Semi/Full Auto.

• EKOL Firat (Beretta 92 FS) 9mm P.A.K. Blanks - Semi Auto.

• EKOL Dicle (Beretta Cougar) 9mm P.A.K. Blanks - Semi Auto.

• EKOL Aras (Browning Hi-Power) 9mm P.A.K. Blanks - Semi Auto.

• EKOL Special 99 (Beretta Cheetah) 9mm P.A.K. Blanks - Semi Auto.

• EKOL Major (Walther PPK) 9mm P.A.K. Blanks - Semi Auto.

• EKOL Volga (Tanfoglio GT27) 9mm P.A(Walther PPK).K. Blanks - Semi Auto.

• EKOL Tuna (Tanfoglio GT27)  8mm P.A.K. Blanks - Semi Auto.

• EKOL Arda (Mini Revolver) 8mm P.A.K. Blanks - Semi Auto.

• Retay CS9 (Smith & Wesson CS9) 9mm P.A.K. Blanks - Semi Auto.

• Retay Baron HK (Sig Sauer P228) 9mm P.A.K. Blanks - Semi Auto.

• Retay Eagle (Desert Eagle) 9mm P.A.K. Blanks - Semi Auto.

You can also check them out here.

I have found one of the more confusion aspects of guns is what defines the trigger action, and I confused this a lot at first but now feel I have a good understanding of what makes a gun Single Action Only, Double Action Only or Single and Double Action.

Your best bet is to watch my attached Vimeo video as it not only describes trigger actions but also has the added benefit of the visual examples of each type of trigger action.

Here is a very quick explanation of what constitutes each type of trigger action:

First off the action is based on the role of the trigger in how it effects the action, not how the slide or the hammer can effect the action of the gun.

A Single Action Only gun does one action (a single action) and that is generally the releasing of the hammer or striker or what have you... Single Action Only guns can not fire without first manually pre-cocking the external hammer or manually pulling the slide or charging handle back first to chamber a round and also pre-cock the action of the gun. Keep in mind that the blowback of the slide or bolt in semi and full auto guns effectively cocks the action of the gun allowing for single action trigger release.

A Double Action Only gun performs dual functions, the pre-cocking of the hammer or striker in the first stage and the releasing of the hammer or striker in the second stage, therefore performing two actions. Double Action Only guns do not have the ability to pre-cock the hammer or striker fully and therefore generally have a heavier trigger pull as the first stage of the trigger is to cock the sprung hammer or internal action.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

Single and Double Action guns have the ability to do both, meaning they can be pre-cocked and then fired or fired without pre-cocking simply by pulling the trigger.

Keep in mind that there are some guns that fall in to their own category, take for example the Glock. Glock has been known to actually describer their guns as Double Action Only, when in fact they can not be fired without the slide first being pulled back to partially pre-cock the internal striker - similar to a single action gun. But when you pull the trigger on a Glock you do not simply release the action but rather the trigger first pulls the striker action back the final stage in order to release it, similar to a double action gun.

Again, watch my Vimeo video as I hope the visuals will help you to understand the differences between Single Action Only, Double Action Only and Single and Double Action trigger.

Make sure to also checkout my update video for the RAP4-RAP5 where I compare the RAP5 to my Umarex MP5K PDW and also take out a bunch of cans...

Type: BB machine gun.

Manufacturer: RAP4.

Model: RAP5 (H&K MP5).

Materials: Metal & Polymer.

Weight: 6-7 pounds.

Barrel: 9.5 inches, metal non-rifled.

Propulsion: CO2 or bulk air.

Action: Semi & full auto, single action.

Ammunition Type: .4.5mm steel BB.

Ammunition Capacity: 21 round magazine.

FPS: 400fps.

Trigger Pull: The trigger pull on the Real Action Paintball RAP5 feels kind of like an on/off switch, even though it is not an electronic switch it kind of feels like one a bit and it seems to need some CO2 or Air pressure in order to operate. Once the pressure is there, you can engage the trigger. The trigger is fairly short and nice and light.

