A while back I made a full Table Top Review and Field Test Shooting Review for my sample - pre-production KWC Mauser M712 Broomhandle CO2 Blowback Airsoft Pistol. Well we finally got the finished product in our Canada Replica Airguns Store and not only in the 6mm Airsoft version but also the 4.5mm Steel BB versions!

I most likely will not be doing another table top review for the KWC Mauser M712 Broomhandle CO2 Blowback BB and Airsoft Pistol since I already made a fairly comprehensive Table Top Review of my sample - pre-production Airsoft unit. The only real difference I could find visually is the markings on the left side of the receiver indicating the pistol is made by KWC in Taiwan and the Caliber it shoots.

I will however be making a side by side Field Test Shooting Comparison Video to see if the production Airsoft version shoots the same as my pre-production model and also how the 4.5mm steel BB version compares in terms of fps and accuracy side by side.

We also have magazines for both of these KWC pistols in our Canada Store!

Make sure to watch my Vimeo Update Video where I show these two very realistic KWC Mauser M712 Broomhandle CO2 Blowback pistols in detail:

Buy the KWC Masuer M712 in the Canada Store

Buy the KWC Masuer M712 in the US Store

Type: Airsoft revolver.

Manufacturer:KWC.

Model:357.

Materials: Mostly metal with some plastic construction.

Weight: 2 pounds (900 grams).

Barrel: 2.25 inches, non-rifled.

Propulsion: 12 gram CO2.

Action: Revolver, single & double actions.

Ammunition Type: 6mm plastic Airsoft BB's.

Ammunition Capacity: 6 rounds.

FPS: 360+.

Trigger Pull: The trigger pull on the KWC 357 2.5 Inch CO2 Airsoft Revolver is good in both single and double action, even better than the Dan Wesson and S&W 327 TRR8 shell loading revolvers, most likely because the spring tension that pushes the inner barrel to make contact with the cylinder is noticeably lighter on the KWC 357's. Even the hammer is smoother and has less wiggle, just a better trigger and hammer mechanism overall.

Accuracy: This is yet to be determined but I did notice on the KWC Airsoft versions of their shell loading Airsoft Revolvers, that they do have a built in preset Hop-up by way of a small rubber bar that goes along the top of the barrel just inside the rear portion. This will create some backspin which will keep the Airsoft BB's trajectory more level but should also help them stay more accurate in general as compared to a plastic Airsoft BB that is not spinning but rather just floating through the air.

Build Quality: The KWC 357 2.5 Inch CO2 Airsoft Revolver being mostly metal has a very good build quality, perhaps even better than the Dan Wesson and S&W 327 TRR8 shell loading revolvers, even the weight of the KWC 357 is noticeably more! The only real plastic or rubber I could find was in the grips and the shell tips. Fit and finish was also good with no noticeable wear or sloppy workmanship.

Realism: The KWC 357 2.5 Inch CO2 Airsoft Revolver overall is a close copy a the real steel 357 styled revolver. I did notice the rear portion of the receiver (between the rear cylinder and hammer) to be a bit longer perhaps to accommodate the CO2 valve length, but other than that this pistol is super close to the original 357 styled revolver it is based on. Again being all metal gives this CO2 Airsoft revolver very realistic weight and feel and the loadable brass shells make using this gun almost exactly like using a real shell loading revolver but for much less cost per shot and of course a lot less recoil on the hands that a real 357 magnum or even when shooting 38 special shells for that matter ;)

Available in the:Replica Airguns Store.

Pros:

• Shell loading revolver adds to the realism!

• Mostly all metal design.

• Pretty all the parts work as they would in a similar real steel revolver of this type.

• Good overall weight, Very dense because of the shorter barrel.

• Should have good overall power, accuracy and shots per CO2 (based on Colt Python testing).

• Fully adjustable rear sight for windage and elevation.

• Well hidden CO2 Screw.

• Recessed barrel.

• Not much white writing on the gun.

• Nice easy Trigger pull in both single and double action.

Cons:

• Short 2.25 inch barrel will rob power but the Dan Wesson style long barrel Airsoft revolvers are know to be a bit hot for some Airsoft games so this may be a good thing.

• Grips may be a bit large for people with small hands.

• All black sights with no white dots are not great on dark backgrounds or low lighting.

Comments:

The KWC 357 2.5 Inch CO2 Airsoft Revolver is yet another addition to the increasing lineup of shell loading revolvers available today in both Steel BB and Airsoft versions. The 2.5 inch reviewed here is meant to be the compact version with its snub nosed barrel but I would have to say it is not a small gun at all coming in at 2 pounds and with rather large grips and a pretty large cylinder to pack around. But then again, that may be just what you are looking for? The shorter barrel will lower the fps a bit which may bring it back in line with the requirements of some Airsoft fields and the addition of the built in preset Hop-up, this pistol should shoot pretty well out at medium and even longer ranges.

My Vimeo Table Top Review for the KWC 357 2.5 Inch CO2 Airsoft Revolver:

Buy Airsoft Pistols in Canada 

Buy Airsoft Pistols in the US

Buy theKWC Black 2.5 Inch Airsoft Revolver

Type: BB Airsoft Pistol.

Manufacturer: KWC.

Model:Model 226-S5 (Sig Sauer X-Five).

