Trigger Pull: The single action only trigger pull on the Umarex DSX 45 Spring BB Pistol is actually pretty decent. I would say it has a short to medium length with only a little bit of light take up and then an easy release that has no additional friction. You will have to cock the slide back for each shot which also cocks the hammer back allowing for a true single action trigger. The trigger its self is not like a traditional 1911 trigger in terms of looks but it does work well.
Accuracy: I have briefly shot the Umarex DSX 45 Spring BB Pistol so I could make some initial comments about its performance as it is a very new product to me. I will be making a full Field Test Shooting Video down the road but for now I can say it performed a lot better than I was expecting. The claimed 240 fps seems believable to me as shots at 20 feet hit the target with very little delay and even at 30 feet the delay was acceptable. In terms of accuracy, out of the box, for the most part hit the target at both 20 adn 30 feet very close to where I was aiming which is what you are hopping for.
Build Quality: Build quality for the Umarex DSX 45 Spring BB Pistol is also better than I would expect from a $29 Canadian almost all plastic BB Pistol. Everything felt nice and tight and fit and finish was good in general. There is even some metal where they could have gone with cheaper plastic, for example it has a metal trigger and slide catch release that is actually the safety. Of course the barrel and some other internal parts are going to be metal along with screws and such.
Realism: The Umarex DSX 45 Spring BB Pistol is a fairly believable replica of a more modern 1911 45 caliber semi auto pistol. Other than it being mostly plastic and much lower in weight, at around 1.25 pounds, the Umarex DSX 45 Spring BB Pistol does look the part with a working slide (for cocking the spring), a full size drop out magazines, a recessed barrel and a lot of detail in the finishing of it. I find it to be a little bit wider than a real 1911 would be in the grips and even the main frame and slide by just a bit.
Pros:
Super low coast to buy and shoot, no CO2 required, just need 4.5mm Steel BB’s and away you go.
Shoots pretty good, BB’s got to the target a lot faster than I was expecting them to and they shot where I was aiming in general.
Decent looking Replica of a modern 1911 Semi Auto Pistol.
Has a picatinny rail for adding accessories if you want to.
Single Action Trigger is pretty decent, a bit of take up but medium light weight to it.
Has a close to full size magazine that looks the part.
Magazine has a 200 round hopper capacity with 13 rounds being loaded into the feeder at a time.
Safety is worked into the slide catch release which adds to the realism in terms of looks.
Recessed barrel for added realism.
Actual working hammer you can de-cock if you want to for a bit of added safety.
Cons:
Almost all plastic other than some internal metal parts like the barrel and spring and some other stuff I am sure.
Takes a bit of effort to cock it which is required for each shot.
Sights are not adjustable and are all black with no white dots.
A bit beefy for smaller handed shooters.
Comments:
The Umarex DSX 45 Spring BB Pistol is a super inexpensive BB Pistol but don’t let that stop you from considering it to add to your collection. It has a lot going for it in my opinion. First off the price is super low to buy and to shoot, you only need a bunch of BB’s and you can shoot all day for a couple of bucks. It looks pretty believable as a 1911 Replica. The build quality and detail is a lot better than you should get for only $30 dollars here in Canada and when I quickly tried it out, it actually shot pretty hard for a spring BB Pistol and it seemed to hit the target right where I aimed even at 30 feet away. It even has a full size magazine that holds 200 rounds with a quick load 13 round spring feeding system to keep the fun going. Kind of a no brainer if you’re looking for a cheap and fun time.
In this shooting velocity and accuracy Field Test Video of the Cybergun Thompson 1911 CO2 NBB Pellet Pistol, I “try to” test out what the velocity in fps using a standard 12 gram CO2 along with 7 grain .177 caliber lead pellets shooting 5 rounds through my Chronograph. The claimed fps for this pellet shooter is 332, not sure if that is with lead or alloy pellets? I then setup a fresh paper target 30 feet down range here in the Sea Can and shoot 6 rounds into it using a semi rested shooting position to find out if the Cybergun Thompson 1911 CO2 NBB Pellet Pistol can get all 6 rounds out the barrel and if it can place them any where near the bullseye out of the box. And if it can also get a decently tight grouping. If you have not already watched my Table Top Video Review for the Cybergun Thompson 1911 CO2 NBB Pellet Pistol, then make sure to check that one out for details, specifications and some nice close up 4k video. It is a pretty sweet looking Airgun!
First, my velocity test of the Cybergun Thompson 1911 CO2 NBB Pellet Pistol, I “try to shoot” 6 rounds through my Chronograph and then averaged them all out as I do in all my Field Test Shooting Videos. I did not have a lot of success with my first choice of pellets and pretty much got a jam right away. I then switched up the pellets and I was able to get 5 out of the 6 rounds in the one side of the rotary mag through my Chronograph and here where the results… The slowest shot was 206 fps while the fastest shot hit 251 fps, this averaged 231 fps which was kind of far off of the claimed 332 fps. Maybe the claim is for light weight alloy pellets? I don’t know? To be honest I was just glad to get a result as I was not having a lot of luck with the rotary magazine working for me all that well.
I then tried my luck again and placed a fresh paper target 30 feet downrange and using a semi rested shooting position (hands rested on a sandbag up front and sitting on a stool in the back). Luck was on my side as a succeeded to place all 6 rounds into the target with no jams this time! The Cybergun Thompson 1911 CO2 NBB Pellet Pistol did alright in terms of accuracy placing 4 shots all within about an inch and a half well centered just a bit high of the bullseye. Two shots did drop down as they seemed to come out underpowered compared to the other 4 shots which does explain why they dropped a bit on the target. This did stretch out the grouping to closer to around 4.5 inches.
Rotary pellet magazines are for sure never as consistent as vertical stick type magazines shooting round BB’s. There is always going to be some jamming that happens especially if the pellets you pick do not fit perfectly. Once I found a pellet the Cybergun Thompson 1911 CO2 NBB Pellet Pistol liked a bit more, I did have better success with only the occasional jam. Power was not great as you saw with my velocity test. Accuracy was for sure much better and if the velocity was more consistent then I am positive 1.5 to 2 inch groupings would be possible! The trigger is OK but loaded up with pellets does tend to drag a bit more than when empty and make you work a bit harder with that trigger finger, but it does get the job done. The best part about the Cybergun Thompson 1911 CO2 NBB Pellet Pistol would be its looks and how it feels in the hand for sure, the stainless finishes gives it a quality look so if looks are more important than performance and you want a sweet looking stainless 1911, this may be your pick.
