Entries in Revolver,Single Shot

My Airgun, Airsoft Gun and Blank Gun Collection Favorites for 2014

2 Comments

It's that time once again for an end of the year Gun Collection video. And no I will not be showing off all of my guns, to show and explain them all (Approximately 200 or so?) would simply take a really long time to make and a really long time for you to watch ;)

So like last years Gun Collection Video, I take a look at some of my favorite guns from 2014.

Here is a list of the guns featured in this Collection Video with links to their original reviews: 

Categories: 4.5mm / .177 cal, 6mm, Airsoft, BB, Blank Gun, Blowback, CO2, Comparison, Full Auto, Pellet, Pistol, Review, Revolver, Rifle, Semi Auto, YouTube Video Tags:

Gletcher NGT Silver CO2 BB Revolver Table Top Review

12 Comments

Type: BB Revolver.

Manufacturer:Gletcher.

Model: NGT Silver (Replica of Nagant M1895 Revolver).

Materials: Metal & plastic.

Weight: 1.54 pounds (700 grams).

Barrel: 4 inches, smooth bore (Steel inner barrel).

Propulsion: 12 gram CO2.

Action: Revolver - single and double action.

Ammunition Type: 4.5mm Steel BB's.

Ammunition Capacity: 7 rounds.

FPS: 361fps (110m)

Trigger Pull: The trigger pull on the Gletcher NGT Silver CO2 BB Revolver is nice and crisp in both single and double action, there is virtually no trigger wiggle and the trigger pull is decent in double action while much longer and of course nice and light in single action as expected. You will want to pre-cock the hammer for accurate single action shooting but have the option of shooting double action for any action shooting you may want to do. Keep in mind you will have to individually reload each round.

Accuracy: I have not done any shooting so far with this Gletcher revolver due to some pretty awful weather conditions. I expect it will shoot nice since it has a fairly long sight radius and the open iron sights are conducive to precise shooting.

Build Quality: The Gletcher NGT Silver CO2 BB Revolver is really well made, you can tell by it's solid weight for a fairly small pistol, all of the mechanical parts feel smooth and responsive. Everything that would be metal on the real M1895 Revolver is metal including the solid one piece cylinder. Yes the grips are imitation wood but this is to be expected. The sliver finish looks great and I like the black contrasting parts that really highlight this gun.

Realism: I've have not had the opportunity to actually put my hands on a real steel Nagant M1895 Revolver but from the photos I have viewed online, the Gletcher NGT Silver is very accurate in terms of being a BB replica. Of course the shells fit steel BB's internally and the barrel has been downscale to shoot 4.5mm Steel BB's but other than that it is very difficult to tell it from a real Nagant M1895 Revolver. Even the barrel opening is recessed and looks true to scale for the original rounds used in this revolver and you can remove the one piece cylinder similar to the real version.

Pros:

  • Beautiful Silver finish.

  • Very solid and weighty gun.

  • Hammer and trigger actions are very crisp, virtually no wiggle. 

  • CO2 is well hidden.

  • Recessed barrel looks great.

  • 7 round cylinder instead of 6 like the other shell loading.

  • Cylinder can be removed.

  • Shoots in both signal and double action.

  • Grip is nice and small so great for shooters with small.

  • Shooting performance pros yet to be determined…

Cons:

  • Non adjustable sights. (Perhaps like original)

  • No speed loading on this one, one shell at a time, so make your shots count.

  • Shooting performance cons yet to be determined…

Comments:

The Gletcher NGT Silver CO2 BB Revolver is yet another addition of shell loading revolvers like the Dan Wesson and KWC 357 based revolvers, with the exception that the Gletcher NGT is more of a blast from the past and even though it comes in at a much more compact size, it holds an additional round! Another note worthy point is the fact that Gletcher has somehow figured out a way to reduce the CO2 release valve giving the Gletcher NGT a more true to scale frame size, I am talking about the distance between the hammer and the cylinder. This allows for a more realistic and true to dimension replica which in this classic revolver is super important.

My Vimeo Table Top Video of the Gletcher NGT Silver CO2 BB Revolver:

Gletcher NGT.jpg
 
Categories: 4.5mm / .177 cal, BB, CO2, Gas, Pistol, Review, Revolver, Semi Auto, YouTube Video Tags: Gletcher, NGT, Nagant M1895

KWC 357 2.5 Inch CO2 Airsoft Revolver Table Top Review

3 Comments

Type: Airsoft revolver.

Manufacturer:KWC.

Model:357.

Materials: Mostly metal with some plastic construction.

Weight: 2 pounds (900 grams).

Barrel: 2.25 inches, non-rifled.

Propulsion: 12 gram CO2.

Action: Revolver, single & double actions.

Ammunition Type: 6mm plastic Airsoft BB's.

Ammunition Capacity: 6 rounds.

FPS: 360+.

Trigger Pull: The trigger pull on the KWC 357 2.5 Inch CO2 Airsoft Revolver is good in both single and double action, even better than the Dan Wesson and S&W 327 TRR8 shell loading revolvers, most likely because the spring tension that pushes the inner barrel to make contact with the cylinder is noticeably lighter on the KWC 357's. Even the hammer is smoother and has less wiggle, just a better trigger and hammer mechanism overall.

Accuracy: This is yet to be determined but I did notice on the KWC Airsoft versions of their shell loading Airsoft Revolvers, that they do have a built in preset Hop-up by way of a small rubber bar that goes along the top of the barrel just inside the rear portion. This will create some backspin which will keep the Airsoft BB's trajectory more level but should also help them stay more accurate in general as compared to a plastic Airsoft BB that is not spinning but rather just floating through the air.

Build Quality: The KWC 357 2.5 Inch CO2 Airsoft Revolver being mostly metal has a very good build quality, perhaps even better than the Dan Wesson and S&W 327 TRR8 shell loading revolvers, even the weight of the KWC 357 is noticeably more! The only real plastic or rubber I could find was in the grips and the shell tips. Fit and finish was also good with no noticeable wear or sloppy workmanship.