Materials: 99% all metal build.

Weight: 2.75 pounds.

Barrel: 4.33 inches, brass, non-rifled.

Propulsion: CO2 x1.

Action: Semi auto blowback, double and single action.

Ammunition Type: Airsoft 6mm plastic BB's.

Ammunition Capacity: 25 rounds

FPS: 390

Trigger Pull: The trigger pull on the KWC Model 226-S5 Sig Sauer CO2 Blowback Airsoft Pistol is what you would expect from a blowback pistol with true single action capability. nice and light with a short take-up in single action and also decent when shooting in double action which for the most part you will not be doing since the blowback pre-cocks the hammer for single action shooting.

Accuracy: This is yet to be determined since I have not conducted my Field Test Shooting review for the KWC Model 226-S5 Sig Sauer. Based on my previous review of the Cybergun branded and licensed Sig X-Five 4.5mm Steel BB version, it should do well with heavy blowback, reasonable power but not a lot of shots per CO2.

Build Quality: Very good, pretty much an all metal construction, good weight and craftsmanship, slide wiggle is minimal, fit and finish is good. As with many of the KWC airguns that use an electromagnetic powder coating, the finish looks great but is thin so it does wear off on the high posts and where metal on metal movement takes place.

Realism: Compared to the real steel Sig Sauer X-Five, the KWC version is pretty close, although it does have a bit different looking slide in terms of the groves or slide serration's, and of course there is no Sig Sauer licensing on the KWC version. You also do not get the ugly white warning instructions so there is a bit of a trade off here and the KWC version also comes with a fully adjustable rear sight which is nice if your aim point is off a bit. Over all the KWC Model 226-S5 Sig Sauer CO2 Blowback Airsoft Pistol is super realistic with its full blowback operation, full size drop out metal magazine and ability to filed strip just like the real steel Sig Sauer it replicates.

Available From: The Replica Airguns Store

Pros:

• All metal construction - Extremely good weight and solid feeling gun. As real as you can get.

• Heavy blowback action.

• Accurate X-five replica without the Sig Licensing or white warning instructions.

• Awesome training gun.

• Both SA & DA with excellent trigger pull, very smooth and light.

• Has the fully adjustable rear sight for windage and elevation.

• Nice high capacity full size drop out metal magazine.

• Fully field strippable.

Cons:

• Top loading magazine only.

• Sacrifice some fps and shots per CO2 because of the heavy blowback but worth it.

• Finish is prone to wear on the high spots and metal on metal areas 

Comments:

I am really looking forward to my Field Test Shooting video for this Airsoft pistol, the KWC Model 226-S5 Sig Sauer is a nice big heavy pistol with lots of blowback, right up my alley! I am hoping the hop-up will keep this gun in the same accuracy zone as the 4.5mm Cybergun X-Five version, I may just have to test them head to head to find out? If you're a Sig Sauer fan like me, and require a solid useable Airsoft pistol for gaming or just plinking, the KWC Model 226-S5 Sig Sauer CO2 Blowback Airsoft Pistol should do the job well and at a price point that is very reasonable.

My Vimeo Videos for the KWC Model 226-S5 Sig Sauer CO2 Blowback Airsoft Pistol:

Buy the KWC Model 226-S5 in Canada 

Buy Airsoft Pistols in the US

Some more CO2 pistols I will be doing Table Top and Field Test video reviews for in the near future. Some of them I have already reviewed in different caliber versions, either 4.5mm Steel BB or 6mm Plastic Airsoft.

From KWC I show off two revolvers styled after the 357 and if you watched my Umarex Colt Python 357 Review then you will notice the similarities between these KWC made revolvers since they are all made by KWC. The Model 357 6 inch version is finished in Chrome and made to shoot 4.5mm Steel BB's while the KWC Model 357 2.5 inch shoots 6mm Plastic BB's and is in all black. At this time I do not have these KWC revolver listed in the Replica Airguns Canada Store but should have them listed fairly soon...

I also showcase three CO2 6mm Airsoft semi auto pistols from ASG that I have already reviewed in their 4.5mm Steel BB equivalents. The ASG CZ 75 P-07 Duty Non-blowback, the ASG CZ 75 D Compact Non-blowback and the ASG Bersa BP9CC Blowback.

Make sure to watch my quick Update Vimeo Preview Video for these fine CO2 pistols to see them up close and personal...

Buy Umarex Colt Python in Canada

Buy Umarex Colt Python in the US

Buy ASG CZ 75D Compact CO2 Pistol in Canada

Buy ASG CZ 75D Compact CO2 Pistol in the US

Buy ASG CZ 75 P-07 in Canada

Buy ASG CZ 75 P-07 in the US

Buy ASG Bersa BP9CC in Canada

Buy ASG Bersa BP9CC in the US

While the weather is still holding on, I setup some clay pigeon targets at varying further out distances than the typically 30 feet I shoot on my deck. I paced out approximately 40-60-80-100+ foot ranges conservatively thinking this would be a good test to see if a 6mm Airsoft rifle could effectively hit targets at any of these ranges using heavy .36 gram Airsoft BB's.

Make sure to checkout my other video I shot on the same day that features my Baikal Drozd Blackbird taking it through this exact same long range shooting test.