Type: Non-blowback CO2 Pellet Pistol. Manufacturer: Distributed by Cybergun. Model:Thompson 1911 Materials: Metal and plastic. Weight: 2.18 pounds (990 grams). Total Length: 8.66 inches (220mm). Barrel: 4.75 inches (121mm) metal rifled. Propulsion: CO2 x 1. Action: Semi auto non-blowback, DOA trigger. Ammunition Type: .177 caliber pellets. Ammunition Capacity: 12 (6x2) round drop out metal magazine. FPS: Claimed 332.
Trigger Pull: The Cybergun Thompson 1911 CO2 NBB Pellet Pistol is typical of a double action trigger in that it is a longer trigger pull that requires more effort to pull than a single action trigger would. The Cybergun Thompson 1911 CO2 NBB Pellet Pistol trigger is good for a DOA trigger as it is not overly heavy and does allow for somewhat quick follow up shooting. The trigger pull not only cocks the hammer, it also rotates the rotary magazine on either end of the stick magazine so there is a lot going on here but it still is not overly heavy which is nice.
Accuracy: I have yet to shoot the Cybergun Thompson 1911 CO2 NBB Pellet Pistol or performed my standard Field Test shooting Video so I can not comment at this time on the performance other than what is claimed in terms of fps (332). In terms of accuracy I am hoping it will perform well being not only a pellet pistol but since it also has a rifled steel barrel this may help with accuracy. We will find out shortly when I make my Field Test Shooting video of this CO2 Pellet Pistol.
Build Quality: The Cybergun Thompson 1911 CO2 NBB Pellet Pistol has a mix of metal and plastic parts with the slide and magazine being the main metal parts and the frame along with most of the controls like the trigger, slide catch release, hammer and safety all being made out of plastic. Of course many of the internal parts like the barrel will be metal or even steel. Overall the Cybergun Thompson 1911 CO2 NBB Pellet Pistol feels solid and has a good weight up and over 2 pounds. Fit and finishes are also good but I would have liked to have seen the trigger, hammer, slide catch and safety being made out metal, as it just would have felt better to the touch. Yes I can feel the difference!
Realism: The Cybergun Thompson 1911 CO2 NBB Pellet Pistol looks pretty much bang on to a Colt 1911, really the big tell would be the trigger as it is much larger than a standard 1911 to accommodate the double action trigger pull length but other than that, this CO2 Pellet Replica Pistol does a good job of replicating the real steel version. It is even similar in weight and feel. The recessed barrel, full size drop out magazine, and I think the detail of the stainless finish on the slide all add to the realism.
Pros:
Double action trigger is not that bad, fairly light and smooth.
Fit and finish looks good, just wish the trigger, hammer and safety where also metal.
This pistol has a good weight at a little over 2 pounds!
Decently looking replica of the real steel colt 45 1911.
Has a rifled metal barrel which may help with accuracy..
White dot sights front and back helps with quick targets acquisition.
I like the stainless steel slide, it gives the gun a quality look.
Recessed barrel for added realism.
Full size metal magazine holds the CO2 and Pellets and adds additional weight.
Thompson Licensing looks good on this gun, not too much.
Cons:
Trigger, hammer and safety should have been made out of metal.
Hammer is non functioning.
No blowback and no sight adjustments.
Comments:
The best feature of the Cybergun Thompson 1911 CO2 NBB Pellet Pistol is the stainless steel slide finish which really gives it a quality look and makes it even more believable. What takes away from the believability are the plastic parts and the lack of blowback operation or even a working slide. That said the Cybergun Thompson 1911 CO2 NBB Pellet Pistol offers a rifled steel barrel combined with shooting pellets which should make this a more accurate option over perhaps a Blowback CO2 BB 1911. I will have to test this out shortly to know for sure but if accuracy is more important than realism, than the Cybergun Thompson 1911 CO2 NBB Pellet Pistol may be your better option.
I’ve got some new Airguns to show everyone today and all of them are Pistols of some sort or another. I show you three 4.5mm BB Pistols from ASG, a Cybergun 1911 NBB BB Pistol, an Airsoft Full Blowback Pistol from EMG and lastly from Umarex, an HK Full Blowback Airsoft Pistol. This is not a full review by any means, the video is mainly to let you know what is coming up in terms of Table Top and Field Test Videos and that we do have these products at least listed in our Replica Airgun Store.
Type: BB PistolPellet Pistol. Manufacturer: Distributed by Crosman. Model: SNR357. Materials: Mostly metal, some plastic parts. Weight: 1.92 pound (871 grams). Total Length: 8.13 inches (20.65cm). Barrel: 3 inches (7.6cm) metal non-rifled. Propulsion: CO2. Action: Revolver single and double action. AmmunitionType: 4.5mm BB’s / .177 cal. pellets. AmmunitionCapacity: 6 round cylinder. FPS: Claimed 400.
Trigger Pull: The Crosman SNR357 CO2 Dual Ammo Revolver has both a single and double action trigger, meaning you can pre-cock the hammer and shoot in single action which has a light short trigger pull. Or you can simply shoot in double action by pulling the trigger when the hammer is down and the trigger will cock the hammer and also release it to fire the Revolver. In double action the trigger is noticeably longer and heavier than in single action as your trigger finger now has to do all the work for the action. Having both single and double action is nice as you can shoot in action rapid fire using the double action or slow down and shoot with more accuracy in single action.
Accuracy: I have not tested out this exact Crosman SNR357 CO2 Dual Ammo Revolver but I have reviewed several similar products from Dan Wesson which essentially are the exact same mechanical gun manufactured by Wingun for both ASG and Crosman. I will be making a new Field Test Video for the Crosman SNR357 in a week or two but you can take a look at my recent Field Test Video for the Dan Wesson 2.5 inch Gold version which is mechanically the same gun as the Crosman SNR357 CO2 Dual Ammo Revolver.
