I’ve already made a bunch of Field Test Shooting Videos for the Umarex T4E P2P HDP 50 Gen 2 CO2 Less Lethal Pistol testing and comparing there different Ball Ammo types for it to see what the Velocity an Accuracy where for .50 caliber 1.6 gram Rubber Ball, 2.7 gram Rubber/Steel Ball and 8 gram all Steel Balls. Make sure to watch those videos for that information.

Todays video is all about “damage”! How much damage can each of these .50 caliber ball options deliver to an object and the object of interest in todays video are a couple of over rip pumpkins that needed putting out of their misery. Luckily when I made this video the weather outside was cooperating with me and I go tI nice break in the rain. This was awesome as I was not looking forward to al the cleanup I would of had to of done if I performed this test inside the Replica Airgun Sea Can Shooting Range.

• Buy the Umarex P2P HDP 50 Gen 2 CO2 Lens Lethal Pistol in Canada

• Buy Paintball Products in the US

This is part three of my three part Indoor Filed Test Shooting Video for the Umarex T4E P2P HDP 50 Gen 2 CO2 Less Lethal Pistol. In this third video I test out the velocity and energy shooting 5 rounds through my Chronograph using the 8 gram All Steel Balls that I purchased on my own to test with this Less Lethal Pistol. I also shoot 5 rounds of the same All Steel Balls into a paper target setup 30 feet down range to get an idea on what to expect accuracy wise with the Umarex T4E P2P HDP 50 Gen 2 CO2 Less Lethal Pistol. I have already uploaded Field Test Shooting Videos one and two where I test out 1.6 gram All Rubber Balls and 2.7 gram Rubber/Steel Balls. If you have not watched my Table Top Video for the Umarex T4E P2P HDP 50 Gen 2 CO2 Less Lethal Pistol, then make sure to do so for closer up video and all the specifications and details.

Umarex claims a max velocity of 485 fps with an energy rating of 13 Joules with the Umarex T4E P2P HDP 50 Gen 2 CO2 Less Lethal Pistol when using their supplied ammo. I am assuming this would be using the Powder Balls as they are the lightest option of Ammo that are included in the box with this pistol and will have the highest velcoity. In my Chronograph testing I shot 5 rounds using the 8 gram All Steel balls. The velocity for the 8 gram All Steel Balls was much slower than the 1.6 gram All Rubber Balls and 2.7 gram Rubber/Steel Balls as expected, but they did stay fairly consistent ranging from a low of 132 fps to a high of 151 fps, averaging 138 fps. The overall energy rating ended up being the slowest by far out of all the rounds I tested in this Less Lethal Pistol, with an energy rating of only 7 Joules. Based on energy alone I would suggest using the All Rubber Balls as they achieved the highest energy rating at 15 Joules, even higher than claimed by Umarex.

View fullsize

Now that we understand that the 8 gram All Steel .50 Caliber All Steel Balls are not only the lowest velocity by a long shot, they also have the lowest energy rating again by a lot as compared to the other rounds tested. Maybe when I compare the accuracy during my target Test the .50 Caliber All Reel Rounds may redeem themselves. After Shooting 5 of the 8 Gram All Steel Rounds into my Paper Target from a distance of 30 feet, I did actually get the tightest grouping, even with a heavily fading CO2 that was near it’s end, so velocity did taper off making the shots shoot lower and lower with each shot. I did throw the final 5th shot out as I could literally see it loft to the target but even with the low CO2 and inconsistent velocity, I got my best grouping from the Umarex T4E P2P HDP 50 Gen 2 CO2 Less Lethal Pistol with a 3 inch grouping just slightly to the left of the bullseye but very close.

I was not surprised with the performance of the Umarex T4E P2P HDP 50 Gen 2 CO2 Less Lethal Pistol using the 8 gram All Steel Balls for this third Field Test. Velocity was much lower as expected than the other lighter rounds tested, but most surprising, the energy was around half of the All Rubber Balls. Perhaps the metal rounds just did not reach their maximum speed in such a short barrel due to them being a so much heavier weight? My conclusion on Ammo choice for the Umarex T4E P2P HDP 50 Gen 2 CO2 Less Lethal Pistol would be to go with either the All Rubber Balls or the Rubber Steel Balls. The All Rubber Balls by far had the highest velocity and energy rating but I did feel like the Rubber Steel Balls even though they where moving slower and had slightly less energy, seemed to hit the target with the most force based on the sound I was hearing while performing the testing. Either round will for sure make an intruder think twice about continuing their course of bad behavior. I will probably do some testing on how each of these rounds effects different targets in the future, I just need to figure out what I want to shoot at…

• Buy the Umarex P2P HDP 50 Gen 2 CO2 Lens Lethal Pistol in Canada

• Buy Paintball Products in the US

This is part two of my three part Indoor Filed Test Shooting Video for the Umarex T4E P2P HDP 50 Gen 2 CO2 Less Lethal Pistol. In this second video I test out the velocity and energy shooting 5 rounds through my Chronograph, using the 2.7 gram Rubber/Steel Balls that I purchased on my own to test with this Less Lethal Pistol. I also shoot 5 rounds into a paper target setup 30 feet down range to get an idea on what to expect accuracy wise with the Umarex T4E P2P HDP 50 Gen 2 CO2 Less Lethal Pistol. In video three I plan to test out the 8 gram all Steel Balls to see they are a viable option with a CO2 Pistol like this designed for much lighter rounds . If you have not watched my Table Top Video for the Umarex T4E P2P HDP 50 Gen 2 CO2 Less Lethal Pistol, then make sure to do so for closer up video and all the specifications and details.