So today I brought out an Airsoft Sniper rifle since this is what it's made to do, the model being the ASG AW .308 Airsoft Sniper. As with many of my shooting videos I captured all the fun using a bunch of different cameras and camera angles along with a dedicated lapel microphone so the audio also comes in nice and clear.

So make sure to watch my YouTube video and see how the ASG AW .308 Airsoft Sniper Rifle does shooting clay pigeons up to 100 Plus feet away...

Buy AW .308 Airsoft Rifle in Canada

Buy AW .308 Airsoft Rifle in the US

This Article and Video expresses my views and opinions on this matter and should not be taken as legal advice.

Main points covered:

• Uncontrolled Firearms do not require a Firearms License within Canada to own and operate.

• What is an Uncontrolled Airgun and Airsoft Gun?

• What is an Uncontrolled Blank Gun / Starter Pistols?

• What about Fully Automatic Airguns and Airsoft Guns?

• What about Replica Guns?

NOTE: Controlled Firearms require a POL (Possession Only License) , PAL (Possession Acquisition License) or R-PAL (Restricted Possession Acquisition License) within Canada to own and operate. 

MEMORANDUM D19-13-2

Firearm – a barreled weapon from which any shot, bullet, or other projectile can be discharged and that is capable of causing serious bodily injury or death to a person, and includes any frame or receiver of such a barreled weapon and anything that can be adapted for use as a firearm.

“Uncontrolled”firearms are those devices that, although falling within the definition of a firearm in the Criminal Code, are exempt from specific legal requirements of the Firearms Act and its regulations, as well as from other legislative provisions. “Uncontrolled” firearms should not be subdivided into any of the non-restricted, restricted, or prohibited classes. The following types of firearms are deemed “uncontrolled”:

Flare, blank, rivet and industrial guns: Any device that is designed exclusively for signaling, for notifying of distress, or for firing blank cartridges or for firing stud cartridges, explosive-driven rivets or other industrial projectiles, provided that the importer intends to use it only for the purpose for which it is designed.

NOTE: (Toy guns and starter pistols do not generally qualify as firearms. However, some toy or model guns and starter pistols may be designed with very realistic mechanisms or appearances (e.g., color, size, scale, translucency) and resembling a real make and model of a firearm. In such cases, they may be considered replica firearms even if they are made of plastic, die cast zinc, or other material.)

Low muzzle velocity/energy guns: Any barreled weapon that is not designed or adapted to discharge projectiles at a muzzle velocity exceeding 152.4 meters per second (500 feet per second) and at a muzzle energy exceeding 5.7 Joules, or to discharge projectiles that are designed or adapted to attain a velocity exceeding 152.4 meters per second (500 feet per second) and an energy exceeding 5.7 Joules. Both thresholds of 152.4 mps and 5.7 Joules must be exceeded for the firearm to be considered “controlled”. This requirement exempts firearms that fire below the threshold velocity with a standard projectile, but exceed the threshold velocity when fired with a high-velocity projectile. 

Airsoft guns and certain types of paintball guns or markers may qualify as a replica firearm, if the muzzle velocity of the projectile does not cause serious bodily harm and their external features are clearly designed to resemble a specific and readily identifiable make and model of a firearm. To be considered a firearm, within the meaning of the Criminal Code, an airsoft gun must have a muzzle velocity in excess of 111.6 meters per second (366 feet per second).

NOTE: This memorandum used to state when using a .20 gram BB but does not specify this BB weight anymore?

NOTE: The term air gun is a colloquial term referring to BB or pellet guns. Such guns operate either as spring- powered, gas-powered, or electrically powered. If the muzzle velocity of the air gun is less than 152.4 mps (500 fps)/5.7 joules but still able to cause serious bodily injury to a person, it may be considered an “uncontrolled” firearm. Airsoft guns and certain types of paintball guns may qualify as a replica firearm (see paragraph 49 of this memorandum).

Replica firearms:

“Replica firearm” is defined as any device that is designed or intended to exactly resemble, or to resemble with near precision, a firearm, and that itself is not a firearm, but does not include any such device that is designed or intended to exactly resemble, or to resemble with near precision, an antique firearm.

For a device to be a replica firearm it must meet all three requirements:

• (a) it cannot be a firearm, meaning it does not discharge a projectile with sufficient energy to cause serious bodily injury or death to a person. If the device is a firearm, then it cannot be a replica firearm (and vice versa);

• (b) it must resemble exactly, or with near precision, a real existing firearm of an identifiable make and model. With respect to visual examination, note that the maximum observing distance is one at which the equivalent make and model of the firearm can be identified. This distance will vary from one firearm make to the next. For example: A Luger pistol has a very distinctive silhouette as compared to other makes and is therefore more readily identified from further away. The examination of the object is something more than casual, but less than detailed. The device does not need to be so close that markings are identifiable; and

• (c) it cannot be designed or intended to exactly resemble, or to resemble with near precision, an antique firearm. 

RCMP Website "Air Guns"

1. Air guns that are "Controlled" Firearms for purposes of both the Firearms Act and the Criminal Code

These are air guns with both a high muzzle velocity (greater than 152.4 meters or 500 feet per second) and a high muzzle energy (greater than 5.7 joules or 4.2 foot-pounds). The "muzzle velocity" is the speed of a projectile at the instant it leaves the muzzle of a gun, normally expressed in meters per second or feet per second. The "muzzle energy" is the energy of a projectile at the instant it leaves the muzzle of a gun, expressed in joules or foot-pounds. Air guns need to meet both standards to be classified as "Controlled" firearms for purposes of the Firearms Act.

