What goes perfectly with guns and ammo... Flashlights! If you can't see it you cant' shoot it!

I wanted to bring to everyones attention the Fenix line of flashlights we will shortly be bringing to the Canada Replica Airguns store. These lights are high quality yet very well priced so make sure to check back in a bit for the addition of the Fenix Flashlights to the Replica Airguns Store.

The Fenix models I show off in the YouTube video are the TK45 -TK15 - LD22 - PD22, a rather nice selection that should cover most lighting requirements.

Some Features and Benefits of Fenix Flashlights:

• Use Top quality Cree XLamp XM-L LEDs for highest efficiency and LED lifespan.
• Heat-sinks to make sure the LEDs do not overheat.
• Use the Optic Ultra Clear Glass Lenses that also produce a perfect mix of Throw and Spill.
• A constant current regulation circuit, which keeps the flashlights in constant brightness regulation. Unlike traditional flashlights output will not dim over the life of the battery.
• Waterproof to IPX-8 (2 Meters) standard with Anti-shock.
• Type III Hard Anodized Scratch Resistant Finish. 

Fenix TK45:

• 760 Lumens
• 200 Meter Throw Beam
• 232 Hours Max Runtime
• IPX-8 Waterproof (2 Meters)
• Type III Hard-anodized Anti-abrasive finish
• Impact Resistant 

Fenix TK15:

• 337 Lumens
• 215 Meter Throw Beam
• 142 Hours Max Runtime
• IPX-8 Waterproof (2 Meters)
• Type III Hard-anodized Anti-abrasive finish
• Impact Resistant

Fenix LD22:

• 190 Lumens
• 100 Meter Throw Beam
• 110 Hours Max Runtime
• IPX-8 Waterproof (2 Meters)
• Type III Hard-anodized Anti-abrasive finish
• Impact Resistant

Fenix PD22:

• 190 Lumens
• 101 Meter Throw Beam
• 97 Hours Max Runtime
• IPX-8 Waterproof (2 Meters)
• Type III Hard-anodized Anti-abrasive finish
• Impact Resistant

Make sure to watch my YouTube Video Preview on the Fenix line of Flashlights:

Buy Fenix Flashlights in the Canada Store

I already posted that I recently hit 10,000,00 YouTube video Views but I have been hinting about there being another Giveaway/Contest. After much thought I wanted to have a way that more than just one person could benefit from this. So I decided to list a bunch of my Canada Store products on sale. (Sorry US customers but I have a lot more restrictions in the US when it comes to what I can do with my pricing).

These Canadian sales will be in effect from now until October 10th and to make things even better, one lucky shopper during this time will get their entire order for free (This includes US Customers too).

So make sure to get in on the savings and the chance to get your order free!

In this "Update Video" I also show off some new previously owned guns added to my collection, an Airsoft ASG shell ejecting CZ 75, a no-name KSC Airsoft shooter and a Gamo Combat .177 caliber pellet revolver. And if you're into spring piston break barrel pistols, make sure to watch for my customized Exisco XSP180 .177 caliber Verminator!

Ten Million Video Views Giveaway Plus CZ 75 - Glock Airsoft - Gamo Combat Pellet Revolver

Here is a sample of some of the items on sale right now...

Buy King Arms M4A1 in Canada 

Buy King Arms M4A1 in the US

Buy Webley Alecto in Canada

Buy Webley Alecto in the US

Buy EKOL ES55 in Canada

Buy EKOL ES55 in the US

Check out all items on Sale Now!

When it comes to Airguns and Blank Guns, it's not often that an item is actually more money to buy in the US but with the Webley Alecto, it was actually more money in the US so I got to thinking, why not ship our Canada version to our US customers so they can save a few bucks! Both the US and Canada Webley Alecto are the same with only one exception, the Canada version has been detuned but this can be easily rectified with a simple valve modification (Instructions delivered after purchased from Replica Airguns).

Of course you can still buy the Alecto here in Canada at the already low Canadian price.

Buy Webley Alecto in Canada   -   Buy Webley Alecto in the US

Click here to check out my Field Test for the Baikal Drozd Blackbird

Type: BB Machine gun.

Manufacturer:Baikal.

Model:Blackbird IZH MP-661K.

Materials: Metal & Polymer.

Weight: 4 pounds.

Barrel: 8 inches, metal-rifled.