Umarex claims a max velocity of 485 fps with an energy rating of 13 Joules with the Umarex T4E P2P HDP 50 Gen 2 CO2 Less Lethal Pistol when using their supplied ammo. I am assuming this would be using the Powder Balls as they seem to be a bit lighter than the Rubber Balls and will have the highest velcoity. In my Chronograph testing I shot 5 rounds using the 2.7 gram Rubber/Steel balls. The velocity for the 2.7 gram Rubber/Steel Balls was slower as expected but they did stay fairly consistent ranging from a low of 300 fps to a high of 309 fps averaging 304 fps. The overall energy rating ended up being 12 Joules, so obviously lower in fps than claimed by Umarex but close to the claimed 13 Joules. Still a good result close to the claimed raw energy.

View fullsize

The main point to this ammo comparison video is to finds out not only if the heavier 2.7 gram Rubber/Steel Balls will have around the same energy as the lighter 1.6 gram all Rubber Balls, but also to see if they have similar accuracy. In terms of accuracy the 2.7 gram Rubber/Steel Balls did just a little bit better than the 1.6 gram all Rubber Balls, not by a lot but, by about 1 inch with a 5 round grouping of 5 inches. All 5 shots were well entered shooting just a bit high of my aim point by about 3 inches but in general well centered left to right as a grouping.

I was happy with the performance of the Umarex T4E P2P HDP 50 Gen 2 CO2 Less Lethal Pistol using the 2.7 gram Rubber/Steel Balls for this second Field Test. Energy was very close to the claimed 13 Joules and the average 304 fps I got with this ammo felt snappy and got to the target quickly and sounded like they really hit hard. I do like the higher 15 Joules and 450 fps I got from the lighter 1.6 gram all Rubber Balls, so at this point I would probably recommend sticking with them for the most power and energy down range. Next up I test out the 8 gram all Steel Balls to find out if they are even an option or if they are simply juts to heavy for the Umarex T4E P2P HDP 50 Gen 2 CO2 Less Lethal Pistol.

• Buy the Umarex P2P HDP 50 Gen 2 CO2 Lens Lethal Pistol in Canada

• Buy Paintball Products in the US

View fullsize

This is part one of my three part Indoor Filed Test Shooting Video for the Umarex T4E P2P HDP 50 Gen 2 CO2 Less Lethal Pistol. In this first video I test out the velocity and energy shooting 5 rounds through my Chronograph, using the 1.6 gram included Rubber Balls that came with it and then I also shoot 5 rounds into a paper target setup 30 feet down range to get an idea on what to expect accuracy wise with the Umarex T4E P2P HDP 50 Gen 2 CO2 Less Lethal Pistol. In video two I will be testing out the 2.7 gram Rubber/Steel Balls in the same way, and then in video three I will be testing out the much heavier all steel 8 gram rounds to see if they are even usable in a CO2 Airgun designed for much lighter rounds. If you have not watched my Table Top Video for the Umarex T4E P2P HDP 50 Gen 2 CO2 Less Lethal Pistol, then make sure to do so for closer up video and all the specifications and details.

Umarex claims a max velocity of 485 fps with an energy rating of 13 Joules with the Umarex T4E P2P HDP 50 Gen 2 CO2 Less Lethal Pistol. In my Chronograph testing I shot 5 rounds using the 1.6 gram included all rubber balls. I did throwout the first shot as it was about 50 fps lower than the rest, perhaps as it was first out of the barrel which can happen. The other 4 rounds averaged 445 fps with an overall energy rating of 15 Joules, so a bit slow in fps than claimed by Umarex but a higher energy output. Perhaps the fps rating was for lighter rounds like the included 10 powder balls? Still an excellent result with more raw energy than expected which is great for a system designed to deter an intruder!

View fullsize

What good is power if you can not hit the target? That’s why I always test out accuracy as you want your gun to shoot where you point it. With Rubber Balls they tend to “wing” or “curl” a bit in the air which does spread out the groupings a bit over a BB or even Airsoft gun, so I was not expecting under a 2 inch grouping. My goal was to hit the target fairly centered with around a 6 inch grouping and the Umarex T4E P2P HDP 50 Gen 2 CO2 Less Lethal Pistol did exactly that for me, so mission accomplished. I also wanted to find out how many shots to expect from a fresh 12 gram CO2 and my results showed around 20 shots, so you can reload the internal magazine around 4 times before the trigger stops working, which is how you know the CO2 pressure is not adequate enough to shoot any more rounds.

I was very happy with the performance of the Umarex T4E P2P HDP 50 Gen 2 CO2 Less Lethal Pistol using the included 1.6 gram All Rubber Balls for this Field Test. Energy was even 2 Joules higher than claimed by Umarex, and I did not have a single malfunction with this pistol through my testing of all types of ammo I used in videos 1, 2 and 3. I would say the Umarex T4E P2P HDP 50 Gen 2 CO2 Less Lethal Pistol is your best option as a Less Lethal Pistol here in Canada. Will it stop a very determined intruder? Maybe not, but I would feel a little bit safer with the Umarex T4E P2P HDP 50 Gen 2 CO2 Less Lethal Pistol at my side than not having it at all. And a couple well aimed rounds to some soft tissue will for sure make someone reconsider some of their life choices. Stay posted for videos two and three coming out shortly…

• Buy the Umarex P2P HDP 50 Gen 2 CO2 Lens Lethal Pistol in Canada

• Buy Paintball Products in the US

View fullsize

Type: Less Lethal Pistol.
Manufacturer: Umarex - T4E.
Model: P2P HDP 50.
Materials: Metal & Polymer.
Weight: 1.5 pounds (.7 kg).
Barrel: 4 inches (10.2 cm) Smooth bore.
Total Length: 8.5 inches (21.6 cm).
Power Source: 1x12 gram CO2.
Action: Semi auto - Double action only trigger.
Ammo Type: .50 Caliber Rubber Ball, Pepper Ball, Powder Ball.
Ammo Capacity: 6 Round spring fed internal magazine.
FPS: 485 (13 Joules).