Build Quality: When it comes to the build of the Crosman SNR357 CO2 Dual Ammo Revolver, it is alsmot all metal other than mainly the grips and the CO2 tab as far as I can tell. It weighs in at nearly 2 pounds even for a more compact revolver so it feels very hefty in the hand. In similar Dan Wesson models there has been some concerns with the hammer feeling a bit sloppy but this has never caused any concern in terms of functionality. I also am not a fan of the way the grips slide back for access to the CO2 as they can come off and misalign when trying to put them back in place. Other than that this pistol is a solid well made revolver.
Realism: The Crosman SNR357 CO2 Dual Ammo Revolver is styled after a 357 type snub nosed revolver and looks for the most part true to scale and form. As this product design was one of the first shell loading revolvers back in the day, manufacturers had to use parts that where already available as in the CO2 valves which where at the time a bit longer than they can make now. Because of this, the area between the cylinder and the back the revolver is a bit long to accommodate the longer valves made at that time. This does distorts the gun a little bit but to be honest most people will not notice.
Pros:
Design has been around for a while now and so it is well tested.
A decent looking replica of a 357 type revolver.
Single and double action trigger allows for both action and more laid back and precise shooting ability.
400 claimed fps is more than adequate for plinking and action shooting.
Always fun loading up the 6 removable shells and placing them in the cylinder.
Fully adjustable sights for dead center shooting.
CO2 is fully well hidden inside the grips.
Can choose between shooting pellets or BB’s.
Cons:
Barrel is not recessed.
Area between cylinder and hammer is a bit long as it has to accommodate the CO2 valve.
Grip removal can be a bit finicky.
Comments: The Crosman SNR357 CO2 Dual Ammo Revolver is far from a new styled gun on the market, it’s been around for about a decade originally introduced main stream by ASG as their Dan Wesson 357. Being an older styled airgun means any issues it may have had are now for sure worked out so you know you are getting a solid and reliable Air Pistol here. If you are looking for an updated 357 then take a look at the Dan Wesson 715 series as some of the issues I have mentioned with the SNR357 are worked out on the newer style 357 Revolvers.
I have already reviewed several Crosman 357 Pellet/BB Revolvers in the past like the Crosman Vigilante which also has the ability to shoot both .177 caliber pellets and 4.5mm Steel BB’s, (Really they all are with the right magazine). With the Vigilante my pellet chronograph tests got similar results but with Steel BB’s the Crosman Vigilante did a lot better than my Crosman Triple Threat CO2 Dual Ammo Revolver using a similar 6 inch barrel. As expected both the Crosman Vigilante and the Crosman Triple Threat did about the same in terms of accuracy getting better results with pellets over Steel BB’s.
Starting with the velocity portion of my Indoor Field Test Shooting video, I placed a brand new 12 gram CO2 into the Crosman Triple Threat CO2 Dual Ammo Revolver and tested out some 7 grain .177 caliber Lead Pellets. I averaged 382 fps in what I would consider normal indoor temperature ranges so you can expect a bit higher velocities in warmer conditions. Moving on to 4.5mm 5.1 grain Steel BB’s, I averaged quite a bit lower velocity at 288 fps. I was surprise since it was almost 100 fps lower than the heavier 7 grain lead pellets. The logical reason for this is that lead Pellets fit the barrel much more snug, stoping any CO2 from getting around them which helps increase the velocity over Steel BB’s which are a hard metal and need to be slightly smaller in diameter and therefore do let some CO2 get by reducing the pressure behind them.
For the accuracy porting of the the Indoor Field Test I shot 10 rounds for my pellet magazine first and then 6 rounds for the BB magazine, simply because this is how many rounds each magazine holds… Makes sense right? Even with the pellet magazine holding 10 rounds over the BB magazine’s 6 rounds, the Pellet magazine was still able to get a much tighter grouping at around 1 inch over the BB target which was closer to 3 inches. BB’s seemed to really like to hook a bit with the Crosman Triple Threat CO2 Dual Ammo Revolver, so I would for sure go with pellets if accuracy is importatn to you. Both pellets and BB’s shot a little bit high and to the left from the bulls-eye but that can easily be adjusted with the fully adjustable rear sight.
The Crosman Triple Threat performed rather as expected and was not a big surprise other than the BB’s really having a much lower velocity this time around. It is clear to me that I would not waste my time shooting Steel BB’s unless this is all I had on hand as they where not only much slower but also a lot less accurate. Over time the steel BB’s could damage the rifled steel barrel effecting future pellet accuracy. The Crosman Triple Threat CO2 Dual Ammo Revolver offers a lot of options with ammo choice and barrel choice that alter it’s looks and even performance to some degree but if you want a Crosman 357 type CO2 Revolver than it for sure gives you the most flexibility.
Trigger Pull: The trigger pull on the Crosman Triple Threat CO2 Dual Ammo Revolver like pretty much all of the 357 type Crosman Revolvers is rather nice in single action with virtually zero take-up and it has a not too light weight with a predictable feel to it. In double action it does get much longer and heavier but still very usable. If you have larger thicker finger then you may want to start off in single action as the finger opening is a bit tight.
Accuracy: I have not specifically tested out the Crosman Triple Threat so far but I would be very surprised if it was any different than the standard Crosman 357 and the Crosman Vigilante I have already done Field Test Reviews for. Other than the shape of the outer barrel, both of these guns are virtually the same including the frame and the 6 inch barrels. Back in 2012 when I tested out the Crosman 357 I averaged around 400 fps using mid grain lead pellets and was able to get a 1 to 1.5 inch multi-shot grouping at 30 feet away from my paper target. I will be making an update Field Test Shooting Video so we will see if I can replicate these results with the standard Crosman 357 and Vigilante CO2 Pellet and BB Revolver.
Build Quality: The CCrosman Triple Threat CO2 Dual Ammo Revolver is a fairly basic pistol that incorporates a variety of length plastic outer barrels and inner steel barrels (3/6/8 inches), the grips are also plastic as expected and so are the magazines and sights. Most everything else is metal including the receiver, trigger and hammer. This line of Crosman 357 pistols has been around for decades so you can expect hours of fun and reliable shooting with their multi-barrel dual ammo version.
Realism: There are for sure a lot more realistic looking Replica Revolvers out there with swing out cylinders that eject the shells just like their real steel counterparts, but where the Crosman Triple Threat shines is in performance, reliability and consistency. You will get more shots per CO2, higher fps and better accuracy with the Crosman Triple Threat CO2 Pellet and BB Revolver over other more realistic Revolvers on the market.