These high-powered air guns are subject to the same license and registration requirements as a conventional "Controlled" firearm. Owners and users are also required to store, transport, display and handle them safely in accordance with the regulations supporting the Firearms Act.

Usually, the manufacturer's specifications are used to determine what muzzle velocity and muzzle energy an air gun was designed to have. This information may be available in the user's manual or on the manufacturer's website. If the information is not available, individuals can call the Royal Canadian Mounted Police Canadian Firearms Program (CFP) at 1-800-731-4000 and ask to speak to a firearm technician to find out if the air gun is considered to be a firearm for purposes of the Firearms Act.

High-powered air rifles are generally classified as non-restricted firearms. However, the classification depends on the exact design of the air gun. Air rifles manufactured to resemble an assault rifle could be non-restricted, restricted or prohibited depending on the exact model imitated. High-powered air rifles would also be prohibited firearms if fully automatic or if they have a sawed-off barrel. They could also be restricted firearms if they have a folding stock that reduces the overall length to less than 660mm. 

Additional thought on this subject: Even though Uncontrolled Firearms are not governed by the same laws that apply to Controlled Firearms within the Firearms act and do not need to be handled or stored similar in the same way you are required to handle, transport and store a Controlled Firearm, we need to treat our Uncontrolled Airguns, Airsoft Guns and Blank guns with care and go over and above what is expected when had handle, transport and store them.

Make sure to also checkout my full Table Top Review where you will find more details and specifications for the KWC Luger P-08 Airsoft replica pistol which is virtually the same gun as the 4.5mm BB version with the only real difference being the ammo type and the amount of rounds per magazine (21 rounds for the 4.5mm BB version and 15 rounds for the 6mm Airsoft version).

I have also already made a full Field Test Shooting Review for the Airsoft version of this CO2 Blowback Pistol where I got very similar results using slightly heavier .25 gram Airsoft BB's so again, make sure to checkout that YouTube Video Filed Test Review.

Basically in this YouTube video, I shoot the 4.5mm Steel BB version of the KWC P-08 Luger head to head against the Airsoft Version to see how they compare in terms of Feet Per Second speed and Accuracy from30 feet away from a paper target using a semi rested shooting stance. As expected the heavier 4.5mm Steel BB's shot a bit slower but did seem to have a slight advantage in the accuracy department.

Watch my YouTube Field Test Head to Head Shooting video of the KWC Luger P-08 CO2 Blowback Replica Pistols to see how they both compared:

Buy the KWC Luger P-08 in the Canada Store

Great news, we just received our shipment of KWC P-08 Luger CO2 Blowback Pistols and yes we have them in both 4.5mm Steel BB and 6mm Plastic Airsoft so this news should make everyone very happy!

This shipment is only for our Canada Replica Airguns Store at this time but we hope to have them in the US Replica Airguns Store shortly when we add the KWC line.

The KWC Mauser is still a bit of a ways off since it was still a sample product when I tested it.

So make sure to pick yours up ASAP before we sell out of them as we have limited supplies and if you haven't already watched my Table Top Video and Field Test Video for the KWC P-08 Luger then make sure to do so.

Buy KWC Luger Airsoft Version in the Canada Store

Buy KWC Luger BB Version in the Canada Store

• Make sure to also checkout my Table Top Review for the KJWorks KP-06

I like shooting 1911 styled pistols, the KJWorks KP-06 1911 HI-CAPA Blowback Airsoft Pistol is no exception, it's a bit beefier in terms of overall size and even handle grip thickness but held well for me.

So let's get right to the test results! I started off by shooting 5 rounds through my Chronograph using a brand new CO2 along with .25 gram plastic Airsoft BB's. My 5 shot average velocity was 329 fps and the temperature on this day was not too warm, perhaps around 15-18 Celsius. So on a warmer day you can expect to get higher fps out of the KJWorks KP-06 Airsoft Pistol.

Moving on to the Target accuracy performance, I shot 10 .25 gram rounds using the KJWorks KP-06 from a 30 foot distance using a semi rested position (Sand bag in the front, standing in the back). I was able to place the bulk of the shots within a 1.5 inch group but one shot came out extending the group to about 2 inches. Overall the placement was fairly well centered on target, just a hair to the right but one could easily adjust the green dot sights for both windage and/or elevation as required.

The single action 1911 type trigger is exactly what you would expect from a 1911, short, light and crisp. The blowback action is very solid and this pistol settles down after each shot very quickly. If you don't mind a 1911 styled Airsoft pistol with a bit bulkier size than the KJWorks KP-06 1911 HI-CAPA may just make a good choice.

Buy the KJWorks KP-06 Blowback Airsoft Pistol in Canada

I've already done a full Table Top Review that included a Pre-test for this war pistol replica where you will find more details and specifications for the KWC Mauser Airsoft pistol.