View fullsize

Trigger Pull: The trigger pull on Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol is double action only but not overly long or heavy. There does not seem to be any ammo friction which is nice, so the each round feels about the same with spring tension not playing a factor. In order to use the trigger, the Pistol will need to be fully charged by loading a 12 gram CO2 and giving it a smack on the bottom of the pistol grip. This will pierce the CO2, charging the gun with pressure and activation the trigger mechanism. When the CO2 pressure becomes too low, the trigger will not function and a fresh CO2 will needed to be swapped over.

View fullsize

Accuracy: So far I have only briefly tried out the Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol here in the Replica Airguns Indoor Airgun Shooting Range, and I was rather impressed at the initial performance as it did seem to be moving the .50 call rubber balls I was shooting at close to 500 fps with a lot of energy as my pepper and cardboard target was dislodged from the backstop after a few shots. Accuracy seems to be as expected from a Paintball type pistol, so I am expecting to get around a 4-6 inch 6 shot grouping at 30 feet away which will be effective in a Less Lethal encounter.

View fullsize

Build Quality: The build quality of the Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol is good overall. It is mostly made out of plastic which is fine, as I feel that if it was mostly metal, and because of its larger size, it would be on the heavy side and not something you may want to use in a cary situation if that was your plan. There is metal where it needs to be in most of the mechanical areas including the barrel, trigger, charging system and I am sure other internal parts. The plastic parts feel well made and fit and finish is very good. The Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol does have more than enough weight at 1.5 pounds to feel solid in the hand.

View fullsize

Realism: This version of the Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol comes with the orange slide to show that it is not a lethal firearm. I have seen all black version but at this time we only sell the colored slide version. This does make it obvious that the Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol is not a “Real Firearm” designed for lethal encounters, which in Canada is a good thing since our self protection laws seem to favor the criminal more than the victim. So making sure you are using a tool designed to deter a criminal rather than harm or kill them, is hopefully going to keep you out of trouble with the law. That said the Umarex P2P HDR 50 Gen 2 CO2 Less Lethal Pistol does look like a modern semi auto pistol and functions much the same but with less force.

Pros:

• Not many options for a true less-lethal option here in Canada. This Airgun is purpose built for less lethal use so it has what I believe is enough power to actually dissuade most intruders.

• In this case I like that it is clearly marked in orange to indicate it is not an actual lethal firearm. When protecting yourself in Canada you have to be cautious with your intentions, and having clear orange markings will help in your case to show that you where not trying to give the impression of using a real firearm.

• Nice powerful 485fps with a 13 Joules energy rating.

• Can store the 12 gram CO2 in it and activate with a quick hit to the bottom of the CO2 screw.

• Holds 6 rounds in the internal magazine which hopefully gets the job done. Should be able to reload at least one more time for a total of 12 shots per 12 gram CO2.

• Fiber Optic sights make it easy to line up your target in most lighting conditions and backgrounds.

• Double action trigger feels smooth and not too heavy or long, also has a trigger safety on it.

• Can add a tactical light or laser to the under barrel picatinny rail.

• Comes with 10 rubber and 10 powder balls to get you started.

View fullsize

Cons:

• It is a bit on the larger size, not going to be easy to cary if that is your plan. I do not know what the legal ramifications of carrying this would be as it is clearly designed for protection and not for lethal encounters.

• Not a lot of shots per CO2 but the idea here is to quickly deliver as much damage as possible, this is not a weapon for prolonged gun fights.

• In Canada it does not seem you can get pepper balls easily most likely due to import regulations.

View fullsize

Comments:

The Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol is a very refreshing product for us here in Canada as up until now similar styled Rubber Ball purpose built self defense products we have been able to get, in my opinion simply did not have enough power to really be effective other than the initial intimidation of holding what looks like a firearm. If it came down to actually shooting it, I don’t believe there would be enough stopping power to deter an intruder. The Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol on the other hand has a 485 fps, 13 Joules power rating which is a rather big jump from other similar products available to us here in Canada and although it may not stop everyone, I do believe you have a much better chance protecting yourself with the Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol. If you are looking for something to have at home to help you feel a bit safer, then the Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol is the absolute best option for Canadians at this time.

• Buy the Umarex P2P HDP 50 Gen 2 CO2 Lens Lethal Pistol in Canada

• Buy Paintball Products in the US

This was a really fun Unboxing Video for me as I received something I feel a lot of Canadians might be really interested in protecting yourself in Canada is not a right especially if you use lethal force. So having a less lethal option is a really good idea.

Let’s get into what I found in this most recent Mystery Box in order of appearance…

The first item I unboxed was the KWC SP2022 CO2 NBB 4.5mm Steel BB Pistol. A pretty basic 4.5mm CO2 BB Pistol mostly made out of plastic but with a full size 21 round drop out metal magazine that does help a lot to add some much needed weight to this Airgun. It uses standard 12 gram CO2 with a claimed velocity of 450 fps.

View fullsize

Probably the most exciting item I pulled out of this months Mystery Box was the Gen2 Umarex P2P HDP 50 Rubber Ball purpose built Less-lethal solution for personal and family protection. Most of the similar Rubber ball Less-lethal Airguns I have tested generally do not pack enough punch to really be much of a deterrent in my opinion but the Gen2 Umarex P2P HDP 50 has a claimed 495 fps and when I tested it out after making this video it defiantly has some power. I would not want to be at the receiving end of this product especially in close proximity. The Gen2 Umarex P2P HDP 50 uses a traditional 12 gram CO2 and holds 6 rounds of rubber ball or powder ball, it does come with 10 of each to get you started.

View fullsize

Next I took a look at three KJWORKS Airsoft Pistols all of which came with CO2 Magazines, extension barrels and thread on tips. The KJWORKS KP-19, the KJWORKS M9A1 TBC, and the KJWORKS KP-13 TBC. As expected with KJWORKS Airsoft Guns, they looked really good and will be a joy to review and test out.

View fullsize

Last out of the Mystery Box was a new product from Umarex, a full sized Marlin Cowboy Lever Action BB Rifle in the style of the classic Red Ryder BB Gun but as mentioned in a larger size more suitable for an adult. Hey why do the kids get to have all the fun? The Umarex Marlin BB Rifle holds 650 rounds in its BB hopper and has a claimed fps pf 300. It also has an adjustable for elevation peep sight in the back with a metal lever and a Classic Faux Wood Finish.