Propulsion: CO2 or (Bulk air with adaptor).

Action: Electronic trigger with 1-3-6 round burst & 300-340-600 Rounds Per Minute.

Ammunition Type: 4.5mm steel BB's.

Ammunition Capacity: 900 rounds.

FPS: 360-500.

Trigger Pull: The trigger pull on the IZH Drozd Blackbird is nice and light due to the fact that the trigger is not mechanical but is instead an electronic on-off switch that operates a solenoid. The solenoid pulsates in turn hitting the CO2 valve release. This is how the single fire and burst fire rates are achieved, by means of electronics.

Accuracy: The Drozd Blackbird is designed to be a machine gun and so testing it in single shot mode for accuracy is kind of taking it out of its element. Even so it did reasonably well, but when when I flicked it over to full auto it actually seemed to tighten up and start grouping even more centered and closer together considering the vast amount of rounds coming out of the barrel all at once :)

Build Quality: This is a typical Russian made gun, all business and less importance put on looks but even so it is visually appealing, at least to me! Everything works exactly as it should and even though the main shell is made out of plastic, it's really more of a weapons grade polymer so there is no cause for concern here. There are a fair amount of metal components like the factory barrel, much of the magazine and many internal parts. This air gun is very durable!

Realism: The Baikal Drozd Blackbird IZH MP-661K is not a replica, but it does look like a sub machine gun of sorts, I'm really just not sure exactly what it looks like as it kind of has its own look. When you start shooting it, looks just don't seem to matter anymore, all you can think about is how much damage is happening down range.

Purchased From: The Replica Airguns Store.

Pros:

• Very well made BB machine gun.

• Excellent power.

• Good accuracy in all shooting modes.

• Uses the 12 gram and 88 gram CO2 (Can also convert to bulk air)

• Stock version can shoot up to 600 rounds per minute.

• Rifled barrel.

• Adjustable rear sight for windage and elevation.

• Improved rail sits higher and is longer then the classic Drozd.

• Drastically Improved magazine capacity (motor hopper system)

• Many mods available for this gun.

• Great for pest control, especially the ones that are on the move.

• 10 out of 10 on the fun factor.

• Made in Russia.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

Cons:

• BB Hopper motor sound is a bit annoying!

• A bit more accuracy in semi auto mode would have been nice.

• On the pricey side.

Comments:

The Baikal Drozd Blackbird IZH MP-661K takes all the fun you get with the Classic Drozd and gives you even more fun. It may be one of the more pricy BB machine guns on the market but it is well worth the extra cost to get such a quality product that not only is great out of the box but can also be modified in so many ways to improve its performance and looks dramatically. If you are looking for the absolute top player in the BB Machine gun category then the Drozd Blackbird is the top contender with its excellent build quality and performance along with the nearly unlimited modifications available to make the Blackbird perform up to anyones standards.

My Vimeo Video Review for this Russian made Blackbird BB Machine gun:

Buy this gun in Canada   -   Buy this gun in the US

Click here to check out my Table Top Review for the Baikal Drozd Blackbird

I'm kind of doing this one backwards this time around. I was going to do the table top review of the Baikal Drozd Blackbird first but the weather was just too nice to pass up today to not get outside and give this gun a thorough testing.

I will be posting the table top review in a few days with all the specification (Here it is now) but if you're looking for some basic info on the Blackbird you can checkout our online store where you can find some statistics on the Drozd Blackbird and you can also checkout my Drozd Classic Review where I do a short comparison between the Drozd Classic and the newer updated Blackbird version.

I had a lot of fun shooting this gun, it lays down a lot of steel in a very short amount of time and has a virtually endless 900 round BB hopper that just keeps on going. During my testing I shot close to 400 rounds or more using one 88 gram CO2 cartridge and even near the end the Baikal Drozd Blackbird had pretty good feet per second performance.

My Baikal Blackbird does have some upgrades: (JimC Barrel, Full Auto-High RPM Mod Chip, Added Accessory Rails, Red Dot Scope, Tactical Light, Laser and Bulk Air kit) but the stock version is "almost" as fun :)

Enjoy this Vimeo video, it was crazy fun to make!

Buy this gun in Canada   -   Buy this gun in the US

Thought I would share this photo of a Magazine doubler for his Umarex MP5K PDW one of my viewers (Daniel) sent to me. He lives in the UK and bought his from a supplier out his way. I don't sell them sorry but I have included an Amazon link for my US viewers.