In this official Field Test Shooting Video, I do my standard Chronograph test where I shoot a series of .25 gram 6mm Plastic Airsoft BB's using a brand new CO2 cartridge to see what kind of real word Feet Per Second performance I can get out of the KWC Mauser CO2 Blowback Airsoft Pistol. On this medium temperature day I averaged a very quick 415 fps which may be a bit hot for most Airsoft matches. The temperature was fairly cool at 14 Celsius or 57 Fahrenheit so the fps will only get faster on a warmer day.

During my Accuracy Shooting Test, I set myself up 30 feet away using a semi-rested stance (Sand bag up front, standing in the back). I did have to adjust my rear sight to the lowest position and even then I found that I needed to aim at the lowest ring on the target to get my shots close to the center and even then they placed a bit high. Even though the KWC Mauser Airsoft Pistol shot high the results where very good, resulting in a 10 shot grouping in the 1.5 to 2 inch range!

Overall I really enjoyed shooting the KWC Mauser CO2 Blowback Airsoft Pistol, the trigger is super nice and short with a light single action release. The blowback action is very quick and snappy which really makes the full auto rate of fire very high. You will go through a 21 round magazine in a hurry! It is a sample or prototype pistol and I would imagine that KWC could work on getting the FPS juts a bit lower so it would be more usable in an Airsoft Game, and while they're at it they should bring the shot placement down just a bit. Other than that it's a really great Airsoft War pistol replica worthy of addition to anyone collection.

Buy KWC Mauser Products in the Canada Store

I've already done a full Table Top Review that included a Pre-test for this pistol where you will find more details and specifications for this KWC Luger P-08 Airsoft replica pistol.

In this official Field Test Shooting Video, I do my standard Chronograph test where I shoot a series of .25 gram 6mm Plastic Airsoft BB's using a brand new CO2 cartridge to see what kind of real word Feet Per Second performance I can get out of the KWC P-08 Luger CO2 Blowback Airsoft Pistol. On this medium temperature day I averaged 335 fps which is a nice velocity for most Airsoft matches. The temperature was fairly cool at 14 Celsius or 57 Fahrenheit.

During my Accuracy Shooting Test, I set myself up 30 feet away using a semi-rested stance (Sand bag up front, standing in the back). I did have to adjust my aim point at the lowest ring on the target to get my shots near the center. The results where not my best for the KWC P-08 Luger CO2 Blowback Airsoft Pistol, or perhaps this pistols best performance, resulting in a 10 shot grouping in the 4 inch range. Pretty sure this Airsoft pistol can do better!

Overall I thoroughly enjoyed shooting the KWC P-08 Luger CO2 Blowback Airsoft Pistol, the trigger is nice, short and light and the blowback action reminded me a lot of the more sluggish blowback you get from a 1911 styled pistol. You can't help but notice the toggle popping up with every shot which can be distracting at first but it sure comes in handy when it locks back on the last shot clearly indicating that the pistol is empty of rounds. The KWC P-08 Luger CO2 Blowback Pistol is for sure an Airsoft replica any war pistol enthusiast will want to have.

Buy KWC Products in the Canada Store

Type: Airsoft Pistol.

Manufacturer:KWC.

Model:Mauser (M1932 / M712 Schnellfeuer).

Materials: Almost entirely all Metal.

Weight: 3.15 pounds (1424 grams).

Barrel: 5 inches, metal non-rifled.

Propulsion: 12 gram CO2.

Action: Semi & full auto, single action only with full blowback.

Ammunition Type: 6mm Plastic Airsoft BB's.

Ammunition Capacity: 21 round full size drop out metal magazine.

FPS: 400+.

Trigger Pull: The Single Action Only trigger pull on the KWC Mauser CO2 Blowback Airsoft Pistol is what you would expect from a full blowback, true single action only pistol, it has a little bit of take-up and then a smooth fairly light release. Of course when in full auto mode, just press and hold the trigger till the ammo is gone, but don't hold the trigger too long since when the BB's run out, the gun will keep firing as there is no bolt lock back on empty.

Accuracy: It took me a while to figure out exactly where this pistol was actually shooting, but once I realized the KWC Mauser was shooting way high and I adjusted the rear sight all the way to the bottom, I started getting shots at least on to the paper, I did have to hold really low to get near the bulls eye but keep in mind this is a sample pre-production model so some modifications may be in order to correct the rather high shot placement. Over all the accuracy at 30 feet out was very good with about a 2 inch group from 10 shots. Full auto was as you would expect, more of a spray and pray. I do have to say I was surprised by the feet per second performance, even with .25 gram Airsoft BB's I still shot well over 400 fps on a new CO2 cartridge.

Build Quality: The KWC Mauser CO2 Blowback Airsoft Pistol is well built being that it is pretty much entirely metal. It weighs in at a whopping 3.15 pounds so be prepared for a heavier gun but you can choose to hold it two handed by using the forward magazine as a sort of fore-grip. Again this was a pre-production sample but even so the fit and finish looked and felt good. I really liked the dark grey finish and very believable plastic wood grain grips.

Realism: The KWC Mauser Airsoft Pistol is spot on replica of the M1932 / M712 Schnellfeuer with as far as I can tell all the same working parts including the semi and full auto selector switch. The KWC Mauser also has a full working bolt, hammer, safety, adjustable rear sight and of course full size drop out metal magazine that holds the CO2 and Airsoft BB's.