View fullsize

View fullsize

Airguns are not toys and as so require proper storage, transportation and handling so as not to cause an accident that could be minor or even deadly.

No matter if you are handling an Airgun or a “Real Gun”, they should both be handled in the same manner even if the consequences from an accident with an Airgun may be less serious. Life long injuries like the loss of an eye are nothing to be taken lightly.

For the most part, what I talk about in this Airgun Safety 101 video can also be applied to a “Real Gun” although most countries will have stricter laws and guidelines in the storage, transportation and handling of “Real Guns” over an Airgun.

View fullsize

Storing Your Airgun:

In Canada an unregulated Airgun does not have any real specific safe storage guidelines but common sense should be used and I recommend that you at the bare minimum keep your Airgun in some sort of locked space whether it be a safe, cabinet or room that is locked all of the time.

You can also put a trigger lock on your Airgun if you do not have a lockable storage location for it.

You should also make sure to store your Airgun unloaded, at least when it comes to BB’s and or Pellets. If there is some unused CO2 in it, or it is charged with Compressed Air, but unloaded in terms of ammunition, that is OK, but again keep it in a safe location away from anyone that may be able to get their hands on it and hurt themselves or others.

View fullsize

Transporting Your Airgun:

Again, in Canada an unregulated Airgun does not have any real transportation guidelines but if you keep your Airgun out in the open and someone sees it, they will most certainly call the police and more than likely you may find yourself staring down the wrong end of a police firearm, at least until they sort it all out. This is very serious as unfortunately people have died as a result of handling their Airguns out in the open and underestimating what kind of police response that may entail.

For that reason alone, always keep your Airgun out of sight in a case or backpack or the trunk of your car. Never transport your Airgun loaded and it is best if you can lock it in a case or put a trigger lock on it for added safety when transporting it.

View fullsize

Shooting Your Airgun:

Shooting your Airgun is always the most enjoyable part of owning an Airgun, so don’t do something stupid and turn that experience into a nightmare. Treat your Airgun as if it is deadly at all times, never point it at anything you do not intend on shooting.

Keep your safety on until you are ready to shoot. Never put your finger on the trigger until you are ready to shoot it and only shoot it in a safe location with an appropriate background and backstop.

Think of the barrel of your Airgun as a light saber that if it crosses even your arm, it could cut it off. Even a BB to the arm is a serious matter. I had a friend that shot himself in the arm with a BB Gun and the BB lodged in the tendons of his wrist requiring an operation to remove it. He was a violin player so this could have ended his violin playing, but luckily he was OK.

When Your finger is not on the trigger it should be held across the trigger guard in a straight position to ensure no accidental misfires.

Wear eye protection, Steel BB’s will bounce back when they hit a hard surface and can come back with enough force to injure an eye easily. Generally Airguns do not require ear protection but some can be loud enough that you may want to wear some sort of ear protection as a precaution.

Only shoot with others that are responsible and take Gun Safety very seriously. Young people will need constant supervision and it is best to go through all of this first before even considering handing them an Airgun for the first time. Perhaps start them off with something like an Airsoft gun which will have less consequences if an accident were to take place.

Airguns are awesome in so many ways and allow for a similar shooting experience to a “Real Gun”. They can be used in more situations, with less overall cost and are a great way to learn proper gun handling and how to improve your shooting ability even if you are a “Real Gun” owner. Always be responsible with your Airgun not only for yourself but for others as it only takes a few idiots to ruin things for the rest of us. Don’t be that Idiot please!

• Buy Airguns in Canada

• Buy Airguns in the US

View fullsize

Cost:

Airguns are generally cheaper to buy and for sure cheaper to shoot. Airguns can cost as little as $50-100 to buy while real guns in similar models will cost many time more. Cost of ammo is so much less expensive than Real Gun ammo by a mile!

View fullsize

Difficulty to Obtain:

Airguns in most countries do not require any licensing or registration. Generally there are more available options in Airgun choices than Real Gun choices as restrictions often prohibit many Real Guns to be obtained.

View fullsize

Places to Shoot:

Unless you live in a super remote locations and your laws allow you to shoot Real Guns in those locations, then in most cases you can shoot an Airgun almost anywhere within reason. You can even shoot certain Airgun models in your basement. Airsoft is a great option for indoor shooting as the plastic ammo does not carry very much energy so with minimal effort you can make a backstop that will trap the ammo very well.

View fullsize

Trigger Time:

Because ammo is much less expensive and places you can shoot are easier to find, you can get a lot more Trigger Time under your belt which will also improve your shotgun with Real Guns and after all it’s just fun to shoot guns even if they are Airguns.

View fullsize

Safety:

I am not talking about safety in terms of protection. I am talking about safety as in if you do something stupid and your Gun goes off accidentally. If you accidentally fire your Airgun indoors, the bullet will not travel through floors or walls and potentially harm or kill someone on the other side. If you do manage to shoot yourself with an Airgun, the consequence are much less severe than shooting yourself with a Real Gun. That said, always treat an Airgun as if it was a Real Loaded Gun, as server injury and even death can occur even with an Airgun.

View fullsize

Ware Games and Training Situations:

There is no way you can use a standard Real Gun to shoot at people, unless extensively altered with special parts that make the Real Gun unusable to shoot live ammo. With Airguns you have the choice of using an Airsoft or Paintball gun that are both designed specifically for this purpose.

View fullsize

Pest Control:

If you have the need for pest control in an urban area where you do not want a stray bullet to travel too far or penetrate buildings if a shot where to go awry, then an Airgun designed for accuracy and power may be perfect for the job. Accuracy with target and hunting Airguns is on par if not better than many Real Guns and are have powerful enough to kill a pest humanely without having too much power for the job and having to worry as much about your background.