Pros:
Inexpensive Pellet revolver with a proven track record that goes back decades.
Good usage of metal parts where you need them most. (Metal trigger, hammer, frame, barrel, CO2 Tab screw
Single and double action trigger for action and more focused shooting.
Excellent accuracy and good power with a reasonable amount of shots per CO2 (based on similar versions).
Fully adjustable rear sight.
Riffled steel barrels (All three of them).
3 different barrel choices (3/6/8 inches) depending on the look and how compact you want it to be.
CO2 and tab are nicely hidden and use all metal.
Come with both a Pellet and BB magazines..
Cons:
Outer barrels are plastic but very solid. Metal would have added a bit more weigth perhaps better balance?
Grips and trigger pull length may be a bit long for smaller handed people when shooting in double action.
Not your most real revolver out there in terms of replicas out there but probably more usable then most.
No white dots on the sights.
Comments: The Crosman Triple Threat CO2 Dual Ammo Revolver is basically another reskinned Crosman 357 at the end of the day with a ton of options including 3 different barrel lengths that will change the look, size and power depending on your needs. You also have the choice of what ammo you want to use, cheaper 4.5mm Steel BB’s or more accurate and even higher velocity lead pellets for greater downrange energy and precision. If you are not sure which Crosman 357 type revolver to get? The standard 357… the Vigilante or the Triple Threat, maybe go with the Triple Threat at the end of today as it offers the most options and variety of configurations.
Type: GBB Airsoft Pistol. Manufacturer: Made by EMG. Model: TTI JW4 2011 Pit Viper. Materials: Aluminum & polymer components. Weight: 2.26 pounds (1025 grams). Length: 8.5 inches (2167mm). Propulsion: CO2/Green gas. Action: Semi auto blowback, single action only trigger. AmmunitionType: 6mm plastic Airsoft BB's. AmmunitionCapacity: 28-30 round drop out full size metal magazine. FPS: Claimed 370-390.
Trigger Pull: The single action only trigger pull on the EMG TTI Pit Viper JW4 2011 GBB CO2 Airsoft Pistol is really great, there is virtually zero take-up with a light, crisp and easy release. You can double tap with ease making the EMG TTI STI 2011 Combat Master a great action pistol. One of the shortest and smoothest 1911 triggers I have tested, similar to the EMG TTI JW3 Combat Master.
Accuracy: At this point I have not shot the EMG TTI Pit Viper JW4 2011 GBB CO2 Airsoft Pistol so I have no idea what the actual real world fps is going to be and how accurate it proves itself so my comments for this part of the review will have to wait till I perform my Field Test Shooting Video coming up shortly. I do however expect it to perform very close to the EMG TTI STI 2011 Combat Master I already made a Field test Video Review for so you can check that on out in the mean time…
BuildQuality: The EMG TTI Pit Viper JW4 2011 GBB CO2 Airsoft Pistol is for the most part an all metal gun with a CNC Machined Aluminum Slide and aluminum barrel along with mostly metal parts throughout including much of the frame. Parts of the frame are polymer including the grip area and trigger guard. The fit and finish is awesome on the EMG TTI Pit Viper JW4 2011 GBB CO2 Airsoft Pistol with attention to detail everywhere.
Realism: The EMG TTI Pit Viper JW4 2011 GBB CO2 Airsoft Pistol is based off of the Pit Viper TTI, a replica of the John Wick pistol used in the John Wick 4 movie and is virtually the spitting image to it. You will find licensing and trademarks where you would find them on the real steel version. Of course all the mechanical parts work like the real version and the EMG TTI STI 2011 Combat Master can be fully field stripped allowing for quick and easy hop-up adjustments.
Pros:
Super crisp, light and short SAO trigger.
Fit and finish is excellent, very little slide wiggle.
extremely close replica of the Pit Viper 2011 pistol used in the John Wick 4 movie.
Rear sight is fully adjustable and sits very flush with the slide.
Fiber optic front sight helps with quick targets acquisition.
CNC machined Aluminum slide and barrel with polymer frame.
Flared magwell for easy quick magazine reloading.
Full size high capacity 30 round double stack metal magazine.
Ambidextrous thumb safeties.
Working grip safety as you would expect on a 1911 based gun.
Most Mechanical parts work just like a steel version and can be easily field stripped to access hop-up.
Nice snappy and fast blowback action, great for action shooting.
Licensing all over this gun true to the real steel version.
Cons:
Comes with the red tip but can be remove pretty easily.
Getting magazine but plate off is a bit tuff.
No white dot’s or fiber optics in the rear sight.
Comments:
The EMG TTI Pit Viper JW4 2011 GBB CO2 Airsoft Pistol is another great Replica of a John Wick pistol and has a less squared and smaller stature than the EMG Combat Master and a smoother overall look to it. What’s nice is that the magazines are interchangeable between the EMG TTI JW3 and JW4 versions so if you already have one then you will get additional magazine options, perhaps one in Green Gas and one in CO2. I like the slightly bulkier feel to the Combat Master but the Pit Viper is also a decent size, but again slightly more compact and less edges to get caught on your surroundings. Either way, both are awesome options if you are John Wick fan.
I love making these Mystery Box Unboxing Videos as many of the items inside are actually real mysteries to me, some I may have an idea of but even these items are new to me so it’s fun to open them up and check them all out. In this October 2023 Mystery Box Video I checkout 9 items ranging from AEG Airsoft Rifles to Airsoft , BB and Pellet Pistols. There is even a new Steel BB product from Sig Sauer that is a compact rifle with a 3 round burst option when shooting.
This is not exclusive to Airguns since trends of Airguns are highly influenced by what type of Real Steel Pistols are popular to people. This is often based on what people see portrayed in movies and TV Series, and also promoted online. There is for sure an overlap in what is popular and it is hard to say what is influencing what? Is it the popularity of Pistols out in the real world that influences what we see being used in the movies and on TV? Or is it what we see in Movies and TV that influences our choices of pistols out in the real world? Perhaps it is a combination of both?
My list is based on my own personal experience and does not represent the entirety of types of Pistol designs available.