Realism: The KWC 357 2.5 Inch CO2 Airsoft Revolver overall is a close copy a the real steel 357 styled revolver. I did notice the rear portion of the receiver (between the rear cylinder and hammer) to be a bit longer perhaps to accommodate the CO2 valve length, but other than that this pistol is super close to the original 357 styled revolver it is based on. Again being all metal gives this CO2 Airsoft revolver very realistic weight and feel and the loadable brass shells make using this gun almost exactly like using a real shell loading revolver but for much less cost per shot and of course a lot less recoil on the hands that a real 357 magnum or even when shooting 38 special shells for that matter ;)

Available in the:Replica Airguns Store.

Pros:

  • Shell loading revolver adds to the realism!

  • Mostly all metal design.

  • Pretty all the parts work as they would in a similar real steel revolver of this type.

  • Good overall weight, Very dense because of the shorter barrel.

  • Should have good overall power, accuracy and shots per CO2 (based on Colt Python testing).

  • Fully adjustable rear sight for windage and elevation.

  • Well hidden CO2 Screw.

  • Recessed barrel.

  • Not much white writing on the gun.

  • Nice easy Trigger pull in both single and double action.

Cons:

  • Short 2.25 inch barrel will rob power but the Dan Wesson style long barrel Airsoft revolvers are know to be a bit hot for some Airsoft games so this may be a good thing.

  • Grips may be a bit large for people with small hands.

  • All black sights with no white dots are not great on dark backgrounds or low lighting.

Comments:

The KWC 357 2.5 Inch CO2 Airsoft Revolver is yet another addition to the increasing lineup of shell loading revolvers available today in both Steel BB and Airsoft versions. The 2.5 inch reviewed here is meant to be the compact version with its snub nosed barrel but I would have to say it is not a small gun at all coming in at 2 pounds and with rather large grips and a pretty large cylinder to pack around. But then again, that may be just what you are looking for? The shorter barrel will lower the fps a bit which may bring it back in line with the requirements of some Airsoft fields and the addition of the built in preset Hop-up, this pistol should shoot pretty well out at medium and even longer ranges.

My Vimeo Table Top Review for the KWC 357 2.5 Inch CO2 Airsoft Revolver:

Categories: 6mm, Airsoft, CO2, Comparison, Pistol, Review, Revolver, Semi Auto, YouTube Video Tags: 357, KWC

KWC 357 6 Inch Chrome CO2 BB Revolver Table Top Review

12 Comments

Type: BB air revolver.

Manufacturer:KWC.

Model:357.

Materials: Mostly metal with some plastic construction.

Weight: 2.75 pounds (1218 grams).

Barrel: 5.5 inches, non-rifled.

Propulsion: 12 gram CO2.

Action: Revolver, single & double actions.

Ammunition Type: 4.5mm steel BB's.

Ammunition Capacity: 6 rounds.

FPS: 400fps.

Trigger Pull: The trigger pull on the KWC 357 6 Inch CO2 BB Revolver is good in both single and double action, even better than the Dan Wesson and S&W 327 TRR8 shell loading revolvers, most likely because the spring tension that pushes the inner barrel to make contact with the cylinder is noticeably lighter on the KWC 357. Even the hammer is smoother and has less wiggle, just a better trigger and hammer mechanism overall.

Accuracy:Based on my results shooting the Umarex Colt Python 357 which is essentially the same gun in a different finish. The results I got shooting my 6 round group from a 30 foot out semi rested position where good overall. Vertically there was about a 2 inch spread while horizontally there was about a 1 inch spread. I did find the plastic tips on the brass shells seemed to be a bit tight at first and this is when I did most of my Chronograph and target shooting. I believe the tightness effected the consistency of the FPS which also effected the accuracy especially up and down. I did get one shot out of the Umarex Colt Python 357 well over the claimed 400 fps but again the fps was rather erratic most likely because of the snug BB fit due to shell break-in.

Build Quality: The KWC 357 6 Inch CO2 BB Revolver being mostly metal has a very good build quality, perhaps even better than the Dan Wesson and S&W 327 TRR8 shell loading revolvers, even the weight of the KWC 357 came in close to a half of a pound more! The only real plastic I could find was in the grips and the shell tips. Fit and finish was also good with no noticeable chrome wear or sloppy workmanship. It will be interesting to see how the Chrome finish wears over time...

Realism: The KWC 357 6 Inch CO2 BB Revolver overall is a close copy a the real steel 357 styled revolver. I did notice the rear portion of the receiver (between the rear cylinder and hammer) to be a bit longer perhaps to accommodate the CO2 valve length, but other than that this pistol is super close to the original 357 styled revolver it is based on. Again being all metal gives this CO2 BB revolver very realistic weight and feel and the loadable brass shells make using this gun almost exactly like using a real shell loading revolver but for much less cost per shot and of course a lot less recoil on the hands.

Available in the:Replica Airguns Store.

Pros:

  • It's a revolver with actual shells! Give you the feeling of loading and shooting a real revolver.

  • Mostly all metal design.

  • lots of detail, well made, Chrome looks nice, not sure if it will ear better than the black finish?

  • Good overall weight, heaviest out of all the shell loaders.

  • Should have good overall power, accuracy and shots per CO2 (based on Colt Python testing).

  • Fully adjustable sights for windage and elevation.

  • Well hidden CO2 Screw.

  • Recessed barrel.

  • Nice easy Trigger pull in both single and double action.

Cons:

  • Grips are a bit rough.

  • Grips may be a bit large for people with small hands.

  • Black rear sight may not be great on dark backgrounds or low lighting.

Comments:

The ASG Dan Wesson shell loading revolvers reintroduced me to the joy of loading and shooting a revolver which up until that point was not that realistic of an experience when using a BB or Pellet revolver. The KWC 357 6 Inch CO2 BB Revolver like the Umarex Colt Python 357 has taken it up a notch by adding just a bit more overall weight, a smother trigger and hammer mechanism and styling this revolver on the Classic 357 magnum platform. And all of this for even less than the cost of the original Dan Wesson shell loading series CO2 BB revolvers. If you're a revolver fan, make sure to grab one of these, the Chrome finish is really eye catching and would make a great addition to your revolver collection for sure.