View fullsize

Prop Guns:

As mentioned already, Airguns can look a lot like Real Guns, so they are perfect to be used as a stand-in or Prop Gun when you need to simulate the look and function of a Real Gun. Again they are easier and cheaper to obtain and if something does go wrong, the consequences are much less severe.

View fullsize

Social Stigma:

Unfortunately Real Guns and perhaps any gun these days are looked upon with a social stigma as being the cause of the Crime rather than a tool used in a Crime. And so people blame Guns for these crimes rather than the people committing these crimes. If a person is motivated enough to do something bad, they are going to do it either way and will use whatever means is available to them to commit these Crimes. Including other means like: Knives, Blunt Objects, Poisons, Vehicles, Explosives… Sad but true! Airguns are not used in homicides or mass shootings as they are completely underpowered for a crime like this. They can however be used in crimes as a show of threat, as they do look a lot like real guns, generally people that use Airguns for real crimes, if challenged will give up immediately as they are completely outgunned. Don’t bring an Airgun to a Real Gun fight, you have better chance with a knife!

There are many types of magazines used in Airguns and some of this is dependent on the ammunition used.

For instance a stacked type of magazine often used for Steel BB and Airsoft can not be used for Pellets as pellets tend to deform when stacked in such a way since there is no metal casting protecting them from mashing into each other.

So what type of magazines do we generally see in Airguns? The most common Airgun magazines are as follows:

Simple Stick Magazine

• Mostly used with Steel BB but also found in some Airsoft Airguns.

• Some Pellet Airguns use a type of stick magazine with a rotary magazine on each end.

• Used in non-blowback and blowback Airguns.

• Can be made from plastic or steel or a combination of both materials.

Full Size Drop Out Magazine

• Used with Steel BB and Airsoft guns.

• Generally you will find these types magazines hold both the BB’s and CO2.

• Used in non-blowback and blowback Airguns.

• Commonly used with Airsoft Rifles in mid to high capacity.

• Can be made from plastic or steel or a combination of both materials.

Rotary magazine

• Used with Steel BB, Airsoft and Pellet Airguns.

• Used in non-blowback and blowback Airguns.

• Can be made from plastic or steel.

• Can often use mixed ammo types as in both 4.5mm Steel BB and .177 caliber pellet.

Belt Fed Magazine

• Like rotary magazine belt fed magazine can accommodate Steel BB, Pellet and Airsoft but are most often used with Pellet Airguns.

• Usually found in a full size magazine that also holds the CO2.

• Used in non-blowback and blowback Airguns.

• Can be made from plastic or steel or a combination of both materials.

Internal Magazine

• Used with Steel BB, Airsoft.

• Can have a hopper built in hat feeds a spring fed magazine.

• Usually found in lesser expensive Airguns but not a rule.

In this Video I go through each type of Airgun Magazine and talk about their differences and uses.

In this two part video series I compare several Air Pistols to each other to find out what type of round has the most power and accuracy. The guns I use for this not so scientific test are the KWC Model DE /50 Desert Eagle CO2 Blowback 6mm Plastic Airsoft Pistol, the EKOL ES 55 CO2 4.5mm Steel BB Pistol, the Umarex Magnum Research Desert Eagle Blowback CO2 .177 Caliber Pellet Pistol and the Umarex T4E TR50 CO2 .50 Caliber Paintball Pistol.

For this Video 2 Accuracy Test I shoot all of the above listed Airguns at a paper target setup 30 feet down range using a semi rested shooting position with my hands resting on a sand bag up front and seated on a stool in the back. It’s not perfect but works well enough. I didn’t take a ton of time with each gun since there where 4 to shoot in this Field Test Shooting Video so accuracy may have been a bit better if I took a little more time with each gun.

In Video 2 I test the power and penetration of each Airgun option shooting at a pop can, a soup can and a toilet paper roll so make sure to watch that video if you have not already watched it.

• Buy Airguns in Canada

• Buy Airguns in the US

In this two part video series I compare several Air Pistols to each other to find out what type of round has the most power and accuracy. The guns I use for this not so scientific test are the KWC Model DE /50 Desert Eagle CO2 Blowback 6mm Plastic Airsoft Pistol, the EKOL ES 55 CO2 4.5mm Steel BB Pistol, the Umarex Magnum Research Desert Eagle Blowback CO2 .177 Caliber Pellet Pistol and the Umarex T4E TR50 CO2 .50 Caliber Paintball Pistol.

For this Video 1 Power Test I shoot all of the above listed Airguns first at a pop can, then a soup can and then a toilet paper roll. The ides is to test penetration abilities with the pop and soup can and then raw force shooting the toilet paper as it will absorb all the energy from each airgun round and by gauging how much the toilet paper reacts or moves it should tell us which airgun has the most raw power or energy.

In Video 2 I will be testing accuracy using my standard 30 round paper target setup in the Replica Airguns Sea Can so stay posted for that upcoming video shortly…

• Buy Airguns in Canada

• Buy Airguns in the US

View fullsize

I often have people ask me what is more powerful in terms of one gun over another and which Airguns have more raw power, BB versus, Pellet, versus Airsoft, versus Paintball?

Well in this indoor field test shooting video I compare all of the above head to head to see which Airgun not only has the most raw power but also how well they perform on a target setup 30 feet down range since after all what does it matter how powerful a gun is if it can not hit the target!

The Airguns I used in this head to head shooting performance test where as follows:

• EKOL ES 55 Non Blowback 4.5mm BB Pistol

• Umarex Desert Eagle Blowback .177 Cal. Pellet Pistol

• Cybergun Desert Eagle Blowback 6mm Airsoft Pistol

• Umarex T4E TR50 .50 Cal. Paintball Revolver

Keep in mind the ammunition for each Airgun is very different not just in terms of materials but also their weight which will have a big effect on the energy they produce. For example for this test I used 4.6 grain 4.5mm Steel BBs, 4.6 grain 6mm Aluminum Airsoft BB’s. 6.9 grain .177 cal. Lead Pellets and 17.7 grain .50 cal. Rubber Paintballs.