I have made a fair amount of video reviews for the Dan Wesson Line of AIrguns that encompass Table Top and Field Test Reviews on several versions of the Dan Wesson line: BB, Pellet, Airsoft, in a variety of barrel and color choices. It has been a while, so why not make another Review Video to revisit the Dan Wesson Line and so this time here we have the Steel BB version in a 2.5 inch barrel length. As always I will test they CO2 Revolver to find out what the velocity is and how accurate it is shooting at a paper target. Also make sure to watch my Table Top Video for specifications, details and closeup video.
Here we go with the Velocity test! I placed a brand new CO2 in the ASG Dan Wesson 2.5 inch Gold CO2 BB Revolver and shot a cylinder full of 4.5mm steel BB’s that weigh 5.1 grain through my Chronograph. The temperature was average so about room temperature. Only the last 4 of my shots registered on my Chronograph as it was acting up a bit on me at first two shots but I did manage to average 332 fps with the last four. The first two shots would have been a little bit faster had they registered on my chronograph so this may have brought up the average a bit to say around 334…
I then placed a fresh paper target 30 feet down range and proceeded to unload a full 6 round cylinder into it, I was shooting in single action with the hammer cocked back between shots. I was also using a semi rested shooting position with my hands resting on a sand bag up front and seated in the back for stability. Generally speaking even with Steel BB’s I can get close to a 1-2 inch grouping with hess Dan Wessons but this time my 6 shot grouping only produced a 3 inch group? It was probably me as there is always some human error involved and each test can result in different results so keep that in mind. The grouping was well centered out of the box but the ASG Dan Wesson 2.5 inch Gold CO2 BB Revolver does have fully adjustable sights in case yours is a bit off.
It never get’s old loading up the shells with ammo and placing them in the cylinder followed by either quick action shooting or more relaxed and accurate single action shooting, then repeating again and again… The original Dan Wesson line of revelers has been around for a long time now and if I am not mistaken was the first Airgun revolver to use reloadable shells. We now have more refined 715 version of the Dan Wesson which does have some improvement but the original versions still hold strong and are very capable and fun shell loading revolvers that come it a bit lower price tag then the newer 715 versions so no matter which version you get you will have lot of fun shooting and reloading these enjoyable Airguns!
Type: BB Revolvers. Manufacturer: ASG Model: Dan Wesson 2.5 inch Gold Materials: Mostly metal. Weight: 1.9 pounds. (862 grams) Barrel: Metal non-rifled. Propulsion: CO2 x 1. Action: Revolver, single and double action. Ammunition Type: 4.5mm Steel BB's. Ammunition Capacity: 6 rounds (removable shells). FPS: 327
Trigger Pull: The ASG Dan Wesson 2.5 inch Gold CO2 BB Revolver shoots in true modern revolver style offering single and double action. The double action has a bit of friction to it since the cylinder is being rotate during the first part of the trigger pull and there is a spring fed metal gasket between the barrel and the cylinder that creates a seal but does add some resistance to the trigger pull in double action. Single action is much lighter as expected since pulling the hammer back turns the cylinder removing that friction point from the equasion.
.Accuracy: So far I have not done my Filed Test Shooting Video for the ASG Dan Wesson 2.5 inch Gold CO2 BB Revolver, but I plan to in the near future as a revisit since I have made a lot of similar Field Test Videos for the Dan Wesson line of products in 4.5mm Steel BB and 6mm Airsoft, here is a link to me shooting the 8 inch a while back in my old setup. Wow, this one goes back to 2014 almost 10 years ago!
Build Quality: The ASG Dan Wesson 2.5 inch Gold CO2 BB Revolver overall is really well built with good weight to it and a nice fit and finish, I do like the Gold version in this 2.5 inch version. It is almost all metal with the exception of the grips which are made of a semi hard plastic. One beef I have with the original ASG Dan Wesson line of revolvers are how the grips slide back to access the CO2, closing them can be a bit of a chore as they can come off their track super easily. The other complaint I hear about them is the play in the trigger and hammer side to side.
Realism: The ASG Dan Wesson 2.5 inch Gold CO2 BB Revolver like all the other ASG Dan Wesson Revolvers is very realistic with its realistic pop out cylinder and 6 removable shells you can reuse and load up for numerous rounds of shooting. You can also buy additional shells and have them preloaded and ready to go in the Speed loader to speed things up. Two things about the ASG Dan Wesson 2.5 inch Gold CO2 BB Revolver that take away a bit from the realism would be the non recessed barrel and the rather large space in front of the hammer. A real steel Dan Wesson or even most revolvers do not have this large space. I believe they did this to allow for the internal valve system. The newer Dan Wesson 715 however was designed with a smaller space in front of the hammer.
Pros:
It's a revolver with actual shells! Gives you the feeling of a real 6 shooter.
Almost all metal design with good weight and feel.
Lots of detail in this gun, very well made, fit and finish is very good.
Good power and good accuracy. (going off of already done older reviews)
Fully adjustable rear sight for windage and elevation.
Can add the included accessory rail for more options (optical or red dot sight…).
Dan Wesson licensed via ASG.
Gold finish is unique. (Gold is the Best!)
Moulded and textured pistol grips.
Grips fully hide CO2 screw.
Can shoot in both double and single action for action shooting or more accurate shot placement.
Cons:
Plastic CO2 screw tab.
Plastic grip setup can be a bit awkward to close.
2.5 inch does not have the recessed barrel.
Hammer and trigger are a bit sloppy compared to 715 version.
Comments:
It’s been a while since I reviewed one of the first generation ASG Dan Wesson Revolvers and the ASG Dan Wesson 2.5 inch Gold CO2 BB Revolver does bring back some memories for me going back almost a decade. If I’m not mistaken this revolver was the first one to implement actual removable and reloadable shells making Airgun Replica Revolvers a lot more interesting and realistic! I do kind of prefer the newer 715 version as they are even beefier than the original ASG Dan Wessons and ASG has fixed the sloppy hammer and trigger along with the space in front of the hammer has been reduce making the 715 even that much more realistic.
Watch my Vimeo Video Table Top Review for the Dan Wesson 2.5 Inch Gold BB Revolver:
In this Vimeo Replica Airguns Update Video I take a look at three CO2 Airguns, one is a 4.5mm Steel BB revolver distributed by Barra and two are CO2 Blowback Airsoft Pistols distributed by Umarex. All of these CO2 Airguns I have previously reviewed in slightly different versions either barrel length and finish or Steel BB as compared to 6mm Airsoft So checkout why other reviews on similar version Airguns.