Accuracy: I was pretty impressed with the RAP5 BB machine guns overall accuracy. I did not have to play around to much with my Red Dot scope to get it on target and keeping it on target is easy to do in both semi and full auto modes. I was especially impressed with how well it stayed on target in full auto mode. I like the fact that it pumps out BB's very quickly and they go exactly where you want them too go.

Build Quality: I was very impressed with the overall build quality of the RAP5, it has lots of metal parts exactly where they would be metal on the real MP5 giving the RAP4-RAP5 BB machine gun a very solid feel. Even the magazines feel solid and are made with metal. I was bit concerned about how the RAP5 would feed and shoot the BB & casing combination but it really seemed to work well and the combined full auto and ejecting casings makes the RAP5 a total gas to shoot!

Realism: The RAP5 BB machine gun is extremely realistic, you can even mix and match real H&K MP5 accessory parts! The only way you can tell its not the real steel is the small ejection port where the .43 caliber casings fly out, and they really come out with some momentum! Other then that this BB machine gun is very realistic in how it operates, looks and feels.

Purchased From: RAP4 (Real Action Paintball)

Pros:

• Extremely realistic replica of a real H&K MP5.

• Lots of metal on this gun.

• Ejecting casings makes for a realistic experience.

• Semi and full auto selectable with a nice high rate of fire in full auto.

• Can customize with actual MP5 add on parts. (stocks, rails, grips)

• Good accuracy even in full auto mode.

• Can use either CO2 or bulk-air power sources.

• Decent 400fps for a full auto machine gun.

Cons:

• Not a cheap gun!

• Hunting down the ejected casings can be a bit of a chore but they are not expensive to buy.

• .43 caliber ejection port on the side is a bit of a giveaway.

• Would have liked more options of power-sources when purchasing. (Dual 12 gram CO2 adaptor should come standard)

Comments:

When I heard about this BB machine gun, I new I had to have it and mostly because of the way it feeds and ejects the shell casings, much like a real gun! I'm also a big fan of the H&K MP5 styled rifle and PDW version. I was genuinely impressed with everything about this BB shooter; design, quality, realism and shoot-ability and I hope to one day get the RAP4 (M4 styled) version of this gun which uses the same feeding mechanism. If you want the most realistic looking and operating full auto 4.5mm BB machine gun you can get then this is really it.

Buy similar gun in Canada 

Buy similar gun in the US

As promised, I went out and picked up some Reball (reusable) paintballs to try in my Tacamo T68 AK47 styled paintball rifle. I wanted to see what kind of damage they could inflict on various targets. The purpose of the Reball is mainly for practice or training use with paintball guns, they are also used in some indoor paintball facilities. Reballs have the advantage of not only being reusable but also not making a lot of mess.

Another benefit is that Reballs do not break apart and so they will deliver more energy on target which may be useful in a self defense situation with a high fps Paintball gun. Now I am not recommending these guns in any ways to be used for self defense or non-lethal use but other people have suggested it to me, and I wanted to see what these little rubber balls could do to different targets.

Keep in mind I was not looking for penetration as that is not the purpose of a "traumatic round", such as a rubber bullet. Rubber bullets are not supposed to penetrate but rather stun a person.

I found the Rubber Reball Paintballs to be about the same weight as standard paintballs and so they shoot about the same fps which in my gun was about 350 fps.

In conclusion, I would not want to be shot with a Reball out of a high fps paintball gun, as for stopping an intruder, maybe? You most certainly would be able to pick them out of a police lineup because they would be riddled with red welts :)

Buy this Paintball gun in Canada

Type: Paintball air rifle.

Manufacturer: Tacamo (unbranded).

Model: T86 AK47.

Materials: Metal & wood build.

Weight: 8 pounds.

Barrel: 14 inches, non-rifled.