Purchase from:The Replica Airguns Store

Pros:

• Nice quick snappy blowback.

• Lots of metal and good overall weight - very heavy

• Very high fps and good accuracy.

• Very good replica of a real Mauser (M1932 / M712 Schnellfeuer) with all working parts.

• Nice short single action light trigger.

• Shoots in both semi and full auto selectable.

• Will come in 4.5mm Steel BB and 6mm Plastic Airsoft.

Cons:

• Bolt does not lock back on last shot.

• Seemed to shoot really high even when adjusted as low as possible.

• Not totally sure when we will have it in stock?

Comments:

Overall the KWC Mauser CO2 Blowback Airsoft Pistol is that all metal version we kind of hoped Umarex had made, and from what I can tell in the KWC product brochure, this one should be available in both 4.5mm Steel BB and 6mm Plastic Airsoft so this should make everyone pretty happy :) Other than the rather high shot placement I really liked the KWC Mauser especially the super high fps and ultra fast rate of fire in full auto mode. Another must have classic war pistol to add to the collection!

My Vimeo Video Review for the KWC Mauser CO2 Blowback Airsoft Pistol:

Buy KWC Mauser Products in the Canada Store

I have some really new guns from KWC for you today, so new that we don't even stock them yet (hopefully soon) and one of then is an un-marked and un-branded sample version that didn't even come in a proper box. Pretty sure this will be the first YouTube video review of it!

It's great that we are starting to see more of the classic older guns, it really give you a chance to appreciate some of the original designs that helped the development of the more modern guns we now have today.

In this preview-review video we take a quick look at the KWC P-08 Luger and KWC Mauser C96 CO2 powered Blowback Airsoft pistols. I will be doing a full table top and field test shooting video for each gun so make sure to check back for them later. I even do a quick comparison to the same style 4.5mm BB pistol offerings from Umarex I already reviewed, the Umarex P-08 and Umarex C96.

Both the KWC P-08 Luger and C96 Mauser are pretty much all metal with full drop out magazines that hold the CO2 and the 6mm plastic Airsoft BB's, the KWC luger holds 15 rounds while the KWC Mauser holds 19 rounds. Since both Airsoft pistols are full metal they come in nice and heavy with the C96 Mauser weighing just a hair over 3 pounds and the P-08 just a bit under 2 pounds. Both pistols have full blowback operation with very nice single action only triggers and while the P-08 shoots in semi-auto only the C96 can select fire in semi and full-auto modes.

According to the KWC product brochure, both of these new classic CO2 blowback pistols will be offered in 4.5mm Steel BB and 6mm Plastics Airsoft versions. As of right now we do not have any in stock as we are planning an order based on these two samples. We like what we see and will be bringing them in to our Canada and possible US online store so stay posted as once we have verification of an order on rout, we will be offering a pre-sale option so you can reserve yours.

Watch my preview-review of the KWC P-08 Luger and Mauser C96 CO2 Blowback Airsoft Pistols:

Buy KWC Products in the Canada Store

Buy Umarex Products in the Canada Store

• Make sure to also checkout my Field Test Shooting Review for the KJWorks KP-06

Type: 6mm Plastic BB Airsoft Pistols.

Manufacturer:KJWORKS.

Model: KP-06 (1911 HI-CAPA Replica)

Materials: Metal slide & frame.

Weight: 2.6 pounds (1180 grams).

Barrel: Metalnon-rifled smooth bore.

Propulsion: 12 gram CO2.

Action: Blowback, Single action only.

Ammunition Type: 6mm plastic Airsoft BB's.

Ammunition Capacity: 28 rounds.

FPS: 366+ fps.

Trigger Pull: The trigger pull on the KJWORKS KP-06 is what you would expect from a true 1911 single action only trigger, it has very little take up with a smooth crisp and super light release to it.

Accuracy: I shot the KJWORKS HI-CAPA KP-06 from 30 feet out in semi rested position and got very good test results. I was able to place 10 rounds in the 2 inch range with most of the shots being very well centered (sights can be adjusted for windage and elevation if need be). The KJWORKS HP-06 1911 styled HI-CAPA Airsoft Replica shot right around 331 fps range on this mid temperature day while conducting my 5 shot average chronograph test. The blowback recoil is very heavy heavy due to the large full length blowback slide and the green fiber optic sights are a joy to use.

Build Quality: As expected, the KJWORKS KP-06 build quality is just like all the other KJWORKS Airsoft guns I've tested so far, excellent the fit and finish is the best in my opinion even when compared to my my 4.5mm steel BB shooters. When using these guns regularly, areas that are painted like the metal friction areas show very light wear which is rarely the case with metal built blowback airguns. Again the tolerances between the moving parts like the slide and frame are very tight showing excellent workmanship and machining from KJWorks.

Realism: The KJWORKS KP-06 6mm Airsoft Pistol is a replica of a Tactical High Capacity styled 1911 45 Auto and is a great looking and functioning replica. You will not find any actual licensing on this pistol and the CO2 magazine does stick out a bit to accommodate the 12 gram CO2 but other than that this Airsoft pistol looks and works near exactly like a real 1911 tactical semi auto and is fully field strip-able.

Available in the: Replica Airguns Store

Pros:

• Pretty much all metal pistol with good weight to it.

• Full length heavy blowback operation.