The Barra Barra Schofield CO2 BB Revolver is a replica of the Schofield No. 3 single action revolver and utilizes 6 reloadable shells for a very realistic shooting experience. It is very solid in construction bing made mostly out of metal and weighs in at around 2.4 pounds. This version shots 4.5 mm Steel BBs at a velocity of up to 400 fps. It comes in a variety of barrel lengths and finishes so amen sure to have a look in our Online Replica Airguns Store for what we have available…
Next up from Umarex is the fully licensed Beretta Pietro Mod. 92 A1 CO2 Blowback Semi and Full Auto Airsoft Pistol, this product is distributed by Umarex but is made by KWC. Another solid metal pistol with a hefty 2.4 pound weigth that holds 21 rounds in its full size drop out metal magazine and offers both semi and full auto shooting at the flick of a switch!
Again from Umarex I showcase the Elite Force 1911 Tac CO2 Blowback Airsoft Pistol and like the Beretta Pietro it too is made in the KWC factory for Umarex. The 1911 Tac as the name suggest is a tactical version of the standard Colt 1911 but with some upgrades like a skeletonized hammer and trigger along with an ambidextrous safety, white dot sights front and back and a picatinny rail on the frame for add ons. You can expect velocity to be somewhere in the 400 fps range and the full size drop out metal magazine holds 15 Airsoft BB’s.
If you have been watching my Video Reviews you may have picked up on the fact that I am a bit of a 1911 fan! Perhaps it goes back to my Magnum PI day, I am sure I have watched every episode a bunch of times as a kid and growing up, Tom Selleck’s side arm of choice was the classic Colt 1911 A1 and I guess it brushed off on me. I just like the look and feel of the classic 1911!
There have been a number of BB firing Airguns that have come out over the years so I thought I would go over a few of my favorite versions and talk a little bit about their history and cover a few different version most actually made by KWC based off of their original full blowback CO2 1911.
Here are links to my YouTube Video Reviews for the CO2 BB Airguns I show and discuss in this video:
In this Field Test Shooting Video I test out Crosman’s latest version to the 357 line of CO2 Revolvers and perform both my Velocity and Accuracy test using both .177 caliber Lead Pellets and 4.5mm Steel BB’s to see which ammo has better velocity/power and is most accurate. Also make sure to watch my Table Tope Video Review where I go ver specifications and features and show the Crosman Vigilante CO2 Pellet and BB Revolver up nice and close.
Starting with the velocity portion of my Indoor Field Test Shooting video I placed a brand new 12 gram CO2 into the Crosman Vigilante CO2 Pellet and BB Revolver and tested out some 7 grain .177 caliber Lead Pellets. I was able to average 389 fps in what I would consider normal indoor temperature ranges so you can expect a bit higher velocities in outdoor weather conditions. Moving on the 4.5mm 5.1 grain Steel BB’s, I averaged a bit lower at 360 fps which may seem confusing since the Steel BB’s are lighter than the Lead Pellets? The Lead Pellets fit the barrel much more snug stoping any CO2 from getting around them which helps increase the fps over the Steel BB’s which are a hard metal and need to be slightly smaller in diameter and therefore do let some CO2 get by reducing the pressure behind them.
For my accuracy porting of the the Indoor Field Test I was going to place 6 shots from each magazine into my paper target setup 30 feet down range but ended up using all 10 rounds for the pellet magazine, perhaps because I was just having too much fun :) Since the BB magazine only holds 6 rounds my shot grouping for BB’s only included 6 shots so keep that in mind for the final results. All said and done the Lead Pellets outperformed the Steel BB’s once again getting about a 1.5 inch grouping over the 2.5 inch grouping for the Steel BB’s. And I know the Crosman Vigilante CO2 Pellet and BB Revolver is more than capable of getting a .5 to 1 inch grouping from previous Field Tests I have made using similar 357 type Crosman Revolvers.
The Crosman Vigilante CO2 Pellet and BB Revolver is just one of those must have old school classic Air Pistols I think everyone should own at least some sort of version of. I do like the look of the Vigilante barrel with it’s more modern and aggressive design and functional top and bottom rails for adding on accessories. The ability to choose what ammo type you want to shoot is also a plus and the price point is bang on for a nice CO2 Air powered Revolver.
Type: Pellet & BB Revolver Manufacturer: Crosman Model:Vigilante Materials: Metal and Plastic. Weight: 2 pounds (908 grams). Barrel: 6 inches rifled. Length: 11.36 inches. Propulsion: CO2 x 1 Action: Revolve , single and double action trigger. Ammunition Type: 4.5mm Steel BB's / .177 caliber Pellets. Ammunition Capacity: 6-BB / 10-Pellet round rotary magazines. FPS: 465-BB’s / 435-Pellets.
Trigger Pull: The trigger pull on the Crosman Vigilante CO2 Pellet and BB Revolver is rather nice in single action with virtually zero take-up and it has a not too light weight with a predictable feel to it. In double action it does get much longer and heavier but still very usable. If you have larger thicker finger then you may want to start off in single action as the finger opening is a bit tight.
Accuracy: I have not specifically tested out the Crosman Vigilante CO2 Pellet and BB Revolver so far but I would be very surprised if it was any different than the standard Crosman 357 I tested back in 2012. Other than the shape of the outer barrel, both of these guns are virtually the same including the frame and the 6 inch barrels. Back in 2012 when I tested out the Crosman 357 I averaged 402 fps using 6.9 grain pellets and was able to get a 1 inch multi-shot grouping at 30 feet away from my paper target. Not sure if this was the entire 10 round mag or not? I will be making an update Field Test Shooting Video so we will see if I can replicate these results with the Crosman Vigilante CO2 Pellet and BB Revolver.
Build Quality: The Crosman Vigilante CO2 Pellet and BB Revolver is a fairly basic pistol that incorporates a plastic outer barrel and inner steel barrel, the grips are also plastic as expected and so are the magazines and sights. Most everything else is metal including the receiver, trigger and hammer. This line of Crosman 357 pistols has been around for decades so you can expect hours of fun and reliable shooting with it.