Propulsion: CO2 or compressed air.

Action: Semi auto blowback, single action only.

Ammunition Type: Paintball marker .68 caliber.

Ammunition Capacity: Dependent on hopper system used.

FPS: 350

Trigger Pull: The trigger pull on the Tacamo T68 AK-47 is what you would expect from a blowback operated single action gun, easy and light with just a bit of creep to it. The action of the bolt gives the gun a nice little snap to it and with the extra CO2 needed to push out the large .68 caliber paintball markers you also get a little bit of recoil adding to the shooting enjoyment.

Accuracy: I'm not going to spend a lot of time talking about accuracy with the Tacamo T68 Paintball gun as I don't really have any other references to base it on but I can say I was pretty impressed with how well it stayed on target considering most paintball ammo is not really uniform in shape which effects accuracy a lot. I was also expecting lower FPS performance closer to the 250-300 FPS range but I got nice consistent 350 FPS shots with the Tacamo T68 AK47.

Build Quality: Very nice, the  Tacamo T68 AK-47 is made of mostly metal and wood with many actual parts from a real AK 47 including the wood handle and stock, rear sight, safety, magazine and authentic strap. The Tacamo Paintball rifle has some weight to it also making the AK 47 replica feel solid and durable.

Realism: Again the Tacamo AK 47 replica is made of lots of real AK47 parts making this gun very realistic, you can't really get around the telltale Paintball marker top loading tube and CO2 hookups but other then that the Tacamo AK47 really looks like a an actual AK47, so if you want to play the bad guy you can definitely pull it off with this replica paintball rifle.

Available From: The Replica Airguns Store

Pros:

• Very believable AK 47 replica.
• Lots of real AK-47 parts
• Mostly metal and wood design.
• Magazine can be used for storage of tools or extra paintballs
• Adjustable sights
• 3 models to choose from with different styled stocks.
• Comes with genuine strap.
• Fun to play the bad guy with this villainous rifle.

Cons:

• Semi auto only, no full auto - would have been nice!
• May be a bit large and heavy compared to other more compact Paintball guns.
• A few paintballs broke in my barrel when shooting, FPS pressure may have been set too high?

Comments:

I really like my Tacamo T68 AK47 Paintball rifle, again I have virtually no experience with Paintball guns so my reasons for liking it are mostly based on the all metal and wood build and real AK 47 look of the Tacamo T68 AK47. That said I thought it performed pretty good overall getting decent accuracy and shooting well into the 300+ FPS. I may pull this one out once in a while even to shot some various targets just because it does have a more realistic recoil feel when shooting then my smaller caliber pellet and BB airguns.

Buy Paintball guns in Canada

Buy Paintball guns in the US

You just have to have the classic AK47 and this one even has the wood foreword stock. I will be reviewing the Under Folding Stock version of this very realistic looking AK47 Paintable Assault rifle.

The Tacamo T68 AK47 Series of Paintball guns are based on the most widely used assault rifle in the world - the AK-47! Tacamo has taken the AK47's classic lines and melded them with the powerhouse T68 internals to create this powerful marker for scenario paintball and military training. The Tacamo marker is designed as the "opposing force” weapon to enhance military combat training, or for when you just want to play a bad guy for the weekend.

The Tacamo T68 Series Paintball Guns are manufactured at a registered weapons factory in the PRC using actual production parts from AK47's where possible!

This Paintball gun is made but Tacamo but does not carry the Tacamo Brand.

• .68 caliber Paintballs
• Adjustable 200-400 FPS
• AK Magazine
• Authentic Metallic Sights
• Realistic Size, Weight
• 14 inch barrel
• Semi auto
• Hopper fed
• Reliable T68 Internal with All-Mechanical Performance—no batteries!
• Accepts CO2 or HPA
• All metal and wood construction
• Comes with authentic sling

Buy Paintball guns in Canada

Buy Paintball guns in the US

I'm trying something new here by adding a few Paintball guns to the store and I do plan on reviewing one of the Tacamo Paintball guns, this will be a new experience for me for sure!