My Vimeo Table Top Review for the KWC 357 6 Inch CO2 BB Revolver:

 
Categories: 4.5mm / .177 cal, BB, CO2, Comparison, Pistol, Review, Revolver, YouTube Video Tags: 357, Colt Python 357, KWC

KWC 357 and ASG CZ 75 P-07 - CZ 75D Compact and Bersa BP9CC BB and Airsoft Update Video

1 Comment

Some more CO2 pistols I will be doing Table Top and Field Test video reviews for in the near future. Some of them I have already reviewed in different caliber versions, either 4.5mm Steel BB or 6mm Plastic Airsoft.

From KWC I show off two revolvers styled after the 357 and if you watched my Umarex Colt Python 357 Review then you will notice the similarities between these KWC made revolvers since they are all made by KWC. The Model 357 6 inch version is finished in Chrome and made to shoot 4.5mm Steel BB's while the KWC Model 357 2.5 inch shoots 6mm Plastic BB's and is in all black. At this time I do not have these KWC revolver listed in the Replica Airguns Canada Store but should have them listed fairly soon...

I also showcase three CO2 6mm Airsoft semi auto pistols from ASG that I have already reviewed in their 4.5mm Steel BB equivalents. The ASG CZ 75 P-07 Duty Non-blowback, the ASG CZ 75 D Compact Non-blowback and the ASG Bersa BP9CC Blowback.

Make sure to watch my quick Update Vimeo Preview Video for these fine CO2 pistols to see them up close and personal...

 
Categories: 4.5mm / .177 cal, 6mm, Airsoft, BB, Blowback, CO2, Comparison, Pistol, Review, Revolver, Semi Auto, YouTube Video Tags: 357, ASG, Bersa, CZ 75 P-07 Duty, CZ 75D, KWC

ASG AW .308 Airsoft Sniper Rifle Shooting at Longer Ranges

No Comments

While the weather is still holding on, I setup some clay pigeon targets at varying further out distances than the typically 30 feet I shoot on my deck. I paced out approximately 40-60-80-100+ foot ranges conservatively thinking this would be a good test to see if a 6mm Airsoft rifle could effectively hit targets at any of these ranges using heavy .36 gram Airsoft BB's.

Make sure to checkout my other video I shot on the same day that features my Baikal Drozd Blackbird taking it through this exact same long range shooting test.

So today I brought out an Airsoft Sniper rifle since this is what it's made to do, the model being the ASG AW .308 Airsoft Sniper. As with many of my shooting videos I captured all the fun using a bunch of different cameras and camera angles along with a dedicated lapel microphone so the audio also comes in nice and clear.

So make sure to watch my YouTube video and see how the ASG AW .308 Airsoft Sniper Rifle does shooting clay pigeons up to 100 Plus feet away...

Categories: 6mm, Airsoft, Field Test, Review, Rifle, Scope, Single Shot, Spring Piston, YouTube Video Tags: ASG, AW .308 Sniper

Gletcher M1891 Sawn Off Mosin Nagant Rifle CO2 BB Gun Field Test Review

3 Comments

I decided to do my Field test of the Gletcher M1891 Sawn Off Mosin Nagant Rifle a little different than my standard filed tests. I pretty much already did a similar Field Test for the M1891 during Table Top Review and if I used the same methods for testing I would most definitely have gotten the same results. Which by the way where a 1.75 inch group from a full 17 round magazine shooting from 30 feet back, and an average of 430 feet per second.

As you know, I have been utilizing clay pigeons in many of my shooting videos so I thought, why not have some more fun and set up a bunch of miscellaneous targets at a variety of distances ranging from 30 feet, right up to 80 feet, and see what I can hit shooting the Gletcher M1891 shooting a couple mags of 4.5mm steel BB's.

As it turned out I think I did much better than when I tried to shoot my Steel Force at targets set up long range. Anyways, watch the video, I tried to make it fun and interesting and even setup 4 cameras this time to catch all the action!

 
Categories: 4.5mm / .177 cal, BB, CO2, Field Test, Review, Rifle, Single Shot, YouTube Video Tags: Gletcher, M1891, Mosin Nagant

Gletcher M1891 Sawn Off Mosin Nagant Rifle CO2 BB Gun Table Top Review

11 Comments

Type: BB Rifle.

Manufacturer:Gletcher.

Model: Gletcher M1891 (Replica of Sawn Off Mosin Nagant "Obrez").

Materials: Metal & plastic.

Weight: 5.7 pounds (2.6kg).

Barrel: 5.5 inches, smooth bore (inner barrel).

Propulsion: CO2.

Action: Bolt - single shot - single action.

Ammunition Type: 4.5mm Steel BB's.

Ammunition Capacity: 16 rounds. (I was able to fit 17 rounds in the magazine)

FPS: 394fps (120m/s).

Trigger Pull: The trigger pull on the Gletcher M1891 is single action only, the bolt cycle does most of the work setting up the loading of a BB into the chamber and pre-cocking the bolt spring. The take up is minimal and the release is about medium to light weight. The bolt snaps forward firmly and with a nice clanking sound, you can even feel the weight of it as it moves forward.

Accuracy: I did take the opportunity to do a quick pre-test with my Gletcher M1891. I shot several rounds through my Chronograph and averaged around 430 fps which is a bit higher than the claimed 394. I also shot a couple of magazines at a paper target standing 30 feet back using a semi rested position and was about to get a 1.75 inch 17 round group which is pretty good considering I found it kind of unusual to hold the Gletcher M1891 in this manner. The Gletcher M1891 does take some getting used to since you hold it like a rifle but do not rest it against your shoulder for stability.

Build Quality: The Gletcher M1891 is really well made, you can tell by it's robust weight and how solid the action feels when you draw the bolt back and release it the first time. Everything that would be metal on the real Mosin Nagant is metal on the Gletcher M1891 including the full size dropout magazine that holds both the BB's and CO2. Yes the stock is imitation wood but in some ways it is harder than real wood and may actually hold up better. The finish looks great and I like the silver bolt, as with most electromagnetically coated finishes, the coating is not thick so it will wear off in the high spots fairly easily. Some touch up can solve this problem fairly easily.