Realism: There are for sure a lot more realistic looking Revolvers out there with swing out cylinders that except shells just like their real steel counterparts but where the Crosman Vigilante CO2 Pellet and BB Revolver shines is in performance. You will get more shots per CO2, higher fps and better accuracy with the Crosman Vigilante CO2 Pellet and BB Revolver over other more realistic Revolvers on the market.
Pros:
Inexpensive Pellet revolver with a proven track record that goes back decades.
Good usage of metal parts where you need them most. (Metal trigger, hammer, frame, barrel, CO2 Tab screw
Single and double action trigger for action and more focused shooting.
Excellent accuracy and good power with a reasonable amount of shots per CO2.
Fully adjustable rear sight.
Can mount a bunch of accessories on the picatinny barrel top and bottom rails.
CO2 and CO2 tab are nicely hidden and use all metal.
Comes with both a Pellet and BB magazine.
Cons:
Outer barrel is plastic but very solid. Metal would have added a bit more weight and perhaps better balance?
Grips and trigger pull length may be a bit long for smaller handed people when shooting in double action.
Not your most realistic revolver in terms of replicas out there but I would say more usable than most.
No white dots on the sights.
The Crosman Vigilante CO2 Pellet and BB Revolver is basically a reskinned Crosman 357 at the end of the day but I have to say it is my favorite looking Crosman 357 out there with its aggressive barrel design. And the added bonus are the top and bottom Picatinny rails which make for mounting accessories like Red Dots, Lasers and Tac Lights super easy! if you’re looking for function over realism at a price point that is more than fair then pick yourself up one of the Crosman Vigilante’s from our Replica Airguns Store!
Perhaps you might call this a followup video since I already made a full Field Test Shooting Video of the all black version of this pistol and you may wonder if the color of a gun could in some way effect how it performs? Well I don’t think color would really matter but it has been over 6 years since I did my original Field Test Shooting video fo the Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver and so perhaps some things have changed, maybe my shooting is better or worse? At any rate let’s find out.
Starting off with my Chronograph test I was able to get an average 6 shot velocity of 348 fps which is about 40 fps less than my testing 6 years ago of 390 fps, perhaps the temperatures where a bit different? Perhaps the valve setups of the guns was not the same? By the way the temperature was 23 degrees Celsius in the indoor Airgun Sea Can Shooting Range and I was using a brand new 12 gram CO2 along with 5.1 grain zinc coated steel BB’s.
Moving on to the accuracy test, surely I would get a similar 1 inch 6 shot grouping from the Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver, after all it’s been 6 years and I must be a much more advanced shooter… Well there again the Chrome Umarex Colt Python 357 Magnum CO2 BB Revolver did not perform as well as the black one from my 2014 Field Test? Again maybe the steel BB’s I was using where not of the same quality? Maybe I simply had one too many espresso shots? As the video shows this time around I was only able to get about a 2 inch 6 shot grouping from the Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver. Still not bad but I was hoping for better result or at least the same as before.
I could do this test again and get completely different results using perhaps another brand of CO2 on a warmer day with higher quality Steel BB’s and just maybe with me on my game a little bit better? At the end of the day 350 fps is perfectly fine for putting holes in pop cans and a 2 inch group at 30 feet will get you on most targets every time so I’m not going to sweat it too much. If you are looking for a shell loading CO2 BB Revolver the Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver is for sure one of my top picks.
Type: BB air revolver Manufacturer:Umarex. Model: Colt Python 375 Materials: Almost entirely all Metal. Weight: 2.75 pounds (1218 grams). Barrel: 5.5 inches, metal non-rifled. Propulsion: 12 gram CO2. Action: Revolver, single & double actions. Ammunition Type: 4.5mm steel BB's. Ammunition Capacity: 6 round cylinder. FPS: 400.
Trigger Pull: The trigger pull on the Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver is good in both single and double action, it’s nice that you have the shorter lighter single action trigger for slower more accurate shooting but you can also blast away in double action when you feel like it. The hammer on the Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver is firm with not very much wiggle which some other revolvers in this category do have.
Accuracy: Based on my results shooting the Umarex Colt Python 357 which is essentially the same gun in a different finish. The results I got shooting my 6 round group from a 30 foot out semi rested position where good overall. Vertically there was about a 2 inch spread while horizontally there was about a 1 inch spread. I did find the plastic tips on the brass shells seemed to be a bit tight at first and this is when I did most of my Chronograph and target shooting. I believe the tightness effected the consistency of the FPS which also effected the accuracy especially up and down. I did get one shot out of the Umarex Colt Python 357 well over the claimed 400 fps but again the fps was rather erratic most likely because of the snug BB fit due to shell break-in.
Build Quality: The Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver being mostly metal has a very good build quality and is on par with the Dan Wesson 715 shell loading revolver. It has a nice weigth adn balance to it and feels really good in the hand! The only real plastic I could find was in the grips and the shell tips. Fit and finish was also good with no noticeable chrome wear or sloppy workmanship. It will be interesting to see how the Chrome finish wears over time compared to the black finishes fodun on most KWC made Airguns.
Realism: TheUmarex Colt Python 357 Magnum Chrome CO2 BB Revolver overall is a close copy a the real steel Colt Python 357 styled revolver. I did notice the rear portion of the receiver (between the rear cylinder and hammer) to be a bit longer perhaps to accommodate the CO2 valve length, but other than that, this pistol is super close to the original Colt Python 357 styled revolver it is based on. Again being all metal gives this CO2 BB revolver very realistic weight and feel and the loadable brass shells make using this gun almost exactly like using a real shell loading revolver but for much less cost per shot and of course a lot less recoil on the hands and noise to be had.
Pros:
Shells loading revolver give you the feeling of loading and shooting a real revolver.
Mostly all metal design.
Lots of detail, well made, chrome looks nice, not sure if it will wear better than the black finish found on most KWC made pistols?
Good overall weight, almost 3 pounds.
Should have good overall power, accuracy and shots per CO2 (based on my previous Colt Python testing).
Fully adjustable sights.
Well hidden CO2 Screw.
Recessed barrel.
Nice Trigger pull in both single and double action.
Cons:
Grips are a bit rough and wood grain is only OK.
Grips may be a bit large for people with small hands.
Decent enough Colt Python 357 replica but the frame is a bit long between the cylinder and the hammer.