Sometimes you just got to make a video because you can and because it's just plain old fun! And that's why I made this video of me shooting some cans with dual full auto BB machine guns. One is my full auto converted and trusted Cybergun Mini UZI and the other is my newly acquired ZMZ Tyrex PPA-K-01 Russian Machine Pistol.

So sit back and enjoy, I know I did :)

Buy this gun in Canada   -   Buy this gun in the US

One of my viewers sent some photos of his custom sanded and polished two-tone ASG STI Duty One 1911. Ken did an awesome job and it makes me want to do the same to mine :)

He started out by sanding off the paint with 500 grit sandpaper and working his way finer right up to 2000 grit and then finishing off with some Meguiar’s NXT Generation metal polish. The results are amazing -  see for yourself!

Buy this gun in Canada 

Buy this gun in the US

Type: BB Machine gun.

Manufacturer:Baikal.

Model:IZH MP-661K.

Materials: Metal & Polymer.

Weight: 3.5 pounds.

Barrel: 8 inches, metal-rifled.

Propulsion: CO2 or (Bulk air with adaptor).

Action: Electronic trigger with 1-3-6 round burst & 300-340-600 Rounds Per Minute.

Ammunition Type: 4.5mm steel BB's.

Ammunition Capacity: 30 rounds.

FPS: 360-500.

Trigger Pull: The trigger pull on the IZH Drozd is nice and light due to the fact that the trigger is not mechanical but is instead an electronic on-off switch that operates a solenoid. The solenoid pulsates in turn hitting the CO2 valve release. This is how the single fire and burst fire rates are achieved.

Accuracy: When I was sighting the Baikal Drozd in I got several 5 shot groups well within 1 inch 30 feet out from the target. But when I did my actual video accuracy test, the Drozd did not perform as well, getting more like a 2 inch group, still very reasonable for a gun that can shoot 600 rounds per minute out of the box and 1200 rounds per minute when modified. With metal streaming out the barrel like that you are pretty much going to hit what ever you point it at, the odds are in your favor!

Build Quality: This is a typical Russian made gun, all business and less importance put on looks but even so it is visually appealing, at least to me! Everything works exactly as it should and even though the main shell is plastic it is really a weapons grade polymer so there is no cause for concern here. There are a fair amount of metal components like the factory barrel, most of the magazine and many internal parts.

Realism: Again, the Baikal Drozd IZH MP-661K is not a replica, but it does look like a sub machine gun in many ways, I'm really just not sure exactly what it looks like but when you are shooting this gun you really don't think much about this point because you are too busy grinning!

Purchased From: The Replica Airguns Store.

Pros:

• Very well made BB machine gun.

• Excellent power.

• Good accuracy in all shooting modes.

• Uses the 12 gram CO2 - a bit cheaper! (Can also convert to bulk air)

• Stock version can shoot up to 600 rounds per minute.

• Multiple stock lengths.

• Rifled barrel.

• Adjustable rear sight for windage and elevation.

• Removable magazine hold BB's and CO2.

• Many mods for this gun.

• Great for pest control, especially the ones that don't stay still.

• Made in Russia.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

Cons:

• 12 Gram CO2 - you need to change it often!

• Top Accessory rail is a bit short and low.

• Rear stock can get lose sometimes (just add some tape to tighten it up a bit).

Comments:

The Baikal IZH MP-661K is one of the most fun BB machine guns out there and well worth the extra cost to get such a quality product that not only is great out of the box but can also be modified in so many ways to improve it's performance and looks dramatically. Sure the Baikal IZH MP-661K now has a big brother, the Drozd Blackbird, but the Blackbird may be just a bit of overkill for some, I kind of like the Drozd Classics more compact size and if you can't nail what your shooting at with 30 rounds then your doing something very wrong! The Drozd is really the epitome of extreme BB gun weaponry!

My Vimeo Video Review for this Russian made BB Machine gun:

Buy BB Rifles in Canada

Buy BB Rifles in the US

Mil3 sent me some more updated photos of his customized Cybergun Tanfoglio Witness 1911 now with the Sight Rail add on.