Realism: I've never actually put my hands on a real steel Mosin Nagant Rifle but from the photos I viewed online, the Gletcher M1891looks really accurate in terms of being a BB replica. Of course the magazine has been adapted to fit CO2 and BB's but once placed in the gun it is nearly impossible to tell it from a real Mosin Nagant, or I should say a sawn off version of one. The weight of this rifle (5.7 pounds) gives it the feeling of genuineness. The only real giveaway is the imitation wood stock which looks pretty good considering. I have read online that a real Mosin Nagant stock can be adapted to fit the Gletcher M1891 so that would indicate that it is fairly true in size and construction to a real Mosin Nagant Rifle.

Pros:

  • Very Unique BB gun.

  • A piece of history you can shoot in your back yard.

  • Mostly all metal gun.

  • Nice heavy 5.7 pound weight to it.

  • Adjustable rear sight, at least for elevation.

  • Nice single action trigger.

  • Bolt action feels great and has a firm release.

  • Full size drop out metal magazine that holds both the BB's and the CO2.

  • More fps than claimed and decent accuracy, I expect to get lots of shots out of a single CO2 because of the magazine design.

Cons:

  • Stock is plastic but looks good considering.

  • No real way to adjust windage and the rear sight does wiggle a bit from side to side which could throw off the aim.

  • Electromagnetically coated finish may be prone to wear in the high spots.

Comments:

The Gletcher M1891 is one of the most interesting BB guns I have had the opportunity to review, it has history, it's kind of a pistol and kind of a rifle at the same time and in this sawn off configuration it looks both old school and modern. I could almost see it being used as the perfect zombi gun ;) Getting away from it's unique looks, the Gletcher M1891 performs very well, shooting a respectable 430 fps with accuracy that surprised me since I found it a bit hard to hold at first. There is something very gratifying about having to work a bot or lever or the hammer on a single action revolver that makes each shot just that much more precious! If you're looking for that ultimate eye catcher that people will have to take a second look at than this is the one for you.

My Vimeo Table Top Video of the Gletcher M1891 Mosin Nagant Replica BB Rifle:

 
Categories: 4.5mm / .177 cal, BB, CO2, Field Test, Review, Rifle, Single Shot, YouTube Video Tags: Gletcher, M1891, Mosin Nagant

Update Video - What is this Mystery 4.5mm CO2 BB Gun?

14 Comments

In this video I show you a very interesting 4.5mm CO2 BB replica rifle. A riffle that has a history in the Russian Military going back to the 1800's, but this one has been modified and in a way almost looks modern.

You will have to watch my YouTube update video to see what this mystery gun is, full table top review to follow this week!

Categories: 4.5mm / .177 cal, BB, CO2, Review, Single Shot, YouTube Video Tags: Gletcher, M1891

What is an Uncontrolled Firearm in Canada?

6 Comments

This Article and Video expresses my views and opinions on this matter and should not be taken as legal advice.

Main points covered:

  • Uncontrolled Firearms do not require a Firearms License within Canada to own and operate.

  • What is an Uncontrolled Airgun and Airsoft Gun?

  • What is an Uncontrolled Blank Gun / Starter Pistols?

  • What about Fully Automatic Airguns and Airsoft Guns?

  • What about Replica Guns?

NOTE: Controlled Firearms require a POL (Possession Only License) , PAL (Possession Acquisition License) or R-PAL (Restricted Possession Acquisition License) within Canada to own and operate. 

MEMORANDUM D19-13-2

Firearm – a barreled weapon from which any shot, bullet, or other projectile can be discharged and that is capable of causing serious bodily injury or death to a person, and includes any frame or receiver of such a barreled weapon and anything that can be adapted for use as a firearm.

“Uncontrolled”firearms are those devices that, although falling within the definition of a firearm in the Criminal Code, are exempt from specific legal requirements of the Firearms Act and its regulations, as well as from other legislative provisions. “Uncontrolled” firearms should not be subdivided into any of the non-restricted, restricted, or prohibited classes. The following types of firearms are deemed “uncontrolled”:

Flare, blank, rivet and industrial guns: Any device that is designed exclusively for signaling, for notifying of distress, or for firing blank cartridges or for firing stud cartridges, explosive-driven rivets or other industrial projectiles, provided that the importer intends to use it only for the purpose for which it is designed.

NOTE: (Toy guns and starter pistols do not generally qualify as firearms. However, some toy or model guns and starter pistols may be designed with very realistic mechanisms or appearances (e.g., color, size, scale, translucency) and resembling a real make and model of a firearm. In such cases, they may be considered replica firearms even if they are made of plastic, die cast zinc, or other material.)

Low muzzle velocity/energy guns: Any barreled weapon that is not designed or adapted to discharge projectiles at a muzzle velocity exceeding 152.4 meters per second (500 feet per second) and at a muzzle energy exceeding 5.7 Joules, or to discharge projectiles that are designed or adapted to attain a velocity exceeding 152.4 meters per second (500 feet per second) and an energy exceeding 5.7 Joules. Both thresholds of 152.4 mps and 5.7 Joules must be exceeded for the firearm to be considered “controlled”. This requirement exempts firearms that fire below the threshold velocity with a standard projectile, but exceed the threshold velocity when fired with a high-velocity projectile. 

Airsoft guns and certain types of paintball guns or markers may qualify as a replica firearm, if the muzzle velocity of the projectile does not cause serious bodily harm and their external features are clearly designed to resemble a specific and readily identifiable make and model of a firearm. To be considered a firearm, within the meaning of the Criminal Code, an airsoft gun must have a muzzle velocity in excess of 111.6 meters per second (366 feet per second).

NOTE: This memorandum used to state when using a .20 gram BB but does not specify this BB weight anymore?

NOTE: The term air gun is a colloquial term referring to BB or pellet guns. Such guns operate either as spring- powered, gas-powered, or electrically powered. If the muzzle velocity of the air gun is less than 152.4 mps (500 fps)/5.7 joules but still able to cause serious bodily injury to a person, it may be considered an “uncontrolled” firearm. Airsoft guns and certain types of paintball guns may qualify as a replica firearm (see paragraph 49 of this memorandum).

Replica firearms:

“Replica firearm” is defined as any device that is designed or intended to exactly resemble, or to resemble with near precision, a firearm, and that itself is not a firearm, but does not include any such device that is designed or intended to exactly resemble, or to resemble with near precision, an antique firearm.