• Excellent fit and finish as always with KJWorks pistols.

• High capacity full size drop out magazine that holds 28 rounds.

• Very accuracy and well centered on target.

• Like the green dot fiber optic sights and fully adjustable rear sight.

• Like the stainless highlights and ambidextrous safety and long rail for accessories.

• Field strip-able.

Cons:

• Grips are wide, may not fit the hands of small shooters.

• FPS was not super high but gets the job done.

• To fully field strip this pistol requires tools.

Comments:

The KJWorks KP-06 1911 HI-CAPA is another excellent full blowback Airsoft pistol from KJWorks. It is a rather large Airsoft pistol, overall wider, longer and thicker than a standard 1911 so small hands may not be suited to this pistol but if you can manage the KJWorks KP-06, you will be treated with a very responsive and highly reliable Airsoft gun. I really like the updated more tactical add ons like the super long tactical lower rail, machined trigger and hammer, fiber optic adjustable sights, textured grips and ambidextrous safety. The quality on all KJWorks Airsoft guns is top notch so yes they do cost a bit more but you really do get what you pay for here, the KJWorks HI-CAPA KP-06 will look good and perform well for a very long time so your return on investment is well worth it!

My Vimeo Table Top  Review of the KJWorks KP-06 Blowback Airsoft Pistol:

Buy the KJWorks KP-06 Blowback Airsoft Pistol in Canada

In this Vimeo Update Video I show you around some new Pistols recently added to the Replica Airguns Canada Store.

First up, the KJWorks KP-06 1911 HI-CAPA Blowback CO2 Airsoft Pistol in 6mm Airsoft BB. A very sturdy all metal double stack (HI-CAPA) tactical 1911 with excellent fit and finish and performance to match:

• Made by KJWorks.

• CO2 Semi Auto Blowback.

• Mostly Metal Design.

• Full sized drop out metal magazine hold BB's and CO2.

• 12 gram CO2.

• 6mm Airsoft Plastic BB's.

• 28 shot magazine.

• 2.6 pounds (1180 grams).

• Single Action Only.

• 366+ fps.

Next we have the Cybergun Model 75 Tac Blowback CO2 BB Pistol in 4.5mm Steel BB, basically a simplified and more compact version of the Cybergun Tanfoglio Gold Custom: 

• Blowback all metal design.

• Dark Golden brown.

• 12 gram CO2 .

• 4.5mm steel BBs.

• 17 shot full size drop out metal magazine.

• 2.53 pounds (1150 Grams).

• Single Action Only.

• 325 fps.

• Spin up shooting system. 

Make sure to check out my Vimeo Preview Update video showcasing both of these fine CO2 blowback Pistols and stop by the Canada Replica Airguns Store and pick one up!

Buy the KJWorks KP-06 Blowback Airsoft Pistol in Canada

Buy the KWC Model 75 Tac Blowback BB Pistol in Canada

In this Comparison video I go through the benefits and shortcomings of both Blowback and Non-Blowback Airguns. I focus mainly on Airguns but there is a definite crossover with Airsoft guns.

Here are some basic statements that best describe both Blowback and Non-Blowback Airguns.

Blowback Airguns:

• Blowback Airguns usually have a movable slide that moves back and forth with each shot.

• Sometimes the blowback operation is internal (Internal bolt) so there may not be an external moveable slide.

• Some CO2 is used to move the slide rearwards in a Blowback Airgun.

• The Blowback motion of the slide with some blowback airguns can also cock the hammer or internal striker allowing for true single action trigger pull. But not always!

• Some Blowback airguns have the potential for full auto capabilities since they can have a true semi auto action.

• There is some noticeable recoil from the Blowback action simulating the recoil of a real gun.

Non-Blowback Airguns:

• Non-Blowback Airguns can have fixed or movable slides but they will not cycle back and forth with each shot.

• Non-Blowback Airguns tend to have less working parts since no Blowback valves are required or even a moveable slide.

• There are some Blowback and Non-Blowback Airguns that field strip similarly to their real steel counterparts but this is most commonly found in Blowback Airguns.

• Non-Blowback Airguns require the shooter to cock the hammer for single action shooting or use a double action trigger pull for semi auto like performance.

Pros:

Blowback Airguns:

• Blowback Action causes a noticeable recoil which makes the airgun feel more realistic.

• Blowback Airguns in some cases have true semi auto action with true single action triggers which mimic the authenticity of the real steel versions of the guns they replicate much better making them better training tools.

• Having some recoil makes blowback Airguns potentially better training tools.

• Blowback Airguns look really cool when shooting them  and are great action prop guns.

Non-Blowback Airguns:

• Non-Blowback Airguns tend to have less working parts so less to go wrong and more reliability.

• Non-Blowback Airguns can be more accurate since the recoil from the blowback is not a factor.

• Non-Blowback Airguns have more potential power and more shots per CO2 since no CO2 is robbed for the blowback operation.

Cons:

Blowback Airguns:

• Blowback operation can rob some of the power and will also rob how many shots you get from the Airgun.

• Blowback Airguns are effected even more by cold weather and the cool down effect.

• The recoil from Blowback Airguns can effect accuracy for some shooters.

Non-Blowback Airguns:

• Non-Blowback airguns are generally double action when shooting semi auto and so the trigger pull will be longer and heavier.