Watch my YouTube Video to see how well each Airgun did in this comparison shooting test!

View fullsize

If you have not already checked out my Table Top Video for the Umarex T4E TR50 .50 Caliber Paintball Revolver then make sure to do so for specifications and a closer look at it.

The Umarex T4E TR50 .50 Caliber Paintball Revolver is an interesting Paintball pistol, it has a very different look and also uses .50 caliber Paintballs which are a little bit less common than the .68 and .43 caliber paintball gun I have been reviewing up until now. The Umarex T4E TR50 .50 Caliber Paintball Revolver is some countries is marketed as a self defense gun but those versions do have a little bit more fps and foot pounds of energy. The version I am testing is not marketed here in Canada or the US as self defense products but rather as more of a training Paintball Gun.

View fullsize

Starting with my Chronograph velocity test I placed 5 Rubber Balls through my Chronograph using a brand new CO2. The Rubber balls I am going to say are a little bit heavier than standard Paintballs and Umarex claims the Umarex T4E TR50 .50 Caliber Paintball Revolver is capable of hitting around 360 fps so with the heavier rubber balls I was expecting a little bit under the max fps. I was able to get an average of 328 fps so not bad at all.

View fullsize

Moving on to my accuracy test. I need up placing 10 of my 12 rounds into the paper target as I had two rounds that went off in what I am going to call an uncontrolled manor. The 10 rubber paintball rounds that did hit my paper target that was setup 30 feet down range all hit within about 6 inches of each other daily well centered left and right and a little bit low on the target. Gettin back to the uncontrolled shots, I had a situation where I pulled the trigger and the Umarex T4E TR50 .50 Caliber Paintball Revolver went click as you would expect but no CO2 was expelled and so no round was shot. I thought perhaps the cylinder was caught up so I went to wiggle it to try and free it up. As I did so the gun went off without my finger anywhere near the trigger. I am glad I was using rubber balls since the rubber ball hit my cabinet leaning a biota a mark but really causing any damage. This happened twice with the same cylinder, the second time I was bit more prepared for it and had the gun pointed well downrange. I was not able to recreate this problem again so perhaps the cylinder magazine was not seated properly but this still concerns me a bit.

View fullsize

Overall I really like the Umarex T4E TR50 .50 Caliber Paintball Revolver, it’s a pretty cool looking Paintball Gun with decent accuracy and power, you can even feel a little push back and barrel lift when you shoot it. I also like that you can preload a CO2 and puncture it whenever hypo are ready to shoot with a quick smack on the bottom of the grip. Just made sure to put the CO2 in the right way :)

Purchase the T4E TR50 from: The Canada Replica Airguns Store or the US Replica Airguns Store

I made a similar video about how to hold your airgun a while back but sometimes they get a bit buried in all the video I make. I feel it's really important how you grip your gun even if it's only an airgun with very little kick or recoil. Proper pistol grip is something you should use no matter what so that you can carry it forward to what ever gun you are shooting.

More kick or recoil means a firmer grip is required to hold the gun so when shooting a powder burner with lots of kick grip becomes even more important.

In this video I go over the proper two handed grip to use when holding a pistol, which hand to hold lose and which had to grip tight, how to overlap your fingers and thumbs.

One of the most common types of question I get on my Replica Airguns YouTube channel has to be something like… Why is my Airgun not working? Most of the time the amount of info about the problem is limited to something like… “It was working yesterday but now it’s not working anymore” or something like “when I pull the trigger nothing happens”. My personal favorite is… “I took my gun apart and now it doesn’t work!”

I just made a similar video for Blank Guns and as I said in that video, trying to trouble shoot a mechanical or technical problem over the internet is very difficult, this goes for cars, guns, computers or what have you…

In this Why is My CO2 Airgun Not Working video I will however cover some of the more common and obvious problems I have seen relating to why a CO2 Airgun may not be working properly. I really don’t get a lot of questions about Spring Piston or Pump Airguns so I will be focusing on CO2 Airguns in this video. There will be a lot of crossover with CO2 Airsoft guns so this video may be helpful for some of you Airsofters out there

First let’s get the super obvious stuff out of the way! 

• Did you put a new CO2 cartridge in it and is it pierced all the way?

• Did you load BB’s or Pellets into the Airguns magazine and is the magazine in the gun correctly?

• Is the safety off?

• If the gun is a blowback semi auto single action Airgun then did you pull the slide back prior to the first shot?

CO2 Related Problems:

Not all CO2 cartridges are created equal, they often have slightly different shaped nubs on them and some brands will work better than others in different Airguns. If the shape of the CO2 nub does not fit properly into the valve area then it may not pierce or it could pierce but then not allow you to tighten it all the way losing all the CO2 in the process. If the CO2 is coming form the airguns handle to CO2 Valve area then this is an indication that your problem is related to the area where the CO2 enters the airgun.

There is a seal where the CO2 cartridge buts up to the valve, this seal can be damaged or even deformed from usage or even leaving your CO2 in the gun for too long. The outside CO2 Valve seal can also take the shape of a specific CO2 nub so when you use a different brand CO2 the seal may not properly make concat with the new CO2 type you are using, again causing leaking or even the total loss of all your CO2. Watch my YouTube video on “How to Fix Leaking CO2 in an Airgun”.

CO2 Valve Related Problems:

Again, make sure that Outside CO2 Valve Seal is in good condition and any leaking is not being caused by this problem, if you have checked the Out Side Seal and everything is OK with it then perhaps there is a problem with the CO2 valve?

One indication that your CO2 Valve might be the culprit is the total loss of all your CO2 when you try to insert and tighten a new CO2 Cartridge. Usually all the CO2 will exit the barrel, not the handle or valve area. What may be happening is the valve is stuck open or the internal seal is broken or deformed. If this is the case you will have to remove the valve and have a look inside, this is a lot easier on CO2 airguns that have the CO2 valve in the magazine, if the CO2 valve is in the actual Airguns then a lot more disassembly may be required and I would recommend an Airgun technician take care of this for you.