For a device to be a replica firearm it must meet all three requirements:

  • (a) it cannot be a firearm, meaning it does not discharge a projectile with sufficient energy to cause serious bodily injury or death to a person. If the device is a firearm, then it cannot be a replica firearm (and vice versa);

  • (b) it must resemble exactly, or with near precision, a real existing firearm of an identifiable make and model. With respect to visual examination, note that the maximum observing distance is one at which the equivalent make and model of the firearm can be identified. This distance will vary from one firearm make to the next. For example: A Luger pistol has a very distinctive silhouette as compared to other makes and is therefore more readily identified from further away. The examination of the object is something more than casual, but less than detailed. The device does not need to be so close that markings are identifiable; and

  • (c) it cannot be designed or intended to exactly resemble, or to resemble with near precision, an antique firearm. 

RCMP Website "Air Guns"

1. Air guns that are "Controlled" Firearms for purposes of both the Firearms Act and the Criminal Code

These are air guns with both a high muzzle velocity (greater than 152.4 meters or 500 feet per second) and a high muzzle energy (greater than 5.7 joules or 4.2 foot-pounds). The "muzzle velocity" is the speed of a projectile at the instant it leaves the muzzle of a gun, normally expressed in meters per second or feet per second. The "muzzle energy" is the energy of a projectile at the instant it leaves the muzzle of a gun, expressed in joules or foot-pounds. Air guns need to meet both standards to be classified as "Controlled" firearms for purposes of the Firearms Act.

These high-powered air guns are subject to the same license and registration requirements as a conventional "Controlled" firearm. Owners and users are also required to store, transport, display and handle them safely in accordance with the regulations supporting the Firearms Act.

Usually, the manufacturer's specifications are used to determine what muzzle velocity and muzzle energy an air gun was designed to have. This information may be available in the user's manual or on the manufacturer's website. If the information is not available, individuals can call the Royal Canadian Mounted Police Canadian Firearms Program (CFP) at 1-800-731-4000 and ask to speak to a firearm technician to find out if the air gun is considered to be a firearm for purposes of the Firearms Act.

High-powered air rifles are generally classified as non-restricted firearms. However, the classification depends on the exact design of the air gun. Air rifles manufactured to resemble an assault rifle could be non-restricted, restricted or prohibited depending on the exact model imitated. High-powered air rifles would also be prohibited firearms if fully automatic or if they have a sawed-off barrel. They could also be restricted firearms if they have a folding stock that reduces the overall length to less than 660mm. 

Additional thought on this subject: Even though Uncontrolled Firearms are not governed by the same laws that apply to Controlled Firearms within the Firearms act and do not need to be handled or stored similar in the same way you are required to handle, transport and store a Controlled Firearm, we need to treat our Uncontrolled Airguns, Airsoft Guns and Blank guns with care and go over and above what is expected when had handle, transport and store them.

Categories: Airsoft, BB, Blank Gun, Full Auto, Gun Law, Gun Safety, Non Airguns, Paintball, Pellet, Pistol, Real Gun, Revolver, Rifle, YouTube Video Tags:

Large Umarex Order Just Arrived in Canada - Lots of Stock on Hand

No Comments

Categories: 4.5mm / .177 cal, BB, Blowback, CO2, Full Auto, Pellet, Pistol, Replica Airguns News, Revolver, Rifle, Semi Auto, Single Shot, Spring Piston Tags: Umarex

Most Powerful Air Pistol Shootout

No Comments

In this "head to head to head" pistol shootout I compare three of my more powerful, or you could say effective air pistols against each other. Shooting at some pop cans from about 30 feet away to see how destructive each one is. I don't generally recommend air pistols for pest control simply because they tend to be less accurate and powerful than rifles, especially out at the longer ranges where a magnified scope is required and notably where the pesky vermin like to hang out.

I would have to say out of the three tested in this video comparison, the Webley Alecto in .22 caliber and the Modified Drozd Full Auto BB Gun would for sure get the job done at closer ranges. The Webley Alecto simply because it can hurl a heavy grain .22 caliber lead pellet right around the 500 fps mark which will take down small pests, again at close ranges.

My second choice or even first choice depending on how active the pest are would be my modified full auto 1200 rounds per minute Drozd that hurls 4.5mm Steel BB's at over 500 fps (under 4.2 foot pounds) at a rate of 20 BB's per second! A 4.5mm Steel BB traveling at 500 fps will penetrate fur and feathers very well and with most of the 20 BB's hitting a target in a matter of 1 second, that is going to humanly put a small to even medium sized pest down for sure. And yes the Drozd becomes a pistol when yuo take the rear stock off ;)

My last choice for the job is the Xisico XSP180 in .177 caliber since like the Webley Alecto it is only a single shot, so you got to make it count and being that it has less overall energy than the Webley Alecto again I would prefer the Alecto over the XSP180.

Watch my "head to head to head" Vimeo video to see how these three pellet pistols compare:

Categories: .22 cal, 4.5mm / .177 cal, BB, Bulk Air, CO2, Comparison, Field Test, Full Auto, Modification, Multi-pump, Pellet, Pistol, Review, Single Shot, Spring Piston, YouTube Video Tags: Alecto, Baikal, Drozd, Webley, XSP180, Xisico

Webley Tempest Ultimate Back Packer Pellet Pistol Review

No Comments

A classic air pistol with its roots going as far back as the 1920's, the Webley Tempest still holds its own with todays modern sprig piston air pistols. And perhaps in one category (Back Pack Pistol) it may even outshine most of them!

Even though for the most part this website and YouTube channel are dedicated to replica style airguns, there are still many of us who plain and simple like all types of airguns and both appreciate and at times even need more of a single purpose target / hunting airgun for either pest control or taking with us while in the back country.

If you plan on spending some time in the wilderness and may even be required to fend for yourself in terms of food, you would, I am sure appreciate something like the Webley Tempest in your backpack. It will add an additional 2.1 pounds plus the weight of a tin of lead pellets but you never know, it could even save your life if you get lost or injured and need to camp out till help arrives.

The really great part about the Webley Tempest is that it is considered an uncontrolled firearm here in Canada because it just squeezes under our Canada limits in terms of fps and power so you can legally pack it around with you while out hiking, camping, backpacking or what have you. With that said I feel the Webley Tempest still has enough fps, foot pounds of energy and accuracy to wrangle up some small game at close range.