• Non-Blowback Airguns do not replicate the recoil action of a real gun.

• Non-Blowback Airguns do not look as cool to shoot and are not as good of an action prop gun.

Is an Airgun Good for Self Defense? Another one of those questions I get asked fairly often that's a bit hard to answer in a few sentences... Not all of us have easy access to a 9mm pistol or even a rifle but many of us can get our hands on an airgun fairly easily and they look real enough, I guess that is one thing they have going for them.

But what if the mere sight of what looks like a gun does not scare an intruder off? If you where hoping that would be enough, you may just be out of luck and what if you just brought an Airgun to a "real" gun fight? You are going to be drastically "outgunned" pun intended and here's why. A 4.5mm Steel BB weighs about 5.1 grains and generally you are looking at about 2-3 foot pounds of energy from a CO2 BB gun. Even a .177 caliber lead pellet is only marginally heavier at around 7-8 grains and if you're really lucky you might just get 4 foot pounds of energy out of a CO2 pellet pistol.

So let's take a look at a fairly conservative "real pistol" rounds, the 9mm. The 9mm rounds come in different bullet weighs but you can get a 120 grain 9mm in a plus p ammo with as much as 400 foot pounds of energy and even with that much raw power, many people claim that a 9mm round does not always have enough stopping power to put down a person even when shot multiple times center mass. It just depends what vital organs or arteries you hit that determines if he gets lucky or you get lucky.

Your 5.1 grain 4.5mm Steel BB is not going to do anything if it hits any type of clothing and even if you find some flesh it's just going to piss off the intruder.

My suggestion is to consider a bat or a golf club or a really big knife or just about anything other than an airgun because if the sight of the airgun replica does not scare an intrude away then you are really buggered.

Keep in mind that you need to abide by any laws regarding the use of self defense in your areas. Even just physical force could be considered a crime and at the end of the day you are ultimately accountable for your actions.

Two questions that come up over and over again and to be honest I just hate answering, mainly because both of these questions to me are kind of common sense questions. I feel if someone where to stop and actually think about teh question, the answers would become obvious.

That said, common sense has to be learned somewhere and not all of us are exposed to the same life experiences so here goes...

The two questions are:

• Will this Ammunition Work in my Gun?

• Can I Convert a Blank Gun to a Real Gun?

The answer for both of these question is actually the same! Use the ammo made for your gun and do not try to use anything other than the ammo that was made for your gun. Do not try to modify your gun to shoot anything other than the ammo that was made for it, if you do, you may be breaking the law and could land yourself in jail. If you can follow these rules then your ammo and gun will work as intended :)

So that's pretty much it in a nutshell, watch my YouTube video below as I show you examples of ammo types with visuals on exactly why you need to use the ammo made for your gun. I also talk about the dangers of attempting to modify a blank gun to shoot some sort of real bullet and why it is a very bad idea in so many ways to try and convert a blank gun into a real gun.

Buy the ROHM RG-88 9mm P.A.K. Blank Pistol in the Canada Store

Buy the ROHM RG-88 9mm P.A.K. Blank Pistol in the US Store

Type: Airsoft AR M16 Styled Rifle.

Manufacturer:G&G.

Model:CM16 Carbine GBB.

Materials: Metal and plastic/fiber construction.

Weight: 5 pounds.

Barrel: 10 inches, metal non-rifled.

Propulsion: GBB

Action: Semi & full auto blowback.

Ammunition Type: 6mm plastic Airsoft BB's.

Ammunition Capacity: 30+ round magazine.

FPS: 370+.

I could pretty much copy and paste my review of my G&G CM16 Raider GBB since both of these guns are pretty much the same Airsoft Rifle with different finishings. Instead I will place a link to my G&G CM16 RaiderVersion 2 GBB AR Airsoft Rifle Review and insert some nice photos of the  G&G CM16 Carbine version for you to admire :)

Buy the G&G CM16 Raider GBB Airsoft Rifle in Canada - Buy G&G Airsoft Rifles in the US

I stopped by the ICS Booth, we don't sell too much of their products but have carried a few items from time to time. ICS caries some nice quality Airsoft guns including the M1 Grand with real wood stock, and some AK & AR variants.

One of our suppliers had the new FN Herstal Five-seveN Blowback Airsoft pistol, I believe made by Marushin. Like the real FN Herstal Five-seveN, the pistol is pretty much all polymer including the slide and frame. This pistol also uses CO2 in the full size drop out magazine which should make it fairly powerful.

Looks like there is another Dan Wesson contender available now in the form of a Swiss Arms S&W 357 Magnum 4 inch and 6 inch barreled version, they look really nice and like the Dan Wesson have the realistic reusable brass shells that hold the 4.5mm Steel BB's.

Ever considered owning a  mobile Gunsmith vehicle, look no further, I came across this pimped out Firearms Van complete with machine guns mounted in the front :) Inside was a complete firearms workshop.

Last but not least, we had some fun while in Vegas. I go down for the SHOT Show for business but I also bring my wife and we make time for some non business related activities. I generally stay at the WorldMark resort each time and this year the weather was pretty nice so we where able to get some sun by the pool a couple of days and I even got a tan line! Of course the food and entertainment is always awesome in Vegas.