Buy this gun in Canada   -   Buy this gun in the US

The Webley Alecto (AKA: Zoraki HP-01) may not fit in exactly as a "Replica" Airgun, although it does resemble a bloated Dessert Eagle! But it is an Airgun worthy of spending some time reviewing an this is now my third Vimeo Video review for the Webley Alecto. My first Video Review was a Table Top Review where I covered most of the Webley's basic operation. My second Vimeo Video was a Chronograph Test to see what my Webley Alecto could do performance wise for FPS.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

I really wanted to do a video of this gun just shooting because that's what it does best, put lead down range very accurately! So I setup three cameras to capture it all from just about every angle I could think of and I set up 30 feet away from my target and shot 5 rounds in a rested position using a Red Dot Scope. The results where not surprising - pretty close to a 1/2 inch grouping!

If you're looking for a compact, hard hitting, accurate target or small pest control Air gun then look no further, the Webley Alecto has the goods!

Watch the full Multi-angle Vimeo Video of my Webley Alecto Shooting Test:

Buy this gun in Canada

Buy this gun in the US

I can't help but share some of the photos my happy viewers and customers send me and it seem like the hot item right now is the Cybergun Tanfoglio Witness 1911 CO2 BB Pistol yet again.

These latest photos are brought to you by Mil3 who added rubber grips and an accessory rail to his Tanfoglio Witness 1911. He said the rubber grips only needed some slight carving out on the back side to make them fit.

Buy this gun in Canada   -   Buy this gun in the US

 

I've had a few questions about replacing the gips on the Cybergun Tanfoglio Witness 1911 BB pistol and if it is possible to use standard 1911 wood grips? The answer is yes if you don't mind spending about 15-20 minutes removing just a bit of the wood material in a few spots on the 1911 Wood Grips

Here are the instruction thanks to one of my Customers and viewers Michel:

First of all the holes are in the right place thank god for that! A dremel is the ideal tool youll need, and the whole mod.

1. Mark out the material you want to remove.
2. Remove the material on bottom part of each grip with a dremel using a cicular sandpaper bit.
3. Repeat on other grip .On the top of the grip on the mag release side you might have to remove material to clear pin.

After on the other side of the mag release button make sure there is enough clearance for when you depress the button.

Here are a few pictures of the mod. Have fun:

Buy this gun in Canada   -   Buy this gun in the US

Another filed test video in the series. This one is of the Umarex Walther PPK/S CO2 4.5mm BB pistol, I show you both my regular unmodified all black PPK/S and shoot it through my Chrony Chronograph with an averaged reading of 282 FPS, not bad considering the manufacturers claim is 295.

I also shoot 8 rounds with my stock Umarex PPK/S at a target to see what kind of accuracy I get, and just for fun I shoot a 15 round magazine into the same target with my modified fully-auto sliver slided PPK/S.

To finish things up, I slowdown the action just a bit using my high speed Casio camera to capture the blowback action of both my stock and modified Umarex Walther PPK's.

Enjoy my YouTube Video of my Umarex Walther PPK/S CO2 BB pistols getting Chronographed, shooting at a target and slowed down a bit with my High Speed Camera.

Buy this gun in Canada   -   Buy this gun in the US

As promised, here is my Vimeo video Chronograph test along with some more shots on target for an idea on the accuracy for the Cybergun GSG 92 Beretta 92FS copy.

My Chronograph results where very good with an average 8 shot FPS result of 314, right in line with the manufacturers specifications! I also took some extra time to do some more target testing and shot the GSG 92 BB shooter at a target from 20 feet out in a free standing position and I didn't get the best grouping from it today but hey, it's got full auto too so how important is accuracy?

Lastly a pulled out my Casio high-speed camera and took some video of the blowback action of the Cybergun GSG 92FS Beretta replica at 210 frames per second.

Enjoy my Vimeo Video of the Cybergun GSG 92 CO2 BB gun getting Chronographed, shooting at a target and slowed down a bit.

Buy this gun in Canada

Buy this gun in the US

I already have a customized full auto Drozd Blackbird who can pass up another Dorzd when the price is right! I will be making a double Drozd video down the road :)

My new Classic Drozd came with the Full Auto mod chip, the JimC hand made barrel, a 68ci Nitro Duck 4500 PSI carbon fiber tank and bulk air hose.

I also got the Red Dot scope with my new purchase but used one of my rial risers that fit perfectly giving my new Drozd an AR look to it.