In this YouTube video I demonstrate the effectiveness of the Webley Tempest at taking down 6 "small game" sized targets at a distance of 30 feet or so shooting free hand. I also put a couple of rounds through the Chronograph using some RWS 11.9 grain lead pellets to show you that it has some decent power for such a small compact spring piston air pistol.

Categories: .22 cal, 4.5mm / .177 cal, Field Test, Pellet, Pistol, Review, Single Shot, Spring Piston, YouTube Video Tags: Webley

Swiss Arms 4 & 6 inch Full Metal Revolvers Added to the US Store

No Comments

We have just added the Swiss Arms 4 inch & 6 inch Full Metal Revolvers to the US Store, these are basically teh KWC made guns licensed through Cybergun with the Swiss Arms licensing so you can check out my Umarex Colt Python 357 since it too is the same base gun made by  KWC.

Here are the specs for these Shell loading 357 styled CO2 4.5mm BB Revolvers.

6 Inch Barrel Length Model

  • FPS: 410
  • Mag Capacity: 6 rounds
  • Power CO2
  • Length: 11.42 inches
  • Weight: 2.67 lbs
  • Full Metal, Rubberized Plastic, Textured Grips
  • Rotating Cylinder, Manual Safety, Working Ejector Rod
  • Single & Double Action
  • Includes: 1 Gun, 6 Realistic Shells, 1 Speed Loader

4 Inch Barrel Length Model

  • FPS: 344
  • Mag Capacity: 6 rounds
  • Power CO2
  • Length: 9.44 inches
  • Weight: 2.39 lbs
  • Full Metal, Rubberized Plastic, Textured Grips
  • Rotating Cylinder, Manual Safety, Working Ejector Rod
  • Single & Double Action
  • Includes: 1 Gun, 6 Realistic Shells, 1 Speed Loader
Categories: 4.5mm / .177 cal, BB, CO2, Pistol, Replica Airguns News, Revolver Tags: Cybergun, KWC, Swiss Arms

Umarex Colt Python 357 BB Revolver Field Test Shooting Review

2 Comments

First off, make sure to checkout my Table Top Review for the Umarex Colt Python 357 CO2 BB Revolver so you can get the specs and details on this fine shell loading BB pistol.

In this Field Test Shooting Video I do my traditional Chronograph test where I shoot a series of 4.5mm Steel BB's using a brand new CO2 cartridge to see what kind of real word Feet Per Second performance I can get out of the Umarex Colt Python. On this day I averages right around 390 fps which was very close to the claimed 360 fps form Umarex. The temperature was right around 24 Celsius or 75 Fahrenheit so it was neither cold or hot.

Moving on with the Accuracy Shooting Test, I set myself up 30 feet away using a semi-rested stance (Sand bag up front, standing in the back) I got one of my best ever 6 shot groups from the Umarex Colt 357, coming in at just under 1 inch. During my previous pretest, the Umarex Revolver did well but seemed to spread out a bit vertically, this may have been due to the plastic tips on the shells needing to break in for a more consistent BB fit.

The Umarex Colt Python 357 has taken it up a notch by adding just a bit more overall weight than most comparable shell loading BB revolvers, a smother trigger and hammer mechanism and styling this revolver on the Classic Colt Python platform. If you're a revolver fan, make sure to grab one of these and if you're not a revolver fan, this pistol may just change your mind :)

 Buy the Umarex Colt Python 357 in Canada

Buy the Umarex Colt Python 357 in the US

Categories: 4.5mm / .177 cal, BB, CO2, Field Test, Pistol, Review, Revolver, Semi Auto, YouTube Video Tags: Colt Python 357, Umarex

Umarex Colt Python 357 CO2 BB Revolver Table Top Review

2 Comments

Type: BB air revolver.

Manufacturer:UmarexUSA.

Model: Colt Python 357.

Materials: Mostly metal with some plastic construction.

Weight: 2.75 pounds (1218 grams).

Barrel: 5.5 inches, non-rifled.

Propulsion: 12 gram CO2.

Action: Revolver, single & double actions.

Ammunition Type: 4.5mm steel BB's.

Ammunition Capacity: 6 rounds.

FPS: 400fps.

Trigger Pull: The trigger pull on the Colt Python 357 CO2 BB Revolver is good in both single and double action, even better than the Dan Wesson and S&W 327 TRR8 shell loading revolvers, most likely because the spring tension that pushes the inner barrel to make contact with the cylinder is noticeably lighter on the Umarex Colt Python 357. Even the hammer is smoother and has less wiggle, just a better trigger and hammer mechanism overall.

Accuracy: The results I got shooting my 6 round group from a 30 foot out semi rested position where good overall. Vertically there was about a 2 inch spread while horizontally there was about a 1 inch spread. I did find the plastic tips on the brass shells seemed to be a bit tight at first and this is when I did most of my Chronograph and target shooting. I believe the tightness effected the consistency of the FPS which also effected the accuracy especially up and down. I did get one shot out of the Umarex Colt Python 357 well over the claimed 400 fps but again the fps was rather erratic most likely because of the snug BB fit due to shell break-in.

Build Quality: The Umarex Colt Python 357 being mostly metal, you would expect it to have a decent build quality and I am happy to say it does, perhaps again even better than the Dan Wesson and S&W 327 TRR8 shell loading revolvers, even the weight of the Colt Python came in close to a half of a pound more! The only real plastic I could find was in the grips and the shell tips. Fit and finish was also good with no noticeable paint wear or sloppy workmanship.

Realism: The Colt Python 357 CO2 BB Revolver overall is a close copy of the real steel Colt Python 357. I did notice the rear portion of the receiver (between the rear cylinder and hammer) to be a bit longer perhaps to accommodate the CO2 valve length, but other than that this pistol is super close to the original revolver it is based and licensed on. Agin being all metal gives this CO2 BB revolver very realistic weight and feel and the loadable brass shells make using this gun almost exactly like using a real shell loading revolver but for much less cost per shot and of course a lot less recoil on the hands.

Available in the: Replica Airguns Store

Pros:

  • It's a revolver with actual shells! Give you the feeling of loading and shooting a real revolver.