Comments:
It’s been a while since I reviewed a Shell Loading Airgun and this one is pretty much the same Airgun I have reviewed in the past in both the KWC and Umarex Distributed forms. It has been almost 6 years since I took a look at one on my table and it still hods up today. I plan on performing another Field Test Shooting Review for the Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver to see if I can replicate the same good results I did back in 2014 when I tested it out on my deck. If you’re looking for a shell loading revolver in the 357 design then for sure checkout the Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver as an option.
My Vimeo Table Top Review for the Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver:
Type: Airsoft Pistol. Manufacturer:KWC. Model: M1911 Materials: Almost entirely all Metal. Weight: 1.97 pounds (894 grams). Barrel: 4.5 inches, metal non-rifled. Propulsion: 12 gram CO2. Action: Semi auto, single action only with full blowback. Ammunition Type: 6mm Plastic Airsoft BB's. Ammunition Capacity: 14-15 rounds full size drop out metal magazine. FPS: 360+.
Trigger Pull: The Single Action Only trigger pull on the KWC M1911 CO2 Blowback Airsoft Pistol is exactly as it should be and just like what you would find on a real steel Colt 1911 pistol. That would be short, light and crisp. As there is no double action mode, you are required to rack the slide back to chamber a rounds and cock the hammer for the first shot, afterwards the blowback action will do this for you.
Accuracy: I wasn’t overly impressed with the accuracy of the KWC M1911 CO2 Blowback Airsoft Pistol when I tested it out in the Replica Airguns Indoor Sea Can Airgun Range but it is what it is. The M1911 shot really high and a bit loose getting about a 5 inch 10 shot grouping, perhaps a hop-up adjustment was in order but this is how it shot right out of the box which is how I test all my Airguns. In terms of power the KWC M1911 CO2 Blowback Airsoft Pistol was bang on shooting .25 gram Airsoft BB’s at right around 350 fps.
Build Quality: The KWC M1911 CO2 Blowback Airsoft Pistol like the other all metal KWC made 1911’s out there being sold under different company names, is a good value Blowback 1911 Airgun no matter which version you get. It’s not the best or worst, right about in the middle but most of the bugs have been worked out since this is one of the longes CO2 1911’s out there and for the most part has stayed about the same. I find the finish does come off a bit easy but when this happens it kind of gives the 1911 Airgun a more realistic and slightly worn in look to it.
Realism: The KWC M1911 CO2 Blowback Airsoft Pistol is a One to One replica of the real steel M1911 A1 and does a great job at replicating it. You would be hard pressed to see any differences in the Airgun version and the .45 caliber firing version until you pick one up and work the parts a bit, even so pretty much all the mechanical parts work the same as a real steel M1911 A1 including the ability to filed strip the Airgun version and gain access to the hop-up and other internal parts.
Pros:
All metal construction.
Full length blowback action with nice heavy recoil.
Accurate Colt M1911 A1 replica.
Single action only trigger feels good, short light and crips.
Accurate trigger design and working grip safety.
Metal magazine holds the CO2 and 14-15 Airsoft BB’s.
No ugly white writing (warning instructions) on the slide of the gun.
Fully filed strippable.
Adjustable Hop-up.
Recessed barrel for added realism.
FPS is just about perfect, just over 360 fps using .20 gram BB’s, not too powerful but Canada import friendly.
Cons:
Finish on KWC guns can wear off quickly in the high spots but has gotten better over the years.
Full blowback action will eat up a lot of CO2.
Comments: I have always been a fan of the 1911 pistol and the KWC M1911 CO2 Blowback Airsoft Pistol is no exception to this. Like all of the KWC 1911’s out there being redistributed by the big airgun companies the KWC version is really no different other than more simple KWC branding and with no licensing on the Airgun to speak of. Some people prefer the cleaner look to it and some will like to have licensed versions, to each their own. Do some looking around on our website and find a KWC made 1911 you like best, perhaps a simple KWC M1911 A1 like the one reviewed here or maybe a more tactical version with all the more modern updates to it like a rail, ambidextrous controls and tactical triggers and hammers.
My Vimeo Video Review for the KWC M1911 CO2 Blowback Airsoft Pistol:
If you have not already watched my Preview video for both of these Airsoft pistols then make sure to watch that video for details and specifications along with some nice tight shots of each Airsoft gun.
Another multi gun Field Test Shooting Review, in this Indoor Sea Can Field Test Shooting Video I test out the KWC M1911 and PT92 Full Blowback CO2 Airsoft Pistols. I first place 5 6mm .25 gram plastic Airsoft BB’s through my Chronograph to find out what the real world velocity is for each Airsoft Pistol and then I perform my accuracy test where I shoot multiple rounds into a paper target 30 feet down range to see how close of a grouping I can get with each Airgun. I use a seated and rested shooting position to eliminate as much human factor as possible. By the way is used a brand new 12 gram CO2 and the temperature was 25 degrees Celsius (77 degree Fahrenheit) inside the Airgun Sea Can Shooting Range.
Starting with the KWC M1911 CO2 Blowback Airsoft Pistol I averaged 351 fps with the fastest shot being 353 and the slowest shot 345, so very consistent for sure! Accuracy for the KWC M1911 CO2 Blowback Airsoft Pistol could have been a bit better, I had to adjust my aim point to just under the bottom rings and even so the KWC M1911 wanted to shoot high, I was able to get around a 5 inch 10 shot grouping but was hoping for a bit better.
Next I tested out the KWC PT92 CO2 Blowback Airsoft Pistol which does have a full auto option. For the velocity portion of my Field Test the KWC PT92 did shoot a bit after than the MWC M1911 getting an average fps of 388 with the fastest shot hitting 396 and the slowest shot at 383 so again very consistent performance. Since the KWC PT92 CO2 Blowback Airsoft Pistol is capable of full auto shooting I decided to shoot 5 rods on my paper target to get a base accuracy and this resulted in a bit of a lateral spread fairly close to the bullseye about 4-5 inches apart. I then did a mag dump and as expected pretty much sprayed 6mm Airsoft BB’s all over the place but most shot a bit high and to the left probably because of the blowback recoil action.
The KWC M1911 and PT92 CO2 Blowback Airsoft Pistols are both classic Airguns and great options if your looking for a 1911 or Beretta styled Airgun to add to your collection without all the markings and white writing on them.