Buy Drozd Guns in Canada

Buy BB Guns in the US

In my recent acquisition of guns from my friend, I also procured a customized Crosman 2240 .22 caliber CO2 bolt action air pistol. It came customized with a new RJ Machine bolt, longer barrel and wood grips.

All I need to add is a nice Red Dot or low powered pistol scope and this classic CO2 air pistol will make a really nice target shooter.

Related Posts:

• FULL METAL UZI BLOWBACK CO2 .177 BB GUN ON ITS WAY

• CYBERGUN MINI UZI BB GUN REVIEW

• CYBERGUN - KWC MINI UZI BB GUN FULL AUTO MODIFICATION

Today I got my Cybergun Full Auto CO2 powered BB shooting Mini UZI out for a Chrony Chronograph test. As stated by the factory, this BB shooting Mini UZU is supposed to shoot right around 344 fps which is not bad for a true blowback airgun. And what I mean by true blowback - it's when an airgun uses some of the CO2 power to cycle the action of the gun, which cocks the firing mechanism and loads a BB all in the blink of an eye - just like a real semi auto shooter.

The Cybergun Mini UZI shot nicely between 350 and 360 fps - again, another impressive result even on a not too warm day! (10 degrees Celsius - 50 degrees fahrenheit)

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

I also took the opportunity to film the Cybergun Mini UZI shooting in full auto, at target while I used my high speed Casio camera to slow down what was actually happening. The result is you can really see all that's going on while you fire this dynamic air gun.

Keep in mind that the Cybergun Mini UZI does not come from the factory with the full auto feature. It is an easy mod however, and I have a video here on how to do it.

Watch my Vimeo video of the Cybergun Mini UZI Chronograph and Full Auto Shooting Test:

Buy this gun in Canada

Buy this gun in the US

Related Posts:

• WEBLEY ALECTO .177 AND .22 CALIBER MULTI-STROKE PNEUMATIC TARGET PISTOL

• WEBLEY ALECTO - ZORAKI HP-01 .177 & .22 CALIBER PCP AIR PISTOL REVIEW

I have been wanting to do a Chrony test for my Webley Alecto as I didn't have a chronograph at the time of my original review. Today was the day I got around to it and I am really happy with the results I got. Mine came with the pressure release valve adjusted fairly conservatively. I imagine this is a generic setting that is set the same for both the .177 caliber and .22 caliber versions based on the lighter .177 caliber having a faster muzzle velocity and hittiing the 495 fps with less pressure required.

In the case of a .22 caliber pellet and it having approximately double the weight, the pressure release valve may be adjusted a bit on the light side, but I was only guessing and I wanted to make sure I didn't have an air pistol shooting over 500fps as this would make it a restricted firearm here in Canada and although I have my restricted firearms license, I didn't want to have this particular pistol governed by the rules and regulations of a restricted firearm.

So lets get to my results. I was using crosman premium 14.3 grain pellets for this test, far from the heaviest .22 caliber pellets you can get. I also tested my Webley Alecto out with one, two , three and even four pumps. Keep in mind pumping the Webley Alecto four times is not recommended by the factory and could cause long term damage to your Alecto. I did it with mine because I will ultimately get asked what an extra pump will give you in terms of extra fps. 

• One Pump: 270.9 fps

• Two Pumps: 390.5 fps

• Three Pumps: 449.8 fps

• Four Pumps: 487 fps & 496.3 fps

So as you can see, I did not go over 500 fps even with four pumps which is exactly where I wanted this pistol to be around. If you do decide to do the pressure release valve mod on your Webley Alecto, I would recommend you also test yours out on a chronograph just in case your results are different then mine, and keep in mind modifying the Webley Alecto could void your warrantee. The last thing you want to be carrying around is an illegal firearm!

Buy Webley Guns in Canada

Buy Webley Guns in the US

This post is for any of you lucky North American Baikal Makarov owners out there, or for anyone thinking of getting a Baikal Makarov MP-654k.

We had some custom CO2 screws made up that fit the Baikal Makarov's BB-CO2 magazine perfectly and make the Makarov replica look virtually identical to the real steel. It's kind of a shame the Baikal Makarov didn't come this way from the factory but at least now you have the option of improving on an already great product.

Flush Metal CO2 Screw for Baikal Makarov

C$17.99