  • Mostly all metal design.

  • lots of detail, well made, fit and finish is very good.

  • Good overall weight, heaviest out of all the shell loaders.

  • Good overall power, accuracy and shots per CO2.

  • Fully adjustable sights for windage and elevation.

  • Well hidden CO2 Screw.

  • Recessed barrel.

  • Nice easy Trigger pull in both single and double action.

Cons:

  • Grips are a bit rough.

  • All black sights not great on dark backgrounds.

  • FPS seemed to fluctuate a bit 

Comments:

The ASG Dan Wesson shell loading revolvers reintroduced me to the joy of loading and shooting a revolver which up until that point was not that realistic of an experience when using a BB or Pellet revolver. The Umarex Colt Python 357 has taken it up a notch by adding just a bit more overall weight, a smother trigger and hammer mechanism and styling this revolver on the Classic Colt Python platform. And all of this for even less than the cost of the original Dan Wesson shell loading series CO2 BB revolvers. If you're a revolver fan, make sure to grab one of these and if you're not a revolver fan, this pistol may just change your mind :)

My Vimeo Table Top Review for the Umarex Colt Python 357 CO2 BB Revolver:

 
Categories: 4.5mm / .177 cal, BB, CO2, Field Test, Pistol, Review, Revolver, Semi Auto, YouTube Video Tags: 357, Colt Python 357, Umarex

Umarex Walther PPS and Colt Python 357 CO2 BB Pistol Preview Video

No Comments

In this Vimeo Update Video Preview I show you around two brand new Umarex CO2 BB pistols, the Umarex Walther PPS and the Umarex Colt Python 357, both recently added to our online Replica Airguns Store.

The Umarex Walther PPS is a full licensed CO2 BB Blowback replica of the real steel super compact Walther PPS and it compares well to the ASG Bersa BP9CC that I reviewed earlier and by the way ended up being one of my favorite compact air pistols. That said I think the Umarex Walther PPS is the new king! It is even more compact yet has great fps for a super small CO2 pistol, shot very accurate even from 30 feet out and has more blowback recoil than the larger Bersa BP9CC!

Here are some of the specifications for the Walther PPS CO2 Blowback 4.5mm BB Pistol:

  • Velocity: 350 fps

  • Length: 6.4”

  • Barrel Length: 3”

  • Weight: 1.2lbs

  • Magazine Capacity: 18 Rounds

  • Power: 12 gram CO2

  • Ammo: 4.5mm Steel BB

  • Material: Metal and Plastic

  • Action: Blowback Single Action Only

Umarex added another shell loading revolver to their collection, the fully licensed Colt Python 357 and again this revolver uses CO2 and shoots 4.5mm Steel BB's that are preloaded into 6 included brass shells. Out of all the 4.5mm shell loading revolvers to date, I have to say the Colt Python 357 is the heaviest coming in at just under 3 pounds. The trigger hammer combination is also very smooth and it has a fully adjustable rear sight for windage and elevation.

Here are some of the specifications for the Colt Python 357 4.5mm BB Revolver:

  • Velocity: 400 fps

  • Length: 11.75”

  • Barrel Length: 5.5”

  • Weight: 2.75lbs

  • Magazine Capacity: 6 Rounds

  • Power: 12 gram CO2

  • Ammo: 4.5mm Steel BB

  • Material: Almost all Metal

  • Action: Single and Double Action

Watch my Vimeo Preview Video of the Umarex Walther PPS and Colt Python 357 BB Pistols:

Categories: 4.5mm / .177 cal, BB, Blowback, CO2, Field Test, Pistol, Review, Revolver, Semi Auto, YouTube Video Tags: Colt Python 357, Umarex, Walther, Walther PPS

Webley Alecto and Tempest Back in Stock - Update Video

No Comments

Two of our most popular single shot target/hunting pellet shooters are back in stock again after what has been a rather long delay. The truth of the matter is we just didn't have a supplier for them anymore here in Canada until now. Webley as a company has been through some pretty big changes over the past several years and now hopefully it has all been worked out and supply will be steady.

Don't worry about the quality, that is still top notch! We now have the Turkish made Webley Alecto and Webley Tempest (both available in .177 and .22 caliber pellets) back in stock and I am happy to say the Alecto has even been improved with an upgraded Air Reservoir and even higher fps than before which means the Webley Alecto and the Webley Tempest now shoot right up to our maximum fps here in Canada before becoming restricted firearms so no need for an R-PAL which means happy shooting in places other than a gun range!

I would even rcomend both these Webley pistols for small pest control especially in the .22 caliber versions as they have the power and accuracy to get the job done.

Categories: .22 cal, 4.5mm / .177 cal, Multi-pump, Pellet, Pistol, Replica Airguns News, Single Shot, Spring Piston, YouTube Video Tags: Alecto, Webley

CO2 Versus Spring Versus Pump Airgun Comparison

7 Comments

In this Comparison Video I go through the benefits and shortcomings of CO2, Spring Piston and Pump Airguns. I focus mainly on Airguns but there is a bit of a crossover with Airsoft guns.

All three systems (CO2, Spring, Pump) create pressure that forces the ammunition with a high force out of the barrel. Similar to how gun powder is the source of energy for a bullet.

Here are some basic statements that best describe CO2, Spring Piston and Pump Airguns.

CO2 Airguns:

  • CO2 Airguns use the expansion of CO2 gas to create the pressure required for the ammo.

  • CO2 Airguns generally store enough CO2 for multiple shots per cartridge.

  • CO2 Airguns have a limit as to how much power they can produce since CO2 has a set vapor pressure of 850 psi, or about 56 bar at room temperature which is around 25 C or 77 F. CO2 Gas also requires a warm environment to expand so warmer temperature and longer barrels help with power.

  • Some CO2 guns can also use pressurized air tanks in place of CO2.

Spring Piston Airguns:

  • Spring Airguns use the release of a pre-cocked spring and plunger system to compress air to power the ammo.

  • Spring Piston Airguns require the cocking of the spring between each shot so they are single shot only.

  • Spring Airguns are limited to how much effort is humanly possible to cock the spring into position. If you make the spring to strong then not everyone will be able to use the Airgun effectively. Too week of a spring and the Airgun will lack power.