The Tacamo AK RPK Special Products Division-RPK is a real show stopper. The stock and fore-grip are real laminated wood, it comes with a real AK bi-pod, real AK rear sights, and a specially bored 20 inch barrel. The Tacamo AK RPK Special Products Division-RPK also comes with a 75 round drum magazine for that added realistic look.

This Paintball gun is made but Tacamo but does not carry the Tacamo Brand.

• .68 caliber Paintballs
• Adjustable 200-400 FPS
• Semi auto
• Hopper fed
• Realistic Size, Weight
• Reliable T68 Internal with All-Mechanical Performance—no batteries!
• Accepts CO2 or HPA
• All metal and wood construction

Buy this Paintball gun in Canada

Related Posts:

• FULL METAL UZI BLOWBACK CO2 .177 BB GUN ON ITS WAY

• CYBERGUN MINI UZI BB GUN REVIEW

• CYBERGUN MINI UZI CO2 BB GUN CHRONOGRAPH AND FULL AUTO SHOOTING TEST

"Before you attempt to do this modification you need to be aware that it may void your warrantee and/or you may fail and either break something or incorrectly reassemble your Mini UZI rendering it "Broked"! This is your problem so please do not attempt this modification (even though it is fairly easy to do) unless you're 100% confident you can do it and are aware of the possible consequences. Make sure to also take into account any gun laws in your area prohibiting full-auto capable firearms!"

(Special thanks to Herman for showing me the ropes on this modification)

This modification will make your semi-auto "only" Cybergun/KWC Mini UZI BB Gun into a full auto capable 4.5mm BB machine gun. From the factory the full auto switch position (Far Left "A") is disabled but the full auto selector position is visible. The actual full-auto functionality is still present in the Mini UZI but has been decommissioned by the simple means of blocking the selector switch from being moved to the far left full-auto or "A" position.

This full auto modification will show you how to disassemble the Cybergun - KWC Mini UZI BB Gun and remove the small plastic selector switch blockage so you will be able to manually switch between semi auto and full auto modes. This modification takes about 15 minutes to complete.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

You will need the following tools: A pair of pliers and either a pair of small wire cutters or a file.

Let's begin! Below are the two pre-modification positions available from the factory:

"S - SAFE"

"R - SEMI AUTO"

Below is a closeup of the top bolt cover that we will be removing to access the internal bolt for removal:

In the next photo we have removed the bolt cover by pressing the "angled button" towards the rear sight:

And now the bolt is removed:

I removed the grips but this is not necessary:

Now you will need to remove the lower receiver pin located at the back end of the receiver closest to the grip safety. Use a pair of pliers to pinch the metal pin while pushing it through. Once the pin is started you can use the pliers on the other side to pull the pin all the way out. You may need to us a fair amount of force to do this as the fit of the pin is tight:

Once the pin is removed the lower receiver can be detached:

You can see in the picture below the small plastic nub that we will need to remove in order to restore full-auto capability:

I used a pair of small wire cutters to clip this plastic nub off, but you could use a file too. Just make sure that the plastic is flush and does not have any burs or protrusions.

Below is a photo of the Plastic Nub removed from another angle:

After that, all you need to do is reassemble you Mini UZI in revers order to finnish the Full Auto modification.

In the below Photos you can see we have restored the ability to move the fire selector switch over to the "Far Left" or "A" position, reenabling the Cybergun - KWC Mini UZI BB Gun to shoot in full auto when desired.

"A - FULL AUTO"

Now enjoy your Cybergun - KWC Mini UZI BB Gun in full-auto as it was originally designed!

Here is my Vimeo Video in Narrative with Photos:

Buy this gun in Canada

Buy this gun in the US

This Article was graciously provided by one of my viewers: Lee

Related Posts:

• SIG SAUER X-FIVE STAINLESS STEEL VERSION

DISCLAIMER, PLEASE READ AND UNDERSTAND!

• This walkthrough is for information purposes ONLY, if you decide to dismantle your BB gun you will void any warranty you have with the manufacturer.
•  I will not be held accountable for your actions or any damage that is caused by your negligence. Therefore, if YOU decide to dismantle your BB gun and break something during the dismantling or assembling it is your problem not mine.
• If you don’t feel confident or comfortable doing any of these steps STOP and do not proceed any further or you may do damage.
• YOU WILL LOOSE ALL THE SIG SAUER MARKINGS ON THE GUN.

Having said all that, this is my first ever instructional so I’m going to try and make this walkthrough as easy as I can for you to understand. You will need the following: Flat tip Screwdriver for the grips, Small Philips Head screwdriver, small punch & needle nose pliers – the last 2 are optional.

Make sure you have a clean work space and lay out every part in the order that you remove it Left to Right, come reassembly time you work Right to Left it makes reassembly so much easier.

Step 1:

Field Strip the slide until it looks like this:

Unscrew these 2 screws, these hold in the “Breech Block” once your unscrewed cup the end of the slide in your hand and let the Breech & Screws fall in your hand – Set these aside.

That’s it your Slide should look like this:

It is now ready for paint removal.

Step 2:

Take the Frame and start removing the grips Left hand side first:

Flip the frame over and remove the right hand side grips:

Carefully remove the trigger return spring, it is under tension and it WILL fly across the room – I spent an hour looking for it one day! Also while we are at it, you can remove the cover to the magazine release.

To remove the safety, place your flat tip screwdriver between the frame and the safety and twist ever so gently this will separate the safety and all you need to do now is grab the safety from either side and gently pull & wiggle until it separates.

Once the safety is removed you will see the safety bar, this lifts off.

Step 3:

Lift this little pin out and remove the spring, very carefully push this pin from the other side and remove, be careful because once this happens your hammer assembly is loose and free from the frame.

Slowly and gently remove the hammer assembly:

Note the little shiny piece that sits on the side of the hammer assembly, try very hard not to let this piece fly out, it is a pain to get back in, if it does fly out keep calm and take your time, don’t force the little spring in, it seats in behind the shiny metal thing – sorry I don’t have a proper name for it.

Also make sure that the spring next to it is in the locked open position, if it snaps back just get the tip of a small screwdriver and slide it to the left until it locks.

The hammer return spring assembly at the back of the grips can be removed and set aside.

Removing the trigger assembly is easier than it looks; you need to remove the takedown lever by rotating it counter clockwise until it stops.

Push it through the frame and rotate it back clockwise to remove it all together.

Remove the screw holding the trigger assembly:

Lift out the trigger assembly; be careful of the slide lock spring it wont Fly out, but it will fall out.

If you want to remove the magazine release, there is a spring that sits at the rear of the trigger guard;

Push the magazine release in part way & with the flat tip screwdriver lifts the up to remove it, once removed the magazine release will simply fall out.

THAT’S IT! We’re done, ready for the paint removal. Any paint stripper is fine.

KEEP IT WELL AWAY FROM THE PLASTIC PARTS!

Follow the manufacturer’s guidelines for use of their product and thoroughly clean the slide and frame after you have removed the paint.

YOU WILL LOOSE ALL THE SIG Sauer MARKINGS ON THE GUN.

Rub over the slide and frame with #0000 Steel wool or 1200 grit Wet & Dry paper. Clean again and using the paper or steel wool with some ALUMINUM polishing compound like Autosol and some good ol fashioned elbow grease polish the slide and frame until you reach your desired outcome. Clean it all down again and wipe it down with a rag that has had gun oil or my preference “Fluid Film”.

Reassemble the gun in the reverse order and viola one shiny SIG Sauer X-Five.

Buy this gun in Canada   -   Buy this gun in the US