If the gavel is in the magazine then you will have to unscrew it, you may require a special tool for this? Once the valve is out of the magazine  take a look inside and examine the internal seal, also look for any bits of metal shavings as they can disrupt the action of the valve causing leaking. Give the inside of the valve a good clean and then lubricate it with some silence spray. hopefully that fixes your problem!

BB’s getting Stuck in the Blowback Gas Tube:

I have actually made a dedicated video for this problem so I will put a link to it in the description of this video. The main reason people may have this problem is because we all like to rack that slide on our full blowback Airguns, but if you have a fully loaded magazine then each time you reach that slide without shooting the gun, you are inadvertently trying to load another BB into the breach area, the breach is only designed to hold one BB at a time so after a few racks of the slide the newly loaded have no place to go but into the Gas Tube where they can get stuck and cause having to the operation of your Full Blowback CO2 Airgun.

BB’s Rolling Out of the Barrel of Your CO2 Airgun:

This is not actually a fault of the gun but happens because of the way the gun is designed. This situation can happen with certain CO2 Airguns when the gun user pulls the trigger really slowly while the gun is point slightly in a downward position. What is actually happening is the first part of the trigger is made to draw a BB from the magazine into the breach of the gun. If the barrel of the gun does not have a rubber hop-up stopper in it then the BB is free to roll down the barrel and out of the gun. How do you fix this problem? Be more committed to your trigger pull and or shoot at a target that is not so low. Perhaps place your targets slightly higher than the gun so the barrel is not pointing down, especially if you like to take your time with the trigger :)

A Little Maintenance Can Go a Long Way!

Sometimes a good cleans is all you need to do to get things working as they should, again I have already made video Tutorial Showing “How to Clean Airguns and Blank Guns”.

What about stuff like My Airgun is jammed or my trigger is stuck or some random part fell out of my gun?

There is only so much I can cover in this video, most other problems are going to get a bit more complicated to fix and I suggest if your Airgun is not working and the suggestions I have made in this video do not solve your problem, then consider taking your gun into a gun tech.

First off I want to say it’s hard to trouble shoot technical or mechanical problems over the internet regardless of if ithas to do with guns, cars, computers or pretty much anything where unless you are there in person it’s really hard to figure out the problem.

But I will attempt to address some of the more common issues why a blank gun may not be functioning properly.

Why is my Semi Auto Blank Gun Not Cycling or Ejecting Shells?

One very common reason a blank gun may not be cycling the shells properly is because the owner has removed the barrel restrictor plug. People usually do this to make the barrel opening look more realistic but the barrel restrictor is a necessary component to increase the back pressure allowing the slide to cycle fully to the rear position so it can eject and pickup a new shell.

The blanks you are using may not have enough gun powder in them. Some blank guns require banks with more gun powder than others, again this additional internal pressure forces the slide all the way back, if the blank does not have enough gun powder in it then only a partial slide motion happens and so the discharged shell may not eject properly, in this case the user would have to clear the blank gun manually so another shell can then be picked up and loaded into the breach.

If your blank guns is dirty or not lubricated then it may act sluggish again restricting the full movement of the slide which will effect correct operation. Make sure to thoroughly clean and lubricate your blank gun, that may be a quick fix for you!

You may have a faulty extractor? The extractor is like a hook that grabs the discharged shell while the slide is in the reward position pulling or extracting the shell out of the breach. If the extractor is worn or broken then the empty shell will not be ejected from the breach so when a new shell is picked up from the magazine it has nowhere to go and usually you will get a jam-up in the ejection port area.

One final situation that can cause your blank gun to not cycle properly is to strong of a slide spring, some blank guns out of the box just come with a really heavy slide spring, so much so that even blanks with lots of gunpowder in them are still not strong enough to make the slide operate full motion. Your only option here would be to replace the heavy slide spring with a lighter one.

Why Are My Blanks Not Firing?

This is a situation where you pull the trigger and nothing happens. Lets get the obvious causes right out of the way here… Did you put blanks in your gun and are they new blanks? Did you chamber the first round in your semi auto pistol?

So now that that’s out of the way let’s look at some other reasons why your blank gun may not be firing a blank. Perhaps the firing pin is broken? Most blank guns are not made out of carbon steel and even the firing pins can be lesser quality than what you would find in a real gun so blank guns are more prone to breaking than real guns. I have seen broken firing pins in blank guns first hand so make sure to check the firing pin and that it is fully operational.

Try changing up your blanks to another brand? Again blank gun ammunition is not made to the same higher standards that real firearm ammo is made and some primers may require a little more pressure than your gun is providing. Even with real guns an ammo change may help the gun operate better.

Why is the Trigger or Hammer Not Operating Properly?

I have come across blank guns where there are mechanical problems in the trigger and hammer areas, you may be able to address this yourself but I would recommend taking your blank gun to a gunsmith since you will have to take the gun pretty much full apart to fix a problem in the trigger and hammer areas.

Of course make sure your gun is clean and lubricated, this can help a lot with the mechanical areas of your blank gun.

One problem I saw with a few EKOL Special 99’s was specifically with the single action potion of the trigger, when I would pull the hammer back it would not lock back and the hammer would often slip and fire randomly, this is rather dangerous. When I took the gun apart I found that the table top or step that the trigger was supposed to catch on was worn down on the edge so it would simply slip off. I was able to fix this by filing a new edge on the step area. Again this can happen because blank guns are not made out of as high quality metal materials as real guns.

Why does the Flame Come out the Top of My Blank Gun and Not the Front?

If you find that the flame or discharge comes out of the top of your blank gun and not the barrel, this usually does not mean anything is wrong with your blank gun. All it means is you own a top venting blank gun and not a front firing blank gun. In some countries front firing blank guns are not allowed but front venting blank guns are. The same may also be reversed in some countries, for instance here in Canada we can only import front firing blank guns with flare adaptors since our blank guns are imported under the assumption that they are to be used as signaling or flare devices.

Can I Convert my Top Venting Blank Gun into a Front Venting Blank Gun?

I really don't recommend altering a blank gun in any way as it may be a violation of your local laws and it could cause the blank gun to malfunction in a very bad way causing serious injury or even death!

In theory I suppose it may be possible to convert your Top Venting Blank Gun into a Front Venting Blank Gun but again you would need to allow for just the right amount of back pressure so a wide open barrel would not work unless it was a revolver. You can not simply remove the red plug and bingo you have a front firing blank gun because in most cases the barrel will be completely plugged in the frontal region. Not only would you need to drill out the plugged portion of the barrel but you would also have to somehow fill in the top venting area and again makes sure to allow for just enough back pressure to cycle the slide back and forth.

Hopefully this has helped some of you with blank gun issues. If you’re looking for a blank gun make sure to come down to www.ReplicaAirguns.ca and www.ReplicaAirguns.us and have a look in our blank gun area of our online stores.

I already made several review videos for both Gletcher NGT (4.5mm Steel BB) and the Gletcher NGT R (.177 Cal Pellet) Revolvers, including table top and shooting videos. So make sure to check those videos out for more information on both versions of Gletcher NGT and NGT R Revolvers.

I did however miss some noteworthy details that I wanted to cover in this video. Firstly, the real steal Nagant M1895 Revolver this Gletcher NGT is styled after has a very unique gas-sealing system that the Airgun version does not replicate or really require but it is worth mentioning.

Here is some more info on how the original Nagant M1895 Revolver Gas Seal System works:

(From Wikipedia) The M1895 by contrast, has a mechanism which, as the hammer is cocked, first turns the cylinder and then moves it forward, closing the gap between the cylinder and the barrel. The cartridge, also unique, plays an important part in sealing the gun to the escape of propellant gases. The bullet is deeply seated, entirely within the cartridge case, and the case is slightly reduced in diameter at its mouth. The barrel features a short conical section at its rear; this accepts the mouth of the cartridge, completing the gas seal. By sealing the gap, the velocity of the bullet is increased by 15 to 45 m/s (50 to 150 ft/s.) This feature also eliminates the possibility of injury through the dangerous expansion of gases from the cylinder behind the barrel, which are easily capable of severing a finger if the user holds the gun incorrectly (with a finger positioned in front of the cylinder during fire) - a noted safety-issue in conventional revolvers.

Moving on to some of the features incorporated into the Gletcher NGT NGT-R CO2 BB and Pellet Revolver that I did not point in any of my previous videos. There is an extractor rod that can be used to extract a shell, this is not really necessary on the airgun version since the shells do not expand and tighten on the cylinder as they would n the real steal Nagant M1895 Revolver built is nice that we can replicate this feature with the Airgun version. You can also remove the cylinder completely from both the BB and Pellet shooting Gletcher NGT NGT-R CO2 Revolvers. The cylinder is actually very heavy and adds a lot of weight to this compact 7 shot Revolver.

It is always nice when an Airgun is built in such a way that it replicates the real steal version as closely as possible and the Gletcher NGT NGT-R CO2 BB and Pellet Revolvers do this nearly perfectly.

Buy Gletcher NGT Revolvers in Canada

Buy Gletcher NGT Revolvers in the US

I get asked on a daily bases form many of my Vimeo Viewers about how and if there is a way to get rid of the White lettering on Airguns, Typically people are wanting to remove the intrusive Warning instructions from Airguns like the Cybergun Tanfoglio Witness 1911, the Cybergun/Swiss Arms GSG 92/P92 and many other CO2 Replica Airguns that have lettering or branding that you may want to get rid of.

In this Instructional Tutorial Video I show you how can at least tone down the white lettering and even completely remove it on some Airguns without damaging the Airguns finish underneath the white lettering. You will have to use some patience and perhaps repeat this method a few times but the end result is worth the effort.

The magical product I use to remove the white lettering on many popular Airguns is a product from Birchwood Casey called the Presto Gun Blue Pen. This product is actually designed to touch up real steel gun in areas where the blueing has worn off, lucky for us the Birchwood Casey Presto Gun Blue Pen also works well to remove the ugly white lettering from Airguns.

I have often been asked which of the Shells for the Shell Loading Revolvers work in which Shell Loading Revolvers? After all many of them look a lot alike so can you mix and match Shells for the various types of Shell Loading Revolvers?

In this Vimeo Instructional Video I test out a bunch of Shells to see which ones actually will work or not work in several of the most popular Shell Loading Revolvers.

Some of the Shell Loading Revovers Tested in this Instructional Video are:

• Dan Wesson Classic Revolver (BB, Airsoft, Pellet)

• Dan Wesson 715 Revolver (BB, Airsoft, Pellet)

• Colt Single Action Army Peacemaker (BB, Airsoft, Pellet)

• Gletcher NGT and NGT-R (BB and Pellet)

• Webley Mark VI (BB)

• KWC 357 / Umarex 357 (BB, Airsoft)

• G&G G731 (Airsoft) 

With the popularity of the KWC - Cybergun 1911 Blowback CO2 Pistols and how super realistic they are in so many ways, it is no surprise that people often ask me if they can replace the original grips with grips made for a real 1911.

The short answer is yes you can! You will have to be prepared to remove just a little bit of material from the backside of both grips near the bottom of the handle where there is an area that has been flared out to accommodate the CO2. Not really a big deal, you can use a Dremel for the quick and easy approach or even some sand paper if you don't mind taking a little more time.

In this Vimeo Video I demonstrate using grips that fit a real 1911 and show you just exactly where you will need modify them to fit on the KWC and Cybergun CO2 Blowback 1911 pistol series.

Buy the KWC Blowback CO2 1911 BB Pistol in Canada