  • Spring Piston Airguns are known for having a fair amount of recoil and vibration when the spring moves both forward and backwards quickly inside the Airgun.

  • Spring Airguns can use either a mechanical spring or a gas spring.

Pump Airguns:

  • Pump Airguns (either Single or Multi-Pump) store air pressure in a chamber that when released, powers the ammo.

  • Most Pump Airguns require at least 1 or more pumps, often up to 10 pumps for each shot and you generally only get one shot per set of pumps. Not to be confused with PCP Airguns (Pre Charged Pneumatic) which have large pressure tanks that are recharged with a high volume of pressurized air that is capable of shooting multiple shots per charge.

  • Pump Airguns are also somewhat limited to how much effort is humanly possible since the higher the chamber pressure, the harder it will be to pump the Airgun. 

Misc Airguns:

  • Generally speaking both Spring and Multi-Pump Airguns have more potential power than a CO2 guns since CO2 has a set peek pressure limit.

  • Pump and CO2 Airguns are know to have very little recoil since the pressure is stored in a chamber and then released by a valve. No slapping back and forth of a large internal spring.

Pros:

CO2 Airguns:

  • CO2 Airguns allow for multiple shots per CO2 cartridge for more realistic action shooting.

  • CO2 Airguns do not require any human effort to charge the gun other than loading the CO2 and Ammo into the Airgun.

  • CO2 Airguns allow for true semi auto shooting ability. 

Spring Piston Airguns:

  • Spring Airguns have the potential for high velocity since the larger and stiffer the spring, the greater the output force.

  • Spring Airguns do not require anything other than your ammunition, typically either a Pellet or BB.

  • Spring Airguns are mechanically very simple which makes them very reliable and less expensive to produce than other types of Airguns. 

Pump Airguns:

  • Pump Airguns have the potential for high velocity since more pumps equals greater output force, only limited by the users strength and the pressure rating of the Airgun.

  • Pump Airguns do not require anything other than your ammunition, typically either a Pellet or BB.

  • Pump Airguns have next to no recoil which makes them very easy to shoot and highly accurate.

Cons:

CO2 Airguns:

  • CO2 Airguns require the purchase and use of CO2 or they simple do not work.

  • CO2 Airguns are very susceptible to temperature changes, especially cold temperature since CO2 needs a warm environment in order to expand. Cool down effect also plays a role in power output.

  • CO2 Airguns have a maximum set amount of power output.

Spring Piston Airguns:

  • Spring Airguns require the pre-cocking of the spring for each shot.

  • Spring Airguns can take some getting used to since the spring recoil/vibration requires a very lose grip (Military Grip) to shoot accurately with them.

  • Spring Airguns should not be stored pre-cocked since this can damage the spring, less so with gas spring versions. 

Pump Airguns:

  • Pump Airguns require pre-pumping to pressurize the air chamber for each shot.

  • Pump Airguns, especially Multi-Pump Airguns take the most amount of human effort for each shot.

  • Pump Airguns need to stored with at least one pump in them or the seals can get damaged over time.

Categories: .22 cal, 4.5mm / .177 cal, BB, Break Barrel, CO2, Comparison, Multi-pump, PCP, Pellet, Pistol, Repeater, Revolver, Rifle, Semi Auto, Spring Piston Tags:

Blowback Versus Non-Blowback Airgun Comparison

1 Comment

In this Comparison video I go through the benefits and shortcomings of both Blowback and Non-Blowback Airguns. I focus mainly on Airguns but there is a definite crossover with Airsoft guns.

Here are some basic statements that best describe both Blowback and Non-Blowback Airguns.

Blowback Airguns:

  • Blowback Airguns usually have a movable slide that moves back and forth with each shot.

  • Sometimes the blowback operation is internal (Internal bolt) so there may not be an external moveable slide.

  • Some CO2 is used to move the slide rearwards in a Blowback Airgun.

  • The Blowback motion of the slide with some blowback airguns can also cock the hammer or internal striker allowing for true single action trigger pull. But not always!

  • Some Blowback airguns have the potential for full auto capabilities since they can have a true semi auto action.

  • There is some noticeable recoil from the Blowback action simulating the recoil of a real gun.

Non-Blowback Airguns:

  • Non-Blowback Airguns can have fixed or movable slides but they will not cycle back and forth with each shot.

  • Non-Blowback Airguns tend to have less working parts since no Blowback valves are required or even a moveable slide.

  • There are some Blowback and Non-Blowback Airguns that field strip similarly to their real steel counterparts but this is most commonly found in Blowback Airguns.

  • Non-Blowback Airguns require the shooter to cock the hammer for single action shooting or use a double action trigger pull for semi auto like performance.

Pros:

Blowback Airguns:

  • Blowback Action causes a noticeable recoil which makes the airgun feel more realistic.

  • Blowback Airguns in some cases have true semi auto action with true single action triggers which mimic the authenticity of the real steel versions of the guns they replicate much better making them better training tools.

  • Having some recoil makes blowback Airguns potentially better training tools.

  • Blowback Airguns look really cool when shooting them  and are great action prop guns.

Non-Blowback Airguns:

  • Non-Blowback Airguns tend to have less working parts so less to go wrong and more reliability.

  • Non-Blowback Airguns can be more accurate since the recoil from the blowback is not a factor.

  • Non-Blowback Airguns have more potential power and more shots per CO2 since no CO2 is robbed for the blowback operation.

Cons:

Blowback Airguns:

  • Blowback operation can rob some of the power and will also rob how many shots you get from the Airgun.

  • Blowback Airguns are effected even more by cold weather and the cool down effect.

  • The recoil from Blowback Airguns can effect accuracy for some shooters.

Non-Blowback Airguns:

  • Non-Blowback airguns are generally double action when shooting semi auto and so the trigger pull will be longer and heavier.

  • Non-Blowback Airguns do not replicate the recoil action of a real gun.

  • Non-Blowback Airguns do not look as cool to shoot and are not as good of an action prop gun.

Categories: .22 cal, 4.5mm / .177 cal, 6mm, Airsoft, BB, Blowback, CO2, Comparison, GBB, Pellet, Pistol, Revolver, Semi Auto, YouTube Video Tags: